Quality Assurance Technician jobs at Quality Custom Distribution

RESPONSIBILITIES: Maintain accurate and up‐to‐date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x‐ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history. INSPECTION: Perform inspection on complex parts using a wide variety of measuring and test equipment. Adapt and develop complex inspection set‐ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspections, source inspections, and/or complex surface plate set‐ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Recommend changes to supervision. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout all component part characteristics onto rough or semi‐machined castings, forgings and machine parts to maintain control of machining cycle during manufacturing. CALIBRATION: Perform calibration on complex multi‐function electronic measuring and test equipment. Set‐up calibration test conditions having various circuit requirements interpreting calibration procedures, specifications, manufacturer's instructions, or related documents. Ability to interpret drawings and electronic schematics. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired complex electronic equipment. NONDESTRUCTIVE TEST: Perform daily, weekly and monthly equipment and material checks. Perform pre‐inspection and post‐inspection cleaning. Set‐up equipment and conduct tests. Interpret, evaluate and document inspection results in accordance with approved procedures. Perform complete inspections in accordance with applicable specifications, standards and other contractual documents. Operate X‐ray equipment and film processor. Select the method and technique to be used for a specific inspection. Prepare and verify the adequacy of inspection procedures. Job Requirements: Five years related inspection experience or demonstrated ability to perform described responsibilities. Knowledge of applicable military standards or specifications. Required experience in CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Thorough knowledge of machine shop mathematics including trigonometry. Knowledge of electro‐hydraulic servo systems and the computer IEEE systems. Personal hand tools may be required. Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

Responsibilities: Conducts examinations and quality control inspections on products, materials and components at various stages of the production process to ensure compliance with established quality and reliability standards. Participates in analysis statistical data from processes to either confirm compliance with established standards or identify deviations from standards Performs routine visual inspection of soldered connections, mechanical inspections of electronic and electro-mechanical assemblies and subassemblies. Participates in preparing all necessary documentation for reporting acceptance/rejection of inspected and/or tested items. Qualifications: Ability to follow detailed job instructions. Able to apply a systematic Quality Assurance approach while using existing procedures to solve standard problems. Skilled at measuring and using test equipment as prescribed by job assignment. Capable of identifying and independently resolving routine issues. Experience with blueprints, drawings and parts lists. Familiar with the casting, forging, molding, stainless-steel and electronic components use in Aerospace industry. Education & Experience: Education: High School Diploma/Equivalent and work experience that will allow successful performance of job expectations. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 2-5 years of relevant experience Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

The Quality Assurance Technician is responsible for establishing and/or enhancing product and raw material specifications by conducting equipment & process capability studies such that the facility is in full compliance with corporate, customer, regulatory & federal requirements. This individual will have the unique opportunity to leverage their skills, technical expertise, and business acumen while working with a company that lives their culture every day - Miss Nothing, Question Everything and Innovate Daily. If you have a passion for developing and scoping value-driven services that lead to successful customer projects - then we are looking for you! REPORTS TO: Quality Assurance Lead ESSENTIAL ACCOUNTABILITIES: · Generating & distributing finished goods certificate of analysis to customers. · Receiving, reviewing and filing raw material & food contact packaging certificate of analysis and/or certificate of conformance in accordance with vendor specifications. · Verifying critical control points sheets (metal detection) if feasible. · Investigating and responding to customer complaints in a timely and professional manner. · Participating in in-house, customers, third party & regulatory agencies audits. · Leading off quality investigation using TPM tools such as why-why analysis, pareto charts, process capability, etc. · Developing & leading food safety training sessions. · Developing and/or updating standard operating procedures, one-point lessons, and work instructions, as necessary. · Arranging and shipping samples to outside third-party labs for micro, chemical, & physical analysis. · Performing finished product testing and releasing goods accordingly. · Generating & distributing quality reports: rework schedules, hold notices, etc. · Performing laboratory equipment calibration (if feasible). · Actively participating in all plant safety initiatives. · Actively participating in the facility TPM program which includes but is not limited to the Autonomous Maintenance & Quality Pillars. · Other duties as assigned. DISCLAIMER: This is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as assigned. Requirements QUALIFICATIONS: · High School Diploma · College from a four-year college or university preferred. · Food Science preferred but not mandatory. · The ability to read and interpret basic and complex statistical analysis. · The ability to communicate effectively both written and verbally to all levels of the organization. · Above average familiarity with Microsoft applications, SPC software (chart runner), & internet explorer not required but preferred. · Flexibility & willingness to work off shift and weekends as necessary. · Two (2) years or related experience working in a food manufacturing facility. · HACCP certification attainment within the first year of employment. · Familiarity with laboratory equipment such as but not limited to Brookfield Viscometer, Orion pH meter, Aqualab Water Activity Meter, etc. · Thorough practical and applied knowledge of HACCP, Pest Control Management, Food Allergens, Crisis Management (Food Security), Glass, Brittle Plastic & Ceramic Control, PCQI and other essential food safety programs. · The Quality Assurance Specialist will be required to work independently with little supervision. PHYSICAL JOB REQUIREMENTS: The physical demands described here represent those that an employee must meet to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · While performing this job's duties, the employee is regularly required to use hands to operate on machinery or production lines. · The employee frequently is required to stand for extended periods, often upwards of 50% of the day. · The employee is frequently required to walk, balance, stoop, kneel, squat, climb stairs, or bend, often upwards of 50% of the day. · The employee must occasionally lift and/or move up to 25 pounds and at times lift and/or move up to 35 pounds. · This job's specific vision abilities include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. (With or without corrective lenses) SAFETY: Adhere to company safety policies and procedures Wear required PPE (personal protective equipment) where needed Immediately report any unsafe conditions or other safety-related issues WORK ENVIRONMENT: While the work environment characteristics described here represent those an employee encounters while performing the essential functions of this job, they are in no way all-inclusive. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. · While performing the duties of this job, the employee regularly works in a manufacturing setting. · The employee often works at a work bench or on various pieces of equipment. · The noise level in the work environment is typically minimal. Salary Description $22.00/per hour

The QC Technician maintains quality standards by approving incoming materials, in-process production, and finished products; recording quality results. Perform equipment verification and monitoring challenges (scale calibration, metal detector challenge, checkweigher challenge) Perform pre-operation and line clearance inspections Perform ATP sampling Independently perform and document all in-process food safety and quality inspections (BOM, lot code, net weight, label review, sensory, package construction and closure) Independently perform blow molding and winding inspection (Bartlett only) Responsible for investigation and following hold procedures for out of specification components and finished goods Trained in GMP and GDP - Performs GMP-related auditing of production Maintains safe and healthy work environment by following standards and procedures; cooperation and teamwork as well as complying with legal regulations. Work overtime hours as required by business needs. Attends selected meetings and trainings as required. Perform other duties as assigned by Management Requirements Knowledge/Skills/Abilities: Computer literacy with tablets (such as iPads or other touch screen technology) General math skills Ability to read and write English Education and Experience: High School diploma or general education degree (GED) and 3-6 months related food quality experience and/or training; or equivalent combination of education and experience required Working Conditions: Office setting and warehouse environment with temperature range of 55 - 80 degrees This position may require the employee to work weekends or shifts other than their own to meet the needs of the business. Physical Requirements: Operate standard office equipment Reach with hands and arms Lift up to 35 pounds Salary Description $18 - $24 / hr plus $1.00 shift differential

:** Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. **Job Posting External** **Primary Responsibilities** + Responsible for the daily tactical quality support of manufacturing components/processes and assembly processes/outputs. + Implement containment actions for non-conformances ensuring impact to production is minimal. + Participate in quality assurance audits. + Maintain/update quality control documents. + Utilize basic inspection equipment and blueprint reading. + Assist in the evaluation and disposition of non-conforming product. + Provide metrics and input for the Quality function to other departments. + Review and verify corrective actions for effectiveness to prevent reoccurrences **Qualifications** + A two-year college degree and/or ASQ Certification as a Quality Technician preferred. + Three to five years' experience in quality and/or manufacturing related fields desirable. + Must have good problem solving skills. + Working knowledge of advanced mathematics, including statistical techniques, SPC, Capability Analysis and Gage R+R is required. + Must be able to apply quality tools for continuous improvement (FMEA). + Must know basic inspection and testing concepts, how to read blueprints and GD+T information. Must possess good communication skills - both verbal and written. + Must possess the ability to work effectively and maintain a professional composure with other employees. + Requires understanding of basic PC computer application skills, including database, spreadsheets and word-processing. **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Primary Responsibilities * Responsible for the daily tactical quality support of manufacturing components/processes and assembly processes/outputs. * Implement containment actions for non-conformances ensuring impact to production is minimal. * Participate in quality assurance audits. * Maintain/update quality control documents. * Utilize basic inspection equipment and blueprint reading. * Assist in the evaluation and disposition of non-conforming product. * Provide metrics and input for the Quality function to other departments. * Review and verify corrective actions for effectiveness to prevent reoccurrences Qualifications * A two-year college degree and/or ASQ Certification as a Quality Technician preferred. * Three to five years' experience in quality and/or manufacturing related fields desirable. * Must have good problem solving skills. * Working knowledge of advanced mathematics, including statistical techniques, SPC, Capability Analysis and Gage R+R is required. * Must be able to apply quality tools for continuous improvement (FMEA). * Must know basic inspection and testing concepts, how to read blueprints and GD+T information. Must possess good communication skills - both verbal and written. * Must possess the ability to work effectively and maintain a professional composure with other employees. * Requires understanding of basic PC computer application skills, including database, spreadsheets and word-processing. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Indianapolis Job Segment: Quality Assurance, Maintenance, Database, Warehouse, Technician, Technology, Manufacturing

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. Job Posting External Primary Responsibilities Responsible for the daily tactical quality support of manufacturing components/processes and assembly processes/outputs. Implement containment actions for non-conformances ensuring impact to production is minimal. Participate in quality assurance audits. Maintain/update quality control documents. Utilize basic inspection equipment and blueprint reading. Assist in the evaluation and disposition of non-conforming product. Provide metrics and input for the Quality function to other departments. Review and verify corrective actions for effectiveness to prevent reoccurrences Qualifications A two-year college degree and/or ASQ Certification as a Quality Technician preferred. Three to five years' experience in quality and/or manufacturing related fields desirable. Must have good problem solving skills. Working knowledge of advanced mathematics, including statistical techniques, SPC, Capability Analysis and Gage R+R is required. Must be able to apply quality tools for continuous improvement (FMEA). Must know basic inspection and testing concepts, how to read blueprints and GD+T information. Must possess good communication skills - both verbal and written. Must possess the ability to work effectively and maintain a professional composure with other employees. Requires understanding of basic PC computer application skills, including database, spreadsheets and word-processing. Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge. ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics. Records and evaluates test data and writes reports. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Enters data into computer for analysis. Prepares certificates of analysis on finished product for our customers. Able to use and read measuring instruments as well as operating instructions and procedure manuals. Trial reports, inspection and tracking. Assist QA and Technical departments in their duties. Must take responsibility for work assigned. Effective communication skills, both verbal and written. Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************. Salary Description $27.46/Hour

As a part of Hexcel, we at ARC Technologies LLC are propelling the future of flight, energy generation, transportation, and recreation through excellence in advanced material solutions that create a better world. We proudly support our military through our product offerings. Whether you are a civilian, veteran, transitioning member, reservist, or military spouse, Hexcel is committed to supporting, including, and empowering you. Where Local Community meets Global Opportunity By joining our team, you will become part of a global community of peers dedicated to creating quality parts and materials. If you have integrity, accountability, a willingness to explore new ideas, and a desire to succeed, then ARC Technologies is the place for you. Compensation $23.37 - $27.63 per hour Benefits In addition to competitive medical, dental, vision, life, and disability insurance and robust paid time off, we offer the following: Hexcel 401k with company matching contribution Employee stock purchase program Quarterly bonus potential Profit Sharing Program Paid Parental Leave Educational Assistance Program Prepaid group legal plan Hexcel is currently seeking a Quality Technician for our Amesbury, MA location. The selected individual will be responsible for but not limited to the following obligations: Use established sampling plans to perform inspection of incoming, in-process and finished product and documentation to verify conformity. Determine methodology and set up of measuring equipment / fixtures to properly measure dimensions, angles, profiles, configuration attributes and visual requirements. Complete inspection / test documentation / reports with a high degree of accuracy and efficiency in accordance with both customer contract and ARC's quality requirements. Perform First Article Inspection planning and complete FAI Reports per the AS9102 Standard Help prepare product and documentation for source inspections as required. Interpret engineered drawings, formulas, production work orders, procedures, instructions and specifications to complete the applicable inspection and documentation requirements. Confer with management and engineering to clarify and determine quality standards and requirements. Work cross functionally to understand and communicate the status of quality related activities and help prioritize work. Work cross functionally to assist in problem solving and root cause analysis on nonconformities. Recommend and help implement modifications to existing quality or production standards to achieve optimum quality within limits of equipment capability. Record and communicate discrepancies found in product quality and documentation to the Product Engineers, and Management where applicable. Prepare CoC and CoA documents in accordance requirements. Qualifications: High school diploma or GED 3+ years of Quality related work experience. Must be able to interpret engineered drawings. Possess strong hands-on ability, competent in mechanical set-up and the use of various measuring devices/equipment; such as, calipers, micrometers, height gages, radius gages, and optical measurement systems. Organized and detail oriented to ensure accuracy and completeness of work. Affinity for documentation with a mindset for thoroughness and accuracy. Professional communication skills both written and verbal to address internal and external customer issues / requirements. Proven ability to work independently with limited supervision, while keeping management informed. Strong sense of urgency and responsiveness to ensure commitments are met. Previous experience in an ISO 9001 / AS9100 facility is a plus. Experienced with MS office tools (Word and Excel) Must be able to obtain and maintain a DOD Clearance This position is restricted to U.S. citizens due to U.S. federal government contracts that require the employment of only persons who are U.S. citizens. Hexcel (NYSE: HXL) is a global leader in advanced composites technology, a leading producer of carbon fiber, and the world leader in honeycomb manufacturing for the commercial aerospace industry. Hexcel is an Equal Opportunity Employer of Minorities/Females/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, physical or mental disability, status as protected veteran, or any other protected class.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Experience the opportunity to excel in a role that sets you on a path to becoming a quality engineering expert. At nVent Management Company, we are committed to nurturing your ambition, ensuring you can develop your skills in an environment dedicated to flawless execution and world-class standards. As a Quality Technician, you will gain invaluable experience and contribute to our mission of achieving exceptional quality. You will: Shift: Weekend (Fri/Sat/Sun 6:00 am - 6:00 pm) Lead root cause problem-solving activities aimed at enhancing internal and external quality levels. Perform process validations, in-process inspections, and quality monitoring of manufacturing processes and products. Support design, manufacturing, and quality engineering functions through data collection, analysis, product reviews, and process capability assessments. Develop and adhere to Quality Management Systems (QMS) objectives, and train personnel to align with QMS standards. Conduct internal ISO standard audits and provide necessary audit support. Prepare formal documented First Article Inspection (FAI) reports for both customer and internal use. Identify and apply suitable measuring tools and equipment to confirm dimensional and functional requirements. Communicate effectively across various departments such as Operations, Supply, Manufacturing Engineering, Design, Quality, Customer Service, Production Planning, and Logistics. Lead or assist in maintaining the calibration status of inspection, test, and measurement equipment. Perform other related duties as assigned. No corrective actions or performance improvement plans within six (6) months of the job posting opening date. No decision making leaves within 12 months of the job posting opening date. Most recent performance rating achieves or higher. Successfully completed six (6) months in current job bid classification OR current career advancement classification. Requirements: High school diploma or equivalent experience. American Welding Society (AWS) Certification as Certified Welding Inspector preferred. Proficiency in reading blueprints; knowledge of Geometric Dimensioning and Tolerancing (GD&T) is a plus. Interest in academic and career development preferred. Minimum of 2 years of experience in quality. Preferable experience with precision metal fabrication measurement tools and techniques. Strong knowledge of charting and process control methods. Familiarity with Quality Management Systems (QMS) is preferred. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $20.40 - $37.80 Per Hour Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

The Quality Technician supports the quality function with respect to addressing customer and supplier quality issues, and disposition of defective material. Duties supporting this role would include notification to suppliers and root cause and corrective action analysis of internal/external escapes. In addition to representing the customer in inspecting castings according to their requirements and work instructions. Who are we? This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 100 years! We specialize in manufacturing aluminum and magnesium products for commercial, regional, corporate and military aircraft and engines. What will you do? * Facilitate shipment of customer products by verifying requirements & specifications while functioning as the Designated Quality Representative (DSQR) for CPP customers * Process inspection paperwork and interact with customer portals and procedures * Collaborate with Quality Engineering, Product & Process Engineering and Production personnel to aid process improvement teams; analyze product and process non-conformances; determine root causes, establish mistake proofing concepts and activities, follow-up on action plans * Ability to use benching, blending hand tools * Perform casting dimensional inspection using basic measurement tools * Participate and assist in continuous improvement activities with Supervisor & Leads What will you need to be successful? * AS13001 certified preferred * High school diploma or equivalent required, associate's degree in quality or related field preferred * 2+ years previous experience in Quality Assurance required (Aerospace Industry Preferred) to include inspections and audits * Ability to obtain customer certification in product inspection to include ASA13001 * Attention to detail, ability to communicate at all levels of the organization, working knowledge of MS Office Suite (Word, PowerPoint, Excel), ability to work with others through complex situations What do we have to offer? * $24-26/ hr. * $1.00 increase after 60 days of employment and successful completion of training packet * 5% quarterly bonus potential * Upward mobility and advancement opportunities * Annual holiday party and company picnics * Paid training * Educational Assistance up to $5,000 per year * 401K, up to 3% company match * 12.5 days of accrued paid time off/ ESST * Paid holidays Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ************************ Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position

Quality Technician Reports to:Assistant Quality Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience Specific Duties: Perform first piece, in-process and final inspections Provide inspection results to Quality Engineer for inclusion in PPAP's Understand cosmetic part requirements based on specific customer standards Provide inspection support based on needs of Manufacturing and Engineering Managers Maintain up to date documentation by completing all necessary paperwork i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc. Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection Provide continuous feedback to the Assistant Quality Manager regarding quality, engineering and manufacturing-related issues Suggest process improvements Perform part and process related internal audits Maintain QA Lab and equipment in clean, orderly condition Special projects and assignments Physical Requirements: Regularly lifts and/or moves 25-50 pounds Requires frequent reaching, handling and grasping Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Quality Technician Reports to: Assistant Quality Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience Specific Duties: Perform first piece, in-process and final inspections Provide inspection results to Quality Engineer for inclusion in PPAP's Understand cosmetic part requirements based on specific customer standards Provide inspection support based on needs of Manufacturing and Engineering Managers Maintain up to date documentation by completing all necessary paperwork i.e. in-process inspection records, signing off on travelers, 1st piece inspection tags, etc. Perform basic training as required for operator or team leader for First-Piece and In-Process Inspection Provide continuous feedback to the Assistant Quality Manager regarding quality, engineering and manufacturing-related issues Suggest process improvements Perform part and process related internal audits Maintain QA Lab and equipment in clean, orderly condition Special projects and assignments Physical Requirements: Regularly lifts and/or moves 25-50 pounds Requires frequent reaching, handling and grasping Requires occasional climbing of stairs, balancing, bending, crouching, fine manipulation and feeling This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Chili, NY SUMMARY: Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. This position can present the motivated employee with several career options as the company grows and he/she gains expertise and knowledge. HOURS: 7pm - 7am on a 2-2-3 scheduled ESSENTIAL DUTIES AND RESPONSIBILITIES: Performs visual inspections and physical tests utilizing equipment in Lab. Products are tested for a variety of qualities such as dimensions, performance or chemical characteristics. Records and evaluates test data and writes reports. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Enters data into computer for analysis. Prepares certificates of analysis on finished product for our customers. Able to use and read measuring instruments as well as operating instructions and procedure manuals. Trial reports, inspection and tracking. Assist QA and Technical departments in their duties. Must take responsibility for work assigned. Effective communication skills, both verbal and written. Support and follow all plant Safety Rules, GMPs, and other procedural training requirements. Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience

General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: Know & understand the use of all inspection equipment including (but not limited to): Micrometers Calipers Dial Indicators Height Gages Optical Comparators Gage Pins and Gage Blocks Sine Blocks and Setups Surface Finish Testers CMM Thread Gages Understand basic Geometric Tolerance. Able to read and understand drawings Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949 Ability to multitask in response to numerous demands; time management skills Computer literate: Excel, Word, etc. Attention to detail Desired Skills: Experience with inspection and measuring equipment calibration Previous auditing experience and skills Experience writing procedures and work instructions PPAP documentation experience

Experience high-performance, customer-centric inbound-to-manufacturing logistics, powered by cutting-edge technology. Comprehensive Logistics (CLI) is expanding, and we need driven Quality Technician 1st Shift leaders like you! Especially if you thrive in: · Fast-paced, innovative technology-based environment · Opportunities to grow and make an impact · Be part of the CLI team that values team members Apply today and fuel the momentum! POSITION RESPONSIBILITIES: · Maintaining quality-assurance processes, testing products, and recording and analyzing results data during product development and manufacturing. · Following through on set processes and ensuring adherence to best production practices. · Ensuring adherence to product quality standards, as well as monitoring the efficiency and cost- effectiveness of product output. · Update internal charts for any CSI activity. · Complete shift data collection activity report. · Perform Internal Audits of Process. · Perform Layered Process Audits. · Audit new/replacement team members to make sure they understand the area of assignment. · Photograph and report supplier non-conformance. · Work with superintendents to drive corrective action and five-phase reporting. POSITION REQUIREMENTS: · A minimum of 2+ years' experience within a quality support role. · Experience within the Automotive, Industrial, Manufacturing, and/or Supply Chain/Logistics Industries are highly preferred. · Previous experience as a quality technician or related role is preferred. · Ability to interpret technical specifications and documentation. · Excellent attention to detail and ability to identify defects or non-conformities. · Strong problem-solving skills and ability to work effectively in a team environment. · Excellent oral and written communication skills to collaborate with cross-functional teams and communicate quality-related issues. · Ability to take initiative, identifying potential problems and solutions. Schedule/ Shift: 1st Shift (6:30 am - 3:00 pm) Location: Denton, TX Travel Requirements: 0% Over Time: based on business needs. Benefits/Perks: Benefits: Medical, dental, vision, life insurance, 401K match, & PTO Career development: Opportunity for advancement Training: Comprehensive training to fuel your growth and success! About The Company Built for precision. Engineered for the future. When ultimate precision and operational reliability are non-negotiable, CLI delivers. As the most advanced 3PL partner in the industry, we integrate cutting-edge technology, machine learning, and process-driven execution to optimize workflows, eliminate inefficiencies, and ensure flawless delivery. More than a logistics provider, CLI is a true embedded partner - ensuring your supply chain moves with unmatched quality, speed, and control. Comprehensive Logistics is committed to creating a diverse environment and is proud to be an equal opportunity employer.

Experience high-performance, customer-centric inbound-to-manufacturing logistics, powered by cutting-edge technology. Comprehensive Logistics (CLI) is expanding, and we need driven Quality Technician 1st Shift leaders like you! Especially if you thrive in: * Fast-paced, innovative technology-based environment * Opportunities to grow and make an impact * Be part of the CLI team that values team members Apply today and fuel the momentum! POSITION RESPONSIBILITIES: * Maintaining quality-assurance processes, testing products, and recording and analyzing results data during product development and manufacturing. * Following through on set processes and ensuring adherence to best production practices. * Ensuring adherence to product quality standards, as well as monitoring the efficiency and cost- effectiveness of product output. * Update internal charts for any CSI activity. * Complete shift data collection activity report. * Perform Internal Audits of Process. * Perform Layered Process Audits. * Audit new/replacement team members to make sure they understand the area of assignment. * Photograph and report supplier non-conformance. * Work with superintendents to drive corrective action and five-phase reporting. POSITION REQUIREMENTS: * A minimum of 2+ years' experience within a quality support role. * Experience within the Automotive, Industrial, Manufacturing, and/or Supply Chain/Logistics Industries are highly preferred. * Previous experience as a quality technician or related role is preferred. * Ability to interpret technical specifications and documentation. * Excellent attention to detail and ability to identify defects or non-conformities. * Strong problem-solving skills and ability to work effectively in a team environment. * Excellent oral and written communication skills to collaborate with cross-functional teams and communicate quality-related issues. * Ability to take initiative, identifying potential problems and solutions. Schedule/ Shift: 1st Shift (6:30 am - 3:00 pm) Location: Denton, TX Travel Requirements: 0% Over Time: based on business needs. Benefits/Perks: * Benefits: Medical, dental, vision, life insurance, 401K match, & PTO * Career development: Opportunity for advancement * Training: Comprehensive training to fuel your growth and success! About The Company Built for precision. Engineered for the future. When ultimate precision and operational reliability are non-negotiable, CLI delivers. As the most advanced 3PL partner in the industry, we integrate cutting-edge technology, machine learning, and process-driven execution to optimize workflows, eliminate inefficiencies, and ensure flawless delivery. More than a logistics provider, CLI is a true embedded partner - ensuring your supply chain moves with unmatched quality, speed, and control. Comprehensive Logistics is committed to creating a diverse environment and is proud to be an equal opportunity employer.