Electrical Engineer jobs at Ramboll

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. AWS is looking for a dynamic Commissioning Engineer. It is the responsibility of all Amazonians to have alignment with our leadership principles and demonstrate these at the highest level. The responsibilities of the ACx Commissioning Engineer (CxE) include, but are not limited to, oversight and coordination of multi-discipline division of work related to design review and commissioning of Amazon critical infrastructure for new construction and special projects. The CxE is responsible for supporting vendors, contractors, and other teams involved in the construction and commissioning of various systems including medium and low voltage power systems, Generators, UPS, HVAC, Chilled Water, BMS, and EPMS systems. They shall provide multi-discipline input into the scheduling, test script development, designing, and planning of projects. In addition, the CxE will be required to develop and review electrical and mechanical component and integrated systems testing along with other commissioning documents to ensure they are compliant with the basis of design, specification, industry standards and sequence of operations. It is the CxE responsibility to ensure that all commissioning procedures follow the appropriate safety practices and policies. CxE is responsible for auditing commissioning activities continuously to ensure compliance with environmental, quality, and safety requirements. The CxE proactively communicates with the ACx Regional Manager and the ACx team to ensure that the applicable test documents are created and executed in accordance with all commissioning requirements. This individual will be responsible for comprehensive weekly reporting of status of all ongoing projects, lessons learned, and program improvements to continually improve the quality of our program. This position will include coverage of multiple inflight projects and tight schedules. Key job responsibilities Physical Requirements • Walk job sites in uneven terrain • Work at heights and from ladders • Regularly walk, use hands and fingers, reach with hands and arms, stoop, kneel, crouch or crawl • Lift and/or move up to 49 pounds; and participate in group lifts for 50 pounds or more • Carry objects weighing up to 49 pounds for short distances • Work shifts longer than eight hours in duration with potential for night and weekends • Perform physical tasks throughout the day without becoming overly tired • Ability to manipulate small wires and objects easily • Work in a noisy environment • Work in environments that are colder or hotter than a normal office environment Additional Job Requirements • Ability to relocate to Northern Virginia / Greater DC area • Ability and willingness to travel domestic and internationally for up to 50% of the year. Typical travel is 20%. • Required to provide personal transportation for meetings and job visits away from the office; reimbursed. About the team Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (diversity) conferences, inspire us to never stop embracing our uniqueness. We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. #DCCD_AMER BASIC QUALIFICATIONS• 5+ years of engineering, installation, or startup/commissioning of electrical and mechanical systems • Bachelor's degree in Mechanical/Electrical Engineering or 5 years of relevant discipline work experience • High technical competency in either mechanical or electrical or control systems utilized in critical infrastructures, with the capability to learn and be trained in the others • Understand the design concept and intent by reviewing mechanical or electrical design documentation, including drawings, specifications, vendor submittals and sequences of operations and provide feedback on the same in accordance with Amazon standards for basis of design • Develop but majorly review commissioning documentation such as test plans, scripts and reports developed by vendors to ensure accuracy in accordance with the design requirements PREFERRED QUALIFICATIONS• Advanced knowledge Microsoft Office Suite - Word, Excel, Outlook required; advanced knowledge of SharePoint (or similar) preferred • Strong communication skills, detail oriented, highly organized, and able to work in high stress environments to maintain calm and respectful interaction with multiple teams • Advance knowledge of mechanical, electrical, and controls systems for critical infrastructures • Ability to read and edit construction documents (design drawings, control diagrams, specifications, etc.) • Experience developing and executing test procedures for mechanical or electrical systems/components based on design intent and approved equipment submittals Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,100/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Program: Event REQ Description:As we enter a new era of Strategic Weapon Systems, Lockheed Martin is a pioneer, partner, innovator and builder. Our amazing men and women are on a mission to make a difference in the world and every single day we use our unique skills, talents and experiences to design and build solutions to some of the world's hardest engineering problems. Do you want to be part of a culture that inspires employees to envision the impossible, perform with excellence and build incredible products? We provide the resources, inspiration and focus-if you have the passion and courage to dream big, then we want to build a better tomorrow with you. Bring your experience and passion for engineering to Lockheed Martin, and build the systems which support our nation's defense systems. We are seeking a highly motivated RF Engineer to support the design, development, and integration of advanced radio frequency systems for space-based applications. In this role, you will contribute to the end-to-end lifecycle of RF payloads and subsystems, including Earth-Space Antennas (ESAs), satellite communications links, and RF front-end electronics. You will collaborate with systems engineering, digital processing, and integration/test teams to deliver high-performance RF solutions that enable secure and reliable mission success in space environments. What does this role look like? • Design, model, and analyze space RF systems including ESAs, phased array antennas, transponders, transmitters, and receivers. • Perform link budget analysis for Earth-to-Space, Space-to-Earth, and inter-satellite communications. • Support RF payload architecture trades, including power, bandwidth, gain, and coverage optimizations. • Develop and verify RF hardware performance using simulation tools (HFSS, ADS, CST, MATLAB) and laboratory/field test equipment (spectrum analyzers, VNAs, anechoic chamber measurements). • Collaborate with antenna engineers on the design, test, and integration of reflector and phased-array antennas. • Define and validate requirements to ensure compliance with mission performance, environmental, and radiation constraints. • Document technical results and present findings at internal design reviews and with external customers. Important Notes • Candidates may be subject to a government security investigation and must meet eligibility requirements for access to classified information. • Applying to this Expression of Interest opportunity introduces you to Lockheed Martin's job opportunities and promotes you to managers who are interested in hiring for multiple roles. • You can't and will not be hired on this requisition. Actual job responsibilities, levels, and locations will vary based on actual hiring job postings. #LI-CS1 Basic Qualifications: Basic Qualifications : • Bachelor's degree (or higher) in Electrical Engineering, Physics, or related discipline. • Knowledge of RF/microwave design principles, including transmission lines, waveguides, impedance matching, and antenna fundamentals. • Knowledge or experience with RF test equipment (spectrum analyzer, VNA, signal generator, power meter). • Familiarity with satellite communications or space RF payload development. Desired Skills: • Master's degree in Electrical Engineering or related field • 2+ years of experience in space RF system design, analysis, or test • Proficiency in RF simulation tools such as HFSS, ADS, CST, MATLAB, or Simulink • Experience with Earth-Space Antennas (ESAs), phased arrays, reflectors, or electronically steered antennas • Understanding of communication system design, modulation schemes, coding, and link budgets • Familiarity with radiation, thermal, and reliability constraints for space-qualified hardware • Hands-on experience with antenna testing in anechoic chambers • Strong communication skills with the ability to convey technical concepts to leadership and customers Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: TS/SCI w/Poly Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 9x80 every other Friday off Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $101,000 - $178,135. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: SPACE Relocation Available: Possible Career Area: RF Engineering Type: Full-Time Shift: First

Immediate need for a talented Engr 3, Electrical. This is a 12+ months contract opportunity with long-term potential and is located in San Diego, CA(Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID: 25-94178 Pay Range: $65 - $70/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Requirements and Technology Experience: Key skills; Electrical Engineering, Product Development, Designing Electrical Engineering is responsible for designing and developing components, electronic packaging, electrical circuitry, and other systems used in finished equipment. Demonstrates advanced knowledge on making trade-offs between alternate design topologies. Working knowledge of Product Development Process. Provides advice on feasibility and risks for a product. Extends system design for existing products. Facilitates cross-functional knowledge and experiences to facilitate the understanding and resolution of single product development issues, concerns and risks. Responsible for coordination of product development. Serves as a key resource to examine system behavior issues and bring to resolution for existing products. Has in-depth experience, knowledge and skills in own job family. Applies knowledge and skills to a wide range of standard and non-standard situations. Works independently with minimal guidance. Usually determines own work priorities. Acts as a resource for colleagues with less experience. Our client is a leading Healthcare Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Electrical Engineer-in-Training Houston ,TX Direct -Hire Required Skills and Knowledge • B.S. degree in Electrical Engineering or related field • Successful completion of the Fundamentals of Engineering (F.E.) examination • Certified by the State of Texas as an Engineer-in-Training (EIT) • Exceptional attention to detail • Ability to manage multiple projects under strict deadlines • Ability to work well on a team • Exceptional written and verbal skills Preferred Skills and Knowledge • Knowledge of and experience with AutoCAD, Revit, Bluebeam, and Microsoft Office Suite • Knowledge of building codes • Previous experience in a MEP consulting environment • Previous experience designing MEP systems for schools • Experience in the design of lighting and lighting controls, fire alarms, power and power distribution, technology systems, as well as other standard electrical systems for commercial Supervisory Responsibilities Electrical Designers and Electrical Interns as assigned Travel 10% Occasional; primarily to and from job sites and/or client meetings

Title: Electrical Engineer FullTime Key Responsibilities Design, test, and validate hardware and analog circuits. Perform PCB design and analysis using CAD tools. Conduct diagnostics, root cause analysis, and repair/refurbishment activities. Support CGD projects to certify electronics for nuclear and other regulated industries. Collaborate with a small, entrepreneurial team to solve customer challenges. Adapt quickly to new tools, technologies, and client demands. Qualifications Must Have (1 or more of the following): Hardware design experience PCB (CAD) design expertise Electronics testing experience Analog circuit design experience Bachelor's degree in Electrical Engineering (ABET-accredited EE program required; technology

Skills: Electrical Engineer I to assist in development and sustaining engineering projects within the Electrophysiology division at Client. Education: Bachelor's Degree in Electrical Engineering is required. Computer Science or Biomedical degree okay as long as the candidate also has EE experience Duties: Participates on engineering teams in completing development projects. Leads small-scale design change efforts in support of continuation engineering activities. Completes system, analog, digital, and firmware designs. This includes setting and revising requirements and specifications, debugging, testing electrical circuits and systems, and completing documentation to ensure feasibility and verifiability of performance. Able to work cross functionally, independently, and as part of a team. Looking for a self-starter with a focus on troubleshooting. Medical device experience would be ideal but not required. Internship experience is also fine but would like to see professional experience first. Masters in EE okay with an internship.

Role: Assembly Tester Duration - 6+ mos Skills - Assembly Tester, Manufacturing Medical Devices, Electrical Engineer Experience Level Senior-Level (7+ Years) Job Summary We are seeking an experienced Manufacturing Electrical Engineer with a strong background in medical device manufacturing to support electrical assembly, testing, supplier management, and product end-of-life activities. The ideal candidate will work cross-functionally with R&D, Quality, Supply Chain, and Manufacturing teams to ensure robust, compliant, and scalable production processes while meeting regulatory and quality standards. Key Responsibilities Manufacturing & Assembly Support • Develop, optimize, and sustain electrical manufacturing and assembly processes for medical devices. • Provide hands-on engineering support for electrical assemblies, wiring, PCBAs, test fixtures, and production equipment. • Troubleshoot and resolve electrical and manufacturing issues to minimize downtime and improve yield. • Support process validations (IQ/OQ/PQ) and continuous improvement initiatives. Testing & Validation • Define and implement electrical test strategies for in-process, final, and reliability testing. • Develop and maintain test procedures, test fixtures, and automated test systems. • Analyze test data, identify root causes of failures, and implement corrective actions. • Ensure compliance with FDA, ISO 13485, IEC, and other applicable medical device standards. Supplier & Component Management • Collaborate with Supply Chain and Quality teams to manage electrical component and supplier performance. • Support supplier qualification, audits, and technical reviews. • Drive resolution of supplier-related electrical and quality issues. • Lead cost reduction, alternate sourcing, and component obsolescence mitigation efforts. End-of-Life (EOL) & Sustaining Engineering • Lead and support end-of-life (EOL) planning for electrical components and products. • Manage PCN/ECN activities, last-time buys, and redesigns due to obsolescence. • Ensure smooth transition of products through lifecycle phases while maintaining compliance and supply continuity. Documentation & Compliance • Create and maintain manufacturing documentation including work instructions, schematics, BOMs, test procedures, and validation reports. • Ensure adherence to Design Controls, Change Management, and Quality System requirements. • Support internal and external audits as required. Required Qualifications • 7+ years of experience in manufacturing or sustaining engineering within the medical device industry. • Strong experience with electrical assembly, testing, and troubleshooting in a regulated environment. • Proven knowledge of medical device regulations (FDA QSR, ISO 13485, IEC 60601 preferred). • Experience with supplier management and component lifecycle/EOL management. • Ability to read and interpret schematics, wiring diagrams, and technical specifications. • Strong problem-solving, communication, and cross-functional collaboration skills.

The Controls Software Engineer will support advanced residential energy and charging systems by developing, testing, and validating control software that manages hardware and firmware end to end. This role focuses on ensuring system quality, safety, and performance through simulation, hands-on testing, and close collaboration with cross-functional engineering teams. The position requires strong systems-level thinking and experience with real-time control software. Key Responsibilities: • Collaborate with firmware, hardware, product, and compliance teams to define control behavior requirements • Develop control models for residential energy systems using simulation tools • Implement control algorithms and integration tests using software-in-the-loop and hardware-in-the-loop methods • Perform hands-on testing, validation, and troubleshooting of control algorithms on physical hardware • Support safety and compliance testing aligned with applicable standards • Contribute to improving system performance, reliability, and overall software quality Required Qualifications: • Bachelor's degree in Computer Engineering, Computer Science, Electrical Engineering, Physics, or equivalent experience • Strong background in electrical engineering or control systems fundamentals • Experience developing software in systems programming languages such as C, C++, or Rust • Experience with real-time or embedded control systems • Strong analytical, debugging, and hands-on troubleshooting skills • Familiarity with grid or microgrid operations and safety or compliance standards Preferred Qualifications: • Experience working with microgrids, energy storage systems, generators, or battery technologies • Experience using simulation tools such as Matlab or Simulink • Exposure to firmware validation, automation, or hardware integration testing Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan, life insurance, long-term disability insurance, short-term disability insurance, paid parking/public transportation, paid time off, paid sick and safe time, hours of paid vacation time, weeks of paid parental leave, and paid holidays annually - as applicable. Pay Range: $60 - $67 per hour (depending on experience)

Immediate need for a talented PCB Designer. This is a 06-12 months contract opportunity with long-term potential and is located in Milpitas, CA(Onsite). Please review the job description below and contact me ASAP if you are interested. Job Diva ID: 25-95750 Pay Range: $43 - $45/hr. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Requirements and Technology Experience: Key skills; PCB Designer Manufacturing domain experience is required Interact with the design, development and testing teams Design muliti layer PCB Develop PCB Layout, Gerber generation Prototype manufacturing co-ordination Board bringup Bench testing Board rework as needed Troubleshooting Change impact analysis and documentation Test report preparation Work with cross-functional product development teams PLM tool handling for uploading design files Update documents and create Change Orders to release Update Design History Files (“DHFs”) based on design and test results Create PCB circuit design and layouts using Altium Designer, Cadence OrCAD/Allegro. Work with internal/external PCB artwork team ensure the design adequacy to function and performance Choose appropriate component for electrical design and create BOM Develop complex multilayer circuit, that may include RF/Bluetooth and high speed signaling, ensure signal integrity Review and update the design outcome meeting DFM and DFT Work with cross-functional teams to incorporate their constraints (OR drive the constraints to external PCB layout) and ensure design requirements are met. Perform parts equivalency when changing the components (due to EOL/obsolescence) Perform board bringup /bench testing / integration testing / characterization testing and ensure prototype design is meeting the requirements Work with PLM tool (Agile) for Chage order creation for components / deign package / special drawing/specifications, to release in the system Create design documentation and test report Our client is a leading IT Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Job Title: Verification Engineer (SystemVerilog/UVM) 5-14 years experience Responsibilities Develop and maintain UVM/SystemVerilog-based verification environments for IP, subsystem, and SoC-level testing. Understand design specifications and create comprehensive test plans based on functional and architectural requirements. Build directed and random test cases, perform coverage analysis, and ensure functional/code coverage closure. Debug simulation failures and collaborate closely with RTL designers to resolve issues. Execute regression runs, analyze results, and drive continuous improvements in verification processes. Integrate and run power-aware simulations, perform low-power checks, and work with UPF/CPF as needed. Collaborate with DFT, PD, RTL, and post-silicon validation teams to ensure design quality across domains. Document test environments, test plans, and results for internal and external reviews. Required Skills Strong understanding of SystemVerilog (SV) and UVM, with excellent debugging skills. Solid knowledge of AMBA protocols. Experience in coverage-driven verification and regression management. Familiarity with low-power verification methodologies and UPF/CPF flows. Ability to work in cross-functional teams and deliver high-quality verification solutions.

Hi Hope you are doing well ! This is Dipendra Gupta from Programmers.ai as we have an urgent open role below, please check and do let me know if you are comfortable with Job description and looking for a new role or interested. Analog Layout Engineer Cupertino CA Contract OR Fulltime Required Skills: Knowledge of analog/mixed-signal IP (e.g., SERDES PHY, transmitter and receiver, PLL, DDR PHY, ADCs, DACs, LDOs, etc.) Experienced working with the circuit designer or layout lead to plan/schedule work and negotiate any layout trade-offs as needed Reviewing and analyzing floor-plans and complex circuits with circuit designers Running complete set of design verification tools available Great understanding and experience using advanced CAD tools and mask design knowledge to deliver correct and robust layout that meet stringent matching performance, area and power requirements Experienced in crafting well-matched, low noise, and low power analog blocks consisting of transistors, resistors, capacitors, pad IO's, ESD structures, etc. Must understand issues of IR drop, RC delay, electro-migration, self-heating and coupling capacitance Must recognize failure prone circuit and layout structures, have experience with analog and DFM standard methodologies, and enthusiastically work with circuit designer or layout lead for the best approach to problems High level of proficiency in interpretation of CALIBRE DRC, ERC, LVS, etc., reports Knowledge of CADENCE Virtuoso and MENTOR GRAPHICS layout tools Best Regards, Dipendra Gupta Technical Recruiter *****************************

One of our leading client is looking for Design Verification Engineer in Sunnyvale CA Key Responsibilities: Strong understanding of SV and UVM and good debugging skills. Understanding of AMBA protocols. Understand design specs and develop test plans based on functional and architectural requirements Build UVM/System Verilog-based verification environments for IP/subsystem/SoC level testing Develop directed and random testcases, perform coverage analysis, and close functional/code coverage Debug simulation failures and work closely with RTL designers to resolve issues Execute regression runs, analyze results, and contribute to continuous improvements Integrate and run power-aware simulations, low power checks, and work with UPF/CPF as needed Collaborate with DFT/PD/RTL teams and post-silicon validation to ensure design quality across domains Document test environments, testplans, and results for internal and external reviews

Required Skills: Experience in Handset testing, commercial OEM or devices in Field / Lab Environment across 5G/4G/3G operators Experience in drive testing in the field on-site and ability to debug/troubleshoot/analyze basic device / OTA issues (camping, provisioning) between the device and the network Experience in testing, debugging, and familiarity with the Android OS Experience using QC tools like QXDM, QCAT, PCAT, etc Understanding of software development and testing concepts for wireless handsets for various air interface standards - 5G (SA, NSA, mmW, NRDC), LTE Must Have: Experience in Handset testing, commercial OEM or devices in Field / Lab Environment across 5G/4G/3G operators Experience in drive testing in the field on-site and ability to debug/troubleshoot/analyze basic device / OTA issues (camping, provisioning) between the device and the network. Experience in testing, debugging, and familiarity with Android OS Excellent written and verbal communication skills Required Education: Bachelor's degree in engineering or electrical engineering with 2 years of work experience, OR Masters Degree in Engineering or Electrical Engineering Preferred Skills/Education: Experience with Stability Testing Experience with air interface performance analysis, characterization, and optimization Experience with test planning/test case development Understanding of Physical/MAC layers and Call Processing concepts Exposure to programming in C, Perl, and Shell Scripting is a plus Enterprise Solutions Inc. is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Droisys is an innovation technology company focused on helping companies accelerate their digital initiatives from strategy and planning through execution. We leverage deep technical expertise, Agile methodologies, and data-driven intelligence to modernize systems of engagement and simplify human/tech interaction. Amazing things happen when we work in environments where everyone feels a true sense of belonging and when candidates have the requisite skills and opportunities to succeed. At Droisys, we invest in our talent and support career growth, and we are always on the lookout for amazing talent who can contribute to our growth by delivering top results for our clients. Join us to challenge yourself and accomplish work that matters. Here are the job details Position: Electrical Engineer Location: Fermont, CA (Onsite Work) Duration: 12+ Months Rate: $95/hr W2 EE System Design Position Experience: • Large scale system level design experience involving different subcomponents. • Cable and cable harness design • PCB design & layout experience preferred • RS232, Ethernet, Ethercat bus experience preferred • 208/408VAC, breakers, contactors and distribution box design preferred • Safety Certification, S22 preferred • 24VDC digital IO preferred • SAP/Product-Lifecycle-Management online documentation system Job Description: • Design and modify IO and power cables and PCBs. • Find component replacements and test obsolete/End of life components • Drive solutions to field problem reports. • Conduct design reviews when necessary • Check electrical drawings and schematics before production release • Work with mechanical and software engineers to solve field and/or new design problems • BOM (Bill of Material) structuring for new/updated parts • Online documentation in a Product-Lifecycle-Management system Requirements: • Min: BS in Electrical/Electronic Engineering • Must be motivated; job requires a “Sherlock Holmes attitude” to find the correct resource/tool owner or technical expert. • Must be self-directed/independent as well as able to work in a team • Good communication and presentation skills • Strong computer proficiency • Ability to handle multiple tasks and manage priorities • Schematic capture CAD experience; OrCAD preferred • BOM management software experience • Proficient in MS office products required. Note: This is not an embedded systems job. Droisys is an equal opportunity employer. We do not discriminate based on race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other characteristic protected by law. Droisys believes in diversity, inclusion, and belonging, and we are committed to fostering a diverse work environment.

Electrical Engineering Professional Associate About the Job Duration: This role is intended to be a contract-to-hire. Client Location: 2020 SW 4th Avenue, 3rd Floor, Portland, OR 97201 United States Work Type: Onsite Job: 23793 Qualifications: Bachelor's or Master of Science Degree in Electrical Engineering or Renewable Energy Engineering At least 5 years of Electrical Engineering Experience Engineer in Training (EIT) Special Qualifications: BIM lead, Revit Experience Ideally, you'll also have: Working knowledge of Revit or BIM software Professional Engineering License (PE) Preferred in the State of (____) Strong communication skills both verbal and written Strong analytical and problem-solving skills Forward thinking, eager to learn best practices, and contribute with innovative ideas Displayed ability to learn quickly and driven to broaden knowledge base Ability to collaborate and work effectively in a variety of teams, including multi-disciplinary teams Passionate about buildings and construction Responsibilities: Become part of our team as an Electrical Engineer who is excited about working on projects that enable the heart of our clients' business. Join us and you'll have the chance to work on projects including semiconductor manufacturing, data center facilities, and other state of the art manufacturing facilities. You'll be accountable for schedule and technical quality of assigned routine engineering tasks, as you gain familiarity with the client's expectations, scope, budget and schedule for assigned tasks, you'll effectively recognize and communicate scope and design changes promptly. You'll also provide on-site assistance during startup, coordinate work activities with other staff members and the discipline lead. Your multi-discipline, highly interactive team will produce installation details, motor control center single lines, electric room layouts, motor control elementaries, connection diagrams, cable schedules, control panel layouts and grounding, lighting, and power plans. About our Company DataSoft Technologies is a highly recognized provider of professional IT Consulting services in the US. Founded in 1994, DataSoft Technologies, Inc. provides staff augmentation services for Information Technology and Automotive Services. Our team member benefits include: Paid Holidays/Paid Time Off (PTO) Medical/Dental Insurance Vision Insurance Short Term/Long Term Disability Life Insurance 401 (K)

As an Engineering Technician, you'll assemble and maintain test systems, support vehicle engineering tests, and collaborate with engineers and technicians to ensure high-quality results. Responsibilities Wiring, low voltage (12v) Maintain and troubleshoot test equipment to minimize downtime. Assemble mechanical structures and prototype wiring per documentation. Perform light fabrication using machining, shop, and hand tools. Document faults, maintenance, and upgrades. Support vehicle tests such as powertrain durability, endurance, transmission abuse, and environmental systems. Transport vehicles and equipment; assist with test prep and driving on tracks and public roads. Communicate issues and provide feedback on equipment and test performance. Maintain a clean, safe workspace and follow safety regulations. Minimum Qualifications 3+ years of hands-on technical/wiring experience. Strong mechanical assembly and troubleshooting skills. Ability to lift 45 lbs and use hand tools. Excellent communication and organizational skills. Preferred Qualifications Experience with electrical harnesses and cable connections. Familiarity with hazardous material handling. Knowledge of CAN/LIN protocols. Experience with Jira, SharePoint, and Confluence. Background in vehicle systems-especially electric vehicles-or robotics. Experience with Advanced Driver Assistance Systems (ADAS) and thermal systems. Rate: $35-$40/hr

Job Title: Controls and Automation Engineer Employment Type: Full-Time, Direct Hire Shift: Second Shift | 1:00 PM - 10:00 PM CT | Typically 6 days/week Salary: $100,000-$120,000 annually + Overtime Eligible Education Requirement: Bachelor's Degree (Mandatory) No visa transfers or sponsorship available, no OPT/CPT/F1 visas Seeking locally based Texas candidates for this role! Job Summary We are seeking a skilled Controls and Automation Engineer to join our manufacturing team in Grand Prairie, TX. This role is responsible for designing, developing, and troubleshooting factory-based electrical control systems and automation equipment. The ideal candidate will have hands-on experience with PLCs, HMI design, and industrial automation systems. Key Responsibilities Design, develop, and troubleshoot electrical control systems and machinery. Program and support PLC-based hardware/software (e.g., Allen-Bradley). Test and maintain electronic equipment used in manufacturing and power transmission. Troubleshoot electrical issues on conveyor systems, motors, drives, and pumps. Use CAD and engineering software for design and documentation. Evaluate and improve existing systems for reliability and performance. Develop and modify operator interfaces and automation platforms. Ensure compliance with OSHA and NFPA-70E safety standards. Supervise and guide maintenance technicians as needed. Analyze production requirements and implement cost-effective solutions. Perform technical calculations for electrical and robotic systems. Manage project timelines, budgets, and quality standards. Support the build and validation of automation systems including pneumatics, servos, VFDs, relays, and robotic integration. Qualifications Bachelor's degree in Electrical/Electronic Engineering or related field. Minimum 2+ years of experience in Electrical Controls/System Engineering. Proficiency in ladder logic programming (Allen-Bradley: PLC5, SLC, ControlLogix 5000-5580). Experience with HMI design tools (FactoryTalk View, Ignition, Wonderware, LabVIEW). Familiarity with Ethernet/IP and basic networking. Knowledge of plant power distribution and motor control systems. Understanding of robotic programming and teach points. Preferred Skills Strong problem-solving and critical thinking abilities. Ability to work independently and in team environments. Excellent communication and multitasking skills. Proactive and resourceful in high-output settings. To Apply: Please send your resume to ********************

One of our clients which is having operations globally is looking a Hardware Test Engineer for an onsite role to Sunnyvale, CA. Please find the below job description and request you to share me your resume to ************************ Title: Hardware Test Engineer Location: Onsite to Sunnyvale, CA Duration: Full time with all the benefits Experience required: 5 + Years Description: 1) Board Testing experience in must using equipment like:- Oscilloscopes/DMM - digital multimeter 2) Candidate must have basic exposure to interfaces like :- I2C, SPI, I3C 3 ) Must have experience in basic EE testing terms like:- Current measurement / Power measurement / Voltage measurement / Signal measurement 4) Python is good to have but not mandatory 5) Degree: Flexible (ideal - BSEE or related field with 2+ years of experience) / (Associates will also work with 5+ years of experience in board testing)

CES/AWS is looking for a Controls Engineer for an Automotive Manufacturing client in Napoleon, OH. 💲 Pay Rate: $37.50 - $48.00 per hour (DOE) 🕒 Schedule: 2nd Shift | 4:00 PM - 12:00 AM | Monday-Friday Contract-to-Hire position About the Role We are seeking a Controls Engineer to join a leading manufacturing company in the automotive industry. This role is based at a high-volume assembly facility supporting well-known vehicle products. The ideal candidate will bring strong experience in controls engineering, troubleshooting, and process improvement within a fast-paced manufacturing environment. Responsibilities Review PLC logic and debug for proper function, error-proofing, and data collection. Lead root cause investigations and eliminate downtime issues. Participate in lean manufacturing initiatives (value-add, error-proof, visual factory, Kanban flow). Review and approve electrical/controls schematics, BOMs, and mechanical drawings. Co-develop inspection criteria, gage requirements, and control documentation. Support problem-solving activities (7 Step, Error-Proofing, Fishbone, 5 Why, etc.). Lead continuous improvement programs and cost savings initiatives (VA/VE, MCM). Develop PFMEAs, operator instructions, control plans, and process flow charts. Collaborate with quality and equipment vendors to ensure robust design, installation, and operation. Maintain a clean, safe, and organized work environment. Qualifications 3+ years of Controls Engineering experience in manufacturing/assembly. Strong electrical and mechanical troubleshooting skills. Proficiency with RSLogix 5000 and RSLinx (required). Experience with fastener torque systems (preferred). Familiarity with lift assists, pneumatics, barcode scanners, RFID readers, and safety equipment. Skilled in PFMEA development, control documentation, and process flow design. Working knowledge of gage and layout procedures. Proficiency with MS Office Suite, AutoCAD, and VisView. Strong organizational, communication, leadership, and problem-solving skills. Ability to work extended hours, weekends, and support multiple shifts as needed. 🔹 This is a great opportunity to grow your career in a well-established automotive manufacturing environment while contributing to the success of high-profile product lines. If interested please apply or send your resume to **********************************