Quality technician jobs in Wyoming, MI - 291 jobs

Short & Sweet: This position requires responsibility for accurately testing all samples pertaining to in-process monitoring and final product analysis for adjustments by production and the determination or disposition of all products. Schedule: 6:00 AM - 2:30 PM * Holiday's & Weekends Required* * $1.00 shift premium between 6 PM and 6 AM Job Responsibilities: * Test all performance procedures for each product code, monitoring finished weights, packaging tare weights, melts, fines, and oversize cut quality, compaction, scale accuracy, finished product coding and package integrity. * Advise appropriate management personnel about specification conditions, recommending corrective measures, and when necessary, placing product on hold. * Obtain, pack and ship samples as specified while maintaining accurate records. * Ensure product is free of extraneous through periodic process checks and record keeping, including monitoring GMP's and proper metal detector checks. * Represent Allendale Quality Execution during Corporate, regional, customer, or regulatory visits. * Perform all duties in a safe manner while observing all SOP and GMP guidelines Requirements: Minimum * Demonstrated ability to complete work assignments with high degree of accuracy * Able to read, write, and perform intermediate mathematical calculations * Must be able to lift 30 lbs. at waist level (39") monthly * Must be able to climb stairs hourly * Must be able to communicate verbally and in writing * Must be 18 years of age * Must be able to support 24/7/365 Leprino uses Psychemedics for a 90-day hair follicle drug test as part of the employee pre-employment process and also participates in E-Verify. All employees in our manufacturing facilities are required to wear Personal Protective Equipment (PPE) as mandated by their role and location.

Job Title: Customer Quality Technician Department : Quality Reports to: Quality Manager Prepared By: Joel Rus Approved By: Aniket Maske FLSA Status: Non-Exempt SUMMARY The Customer Quality Technician (QCT) plays a critical role within the Quality team, supporting the Customer Quality Engineering team. This role is a hands-on introduction to Quality Engineering. CQT will assist or own customer complaints and provide admin support to enhance our customer service. Working closely with our Quality Engineers, writing working instructions, supporting root cause investigations, running engineering trials and assisting with manufacturing improvements and implementation. In this role they will have the opportunity to learn many engineering principles, apply them in real time and build a foundation of engineering skills they can build on. ESSENTIAL FUNCTIONS Assist in root cause investigations, data gathering, sample collection, and part verification for customer issues. Focus on ownership of RMA's, sort tracking, 8D updates and other Plex modules. Create and revise PowerPoint presentations to enhance communication with customers and manufacturing teams, or for training purposes. Help draft, edit, and organize corrective action documents (8Ds) under QE guidance (not assistant). Assist with Layered Process audits, inspection checks, and error proofing / corrective action. Collaborate with engineering and manufacturing teams to find and fix gaps in work instruction documentation, measurement methods and instruction issues to improve overall quality. Develop, create, and revise work instructions (QJIs), setup instructions, and visual aids. Train manufacturing teams on QJI's, quality procedures, measurement methods, measurement setup, and GD&T basics. Support on-the-floor corrective action or process improvement effectiveness through audits and verification. Perform tasks with minimal supervision, ensuring consistent adherence to safety, quality, and company protocols. Ensure all company safety policies and procedures are followed by modeling safe behavior. All other responsibilities as assigned by your supervisor. COMPETENCIES Integrity Team player Flexibility and Adaptability Resilience and Follow-Through EDUCATION & EXPERIENCE High school diploma or GED required. Minimum 3-5 years of experience in a manufacturing, quality, or technical role. Familiarity with Geometric Dimensioning & Tolerancing (GD&T) and ISO/AS9100 standards is a plus. Knowledge of corrective action process (8D's) Lean training a plus Experience in IATF 16949 preferred. TECHNICAL SKILLS & ABILITIES Proficient in Microsoft Office (Excel, Word, & PowerPoint) and ERP software (e.g., PLEX). Strong understanding of measurement tools, including calipers, micrometers, and optical comparators. Ability to read and interpret technical drawings, specifications, and inspection standards. Regular and consistent attendance is essential. SOFT SKILLS Clarity of speech and writing Knowing when to communicate Open-Mindedness Adaptability Trustworthiness Attentiveness Coachable and willingness to learn PHYSICAL DEMANDS Seated Standing Stooping Repetitive motion Lifting - and or move up to 35 pounds, and occasionally lift and move up to 50 pounds. Reaching Workplace chemicals Requires close vision, depth perception, and the ability to adjust focus. Working in a production facility with moving mechanical parts and industrial chemicals. WORK ENVIRONMENT The work environment characteristics described below are representative of those a team member may encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Regular exposure to moving mechanical parts. Noise levels in the work environment are typically moderate, although hearing protection is required. Benefits: Medical - 1st of the month following hire date. Dental, Vision, Short Term Disability, & Life Insurance Free ASPC Health and Wellness Clinic - located in Grand Haven $100 annually for safety boots Prescription safety glasses program Paid Holidays & your birthday is a paid holiday. Automatic Spring Products Corporation is an Equal Employment Opportunity and Affirmative Action Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, protected veteran status, or disability status. We are committed to the full inclusion of all qualified individuals and will take the necessary steps to ensure reasonable accommodations are provided for those with disabilities throughout the application and interview process, as well as during employment.

Job Title: Quality TechnicianJob Description The Quality Technician will work on the engineering team, supporting engineers with non-routine engineering development activities and evaluating returned products from customers. The role involves providing expertise in inspection methods, using metrology and calibration correctly, and supporting the inspection of incoming components and materials. Additionally, the technician will oversee and lead within the Quality Lab, managing daily receiving, in-process, and final inspection activities. Responsibilities + Participate in the development of inspection plans for receiving, in-process, and final inspections. + Lead and conduct inspections to support quality lab operations and overall operational requirements. + Provide training and guidance to inspector staff and operations personnel on the correct use and care of metrological instrumentation. + Inspect metrology for cleanliness, calibration status, and overall operation. + Guide and recommend sourcing new metrology and methods for ongoing improvement. + Manage material rejections directly with suppliers, including handling NC and CA reporting requirements. + Oversee calibration processes. Essential Skills + Experience with PPAP documentation. + Proficiency in GD&T and reading/interpreting engineering drawings. + Experience with measurement instruments such as CMMs and/or calibration devices. + Familiarity with ISO standards. + First Article Inspection experience. + Experience in documentation and records control. Additional Skills & Qualifications + Associates Degree in Engineering. + Experience with Optical Comparator. Work Environment This role is based at the Kalamazoo facility, a satellite operation with a total of 50-60 employees. The Quality Team includes 2 Quality Engineers, 2 Quality Technicians, and Quality Inspectors. The Quality Technician will work in the quality lab, directly supporting the engineering team and receiving direction from the 2 Quality Engineers. Standard work hours range from 40-45 hours per week. The facility specializes in end-to-end contract manufacturing and assembly of medical devices, registered with the U.S. FDA and Health Canada. Job Type & Location This is a Contract to Hire position based out of Kalamazoo, MI. Pay and Benefits The pay range for this position is $24.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kalamazoo,MI. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job Description Job Title: Quality Technician Pay: $21/hr Schedule: 1st and 2nd shift both available Responsibilities Perform in-process and final inspections of manufactured components and assemblies Inspect incoming materials to verify conformance to specifications Read and interpret blueprints, work instructions, and quality standards Use precision measuring equipment including calipers, micrometers, gauges, and fixtures Document inspection results and maintain accurate quality records Identify non-conforming material and initiate corrective actions Support root cause analysis and continuous improvement activities Assist with audits, PPAPs, and customer quality requirements as needed Communicate quality issues clearly with production and engineering teams Follow all company safety, quality, and ISO procedures Qualifications High school diploma or GED required; technical training preferred Previous quality inspection or quality technician experience in manufacturing Ability to read blueprints and understand basic GD&T Experience using measuring and inspection tools Strong attention to detail and problem-solving skills Basic computer skills for documentation and reporting Ability to stand for extended periods and lift up to 50lbs Preferred Qualifications Experience in automotive or furniture manufacturing Familiarity with ISO/IATF quality systems Experience with PPAP, SPC, and corrective action processes Strong communication and teamwork skills #TSTRATHP By providing your mobile number, you consent to receive text messages from Talent Strategy regarding your job application, interviews, and employment updates. Standard messaging rates may apply. Consent is voluntary and is not required to apply. You can opt out anytime by replying STOP or contacting us directly. View our Privacy Policy at **************************************

Roskam Foods Position Title: Quality Technician Reports to: Quality Supervisor Position Description and Purpose: Founded in 1923 and headquartered in Grand Rapids, Michigan, Roskam Foods is a leading contract manufacturer that partners with world-renowned food brands, retailers, and food service providers to produce a myriad of frozen, refrigerated and shelf-stable products. We're a scaled, diversified operation with over 2 million square feet of manufacturing and 50 production lines across 8 facilities in the U.S. and Canada. We believe in the power of purpose-driven leadership to generate value for all. And we're on a mission to optimize the potential of our people and brands. We are passionate about multiplying possibilities for our employees and our partners. Key Responsibilities: The Quality Technician will ensure quality goals are met through an operational and analytical focus, an attention to detail, defect detection and corrective/preventative action, with strong internal partnerships with the production department. This is a fast passed job that requires walking, standing, and satisfactory multitasking. The Quality Technician will: Be responsible for monitoring and maintaining key indicators of product quality and safety through inspection, testing and communication. Promote maintenance of food safety and quality programs, HACCP, allergen control, ingredient control, GMP's, document control, traceability, product quality reviews, and corrective/preventative action. Be responsible for reporting any deviations in quality processes to the Quality Supervisor. Have a hands-on approach and strong interpersonal skills that allow you to become familiar with the plant processes and work with others to ensure alignment and drive continuous improvement within the daily operations in the plant. Ensure alignment of plant procedures with quality policy and SQF elements Ensure all testing and inspections are aligned with plant quality procedures and specifications Develop a strong knowledge of plant floor activities Support the maintenance of SQF certification Required and Preferred Qualifications: #High school diploma and/or equivalent experience Working knowledge of quality systems to ensure food safety and quality Strong interpersonal skills, strong documentation skills Working knowledge in Microsoft software and computing skills The ability to follow standard operating procedures 1+ years of industry experience in quality systems Two year or BS degree in scientific field Working knowledge of basic laboratory equipment (scales, thermometers, calipers, analyzers). Roskam Foods offers a competitive compensation package including medical, dental and vision benefits, life and disability insurance, and a 401K plan with company match. AAP/EEO Statement: Roskam Foods is a recognized veteran friendly and equal opportunity employer. #INDHP

The Quality Technician is responsible for performing inspections, measurements, tests, and data collection to ensure that components and finished products meet company quality standards, while supporting the day-to-day quality initiatives and solutions. This role plays a critical part in identifying nonconformances, maintaining inspection records, supporting root-cause investigations, and ensuring consistent product quality throughout production. ESSENTIAL FUNCTIONS Reasonable accommodations will be arranged to enable individuals with disabilities to perform the essential functions. Assist with development and documentation of Quality Management System (QMS) processes, procedures, and control criteria. - System level documentation that is instrumental to organizational structure. Document, update, and maintain quality standards, visual guides, and inspection criteria to ensure consistent evaluation across all production areas. - Hands on, operational documents. Maintain and enter daily inspection results into quality databases. Maintain all communication and coordination with our testing facility. Maintain document control process in accordance with GR Chair standards. Conduct product tear-downs and dimensional verifications as needed. Perform in-line audits of manufacturing processes and products to verify they are in accordance with the print, work instructions, or other controlled documentation. Perform root cause analysis to determine the source of customer complaints and support the operation teams and associates on implementations of corrective action. Inspect incoming raw components to ensure products meet production requirements. Inspect nonconformances to determine root cause and rework plausibility. Complete final inspections of finished furniture to verify dimensional accuracy, fit, function, and aesthetic quality. Work collaboratively to continuously improve all aspects of GR Chair product quality and production/testing processes. Work with Tooling Designers and Tool Technicians to ensure tooling and fixtures meet the expectations required to meet quality and production demands. Works safely and follows all safety rules and regulations.

JOB TITLE: Quality Technician (Dimensional) FLSA STATUS: Non Exempt REPORTS TO: Technical Manager, Dimensional Engineering Utilizing the latest PC-DMIS CMM Programming Software, product CAD data, and customer drawings (GD&T) this position is responsible for developing the measurement programs and collecting the measurement data used by engineering and manufacturing to ensure the products we sell meet or exceed our customers' expectations. The Quality Technician (Dimensional) is responsible for creating inspection reports, providing reasoned feedback regarding the products being measured, and maintaining traceability between the inspection reports, CMM Programs, Product CAD, and GD&T Drawings. Coordinates and interfaces with Project, Manufacturing, and Quality Engineers and Program Managers to ensure customer requirements are met. RESPONSIBILITIES AND DUTIES Under general supervision, the Quality Technician (Dimensional) is responsible for the following tasks: Directs, Develops, and Performs Dimensional Inspections to ensure compliance with engineering and customer specifications. Develops Inspection Programs that satisfy the requirements outlined in laboratory requests, supplied GD&T drawings and other customer specifications. Performs multi-piece dimensional inspections that utilize CMM, Optical Comparator and/or other appropriate measurement equipment to ensure the collection of accurate measurement information. Records measurements, reviews, and compiles measurement results into official reports Identifies issues during the inspection process and provides feedback to the requisitioning engineer. Works within the lab schedule to ensure that inspection projects are completed on time and equipment is utilized efficiently. Preforms verification of metrology equipment (ASME B89), maintains equipment performance logs. Performs Gage Certification, CMM Gage R&R and Capability Studies Other duties and tasks as assigned. EDUCATION AND EXPERIENCE A minimum of 6 years CMM experience with at least 4 years of programming experience SKILLS AND ABILITIES: A working knowledge of PC-DMIS CMM Programming Software and Microsoft Excel A working knowledge of Geometric Dimensioning and Tolerancing (GD&T) and the interpretation of engineering drawings. Possesses good spatial reasoning. Fluent in English. Possesses the ability learn quickly and make reasoned decisions based on limited information as demonstrated by a minimum score of 50 on the Wonderlic Select Assessment (Traditional score of 20 on the cognitive portion). Automotive quality control and CAD experience is a plus. Agreement to complete all post-hire required training. TRAVEL REQUIREMENTS This position typically does require less than 5% travel. DISCLAIMER The information contained in this job description is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time.

Job Title: Quality Technician Starting pay: $20.50 Shift: 2nd shift Reporting to the Senior Quality Engineer, the Quality Technician is responsible for many duties within the quality department including but not limited to floor auditing, CMM operation, gage control, dock audits, assisting in sort operations, etc. Responsibility Perform quality audits and communicate results as directed. Assist in quality product purges. Issues Quality Alerts. Respond to Production help chain calls. Quarantine suspect material and establish a clean point. Assist Sr. Quality Engineer & Manager as necessary to complete assigned tasks. Act as Quality representative at designated times. Assist Production Manager & Leads as necessary. Performing general housekeeping duties in work areas as well as with tools and equipment. External Liaison Auditor Work with customers and suppliers on Quality concerns or issues. Provides RMA's & SRA's for returned material. General office duties as assigned. Other duties as assigned. Academic/Educational Requirements High School Diploma or equivalent required. Required Skills/Experience 18 + months of Auditor experience in a manufacturing environment. Must be able to understand work instructions. Ability to work independently with little supervision. Must be able to obtain/maintain IATF Internal Auditor certification (Internal Liaison) Understands quality management system. Must be able to write and complete required paperwork. Must have basic math skills - add, subtract, multiply, and divide. Must be able to communicate effectively. Must be team-oriented, able to problem-solve and troubleshoot. Familiarity with Microsoft Office (Outlook, Excel, Word, etc.) Ability to navigate Plex system. What Linamar Has to Offer Competitive Compensation Employee Benefits package includes but not limited to, Drug, Dental & Vision etc. 401k Program Opportunities for career advancement. Sustainability Counsel Community based outreach supporting both local and global initiatives and charities. Discounts for local vendors and events, including auto supplier discounts. About Us Linamar is a Canadian company founded in 1966. Since it's inception, Linamar has experienced tremendous growth. Linamar is a global leader in manufacturing solutions and world class developers of highly engineered products with a focus on Mobility, Infrastructure, Food, Medical, Power and Water. At Linamar, we believe that a well informed, well trained and safety conscious employee is the key to success. With cooperation and teamwork, we can achieve and maintain both job security and job satisfaction. Linamar Corporation is an equal opportunity employer and encourages diversity in the workplace without regard to any basis protected by applicable federal, state, or local law. Linamar Corporation encourages applications from all qualified individuals and will reasonably accommodate applicants throughout all stages of the recruitment and selection process upon request. INDLSPT

Join the CollisionRight Team as a Detailer / Quality Support Technician! WHY JOIN US COLLISIONRIGHT At CollisionRight, we believe in more than just repairing vehicles we re restoring confidence, pride, and performance for every customer we serve. When you join our team, you become part of a family-driven culture that values expertise, integrity, and care. We celebrate wins, reward hard work, and invest in you . Whether you re growing your career in the collision repair industry or looking for a supportive environment where your contributions truly matter, CollisionRight is a place you can thrive. What You Can Expect Competitive pay & bonus opportunities Paid holidays, floating holidays & PTO Comprehensive medical, dental & vision insurance Company-paid life insurance Supplemental life & disability coverage 401(k) with company match Paid parental leave Paid training & ongoing development opportunities A supportive, team-oriented environment built on respect, collaboration & care POSITION SUMMARY The Detailer / Quality Support Technician plays a critical role in delivering an exceptional final product to our customers. This position is responsible for performing thorough vehicle detailing and quality inspections prior to customer delivery, ensuring all repairs meet CollisionRight s high standards. This role also supports shop operations by assisting with facility maintenance, organization, and cleanliness, helping create a safe, efficient, and professional work environment. ESSENTIAL FUNCTIONS & RESPONSIBILITIES Perform detailed cleaning and final detailing of vehicles prior to customer delivery Conduct visual inspections of repaired areas and promptly report any concerns or defects to the General Manager or assigned technician Support general shop and grounds maintenance to ensure a clean, organized facility Inspect goods and completed work according to quality and safety standards Assist with ensuring test equipment is calibrated and functioning properly Follow all safety procedures, use required PPE, and comply with hazardous waste disposal guidelines Participate in monthly safety meetings Maintain organization and proper function of tools and equipment in the detail department Identify opportunities for improvement in quality control processes Perform daily cleaning duties including sweeping, mopping, dusting, trash removal, and restroom upkeep Make minor repairs as needed (e.g., changing light bulbs) QUALIFICATIONS High School Diploma or equivalent Valid Driver s License with a good driving record Prior automotive industry experience preferred but not required Strong attention to detail with excellent verbal communication skills Mechanical aptitude a plus Ability to work independently in a fast-paced environment Flexibility to assist with various shop needs as they arise Team-oriented mindset with a commitment to customer satisfaction Ready to Take Pride in Your Work? If you re dependable, detail-oriented, and looking to be part of a company that values your contributions and supports your growth, we d love to meet you. Apply today and become part of the CollisionRight family! This position description is intended to be dynamic and subject to change. Position requirements and essential functions may be altered from time to time based upon the needs of the organization and department. This position may be required to execute special projects or other related duties on occasion.

Description & Requirements Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. GENERAL PURPOSE: Assist Quality Manager on QS development and implementation. Perform testing and release activities in the operation, maintain quality records and develop test/inspection protocol pre-production. Essential Job Functions * Performs in-process inspections and advises Operations on status of jobs verbally or in writing. * Determines acceptability of product and initiates action for handling of nonconforming product. * Performs quality control outgoing assessment of customer samples, product, and quality records. * Conducts final inspection and batch/ticket reviews. * Completes final sample inspection and analysis as required. * Trains and monitors the work of ad hoc temporary inspectors. * Maintains internal customer quality records. * Performs quality inspections of nonconforming internal and external product. * Provides training on quality systems as required. * Completes all ISO forms and quality checks for each job in a timely and accurate manner. * Assists in document training. * Completes monthly safety audits of fire protection equipment. * Performs job duties in accordance with all federal, state, local, and company safety rules. * Performs other job duties as assigned. Qualifications * High school diploma or general education degree (G.E.D.). * Must have previous QC/Inspection experience in a printing/packaging operation is desired. * Must be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Must be able to use precision testing instruments including micrometers, calipers, densitometers, and opening force testers. * Must be able to perform basic arithmetic including addition, subtraction, multiplication, and division. * Must have understanding of and be able to apply basic statistical sampling and acceptable quality level concepts. * Must have basic personal computer skills including email, and word processing. * Must be able to communicate effectively with all levels of the workforce. * Must be reliable and dependable * Must be able to perform all essential functions of this job with or without reasonable accommodation. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

Job DescriptionQuality Technician Full-Time | Kalamazoo MI Precision Matters Here. So Do You. Gaishin Manufacturing is hiring a Quality Technician who knows that details make the difference between “good enough” and world-class. If you're sharp, hands-on, and confident working independently in a manufacturing environment, this role puts you at the center of what we do: delivering high-quality parts that meet demanding customer and industry standards. This is a great opportunity for someone who enjoys inspection work, data-driven quality control, and being trusted to own their craft. What You'll Be Doing As a Quality Technician, you'll be responsible for executing inspection and quality control activities that keep production moving and standards high. Your day-to-day will include: Performing in-process and final inspections on manufactured parts Completing and maintaining inspection reports and quality documentation Verifying products meet customer specifications and internal quality standards Using precision inspection tools including micrometers, calipers, height gauges, and optical comparators Ensuring all inspection and test equipment is properly calibrated Identifying, documenting, and reporting quality issues or nonconformances Collecting, organizing, and analyzing inspection data Supporting continuous improvement initiatives within quality control processes Working closely with production teams to ensure quality checks align with workflow What We're Looking For We're looking for someone who brings technical skill, strong judgment, and pride in their work. Ideal candidates will have: Experience in a manufacturing or machining environment Hands-on experience with precision measurement and inspection equipment CMM and/or automated visual measurement experience (preferred, not required) Calibration experience (a plus) Strong attention to detail and high visual awareness Solid organizational and documentation skills Proficiency in Microsoft Office (Excel, Word, reporting) Ability to read and interpret technical drawings and specifications Ability to work independently with minimal supervision Why Work at Gaishin Manufacturing We're a precision manufacturing company serving aerospace, medical, and commercial industries. We value people who take ownership, care about quality, and want to be part of a team that does things right the first time. If you want stability, growth, and work you can stand behind, you'll find it here. Ready to take the next step? Apply now.

Now Hiring Quality Technician Reports to: Quality Manager Middleby Refrigeration is seeking a motivated and dedicated Quality Technician to join our team in Greenville, MI. We are looking for someone who is passionate about maintaining high standards of product quality. This role requires a strong focus on conducting inspections, performing tests, and ensuring products meet established quality specifications. As a key contributor, you will support quality control processes, identify and report defects, and help ensure the ongoing success of our innovative product lines. As a Quality Technician, you will play a crucial role in ensuring that our products meet the highest quality standards. You will conduct product inspections, perform detailed tests, and work closely with the production team to identify and address any quality issues. If you are ready to be part of a team that values precision, innovation, and collaboration, this role is for you! Perks you can expect from us: A competitive benefits package including 401(k) matching Company provided life insurance, short and long-term disability insurance Paid time off at start Paid holidays Tuition reimbursement Employee referral program. Expected Hours of Work: This position is full-time. The general scheduled workdays are Monday through Thursday, plus overtime when required. Position Overview: Under the supervision of the Quality Manager, as a critical team member, the Quality Technician will ensure our products meet the highest quality standards. Conducting product inspections on finished product as well as inspecting in process product, raw material and components. Performing detailed tests and working closely with the engineering and production teams to identify and address any quality issues. Responsibilities: Perform daily product audits throughout the facility and issue quality inspection reports to the engineering/manufacturing/quality team. Perform quality process audits throughout the facility supporting all departments. Inspecting equipment or materials to identify the cause of errors, problems or defects coming up with solutions for permanent fix. Conduct quality testing of materials, components, and finished goods. Inspect incoming purchased materials, components, and first piece samples. Inspect in-house metal fabrication parts. Develop and Implement quality checks throughout the facility as required. Set-up, maintenance, and auditing of end-of-line product test software. Responsible for creating quality alerts, deviations, and standard work instructions for manufacturing. RMA/Warehouse testing and reporting required to send to appropriate team members. Analyze and interpret blueprints, data, manuals, and other materials to determine specifications, inspection and testing procedures, adjustment and certification methods, formulas, and measurement instruments required. Responsible for containment activities as they relate to supplied product or finished goods facilitating required sort and testing activity. Requirements Qualifications: High School Diploma or GED Minimum two (2) years working in manufacturing. Experience in a quality or leadership position (preferred). Working proficiency in Microsoft Word, Excel, and PowerPoint. Expected to perform mathematical and statistical calculations. Experience with blueprint reading Excellent communication and interpersonal skills. With the ability to work cross-functionally and train team members on quality alerts, deviations, and standard work. Expected to have exceptional time management skills, organizational efficiency, and the ability to balance priorities. Working Conditions: Office / production floor based. 8 hour shifts Monday-Thursday If interested in the position, Click here to Apply!

What Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next. A career at Timken means you can have an immediate impact doing Work That Matters to the world- improving the efficiency of today's industrial equipment and preparing for the future of motion on our planet and beyond. New employees can start contributing right away, and there are many opportunities to advance your career at your own pace. Join our global team of 19,000 people in 45 countries, and start helping our customers push the limits of what's possible in their world of motion. Position Summary: This is a 1st shift position. The Inspector is responsible for the day-to-day completion of work assignments in compliance with Lovejoy's quality management system. The position requires a self-driven associate with quality systems body of knowledge. Responsible for applying lean manufacturing principals to help facilitated the ongoing support and execution of the quality management system. Essential Responsibilities: * Conduct and document receiving inspection, process inspection, and final inspection of product. * Conduct and document calibration of gages. * Control external calibration activities and documents. * Purchase gaging and quality supplies. * Conduct and document process audits (EASE). * Generate nonconforming product documents - work with purchasing or engineering on nonconforming material disposition. * Provide feedback to production and respond to the immediate needs of production by troubleshooting, assisting, and securing corrective action. * Perform special projects and assignments in support of the department or facility as defined by the Quality Manager. * Train production employees on proper use of gaging equipment and blueprint reading including GD&T. * Collect/analyze/report data to support key Quality metrics * Support failure analysis investigations to determine root cause of product/component failures * Ensure inspection equipment is suitable to meet the design intent and calibration is controlled. * Control record retention and organization of quality documents. * Complete first article (FAI) and final inspection and testing per military/government specification including completion/assembly of material certification, test reports, certificates of conformance and source inspection required documents. Technical/Functional Skills: * Experience in use of gages (metrology) * Experience in blueprint reading * Experience in GD&T * Experience in Gage calibration * Experience with vision inspection system and programs (e.g.: Keyence) * Proficiency with software packages (MS Office, and Statistical software) * Must have organizational, analytical, and planning skills * Ability to interface with all levels of the organization and customers * Effective communication and technical writing skills are required. Education and Experience: * High school diploma/GED required * Associates' preferred in quality control The pay range for this role is $21.00 - $28.00/hr and is commensurate on experience and education and could pay more or less than the posted range. This full-time position is eligible for paid time off, 401k, and comprehensive benefits package including medical, dental and vision. This position may require access to United States export controlled technical data ("CTD") and hardware under the Departments of US State (ITAR) and/or Commerce (EAR). Eligible candidates are; US Citizens, Green Card holders, Asylees or others eligible to receive US export license authorizations. Candidate must be authorized to work in the US. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.

Aerospace is soaring and so are we! Precision Aerospace Corp. (PAC) customers are high tech leaders in commercial and defense aerospace. Because of advancements in technology leading to significant fuel savings, the aerospace industry is positioned for unprecedented growth. We utilize leading edge technology and processes to make and deliver short run, high mix, close tolerance parts. Our customers value our track record of quality and delivery success and they are fueling our growth with new and interesting part manufacturing opportunities. Job Description To support the Quality Department's ability to achieve its goals. This includes accurately and timely auditing of company process, incoming material, work-in-process and customer shipments to achieve PAC Quality and Business objectives and to comply with AS 9100 standards. Other duties may be assigned as needed. Qualifications Perform first article (FAIR) tasks including documentation and reports. Perform 1st piece, in-process and last piece inspection using micrometers, calipers, comparators, various gauges and CMM equipment according to PAC standards and AS 9100 procedures. Submit PPAP documents. Perform incoming inspection tasks according to AS 9100 procedures. Perform final inspection and shipping tasks according to AS 9100 procedures. Perform process audits and follow-up with corrective actions. Ensure the quality of all material meets customer specifications through applicable quality policies, procedures and instructions. Cross train across multiple departments Perform data collection and communication tasks in ERP system and other applications. Perform miscellaneous quality-related clerical duties. Comply with all PAC policies. Additional Information Physical Requirements: Vision to AS 9100 standards documented by yearly vision exams. Able to stand, sit/or ambulate across the production space for long periods of time. Up to 95% of the scheduled shift. Effectively handle and manipulate parts in order to identify needed specifications. Effectively operate complex measuring instruments. Successful completion of a medical exam and drug screening required prior to employment at PAC. PAC is an equal opportunity Affirmative Action employer.

Short & Sweet: This position requires responsibility for accurately testing all samples pertaining to in-process monitoring and final product analysis for adjustments by production and the determination or disposition of all products. Schedule: 10:00 PM - 6:30 AM * Holiday's & Weekends Required* * $1.00 shift premium between 6 PM and 6 AM Job Responsibilities: * Test all performance procedures for each product code, monitoring finished weights, packaging tare weights, melts, fines, and oversize cut quality, compaction, scale accuracy, finished product coding and package integrity. * Advise appropriate management personnel about specification conditions, recommending corrective measures, and when necessary, placing product on hold. * Obtain, pack and ship samples as specified while maintaining accurate records. * Ensure product is free of extraneous through periodic process checks and record keeping, including monitoring GMP's and proper metal detector checks. * Represent Allendale Quality Execution during Corporate, regional, customer, or regulatory visits. * Perform all duties in a safe manner while observing all SOP and GMP guidelines Requirements: Minimum * Demonstrated ability to complete work assignments with high degree of accuracy * Able to read, write, and perform intermediate mathematical calculations * Must be able to lift 30 lbs. at waist level (39") monthly * Must be able to climb stairs hourly * Must be able to communicate verbally and in writing * Must be 18 years of age * Must be able to support 24/7/365 Leprino uses Psychemedics for a 90-day hair follicle drug test as part of the employee pre-employment process and also participates in E-Verify. All employees in our manufacturing facilities are required to wear Personal Protective Equipment (PPE) as mandated by their role and location.

Job Title: Quality TechnicianJob Description The Quality Technician will join the engineering team, supporting engineers with non-routine engineering development activities and evaluating returned products from customers. The role demands expertise in inspection methods, the correct use of metrology and calibration, as well as supporting the inspection of incoming components, materials, in-process fabrication parts and assemblies, and final inspection before shipments. Responsibilities + Participate in the development of inspection plans for receiving, in-process, and final inspections. + Lead and conduct inspections as necessary in support of quality lab operations and overall operational requirements. + Provide training and guidance to inspector staff and operations personnel regarding the correct use and care of metrological instrumentation, storage, and maintenance. + Inspect metrology for cleanliness, status of calibration, and general good operation. + Guide and make recommendations regarding the sourcing of new metrology and methods for ongoing improvement of technology. + Manage rejections of material directly with the supplier, including NC and CA reporting requirements as necessary. + Oversee calibration. Essential Skills + Experience with PPAP documentation. + Proficient in GD&T and reading/interpreting engineering drawings. + Experience with measurement instruments such as CMMs (Mitutoyo) and/or calibration devices. + Familiarity with ISO standards. + First Article Inspection experience. + Documentation and records control experience. + Experience with Optical Comparator. Additional Skills & Qualifications + Associates Degree in Engineering is nice to have. + Experience with Optical Comparator is preferred. Work Environment The position is based at the Kalamazoo facility, a satellite operation with 50-60 employees. The Quality Team consists of 2 Quality Engineers, 2 Quality Technicians, and Quality Inspectors. The role involves working in the quality lab, directly supporting the engineering team and receiving direction from the 2 Quality Engineers. Standard work hours range from 40-45 hours per week. The organization provides end-to-end contract manufacturing and assembly of medical devices, managing the entire process including supply chain, manufacturing, assembly, testing, labeling, packaging, and shipping. The work environment includes opportunities for development and leadership, alongside engineers who provide day-to-day direction. Job Type & Location This is a Contract to Hire position based out of Kalamazoo, MI. Pay and Benefits The pay range for this position is $24.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Kalamazoo,MI. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Founded in 1923 and headquartered in Grand Rapids, Michigan, Roskam Foods is a leading contract manufacturer that partners with world-renowned food brands, retailers, and food service providers to produce a myriad of frozen, refrigerated and shelf-stable products. We're a scaled, diversified operation with over 2 million square feet of manufacturing and 50 production lines across 8 facilities in the U.S. and Canada. We believe in the power of purpose-driven leadership to generate value for all. And we're on a mission to optimize the potential of our people and brands. We are passionate about multiplying possibilities for our employees and our partners. Roskam Foods produces and packages food products with the goal of consistently meeting and exceeding customer expectations for quality, safety, and wholesomeness. Key Essential Functions/Responsibilities: Ensure alignment of documentation with quality policy and SQF elements Develop a strong connection with departments involved in the initial product setup Develop a strong knowledge of plant floor activities Support the maintenance of SQF certification Support the maintenance of Kosher, RSPO, and Organic certification Document control Equipment calibration/verification Must be detail-oriented Good verbal and written skills, Roskam Foods offers a competitive compensation package that includes medical, dental, and vision benefits, tuition reimbursement, life and disability insurance, and a 401 (k) plan with company match. AAP/EEO Statement: Roskam Foods is a recognized veteran-friendly and equal opportunity employer. We are excited to introduce you to all that Roskam has to offer-from the many valuable benefits to programs that support your lifestyle needs and opportunities for professional development. Roskam is an equal opportunity employer.

Full-Time | Kalamazoo MI Precision Matters Here. So Do You. Gaishin Manufacturing is hiring a Quality Technician who knows that details make the difference between “good enough” and world-class. If you're sharp, hands-on, and confident working independently in a manufacturing environment, this role puts you at the center of what we do: delivering high-quality parts that meet demanding customer and industry standards. This is a great opportunity for someone who enjoys inspection work, data-driven quality control, and being trusted to own their craft. What You'll Be Doing As a Quality Technician, you'll be responsible for executing inspection and quality control activities that keep production moving and standards high. Your day-to-day will include: Performing in-process and final inspections on manufactured parts Completing and maintaining inspection reports and quality documentation Verifying products meet customer specifications and internal quality standards Using precision inspection tools including micrometers, calipers, height gauges, and optical comparators Ensuring all inspection and test equipment is properly calibrated Identifying, documenting, and reporting quality issues or nonconformances Collecting, organizing, and analyzing inspection data Supporting continuous improvement initiatives within quality control processes Working closely with production teams to ensure quality checks align with workflow What We're Looking For We're looking for someone who brings technical skill, strong judgment, and pride in their work. Ideal candidates will have: Experience in a manufacturing or machining environment Hands-on experience with precision measurement and inspection equipment CMM and/or automated visual measurement experience (preferred, not required) Calibration experience (a plus) Strong attention to detail and high visual awareness Solid organizational and documentation skills Proficiency in Microsoft Office (Excel, Word, reporting) Ability to read and interpret technical drawings and specifications Ability to work independently with minimal supervision Why Work at Gaishin Manufacturing We're a precision manufacturing company serving aerospace, medical, and commercial industries. We value people who take ownership, care about quality, and want to be part of a team that does things right the first time. If you want stability, growth, and work you can stand behind, you'll find it here. Ready to take the next step? Apply now.

Now Hiring Quality Technician Reports to: Quality Manager Middleby Refrigeration is seeking a motivated and dedicated Quality Technician to join our team in Greenville, MI. We are looking for someone who is passionate about maintaining high standards of product quality. This role requires a strong focus on conducting inspections, performing tests, and ensuring products meet established quality specifications. As a key contributor, you will support quality control processes, identify and report defects, and help ensure the ongoing success of our innovative product lines. As a Quality Technician, you will play a crucial role in ensuring that our products meet the highest quality standards. You will conduct product inspections, perform detailed tests, and work closely with the production team to identify and address any quality issues. If you are ready to be part of a team that values precision, innovation, and collaboration, this role is for you! Perks you can expect from us: * A competitive benefits package including 401(k) matching * Company provided life insurance, short and long-term disability insurance * Paid time off at start * Paid holidays * Tuition reimbursement * Employee referral program. Expected Hours of Work: This position is full-time. The general scheduled workdays are Monday through Thursday, plus overtime when required. Position Overview: Under the supervision of the Quality Manager, as a critical team member, the Quality Technician will ensure our products meet the highest quality standards. Conducting product inspections on finished product as well as inspecting in process product, raw material and components. Performing detailed tests and working closely with the engineering and production teams to identify and address any quality issues. Responsibilities: * Perform daily product audits throughout the facility and issue quality inspection reports to the engineering/manufacturing/quality team. * Perform quality process audits throughout the facility supporting all departments. * Inspecting equipment or materials to identify the cause of errors, problems or defects coming up with solutions for permanent fix. * Conduct quality testing of materials, components, and finished goods. * Inspect incoming purchased materials, components, and first piece samples. * Inspect in-house metal fabrication parts. * Develop and Implement quality checks throughout the facility as required. * Set-up, maintenance, and auditing of end-of-line product test software. * Responsible for creating quality alerts, deviations, and standard work instructions for manufacturing. * RMA/Warehouse testing and reporting required to send to appropriate team members. * Analyze and interpret blueprints, data, manuals, and other materials to determine specifications, inspection and testing procedures, adjustment and certification methods, formulas, and measurement instruments required. * Responsible for containment activities as they relate to supplied product or finished goods facilitating required sort and testing activity. Qualifications: * High School Diploma or GED * Minimum two (2) years working in manufacturing. Experience in a quality or leadership position (preferred). * Working proficiency in Microsoft Word, Excel, and PowerPoint. * Expected to perform mathematical and statistical calculations. * Experience with blueprint reading * Excellent communication and interpersonal skills. With the ability to work cross-functionally and train team members on quality alerts, deviations, and standard work. * Expected to have exceptional time management skills, organizational efficiency, and the ability to balance priorities. Working Conditions: * Office / production floor based. * 8 hour shifts * Monday-Thursday If interested in the position, Click here to Apply!