Quality Control Technician jobs at Rinker Materials West LLC - 802 jobs

Job Title: Lab Technician- 2nd shift Type: 12 Months Contract Pay range: $40.00-$50.00 per hour on W2 Schedule: 12:00 PM -10:00 PM We are seeking a highly skilled technician with at least 5 years of hands-on experience in circuit board rework and electronic hardware support. The ideal candidate will be comfortable in an engineering lab setting, where they will be responsible for reworking extremely complicated PCBs that utilize state-of-the-art components. You will work closely with engineering teams to repair, modify, and validate advanced electronic assemblies. In this role, you will also be at ease running and maintaining basic lab equipment, such as multimeters, oscilloscopes, function generators, and solder/desolder stations. Additionally, you will exercise various software commands and scripts to perform diagnostic tests on our products, supporting the engineering team in troubleshooting and validation tasks. Success in this position requires careful attention to detail, the ability to follow precise procedures, and clear communication of findings. You will play a key role in ensuring the performance and reliability of our cutting-edge hardware solutions while maintaining an organized and efficient lab environment. Key Responsibilities and Requirements: Work independently in a fast-paced engineering lab environment, demonstrating strong self-motivation and time management skills. Rework and repair extremely complicated PCBs utilizing state-of-the-art components, ensuring high quality and reliability. Operate and maintain basic lab equipment (such as oscilloscopes, multimeters, and soldering stations) and execute software commands to perform product tests. Collaborate effectively with remote engineering teams, communicating findings and progress clearly through digital platforms. Support the engineering team in troubleshooting, validation, and documentation of hardware issues and solutions. Maintain an organized and efficient lab environment, adhering to safety and procedural standards. Job is 100% in-person; candidates must be available to work onsite at our engineering facility, 40 hours per week, between the hours of 12-10PM. Must Have: 5 years of hands-on experience in circuit board rework and electronic hardware support Experienced engineering lab setting Operate and maintain basic lab equipment (such as oscilloscopes, multimeters, and soldering stations)

What you'll do: Requires knowledge of industry specific codes and standards. CWI-Certification Strongly Preferred. The inspector will be required to interpret and evaluate inspection results for welding fit-up and filler metal placement with respect to applicable codes, standards, and specifications, be able to set up and calibrate all testing equipment Use visual inspection techniques (VT) as well as Ultrasonic testing (UT) and Magnetic Particle Testing (MT) to perform non-destructive tests to identify errors or defects in product. Oversee welder qualification tests and evaluate welder performance. Accurately complete and maintain all required records. Follow all safety rules and practices. Perform other duties as assigned. Overtime is expected and required to meet production goals.

Performs any combination of the essential duties and responsibilities of quality control at manufacturing facility in Dixon, CA. Successful candidates will be required to participate in a pre-employment drug screen and random drug screening per our Drug Free Workplace policy. Dependability for work schedule is crucial. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Inspects cast floats, float assemblies, and metal fabrications, hardware components, and lumber; * Inspects the casting process per drawing requirements; * Performs concrete tests per ACI / PCI and customer specifications; * Scans production and inspection documents; * Conducts safety tasks and inspections as required by The BMI Safety Program; and * Documents and records QC activities. * Performs other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or equivalent required. Requires knowledge of or ability to learn the characteristics of concrete float fabrication with 12 months of experience working with concrete and/or prior inspection. Requires one year of experience in Quality Control. CERTIFICATES, LICENSES, REGISTRATIONS: ACI concrete field testing tech Grade 1 Certification. Possess or ability to obtain PCI Quality Control Technician Levels 1 and 2 within 12months of hire. Ability to read production drawings. COMPUTER SKILLS: To perform this job successfully, an individual should be proficient with MS Word, MS Excel, and MS Outlook. Must be able to use a document scanner.

Overview Salary: $51,000 - $64,000 Annually Summary: The Quality Control Technician will implement and comply with quality assurance methods and procedures to ensure products and materials are produced in accordance with specifications in a safe and efficient manner. Principal Duties and Responsibilities: Quality Control Analysis: • Conduct tests and inspect concrete to evaluate quality or conformance to specifications • Sample and evaluate quality of materials related to concrete • Monitor equipment operation to ensure that concrete is within tolerance • Record inspection or test data, such as slump, air content, unit weight, temperature, or moisture content • Input test data into company quality control software • Test hardened concrete for compressive strength • Input strength results into company quality control software • Analyze, evaluate, and resolve customer concerns involving specific conditions, situations, quantities, and other influences associated with product • Manage and maintain quality control software for assigned area Production and processing: • Perform aggregates and batch plants tests including aggregate gradation and moisture tests for State and spec projects as required Communication Skills: • Provide information to supervisors, co-workers, and contractors via phone, e-mail or in person • Effectively communicate with dispatch office to successfully ship and test concrete Global Responsibilities: • Regular attendance and physical presence at work is an essential function of this position • This job may require additional duties not listed above and the employee may be asked to perform those duties to meet business needs Qualifications: Education/Specialized Knowledge/Professional Certifications: • High School Diploma or equivalent required • Bachelor's degree in related field preferred • ACI Level 1, NICET Certified or NRMCA Short Course completion on aggregates or concrete are required • Valid driver's license required • IDOT PCC Level I or WDOT PCCTEC I certification(s) or higher are preferred(IL South, IL North, and WI region only) • Knowledge of raw materials, production processes and quality control are preferred Experience: • Experience in related field preferred Skills/Abilities: • Able to read, write, and speak English preferred • Able to operate a smart phone/device • Proficient in Microsoft Office Suite Working Conditions: • Operation within a fast-paced environment • Exposed to moving mechanical parts, vehicles, heavy construction equipment, toxic or caustic chemicals, and outside weather conditions • Noise level is usually moderate, but can be high and requires personal hearing protection on occasion at job sites, plants and laboratories • Must be able to work through stressful situations while maintaining professionalism and composure • Local travel required Physical Requirements: • Regularly required to talk or hear; frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms • Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl • Must be able to stand and move about job sites with uneven and unpaved ground while managing concrete delivery onsite • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus • Must be able to frequently bend in order to obtain samples from stockpiles or ground, climb ladders with buckets of admixtures, and push wheelbarrows of concrete • Must be able to operate buttons, levers, and other controls located on various equipment • Must be able to work long and flexible hours as necessary • Must be able to maneuver in and around our plants, yards and jobsites as necessary • Lift/Carry up to 55pounds frequently • Lift up to 100 pounds occasionally Benefits Information: At Ozinga, we care about the well-being of our team members both in and out of the workplace. That's why we're proud to offer a comprehensive benefits package designed to support your health, financial security, and overall quality of life. Our benefits include: • Medical, Dental, and Vision Insurance - Protecting your health and providing peace of mind. • Retirement Plan Options - Helping you build a secure future. • Voluntary Benefits - Helping you to cover unexpected expenses. • Work-Life Balance - Supporting flexibility so you can thrive in every area of your life. • Employee Assistance Program - Offering confidential support for personal and professional challenges. • Wellness Program - Promoting a healthy lifestyle through resources and incentives. We believe that when our co-workers feel their best, they can do their best. Join us and experience the difference of working for a company that values you! Ozinga is an Equal Opportunity Employer. We consider applications for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, sexual orientation, citizenship status, genetic information, or any other legally protected status.

Anderson Columbia Co., Inc. accepting resumes for a Quality Control Field Technician. QC Field Earthworks Technician will be responsible for performing Quality Control Nuclear Density tests in soils and base materials. Also, will be recording test results in the Earthwork Records System, or Density Log Book. As a Field Concrete Technician, responsibilities include performing Slump and Air Content tests, as well as Concrete yield tests and making test cylinders for strength. Must be a minimum of 18 years old with a Valid Driver's License . Must have FDOT Certifications in Earthworks and Concrete Must have a High School Diploma You will receive a confirmation email after you submit your resume profile. DFW / EOE Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Overview Summary: The Quality Control Technician will implement and comply with quality assurance methods and procedures to ensure products and materials are produced in accordance with specifications in a safe and efficient manner. Principal Duties and Responsibilities: Quality Control Analysis: • Conduct tests and inspect concrete to evaluate quality or conformance to specifications • Sample and evaluate quality of materials related to concrete • Monitor equipment operation to ensure that concrete is within tolerance • Record inspection or test data, such as slump, air content, unit weight, temperature, or moisture content • Input test data into company quality control software • Test hardened concrete for compressive strength • Input strength results into company quality control software • Analyze, evaluate, and resolve customer concerns involving specific conditions, situations, quantities, and other influences associated with product • Manage and maintain quality control software for assigned area Production and processing: • Perform aggregates and batch plants tests including aggregate gradation and moisture tests for State and spec projects as required Communication Skills: • Provide information to supervisors, co-workers, and contractors via phone, e-mail or in person • Effectively communicate with dispatch office to successfully ship and test concrete Global Responsibilities: • Regular attendance and physical presence at work is an essential function of this position • This job may require additional duties not listed above and the employee may be asked to perform those duties to meet business needs Qualifications: Education/Specialized Knowledge/Professional Certifications: • High School Diploma or equivalent required • Bachelor's degree in related field preferred • ACI Level 1, NICET Certified or NRMCA Short Course completion on aggregates or concrete are required • Valid driver's license required •I DOT PCC Level I or WDOT PCCTEC I certification(s) or higher are preferred(IL South, IL North, and WI region only) • Knowledge of raw materials, production processes and quality control are preferred Experience: • Experience in related field preferred Skills/Abilities: • Able to read, write, and speak English preferred • Able to operate a smart phone/device • Proficient in Microsoft Office Suite Working Conditions: • Operation within a fast-paced environment • Exposed to moving mechanical parts, vehicles, heavy construction equipment, toxic or caustic chemicals, and outside weather conditions • Noise level is usually moderate, but can be high and requires personal hearing protection on occasion at job sites, plants and laboratories • Must be able to work through stressful situations while maintaining professionalism and composure • Local travel required Physical Requirements: • Regularly required to talk or hear; frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms • Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl • Must be able to stand and move about job sites with uneven and unpaved ground while managing concrete delivery onsite • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus • Must be able to frequently bend in order to obtain samples from stockpiles or ground, climb ladders with buckets of admixtures, and push wheelbarrows of concrete • Must be able to operate buttons, levers, and other controls located on various equipment • Must be able to work long and flexible hours as necessary • Must be able to maneuver in and around our plants, yards and jobsites as necessary • Lift/Carry up to 55pounds frequently • Lift up to 100 pounds occasionally Ozinga is an Equal Opportunity Employer. We consider applications for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, sexual orientation, citizenship status, genetic information, or any other legally protected status.

Ro is a direct-to-patient healthcare company with a mission of helping patients achieve their health goals by delivering the easiest, most effective care possible. Ro is the only company to offer nationwide telehealth, labs, and pharmacy services. This is enabled by Ro's vertically integrated platform that helps patients achieve their goals through a convenient, end-to-end healthcare experience spanning from diagnosis, to delivery of medication, to ongoing care. Since 2017, Ro has helped millions of patients, including one in every county in the United States, and in 98% of primary care deserts. Ro has been recognized as a Fortune Best Workplace in New York and Health Care for four consecutive years (2021-2024). In 2023, Ro was also named Best Workplace for Parents for the third year in a row. In 2022, Ro was listed as a CNBC Disruptor 50. As a Quality Control (QC) Pharmacy Technician, you will be the on-site subject matter expert for quality control activities at our 503a compounding pharmacy located in Boynton Beach, FL. This role is responsible for quality oversight activities that ensure compounded processes are well documented and that products are handled and tested per facility SOPs. This position will be responsible for record review, raw material receipt and testing, product retains, product sampling and testing, lot release, and environmental monitoring. You will partner closely with pharmacy operations to ensure the pharmacy location maintains a high level of quality and compliance. This role will report to the Manager, Corporate Quality - Pharmacy on the Clinical team.What You'll Do Support QC oversight for compounding operations. Assist with development, support implementation, and maintain SOPs, Forms, Work Instructions and other required controlled documents. Own the finished product retain program, ensuring a sample of each compounded lot is retained per SOP. Conduct reviews of cleaning logs, compounding records, and other controlled records created throughout the facility. Assist in root cause investigations and continuous quality improvement initiatives. Assist in the execution of training on quality topics, functioning as the on-site SME for quality. Provide Pharmacy Compliance with requests arising from pharmacy inspections. Ensure the highest quality and cleanliness of the facility and equipment, leading our environmental monitoring program. Conduct Quality Assurance checks on relevant product batches according to predefined guidelines, reviewing final test results to perform lot release. What You'll Bring to the Team Bachelor's degree in any science discipline, preferred. Current pharmacy technician license in Florida or the ability to obtain pharmacy technician licensure, preferred. At least 3 years experience working in a manufacturing production environment or a high volume compounding pharmacy required. Experience working in a cGMP or 503B facility where PPE, cleanliness, and sterile sampling techniques are part of daily routine, required. Experience identifying need for and assisting in the creation of SOPs and other controlled documents. Knowledge of environmental monitoring in cGMP environments. Experience with Good Documentation Practices, preferred. Experience training others, preferred. Strong attention to detail and ability to think strategically and tactically. Outstanding written and verbal communication skills. Irrational passion for building the future of healthcare with an emphasis on quality processes to drive successful patient outcomes. We've Got You Covered Full medical, dental, and vision insurance + OneMedical membership Healthcare and Dependent Care FSA 401(k) with company match Flexible PTO Wellbeing + Learning & Growth reimbursements Paid parental leave + Fertility benefits Pet insurance Student loan refinancing Virtual resources for mindfulness, counseling, and fitness We welcome qualified candidates of all races, creeds, genders, and sexuality to apply. The target hourly rate for this position ranges from $30.43 to $36.78, in addition to a competitive equity and benefits package (as applicable). When determining compensation, we analyze and carefully consider several factors, including location, job-related knowledge, skills and experience. These considerations may cause your compensation to vary. Ro recognizes the power of in-person collaboration, while supporting the flexibility to work anywhere in the United States. For our Ro'ers in the tri-state (NY) area, you will join us at HQ on Tuesdays and Thursdays. For those outside of the tri-state area, you will be able to join in-person collaborations throughout the year (i.e., during team on-sites). At Ro, we believe that our diverse perspectives are our biggest strengths - and that embracing them will create real change in healthcare. As an equal opportunity employer, we provide equal opportunity in all aspects of employment, including recruiting, hiring, compensation, training and promotion, termination, and any other terms and conditions of employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, gender expression, familial status, age, disability and/or any other legally protected classification protected by federal, state, or local law. See our California Privacy Policy here.

Job DescriptionRo is a direct-to-patient healthcare company with a mission of helping patients achieve their health goals by delivering the easiest, most effective care possible. Ro is the only company to offer nationwide telehealth, labs, and pharmacy services. This is enabled by Ro's vertically integrated platform that helps patients achieve their goals through a convenient, end-to-end healthcare experience spanning from diagnosis, to delivery of medication, to ongoing care. Since 2017, Ro has helped millions of patients, including one in every county in the United States, and in 98% of primary care deserts. Ro has been recognized as a Fortune Best Workplace in New York and Health Care for four consecutive years (2021-2024). In 2023, Ro was also named Best Workplace for Parents for the third year in a row. In 2022, Ro was listed as a CNBC Disruptor 50. As a Quality Control (QC) Pharmacy Technician, you will be the on-site subject matter expert for quality control activities at our 503a compounding pharmacy located in Boynton Beach, FL. This role is responsible for quality oversight activities that ensure compounded processes are well documented and that products are handled and tested per facility SOPs. This position will be responsible for record review, raw material receipt and testing, product retains, product sampling and testing, lot release, and environmental monitoring. You will partner closely with pharmacy operations to ensure the pharmacy location maintains a high level of quality and compliance. This role will report to the Manager, Corporate Quality - Pharmacy on the Clinical team.What You'll Do Support QC oversight for compounding operations. Assist with development, support implementation, and maintain SOPs, Forms, Work Instructions and other required controlled documents. Own the finished product retain program, ensuring a sample of each compounded lot is retained per SOP. Conduct reviews of cleaning logs, compounding records, and other controlled records created throughout the facility. Assist in root cause investigations and continuous quality improvement initiatives. Assist in the execution of training on quality topics, functioning as the on-site SME for quality. Provide Pharmacy Compliance with requests arising from pharmacy inspections. Ensure the highest quality and cleanliness of the facility and equipment, leading our environmental monitoring program. Conduct Quality Assurance checks on relevant product batches according to predefined guidelines, reviewing final test results to perform lot release. What You'll Bring to the Team Bachelor's degree in any science discipline, preferred. Current pharmacy technician license in Florida or the ability to obtain pharmacy technician licensure, preferred. At least 3 years experience working in a manufacturing production environment or a high volume compounding pharmacy required. Experience working in a cGMP or 503B facility where PPE, cleanliness, and sterile sampling techniques are part of daily routine, required. Experience identifying need for and assisting in the creation of SOPs and other controlled documents. Knowledge of environmental monitoring in cGMP environments. Experience with Good Documentation Practices, preferred. Experience training others, preferred. Strong attention to detail and ability to think strategically and tactically. Outstanding written and verbal communication skills. Irrational passion for building the future of healthcare with an emphasis on quality processes to drive successful patient outcomes. We've Got You Covered Full medical, dental, and vision insurance + OneMedical membership Healthcare and Dependent Care FSA 401(k) with company match Flexible PTO Wellbeing + Learning & Growth reimbursements Paid parental leave + Fertility benefits Pet insurance Student loan refinancing Virtual resources for mindfulness, counseling, and fitness We welcome qualified candidates of all races, creeds, genders, and sexuality to apply. The target hourly rate for this position ranges from $30.43 to $36.78, in addition to a competitive equity and benefits package (as applicable). When determining compensation, we analyze and carefully consider several factors, including location, job-related knowledge, skills and experience. These considerations may cause your compensation to vary. Ro recognizes the power of in-person collaboration, while supporting the flexibility to work anywhere in the United States. For our Ro'ers in the tri-state (NY) area, you will join us at HQ on Tuesdays and Thursdays. For those outside of the tri-state area, you will be able to join in-person collaborations throughout the year (i.e., during team on-sites). At Ro, we believe that our diverse perspectives are our biggest strengths - and that embracing them will create real change in healthcare. As an equal opportunity employer, we provide equal opportunity in all aspects of employment, including recruiting, hiring, compensation, training and promotion, termination, and any other terms and conditions of employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, gender expression, familial status, age, disability and/or any other legally protected classification protected by federal, state, or local law. See our California Privacy Policy here.

Since 1958, Anderson Columbia has been an industry leader in paving and road building, making smooth stomping grounds for vehicles of all kinds. We strive to construct roads from the highest quality materials and apply ourselves to ensure the job is done right. From small backstreets to congested highways, we perform jobs of all proportions and create pavement in a way that makes the ride enjoyable. We pride ourselves on being one of the Largest Construction & Aggregate Producing Contractors in Florida. Our sense of professionalism paired with our teams of highly-trained personnel allows us to be successful at every job we employ. Anderson Columbia doesn't just hire employees into a company, we hire people into our family; after all, people are our greatest asset. If you appreciate the feeling of sweat on your forehead, the sense of accomplishment at the end of a long day, or the pride in calloused hands, Anderson Columbia may have a place for you. Anderson Columbia of Texas New Braunfels quarry We currently produce 1 to 1.9 million tons per year of aggregates. Monday - Friday ( Some Saturdays ) Day Shift - 6:00am - 4:00pm Pay Rate - Starting at $19.75/Hour DOE* Work Environment Role operates in a manufacturing environment with moving mechanical equipment, inclement weather, heat, humidity, elevated noise levels, and dusty conditions. Job Description The Quality Control Technician is responsible for taking samples, observing and testing a variety of materials from all stages of the production process, using physical, and instrumental techniques. Evaluating the test results against internal and external specifications. The Quality Control Technician is also responsible for reporting noncompliance and taking action to preserve the integrity of our products. Sample and test raw materials for specification compliance. Validate that the proper components and materials are used. Calibrate, clean, and maintain production tools and testing equipment. Record test results and report them to management. Perform daily equipment inspections, as well as identify and assist in correcting unsafe conditions. Collaborate with plant employees and build and maintain relationships with customers. Build and maintain relationships with plant employees and customers. Accurately sample and perform physical properties tests on all types of raw materials, in-process, and finished products following established laboratory guidelines, SOP, or consensus standards. Effectively document, interpret and communicate analysis results within the context of the production facilities to maintain product quality. Assist with tasks in other departments as needed. Monitor test results of raw materials, in-process and finished goods for trends and adherence to specifications. Report noncompliance immediately to affected departments and take action to maintain compliance with specifications when necessary. Follow the required industrial hygiene, legislative and plant requirements. Familiar with the operation, safety features, and manuals of all laboratory instruments, machines, and tools. Maintain housekeeping of sampling locations. Responsible for minor repairs on laboratory equipment, facilities, and preventative maintenance. Ensure a workplace culture of safety through workplace inspection and watching out for others. Complete appropriate training to run equipment in the most efficient and sustainable manner. Maintain chemical solutions, laboratory instruments, standardization or calibration schedule, and a clean work environment. Essential Experience and Skills State DOT certification or the capability and drive to obtain quickly upon hire. Strong basic math skills Proven record of punctuality, excellent attendance, and dependability Good computer literacy - ability to learn computerized analysis equipment and proficiency with Microsoft Office Ability and willingness to work a flexible schedule including different shifts and overtime as needed. High School Diploma or GED Preferred Experience and Skills College degree or technical training/certifications Quality Control experience Stone quarry or related industry experience Job Qualifications: A qualified candidate must have: Have at least three years of Quality Control experience in a manufacturing or mining plant. Must have a high school diploma or GED. Must have steady employment. Must have clean and valid drivers' licenses. Must be able to work outside in severe weather conditions as well as exposure to high temperatures, noise, and dust. Excellent communication skills and problem-solving skills. Self-motivated and must be able to work independently with integrity. Ability to complete required paperwork and mathematical assignments in a scientific format and in the required time frame. Knowledge of basic computer skills. Demonstrated skills entering and retrieving data in a Microsoft based computer system. Must be a safe employee, excellent attendance, and outstanding quality of work. Must be able to work at heights of 75 feet, confined spaces, climbing ladders or stairs, and accessing tunnels. Must be able to pass background check. Must be able to pass pre-employment and random drug test while employed. Must pass pre-employment physical. Must be able to lift 75 pounds or more. Must be able to work rotating shift work if required. Rotating days of week and rotating between days and nights if required. Must be ability to read, write, and interpret documents such as safety rules, standard operating procedures, maintenance instructions, and procedural manuals. Must be able to perform basic mathematical computations. Must have a telephone and be open to call-outs. Able to work any day of the week. Valid and Clean Driver's license Ability to pass random drug test. Able to work either days or nights. Able to work 12-hour shifts. Able to pass all required certifications for test procedures required in a 4 to 6-month period after being hired. Benefit Packages available after 3 months. Healthcare, Dental, Eye, Life Insurance, paid holidays, vacation. 401 k after 6 months, with company match program. Equal Opportunity Employer Email address is required to submit resume. **You will receive a confirmation email once you submit your resume. ** DFW / EOE DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Since 1958, Anderson Columbia has been an industry leader in paving and road building, making smooth stomping grounds for vehicles of all kinds. We strive to construct roads from the highest quality materials and apply ourselves to ensure the job is done right. From small backstreets to congested highways, we perform jobs of all proportions and create pavement in a way that makes the ride enjoyable. We pride ourselves on being one of the Largest Construction & Aggregate Producing Contractors in Florida. Our sense of professionalism paired with our teams of highly-trained personnel allows us to be successful at every job we employ. Anderson Columbia doesn't just hire employees into a company, we hire people into our family; after all, people are our greatest asset. If you appreciate the feeling of sweat on your forehead, the sense of accomplishment at the end of a long day, or the pride in calloused hands, Anderson Columbia may have a place for you. Anderson Columbia of Texas New Braunfels quarry We currently produce 1 to 1.9 million tons per year of aggregates. Monday - Friday ( Some Saturdays ) Day Shift - 6:00am - 4:00pm Pay Rate - Starting at $19.75/Hour DOE* Work Environment * Role operates in a manufacturing environment with moving mechanical equipment, inclement weather, heat, humidity, elevated noise levels, and dusty conditions. Job Description The Quality Control Technician is responsible for taking samples, observing and testing a variety of materials from all stages of the production process, using physical, and instrumental techniques. Evaluating the test results against internal and external specifications. The Quality Control Technician is also responsible for reporting noncompliance and taking action to preserve the integrity of our products. * Sample and test raw materials for specification compliance. * Validate that the proper components and materials are used. * Calibrate, clean, and maintain production tools and testing equipment. * Record test results and report them to management. * Perform daily equipment inspections, as well as identify and assist in correcting unsafe conditions. * Collaborate with plant employees and build and maintain relationships with customers. * Build and maintain relationships with plant employees and customers. * Accurately sample and perform physical properties tests on all types of raw materials, in-process, and finished products following established laboratory guidelines, SOP, or consensus standards. * Effectively document, interpret and communicate analysis results within the context of the production facilities to maintain product quality. * Assist with tasks in other departments as needed. * Monitor test results of raw materials, in-process and finished goods for trends and adherence to specifications. * Report noncompliance immediately to affected departments and take action to maintain compliance with specifications when necessary. * Follow the required industrial hygiene, legislative and plant requirements. * Familiar with the operation, safety features, and manuals of all laboratory instruments, machines, and tools. * Maintain housekeeping of sampling locations. * Responsible for minor repairs on laboratory equipment, facilities, and preventative maintenance. * Ensure a workplace culture of safety through workplace inspection and watching out for others. * Complete appropriate training to run equipment in the most efficient and sustainable manner. * Maintain chemical solutions, laboratory instruments, standardization or calibration schedule, and a clean work environment. Essential Experience and Skills * State DOT certification or the capability and drive to obtain quickly upon hire. * Strong basic math skills * Proven record of punctuality, excellent attendance, and dependability * Good computer literacy - ability to learn computerized analysis equipment and proficiency with Microsoft Office * Ability and willingness to work a flexible schedule including different shifts and overtime as needed. * High School Diploma or GED Preferred Experience and Skills * College degree or technical training/certifications * Quality Control experience * Stone quarry or related industry experience Job Qualifications: * A qualified candidate must have: * Have at least three years of Quality Control experience in a manufacturing or mining plant. * Must have a high school diploma or GED. * Must have steady employment. * Must have clean and valid drivers' licenses. * Must be able to work outside in severe weather conditions as well as exposure to high temperatures, noise, and dust. * Excellent communication skills and problem-solving skills. * Self-motivated and must be able to work independently with integrity. * Ability to complete required paperwork and mathematical assignments in a scientific format and in the required time frame. * Knowledge of basic computer skills. Demonstrated skills entering and retrieving data in a Microsoft based computer system. * Must be a safe employee, excellent attendance, and outstanding quality of work. * Must be able to work at heights of 75 feet, confined spaces, climbing ladders or stairs, and accessing tunnels. * Must be able to pass background check. * Must be able to pass pre-employment and random drug test while employed. Must pass pre-employment physical. * Must be able to lift 75 pounds or more. * Must be able to work rotating shift work if required. Rotating days of week and rotating between days and nights if required. * Must be ability to read, write, and interpret documents such as safety rules, standard operating procedures, maintenance instructions, and procedural manuals. * Must be able to perform basic mathematical computations. * Must have a telephone and be open to call-outs. * Able to work any day of the week. * Valid and Clean Driver's license * Ability to pass random drug test. * Able to work either days or nights. * Able to work 12-hour shifts. * Able to pass all required certifications for test procedures required in a 4 to 6-month period after being hired. Benefit Packages available after 3 months. * Healthcare, Dental, Eye, Life Insurance, paid holidays, vacation. * 401 k after 6 months, with company match program. Equal Opportunity Employer Email address is required to submit resume. You will receive a confirmation email once you submit your resume. DFW / EOE DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Quanex is looking for a Quality Technician - 2nd shift to join our team located in Owatonna, Minnesota. This position utilizes appropriate experience and technical training, under the direction of the Quality Manager, to provide quality support throughout all processes included in the Shop Floor Operations. The hours are Monday - Thursday 3:30pm - 1:30am. We Offer You! * Competitive Salary * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Various Work Schedules * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment * Employee Stock Purchase Plan * Dynamic Culture & People - just to name a few! What's attractive about the (Quality Technician) position? * Team-Oriented Environment * Ability to Make an Impact * Drive Improvement What Success Looks Like: * Work closely with Production, Engineering, and Management to process nonconforming materials. * Monitor Corrective Action Reports to ensure adequate progress is made in achieving corrective actions. * Verify the effectiveness of the corrective actions. * Audit company processes to ensure compliance with established standards. * Collect and compile data, analyze data, and complete various quality reports for internal use and upon customer request. * Evaluate and recommend changes to process specifications and product specifications based on defect data and customer complaint information to ensure consistency and efficiency. * Train employees on the Quanex quality system, including documentation, procedures, measurement techniques, and appropriate sampling frequencies. What You Bring: * Must be reliable, cooperative, and a self-starter. * Knowledgeable of measurement tools and techniques. * Microsoft Office Suite, Word, Excel, PowerPoint, Outlook. * Knowledge of ERP systems; SAP. * Ability to read and understand; BOMs, part drawings, control plans, and other production related documentation. The hourly pay rate for this position is $20.25 per hour plus $1.00 per hour for shift differential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com.

At Nox Group, we are dedicated to humanizing construction! Our enterprise owns and operates Corbins, RMCI, Nox Innovations, and Construction Labels. Our teammates, partners, and customers can expect that we genuinely care to serve them and look out for their best interests. As one of the fastest-growing industrial construction enterprises in the US and an industry leader in data centers, manufacturing, semiconductor, and water/wastewater treatment facilities, we continually look for people who are excited about personal growth and can contribute to our mission of being empowered thought leaders boldly changing the construction industry. We are currently seeking a Quality Technician to support our QAQC Department team in Reno, Nevada. As a Quality Technician, you will play an essential role in ensuring our installations comply with National and City codes, customer design specifications, and Corbins' expectation of “First Class Work”. You will be supporting the most challenging and exciting projects in the Southwest, including commercial, industrial, mission-critical and water/wastewater treatment facilities. Responsibilities Develop an understanding of the electrical project scope, quality requirements, quality plan, and quality documents pertaining to the assigned scope of work including applicable codes and standards. Coordinate with operations to schedule and perform quality inspections and tests to maintain production goals. Prepare inspection/test reports and maintain the quality files related to area of responsibility. Verify inspection and test compliance with applicable contract documents, codes, and standards. Correctly interpret and utilize codes and industry standards to determine compliance of the work. Assist the project team with completion of required test documentation. Organize quality documents and store per the company and project document management procedures. Identify, report, and correct nonconforming work in accordance with the company quality standards and the Project Quality Plan. Perform receiving inspection of permanent materials and plant equipment for project requirements as needed. Be involved in and provide quality input to task planning meetings. Examine/inspect field conditions and identify problems, inaccuracies, and cost saving measures that arise or that may be encountered. Take corrective actions as needed. Identify safety hazards you or other employees may be subject to and take all necessary corrective actions to eliminate or minimize hazards. Understand and respond appropriately to all safety hazards and warning devices (i.e. back-up alarms, smell of smoke, different colored warning tags, warning sirens) Understand and implement lockout/tagout procedures in safe manner. Qualifications 5+ years working in the industrial electrical industry. Experience maintaining effective communications (both orally and written) with supervisor, coworkers, and the project management team. Experience developing strong working relationship with supervisor, coworkers, and the project management team. Electrical code and standards knowledge Strong attention to detail and follow-through. Proficient in Microsoft Office software (Word, Excel, Outlook) Must be a self-starter, be organized, and have good interpersonal skills. Ability to complete tasks with minimal supervision. Ability to lift up to fifty pounds, unassisted, as required. Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary. Able to work a 40-hour work week, with overtime and off-hour shifts as required. Ability for stand for long periods of time in one place. Ability to walk jobsites throughout the day. Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location. Education/Certifications High school diploma or equivalent. Trade Certificate or college degree in education preferred or equivalent experience in construction training and development. Safety Level This is a safety sensitive position, and all applicable policies including drug test and background check will apply. The inherent responsibilities of your role may include physical working conditions. In order to safely and successfully perform job duties you must be able to: Potentially lift up to 50 pounds Potentially need to do repeated pushing, pulling, carrying, reaching (or working above shoulder), walking, standing, sitting, stooping, kneeling, bending, and climbing Potentially operate a motor vehicle, crane, tractor, etc. We reserve the right to continually monitor your ability to safely and successfully complete these inherent physical responsibilities and take action as deemed appropriate in accordance to the Americans with Disability Act (ADA) It has been and continues to be the long-standing policy of any Nox Group operating company to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. In addition to federal law requirements, Nox Group and all of its subsidiaries comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description About Us At Tate we are passionate about everything we do. As an independent brand operating within Kingspan Group, a global plc group of companies, Tate has been recognized worldwide as an industry leader in the development and manufacture of data center infrastructure solutions and commercial office raised access floors, for over 60 years. With revenues of over $600m and growing, Tate plays a pivotal role in offering expertise in cutting edge design engineering to craft solutions, by working collaboratively with clients as a trusted partner. Tate continues to grow and expand, operating multiple manufacturing and commercial sites across the US, Europe, the Middle East, Asia, and Australia. We are excited about our fresh, dynamic, and inclusive team of experts working on new innovations and forward-thinking designs, as we remain a market leading player within our industry. We continue to invest heavily in the best available manufacturing tools and equipment needed to adhere to Tate's world class standards and in keeping with our Planet Passionate sustainability strategy, our focus is on having minimal climate impact. We are excited to potentially welcome you as part of our team as we continue to grow on a worldwide scale. About the Role The Quality Technician 1 is responsible for quality inspection for all products to ensure they conform to all applicable company and quality standards. This position will test products after, in process, and in final stages to ensure quality levels are met. Note: This position is for 3rd Shift. Hours for this role are Sunday-Thursday 10pm-630am What You'll Do · Ensures all test equipment is properly maintained and calibrated · Performs routine & job specific load performance tests to ensure compliance with published specs. · Performs incoming inspections on products received from vendor. · Has a working knowledge of all equipment and machinery within the facility. · Performs daily in process quality audits on products on production floor. · Performs testing needed for qualifications of new or revised products. · Maintains updated certified testing reports on standard products. · Assists with continuous improvement of product and manufacturing processes to improve quality, reduce costs, and ensure product quality objectives are met. · As assigned by supervisor, visits job sites to identify problems and recommends solutions. · Maintains good housekeeping and follow established safety procedures. · Performs other duties as assigned or directed by Team Leader/Supervisor. · Follows all policies, procedures, and work instructions including Employee Handbook, Standard Operating Procedures (SOPs), Manufacturing Operating Procedures (MOPs), Job Safety Analysis (JSAs), and Safety Manual. · Maintains awareness of individual contribution to and impact of the quality, safety, environmental, and product compliance policies and activities; reports all quality issues, unsafe acts, and unsafe conditions to the proper personnel. Additional Expectations Remain compliant with the Code of Conduct and Policies which includes the Kingspan Group Compliance Policy. Ensure that all duties related to product compliance are adhered to in accordance with the Product Compliance Policy, Laws, Regulations, and market demands. Responsible for all tasks to achieve compliance goals and demands of the Compliance Management System. Must raise concerns related to the Compliance Management System to their supervisor, manager, or any member of the Leadership Team, or through the confidential whistle blower service. What You'll Bring High school diploma or GED; or equivalent experience. Must be able to lift up to 50 lbs. unassisted. Must be able to stand, walk, bend, stoop or crouch for at least an 8-hour shift. Must be computer literate, including proficiency with Microsoft Office Products. Ability to use various tools and measuring instruments such as calipers, micrometers, tape measures, dial indicators, feeler gauges, etc. and verify all test equipment is in calibration and maintained in good working order. Strong shop-floor orientation. Knowledge of aluminum cutting and milling operation is a plus. Must be able to work in a fast-paced working environment with accuracy and integrity. Strong written and verbal communication skills. Detail-oriented. Three (3) plus years manufacturing experience. What You'll Get Pay range: $22.45 USD to $26.57 USD per hour. Career Scope and Advancement: As we grow, new positions and career opportunities arise, offering accelerated paths for the right candidates, locally and globally. World of Wellness Philosophy: We empower you to take charge of your health and well-being. You'll have access to a wide range of medical, dental, and vision benefits, along with personalized guidance from a “Health Advocate.” We also offer other supplemental options, including 401k, legal, disability, and theft insurance, to ensure your financial wellness. Corporate Social Responsibility: Through Planet Passionate we are determined to reduce our manufacturing carbon (CO2e) emissions to as close to zero as technically possible, together with halving carbon intensity in our primary supply chain. We are very involved in our community, and you will have ample opportunities to support us in creating a better world. Skills Development: Given the dynamic pace of our business and a strong collaborative environment, your new role will be diverse and multifaceted - allowing you to be more versatile and develop a broader skill set. Mentorship and development: At Tate, we don't believe in hierarchy, we work together as one team for one common goal. You will have access and exposure to our senior leaders and experts for learning in your role, and additionally mentorship for the future. Culture: We have a great team culture, highly collaborative, supportive, and social. Together we innovate, collaborate, take ownership, and strive for excellence. Tate Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to legally protected characteristics. We are committed to providing reasonable accommodations to qualified individuals with disabilities. Employment may be contingent upon completion of post-offer requirements in accordance with applicable law. Stay connected with us on LinkedIn for insights into life at Tate. Join us in our mission to make a difference through exceptional solutions.

Clarkson Construction Company is a leading firm in the heavy civil construction industry, with a proud history of delivering complex infrastructure projects across the Kansas City region. Our portfolio spans grading, paving, and bridge construction, underscoring our commitment to excellence and innovation. Clarkson Construction Company offers a supportive and dynamic work environment where innovation and hard work are recognized and rewarded. We believe in investing in our employees through professional development and advancement opportunities. Join us and be a part of a team that shapes the infrastructure in and around one of America's most vibrant cities. Job Summary: The Senior Quality Technician plays a vital role in ensuring materials and construction processes meet all project and agency specifications for MoDOT and KDOT projects. This position performs and oversees testing and inspection of concrete, aggregates, soils, and cement-treated base in both field and laboratory environments. The Senior Quality Technician verifies compliance with contract documents, leads and mentors other technicians, and supports Quality Control Managers in implementing Clarkson's quality management program. This role requires strong technical knowledge of materials testing procedures, field inspection practices, and agency documentation standards. The ideal candidate will be comfortable working independently on active construction sites, coordinating directly with project engineers, superintendents, and client representatives to address quality concerns in real time. Essential Functions / Responsibilities: Perform and lead field inspections and materials testing for concrete, aggregates, soils, asphalt, and cement-treated base in accordance with MoDOT, KDOT, ASTM, and AASHTO procedures. Inspect rebar placement, formwork, subgrade preparation, and material delivery to verify compliance with approved plans and specifications. Conduct field testing such as moisture/density (nuclear gauge) and plastic concrete properties, ensuring timely and accurate results. Review and interpret test data and inspection results, identify deviations from specifications, and recommend corrective actions as needed. Train and mentor Quality Technicians in approved test procedures, equipment operation, calibration, and proper documentation. Coordinate with Project Managers, Superintendents, and client representatives to ensure timely communication and resolution of quality-related issues. Oversee collection and submission of test results, inspection reports, and documentation through company systems, or equivalent platforms. Assist Quality Control Managers with implementation of project-specific quality plans, materials documentation, and agency submittal requirements. Maintain, calibrate, and verify testing equipment to ensure reliability and accuracy of results. Support continuous improvement initiatives by identifying opportunities to enhance testing efficiency, accuracy, and safety practices. Demonstrate leadership in maintaining safe work practices and compliance with OSHA, Clarkson safety policies, and PPE requirements. Stay current with MoDOT and KDOT material testing procedures and certification requirements, participating in ongoing training and recertification as needed. Perform other related duties as assigned to support overall project quality and success. Knowledge, Skills, and Abilities: Comprehensive understanding of MoDOT and KDOT specifications and testing procedures for concrete, asphalt, soils, aggregates, and cement-treated base materials. Hands-on experience performing field inspections and quality testing, including concrete testing, rebar inspection, subgrade evaluation, density testing, and mix verification. Ability to interpret construction plans, standard drawings, and material specifications to ensure conformance and document field conditions accurately. Proficient in analyzing test results, identifying deviations from specification, and implementing corrective measures with project teams. Strong documentation and reporting skills, including completion and submittal of test forms, inspection reports, and daily summaries in compliance with project and agency standards. Effective communication and coordination skills to interface with contractors, engineers, and project management on quality-related matters. Leadership ability to mentor and train technicians on approved testing methods, safety procedures, and documentation practices. Proficiency in Microsoft Office (Excel, Word, Outlook) and familiarity with digital data management and document control systems. Commitment to safety, accuracy, and continuous improvement, promoting a culture of quality and accountability in all testing and inspection activities. Ability to work independently in the field, manage multiple testing priorities, and adapt to changing site and schedule conditions. Other Responsibilities: Report to work on time and prepared for scheduled assignments. Communicate any absences or delays to the supervisor as early as possible. Travel to local jobsites as required. Successfully pass a pre-employment drug screening and background check. Qualifications Requirements: High School Diploma or GED. Basic computer skills including Excel, Word, and Outlook. KDOT/ MoDOT Certifications ACI Concrete Certification Nuclear Gauge Certification Physical Requirements and Working Environment: Ability to sit, climb, balance, stoop, kneel, crouch or crawl, walk, stand; Able to frequently lift and/or move up to 10 lbs. and lift and/or move up to 50 lbs. This position requires in-person work. Work is often performed next to live traffic, in outdoor weather conditions, with and around large heavy civil construction machinery. Work is also performed in a lab setting. May be exposed to extreme outdoor weather conditions. Must be willing to work non-traditional hours, including night shifts and overtime, as assigned.

Job Description About Us At Tate we are passionate about everything we do. As an independent brand operating within Kingspan Group, a global plc group of companies, Tate has been recognized worldwide as an industry leader in the development and manufacture of data center infrastructure solutions and commercial office raised access floors, for over 60 years. With revenues of over $420m and growing, Tate plays a pivotal role in offering expertise in cutting edge design engineering in order to craft solutions, by working collaboratively with clients as a trusted partner. Tate continues to grow and expand, operating multiple manufacturing and commercial sites across the US, Europe, the Middle East, Asia, and Australia. We are excited about our fresh, dynamic, and inclusive team of experts working on new innovations and forward-thinking designs, as we remain a market leading player within our industry. We continue to invest heavily in the best available manufacturing tools and equipment needed to adhere to Tate's world class standards and in keeping with our Planet Passionate sustainability strategy, our focus is on having minimal climate impact. We are excited by potentially welcoming you as part of our team as we continue to grow on a worldwide scale. About the Role We are looking for a Quality Technician 1 to join our team. The Quality Technician 1 is responsible for quality inspection for all products to ensure they conform to all applicable company and quality standards. This position will test products after, in process, and in final stages to ensure quality levels are met. What You'll Do Ensures all test equipment is properly maintained and calibrated Performs routine & job specific load performance tests to ensure compliance with published specs. Performs incoming inspections on products received from vendor. Has a working knowledge of all equipment and machinery within the facility. Performs daily in process quality audits on products on production floor. Performs testing needed for qualifications of new or revised products. Maintains updated certified testing reports on standard products. Assists with continuous improvement of product and manufacturing processes to improve quality, reduce costs, and ensure product quality objectives are met. As assigned by supervisor, visits job sites to identify problems and recommends solutions. Maintains good housekeeping and follow established safety procedures. Performs other duties as assigned or directed by Team Leader/Supervisor. Follows all policies, procedures, and work instructions including Employee Handbook, Standard Operating Procedures (SOPs), Manufacturing Operating Procedures (MOPs), Job Safety Analysis (JSAs), and Safety Manual. Maintains awareness of individual contribution to and impact of the quality, safety, environmental, and product compliance policies and activities; reports all quality issues, unsafe acts, and unsafe conditions to the proper personnel. Additional Expectations Remain compliant with the Code of Conduct and Policies which includes the Kingspan Group Compliance Policy. Ensure that all duties related to product compliance are adhered to in accordance with the Product Compliance Policy, Laws, Regulations, and market demands. Responsible for all tasks to achieve compliance goals and demands of the Compliance Management System. Must raise concerns related to the Compliance Management System to their supervisor, manager, or any member of the Leadership Team, or through the confidential whistle blower service. What You'll Bring High school diploma or GED; or equivalent experience. Must be able to lift up to 50 lbs. unassisted. Must be able to stand, walk, bend, stoop or crouch for at least an 8-hour shift. Must be computer literate, including proficiency with Microsoft Office Products. Ability to use various tools and measuring instruments such as calipers, micrometers, tape measures, dial indicators, feeler gauges, etc. and verify all test equipment is in calibration and maintained in good working order. Strong shop-floor orientation. Knowledge of aluminum cutting and milling operation is a plus. Must be able to work in a fast-paced working environment with accuracy and integrity. Strong written and verbal communication skills. Detail-oriented. Three (3) plus years manufacturing experience. What You'll Get Pay range: $23 USD to $25 USD per hour. Career Scope and Advancement: As we grow, new positions and career opportunities arise, offering accelerated paths for the right candidates, locally and globally. World of Wellness Philosophy: We empower you to take charge of your health and well-being. You'll have access to a wide range of medical, dental, and vision benefits, along with personalized guidance from a “Health Advocate.” We also offer other supplemental options, including 401k, legal, disability, and theft insurance, to ensure your financial wellness. Corporate Social Responsibility: Through Planet Passionate we are determined to reduce our manufacturing carbon (CO2e) emissions to as close to zero as technically possible, together with halving carbon intensity in our primary supply chain. We are very involved in our community, and you will have ample opportunities to support us in creating a better world. Skills Development: Given the dynamic pace of our business and a strong collaborative environment, your new role will be diverse and multifaceted - allowing you to be more versatile and develop a broader skill set. Mentorship and development: At Tate, we don't believe in hierarchy, we work together as one team for one common goal. You will have access and exposure to our senior leaders and experts for learning in your role, and additionally mentorship for the future. Culture: We have a great team culture, highly collaborative, supportive, and social. Together we innovate, collaborate, take ownership, and strive for excellence. Stay connected with us on LinkedIn for insights into life at Tate. Join us in our mission to make a difference through exceptional solutions. Tate Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to legally protected characteristics. We are committed to providing reasonable accommodations to qualified individuals with disabilities. Employment may be contingent upon completion of post-offer requirements in accordance with applicable law.

Job Description About Us At Tate we are passionate about everything we do. As an independent brand operating within Kingspan Group, a global plc group of companies, Tate has been recognized worldwide as an industry leader in the development and manufacture of data center infrastructure solutions and commercial office raised access floors, for over 60 years. With revenues of over $420m and growing, Tate plays a pivotal role in offering expertise in cutting edge design engineering in order to craft solutions, by working collaboratively with clients as a trusted partner. Tate continues to grow and expand, operating multiple manufacturing and commercial sites across the US, Europe, the Middle East, Asia, and Australia. We are excited about our fresh, dynamic, and inclusive team of experts working on new innovations and forward-thinking designs, as we remain a market leading player within our industry. We continue to invest heavily in the best available manufacturing tools and equipment needed to adhere to Tate's world class standards and in keeping with our Planet Passionate sustainability strategy, our focus is on having minimal climate impact. We are excited by potentially welcoming you as part of our team as we continue to grow on a worldwide scale. About the Role We are looking for a Quality Technician 1 to join our team. The Quality Technician 1 is responsible for quality inspection for all products to ensure they conform to all applicable company and quality standards. This position will test products after, in process, and in final stages to ensure quality levels are met. What You'll Do Ensures all test equipment is properly maintained and calibrated Performs routine & job specific load performance tests to ensure compliance with published specs. Performs incoming inspections on products received from vendor. Has a working knowledge of all equipment and machinery within the facility. Performs daily in process quality audits on products on production floor. Performs testing needed for qualifications of new or revised products. Maintains updated certified testing reports on standard products. Assists with continuous improvement of product and manufacturing processes to improve quality, reduce costs, and ensure product quality objectives are met. As assigned by supervisor, visits job sites to identify problems and recommends solutions. Maintains good housekeeping and follow established safety procedures. Performs other duties as assigned or directed by Team Leader/Supervisor. Follows all policies, procedures, and work instructions including Employee Handbook, Standard Operating Procedures (SOPs), Manufacturing Operating Procedures (MOPs), Job Safety Analysis (JSAs), and Safety Manual. Maintains awareness of individual contribution to and impact of the quality, safety, environmental, and product compliance policies and activities; reports all quality issues, unsafe acts, and unsafe conditions to the proper personnel. Additional Expectations Remain compliant with the Code of Conduct and Policies which includes the Kingspan Group Compliance Policy. Ensure that all duties related to product compliance are adhered to in accordance with the Product Compliance Policy, Laws, Regulations, and market demands. Responsible for all tasks to achieve compliance goals and demands of the Compliance Management System. Must raise concerns related to the Compliance Management System to their supervisor, manager, or any member of the Leadership Team, or through the confidential whistle blower service. What You'll Bring High school diploma or GED; or equivalent experience. Must be able to lift up to 50 lbs. unassisted. Must be able to stand, walk, bend, stoop or crouch for at least an 8-hour shift. Must be computer literate, including proficiency with Microsoft Office Products. Ability to use various tools and measuring instruments such as calipers, micrometers, tape measures, dial indicators, feeler gauges, etc. and verify all test equipment is in calibration and maintained in good working order. Strong shop-floor orientation. Knowledge of aluminum cutting and milling operation is a plus. Must be able to work in a fast-paced working environment with accuracy and integrity. Strong written and verbal communication skills. Detail-oriented. Three (3) plus years manufacturing experience. What You'll Get Pay range: $23 USD to $25 USD per hour. Career Scope and Advancement: As we grow, new positions and career opportunities arise, offering accelerated paths for the right candidates, locally and globally. World of Wellness Philosophy: We empower you to take charge of your health and well-being. You'll have access to a wide range of medical, dental, and vision benefits, along with personalized guidance from a “Health Advocate.” We also offer other supplemental options, including 401k, legal, disability, and theft insurance, to ensure your financial wellness. Corporate Social Responsibility: Through Planet Passionate we are determined to reduce our manufacturing carbon (CO2e) emissions to as close to zero as technically possible, together with halving carbon intensity in our primary supply chain. We are very involved in our community, and you will have ample opportunities to support us in creating a better world. Skills Development: Given the dynamic pace of our business and a strong collaborative environment, your new role will be diverse and multifaceted - allowing you to be more versatile and develop a broader skill set. Mentorship and development: At Tate, we don't believe in hierarchy, we work together as one team for one common goal. You will have access and exposure to our senior leaders and experts for learning in your role, and additionally mentorship for the future. Culture: We have a great team culture, highly collaborative, supportive, and social. Together we innovate, collaborate, take ownership, and strive for excellence. Stay connected with us on LinkedIn for insights into life at Tate. Join us in our mission to make a difference through exceptional solutions. Tate Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to legally protected characteristics. We are committed to providing reasonable accommodations to qualified individuals with disabilities. Employment may be contingent upon completion of post-offer requirements in accordance with applicable law.

Build Your Legacy with Veritas Steel! We take great pride in the bridges we build, and in the people who build them (and maintain our equipment)! _______________________________________________________________________________________________________________________________________________________________________________ Openings in Eau Claire, WI on all shifts! **MUST HOLD A CURRENT CWI or ASNT VT Level II** **Relocation assistance may be provided** We offer a very competitive benefit package! We offer company-paid life and accidental death & dismemberment insurance and short-term disability insurance, employee-paid medical insurance, dental and vision care, long-term disability insurance, flexible spending account, a retirement plan, earned vacation time & 10 paid Holidays! We provide uniforms, annual boot allowance, and provide necessary Safety Personal Protective Equipment (PPE). Principle Duties & Responsibilities:Perform visual inspection of material as required. Perform layout checks as needed.Perform rotational capacity tests on bolts prior to use in shop.Work with outside inspectors to resolve quality issues on the floor. Monitor welder qualification tests.Monitor and record welding parameters to insure compliance to approved WPS.Be able to read and understand the Welding code and Specifications.Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed.Develop improvements in the quality control process to facilitate flow of work through shop.Conduct audits of Quality Management SystemPerform in a manner that will assure quality work flowing through the shop.Work with welders and leadmen to maintain quality.Be available, by use of a radio, etc. to perform needed checks.Maintain a log of work done, and complete required reports.Interpret the Specifications and applicable Codes.Ability to be flexible to work either early or late within assigned shift as needed.Coordinate inspection of QC hold points between production and DOT Inspectors.Use and encourage safe working habits.Knowledge, Skills, & Abilities:Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules.Ability to understand and interpret blueprints, use measurement tools and techniques to verify geometric tolerances of fabricated parts and assemblies. Strong attention to detail and ability to make informed decisions based on project codes and specifications Coordinate your work with shipping department to assure loads have been inspected and ready to ship.Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop.General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed.Positive attitude to promote team morale and ability to coach employees for improved quality of workmanship Requirements:Certified Welding Inspector Certification or ASNT VT Level II Preferred Qualifications:ASNT MT Level IIASNT UT Level IINACE or SSPC BCI Level IFabrication Shop BackgroundSafety is our priority! We have a very extensive training program to ensure the safety of all of our employees. Veritas Steel is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. PIcf0fca8dc1ad-31181-39546728

Established in 1999, Onyett Fabricators is a dedicated shop providing fabrication and field services, welding, and other structural metalwork for the coal, aggregate, and construction industries. Onyett has 34,000 square feet of shop space and operates 24/7 to meet our clients' needs. SERVICES * Line Boring, Shop and Field * All Size Bucket Repairs * Structural Steel Fabrication * Dozer Repairs and Liners * Ripper Repairs and New Machined AR400 Rippers * Barge and Pontoon Fabrication * Hard Facing and Tungsten Carbiding Capabilities * Multiple Machining Capabilities * Drill Stem Repairs and Manufacture * New Stock Plate in Mild Steel, AR400, Nickel Chrome and Chromium Clad Overlay AREAS OF WORK * Coal Mines * Power Plants (Gas, Coal) * Cement Plants * Aggregate (Rock and Sand) * Farming * Construction (Dirt and Asphalt) * Dredging * Tunneling and Boring Companies PORTABLE FIELD SERVICE 20 Trucks Equipped with: * Cranes * Welding Equipment * Air Arcs * Air Compressors * Line Boring Equipment MACHINE SHOP 34,000 sq ft, 24/7 Work Hours Overhead Cranes Five (5) 5-ton Cranes Two (2) 2-ton Cranes Cutting Table Plasma CNC Cutting to 2 in Torch CNC Cutting to 6 in Blast and Paint Capabilities 2,100 sq ft Paint Bay Presses 450-ton Press 1,000-ton Press up to 20 ft Long Toshiba/Shibaura CNC Horizontal Boring Mill 5 Axis Table, 118 in Cross Travel x 95 in Height Travel 25,000 lb Capacity Haas Vertical Machining Center 4 Axis Table, 50 in x 25 in Travel 16 Position Tool Changer Toshiba CNC Vertical Lathe 59 in x 70 in Table with 59 in Height 17,600 lb Capacity Viper VT-50 CNC Lathe 25 in Double Chucks 9.25 in Spindle Bore 34 in Turning Capacity x 40 in Swing Cincinnati Milacron Avenger 250S Lathe 10.39 Diameter x 16.42 Length Sub Spindle 65 in Poreba Hollow Spindle Lathe Double Chucks Swing 47 in x 120 in Center to Center Chucks Position Summary: The Quality Technician will be instrumental in maintaining product excellence by conducting thorough testing and analysis of raw materials, in-process components, and finished products. Key Tasks and Responsibilities * Develop and construct quality assurance test plans based on product specifications and requirements. * Perform routine and non-routine analysis of raw materials, in-process materials, and finished products using various testing devices and procedures. * Collect, measure, and weigh samples of materials in accordance with established sampling plans. * Conduct analytical tests on samples using instrumentation and equipment, interpreting results to assess factors such as purity, particle size, and hardness. * Apply arithmetic formulas and statistical methods to analyze test data and evaluate product quality. * Document and report test results accurately and promptly, maintaining comprehensive records of all tests conducted. * Collaborate closely with production teams and other departments to perform and validate tests, ensuring adherence to predetermined quality guidelines. * Recommend changes to quality guidelines based on test results and continuous improvement initiatives. * Calibrate and maintain testing equipment to ensure accuracy and reliability of test results. * Implement quality control procedures and protocols to meet regulatory standards and customer specifications. * Provide training and guidance to production personnel on quality standards, testing methods, and procedures. Skills and Abilities * Proficient in conducting analytical tests using various testing devices and instrumentation. * Strong mathematical skills and ability to apply arithmetic formulas and statistical methods for data analysis. * Detail-oriented with excellent documentation and record-keeping abilities. * Effective communication skills, both verbal and written, with the ability to collaborate cross-functionally. * Problem-solving skills and the ability to identify and resolve quality issues. * Familiarity with quality control standards, regulations, and procedures. * Experience in calibration and maintenance of testing equipment is advantageous. Education/Experience * Associate degree in Chemistry, Materials Science, Engineering Technology, or a related field; or equivalent work experience in manufacturing * Previous experience in quality control or quality assurance within a fabrication or manufacturing environment is preferred. Physical Demands * Travel will be required to attend training and meetings. * Ability to sit or stand for the entire shift * Occasionally required to stoop, bend, walk, crouch, and climb. * Ability to lift, frequently, at least 50 pounds. * Ability to speak, write, and understand English clearly. Required Skills Traylor Bros., Inc. is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, veteran status, sex, sexual orientation, gender identity, age, genetic information, pregnancy, disability, protected activity, or other non-merit factors.

Clarkson Construction Company is a leading firm in the heavy civil construction industry, with a proud history of delivering complex infrastructure projects across the Kansas City region. Our portfolio spans grading, paving, and bridge construction, underscoring our commitment to excellence and innovation. Clarkson Construction Company offers a supportive and dynamic work environment where innovation and hard work are recognized and rewarded. We believe in investing in our employees through professional development and advancement opportunities. Join us and be a part of a team that shapes the infrastructure in and around one of America's most vibrant cities. Job Summary: The Senior Quality Technician plays a vital role in ensuring materials and construction processes meet all project and agency specifications for MoDOT and KDOT projects. This position performs and oversees testing and inspection of concrete, aggregates, soils, and cement-treated base in both field and laboratory environments. The Senior Quality Technician verifies compliance with contract documents, leads and mentors other technicians, and supports Quality Control Managers in implementing Clarkson's quality management program. This role requires strong technical knowledge of materials testing procedures, field inspection practices, and agency documentation standards. The ideal candidate will be comfortable working independently on active construction sites, coordinating directly with project engineers, superintendents, and client representatives to address quality concerns in real time. Essential Functions / Responsibilities: Perform and lead field inspections and materials testing for concrete, aggregates, soils, asphalt, and cement-treated base in accordance with MoDOT, KDOT, ASTM, and AASHTO procedures. Inspect rebar placement, formwork, subgrade preparation, and material delivery to verify compliance with approved plans and specifications. Conduct field testing such as moisture/density (nuclear gauge) and plastic concrete properties, ensuring timely and accurate results. Review and interpret test data and inspection results, identify deviations from specifications, and recommend corrective actions as needed. Train and mentor Quality Technicians in approved test procedures, equipment operation, calibration, and proper documentation. Coordinate with Project Managers, Superintendents, and client representatives to ensure timely communication and resolution of quality-related issues. Oversee collection and submission of test results, inspection reports, and documentation through company systems, or equivalent platforms. Assist Quality Control Managers with implementation of project-specific quality plans, materials documentation, and agency submittal requirements. Maintain, calibrate, and verify testing equipment to ensure reliability and accuracy of results. Support continuous improvement initiatives by identifying opportunities to enhance testing efficiency, accuracy, and safety practices. Demonstrate leadership in maintaining safe work practices and compliance with OSHA, Clarkson safety policies, and PPE requirements. Stay current with MoDOT and KDOT material testing procedures and certification requirements, participating in ongoing training and recertification as needed. Perform other related duties as assigned to support overall project quality and success. Knowledge, Skills, and Abilities: Comprehensive understanding of MoDOT and KDOT specifications and testing procedures for concrete, asphalt, soils, aggregates, and cement-treated base materials. Hands-on experience performing field inspections and quality testing, including concrete testing, rebar inspection, subgrade evaluation, density testing, and mix verification. Ability to interpret construction plans, standard drawings, and material specifications to ensure conformance and document field conditions accurately. Proficient in analyzing test results, identifying deviations from specification, and implementing corrective measures with project teams. Strong documentation and reporting skills, including completion and submittal of test forms, inspection reports, and daily summaries in compliance with project and agency standards. Effective communication and coordination skills to interface with contractors, engineers, and project management on quality-related matters. Leadership ability to mentor and train technicians on approved testing methods, safety procedures, and documentation practices. Proficiency in Microsoft Office (Excel, Word, Outlook) and familiarity with digital data management and document control systems. Commitment to safety, accuracy, and continuous improvement, promoting a culture of quality and accountability in all testing and inspection activities. Ability to work independently in the field, manage multiple testing priorities, and adapt to changing site and schedule conditions. Other Responsibilities: Report to work on time and prepared for scheduled assignments. Communicate any absences or delays to the supervisor as early as possible. Travel to local jobsites as required. Successfully pass a pre-employment drug screening and background check. Qualifications Requirements: High School Diploma or GED. Basic computer skills including Excel, Word, and Outlook. KDOT/ MoDOT Certifications ACI Concrete Certification Nuclear Gauge Certification Physical Requirements and Working Environment: Ability to sit, climb, balance, stoop, kneel, crouch or crawl, walk, stand; Able to frequently lift and/or move up to 10 lbs. and lift and/or move up to 50 lbs. This position requires in-person work. Work is often performed next to live traffic, in outdoor weather conditions, with and around large heavy civil construction machinery. Work is also performed in a lab setting. May be exposed to extreme outdoor weather conditions. Must be willing to work non-traditional hours, including night shifts and overtime, as assigned.