Quality control inspector jobs in Hyattsville, MD - 248 jobs

Zachary Piper Solutions is looking for a Quality Control Inspector to join a design services company for mission critical systems. This is a FULL TIME job and onsite in Jessup, MD. Essential Duties of the QC Inspector: * Contract document review for compliance: RFP, Specs, Drawings, Submittals, etc. * Review design documents for constructability and contract compliance. * Implement 3-Phase Quality Control approach: Preparatory meetings, Initial inspections, and follow-up inspections. * Participate in daily safety meetings to discuss Quality issues and concerns. * Attend all required project meetings to provide resolution to any Quality issues from Owner/QC. * Manage and assist in resolving all Quality or Commissioning punch-lists. Qualifications of the QC Inspector: * 4+ years of hands-on experience in construction, estimation, and/or quality control activities. * Current Journeyman License or ability to obtain within 6 months of hire. * Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standards. * Experience with receiving, production, shipping and quality processes. Compensation for the QC Inspector: * $75,000 - $85,000 (based on experience) * Monthly cell phone allowance * Comprehensive benefit package; Cigna Medical, Cigna Dental, Vision, 401k w/ ADP, PTO, paid holidays, Sick Leave as required by law, paid holidays This job opens for applications on 12/12/2025. Applications for this job will be accepted for at least 30 days from the posting date. #LI-LS3 #LI-ONSITE Keywords: 401k, 401k match, pto, paid time off, holiday, medical, dental, health, culture, ts/sci, top secret, government clearance, security clearance, ssbi, secret clearance, dod clearance, department of defense, army, navy, military, marines, air force, electrician, electronics technician, electronics tech, cctv, closed circuit tv, closed-circuit tv, closed circuit television, closed-circuit television, cat5, cat 5, cat6, cat 6, ids, acs, Hirsch, identiv, bosch, radionics, radionic, bvms, alphone, intercom, airphone, fft, divar, installation, field operation, field engineer, site survey, field tech, field technician, jha, aha, pfw, safety plan, pitco, cabling, pulling cables, equipment rack, information technology, i.t., infralink, lenel, software house, intrusion detection system, access control, maglock, vms, tested wire, communication technician, communications technician, installation, retrofit, communication equipment, communications equipment, pulling cable, cable pulling, site surveys, copper, fiber optic, fiberoptic, fiber cable, optic cable, copper cable, ancillary communications, communication system, communications system, structured cable plant, bicsi, rated copper, optic cable, horizontal cabling, horizontal copper, cable testing, testing cable, anaerobic, fusion splicing, splicing, riser cable, outside plant, osp, osp installation, prefab, prefab assembly, conduit, floor sleeves, bluebeam, blue beam, fluke versiv, cat6a, cat 6a, cat5a, cat 5a, project manager, general contractor, program manager, superintendent, construction, construction manager, primavera, p6, primaverap6, primavera p6, bluebeam, deputy leader, telecom, telecom manager, telecommunications manager, telecom project, telecommunications project, pkom, ms project, Microsoft project, isp copper, distributed antenna system, cctv, outside plant, inside plant, isp, osp, fiber optic, structured cabling, budget, telecom systems, telecom system, telecommunications system, telecommunication system, financial management, project team, manpower, material budget, autocad, project documentation, cash flow, construction management, critical path method, cpm, cpm scheduling, general contractor schedules, telecom scope, telecommunication scopes, low-voltage, low volt, low voltage, quality control, quality assurance, quality control inspector, quality control specialist, quality assurance inspector, quality assurance specialist, qc specialist, qc inspector, construction inspector, qa specialist, qa inspector, electrician, master electrician, journeyman, journeyman electrician, journeyman license, master license, electrician master, electrician journeyman, rfp, request for proposal, inspection, installation checklist, quality issues, quality issue, bim models, bim model, building information modeling, building information, building info, building modeling, nec, national electrical code, neta, international electrical testing association, nec codes, neta codes, electrical standards, electrical regulations, quality control inspection, qc inspections, qc inspection, quality assurance inspections, quality assurance inspection, qa inspection, qa inspections

Job Title: Quality Control Inspector Shift: 1st Shift Duration: Contract Temp-to-Hire Pay Rate: $23 - $33/hr (depending on experience) Benefits: Optional benefits available while on contract; full benefits upon permanent hire Position Overview: We are currently seeking a Quality Control Inspector for a rail car manufacturing facility located in College Park, MD. This is a hands-on role performing visual and dimensional inspections on rail car parts and assemblies to ensure compliance with strict quality standards.Responsibilities: • Inspect rail car parts and sub-assemblies for conformance to quality standards • Perform visual and dimensional inspections using tape measures, calipers, micrometers, scales, and other tools • Follow engineering drawings, written procedures, and verbal instructions • Record inspection results in reports with a high degree of accuracy and detail • Work with both English and Metric measurement systems • Interpret engineering drawings and perform inspections across all phases of assembly including: - Part Fabrication - Receiving - Metal Matching - Sub Assembly - Shell Assembly - Truck Assembly & Test - Interior and Cab - Exterior - Under-floor - SourceRequired Skills & Qualifications: • Minimum of 2 years of QC inspection experience, preferably in a manufacturing environment • Strong mechanical aptitude and attention to detail • Ability to independently perform final inspection on an entire rail car • Proficiency with inspection tools including tape measures, calipers, and micrometers • Comfortable working in an active shop environment • Physically capable of lifting up to 40 lbs and climbing stairs and ladders Work Environment: This role is based in a rail car production facility with both indoor and outdoor work areas. Strict safety protocols and quality standards are enforced.About Us: Top Prospect Group, established in 2010, is a leading technical staffing firm connecting top talent with premier clients. In 2023, TPG joined HW Staffing Solutions, expanding its reach and services across the professional and technology sectors.Interested candidates, please submit: • A clean copy of your resume • Salary expectations • Availability and at least one professional reference#INDTPGSHELTON

The Quality Control Inspector ensures that all Firm-Fixed-Price (FFP) work under IDIQ contracts comply with the specified quality standards, contract requirements, and applicable codes. The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. Essential Duties and Responsibilities Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes. Develop and maintain project-specific Quality Control Plans (QCPs) tailored to each task order. Conduct and document three-phase inspections (Preparatory, Initial, Follow-Up) for all definable features of work. Coordinate with subcontractors, government representatives, and project managers to resolve quality issues. Prepare daily and weekly QC reports with photographic documentation and accurate records of observations. Ensure compliance with safety standards and proactively report any unsafe conditions. Participate in pre-task planning, submittal reviews, and material/equipment verifications. Verify and document corrective actions and non-conformance resolutions. Support audits and final inspections for project closeouts. Knowledge, Experience and Skill Requirements High school diploma or equivalent; technical certification or associate degree preferred. Minimum of 3 years of construction quality control experience on federal, IDIQ, or FFP-type contracts. Familiarity with USACE/NAVFAC 3-phase QC system is highly preferred. Strong working knowledge of construction methods, materials, codes, and QA/QC standards. Excellent documentation, organizational, and communication skills. Proficient with basic computer applications (Word, Excel, QC software). Must be able to pass security clearance and background check as required by federal contracts. Physical, Environmental and Sensory Requirements Work may be performed at active construction sites in varying weather conditions. Frequent travel may be required to support multiple task orders across a geographic region. Must be able to lift to 50 lbs., climb ladders, and navigate uneven terrain. Limited exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc. but generally not to the point of being disagreeable. Disclaimer We maintain a drug-free workplace and perform pre-employment substance abuse testing. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $ $54,400 - $81,600. This position may also be eligible for a wide range of competitive benefits that can include but not limited to medical, well-being, financial planning and short-term incentives benefits.  Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Mindlance is a national recruiting company which partners with many of the leading employers across the country. Feel free to check us out at ************************* Job Description Job Title: QC Inspector Location: Baltimore, MD Duration: 2+ Years Responsibilities: Inspector is in a high visibility position and therefore must always present themselves in a professional manner, with honesty and integrity. Must possess good interpersonal skills and willingness to learn. Observe, monitor and document proper completion of the following tasks in accordance with BGE specifications: Site survey Gas meter relocation To exterior Elevated Bollard installations Bucket Core drilled Bolt Down Elevate to Meter Engineering & Standards unique protection situations Coordinate with County/Municipal building inspectors for permits and final inspections Resolve customer questions and elevate to Field Supervisor as necessary unresolved issues Perform and document field safety audits. Proficient in using utility maps and locating equipment in the field. Must have 5+ years of QC inspection experience in a utility setting Gas OQ certified and/or Master Plumber/Gas Fitter are preferred Additional Information Thanks & Regards' ___________________________________________________________________________ Vikram Bhalla | Team Recruitment | Mindlance, Inc. | W: ************ All your information will be kept confidential according to EEO guidelines.

Replies within 24 hours Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Donation matching Health insurance Quality Inspector is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits • Competitive salary and benefits package • Opportunity to work with a team of talented professionals • Challenging and rewarding work environment • Generous Paid Time Off • Several health insurance plan options with a generous employer contribution to the premium • Long term disability fully paid for by the company • Enhanced short term disability fully paid for by the company • Life insurance fully paid for by the company • Employee Assistance program • Dental and vision insurance • 401k plan with company match • HRA and HSA options for pre-tax savings with an employer funded HRA benefit • Pet insurance enrollment option SUMMARY: Inspects product at various stages of the production process and evaluates data to determine if the process can meet all requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs 1st piece, in-process, and final inspection on manufactured parts by using measuring equipment per the quality plan. Document all findings on inspection paperwork. Ensures all inspections/tests specified by the Quality Plans have been carried out using the most recent documents issued for the job, verifies the results are acceptable and the records of inspection are complete. • Audits internal manufacturing processes to assure compliance to standards and general work practices met the company's objectives. • If "nonconforming" product is found the Inspector stops production if appropriate while nonconformance is investigated. Contains suspect lots and tags suspect material using the Hold Tag. Together with the person reporting the nonconformance, completes a DMR and notifies the Quality and Operations Manager. • Follows up and re-inspects reworked material, obtains verification that disposition and salvage actions are adequate to resolve the nonconformance and closes out the DMR. • Performs and creates First Article Inspection Reports per AS9102 as required. • Work with other personnel in the quality department to verify calibration date and accuracy of gages issued to the production floor. Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. Education And Experience • 3-5 years of related experience and/or training required • Associate degree or equivalent from a two-year college or technical institute preferred • Must have knowledge of GD&T and Blueprints • Must be proficient with hand measuring equipment and various other inspection devices LANGUAGE SKILL: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. MATHEMATICAL SKILLS: High School level mathematics. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. COMPUTER SKILLS: Microsoft Word processing, Microsoft Excel Spreadsheets, Internet software, Navigate E-mail, Database software (preferred) DCC Coordinate Measuring Machine operation ~ with existing programs PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to fingers handle or feel objects, tools, or controls; and reach with hands and arms. The employee is occasionally required to talk or hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, color vision, and depth perception. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee may be exposed to non-hazardous fumes or airborne particles. The noise level in the environment is moderate. Benefits found in job post • Medical insurance • Vision insurance • 401(k) Compensation: $42,000.00 - $55,000.00 per year About Us AHU Technologies INC. is an IT consulting and permanent staffing firm that meets and exceeds the evolving IT service needs of leading corporations within the United States. We have been providing IT solutions to customers from different industry sectors, helping them control costs and release internal resources to focus on strategic issues. AHU Technologies INC. was co-founded by visionary young techno-commercial entrepreneurs who remain as our principal consultants. Maintaining working relationships with a cadre of other highly skilled independent consultants, we have a growing number of resources available for development projects. We are currently working on Various projects such as media entertainment, ERP Solutions, data warehousing, Web Applications, Telecommunications and medical to our clients all over the world.

The Quality Inspector is responsible for developing, implementing, and maintaining internal quality control systems that ensure product safety, compliance with quality principles, and adherence to company standards. This position inspects products, monitors internal processes, and recommends corrective actions to improve procedures, products, and production efficiency. Acting as a quality advocate, the Quality Inspector collaborates with internal teams and external customers to promote continuous improvement and ensure compliance with quality system standards. Essential Job Functions: · Ensure processes required to achieve quality standards are established, implemented, and maintained. · Inspect materials, products, and processes to confirm compliance with quality standards and specifications. · Administer quality assurance and control tests. · Monitor production activities to ensure alignment with customer requirements and company specifications. · Document product deficiencies, deviations, and errors, and prepare corrective action reports. · Collaborate with the Quality Manager and management team to drive continuous improvement initiatives. · Apply quality tools, benchmarks, and statistical methods to monitor and improve internal processes. · Investigate and resolve internal quality issues and customer complaints. · Ensure compliance, export standards, and company quality policies. · Serve as a liaison with external auditors, customers, and regulatory representatives on quality-related matters, as needed. · Promote awareness of quality principles throughout the organization. Schedule: The standard schedule is Monday through Friday, 8-10 hour shifts, with flexibility to work evenings and weekends as needed based on workload demands. Note: The duties and responsibilities described on this document are not necessarily a comprehensive list and additional tasks may be assigned to the employee from time to time; and the scope of the job may change as necessitated by business demands. Qualifications, Education, and Experience Required: · High school diploma or equivalent. · 1-3 years of experience inspecting products and materials for defects or deviations. · Strong attention to detail, with a focus on accuracy and compliance. · Proficiency in Microsoft Office and computer-based reporting tools. · Effective verbal and written communication skills. · Mathematical proficiency (addition, subtraction, multiplication, division, fractions, decimals). · Ability to work independently and in a team-oriented environment. Preferred: · Experience with ISO 9001 or AS9100. · Training or certification in Lean, Six Sigma, or ISO standards. · Experience in manufacturing or production environments. · Demonstrated skills in quality management systems and tools. · Must be a U.S citizen. Physical Requirements: · Prolonged periods sitting at a desk and working on a computer. · Must be able to lift up to 15 pounds at times. · Travel may be required from time to time. Working Conditions · Onsite position with office environment and high exposure to manufacturing areas. · Occasional travel may be required for vendor visits or company needs. · Flexibility to adapt to peak workloads and tight deadlines while maintaining accuracy and efficiency. Reasonable Accommodations To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodation may be made to help enable qualified individuals with disabilities to perform the essential functions. Company, Inc. is an Equal Opportunity Employer and does not discriminate. All employment decisions are based upon qualifications, merit, and business need.

Geotechnical Engineering Firm in Owings Mills Maryland seeking construction inspectors with materials testing experience for Public Works, Aviation, and Commercial assignments. Current NICET, WACEL, MARCTP, CWI, NACE, and/or ACI certifications would be necessary for soils, concrete, masonry, asphalt, rebar and other materials credentials. Special Inspections would require a combination of certifications that would allow candidate more senior opportunities. Projects throughout Maryland, DC and Virginia. Will provide additional training to motivated candidates. Opportunities for advancement based on attitude. Good writing and communication skills, dependable automobile and clean driving record a must. Pay commensurate with experience and certifications. EOE Salary Description Based on level of experience

Job Description Who Are We? At Parry Labs we believe the modern combat advantage relies on the speed and scale of open systems. We're redefining the edge of the increasingly ever-changing battlespace by delivering game changing capabilities to our warfighters through digital engineering, software, and hardware solutions that are essential to our core of being a Digital Systems Integrator. Born digital and agile, Parry Labs is building a winning team to be the premier provider for Next Generation Mission Systems Integration across air, land, sea, space and cyber. Are you ready to be an instrumental part of experts in the industry? Join us in the innovation of integration at Parry and apply to help develop the technologies of tomorrow while reaching new heights in your career today. About the Job The Quality Inspector ensures that all products and processes meet established quality standards, specifications, and compliance requirements. They are responsible for performing inspections at various stages of production, identifying defects or non-conformities, and documenting findings to drive continuous improvement. Collaborating closely with production teams, Quality Inspectors play a key role in maintaining product integrity, preventing errors, and ensuring customer satisfaction. This role requires a keen eye for detail, knowledge of quality standards, and the ability to follow procedures to identify and address issues efficiently. This is a six (6)-month contract position. Duties & Responsibilities Perform incoming / receiving inspections on all products to ensure that external, internal and dimensional aspects meet quality standards. Track work throughout the assembly lab, ensuring in process and final inspections are complete and proper documentation is completed. Adhere to calibrated tooling program by verifying all tools utilized in tasks are current and quarantining and submitting expired items for recalibration. Review processing and inspection data for completeness of operations, accuracy of data, traceability of product and materials, and disposition of non-conforming product. Assist with the implementation and maintenance of quality programs as required. Identify, quarantine and report any work that does not quality requirements. Assist with the tracking of non-conformance reports, and corrective / preventative actions. Collaborates with the quality and production departments to determine approaches and methods to improve overall quality of work. Interpret and check work instructions and assembly prints, both hard copy and digital for completeness and errors. Other duties as assigned. Required Qualifications 3+ years of QA Inspection experience, preferably on electro-mechanical assemblies. Able to read and understand mechanical and electrical drawings along with electronic circuit board assembly drawings and procedures. Good communication and interpersonal skills. Good or corrected eyesight for visual inspection. Organized work habits and attention to detail. Experience with working in an ESD environment. Experience with IPC-A-610, IPC-A-620 preferred. Experience with CostPoint ERP is a plus. Why Join Parry Labs? At Parry Labs, we foster a culture of curiosity and collaboration. Employees are given the autonomy to leverage their skills in creating state-of-the-art tech solutions that aid in the protection of the American Warfighter. We encourage new and bold ideas that push the status quo. It is this entrepreneurial spirit that drives us. Parry Labs will support you with workplace flexibility, a commitment to the health and well-being of you and your family and provide opportunities to work with a purpose. We are committed to supporting your success in both your professional and personal lives with benefits such as education assistance and unlimited paid time off, just to name a few. No One Has Time for Long Job Applications! We completely understand, that is why we have made the application process easy. We promise. This will be simple. Accessibility/Accommodation: If because of a medical condition or disability you need a reasonable accommodation for any part of the employment process, please send an e-mail to **************** or call ************** to let us know the nature of your request and contact information.

Job Title: Electrical Quality Control InspectorJob Description The Electrical Quality Control Inspector is responsible for planning, coordinating, and executing the commissioning process for data center facilities. The role ensures all systems operate as intended and meet design specifications. This position involves managing commissioning activities across electrical, mechanical, and control systems, ensuring compliance with industry standards, safety regulations, and client requirements. Responsibilities * Develop and manage commissioning plans, schedules, and procedures for data center projects. * Oversee functional testing of critical systems, including HVAC, electrical distribution, UPS, generators, fire suppression, and monitoring systems. * Ensure integration and interoperability of all systems prior to handover. * Collaborate with design engineers, construction teams, vendors, and clients to align commissioning activities with project timelines. * Conduct regular progress meetings and provide status updates to stakeholders. * Verify installation and performance against design specifications and operational requirements. * Ensure compliance with applicable codes, standards (ASHRAE, IEEE), and client-specific guidelines. * Prepare detailed commissioning reports, test results, and issue logs. * Maintain accurate records for turnover and future maintenance reference. * Identify potential risks during commissioning and implement mitigation strategies. * Ensure adherence to safety protocols and environmental regulations. Essential Skills * Data Center Experience * Commissioning Experience * Experience with Switchgears, UPS/ATS, Generators, and Chillers * Strong understanding of electrical and mechanical systems * Excellent project management and organizational skills * Ability to interpret technical drawings and specifications * Proficiency in commissioning software and tools Additional Skills & Qualifications * Bachelor's degree in Mechanical, Electrical, or Industrial Engineering (or related field) * 5+ years in commissioning, preferably in mission-critical facilities or data centers * Certified Commissioning Professional (CCP) * LEED Accredited Professional or equivalent project management certification Work Environment The position is based on a Data Center site in Manassas, VA. The role is a 6-month contract-to-hire opportunity, offering comprehensive benefits including Medical, Dental, Vision, and 401(k) options. Job Type & Location This is a Contract to Hire position based out of Ashburn, VA. Pay and Benefits The pay range for this position is $150000.00 - $175000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Ashburn,VA. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Company: VB Spine Looking for a career where your work truly matters? At VB Spine, you'll be part of a mission-focused team that supports surgeons during life-changing spinal procedures. We're looking for detail-oriented individuals ready to ensure the highest quality standards in our products. As a Quality Control Inspector, you'll help guarantee that every implant and instrument meets our strict specifications and regulatory requirements-contributing directly to patient safety and surgical success. Shift: This position is for the 12 PM to 9 PM shift. What You'll Do: Perform visual, dimensional, and functional inspections on components based on documented specifications (drawings, procedures, work instructions) Inspect labels and non-sterile (non-complex) implants Document results accurately in our computerized quality database Manage inventory transactions using JD Edwards Identify and quarantine nonconforming product per defined procedures Meet daily/weekly productivity and quality targets Collaborate across teams to ensure compliance with GMP and ISO 13485 standards Perform other quality-related tasks as needed What You Bring: High school diploma or GED required; college or technical coursework preferred 0-2 years of quality or manufacturing experience (medical device experience a plus) Ability to read complex mechanical blueprints Basic knowledge of measurement tools: calipers, micrometers, optical comparator, etc. Familiarity with GMP compliance for Class II Medical Devices and ISO 13485 preferred Strong computer skills (Excel, Access, Word); experience with databases and ERP systems Excellent verbal and written communication skills Ability to work independently and in a team environment Why VB Spine? We believe in growing talent from within. At VB Spine, you'll join a high-performing team, benefit from peer and executive mentorship, and play a key role in delivering high-quality spinal devices. You'll shape outcomes in a dynamic, high-impact environment-positioning yourself for long-term career growth in the medical device industry. Compensation: Pay for this role is competitive and based on experience, with additional factors like qualifications and performance taken into account. Benefits include: Comprehensive health, dental, and vision insurance 401(k) with company match Paid time off (PTO) and holidays Ongoing training and professional development opportunities Opportunity to grow within a fast-paced, dynamic company

Responsibilities This non-exempt position adheres to a Quality Control System, which complies with federal, state and local construction specifications for the asphalt plant products. Runs daily quality control tests to ensure compliance with specification of various projects and with federal, state and local regulations. Develops and adheres to all quality control procedures for the asphalt operations. Develops asphalt mix designs in accordance with project specifications. Coordinates quality control procedures on various projects with representatives of federal, state and local government agencies. Conducts various lab experiments on products using established scientific protocols. Coordinates with the asphalt plant control rooms regarding mix designs required by customers. Receives and analyzes product related technical data coming from external salespeople and technical representatives regarding production procedures. Preforms other job related duties as required or assigned. Opportunity for day work when alternating with other technicians during the paving season. Qualifications Bachelor's Degree or its equivalent in job experience is required in a scientific or engineering discipline. Minimum of 1-2 years experience; 3-5 years preferred. Knowledge of types of products and product components and the applicability of government regulation on product quality is necessary. Knowledge of lab scientific protocols is a must. Overview Our Company Does Work That Matters Allan Myers is the largest heavy civil construction and materials production contractor in the mid-Atlantic. We build infrastructure: the highways and bridges that connect cities and towns, the public water and wastewater systems that provide clean water to your home and keep our streams clean. We take pride in meeting the highest quality standards because it ensures our work will have a long-lasting positive impact on the community. When you get home safe each night, you know that what you did that day matters. At Allan Myers, you are part of a team dedicated to making things better, including your career. We pay well and provide generous benefits. We offer extensive training and promote from within. If you have the drive, we will help you build a career in the thriving construction industry and reach your full potential. Allan Myers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, disability, protected veteran status or other characteristics protected by law.

The Quality Control Technician inspects work performed by client employees, internal employees, or client subcontractors. Work is inspected for process and specification compliance against company/client guidelines. (This purpose is meant to be a guide. Duties may vary dependent upon client.) Essential Position Functions: * Inspect assigned work locations for compliance with client or company specifications and guidelines. * Inspections may include but are not limited to work safety, installation, and troubleshooting compliance. * Use appropriate testing equipment based upon client specifications. * Assist in preparing and developing inspection instructions and procedures. * Develop and create project specific checklists and standards. * Record and document inspection results and findings in applicable data sheets and forms. * Complete and submit inspection documentation to the appropriate supervisory personnel. * Ensure completion of inspections in a timely manner and track/report activities and metrics. * Drive safely to work sites and comply with all company/client safety standards. * Follow company/client standards by using related technical documentation. * Deliver feedback and supplemental training to employees/contractors as required. * Other duties assigned. Education and/or Experience: * High School diploma or GED preferred. * 2 or more years of relevant inspection experience from the telecommunications, construction, or utilities industries. Equivalent, applicable experience in lower level role may be substituted. * Must be proficient with a Windows and Android operating systems (proficiency with a tablet is preferred). * Must be proficient with Microsoft office applications (emphasis on Excel). * Must be able to read blueprints and other technical documentation. * Must be able to operate testing equipment relevant to the inspections such as an OTDR. * Experience with a major MSO or Telecom Operator is preferred. * Strong analytical and problem-solving ability required. * Ability to prioritize and complete assignments accurately and in a timely manner. * Able to effectively handle multiple priorities with a strong attention to detail in a fast-paced environment. * Strong interpersonal, organizational, oral and written communications skills. * Must be able to work alone, and with a team. * Must be able to pass a drug screen and criminal background check. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Frequent walking, standing, sitting within the work area. * Lifting of up to 50 pounds less than one-third of the time. * Ability to sit/stand/walk for extended periods of time. * Ability to effectively communicate with employees, management, peers, et al. * Ability to work in extreme hot/cold environments for lengthy periods of time. Work Environment: The work environment characteristics described here are representative of those of a standard office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Travel up to 100% required. * Ability to work in all temperatures, climates and weather conditions. * The work environment is that of being in the field. * The position requires working independently, as well as part of a team. * This position requires verbal and face-to-face contact with others daily. * Frequent use of a computer is necessary. * This position requires use of all general office equipment.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. Apply technical knowledge and expertise in determining proper equipment installation and operation. Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. Review and approve locally developed procedures and solutions to complex repair situations. Perform analysis of defects and interprets quality control rejection and failure trends. Monitor safety, training, and certification requirements. Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. Maintain Quality, Safety, Training and Certification Records. Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. Inspect forms and records related to aircraft maintenance. The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. Document maintenance as per Quality Assurance (QA) and established regulatory requirements. Comply with work order timekeeping system procedures. Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. Perform weekly Foreign Object Damage (FOD) walk-downs. Maintain situational awareness, stay cognitive-focused, and mitigate risks. Comply with processes and procedures as per DHS/DOD documents and publications. Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. Perform weekly break room and smoking area cleaning duties. Perform other duties as assigned. Minimum Requirements Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. High School Diploma or equivalent is required. Five (5) years of aircraft maintenance experience. Valid Airframe and Power Plant (A&P) License required. Valid FAA Inspection Authorization (IA) required. Possess a valid United States driver's license. Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Ability to read and interpret data is required. Ability to read, write, speak and understand English. Physical Requirements/Working Environment: Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. May be required to work night shifts. May work in Aircraft maintenance hangar or outside. Some domestic travel may be required. Compensation & Benefits Hiring Salary Rate: $126,880.00 This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our career site: *********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Thales Defense & Security, Inc. (TDSI) Headquartered in Clarksburg, MD, is a U.S. company that has been serving domestic and international defense Air, Land and Sea domains for 60 years. With over 1,000 employees, TDSI and its four subsidiaries (Tampa Microwave, Advanced Acoustic Concepts, Trusted Cyber Technologies, and Digital Receiver Technology), supports U.S. Joint Services, special operations forces and multi-national partners with a variety of communication, visualization, electronic warfare, and sensor/sonar capabilities. TDSI's key technologies include tactical handheld radios, expeditionary satellite terminals, helmet-mounted displays, optics and target recognition capability, advanced radars, undersea sensing and missile systems. Lives depend on what we do! Top Benefits (Subject to terms of applicable policies/plans) * Competitive Salary * Yearly Incentive Compensation Program * Medical insurance for self and eligible family members * Generous 401(k) program - up to 7% company contribution and 100% immediate vesting * Tuition Reimbursement * Paid wellness, vacation, and holiday leave * Paid maternity, paternity, and parental leave * 9/80 Work Schedule (every other Friday off) We currently have an opening for a Senior Quality Control Inspector - 1st or 2nd Shift in our Clarksburg, MD Campus. The Senior Quality Control Inspector will report to the Manager of Procurement Quality Assurance. First shift hours are 7:00 am to 4:30 pm. Second shift hours are 2:30 pm to 12:00 am. Second shift candidates must be able to train on first shift for 30 days. Responsibilities * Inspect electrical assemblies in accordance with IPC-A-610 and J-STD-001 standards. * Inspect mechanical assemblies in accordance with technical documentation. * Able to work unsupervised in performing inspections. * Read and interpret mechanical drawings. * Interface with the Enterprise Resource Planning system. * Communicate non-conforming material status. * Interface with Quality Engineering in support of problem resolution and continuous improvement. * Maintain high ethical standards, including compliance with all company procedures. Qualifications The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * U.S. Citizenship required. - Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. * Excellent verbal and written communications - Fluent in English. * High school diploma required. * 4-8 plus years' experience in quality, manufacturing or related technical environment. * Experience in inspecting electrical / mechanical assemblies. * Knowledge of IPC standards. * IPC-A-610 and J-STD-001 certifications required. * Ability to read and understand technical data documentation. * Experience with ERP systems; SAP S/4 Hana a plus. * Computer literate. * Ability to comply with all Company guidelines, policies, procedures and embrace Company Core Values. The hourly pay range for this role is $23.40 - $29.90 USD along with a target incentive compensation plan (ICP) of 3%. The pay range provided is a good faith estimate representative of the experience level for the role described above. TDSI considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. For specific questions about this job posting, candidates may contact talent acquisition at *********************. Thales Defense & Security, Inc. is committed to non-discrimination as applicable under federal, state and local laws. We are an E-Verify Employer. If you need an accommodation or assistance in order to apply for a position with Thales Defense & Security, Inc., please call Human Resources at ************. #LI-JK1 #LI-Onsite

Job Description Netzer Metalworks is currently hiring Quality Control Inspectors Medical and Dental Benefits, 401k, Paid Holidays Climate controlled facility. 5 years + experience recommended. Quality Control Inspectors monitor the quality of incoming and outgoing products or materials. Inspectors, are tasked with conducting tests, analyzing measurements, and overseeing production processes. • Inspecting machined parts and other finished goods for conformance to customer-defined standards. • Accurately document the results of all testing and inspections in accordance to AS9100 standards. • Maintain controlled electronic documents and test records in a timely and accurate manner. • Coordinate the calibration of all company measurement and test equipment. • Performs other duties as assigned to maintain efficiency throughout the company. • Minimum of 1- 2 year's inspection experience in a machine shop / manufacturing environment. • Ability to interpret engineering drawings. • Ability to use Standard measuring Equipment i.e. Micrometers, Calipers, Height Gauges. • Experience with PC-DMIS with CMM is a plus. • Familiarity with ISO standards a plus Powered by JazzHR 7xgenrQdEN

Summary/Objective: The Technical Service/Quality Control Technician implements and complies with quality assurance methods and procedures to ensure products and materials are produced in accordance with specifications. Essential Functions: Perform specimen tests of concrete from random loads or for special jobs or mixes; prepare test reports as required. Oversee unique jobs to ensure product standards are met, i.e., jobs that have restrictive specifications or require large quantities of material to be delivered. Perform aggregates and batch plants tests including daily graduation and moisture tests on all concrete being produced for State and spec projects. Certify concrete loads being delivered to "spec" jobs in accordance with SHA specifications; check loads for proper procedure and time of mixing. Perform quality assurance tests on trial batches of new concrete mix designs under close tolerance conditions and make adjustments until mixture meets specifications. Troubleshoot problems with customers, analyze and evaluate specific conditions, situations, quantities, etc., and provide appropriate resolution. Provide technical assistance and training to plant managers, equipment and yard operators, and drivers when requested. Perform laboratory tests including gradation, moisture, lightweight particles and specific gravity tests on aggregates. Select samples for materials that need certification by an outside laboratory or that are beyond the department capability. Transport these samples to the testing agency. Perform additional tasks such as cleaning facilities to ensure safety and cleanliness, moving equipment and materials, and completing tasks for other positions when incumbent is absent. Assist the Technical Services Manager and Assistant Manager as needed. Other duties as assigned. JOB SPECIFICATIONS Work Environment: Work time will be split between indoors/office and outdoors/field Exposure to dust and fumes/offensive smells. Exposure to chemicals such as concrete, chemical admixtures. Close proximity to moving mechanical parts. Noise level will be moderate to loud. Physical Demands: Lift a maximum weight of 50 lbs., repetitively lift 50 lbs., carry approximately 50 lbs., and push/pull approximately 75-100 lbs. Reach overhead and reach away from the body. Minimal kneeling, squatting and climbing may be required. Sit 3 hours per day, stand 5 hours per day, and walk 2 hours per day. ADDITIONAL QUALIFICATIONS Experience: Laboratory testing experience in ready-mix concrete or aggregates preferred. Special Skills: Written communication, verbal communication, and basic mathematical skills. Ability to use a computer and iPad, including Microsoft Office. Ability to use the company dispatching system. Ability to compute basic material calculations. Excellent interpersonal skills. Able to exhibit a high level of confidentiality. Excellent organizational skills. Must be able to identify and resolve problems in a timely manner. Certifications: Valid Driver's License. ACI Level 1 certification (must be obtained within 1 year of assuming position). Industry Related Experience or Skills: Background in concrete, construction, mining operations or building materials (preferred). Education Required: High School Preferred Education: N/A Bilingual in Spanish Preferred: Yes Interested in future opportunities with Chaney? Join our Talent Community to get alerts about newly posted positions. Click here to sign up!

Zachary Piper Solutions is seeking a Quality Control Inspector to support operations in Annapolis Junction, Maryland. This role will ensure quality compliance by reviewing documents, leading inspections, and coordinating with stakeholders for successful project delivery. Responsibilities for the Quality Control Inspector include: * Review contract and design documents for compliance and constructability. * Lead 3-Phase QC process and develop installation checklists. * Conduct inspections, manage punch lists, and report quality data. * Coordinate with GC/Owner and resolve quality issues. Qualifications for the Quality Control Inspector include: * Minimum 4 years of experience in construction, estimation, or quality control. * Ability to obtain a state-issued Journeyman License within 6 months of hire. * Proficient in interpreting contracts, drawings, BIM models, NEC codes, and industry standards. * Strong communication, attention to detail, organizational skills, and computer proficiency. * Associate's degree in a technical discipline or equivalent quality-related experience. Compensation for the Quality Control Inspector include: * Salary Range: $75,000 - $85,000 based on years of experience * Benefits: Medical, Dental, Vision, 401k Plan, PTO (Paid Time Off), Holidays, Sick leave as required by law This job opens for applications on 12/15/2025. Applications for this job will be accepted for at least 30 days from the posting date Keywords: Quality Control, Construction, Compliance, Inspections, 3-Phase QC, Contract Review, Document Review, Specifications, Drawings, Submittals, Constructability, Installation Checklists, Punch Lists, Continuous Improvement, Safety Meetings, Project Meetings, GC Coordination, Owner Coordination, Commissioning, NEC Codes, NETA Standards, BIM Models, Estimation, Technical Discipline, Journeyman License, Manufacturing Environment, Quality Processes, Production, Shipping, Receiving, Communication Skills, Attention to Detail, Organization, Computer Literacy, Fast-Paced Environment, Problem Solving, Stakeholder Engagement, Quality Assurance, Field Inspections, Definable Features of Work, Preparatory Meetings, Initial Inspections, Follow-Up Inspections, Data Analysis, Reporting, Construction Standards, Electrical Codes, Industry Standards, Project Delivery, Quality Issues, Resolution, Contractual Requirements, Construction Documents, Safety Compliance, Quality Management, Construction Quality, Technical Expertise, Project Coordination, Quality Monitoring, Risk Mitigation, Quality Documentation, Quality Audits, Quality Planning. #LI-VC1 #LI-ONSITE

The Quality Control Inspector ensures that all Firm-Fixed-Price (FFP) work under IDIQ contracts comply with the specified quality standards, contract requirements, and applicable codes. The inspector is responsible for proactively identifying quality issues, maintaining documentation, and supporting a culture of continuous improvement on all task orders issued under the IDIQ. **Essential Duties and Responsibilities** + Inspect all work under IDIQ task orders to ensure conformance with contract specifications, approved plans, and applicable codes. + Develop and maintain project-specific Quality Control Plans (QCPs) tailored to each task order. + Conduct and document three-phase inspections (Preparatory, Initial, Follow-Up) for all definable features of work. + Coordinate with subcontractors, government representatives, and project managers to resolve quality issues. + Prepare daily and weekly QC reports with photographic documentation and accurate records of observations. + Ensure compliance with safety standards and proactively report any unsafe conditions. + Participate in pre-task planning, submittal reviews, and material/equipment verifications. + Verify and document corrective actions and non-conformance resolutions. + Support audits and final inspections for project closeouts. **Knowledge, Experience and Skill Requirements** + High school diploma or equivalent; technical certification or associate degree preferred. + Minimum of 3 years of construction quality control experience on federal, IDIQ, or FFP-type contracts. + Familiarity with USACE/NAVFAC 3-phase QC system is highly preferred. + Strong working knowledge of construction methods, materials, codes, and QA/QC standards. + Excellent documentation, organizational, and communication skills. + Proficient with basic computer applications (Word, Excel, QC software). + Must be able to pass security clearance and background check as required by federal contracts. **Physical, Environmental and Sensory Requirements** + Work may be performed at active construction sites in varying weather conditions. + Frequent travel may be required to support multiple task orders across a geographic region. + Must be able to lift to 50 lbs., climb ladders, and navigate uneven terrain. + Limited exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc. but generally not to the point of being disagreeable. **Disclaimer** **We maintain a drug-free workplace and perform pre-employment substance abuse testing.** J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $ $54,400 - $81,600. This position may also be eligible for a wide range of competitive benefits that can include but not limited to medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: + Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. + Apply technical knowledge and expertise in determining proper equipment installation and operation. + Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. + Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. + Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. + Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. + Review and approve locally developed procedures and solutions to complex repair situations. + Perform analysis of defects and interprets quality control rejection and failure trends. + Monitor safety, training, and certification requirements. + Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. + Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. + Maintain Quality, Safety, Training and Certification Records. + Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. + Inspect forms and records related to aircraft maintenance. + The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. + The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. + Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Comply with processes and procedures as per DHS/DOD documents and publications. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform weekly break room and smoking area cleaning duties. + Perform other duties as assigned. Minimum Requirements + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent is required. + Five (5) years of aircraft maintenance experience. + Valid Airframe and Power Plant (A&P) License required. + Valid FAA Inspection Authorization (IA) required. + Possess a valid United States driver's license. + Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. + Ability to read and interpret data is required. + Ability to read, write, speak and understand English. Physical Requirements/Working Environment: + Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. + Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. + May be required to work night shifts. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required. Compensation & Benefits Hiring Salary Rate: $126,880.00 This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our career site: *********************** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .