Quality assurance technician jobs in Victorville, CA - 218 jobs

Definition Under general and/or immediate supervision from higher level engineering staff, performs a variety of journey level technical drafting, office and field engineering work; and provides assistance and information to the public. May exercise functional and technical supervision over less experienced technical staff. Position Snapshot/A Day in the Life: The Engineering Technician II performs routine drafting and technical engineering work in support of municipal infrastructure projects. Responsibilities include assisting with engineering design and planning, providing customer service, and performing technical office and field duties related to updating, maintaining, and analyzing the Public Works and Engineering Department's Geographic Information System (GIS) and utility infrastructure data. This position coordinates and conducts research, field data collection, and condition assessments of infrastructure assets, using GIS, database, and information management tools to support capital planning and ensure compliance with regulatory requirements. Essential Functions Engineering Technician II -This is the full journey level in the Engineering Technician series. Employees within this class are distinguished from the Engineering Technician I By the performance of the full range of duties as assigned including the moderately complex duties of drafting, office and field engineering work. Employees at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. This class is flexibly staffed and is normally filled by advancement from the I level, or when filled from the outside, requires previous work experience. ESSENTIAL FUNCTIONS:Incumbent must have the ability to: Review and process tract maps, parcel maps, of line adjustments, grants of easement, and street right-of-ways for recordation. Verify fulfillment of conditions of approval for new subdivisions; perform on-site inspections to verify survey monuments related to parcel maps and lot line adjustments. Prepare and draft technical engineering plans for construction of streets, alleys, storm drains, water lines, and other public improvements. Provide public assistance at counter and over the telephone. Prepare quantity and cost estimates for engineering projects. Maintain a variety of maps and records including tract maps, parcel maps, lot line adjustments, easements, street and address changes. Review engineering plans to determine appropriate layout of construction projects. Perform on-site inspections to obtain information; determine angles and set grade stakes, hubs, turning points and benchmarks using appropriate surveying techniques; locate and measure boundary lines, right-of-ways, and land grades. Make and check mathematical calculations related to surveying, drafting and basic engineering. Maintain accurate survey records in the form of field notes and sketches. Participate in a variety of engineering design and planning work related to municipal engineering projects. Answer questions and provide information to the public concerning engineering activities. Assist in development and maintenance of the record keeping and filing systems. Prepare, assemble and distribute copies of maps, charts and blueprints. Answer questions and provide information to the public concerning engineering activities. Perform any other tasks or functions deemed necessary to the daily operations of the employer. THE ABOVE LIST OF ESSENTIAL FUNCTIONS IS NOT EXHAUSTIVE AND MAY BE SUPPLEMENTED AS NECESSARY BY THE EMPLOYER. WORKING CONDITIONS: Position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, bending, and stooping in the performance of daily activities. The position also requires grasping, repetitive hand movement and fine coordination in preparing reports using a computer keyboard. Additionally, the position requires near and far vision when preparing and reading written reports and other work related documents. Acute hearing is also required when providing phone and counter assistance. Experience and Training Guidelines EXPERIENCE AND TRAINING GUIDELINES: A combination of experience and training that would likely provide the required knowledge and abilities is qualifying. The employee must have knowledge of: Engineering Technician II: In addition the qualifications of Engineering Technician I, knowledge of: Terminology, methods, practices and techniques of drafting. Trigonometry as applied to the computation of angles, areas, distances and traverses. Elementary surveying techniques and practices. Engineering maps and records. Ability to: Perform moderately complex engineering and mathematic calculations with speed and accuracy. Understand and follow written instructions and sketches. Use and care for drafting, surveying, and mechanical instruments and tools. Work independently in the absence of supervision. Experience: Engineering Technician II - Two years of increasingly responsible experience performing drafting and technical engineering work. Education: Equivalent to completion of the twelfth grade supplemented by specialized training in drafting, surveying or a related field. The City of Fontana has a flexible benefits plan. This plan allows for employees to select benefits based upon their individual needs. Full-time and Classified Part-time employees are eligible for benefits. Please to view our excellent employee benefit options. 01 What is your highest level of education? High School graduate or equivalent Some college Trade school graduate or Apprenticeship Associate's degree in related field Bachelor's degree in related field Bachelor's degree or higher in non-related field Equivalent to Bachelor's degree in related field Master's degree or higher in related field None of the above 02 Please indicate how much experience you have in performing drafting and technical engineering work. No experience Less than one (1) year. One (1) year or more year(s) but less than two (2) years. Two (2) or more years but less than four (4) years. Four (4) or more years but less than six (6) years. Six (6) years or more but, less than eight (8) years. Required Question

Job Posting Start Date 01-20-2026 Job Posting End Date 04-03-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Quality Control Inspector in USA, Fontana Ca. Reporting to the Quality Assurance Manager, is responsible for providing quality control and assurance throughout all phases of the production process including inspections of raw materials, in-process, and final products. What a typical day looks like: Performs visual inspections and other specified tests of incoming materials, in-process production, and finished products to confirm product meets drawings and specifications Uses observation and testing to identify faults in materials and manufacturing process Documents inspection results by completing inspection reports, logs, and checklists Communicates with supervisor to determine appropriate recommendations and remedies for questions regarding products Maintain quality records as needed Keeps inspection and measurement equipment operating by following operating instructions; and notifying management when repairs are necessary. Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent 1-3 years' experience of quality inspections in a fabrication/manufacturing environment. Previous experience in an ISO 9001 Certified company Strong analytical, problem-solving, detail-oriented skills Thorough understanding of the product and/or process being inspected Ability to read blueprints, specifications, and technical documents Excellent written and verbal communication skills Ability to handle multiple projects while maintaining attention to detail with the task at hand Proficient in Microsoft Office Suite or related software as needed to complete reports. What the physical requirements are: Prolonged periods standing and performing repetitive tasks. Must be able to lift up to 35 pounds at times. Dexterity and accuracy as needed to operate testing equipment or gauges. Must be able to bend, stretch, kneel, and squat to perform inspections Must be able to traverse production facility to conduct inspections Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$18.33 USD - $24.75 USD HourlyJob CategoryQuality Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).

Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? SALARY: $33.83/hr + 4.25 hours of daily OT SHIFT: 12 hours (rotating days/nights) every quarter COMPANY: ROLE SUMMARY: Sitting behind a desk all day was never your style. Rolling up your sleeves and solving tangible problems? That's more like it. If you are passionate about maintenance and troubleshooting while working in a fast paced environment, Anheuser-Busch could be your last stop in fulfilling your career. Our Maintenance Technicians are the key in guaranteeing that our quality is where it needs to be: the very best. If you are looking for a new challenge, come join our team today! As a Maintenance Technician, you will operate, maintain, troubleshoot, and repair high speed manufacturing equipment. You would also be responsible to perform quality checks by using powerful quality reporting systems. If you think you've got what it takes, we want to hear from you! JOB RESPONSIBILITIES: Operate, maintain troubleshoot and repair high speed manufacturing equipment Responsible for prioritization of operation and maintenance on multiple pieces of manufacturing equipment Perform quality checks and recording them in our automated quality control systems Interpret data to make quality and productivity decisions, we're a data driven company Perform routine and emergency maintenance on process equipment Maintain our work area in accordance with all sanitation and housekeeping standards, safety is our first priority JOB QUALIFICATIONS: High School Diploma or GED 1-3 years of industrial experience, preferably in a high-speed manufacturing or packaging environment Proficient in mechanical troubleshooting Able and willing to work a rotating 12-hour and other alternate work schedule, including day and night shift rotations, and required weekend and holiday hours Able and willing to work mandatory overtime as required Superior work history, including good attendance Knowledge of safety policies and procedures WHY ANHEUSER-BUSCH: At Anheuser-Busch, our purpose is to create a future with more cheers. For more than 165 years, we have delivered a legacy of brewing great-tasting, high-quality beers that have satisfied beer drinkers for generations. 99 percent of the products we sell in the U.S are made in the U.S. with more than $700 million in high-quality ingredients sourced from American farmers and more than $7 billion in goods and services purchased from U.S. suppliers, and we have invested nearly $2 billion in our 100 facilities across the country over the past five years. Through these investments, and as a leading American manufacturer and the nation's top brewer, we drive economic prosperity nationwide through investments in our people, facilities, and communities. We are the only brewer that invests in the U.S. at this scale. BENEFITS: Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending Accounts Life Insurance and Disability Income Protection 401(k) Retirement Savings options with a company matching contribution Chance to work in a fast-paced environment among a company of owners Free Beer! #AC-E

THE ROLE: QA Supervisor * Travel Requirement: No * Shift: 2nd Shift 3:00pm to 11:30pm * FLSA Status: Non-Exempt * Employment Category: Full-Time Regular * Pay Range: $25.50 - $34.50/Hr Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This job contributes to Evolution Fresh success by ensuring product quality information is provided to all necessary parties, samples are maintained, and raw materials have complete traceability to the finished product. Models and acts in accordance with Evolution Fresh guiding principles. JOB DUTIES: * Evaluates and documents quality of finished goods and raw materials * Reports quality conditions as needed * Evaluates condition of the manufacturing facility and warehouse space to ensure compliance to regulatory and HACCP requirements * Audits programs in support of quality objectives * Maintains a clean and organized working environment * Follows safety regulations. Participates in process improvement activities. Meets performance schedules * Maintains product quality through adherence to Good Manufacturing Practices (GMP), Food Safety Preventive Controls, product specifications and quality procedures * Participates in the maintenance and development of plant quality programs in support of HACCP * Provides training and education of quality-based programs to manufacturing partners * Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same * Understand and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) * Supports food safety, legality, and quality programs * Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures. Monitors and documents quality measures using analytical tools * Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values * Maintains regular and consistent attendance and punctuality MINIMUM QUALIFICATIONS: * High School/GED or one to two years' experience in related field or combination of both education and experience * Operation of manual and automated analytical equipment (1 year) * Regulated food manufacturing environment with familiarity of Good Manufacturing Practices (GMP) standards (1 year) * Scientific method and report writing (1 year) * Gathering, recording, and reporting on operational and quality metrics, through manual or automated systems (1 year) ADDITIONAL REQUIRED QUALIFICATIONS: * Analytical skills * Attention to detail * Ability to communicate clearly and concisely, both orally and in writing * Ability to work independently and make decisions with minimal supervision * Mechanical/Technical Aptitude to troubleshoot minor equipment failures and make minor adjustments * Ability to perform basic math functions * Basic skills in Microsoft Windows and internet applications * Ability to work with a diverse team environment * Ability to work in accordance with safety, quality and sanitation standards, policies and procedures * Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: * Education (ideal education level or degree): * 4 year degree or Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI). Experience with the GFSI certification schemes (i.e. BRC and/or or SQF). PHYSICAL DEMANDS & ENVIRONMENTAL HAZARDS: * O = Occasional (up to 25% of time) * F = Frequent (26%-74% of time) * C = Constant (75% or more of time) Requirement WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. * Medical, Dental & Vision * Group Life and AD&D * Voluntary Life and AD&D * Group Short & Long-Term Disability * 401(k) * Paid Time Off * Flexible Spending Accounts * Employee Assistance Program * Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI-RV1 #EvolutionFresh 2nd Shift 3:00pm to 11:30pm

Absopure is an equal opportunity employer. The QA Technician is responsible for production support and ensuring that we are sending out a quality product. This position is also responsible for ensuring water flow and sanitation of all treatment units including ROs, media beds, tanks, filters, etc. Additionally, the position will have direct interface with production and maintenance personnel to ensure product output while maintaining high quality standards through in house testing of raw material and finished goods. Follow company work and safety policies and instructions Comprehend and perform routine QA line checks (pH, 03, conductivity, iron, chlorine, chloride, TDS, taste and odor. Production checks, codes, labels, fill volumes, torque test, caps, leakers, etc. Sampling for microbiology, shelf life, iron, manganese and turbidity. Water Distribution and movements, including tankers. Sanitizing and start up procedures. Bottle washer procedures and testing. Responsible for quality of labels, caps, bottles, boxes, code dates, and general condition of product prior to shipping out to customers Report food safety and quality problems to personnel with authority to initiate action Incoming packaging testing Filter changes, backwashes and sanitizing all necessary equipment Maintain HACCP and SQF quality records Other duties as assigned. Requires a Bachelor's degree in Chemistry, Biology or related science or 2-4 years of related experience handling food and/or beverage products. We offer an excellent benefits package that includes Health Insurance, Dental Insurance, Vision Insurance, Company Provided Life and Disability Insurances, 401(k) with company matching and more!

#Indeed As a company, we promote a culture of honesty and integrity, and value the trust it allows us to build with customers and employees alike. Our focus on our people is what sets us apart and keeps our customers coming back to work with us! If you are seeking to be a part of a family, this is the place for you! Maersk Warehousing and Distribution USA LLC handles end-to-end warehousing and distribution logistics needs utilizing our strategic network of storage facilities. Our facilities are capable of receiving, storing, processing and dispatching cargo, so we can build flexibility and resilience into the supply chain process. Our integrated solutions allow us to be prepared for supply chain risks, so we can plan distribution to better achieve lead time and goals despite unexpected conditions. Our extensive experience, connections, and deep expertise across different sectors, industries, and transportation modes, means we can be counted on for process excellence that will save time and money. Purpose/Summary: To ensure accurate receiving and shipping of customers' freight, maintain inventory integrity, and investigate and reconcile all inventory and shipping discrepancies. Create reports as required. Key Responsibilities: Audit all outbound shipments for quantity, SKU, customer requirements and pallet count. Identifying and reconciling inventory discrepancies in a timely manner Maintaining inventory reports and logs as needed, including: Comparison Report Metric Reports Error Logs Assisting customer with daily checks as requested Checking freight for accurate paperwork, placards and/or label placement Reconciliation of overages, shortages and damages Apprising Dock Lead and Customer Service Manager of any non-compliant freight Verifying all freight pulls, transfers, movement of freight and orders Assist in planning inbound and outbound loads Process driver paperwork and load documents Take photos of outbound loads Assist CSR and other staff as needed Assist with small parcel assembly Cross train in other areas of the team, specifically Customer Service Support facility commitment to quality, which includes customer specific Quality program(s), training requirements and work instructions Special Projects as assigned Performs job related duties as specified by management Qualifications: Self-starter attitude; high energy Strong written and verbal communication skills Analytical and organized, ability to focus on details and compare data Ability to work independently Must possess excellent time management skills to manage high volume in a fast-paced environment Ability to perform well with time-sensitive tasks Ability to work and communicate with both warehouse personnel and office staff appropriately Industry experience preferred; not required Proficient in Microsoft applications (i.e. Outlook, Word and Excel) Company Benefits: Medical Dental Vision 401k + Company Match Employee Assistance Program Paid Time Off Flexible Work Schedules (when possible) And more! Pay Range: $20-$21.50 an hour *The above stated pay range is the anticipated starting salary range for the position. The Company may adjust this range in light of prevailing market conditions and other factors such as location. The Company will work directly with the selected candidate(s) on the final starting salary in accordance with all applicable laws. #INDEED Maersk is committed to a diverse and inclusive workplace, and we embrace different styles of thinking. Maersk is an equal opportunities employer and welcomes applicants without regard to race, colour, gender, sex, age, religion, creed, national origin, ancestry, citizenship, marital status, sexual orientation, physical or mental disability, medical condition, pregnancy or parental leave, veteran status, gender identity, genetic information, or any other characteristic protected by applicable law. We will consider qualified applicants with criminal histories in a manner consistent with all legal requirements. We are happy to support your need for any adjustments during the application and hiring process. If you need special assistance or an accommodation to use our website, apply for a position, or to perform a job, please contact us by emailing accommodationrequests@maersk.com.

The QA Warehouse Associate is responsible for providing operational support to the Technical Inspector/Tire Warranty Technician. This position plays a key role in the handling, processing, and documentation of warranty tires and scrap materials, ensuring that all quality assurance and warehouse procedures are followed. Key Responsibilities: * Load and unload warranty tires using a forklift and/or by hand * Process scrap tires, including lumping and cutting as required * Move scrap tires to designated storage or disposal areas * Clean and maintain the QA C.A.P. Center to ensure a safe and organized work environment * Receive and stage inbound warranty adjustments for inspection and processing * Verify Bill of Lading (BOL) counts and update logs accurately * Assist in other quality assurance and warehouse activities as directed Qualifications: * Experience operating a forklift (certification preferred) * Ability to perform physically demanding tasks, including lifting and moving heavy items * Strong attention to detail and accuracy in recordkeeping * Commitment to safety protocols and procedures * Ability to work collaboratively in a team environment

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). Ensure all products conform to the customer specifications as outlined in SAP system. Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. Perform analytical tests required to qualify ingredient batches for production. Perform production line checks at specified intervals. Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. Maintain laboratory cleanliness at all times. Report all out of specification results to designated leadership. Complete special projects and other reasonable duties as assigned by leadership. Required Skills: Working knowledge of Excel, Word, and SAP preferred. Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. Organized and detail oriented, adaptable to change. High level of precision and accuracy in inspection and testing processes. Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations Understanding of Food Safety Requirements. Able to read and understand metric system. Food or beverage laboratory experience preferred. Competencies: Technical: Skilled in maintaining accurate and detailed records of inspections and tests Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. Adaptability: Flexibility to adapt to changing production environments and requirements. Communication: Clear and concise communication with production staff and management Education and Experience: Highschool diploma or equivalent. 1 - 3 years of experience in Quality within a manufacturing environment preferred. In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 40 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco Beverages US Inc. offers the following competitive pay and comprehensive benefits: Pay Range: $20.51/hr to $28.19/hr, plus eligibility for performance-based bonuses based on company objectives. Shift: 2nd Status: Non-Exempt Medical/Dental/Vision Insurance Health Savings Accounts and Flexible Spending Accounts Life and AD&D Insurance, critical illness, hospital indemnity, and accident insurance Short-term disability and long-term disability Pet Insurance Legal Benefits 401(k) Savings Plan with Company Match 12 Paid Holidays 5 Vacation Days and Paid (Sick) Time Off Days in accordance with applicable law Well-being Benefit Discount and Total Reward Programs The applicant who is hired will receive wages within the range that will be based on several factors, including, as applicable, criteria such as years and type of experience, relevant education, training, qualifications, certifications/licensing, skills, geographic location, performance, market considerations, seniority system, merit system, systems that measure earnings by quantity or quality of production, and business or organizational needs (such as whether the position requires regular and necessary travel). How to apply: www.refrescocareers.com. Application deadline: 2/15/2026 (the application deadline is a good-faith estimate and may be extended in certain circumstances) Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc.  Refresco Beverages, US Inc., will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity.  Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees.  Refresco Beverages US Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: * Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). * Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). * Ensure all products conform to the customer specifications as outlined in SAP system. * Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. * Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. * Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. * Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. * Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. * Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. * Perform analytical tests required to qualify ingredient batches for production. * Perform production line checks at specified intervals. * Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. * Maintain laboratory cleanliness at all times. * Report all out of specification results to designated leadership. * Complete special projects and other reasonable duties as assigned by leadership. Required Skills: * Working knowledge of Excel, Word, and SAP preferred. * Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. * Organized and detail oriented, adaptable to change. * High level of precision and accuracy in inspection and testing processes. * Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations * Understanding of Food Safety Requirements. * Able to read and understand metric system. * Food or beverage laboratory experience preferred. Competencies: * Technical: Skilled in maintaining accurate and detailed records of inspections and tests * Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. * Adaptability: Flexibility to adapt to changing production environments and requirements. * Communication: Clear and concise communication with production staff and management Education and Experience: * Highschool diploma or equivalent. * 1 - 3 years of experience in Quality within a manufacturing environment preferred. * In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: * Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. * Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 40 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X * Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. * Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: * This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco Beverages US Inc. offers the following competitive pay and comprehensive benefits: Pay Range: $20.51/hr to $28.19/hr, plus eligibility for performance-based bonuses based on company objectives. Shift: 2nd Status: Non-Exempt * Medical/Dental/Vision Insurance * Health Savings Accounts and Flexible Spending Accounts * Life and AD&D Insurance, critical illness, hospital indemnity, and accident insurance * Short-term disability and long-term disability * Pet Insurance * Legal Benefits * 401(k) Savings Plan with Company Match * 12 Paid Holidays * 5 Vacation Days and Paid (Sick) Time Off Days in accordance with applicable law * Well-being Benefit * Discount and Total Reward Programs The applicant who is hired will receive wages within the range that will be based on several factors, including, as applicable, criteria such as years and type of experience, relevant education, training, qualifications, certifications/licensing, skills, geographic location, performance, market considerations, seniority system, merit system, systems that measure earnings by quantity or quality of production, and business or organizational needs (such as whether the position requires regular and necessary travel). How to apply: ************************ Application deadline: 2/15/2026 (the application deadline is a good-faith estimate and may be extended in certain circumstances) Join Refresco TODAY and enjoy a rewarding CAREER! Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc. Refresco Beverages, US Inc., will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees. Refresco Beverages US Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law. Criteria Behaviors Enthusiastic: Shows intense and eager enjoyment and interest Team Player: Works well as a member of a group Thought Provoking: Capable of making others think deeply on a subject Innovative: Consistently introduces new ideas and demonstrates original thinking Dedicated: Devoted to a task or purpose with loyalty or integrity Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Motivations Growth Opportunities: Inspired to perform well by the chance to take on more responsibility Goal Completion: Inspired to perform well by the completion of tasks Entrepreneurial Spirit: Inspired to perform well by an ability to drive new ventures within the business Flexibility: Inspired to perform well when granted the ability to set your own schedule and goals Work-Life Balance: Inspired to perform well by having ample time to pursue work and interests outside of work Self-Starter: Inspired to perform without outside help Ability to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organization

The Quality Control Inspector (QA/QC) is responsible for implementing quality control and safety plans to ensure compliance with contract specifications, applicable regulations, and company standards. This position inspects all phases of goods, services, and operations to verify conformity with established quality health, and safety requirements. The Quality Control Inspector (QA/QC) performs ongoing inspections to ensure all work meets contractual provisions, confirms that services listed on the performance requirement summary are completed in satisfactory manner, and determines areas to be inspected- both scheduled and unscheduled- as well as the frequency of inspections. This position requires communicating deficiencies to appropriate personnel, maintaining Quality Control files, and documenting the results of inspections. Performs all other position -related duties and assigned or requested. A valid Class A Commercial Driver's License (CDL-A) is required for this position to meet the scope of contract operations. Minimum Requirements High School graduate or equivalent. Must be able to speak, read, write, and understand English. Able to operate and inspect machines or equipment to diagnose defects and submit a request for replacement parts. Dismantles and reassembles equipment, using hoists and hand tools. Examine parts for damage or excessive wear, using micrometers and gauges. Identify defective engines and subassemblies, such as transmissions, and tests overhauled equipment to ensure operating efficiency. Performs scheduled and unscheduled maintenance, repairs, and adjustments of all heavy machinery to ensure the equipment remains fully mission capable for mission support. Performs a variety of collateral duties such as handling, containment, clean-up and disposal of hazardous waste, etc. Operates all heavy equipment and forklifts up to and including 50,000 pounds lift capacity, and a variety of other equipment to trouble shoot faults and validate repairs. Understands and uses safety items and personal protective equipment (PPE) that is mandatory and actively supports the EHS safety program. Required to walk, stand, sit, and move about the property for long periods of time. Required to perform physical activities that require considerable use of the arms and legs and moving the entire body, such as climbing, lifting, balancing, stooping to handle materials. Work in a noise level can range from minimal to intense. Able to lift and/or move up to 50 pounds. Possess a Valid California Commercial Drivers' License (CDL). Must be a US Citizen or able to work in the US. PD Systems is an equal opportunity employer and prohibits discrimination and harassment of any kind. Employment decisions at PD Systems are based on business needs, job requirements, and individual qualifications, without regard to race, religion, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, protected veteran status, or any other basis protected by applicable federal, state or local law.

ESSENTIAL FUNCTIONS OF THE JOB: Inspect products using inspection gauges at various inspection points throughout product lifecycle. Generate spreadsheets for data collection. Reconcile final inspection documentation for shipments. Interact with source inspector as needed. Test incoming raw materials. Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. Reject all products and materials that fail to meet quality expectations. Read blueprints, plans, and specifications to understand the requirements of products and services. Measure product dimensions, examine functionality and compare the final product to the specifications. Recommend improvements to the production process to ensure quality control. Document inspection outcomes by completing detailed reports and performance records. Teach the production team about quality control concerns to improve product excellence. Supervise the production process. Resolve quality-related issues in a timely manner. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 0-3 years performing inspection of assemblies (e.g. routine process inspections) KNOWLEDGE/SKILLS/ABILITIES: Excellent knowledge of MS Office. Good math and technical skills. Strong understanding of quality control standards and testing techniques. Strong written and oral communications skills Practical experience in precision inspection equipment and calibration Knowledge in aerospace materials This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be a U.S. Person which is defined as a U.S. citizen, a lawful permanent resident [“green card” holders], U.S. National, Refugee, or Asylee. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Salary Range: $23-25 hourly. Relocation assistance not available and we are only considering local candidates. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

Job Description The Quality Control Technician will be responsible for in-plant process testing and compliance to standards using client's quality and food safety policy. Perform tests of the production operations and equipment to ensure our products conform to specifications Discuss inspection results with those responsible for products and recommend necessary corrective actions Monitor the quality of the product manufactured and inspect process controls points Reject or retain substandard products that fall outside of defined tolerances Responsible for timely completion and accuracy of paperwork May use computer software and electronic equipment to enter data Establish, maintain and promote good communications with all departments Performs other tasks and duties as needed Reject or retain substandard products that fall outside of defined tolerances Responsible for timely completion and accuracy of paperwork Skills and Requirements: Experience working in a food manufacturing environment is preferred.

工作内容： W.H.P.M., Inc., established in 1993, is a privately held corporation headquartered at Irwindale, California, only 15 minutes away from downtown Los Angeles. The Company is a pioneer in the research and development of one-step rapid membrane tests. It has been designated a registered GMP facility for in vitro diagnostic medical devices by the FDA. Responsibilities *Ensure all raw materials and finished products are compliant with documented specifications and procedures though testing. *Works closely with Quality Assurance and Production personnel to ensure a quality product is being assembled as per documented procedures. *Accountable for the inspection, testing, and release of all raw materials, in-process materials, and testing of all finished products per documented specifications and procedures. *Accountable for release testing for all shipments. *Work with Management to improve product quality and assembly execution. *File daily paperwork and assist in maintaining all quality records. *Assist with recording and testing of customer complaints. *Promote and maintain a safe work environment while practicing safe work habits and procedures. *Other duties as assigned. Mandarin Speaking Required 工作条件： 可以合法报税,工作氛围融洽,需具有责任心,细心,有团队合作精神 工作时间： 周一至周五8小时,法定节假日休息 职位为全职工

Job Description Ready to ensure precision where it matters most? Join an established aerospace manufacturer where your inspection expertise directly impacts flight safety and mission success. This isn't just quality control-it's aerospace excellence with a 4x10 schedule. Company Description Our client is a well-established 62+ year aerospace fittings manufacturer in Covina, CA, known for their close-knit culture, employee longevity, and aggressive 5-7 year growth plan backed by significant capital investment. They specialize in high-precision hydraulic and pneumatic system components for critical aerospace applications. Role Impact As a Quality Inspector, you'll be the final checkpoint ensuring every aerospace fitting meets exacting dimensional specifications before it reaches the aircraft. Your measurements and inspections protect both product integrity and aviation safety while supporting the company's production expansion goals. Key Responsibilities Perform dimensional inspections using precision hand tools including micrometers, calipers, gages, optical comparators, height gages, and drop indicators to verify aerospace component specifications Read and interpret complex blueprints with aerospace standards (AS, MS, NAS, NSA) and work instructions to ensure dimensional accuracy Monitor production operations in real-time to identify non-conformances and recommend immediate corrective adjustments Conduct First Article Inspections independently to validate new setups and production runs meet engineering requirements Communicate inspection findings clearly to machinists, supervisors, and production personnel to maintain quality flow Support calibration protocols for inspection equipment to ensure measurement accuracy and compliance with aerospace quality standards Document inspection results and maintain quality records in accordance with ISO 9001 and AS9100 requirements Reject non-conforming products and materials that fail to meet specifications, protecting downstream operations Qualifications Required 2+ years of quality inspection experience in manufacturing environment Proficiency with precision measurement tools: micrometers, calipers, gages, optical comparators, height gages Blueprint reading skills with ability to interpret GD&T (Geometric Dimensioning and Tolerancing) Strong mathematical skills for dimensional analysis and tolerance verification Familiarity with Microsoft Windows operating systems for quality documentation Preferred Aerospace or precision machining inspection background AS9100 or ISO 9001 quality system knowledge Experience with First Article Inspection protocols ITAR compliance awareness Optical comparator proficiency for complex geometry verification Benefits & Value Proposition Compensation: Market competitive based on experience Work-Life Balance: 4-day work week (10-hour shifts) Three-day weekends standard Overtime opportunities available for additional earnings Comprehensive Benefits: 401(k) with company match Medical, dental, and vision insurance Paid time off Life insurance Why This Opportunity Stands Out: Family-oriented culture with employees who have long tenures Part of aggressive growth plan with human capital as top priority Work with advanced aerospace components for critical applications Skills-based evaluation culture that values technical expertise Stable, established company with 62+ year track record Culture Join a close-knit quality team where craftsmanship is valued and your technical expertise makes an immediate impact. The Operations Manager genuinely cares about team success and creates an environment where precision and attention to detail are celebrated. Long employee tenures reflect the supportive, family-oriented atmosphere. Call-to-Action Ready to be the guardian of aerospace quality? Apply and Pave Talent will contact qualified candidates within 48 hours. Confidential search-your application privacy is fully protected. Apply now to join a growing aerospace leader!

Job Description Concorde Battery Corporation is a manufacturer of specialty lead-acid batteries and is the leading producer of lead-acid batteries for aircraft. Our other products include batteries for Marine, RV, and Photovoltaic Systems. We've been in business for over 45 years and continue to grow to meet the needs of our customers. People are the most important component to the success of a company and Concorde is fortunate to have a staff with over 150 years of battery manufacturing, designing and aircraft system experience. If you think you might be a good match, we encourage you to apply. Concorde Battery Corporation is currently looking for a driven candidate to start a career working in the Quality Department as a Quality Control Inspector. The successful candidate will be responsible for in-process and final inspections. The Quality Control Inspector is part of the QA team and is also responsible for general quality related tasks. The Quality Control Inspector reports directly to the Quality Production Supervisor. Position Responsibilities: Perform inspection of materials, processes and final product, per business need. Generates inspection reports according to AS9100 requirements. Enter inspection data into systems. Utilizes inspection tools including calipers, gauges and testing equipment (CMM). Reads and interprets drawings, procedures and work instructions. Identifies areas for improvement in inspection processes and coordinates implementation. Comply with all safety requirements; participate in safety training/practices. Qualifications: 1+ years QA inspection experience using standard inspection tools including calipers, gages, etc. in a manufacturing environment. Understanding of QA requirements, processes, practices and systems. Demonstrated ability to work in team-based environments. Ability to read engineering drawings to determine and measure features and tolerances. Strong written and verbal communication skills in English. Software experience; Excel, Word, Power Point, etc. Bilingual - English/Spanish Perks and Benefits: Desired first shift schedule Premium Health Insurance - $0 employee premium & $0 deductible Company provided life insurance for all employees with $0 employee contribution Dental 10 paid holidays 5 paid sick days Accrued vacation 401(k) Profit Sharing Frequent overtime availability based on customer demand This position description reflects the general level and nature of the job, and is not to be considered as all inclusive. Concorde Battery Corporation offers a competitive salary and outstanding benefits. For more information about Concorde Battery Corporation please visit our website at *********************** CONCORDE BATTERY CORPORATION IS AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER. Job Posted by ApplicantPro

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Engineering Technician III (Aseptic Filler/ Capper) The Engineering Technician III (Aseptic Filler/ Capper) will be working on the production floor with plant technicians at Niagara facilities around the country. Tasks include performing diagnostic visits on production lines in preparation for an annual rebuild/overhaul, taking part, on a team, in those line rebuilds/overhauls, and providing support to those plants that are in need of help. Essential Functions Providing Plant Support for Niagara Facilities Provide aid and expertise to plant maintenance teams and internal Engineering Technicians Aid in any needed repairs on production machinery, as necessary Provide information on needs for long term success of facilities, including but not limited to the Focus Line Process Diagnostic Visits Identify problems and wear & tear on machine centers for every line. Perform root cause analysis for corrective actions Develop suggestions for parts and labor needed during annual rebuilds/overhauls Annual Rebuilds/Overhauls Work on teams of 4, along with plant maintenance teams Prepare machine centers to repair/rebuild problems found during Diagnostic Visits Training Attend machine center specific master class training as a baseline Assist with evaluation of Engineering Technicians skills on machine centers via a written assessment card Assist with the training of Engineering Technicians thru an OJT style format Suggest machine center specific training modules for the Engineering Technicians that are needed above and beyond the OJT system Assist with the further development and implementation of the OJT style training for our group Travel Requirements: Approximately 75% of the year (10x4 Schedule) Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 4 Years - Experience in Field or similar manufacturing environment 4 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 6 Years- Experience in Field or similar manufacturing environment 6 Years - Experience working in Position 4 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies Some Proficiency in, but not limited to: Microsoft Office Applications - Word, Excel, Access, PowerPoint, Outlook, Visio, etc. Able to work with others Often placed in teams of 4, or occasionally more. Often working in conjunction with plant maintenance staff Strong analytical and problem solving skills Self-Motivated with a proven record of taking the initiative Able to work with minimal supervision Must exhibit leadership capability when working both alone and with teams in order to complete projects safely and in a timely fashion. Detail-oriented with excellent verbal and written communication skills Able to execute tasks in a very dynamic and ever-changing environment Exercise sound judgment and ability to work effectively with a diverse workforce Required to be considered an SME (Subject Matter Expert) in a given machine center that is pertinent to Niagara Bottlings business needs. Education Minimum Required: Associate's Degree in Engineering or other related field Preferred: Bachelor's Degree in Engineering or other related field Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$28.90 - $41.91 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

THE ROLE: QA Supervisor * Travel Requirement: No * Shift: 3rd Shift 11:00PM to 7:30AM * FLSA Status: Non-Exempt * Employment Category: Full-Time Regular * Pay Range: $25.50 - $30.50 Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This job contributes to Evolution Fresh success by ensuring product quality information is provided to all necessary parties, samples are maintained, and raw materials have complete traceability to the finished product. Models and acts in accordance with Evolution Fresh guiding principles. JOB DUTIES: * Evaluates and documents quality of finished goods and raw materials * Reports quality conditions as needed * Evaluates condition of the manufacturing facility and warehouse space to ensure compliance to regulatory and HACCP requirements * Audits programs in support of quality objectives * Maintains a clean and organized working environment * Follows safety regulations. Participates in process improvement activities. Meets performance schedules * Maintains product quality through adherence to Good Manufacturing Practices (GMP), Food Safety Preventive Controls, product specifications and quality procedures * Participates in the maintenance and development of plant quality programs in support of HACCP * Provides training and education of quality-based programs to manufacturing partners * Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same * Understand and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) * Supports food safety, legality, and quality programs * Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures. Monitors and documents quality measures using analytical tools * Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values * Maintains regular and consistent attendance and punctuality MINIMUM QUALIFICATIONS: * High School/GED or one to two years' experience in related field or combination of both education and experience * Operation of manual and automated analytical equipment (1 year) * Regulated food manufacturing environment with familiarity of Good Manufacturing Practices (GMP) standards (1 year) * Scientific method and report writing (1 year) * Gathering, recording, and reporting on operational and quality metrics, through manual or automated systems (1 year) ADDITIONAL REQUIRED QUALIFICATIONS: * Analytical skills * Attention to detail * Ability to communicate clearly and concisely, both orally and in writing * Ability to work independently and make decisions with minimal supervision * Mechanical/Technical Aptitude to troubleshoot minor equipment failures and make minor adjustments * Ability to perform basic math functions * Basic skills in Microsoft Windows and internet applications * Ability to work with a diverse team environment * Ability to work in accordance with safety, quality and sanitation standards, policies and procedures * Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: * Education (ideal education level or degree): * 4 year degree or Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI). Experience with the GFSI certification schemes (i.e. BRC and/or or SQF). PHYSICAL DEMANDS & ENVIRONMENTAL HAZARDS: * O = Occasional (up to 25% of time) * F = Frequent (26%-74% of time) * C = Constant (75% or more of time) Requirement WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. * Medical, Dental & Vision * Group Life and AD&D * Voluntary Life and AD&D * Group Short & Long-Term Disability * 401(k) * Paid Time Off * Flexible Spending Accounts * Employee Assistance Program * Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI-CG1 #EvolutionFresh 3rd Shift 11:00PM to 7:30AM

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Summary Description: Reporting to the Quality Supervisor, the Quality Technician is responsible for overseeing day-to-day quality operations for the production lines including the implementation and monitoring of food safety and food quality, sanitation and batching systems to facilitate compliance with company objectives and regulatory requirements. Essential Job Functions: * Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). * Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). * Ensure all products conform to the customer specifications as outlined in SAP system. * Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. * Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. * Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. * Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. * Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. * Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. * Perform analytical tests required to qualify ingredient batches for production. * Perform production line checks at specified intervals. * Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. * Maintain laboratory cleanliness at all times. * Report all out of specification results to designated leadership. * Complete special projects and other reasonable duties as assigned by leadership. Required Skills: * Working knowledge of Excel, Word, and SAP preferred. * Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. * Organized and detail oriented, adaptable to change. * High level of precision and accuracy in inspection and testing processes. * Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations * Understanding of Food Safety Requirements. * Able to read and understand metric system. * Food or beverage laboratory experience preferred. Competencies: * Technical: Skilled in maintaining accurate and detailed records of inspections and tests * Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. * Adaptability: Flexibility to adapt to changing production environments and requirements. * Communication: Clear and concise communication with production staff and management Education and Experience: * Highschool diploma or equivalent. * 1 - 3 years of experience in Quality within a manufacturing environment preferred. * In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: * Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. * Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: * 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X * Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. * Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: * This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: Pay Rate: $22.61 an hour Status: Non-Exempt * Medical/Dental/Vision Insurance * Health Savings Accounts and Flexible Spending Accounts * Life and AD&D Insurance, critical illness, hospital indemnity, and accident insurance * Short-term disability and long-term disability * Pet Insurance * Legal Benefits * 401(k) Savings Plan with Company Match * 11 Paid Holidays * 5 Vacation Days and Paid (Sick) Time Off Days in accordance with applicable law * Well-being Benefit * Discount and Total Reward Programs The applicant who is hired will receive wages within the range that will be based on several factors, including, as applicable, criteria such as years and type of experience, relevant education, training, qualifications, certifications/licensing, skills, geographic location, performance, market considerations, seniority system, merit system, type of shift worked, systems that measure earnings by quantity or quality of production, and business or organizational needs (such as whether the position requires regular and necessary travel). How to apply: *********************** Application deadline: October 17, 2025 (the application deadline is a good-faith estimate and may be extended in certain circumstances) Join Refresco TODAY and enjoy a rewarding CAREER! Refresco Beverages US Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law. Criteria Behaviors Team Player: Works well as a member of a group Loyal: Shows firm and constant support to a cause Leader: Inspires teammates to follow them Functional Expert: Considered a thought leader on a subject Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Dedicated: Devoted to a task or purpose with loyalty or integrity Motivations Self-Starter: Inspired to perform without outside help Goal Completion: Inspired to perform well by the completion of tasks Flexibility: Inspired to perform well when granted the ability to set your own schedule and goals Entrepreneurial Spirit: Inspired to perform well by an ability to drive new ventures within the business Ability to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organization

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Summary Description: Reporting to the Quality Supervisor, the Quality Technician is responsible for overseeing day-to-day quality operations for the production lines including the implementation and monitoring of food safety and food quality, sanitation and batching systems to facilitate compliance with company objectives and regulatory requirements. Essential Job Functions: Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). Ensure all products conform to the customer specifications as outlined in SAP system. Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. Perform analytical tests required to qualify ingredient batches for production. Perform production line checks at specified intervals. Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. Maintain laboratory cleanliness at all times. Report all out of specification results to designated leadership. Complete special projects and other reasonable duties as assigned by leadership. Required Skills: Working knowledge of Excel, Word, and SAP preferred. Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. Organized and detail oriented, adaptable to change. High level of precision and accuracy in inspection and testing processes. Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations Understanding of Food Safety Requirements. Able to read and understand metric system. Food or beverage laboratory experience preferred. Competencies: Technical: Skilled in maintaining accurate and detailed records of inspections and tests Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. Adaptability: Flexibility to adapt to changing production environments and requirements. Communication: Clear and concise communication with production staff and management Education and Experience: Highschool diploma or equivalent. 1 - 3 years of experience in Quality within a manufacturing environment preferred. In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: Pay Rate: $22.61 an hour Status: Non-Exempt •Medical/Dental/Vision Insurance •Health Savings Accounts and Flexible Spending Accounts •Life and AD&D Insurance, critical illness, hospital indemnity, and accident insurance •Short-term disability and long-term disability •Pet Insurance •Legal Benefits •401(k) Savings Plan with Company Match • 11 Paid Holidays • 5 Vacation Days and Paid (Sick) Time Off Days in accordance with applicable law •Well-being Benefit •Discount and Total Reward Programs The applicant who is hired will receive wages within the range that will be based on several factors, including, as applicable, criteria such as years and type of experience, relevant education, training, qualifications, certifications/licensing, skills, geographic location, performance, market considerations, seniority system, merit system, type of shift worked, systems that measure earnings by quantity or quality of production, and business or organizational needs (such as whether the position requires regular and necessary travel). How to apply: www.refrescocareers.com Application deadline: October 17, 2025 (the application deadline is a good-faith estimate and may be extended in certain circumstances) Join Refresco TODAY and enjoy a rewarding CAREER! Refresco Beverages US Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.