Computer Numerical Controller Machinist jobs at Professional Employment Solutions - 12 jobs

At IPS, we're all about exceptional service and exceptional people. We're looking for a passionate In-Shop Technician who loves hands-on work, takes pride in their craft, and wants to have a meaningful impact. As an In-Shop Technician, every day will be different. You'll get to apply your knowledge and skills to solve complex problems and help critical industries keep their equipment running. As a company, we prioritize safety in everything we do and offer opportunities for growth, job longevity, and continuous improvement. If you're looking for a role that values your skills and dedication, IPS is where you'll thrive. Responsibilities & Expectations: The Machinist is responsible for performing a wide range of machining operations to repair, modify, and manufacture mechanical components used in electrical and rotating equipment such as motors, generators, turbines, pumps, gearboxes, switchgear, and transformers. This position requires precision, attention to detail, and a strong mechanical aptitude to ensure all parts and assemblies meet exacting quality standards and customer specifications. Set up and operate various machine tools, including lathes, milling machines, drill presses, grinders, and shapers, to perform precision machining operations. Perform complex machining work requiring close tolerances, intricate setups, and development of unique or one-of-a-kind parts. Dismantle, inspect, diagnose, and repair or reassemble mechanical components of rotating electrical and mechanical equipment. Manufacture or modify parts based on engineering drawings, samples, or measurements. Perform machining and assembly operations for a variety of electrical equipment. Conduct basic mechanical inspections and ensure all work meets required specifications, tolerances, and safety standards. Support plating, boring, sleeving, and turning operations as required. Assist with troubleshooting and correcting mechanical or dimensional issues encountered during machining or assembly. Maintain tools, equipment, and work areas in a clean, organized, and safe condition. Train and/or direct less experienced machinists or helpers as assigned. Perform related duties and special assignments as directed by supervision. Assembly/disassembly of transformer components. Machining on a variety of base materials ranging from steel, stainless, and aluminum to wood, composites, and phenolics. Qualifications and Competencies: High school diploma or equivalent; technical or trade school training preferred. 2-10 years of machining experience depending on skill level (D through A). Strong knowledge of machining practices, measuring tools, and mechanical assembly. Ability to read and interpret blueprints, engineering drawings, and technical specifications. Ability to produce basic mechanical drawings Ability to operate both CNC and manual lathes and mills Demonstrated proficiency in setup, operation, and maintenance of manual machine tools. Understanding of safe work practices and proper use of PPE in a shop environment. Strong problem-solving skills and mechanical aptitude. Ability to work independently and collaboratively as part of a team. Ability to work overtime, weekends, and nights as required Physical Requirements: Frequent standing, walking, lifting (up to 40 lbs), and use of hand tools. Ability to stand, stoop, kneel, and bend for prolonged periods of time Ability to lift, push, pull, carry items up to 40 lbs. You'll thrive at IPS if you… • Lead with integrity and prioritize safety. You demonstrate high standards and commit to a safe, ethical workplace. • Value teamwork and accountability. You work well with others, take responsibility, serve others, and deliver on your commitments. • Focus on the customer. You are dedicated to providing an unmatched customer experience and exceeding expectations. • Have an entrepreneurial spirit. You're proactive, innovative, and thrive in a fast-paced environment. • Communicate effectively and with purpose. You keep everyone informed with clear, concise communication. • Stay curious and love to learn. You continuously seek new knowledge and grow personally and professionally. Who We Are: At Integrated Power Services (IPS), we're committed to empowering you to make a meaningful impact. As the industry's leading and fastest-growing service provider, IPS offers single-source electromechanical and power management solutions to enhance the reliability of critical infrastructure across North America and the United Kingdom. We serve over 30,000 essential customer locations, from renewable energy pioneers to hospitals, manufacturers, and municipalities, helping them avoid costly downtime and ensure mission-critical operations. When you join IPS, you're joining a team that's revolutionizing equipment and process reliability across diverse sectors, from power generation to petrochemicals, and beyond. You'll learn from industry experts, grow alongside a talented workforce, and be part of a company that is built on the Shared Values of Safety, Integrity, Teamwork, Accountability, Customer Focus, and Entrepreneurial Spirit. Benefits: Paid Time Off (PTO) 401k Employer Match Bonus Incentives Tuition Reimbursement Program Medical, Dental and Vision plans Employee Assistance Program (EAP) And more! Pay Rate Details: $27.98 - $43.87/hour IPS is committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status. Any offer of employment is contingent upon the successful completion of a background and driving record investigation. As a federal contractor, our company is committed to maintaining a safe and drug-free workplace. Candidates for this position are required to complete a pre-employment drug screen successfully. The drug screening process will include testing for substances that may impair one's ability to perform the job safely and effectively. LI#-JR1

We are seeking an experienced CNC Sheet Metal Programmer to create and optimize programs for punch presses, lasers, and press brakes. The ideal candidate will work closely with engineering and production teams to ensure parts are manufactured accurately and efficiently, meeting production timelines and quality standards. Position Details: Full-time position Shift: 1:00 PM - 9:30 PM Hourly Rate: $25.00 - $33.00 per hour Responsibilities: Read and interpret technical drawings and 3D models. Generate CNC code from CAD files for punching and bending operations. Optimize setups and processes to reduce production time. Maintain and manage tooling for part programs. Create setup sheets and maintain program documentation. Recommend and implement process improvements to enhance efficiency and reduce costs. Ensure all part files are updated and maintained at the latest revision level. Collaborate with team members to resolve technical challenges. Requirements: Proficient with CAD software (SolidWorks preferred). Experience with CNC programming for punch presses and press brakes. Knowledge of punch and brake tooling, K factors, and bend allowances. Ability to read and interpret technical drawings, including GD&T. Strong understanding of quality standards and shop math, including fractions, percentages, ratios, and geometry. Excellent problem-solving skills and ability to troubleshoot machining issues. Strong verbal and written communication skills. Minimum 5 years of sheet metal experience; programming experience preferred. High school diploma or equivalent required; engineering degree is a plus. Why Apply: If you're a detail-oriented CNC professional who enjoys solving technical challenges and improving processes, this is a great opportunity to grow your career in a supportive and innovative environment. Join us and be part of a team that values your skills, ideas, and contributions. Apply today to take the next step in your career!

Tradesmen International is immediately hiring experienced Machinist for a project located in Lafayette, CO. This is a first shift opportunity and the pay range is $21-$24/hour based on experience and skill level. If you are a Machinist and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: * Grind files & polish metal using hand & power tools * Prepare items for welding operations * Apply final finish to completed products * Fabricate Ionex manufactured parts & products for delivery * Verify hand tools & finishing equipment are maintained & functional * Identify & report issues & challenges relative to metal finishing equipment, processes, & personnel * Implement corrective measures to overcome metal finishing obstacles * Other tasks as assigned Requirements: * Must demonstrate knowledge of concepts, practices & procedures commonly used within the metal finishing & manufacturing fields * Must be able to read & write English * Must be able to read & understand blueprints * Must have basic tools Company Details Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: * Tradesmen+ Rewards Program - earn points for hours worked * Vacation Pay * Health insurance * 401(k) profit-sharing savings plan Find our app, TradeGig, in the App store to see opportunities, set notifications and click to express interest! Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website. Recruiter Name Richard Herrera Location US-CO-LAFAYETTE

**CNC Machinist - Aerospace Components** **Pay:** $30-$45 **Job Type:** Full-Time **About Us** As a trusted partner to leading aerospace OEMs, we deliver mission-critical components with uncompromising precision. Join our elite team of innovators shaping the next generation of aerospace technology. **Responsibilities** + Set up and operate CNC machines for precision machining operations. + Read and interpret **blueprints, engineering drawings, and specifications** . + Monitor machine performance and make adjustments to ensure quality and efficiency. + Inspect in-process and finished parts using precision measuring instruments. + Collaborate with team members to troubleshoot and resolve machining issues. + Follow **QMS processes and procedures** , including work instructions. + Maintain a clean and organized work area. **5-Axis Responsibilities** + Set up and operate advanced **4- and 5-axis CNC mills** . + Manufacture tight-tolerance, complex components from aerospace-grade alloys. + Interpret and execute part programs, blueprints, and **3D CAD/CAM output with GD&T** . + Perform tool selection, in-process inspections, and adaptive machining adjustments. + Work closely with engineering and quality teams to meet **AS9100 standards** . **Qualifications** + High school diploma or equivalent. + Proven experience as a **CNC Machinist, Lathe Machinist, or 5-Axis Machinist** . + Strong knowledge of machining techniques and tools. + Excellent attention to detail and problem-solving skills. + Aerospace industry experience is a **PLUS** . + Experience with **Kitamura, Mazak, Grob** machines is a **PLUS** . + Familiarity with **Mazak Integrex and Quikturns** (CNC Lathe) is a **PLUS** . + 5-Axis experience is a **PLUS** . **Why Join Us?** + Work on cutting-edge aerospace components. + Competitive pay and benefits. + Opportunities for growth and advancement. + Collaborative, high-performance team environment. **Apply today and help us build the future of aerospace!** **Job Type & Location** This is a Contract position based out of Wheat Ridge, CO. **Pay and Benefits** The pay range for this position is $30.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Wheat Ridge,CO. **Application Deadline** This position is anticipated to close on Jan 23, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

For over 70 years, Yoh has provided the talent needed for the jobs and projects critical to client success, by delivering comprehensive workforce solutions that focus on Aerospace & Defense, Engineering, Government, Health Care, Life Sciences, Information Technology and Telecommunications. Yoh fulfills immediate resource needs and delivers managed and outsourced solutions. • Offers 2 years of experience in Sourcing and Full-Cycle Recruiting. • Manages all aspects of the talent acquisition process including sourcing, candidate identification, compensation analysis, offer proposals and offer negotiation, pre-employment clearance validation, etc. • Ability to assess qualifications / personality and corporate culture fit, connect with and gain respect / trust of both candidates, and handle multiple searches/projects. • Identifies potential candidates utilizing various recruiting tools including Monster, CareerBuilder, Internal Database, Referrals, Cold Calling, etc. • Excellent communicator with a strong work ethic, dedicates to building and strengthening relationships with clients, colleagues, candidates and management. • Maintains and manages strong client relationship with various consumers/customers and establishes pipeline management in a high volume, goal driven environment. Location: 1275 N Newport Rd Colorado Springs CO USA 80916 Position: Machinist Company: UTC Aerospace Pay Rate - $12 -$16/hr Schedule: 1 First shift position 1 Second shift position - (2:30 - 11:15pm) Job Description Summary Essential Responsibilities: • Operate cold saw and automated band saw • Stock and identify all incoming cell raw material • Cut incoming raw material to size per order • Maintain correct inventory of raw material in cell • Maintain proper condition of measuring instruments • Maintain proper cutting conditions of saws • Meet or exceed required output hours • Maintain a clean and hazard-free work cell • Achieve required part cosmetics with manual operations • Cross-train on different types of machining centers • Perform all required preventive maintenance in work cell • Participate in all team stand-ups and use safe ergonomic practices in performing job • May perform other job duties as required • Look for ways to eliminate safety hazards and improve the overall safety of the workplace • Provide continuous improvement ideas in order to support lean and ACE initiatives • Ensure quality products utilizing UTAS quality procedures • May perform other job duties as required and available for overtime as necessary Qualifications Basic Qualifications Education Required: High School Diploma or equivalent Experience Required: • 2 years relevant CNC experience Skills Required :• Read and understand English • Ability to set up and operate cold and automated band saws according to specifications and tooling instructions, while under the supervision of others • Ability to read blue prints with some supervision • Basic mechanical knowledge • Basic Computer Skills • Basic Shop Math Skills • Willing to cross-train • Ability to work in a team environment • Ability to work in a high-paced environment to support and stage other machining cells with daily work • Willing to perform hand and body warm-up exercises to minimize potential for repetitive motion injuries • Ability to lift up to 40 lbs • Must be able to work in a standing position up to 8 hours per day • Availability to work overtime as needed Attendance Standards: • Consistently be at work and communicate appropriately any attendance issues with your supervisor as per policy • Consistently at their work station at the appropriately scheduled time • Does not abuse breaks and/or departure times Additional Information All your information will be kept confidential according to EEO guidelines. IF THIS IS THE JOB OPPORTUNITY FOR YOU GIVE ME A CALL AT ************ or email me at **********************! I want to know more about your preferences. If in case you know someone who might be interested for this, feel free to pass it along. I look forward to hearing from you!

**Machine Shop Operator - Weekend Shift** **Mead, CO** | **$22/hr** | **Friday-Sunday, 12-hour shifts** (36 hours paid as 40 with 4 bonus hours) **Why This Role Rocks** Looking for a hands-on role in a fast-paced, high-quality machine shop? Our weekend team in Mead, CO is growing, and we need a skilled Machine Shop Operator who takes pride in doing things right. If you enjoy solving problems, keeping machines humming, and contributing to a team that values efficiency and quality, this could be your perfect fit. **What You'll Be Doing** + Set up jobs: build tools, fixturing, prep materials, and load work/tool offsets + Work with programmers to monitor job progress and suggest improvements + Troubleshoot and resolve issues quickly to minimize downtime + Load and unload equipment and materials safely + Offer ideas to improve shop efficiency and workflow + Perform routine preventive maintenance on machinery + Record readings and log data for machined parts + Support daily operations while ensuring quality standards are met **What We're Looking For** + Experience in machine shop operations or a similar hands-on field + Comfortable using shop and quality lab tools/equipment + Strong problem-solving and critical thinking skills + Physically able to handle shop work + Thrives in a fast-paced, dynamic environment **What You'll Get** + 3-day weekend schedule with 4 days off + $22/hr, with 36 hours paid as 40 (includes 4 bonus hours) + 401(k) with company match + Paid time off + Training and development opportunities to grow your skills ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.

Precision Sheet Metal Fabricator Compensation: $18 - $26/hour We're looking for a talented Precision Sheet Metal Fabricator to join a high-performance manufacturing team. If you thrive on tight tolerances, advanced tools, and producing work that meets exacting standards, this could be your next opportunity.What You'll Do: Step into a fast-paced fabrication environment where your craftsmanship directly impacts product quality and performance: Interpret detailed blueprints and engineering drawings with precision. Operate CNC machinery including press brakes, punch presses, laser cutters, shears, and hardware insertion equipment. Shape, bend, and assemble precision sheet metal components to exact specifications. Conduct in-process inspections using calipers, micrometers, and other measurement tools. Collaborate with engineers and quality teams to troubleshoot, optimize, and improve processes. Maintain a safe, organized workspace and perform basic machine maintenance. Use hand tools and pneumatic equipment confidently and safely. What You Bring: 2-5 years of experience in precision sheet metal fabrication. Technical certification or vocational training is a plus. Strong ability to read and interpret mechanical drawings and work orders. Knowledge of aluminum, mild steel, gauges, and fabrication methods. Hands-on experience with hand tools, power tools, and CNC equipment. Excellent attention to detail and ability to work independently. Physically able to lift up to 50 lbs and stand for extended periods. Bonus Skills: Experience in aerospace, medical, or electronics fabrication. Familiarity with machine file software and CNC interfaces. Tooling setup and selection experience. Basic computer skills for production tracking or machine operation. Why Join Us: Bring your skills to a team where precision meets purpose. Enjoy a workplace that values quality, innovation, and excellence: Comprehensive Health Coverage - Medical, dental, and vision plans. Financial Security - 401(k) with company match. Peace of Mind - Life and disability insurance, with optional coverage for hospital stays, critical illness, and accidents. Time to Recharge - Paid holidays, vacation, and personal time off.

Tradesmen International is immediately hiring experienced Machinist for a project located in Lafayette, CO. This is a first shift opportunity and the pay range is $21-$24/hour based on experience and skill level. If you are a Machinist and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: Grind files & polish metal using hand & power tools Prepare items for welding operations Apply final finish to completed products Fabricate Ionex manufactured parts & products for delivery Verify hand tools & finishing equipment are maintained & functional Identify & report issues & challenges relative to metal finishing equipment, processes, & personnel Implement corrective measures to overcome metal finishing obstacles Other tasks as assigned Requirements: Must demonstrate knowledge of concepts, practices & procedures commonly used within the metal finishing & manufacturing fields Must be able to read & write English Must be able to read & understand blueprints Must have basic tools Company Details Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: Tradesmen+ Rewards Program - earn points for hours worked Vacation Pay Health insurance 401(k) profit-sharing savings plan Find our app, TradeGig, in the App store to see opportunities, set notifications and click to express interest! Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website. Recruiter Name Richard Herrera Location US-CO-LAFAYETTE

The position is responsible for programming, setting up, and operating CNC machines to manufacture precision components for various industries, including aerospace, medical, technology, and automotive. The role requires a strong focus on quality, safety, and adherence to company and industry standards. Essential Duties and Responsibilities CNC Programming and Machining Utilize Mastercam to create and modify CNC programs based on customer-provided blueprints and specifications. Set up and operate 3, 4, & 5-axis CNC machines to produce precision components. Perform simulations and first article inspections to ensure program accuracy and part conformity. Make necessary adjustments to machine settings to maintain product quality and meet tight tolerances Product Quality Conduct in-process inspections using calibrated measuring equipment (e.g., calipers, micrometers, 5-axis automated CMM) to verify part dimensions and tolerances. Document inspection results and maintain accurate records in accordance with quality control procedures. Identify and address nonconforming products, implementing corrective actions as required. Shop Safety and Material Handling Adhere to all shop safety protocols, including the use of personal protective equipment (PPE) and machine guards. Maintain a clean and organized work area to prevent accidents and improve efficiency. Safely handle and store raw materials and finished products to prevent damage and contamination. Ensure all materials used are approved and free from counterfeit or unapproved parts. Calibrated Equipment Use Properly use and maintain all calibrated measuring tools, ensuring they are regularly calibrated and in good working condition. Report any damaged or out-of-calibration equipment to the Production Supervisor for immediate action. Foreign Object Debris (FOD) Awareness Maintain vigilance for foreign object debris in the work area and on the machines. Follow procedures to prevent FOD from contaminating products and workspaces. Nonconforming Product Process Segregate and mark nonconforming products clearly, and follow established procedures for rework, scrap, or customer concession. Participate in root cause analysis and corrective action implementation to prevent recurrence of nonconformities. Scrap Handling Dispose of scrap material according to company procedures, ensuring it is properly marked and stored until final disposition. Prevent unauthorized use of scrap parts by ensuring they are rendered unusable before disposal. Knowledge, Skills, and Abilities Skills and Competencies Strong understanding of shop safety practices and material handling procedures. Proficient in reading and interpreting blueprints, technical drawings, CAD models, and specifications. Excellent problem-solving skills and attention to detail. Ability to use and maintain calibrated measuring equipment properly. Knowledge of quality control principles and experience with AS9100D or ISO 9001 standards is a plus. Physical Requirements Ability to lift and carry materials weighing up to 50 pounds. Standing, walking, and performing repetitive tasks for extended periods. Manual dexterity and hand-eye coordination for operating CNC machines Education & Experience High school diploma or equivalent required; technical certification or associate degree in CNC machining or related field preferred. Minimum of 3 years of experience in CNC programming and machining, with proficiency in CAD/CAM software.

**Machinist Operator - CNC Specialist ($25-$32/hr)** **Pay:** $25-$32/hour (based on experience) **Schedule:** Full-Time **About the Role** We're seeking a **skilled Machinist Operator** to run advanced CNC machinery, including vertical milling, turning, Swiss turning, and 5-axis multitasking equipment. You'll produce precision parts for industries such as **medical, aerospace, and defense** , working with cutting-edge automation like robots, bar-feeders, and palletizing systems. **Responsibilities** + Operate CNC machines to produce high-quality parts per specifications + Inspect parts using precision measuring tools + Perform preventive maintenance and troubleshoot minor machine issues + Document production processes and quality control measures + Follow strict safety protocols and maintain ITAR compliance **Qualifications** + High school diploma or GED + Knowledge of CNC machining processes and advanced manufacturing technologies + Ability to read and interpret complex blueprints + Experience with precision measuring instruments + Strong problem-solving skills and attention to detail + Ability to stand for extended periods and lift up to 50 lbs **Skills** CNC Machining, Vertical Milling, Turning, Swiss Turning, 5-Axis Machining, Blueprint Reading, Quality Control, Precision Measurement **Why Work With Us** + Competitive pay: $25-$32/hour + Clean, organized facility with state-of-the-art CNC technology + Safety-focused, team-oriented environment + Opportunities for continuous learning and advancement **Apply today and join a team that values precision, innovation, and growth!** **Job Type & Location** This is a Permanent position based out of Englewood, CO. **Pay and Benefits** The pay range for this position is $83200.00 - $114400.00/yr. Benefits, 401k, Dental, Medical, etc. **Workplace Type** This is a fully onsite position in Englewood,CO. **Application Deadline** This position is anticipated to close on Jan 16, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Store Staffing is seeking a CNC Machinist for our client in Pueblo, CO! This role is perfect for someone who enjoys precision machining, problem-solving, and working with both mills and lathes. You will be programming, setting up, and operating CNC equipment while using SolidWorks and Mastercam to produce high-quality components. Pay Range: $28-31/hour Location: Pueblo, CODuration: Long term temp with possibility of hire Requirements: 3+ years of CNC machining experience Experience with both CNC mills and CNC lathes Proficiency with SolidWorks and MasterCAM for programming and modifications Ability to read and interpret engineering drawings and blueprints Strong understanding of tolerances, measurements, and inspection tools Ability to work independently and as part of a team High attention to detail and commitment to quality CNC Machinist Duties: Set up, operate, and troubleshoot CNC mills and lathes Program or edit programs using MasterCAM and SolidWorks models Inspect finished parts to ensure they meet quality and dimensional standards Perform machine adjustments, tool changes, and routine maintenance Collaborate with engineering and production teams to resolve issues Maintain accurate documentation for jobs, tooling, and quality checks Identify opportunities for process improvement and efficiency