Mechanical Systems Engineer jobs at Sandia National Labs - 98 jobs

Apply for JobJob ID696085 Full/Part TimeFull-Time Regular/TemporaryRegular Add to Favorite JobsEmail this Job About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: Challenging work with amazing impact that contributes to security, peace, and freedom worldwide Extraordinary co-workers Some of the best tools, equipment, and research facilities in the world Career advancement and enrichment opportunities Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: *These benefits vary by job classification. What Your Job Will Be Like Are you looking for an opportunity to contribute to a highly motivated team focused on delivering qualified electronic components to a national security mission? The Advanced RF ICs and Microsystems department (5255) seeks an R&D Microwave and Sensor Engineer to design, fabricate, test, qualify, and deliver custom-designed microwave components. These components enable military communication systems, SAR imaging, doppler radar, and tagging, tracking, and locating hardware. Our team seeks a driven RF engineer capable of fundamental electromagnetic modeling, transistor-level circuit simulation, and distributed element microwave PCB design. It is also important for the candidate to understand electronic die characterization, RF test equipment, solder assembly, PCB development, and fabrication. On any given day, you may be called on to: Use circuit modeling tools to design analog or RF integrated circuit components for transceivers. Use circuit and electromagnetic modeling tools to design high sensitivity radio frequency components. Run Monte Carlo simulations over voltage, temperature, and process corners Model active circuit components: AC, Transient, Harmonic Balance, EM Characterize RF components and modules over extreme environmental stresses. Troubleshoot analog or RF circuits in a modern, well-equipped electronics lab Use of electronic equipment to measure slew rate, gain, stability, phase noise, jitter, s-parameters, power output, P1dB, PSat, noise figure, modulation quality (EVM), or sensitivity. Ability to effectively collaborate with technologists and engineers to test and characterize new devices in a variety of technology nodes/processes. Team to design, prototype, analyze, and evaluate microsystems that achieve increased performances. Communicate results and findings to co-workers and potential customers. Identify, develop, and pursue new technology opportunities in areas that support Sandia mission activities. Contribute to several areas ranging from fundamental semiconductor devices, through circuit and components, and up to sub-system architecture. The selected applicant can work a combination of onsite and offsite work. The selected applicant must live within a reasonable distance for commuting to the assigned work location when necessary. Salary Range $99,400 - $193,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. Ability to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire The ideal R&D Microwave & Sensor Engineer candidate for Sandia National Laboratories will in addition possess the following: Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). Laboratory skills and knowledge of RF and digital test equipment. Knowledge of RF, Digital Communications, Electronic Warfare, and Cyber Security systems and principles. Ability to work successfully in a dynamic, interdisciplinary, teaming environment. Also, for this posting we are seeking individuals with the following experience: Experience with nano- or micro-scale, semiconductor device technologies. RF or high-speed integrated circuit design using Cadence Virtuoso, Synopsis, or Siemens products. Use of RF test equipment such as spectrum analyzers, vector network analyzers, pulsed signal generators, oscilloscopes, and precision power supplies. Electrical test and measure practices to protect sensitive devices and equipment to troubleshooting high frequency circuitry . Understanding of electronic die characterization, RF test equipment, working knowledge of solder assembly, PCB development and fabrication. Adaptability and flexibility to address rapidly advancing technologies and evolving customer needs. Proficiency with software for data analysis and instrument control in C#, LabVIEW, MATLAB, or Python. Familiarity with microscale packaging and integration techniques as well as approaches for microsystem rapid prototyping and integration. Design and characterization of analog, high-speed digital, RF, or microwave devices or circuits. Microelectronics realization including requirements definition, device behavior, circuit design, mask layout, fabrication, testing, and documentation. Recent Laboratory test and measurement of analog and RF components using tools such as high-speed oscilloscopes, network analyzers, parameter analyzers, and probe stations. Experience with/in: Analog and RF modeling using commercially available simulation tools in semiconductor, electromagnetic, and/or circuit design using Cadence, Mentor Graphics, EMX. Strong oral, written, and technical writing skills to provide sponsors and vendors convincing evidence of quality designs. LabVIEW, MATLAB, and C++ programming experience. Active DOD TS or DOE Q level clearance. About Our Team The Advance RF ICs and Microsystems department performs research, design, modeling, characterization, and qualification of RF microelectronics. We have a focus on efficient, high performance RF component design, electromagnetic modeling, as well as novel wireless sensor development. We have capabilities for developing between prototypes to fully qualified hardware. We provide unique solutions to our customers in nuclear weapons, DoD, non-proliferation agencies, and subsystem departments (SAR, surety, & ISR). Our research interests include advanced RF sensors, low power communication devices, quantum computing electromagnetics, advanced radar component design, and next generation resonators for clocks unique to national security applications. Join this team to make a difference for our nation and work toward your individual goals. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date.

Apply for JobJob ID696664 Full/Part TimeFull-Time Regular/TemporaryRegular Add to Favorite JobsEmail this Job About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: Challenging work with amazing impact that contributes to security, peace, and freedom worldwide Extraordinary co-workers Some of the best tools, equipment, and research facilities in the world Career advancement and enrichment opportunities Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: *These benefits vary by job classification. What Your Job Will Be Like We are seeking a R&D S&E, Mechanical Engineer to join the Purchased Product Value Stream group. The selected candidate will be the technical interface to product realization teams and the commercial supply base for the design and delivery of mechanical parts/components used in nuclear weapon design, development, and production activities. They will also participate in the product realization process (design through delivery), including early engagement in the development phase to define, validate, and clarify requirements for mechanical parts/components destined for use in nuclear weapons. On any given day, you may be called on to: Lead the identification, development, and qualification of suppliers, assessing the technical capabilities of the suppliers to meet weapons requirements. Lead efforts to improve fundamental understanding of material requirements, defining and conducting experiment work to close knowledge gaps and improve design definition. Anticipate and maintain risk (i.e., sole source suppliers, sunset materials, technology development, etc.), identifying viable alternates and leading the technical evaluations and decision-making process. Run product design definition (drawings, specifications, etc.) through the product life cycle (design-development-delivery). Employ quality management systems and techniques, developing and managing comprehensive verification/qualification plans and defining acceptance criteria. Manage multiple organizational interfaces, internally and externally. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $102,400 - $199,700 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development Ability to obtain and maintain a DOE Q clearance Qualifications We Desire The ideal R&D S&E Mechanical Engineer candidate for Sandia National Laboratories will in addition possess the following: Graduate degree in Mechanical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). Experience with mechanical engineering and product realization in the NNSA complex. Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. Also, for this posting we are seeking individuals with the following experience: Experience in Supply Chain Engineering Project management experience Proven leadership skills The ability to work in a fast-paced, schedule driven environment Experience in application of the scientific method; gathering, analyzing and presenting technical data for decision making and problem-solving purposes Basic knowledge of design for manufacturing (DFM), Lean/Six Sigma, continuous improvement and their application, and additive manufacturing and use of additive manufacturing equipment Exposure and/or basic knowledge to Geometric Dimensioning & Tolerancing (GD&T) Knowledge of statistically based tolerance analysis The desire to maximize engineering expertise in the weapons product realization process; cradle to grave An active DOE Q-level security clearance; or other equivalent active security clearance such as DOD Top Secret About Our Team The Purchased Product Value Stream Department is responsible for purchased products and logistic operations in support of Sandia National Laboratories production mission activities. Major areas of responsibility include: Materials Planning - is responsible for developing the plan and authorizes procurement of production materials based on master schedule requirements. Purchased Product Engineering - is responsible for purchased products, including raw materials, tooling and end item components; serving as the liaison to design, product, and process engineers, production users, and suppliers in the areas of design definition, coordination of fabrication, and acceptance requirements. Inventory Management & Logistics - provides services in inventory management, materials movement, receiving, and shipping. Change Configuration Management Cell - manages the execution of product configuration in the Sandia drawing system and the Oracle manufacturing system for the Production Center. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date.

Apply for JobJob ID696646 Full/Part TimeFull-Time Regular/TemporaryRegular Add to Favorite JobsEmail this Job About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: Challenging work with amazing impact that contributes to security, peace, and freedom worldwide Extraordinary co-workers Some of the best tools, equipment, and research facilities in the world Career advancement and enrichment opportunities Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: *These benefits vary by job classification. What Your Job Will Be Like We are seeking a highly motivated Product Engineer to join our Explosive Component Production team within the Explosive Technologies Group at Sandia National Laboratories. This department is responsible for the Production of explosive components, including detonators, ignitors, actuators, and other explosive components, in support of the Nuclear Deterrence mission. On any given day, you may be called on to: Manage product definition (graphic drawings and specifications) for explosive components under development or in production Collaborate with engineers, technologists, and project management to stand up and qualify new production capabilities for explosive components Work with external suppliers to produce development or Mark Quality product Engage in hands-on work in a laboratory environment, ensuring adherence to safety protocols and best practices. Ensure product quality and design intent through technical oversight, defect investigations, and root cause analyses. Drive continuous improvement initiatives to enhance key Production metrics. Design and develop processes for product manufacturing, including planning sequences of operations and specifying procedures for material transformation. Conduct tests and measurements throughout production stages to maintain control over process and product variables. Utilize systematic problem-solving methods to drive process understanding and improvements. Occasional travel may be required. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $102,400 - $199,700 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development Active DOE Q clearance, or equivalent is required to start Qualifications We Desire The ideal R&D S&E Mechanical Engineer candidate for Sandia National Laboratories will in addition possess the following: Graduate degree in Mechanical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). Experience with mechanical engineering and product realization in the NNSA complex Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. Also, for this posting we are seeking individuals with the following experience: Experience interfacing with and participating in Product Realization Teams Experience with: Working in a high-quality production environment applying rigorous processes Installation, qualification, and maintenance of manufacturing process equipment Methods such as resistance welding, laser welding, leak checking, visual inspection, vacuum systems, and metrology Glass-to-metal sealing in a furnace and machining metals, glass, and ceramics With hazardous operations and a commitment to safety in an explosives facility Ability to: Develop, maintain, and improve manufacturing processes, including developing fixtures and tooling Analyze data and apply the analysis to decision-making Knowledge of lean manufacturing principles and statistical process control Familiarity with engineering drawings, including Geometric Dimensioning and Tolerancing (GD&T) About Our Team Department 7452, Explosive Component Production, is part of the Explosive Technologies Group (7450) and serves as the Production Agency (PA) for explosive components. Our team is responsible for the production of explosive components that support Life Extension Programs (LEPs), Alterations (ALTs), Legacy systems, and New Systems. We collaborate closely with both external suppliers and internal production floors to ensure the highest quality and efficiency in our operations. Our team plays a critical role in supporting the Nuclear Deterrence mission by ensuring the safe and efficient production of explosive components. We are dedicated to fostering a culture of safety, collaboration, and innovation, where every team member is valued and empowered to contribute to our mission. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Position requires a Department of Energy (DOE) Q security clearance to start, or equivalent active security clearance with another U.S. government agency (e.g., DOD). Sandia is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date.

Apply for JobJob ID696683 Full/Part TimeFull-Time Regular/TemporaryRegular Add to Favorite JobsEmail this Job About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: Challenging work with amazing impact that contributes to security, peace, and freedom worldwide Extraordinary co-workers Some of the best tools, equipment, and research facilities in the world Career advancement and enrichment opportunities Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: *These benefits vary by job classification. What Your Job Will Be Like We are seeking a computer engineer or computer scientist to participate in the development of embedded software and test software for advanced RF systems used in current and future national security applications. The selected candidate will demonstrate the ability to work in a dynamic team environment, sharing resources as well as programmatic responsibilities across the group. This position's primary focus will be the development of embedded software for specialized RF communication systems. It is crucial to have an interest in mixed-signal (RF, analog, digital) electrical designs, which enable the control, optimization, and troubleshooting of these special communication systems. Job duties include: Participation in product concept development and requirements definition Embedded software and firmware design, implementation, and documentation Development and execution of qualification and acceptance test procedures Support of system integration, deployment, and lifecycle sustainment Our systems are based on advanced signaling techniques and ultra-low power RF receiver/transmitter designs. Successful candidates will become part of a multi-disciplinary, success-oriented, high-performance project team delivering systems that positively impact our national security. Projects range from fast-paced, quick-reaction requests in response to real-world driven needs to longer-term, life-critical efforts with rigorous development requirements. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $102,400 - $199,700 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. Ability to obtain and maintain a DOE Q-level (or DOD equivalent) security clearance. Qualifications We Desire The ideal R&D S&E Computer Engineer candidate for Sandia National Laboratories will in addition possess the following: Graduate degree in Computer Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). Demonstrated ability to execute and deliver technical work products with application of appropriate rigor and pedigree documentation (design/code reviews, technical oversight/approvals, project team concurrence, artifact generation, etc.). Experience in computer systems design and software development for real-time and embedded processing systems, distributed processing systems, or real-time client server implementations. Familiarity with hardware/software requirements generation for verification, validation and qualification. Demonstrated interpersonal skills and ability to work in a multidisciplinary, multi-disciplinary team setting for a common purpose. Also, for this posting we are seeking individuals with the following experience: Preferred degrees in Electrical Engineering, Computer Engineering, or Computer Science. Experience developing embedded software and firmware in C/C++ for bare-metal and/or real-time operating system (RTOS) environments. Proficiency in time-critical control of electronics, peripherals, and sensors. Familiarity with general test and measurement equipment (oscilloscopes, digital multimeters, logic analyzers) and RF test equipment (network and spectrum analyzers). Strong critical-thinking, synthesis, and problem-solving skills, with the ability to resolve ambiguity. Ability to collaborate effectively within a software team, maintaining clear communication, consistent progress, and timely identification and escalation of risks or obstacles. Knowledge and experience with the implementation of the full software development process from requirements definition through verification and validation to delivery using Agile or iterative methodologies. Experience with Python or MATLAB programming languages. Experience with GitLab CI/CD development. Experience with version control systems like Git or Subversion. Experience with wireless systems design. Active security clearance (Secret or Top Secret) The ability to obtain and maintain SCI access, which may require a polygraph. About Our Team The High Reliability Special Communications Department (5372) develops terrestrial, airborne, and space-based special communications systems for use in surveillance, reconnaissance, and high-value target and material controls. Our customers include a variety of government organizations conducting special operations missions. Staff members possess a diverse skill set, including microwave circuit design, antenna design, signal analysis, digital signal processing, embedded software, and digital FPGA designs. Applications include long and short-range communications and transponder systems, typically utilizing ultra-low power signaling techniques. Our design challenges include highly miniaturized electronics, low-power maximally efficient transceivers, signal extraction in very low signal-to-noise environments, and signal analysis of RF and communication systems. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date.

Apply for JobJob ID696502 Full/Part TimeFull-Time Regular/TemporaryRegular Add to Favorite JobsEmail this Job About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: Challenging work with amazing impact that contributes to security, peace, and freedom worldwide Extraordinary co-workers Some of the best tools, equipment, and research facilities in the world Career advancement and enrichment opportunities Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: *These benefits vary by job classification. What Your Job Will Be Like We are seeking a R&D S&E, Systems Engineer who will blend engineering, analytics, and problem-solving to understand how complex manufacturing operations work and then design ways to make them safer, faster, and smarter. The selected candidate will build models, run simulations, analyze data, and work directly on production floors to uncover opportunities for improvement. The selected candidate will also collaborate closely with world-class experts and contribute to facility redesigns and strategic modernization efforts across the Nuclear Security Enterprise. This role involves solving difficult problems, working with high-impact systems, and using tools like Power Bi, Python, simulation software, and optimization to guide decisions to increase productivity. On any given day, you may be called on to: Gather information, perform assessments and studies with production staff, conduct production floor walkthroughs and processes mapping activities, and translate production information into model data Develop analytics models to assess, optimize, and make predictions for various production authorities involved in development and production activities Document model results, identify emerging areas of opportunity, lead investigative and exploratory projects, and present findings to peers and senior management Collaborate with multi-functional teams and other specialists on large, center-level projects Lead facility redesign efforts including accurate capture of current state and implementation of methods to determine alternative future states Work on other projects to be determined by the organization's needs and individual interests. These may include supporting strategic projects that seek to adapt or advance Center capabilities to meet new needs across the Nuclear Security Enterprise (NSE). These projects may include collaboration with a variety of internal and external NSE partners Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $99,400 - $193,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. Ability to obtain and maintain a DOE Q clearance Qualifications We Desire The ideal R&D S&E Systems Engineer candidate for Sandia National Laboratories will in addition possess the following: Graduate degree in Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation) Experience working with Nuclear Security Enterprise (NSE) laboratories and plants including Pantex, Kansas City National Security Campus (KCNSC), Lawrence Livermore Laboratory (LLNL) and Kansas City National Security Campus/New Mexico Operations (KCNSC/NMO) Experience working on engineering design, qualification, production, or related modeling/simulation projects Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams Also, for this posting we are seeking individuals with the following experience Experience working in or with a production/manufacturing environment Experience programming in one or more of the following: Python, Visual Basic for Applications (VBA), R, SQL, FlexSim FlexScript, or similar Experience with: Data mining, analysis and visualization (Python, Visual Basic for Applications (VBA), Power Bi, R, Minitab, JMP, SQL and/or related languages) Facilities design (Systematic Layout Planning) Discrete event simulation (FlexSim, Arena, Simio or other comparable software) or Optimization (Gurobi, CPLEX, or other like software) Lean Six Sigma or other standardized problem-solving methodologies Ability to work independently and complete tasks in a timely manner About Our Team The Inventory Management and Logistics Value Stream Department (IMLVS), Org. 07561, oversees bonded stores and materials operations that support the Neutron Generator (NG) Enterprise and other NW production partners. IMLVS works in a high-consequence operational envelope encompassing classified materials, precious metals, closed areas, chemicals, explosives, and radioactive materials. The organization is responsible for assuring the integrity and traceability of weapons material though the logistics supply chain which includes receiving, incoming acceptance, warehousing, inventory management, material movement and shipping. IMLVS is responsible for the design, development, testing, and delivery of Department of Transportation (DOT) compliant packaging solutions, operations engineering and planning for the build of packaging kits and NG disassembly activities, and oversees the planning, coordination and execution of outbound customer shipments. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date.

Apply for JobJob ID696530 Full/Part TimeFull-Time Regular/TemporaryRegular Add to Favorite JobsEmail this Job About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: Challenging work with amazing impact that contributes to security, peace, and freedom worldwide Extraordinary co-workers Some of the best tools, equipment, and research facilities in the world Career advancement and enrichment opportunities Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: *These benefits vary by job classification. What Your Job Will Be Like Are you passionate about Electrical Engineering and eager to utilize state-of-the-art facilities to tackle ambitious challenges related to national security? We are seeking multiple Electrical Engineers with experience in analog or digital circuit design to join our teams. The selected applicants will be responsible for designing, developing, testing, qualifying, and monitoring firing subsystems and other high-consequence embedded systems that are used daily in U.S. Navy and U.S. Air Force nuclear weapons programs, as well as other national security programs. On any given day, one may be called upon to: Collaborate on multidisciplinary teams, providing ownership and direction for electrical designs. Coordinate with customers, production agencies, and stakeholders to support design, testing, development, qualification, and production activities Analyze performance against requirements, build prototypes, and refine designs Perform modeling and simulation of design performance using tools such as Pspice, LTspice and MATLAB/Simulink Communicate technical information and project status effectively to team members, customers, and management Applicants on this requisition may be interviewed by multiple organizations at Sandia National Laboratories. Travel to partner and customer locations as required (generally less than 5 days per month). Applicants chosen for an interview will be asked to provide an overview briefing of an example that illustrates relevant design experience. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $99,400 - $193,600 *Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. Ability to obtain and maintain a DOE Q clearance Ability to obtain and maintain Sigma 15 access Qualifications We Desire The ideal R&D S&E Electrical Engineer candidate for Sandia National Laboratories will in addition possess the following: Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation) Ability to work independently and collaborate well in a multidisciplinary team of designers and test engineers Outstanding verbal and written skills, including the ability to develop and present briefings that are clear and compelling Also, for this posting we are seeking individuals with the following experience: Experience with high voltage electronics The ability to acquire and maintain qualifications for working safely with high voltage electronics Experience working in Nuclear Deterrence mission spaces including design, development, production, or surveillance Experience working in a production or manufacturing environment Demonstrated attention to detail An active DOE Q-level security clearance; or other equivalent active security clearance such as DOD Top Secret with CNWDI About Our Team The Firing & Embedded Systems group (7620) is a recognized leader in realizing safe, secure, and reliable products. We research, design, develop, and deliver highly reliable, trusted systems and high consequence hardware and software products to serve our National Security customers today, tomorrow, and always. Our technical backgrounds are diverse. Some of us have spent years focusing on the fine details of particular technologies and are recognized as nation-level specialists. Some of us are generalists and support multiple projectskeeping things connected and developing new skills. Our teams are comprised of specialists and generalists working together, and it is easy to shift between projects and technical roles over time. If this environment sounds appealing, wed like to meet you! Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date.

**What You Will Do** This position will be filled at either the Nuclear Facilities Engineer 1/2 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level. **Nuclear Facilities Engineer 1 ($94,500 - $154,600)** Within this job, successful candidates will have to opportunity to support the Laboratory's mission by serving as the subject matter expert for nuclear facility electrical, mechanical, and structural engineering matters, including all aspects of electrical safety, HVAC, power quality, fluid/utility systems, power monitoring, critical power reliability/redundancy issues, renovating rooms, modifying buildings and structural members, and developing new structures within and around the plutonium facility. Often in this role, engineers may perform engineering studies including short circuit, device coordination, equipment sizing, exterior lighting, fault current, arc flash for both medium and low voltage equipment, demolition, installation, upgrades, and repairs. Within this role, engineers will become familiar with pressure safety, leak testing requirements, piping supports, flow requirements, installing equipment on housekeeping pads or skids with the use of post-installed anchors, design cranes and crane girders/support structures, canopies, equipment support stands, piping/conduit supports, wall/floor/ceiling penetrations, and concrete slabs. **Nuclear Facilities Engineer 2 ($104,100 -$172,200)** In addition to the description above, engineers in this position will work alongside junior and senior engineers (e.g., fire protection, structural, mechanical, and electrical) and other peers in team settings to complete collaborative full-system design solutions through mentoring and leadership. **What You Need** **Minimum Job Requirements:** + Develops broad and/or unique knowledge with major commercial, industrial, or nuclear facility with a strong background in facility related systems (i.e. HVAC, Compressed Air). + Fundamental knowledge of design, operation, and maintenance of facility related mechanical systems. + Knowledge of trouble shooting mechanical systems. + Awareness of and demonstrated experience in application of codes and standards in a highly regulated work environment, to include but not limited to the IBC, IEBC, ASHRE, B31. + Demonstrated ability to perform analysis and calculations required to support engineered solutions. + Ability to effectively communicate engineering solutions both verbally and written with management, customers, peers, and maintenance personnel. **Increased knowledge and experience of the above in addition to the following are Requirements for Nuclear Facilities Engineer 2:** + Knowledge of and demonstrated ability to prepare and review technical reports and studies as part of establishing and maintaining Technical Baseline for new and existing facility structural systems. + Knowledge of and demonstrated ability to define and collect the usage, process, safety, and other requirements for the structure, system, or component design or analysis tasks, and prepare design concepts that meet the requirements. + Knowledge of and demonstrated ability to develop design details, design or analysis calculations, load studies, specifications, and special inspections that incorporate the applicable design requirements, including nuclear safety requirements, as applicable. + Knowledge and demonstrated experience evaluating and trending system health. + Demonstrated ability to interface and coordinate with other engineering disciplines and the customer during the development of the design as the Mechanical SME. + Demonstrated ability to mentor engineering interns and other engineers. **Education/Experience at lower level:** Position requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and 2 years of practical work experience necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired. **Education/Experience at higher level:** Position requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and a minimum of 3 years of practical work experience necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired. **Desired Qualifications:** + Experience with chilled water systems. + Experience with mechanical system computational software for mechanical systems (i.e., AFT Fathom/Arrow, Pipe Flow). + Experience with nuclear air handling system requirements. + Experience with mechanical system computational software for mechanical systems (i.e., Train Trace, Pipe Flow). + Experience as a mechanical engineer at a DOE non-reactor nuclear facility with a strong background in facility related mechanical systems (i.e. HVAC, Compressed Air). + Experience with the application of DOE Orders and Standards as related to facility systems. + Experience working within an ASME NQA-1 or similar quality program. **Essential Job Functions** (can perform with or without reasonable accommodation): General Physical Mobility, standing, walking, climbing stairs, bending. Specific Physical Mobility use of both hands, use of both arms, use of both legs, use of both feet, carry/lift up to 20 pounds. **Work Environment:** Work in a noisy environment, work near sources of ionizing and non-ionizing radiation, work near machinery with moving parts, working overtime or an irregular schedule. **Work Location:** This position will be physically located in Los Alamos, NM. All work locations are at the discretion of management. **Work Schedule:** This position may require 24/7 coverage, which could will involve working a shift/weekend schedule. Employees may be eligible for shift differential pay when assigned by their manager. Shift/weekend assignments are at the discretion of the manager. **Position commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** This position will be on-site work location in Los Alamos, NM. Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2. Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance: Q** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information. **HRP:** This position is subject to the requirements of the DOE Human Reliability Program as specified in 10 Code of Federal Regulation, Part 712, §712.11. These requirements include on going drug and alcohol testing, as well as periodic medical and psychological evaluations. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by applicable federal, state and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request a disability accommodation, email ****************** or call **************, opt. 3.

**What You Will Do** The Engineering Services Division of Los Alamos National Laboratory (LANL) develops, maintains, and applies a diverse set of engineering capabilities to provide innovative engineering solutions that enable the Laboratory's scientific and national security mission. This position is within the Engineering Services Division Office (ES-DO). ES Groups are responsible for implementing the Conduct of Engineering (COE) program at Los Alamos National Laboratory in support of systems, structure and component modifications and new installations. As well as supporting existing systems, modifications and customers occupying the facilities. As a System Electrical Engineer you will support the Weapons Facilities Operations (WFO) portfolio consisting of nuclear, accelerator and non-nuclear facilities, spanning half of the laboratory's footprint. As a facilities system engineer in this area, you will directly support facilities with a direct impact on LANL's stockpile stewardship mission. Daily tasks include but are not limited to response to emerging facility issues, configuration management including facility technical baseline management, electrical/pressure safety support, reviewing designs for facility modification and providing system health reporting. This position will be filled at either the Nuclear Facilities Engineer 3/4 level, depending on the skills and experience of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level. **System Electrical Engineer Level 3 ($125,200 - $211,300)** As a System Engineer with Engineering Services, you will serve as the owner's representative for engineering for your assigned facilities. You will concurrently interface with design teams, maintenance, and operations, shaping LANL's facilities and infrastructure to serve the needs of a growing and changing portfolio. The level 3 role includes the following job opportunities: Building Automation Systems Engineer Responsibilities: + Support WFO as the lead Building Automation Systems Engineer + Provide control and maintenance of the technical baseline of the facility equipment + Ensure that facility system configuration is being managed effectively using a risk-based graded approach + Follow the LANL Conduct of Engineering (CoE) Program in support of facility modifications and facility configuration management in accordance with the LANL Engineering Standards Manual (ESM), LANL Administrative Procedures (Aps), LANL Master Specifications, and related Codes and Standards + Review design outputs for impact to technical baseline and master equipment lists + Perform regular facility system walkdowns and Facility Health Reports + Control and maintain the master equipment list (MEL) for assigned facilities + Support configuration management Technical Knowledge: + Thorough knowledge of Controls + Thorough knowledge of sequence of operations + Source of expert knowledge of assigned facilities + Provide technical interface to existing facility systems and components Maintenance and Support: + Assist in defining maintenance requirements involving corrective maintenance and the tracking and trending of system performance + Provide information for preventative maintenance schedule + Mentor lower-level System Engineers + Review IWD's Automation Systems: + Automation Systems (ALC) **System Electrical Engineer 4 ($150,300 - $260,800)** In addition to the requirements outlined above, qualification at the higher level requires: Nuclear Facility Engineering Expertise: + Extensive knowledge and experience in nuclear facility engineering processes, maintenance techniques, work planning and control development, Quality, Safety Basis and other Nuclear Facility safety management programs + Demonstrated experience working with industry, regulatory, or Department of Energy/National Nuclear Security Administration (DOE/NNSA) complex codes, standards, and criteria pertinent to the nuclear facility engineering discipline + Expert knowledge of nuclear facility engineering principles and procedures, guides, and administrative practices Technical Baseline and Reporting: + Extensive knowledge of and demonstrated technical experience in preparing and reviewing technical reports and studies as part of establishing and maintaining Technical Baseline for new and existing facility structural systems + Extensive knowledge of and demonstrated technical experience in defining and collecting metrics on the usage, process, safety, and other parameters of interest for the structure, system, or components Design and Analysis: + Extensive knowledge of and demonstrated technical experience in defining or establishing design or analysis tasks and prepare design concepts that meet both the regulatory and performance requirements for systems and equipment + Extensive knowledge of and demonstrated technical experience in developing design details, design or analysis calculations, load studies, specifications, and special inspections that incorporate the applicable design requirements, including nuclear safety requirements, as applicable System Health Evaluation: + Extensive knowledge of and demonstrated technical experience in evaluating and trending system health Interdisciplinary Coordination and Mentoring: + Demonstrated ability to interface and coordinate with other engineering disciplines and the customer during the development of the design as the Electrical SME + Demonstrated ability to mentor engineering interns and other engineers **What You Need** **Minimum Job Requirements:** **Education/Experience for System Electrical Engineer 3:** Position requires a Bachelor's Degree in Electrical Engineering from an ABET-accredited college or university and a minimum of 6 years of practical work experience necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired. **Education/Experience for System Electrical Engineer 4:** Position requires a bachelor's degree in electrical engineering from an ABET-accredited college or university and a minimum of 12 years of practical work experience necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired. **Desired Qualifications:** + Electrical engineering degree and/or experience with facility electrical systems is strongly preferred + Completion of the Fundamentals of Engineering Exam + Design or operations experience in nuclear, accelerator or industrial facility operations + Experienced in producing designs utilizing AutoCAD and/or Revit tools and work processes + Knowledge of DOE, LANL Engineering Standards, and Conduct of Engineering principles and procedures + Knowledge of HVAC controls **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Position Commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China - including the special administrative regions of Hong Kong and Macau - as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance:** Q (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 (********************************************************************************************* for additional information. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular Position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy P701 ( *********************************************** for applicant eligibility requirements. **Incentive Compensation Program:** Position at the higher level is eligible to participate in the Triad Incentive Compensation Program. You must be in an eligible position for a minimum of 3 months, before July 1st and remain in an eligible position as of the end of the fiscal year, September 30th. The annual distribution is prorated based on the number of months in the eligible position. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by applicable federal, state and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request a disability accommodation, email ****************** or call **************, opt. 3.

**What You Will Do** The Engineering Services Division of Los Alamos National Laboratory (LANL) develops, maintains, and applies a diverse set of engineering capabilities to provide innovative engineering solutions that enable the Laboratory's scientific and national security mission. This position is within the Engineering Services Division Office (ES-DO). ES Groups are responsible for implementing the Conduct of Engineering (COE) program at Los Alamos National Laboratory in support of systems, structure and component modifications and new installations. As well as supporting existing systems, modifications and customers occupying the facilities. As a System Electrical Engineer you will support the Weapons Facilities Operations (WFO) portfolio consisting of nuclear, accelerator and non-nuclear facilities, spanning half of the laboratory's footprint. As a facilities system engineer in this area, you will directly support facilities with a direct impact on LANL's stockpile stewardship mission. Daily tasks include but are not limited to response to emerging facility issues, configuration management including facility technical baseline management, electrical/pressure safety support, reviewing designs for facility modification and providing system health reporting. This position will be filled at either the Nuclear Facilities Engineer 3/4 level, depending on the skills and experience of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level. **System Electrical Engineer Level 3 ($125,200 - $211,300)** As a System Engineer with Engineering Services, you will serve as the owner's representative for engineering for your assigned facilities. You will concurrently interface with design teams, maintenance, and operations, shaping LANL's facilities and infrastructure to serve the needs of a growing and changing portfolio. The level 3 role includes the following job opportunities: Electrical Safety Officer (ESO) Responsibilities: + Support WFO as the lead Electrical Safety Officer (ESO) + Conduct Arc-flash calculations + Thorough knowledge of NFPA 70E Facility Configuration and Equipment Management: + Provide control and maintenance of the technical baseline of the facility equipment + Ensures that facility system configuration is being managed effectively using a risk-based graded approach + Follow the LANL Conduct of Engineering (CoE) Program in support of facility modifications and facility configuration management in accordance with the LANL Engineering Standards Manual (ESM), LANL Administrative Procedures (Aps), LANL Master Specifications, and related Codes and Standards + Review design outputs for impact to technical baseline and master equipment lists + Control and maintain the master equipment list (MEL) for assigned facilities + Support configuration management Maintenance and System Performance: + Assist in defining maintenance requirements involving corrective maintenance and the tracking and trending of system performance + Provide information for preventative maintenance schedule + Perform regular facility system walkdowns and Facility Health Reports Coordination and Mentorship: + Coordinate with Pressure Safety Officer (PSO) on facility pressure safety systems + Mentor lower-level System Engineers + Provide technical interface to existing facility systems and components General Expertise: + Review IWD's + Source of expert knowledge of assigned facilities **System Electrical Engineer 4 ($150,300 - $260,800)** In Addition to the requirements outlined above, qualification at the higher level requires: Nuclear Facility Engineering Expertise: + Extensive knowledge and experience in nuclear facility engineering processes, maintenance techniques, work planning and control development, Quality, Safety Basis and other Nuclear Facility safety management programs + Demonstrated experience working with industry, regulatory, or Department of Energy/National Nuclear Security Administration (DOE/NNSA) complex codes, standards, and criteria pertinent to the nuclear facility engineering discipline + Expert knowledge of nuclear facility engineering principles and procedures, guides, and administrative practices Technical Baseline and Reporting: + Extensive knowledge of and demonstrated technical experience in preparing and reviewing technical reports and studies as part of establishing and maintaining Technical Baseline for new and existing facility structural systems + Extensive knowledge of and demonstrated technical experience in defining and collecting metrics on the usage, process, safety, and other parameters of interest for the structure, system, or components Design and Analysis: + Extensive knowledge of and demonstrated technical experience in defining or establishing design or analysis tasks and prepare design concepts that meet both the regulatory and performance requirements for systems and equipment + Extensive knowledge of and demonstrated technical experience in developing design details, design or analysis calculations, load studies, specifications, and special inspections that incorporate the applicable design requirements, including nuclear safety requirements, as applicable System Health and Evaluation: + Extensive knowledge of and demonstrated technical experience in evaluating and trending system health Interdisciplinary Coordination and Mentorship: + Demonstrated ability to interface and coordinate with other engineering disciplines and the customer during the development of the design as the Electrical SME + Demonstrated ability to mentor engineering interns and other engineers **What You Need** **Minimum Job Requirements:** **Education/Experience for Electrical System Engineer 3:** Position requires a Bachelor's Degree in Mechanical Engineering from an ABET-accredited college or university and a minimum of 6 years of practical work experience necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired. **Education/Experience for Electrical System Engineer 4:** Position requires a bachelor's degree in mechanical engineering from an ABET-accredited college or university and a minimum of 12 years of practical work experience necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired. **Desired Qualifications:** + Electrical engineering degree and/or experience with facility electrical systems is strongly preferred + Completion of the Fundamentals of Engineering Exam + Design or operations experience in nuclear, accelerator or industrial facility operations + Experienced in producing designs utilizing AutoCAD and/or Revit tools and work processes + Knowledge of DOE, LANL Engineering Standards, and Conduct of Engineering principles and procedures **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Position Commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China - including the special administrative regions of Hong Kong and Macau - as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance:** Q (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 ( ********************************************************************************************* for additional information. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular Position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy P701 (*********************************************** for applicant eligibility requirements. **Incentive Compensation Program:** Position at the higher level is eligible to participate in the Triad Incentive Compensation Program. You must be in an eligible position for a minimum of 3 months, before July 1st and remain in an eligible position as of the end of the fiscal year, September 30th. The annual distribution is prorated based on the number of months in the eligible position. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by applicable federal, state and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request a disability accommodation, email ****************** or call **************, opt. 3.

**What You Will Do** Are you an early to mid-career electrical engineer looking to take on high-impact, real-world challenges? At Los Alamos National Laboratory (LANL), you'll be part of a team responsible for maintaining and enhancing our primary electrical transmission (115kV) and distribution (13.8kV) system, powering one of the nation's most vital research institutions. This is a chance to work with cutting-edge technology, contribute to national security, and develop your expertise in high-voltage systems while enjoying an outstanding work-life balance in beautiful northern New Mexico. This position will be filled at either the Engineer 2 or 3 level, depending on the skills and experience of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level. **Engineer 2 ($104,100 - $172,200)** As a Utility Electrical System Engineer, you'll play a key role in managing and maintaining LANL's high-voltage electrical infrastructure. Your responsibilities will include: Power System Engineering & Design + Perform power system studies (Short Circuit, Coordination, Arc Flash, Load Flow) for high (115kV), medium (13.2kV), and low voltage equipment + Design and implement electrical solutions to enhance system reliability, safety, and performance + Develop detailed designs, calculations, and specifications for utility and facility projects Operations, Maintenance & Compliance + Support preventive and corrective maintenance for substations, transmission/distribution lines, and switchgear + Ensure compliance with national standards (NESC, NEC, IEEE, NFPA 70E, OSHA) + Work closely with PNM and Los Alamos County on Bulk Electric System (BES) planning, operations, and maintenance Project Leadership & Stakeholder Collaboration + Provide technical expertise and leadership on LANL projects, ensuring safe, high-quality, and reliable power delivery + Collaborate across multiple teams, including safety specialists, utility operators, and project managers + Develop and refine the Utility Health Report, identifying key investment areas for future improvements Innovation & Problem-Solving + Evaluate complex electrical challenges, identify risks, and develop creative solutions + Provide insights on electrical safety, power quality, system protection, and reliability improvements **Engineer 3 ($114,700 - $191,200)** Additional Responsibilities at the Engineer 3 Level: + Act as an Electrical Safety Officer (ESO), conducting risk and hazard assessments + Lead technical discussions, mentor junior engineers, and drive process improvements + Manage long-term operational and strategic planning for utility reinvestment and asset management **What You Need** We're looking for an innovative, problem-solving engineer who's ready to grow their career and take on exciting challenges. **Minimum Job Requirements:** + Hands-on experience with power system analysis tools like SKM or ETAP + Familiarity with transmission and distribution system protection, SCADA systems, RTUs, or other operational technology (OT) hardware + Knowledge of industry standards (NESC, NEC, IEEE, NFPA 70E, NERC) + Experience in preventive maintenance programs, load flow modeling (PSLF), and GIS platforms (ArcFM) + Ability to manage complex projects, schedules, and resources effectively + Leadership or mentoring experience in a team-oriented, high-impact environment **Education/Experience at Engineer 2:** Position requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and a minimum of 3 years practical work experience to the degree necessary to perform the responsibilities outlined above.Bachelor's in Engineering (ABET-accredited) + 3 years relevant experience. Current registration as an Engineer-in-Training (EIT) is highly desirable. **Education/Experience at Engineer 3:** Position requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and a minimum of 6 years practical work experience to the degree necessary to perform the responsibilities outlined above. Advanced engineering or technical degree is highly desired. Current registration as a Professional Engineer (PE) is highly desirable. **Desired Qualifications:** + Professional Engineering (PE) License + Hands-on experience with SEL relays, NFPA 70B electrical system testing, and DOE standards + Familiarity with LANL engineering processes and procedures **Work Location:** The work location for this position is hybrid and is located in Los Alamos, NM. Hybrid is defined as working partially onsite/partially offsite but within 2 hours ground commute of this location. All work locations are at the discretion of management and can change at any time with appropriate notice. **Position Commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China - including the special administrative regions of Hong Kong and Macau - as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. If you're an ambitious electrical engineer ready to tackle large-scale power system challenges, we'd love to hear from you! Apply today and be part of a team that's making a real difference. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid maternity and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Detail** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance:** Q (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 (********************************************************************************************* for additional information. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular Position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy P701 (*********************************************** for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by applicable federal, state and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request a disability accommodation, email ****************** or call **************, opt. 3.

**What You Will Do** **This position will be filled at either Nuclear Facilities Engineer 1 or 2, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.** The Plutonium Facilities Engineering Division (PFE-DO) and Auxiliary Systems (PFE-AUX ) at Los Alamos National Laboratory (LANL) are seeking an Electrical System Engineer specializing in low voltage systems, and instrumentation & controls. Put your engineering talents to good use by joining our world-class Engineering team! Our workforce thrives in an environment that values creativity and problem solving, where every idea and perspective is welcomed. This is your chance to make a real difference while working on important systems directly impacting national security. **Nuclear Facilities Engineer 1 $94,500 - $154,600** Within this job, the successful candidate will have to opportunity to support the Laboratory's mission by serving as the subject matter expert for nuclear facility electrical engineering matters, including all aspects of electrical safety, power quality, power monitoring, critical power reliability/redundancy issues, modifying buildings, and developing new structures and equipment within and around the plutonium facility. Often in this role, engineers may perform engineering studies including short circuit, device coordination, equipment sizing, exterior lighting, fault current, arc flash for both medium and low voltage equipment, demolition, installation, upgrades, and repairs. Additionally successful candidates may be expected to qualify as a Cognitive System Engineer (CSE) on one or more Vital Safety Systems (VSS) that support LANL Nuclear Facilities. The position is intended to be filled by those who specialize in low voltage systems, and instrumentation & controls. **Nuclear Facilities Engineer 2 $104,100 - $172,200** In addition to the description above, engineers in this position will work alongside junior and senior engineers (e.g., fire protection, structural, mechanical, and electrical) and other peers in team settings to complete collaborative full-system design solutions through mentoring and leadership. The position is intended to be filled by those who specialize in low voltage systems, and instrumentation & controls. **What You Need** **Minimum Job Requirements:** + Awareness of engineering work, planning, construction, control methods, and project/process engineering/management practices. + Awareness of industry, regulatory, or national codes and standards, engineering principles and procedures, design guides, appropriate standards, and administrative practices. + Knowledge of analysis and calculations techniques to support engineered solutions. + Ability to effectively communicate engineering solutions both verbally and written with management, customers, peers, and maintenance personnel. + Working knowledge of Microsoft software products (i.e. Word, Excel, Microsoft Teams, Outlook, etc.) **Additional Job Requirements for Nuclear Facilities Engineer 2:** + Knowledge of engineering work, planning, construction, control methods, and project/process engineering/management practices. + Demonstrated experience assisting with preparing technical reports and studies as part of establishing and maintaining Technical Baseline for new and existing facility structural systems. + Demonstrated experience assisting with collection of the usage, process, safety, and other parameters of interest for the structure, system, or component. + Demonstrated experience assisting with design or analysis tasks, and preparation of design concepts that meet the requirements. + Demonstrated experience assisting with developing design details, design or analysis calculations, load studies, specifications, and special inspections that incorporate the applicable design requirements, as applicable. + Demonstrated experience assisting with evaluating and trending system health. + Demonstrated experience interfacing and coordinating with other engineering disciplines and the customer during the development of the design. + Demonstrated ability to communicate well, both written and verbally. Training/Certifications: Current registration as an Engineer-in-Training (EIT) is highly desirable. **Education/Experience at Nuclear Facilities Engineer 1** : Position requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and a minimum of 3 years practical work experience to the degree necessary to perform the responsibilities outlined above. Electrical engineering degree is highly desired. **Education/Experience at Nuclear Facilities Engineer 2** : Position requires a Bachelor's Degree in Engineering from an ABET-accredited college or university and a minimum of 6 years practical work experience to the degree necessary to perform the responsibilities outlined above. Advanced electrical engineering or technical degree is highly desired. **Desired Qualifications:** + Knowledge of controls related to equipment operation such as PLCs and relay control. + Knowledge of low voltage electrical systems as they relate to commercial, industrial, or nuclear facilities. + Knowledge of the engineering design process and/or maintenance of low voltage systems. + Knowledge of the engineering design process and/or maintenance of instrumentation & control systems. + Knowledge of codes and standards, to include but not limited to NQA-1, ISA, IBC, IEBC, NFPA 70, NFPA 70E, IEEE, and NFPA 780. + Experience with supporting safety analyses and hazards evaluations. + Experience in the use of SKM software. + Familiarity with LANL engineering processes and procedures. Work Environment: work in a noisy environment, work near sources of ionizing and non-ionizing radiation, work near machinery with moving parts, working overtime or an irregular schedule. Work Location: The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. Position commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Essential Job Functions (can perform with or without reasonable accommodation): General Physical Mobility, standing, walking, climbing stairs, bending. Specific Physical Mobility use of both hands, use of both arms, use of both legs, use of both feet, carry/lift up to 20 pounds. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: § PPO or High Deductible medical insurance with the same large nationwide network § Dental and vision insurance § Free basic life and disability insurance § Paid childbirth and parental leave § Award-winning 401(k) (6% matching plus 3.5% annually) § Learning opportunities and tuition assistance § Flexible schedules and time off (PTO and holidays) § Onsite gyms and wellness programs § Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 (******************************************************************** . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A. **Clearance** **: Q** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 (********************************************************************************************* for additional information. **HRP:** This position is subject to the requirements of the DOE Human Reliability Program as specified in 10 Code of Federal Regulation, Part 712, §712.11. These requirements include on going drug and alcohol testing, as well as periodic medical and psychological evaluations. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 (*********************************************** for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer. All employment practices are based on qualification and merit, without regard to protected categories such as race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal, state, and local laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** opt. 3.

Project Engineer, Commissioning Services Employees can work remotely Full-time Are you our new Commissioning Engineer? Do you want to push the boundaries of your profession and develop your excellence in an open, collaborative and empowering culture? If this sounds like you, or you're curious to learn more, then this role could be the perfect opportunity. Join our Energy as our new Commissioning Engineer and work with us to close the gap to a sustainable future. Job Description Your new role As our new Commissioning Engineer, you will join a global company that has been growing successfully since its founding in 1945. Together, we lead and leave a positive impact on societies, companies and people around the world. As our new Commissioning Engineer you will be part of our Advanced Manufacturing Department, consisting of many process engineers, project and construction managers, involved in the design, construction, start-up, commissioning, and testing of process and building systems / equipment. Your key responsibilities will be: * Read, process and understand complex project design, specification and submittal documents. * Preparation and execution of commissioning documents using both cloud based commissioning software and traditional word processing software for the coordination of commission activities and issues identification, tracking, and resolution support. * Lead commissioning execution at client sites and Ramboll advanced manufacturing facilities. * Provide engineering and technical support to projects; to include writing reports, conducting audits, troubleshooting, performing tests to ensure client specifications are met. * Maintain client relationships by presenting a professional and competent demeanor; ensure clients best interests are kept at the forefront. * Travel to/from client sites to ensure adherence to schedule, scope, and budget. * Properly record and document information needed for client acceptance and historical reference. * Training maintenance and operative staff where appropriate on equipment. Your new team You will be part of Energy division, Ramboll is at the forefront of addressing the green transition and offers a holistic approach to energy that supports the sector on the journey towards more sustainable solutions. With 1,800 experts in 14 countries, covering the full spectrum of technologies and all parts of the value chain from production and transmission to distribution, we plan, design and implement energy solutions all over the world.. Qualifications About you From the moment you start at Ramboll, we will support your personal and professional development so that you can continue to grow with the company. While we look forward to supporting your continued learning and development, for this role we have identified some qualifications, skills, and capabilities that will set you up for success. These include: * Bachelor's Degree in Mechanical or Electrical Engineering (or equivalent) and 8 or more years of relevant experience in successful execution of commissioning building systems and equipment. for industrial and municipal projects. * Experience with Programmable Logic control systems, process instrumentation and motor controls preferred. * Experience with electrical power distribution equipment. * Proficient with Microsoft Office (Excel, Word, etc.) * Strong Communication Skills with the ability to work with a diverse group of project stakeholders. * Construction or facilities background is a plus * .Experience with Microsoft Project is a plus. * ASHRAE or LEED Certification a plus * OSHA 10/30hr a plus * 30%+ travel, valid driver's license required What we can offer you * Investment in your development * Leaders you can count on, guided by our Leadership Principles * Be valued for the unique person you are * Never be short of inspiration from colleagues, clients, and projects * The long-term thinking of a foundation-owned company Additional Information Work at the heart of sustainable change Ramboll is a global architecture, engineering, and consultancy company. We believe that the purpose of sustainable change is to create a thriving world for both nature and people. So, that's where we start - and how we work. At Ramboll, our core strength is our people, and our history is rooted in a clear vision of how a responsible company should act. Being open and curious is a cornerstone of our culture. We embrace an inclusive mindset that looks for fresh, diverse, and innovative perspectives. We respect, embrace, and invite diversity in all forms to actively cultivate an environment where everyone can flourish and realize their full potential. Ready to join us? Please submit your application. Be sure to include all relevant documents including your CV, cover letter, etc. Thank you for taking the time to apply! We look forward to receiving your application. Ramboll in the Americas Founded in Denmark, Ramboll is a foundation-owned people company. Ramboll has thousands of experts working across more than 70 offices in the Americas, delivering innovative solutions within Environment & Health, Water, Energy, and Planning & Urban Design. We invite you to contribute to a sustainable future working in an open, collaborative, and empowering company. Combining local experience with global knowledge, we together shape the societies of tomorrow. Where People Flourish Our mission is to create sustainable societies where people and nature flourish. This means that a culture of inclusion is embedded in everything we do. Our people bring diverse backgrounds and experiences to the company, enabling us to deliver innovative and forward-thinking solutions to our clients. We also know how important it is to achieve the right balance of where, when, and how much you work. At Ramboll, we offer flexibility as part of our positive and inclusive approach to work. We are committed to equal employment opportunity, regardless of age, disability or medical condition, gender identity, marriage and domestic partnership, pregnancy and maternity, race, ancestry, or national origin, religion or belief, sex and sexual orientation, military service and veteran status, or any other protected characteristic. Ramboll wants to ensure opportunities are accessible to candidates with disabilities. So, please let us know if there are any changes we could make to the application process to make it more comfortable for you. You can contact us at job.advert.accessibility@ramboll.com with such requests. Salary Transparency Our compensation reflects the cost of labor across several U.S. geographic markets, and we pay differently based on those defined markets. The U.S. pay range for this position is $96,000-$120,000 annually and does not include bonuses, overtime or other forms of compensation or benefits. Pay within this range varies by work location and may also depend on job-related knowledge, skills, and experience. Your recruiter can share more about the specific salary range for the job location during the hiring process. All your information will be kept confidential according to EEO guidelines.

**What You Will Do** We are seeking an Information System Security Officer (ISSO) to support the cybersecurity program for information system boundaries accredited within Amazon Web Services (AWS) on the Commercial Cloud Enterprise (C2E) platform. The ISSO will contribute to a portfolio of exciting and high-impact national security scientific research. In this role, you will collaborate with interdisciplinary teams to design secure, high-performance computing solutions that drive world-class scientific outcomes for our stakeholders. The Special Security IT and Cyber Operations group (SSO-3) is an integral part of the Sensitive and Special Operations (SSO) Division at Los Alamos National Laboratory (LANL), focusing on implementation of IT and network technologies for high security environments. The SSO Division is responsible for the operation of special security facilities at LANL and remote sites, enabling cutting-edge work in Emerging Threats, Energy Security, and Nuclear Threats and Deterrence. Our dedicated teams architect and implement secure computing environments used to tackle the nation's toughest challenges in global and nuclear security. As a member of the Special Security Cyber Operations Team, your responsibilities will include: + Assisting the ISSM in development, implementation, and evaluation of the cybersecurity program for classified computing systems within the LANL Field Intelligence Element (FIE). + Participating in or leading projects that address significant and/or complex cyber issues, working with multi-disciplinary teams to analyze and interpret national cybersecurity requirements in support of scientific research. + Identifying, developing, and implementing solutions to address cyber threats and vulnerabilities. + Evaluating and recommending new tools to strengthen the FIE's cybersecurity posture. + Contributing to security reviews, assessments, security plan development, and related documentation for classified systems. Additional Responsibilities include: + Serving as primary or alternate ISSO for the Department of Energy's Office of Intelligence and Counterintelligence (DOE-IN) for Strategic Partner information systems. + Implementing the National Institute of Standards and Technology (NIST) Risk Management Framework (RMF), in accordance with Intelligence Community Directive (ICD) 503, the Committee for National Security Systems publications, and NIST Special Publications (SP) 800 series. + Performing continuous monitoring activities in support of ongoing authorizations and maintaining effective monitoring of security controls. This includes risk assessments, self-assessments, account management, configuration management, vulnerability management, and auditing of information systems. + Developing and maintaining authorization packages, including System Security Plans (SSPs), Plans of Actions and Milestones (POA&Ms), and Security Assessment Reports (SARs). + Supporting secure system deployment and operations in AWS Classified Regions (Secret and Top Secret). **What You Need** **Minimum Job Requirements:** + Proficiency in the implementation of the NIST RMF for national security systems in accordance with all applicable NIST publications, DOE orders, DOE-IN policies, ICDs, and other government agency governing requirements. + Hands-on experience with AWS Commercial Cloud Enterprise (C2E) environments and AWS security services such as IAM, GuardDuty, CloudTrail, and KMS. Candidates must have prior cyber-related work experience within AWS environments. + Understanding of distributed systems, architectures, and network protocols. + Experience developing and maintaining comprehensive authorization packages. + Strong technical writing abilities and effective stakeholder communication skills. **Education/Experience:** Position requires a Bachelor's degree in a technical field and a minimum of 5 years' related experience, or an equivalent combination of education and experience. At this level post graduate work may be expected. **Desired Qualifications:** + Master's Degree in cybersecurity, information assurance, or related technical field. + Active Q or Top-Secret clearance. + Active Sensitive Compartmented Information (SCI) access (or ability to obtain). + DoDD 8570 IAM Level 1, or equivalent certification. Cloud+ preferred. + Experience in SCI or Special Access Program (SAP) environments. + Knowledge of DOE/DoD cybersecurity policies. **Work Environment:** **Work Location:** The work location for this position is onsite and located in Los Alamos, NM. All work locations are at the discretion of management. **Position commitment:** Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year. **Note to Applicants:** Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. **Where You Will Work** Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes: + PPO or High Deductible medical insurance with the same large nationwide network + Dental and vision insurance + Free basic life and disability insurance + Paid childbirth and parental leave + Award-winning 401(k) (6% matching plus 3.5% annually) + Learning opportunities and tuition assistance + Flexible schedules and time off (PTO and holidays) + Onsite gyms and wellness programs + Extensive relocation packages (outside a 50 mile radius) **Additional Details** **Directive 206.2** -Located **Clearance:** **Q/SCI** (Position will be cleared to this level). Selected applicants will be subject to a background investigation conducted by or on behalf of the Federal Government, and must meet eligibility requirements* for access to classified matter. This position requires a Q clearance. and obtaining such clearance requires US Citizenship except in extremely rare circumstances. Dependent upon the position, additional authorization to access classified information may be required, which may or may not be available to dual citizens. Receipt of a Q clearance and additional access authorization ultimately is a decision of the Federal Government and not of Triad. *Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. See DOE Order 472.2 for additional information. **New-Employment Drug Test:** The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing. Although New Mexico and other states have legalized the use of marijuana, use and possession of marijuana remain illegal under federal law. A positive drug test for marijuana will result in termination of employment, even if the use was pre-offer. **Regular position:** Term status Laboratory employees applying for regular-status positions are converted to regular status. Term position: Regular-status Laboratory employees applying for term-status positions may retain regular status with approval of the cognizant Principle Associate Director. **Internal Applicants:** Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to Policy Policy P701 for applicant eligibility requirements. **Equal Opportunity:** Los Alamos National Laboratory is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regard to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to ****************** or call ************** option 3.

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like Are you looking for an opportunity to contribute to a highly motivated team focused on delivering qualified electronic components to a national security mission? The Advanced RF ICs and Microsystems department (5255) seeks an R&D Microwave and Sensor Engineer to design, fabricate, test, qualify, and deliver custom-designed microwave components. These components enable military communication systems, SAR imaging, doppler radar, and tagging, tracking, and locating hardware. Our team seeks a driven RF engineer capable of fundamental electromagnetic modeling, transistor-level circuit simulation, and distributed element microwave PCB design. It is also important for the candidate to understand electronic die characterization, RF test equipment, solder assembly, PCB development, and fabrication. On any given day, you may be called on to: * Use circuit modeling tools to design analog or RF integrated circuit components for transceivers. * Use circuit and electromagnetic modeling tools to design high sensitivity radio frequency components. * Run Monte Carlo simulations over voltage, temperature, and process corners * Model active circuit components: AC, Transient, Harmonic Balance, EM * Characterize RF components and modules over extreme environmental stresses. * Troubleshoot analog or RF circuits in a modern, well-equipped electronics lab * Use of electronic equipment to measure slew rate, gain, stability, phase noise, jitter, s-parameters, power output, P1dB, PSat, noise figure, modulation quality (EVM), or sensitivity. * Ability to effectively collaborate with technologists and engineers to test and characterize new devices in a variety of technology nodes/processes. * Team to design, prototype, analyze, and evaluate microsystems that achieve increased performances. * Communicate results and findings to co-workers and potential customers. * Identify, develop, and pursue new technology opportunities in areas that support Sandia mission activities. * Contribute to several areas ranging from fundamental semiconductor devices, through circuit and components, and up to sub-system architecture. The selected applicant can work a combination of onsite and offsite work. The selected applicant must live within a reasonable distance for commuting to the assigned work location when necessary. Salary Range $99,400 - $193,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * Ability to obtain and maintain a DOE Q-level security clearance. Qualifications We Desire The ideal R&D Microwave & Sensor Engineer candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Laboratory skills and knowledge of RF and digital test equipment. * Knowledge of RF, Digital Communications, Electronic Warfare, and Cyber Security systems and principles. * Ability to work successfully in a dynamic, interdisciplinary, teaming environment. Also, for this posting we are seeking individuals with the following experience: * Experience with nano- or micro-scale, semiconductor device technologies. * RF or high-speed integrated circuit design using Cadence Virtuoso, Synopsis, or Siemens products. * Use of RF test equipment such as spectrum analyzers, vector network analyzers, pulsed signal generators, oscilloscopes, and precision power supplies. * Electrical test and measure practices to protect sensitive devices and equipment to troubleshooting high frequency circuitry . * Understanding of electronic die characterization, RF test equipment, working knowledge of solder assembly, PCB development and fabrication. * Adaptability and flexibility to address rapidly advancing technologies and evolving customer needs. * Proficiency with software for data analysis and instrument control in C#, LabVIEW, MATLAB, or Python. * Familiarity with microscale packaging and integration techniques as well as approaches for microsystem rapid prototyping and integration. * Design and characterization of analog, high-speed digital, RF, or microwave devices or circuits. * Microelectronics realization including requirements definition, device behavior, circuit design, mask layout, fabrication, testing, and documentation. * Recent Laboratory test and measurement of analog and RF components using tools such as high-speed oscilloscopes, network analyzers, parameter analyzers, and probe stations. * Experience with/in: Analog and RF modeling using commercially available simulation tools in semiconductor, electromagnetic, and/or circuit design using Cadence, Mentor Graphics, EMX. * Strong oral, written, and technical writing skills to provide sponsors and vendors convincing evidence of quality designs. * LabVIEW, MATLAB, and C++ programming experience. * Active DOD TS or DOE Q level clearance. About Our Team The Advance RF ICs and Microsystems department performs research, design, modeling, characterization, and qualification of RF microelectronics. We have a focus on efficient, high performance RF component design, electromagnetic modeling, as well as novel wireless sensor development. We have capabilities for developing between prototypes to fully qualified hardware. We provide unique solutions to our customers in nuclear weapons, DoD, non-proliferation agencies, and subsystem departments (SAR, surety, & ISR). Our research interests include advanced RF sensors, low power communication devices, quantum computing electromagnetics, advanced radar component design, and next generation resonators for clocks unique to national security applications. Join this team to make a difference for our nation and work toward your individual goals. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like We are seeking a highly motivated Product Engineer to join our Explosive Component Production team within the Explosive Technologies Group at Sandia National Laboratories. This department is responsible for the Production of explosive components, including detonators, ignitors, actuators, and other explosive components, in support of the Nuclear Deterrence mission. On any given day, you may be called on to: * Manage product definition (graphic drawings and specifications) for explosive components under development or in production * Collaborate with engineers, technologists, and project management to stand up and qualify new production capabilities for explosive components * Work with external suppliers to produce development or Mark Quality product * Engage in hands-on work in a laboratory environment, ensuring adherence to safety protocols and best practices. * Ensure product quality and design intent through technical oversight, defect investigations, and root cause analyses. * Drive continuous improvement initiatives to enhance key Production metrics. * Design and develop processes for product manufacturing, including planning sequences of operations and specifying procedures for material transformation. * Conduct tests and measurements throughout production stages to maintain control over process and product variables. * Utilize systematic problem-solving methods to drive process understanding and improvements. Occasional travel may be required. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $102,400 - $199,700 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development * Active DOE Q clearance, or equivalent is required to start Qualifications We Desire The ideal R&D S&E Mechanical Engineer candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Mechanical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation). * Experience with mechanical engineering and product realization in the NNSA complex * Strong verbal and written communication skills, ability to work effectively in multidisciplinary teams. Also, for this posting we are seeking individuals with the following experience: * Experience interfacing with and participating in Product Realization Teams * Experience with: * Working in a high-quality production environment applying rigorous processes * Installation, qualification, and maintenance of manufacturing process equipment * Methods such as resistance welding, laser welding, leak checking, visual inspection, vacuum systems, and metrology * Glass-to-metal sealing in a furnace and machining metals, glass, and ceramics * With hazardous operations and a commitment to safety in an explosives facility * Ability to: * Develop, maintain, and improve manufacturing processes, including developing fixtures and tooling * Analyze data and apply the analysis to decision-making * Knowledge of lean manufacturing principles and statistical process control * Familiarity with engineering drawings, including Geometric Dimensioning and Tolerancing (GD&T) About Our Team Department 7452, Explosive Component Production, is part of the Explosive Technologies Group (7450) and serves as the Production Agency (PA) for explosive components. Our team is responsible for the production of explosive components that support Life Extension Programs (LEPs), Alterations (ALTs), Legacy systems, and New Systems. We collaborate closely with both external suppliers and internal production floors to ensure the highest quality and efficiency in our operations. Our team plays a critical role in supporting the Nuclear Deterrence mission by ensuring the safe and efficient production of explosive components. We are dedicated to fostering a culture of safety, collaboration, and innovation, where every team member is valued and empowered to contribute to our mission. Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Position requires a Department of Energy (DOE) Q security clearance to start, or equivalent active security clearance with another U.S. government agency (e.g., DOD). Sandia is required by DOE directive to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

About Sandia Sandia National Laboratories is the nation's premier science and engineering lab for national security and technology innovation, with teams of specialists focused on cutting-edge work in a broad array of areas. Some of the main reasons we love our jobs: * Challenging work with amazing impact that contributes to security, peace, and freedom worldwide * Extraordinary co-workers * Some of the best tools, equipment, and research facilities in the world * Career advancement and enrichment opportunities * Flexible work arrangements for many positions include 9/80 (work 80 hours every two weeks, with every other Friday off) and 4/10 (work 4 ten-hour days each week) compressed workweeks, part-time work, and telecommuting (a mix of onsite work and working from home) * Generous vacation, strong medical and other benefits, competitive 401k, learning opportunities, relocation assistance and amenities aimed at creating a solid work/life balance* World-changing technologies. Life-changing careers. Learn more about Sandia at: ********************* * These benefits vary by job classification. What Your Job Will Be Like Are you passionate about Electrical Engineering and eager to utilize state-of-the-art facilities to tackle ambitious challenges related to national security? We are seeking multiple Electrical Engineers with experience in analog or digital circuit design to join our teams. The selected applicants will be responsible for designing, developing, testing, qualifying, and monitoring firing subsystems and other high-consequence embedded systems that are used daily in U.S. Navy and U.S. Air Force nuclear weapons programs, as well as other national security programs. On any given day, one may be called upon to: * Collaborate on multidisciplinary teams, providing ownership and direction for electrical designs. * Coordinate with customers, production agencies, and stakeholders to support design, testing, development, qualification, and production activities * Analyze performance against requirements, build prototypes, and refine designs * Perform modeling and simulation of design performance using tools such as Pspice, LTspice and MATLAB/Simulink * Communicate technical information and project status effectively to team members, customers, and management Applicants on this requisition may be interviewed by multiple organizations at Sandia National Laboratories. Travel to partner and customer locations as required (generally less than 5 days per month). Applicants chosen for an interview will be asked to provide an overview briefing of an example that illustrates relevant design experience. Due to the nature of the work, the selected applicant must be able to work onsite. Salary Range $99,400 - $193,600 * Salary range is estimated, and actual salary will be determined after consideration of the selected candidate's experience and qualifications, and application of any approved geographic salary differential. Qualifications We Require * A Bachelor's degree in a relevant discipline, or an equivalent combination of directly relevant education and engineering or scientific experience that demonstrates the knowledge, skills, and ability to perform independent research and development. * Ability to obtain and maintain a DOE Q clearance * Ability to obtain and maintain Sigma 15 access Qualifications We Desire The ideal R&D S&E Electrical Engineer candidate for Sandia National Laboratories will in addition possess the following: * Graduate degree in Electrical Engineering or a highly related field where an independent research project was a graduation requirement (e.g., independent project, thesis, or dissertation) * Ability to work independently and collaborate well in a multidisciplinary team of designers and test engineers * Outstanding verbal and written skills, including the ability to develop and present briefings that are clear and compelling Also, for this posting we are seeking individuals with the following experience: * Experience with high voltage electronics * The ability to acquire and maintain qualifications for working safely with high voltage electronics * Experience working in Nuclear Deterrence mission spaces including design, development, production, or surveillance * Experience working in a production or manufacturing environment * Demonstrated attention to detail * An active DOE Q-level security clearance; or other equivalent active security clearance such as DOD Top Secret with CNWDI About Our Team The Firing & Embedded Systems group (7620) is a recognized leader in realizing safe, secure, and reliable products. We research, design, develop, and deliver highly reliable, trusted systems and high consequence hardware and software products to serve our National Security customers today, tomorrow, and always. Our technical backgrounds are diverse. Some of us have spent years focusing on the fine details of particular technologies and are recognized as nation-level specialists. Some of us are generalists and support multiple projects keeping things connected and developing new skills. Our teams are comprised of specialists and generalists working together, and it is easy to shift between projects and technical roles over time. If this environment sounds appealing, we d like to meet you! Posting Duration This posting will be open for application submissions for a minimum of seven (7) calendar days, including the 'posting date'. Sandia reserves the right to extend the posting date at any time. Security Clearance Sandia is required by DOE to conduct a pre-employment drug test and background review that includes checks of personal references, credit, law enforcement records, and employment/education verifications. Applicants for employment need to be able to obtain and maintain a DOE Q-level security clearance, which requires U.S. citizenship. If you hold more than one citizenship (i.e., of the U.S. and another country), your ability to obtain a security clearance may be impacted. Applicants offered employment with Sandia are subject to a federal background investigation to meet the requirements for access to classified information or matter if the duties of the position require a DOE security clearance. Substance abuse or illegal drug use, falsification of information, criminal activity, serious misconduct or other indicators of untrustworthiness can cause a clearance to be denied or terminated by DOE, resulting in the inability to perform the duties assigned and subsequent termination of employment. EEO All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status and any other protected class under state or federal law. NNSA Requirements for MedPEDs If you have a Medical Portable Electronic Device (MedPED), such as a pacemaker, defibrillator, drug-releasing pump, hearing aids, or diagnostic equipment and other equipment for measuring, monitoring, and recording body functions such as heartbeat and brain waves, if employed by Sandia National Laboratories you may be required to comply with NNSA security requirements for MedPEDs. If you have a MedPED and you are selected for an on-site interview at Sandia National Laboratories, there may be additional steps necessary to ensure compliance with NNSA security requirements prior to the interview date. Apply for Job * Careers * Sign In * New User

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. Information Systems and Cyber Division (ISCD) staff couple the latest in information system technologies, such as elastic compute clouds, containerization, microservices, real-time operating systems, and visualization frameworks, with expertise in cyber security, software architecture, software engineering, data science, Artificial Intelligence, process improvement, and software development to deliver responsive, resilient, high-performance software intensive systems to our IC, DoD, and civilian customers. Aerospace's Cyber Security and Advanced Platforms Subdivision, Advanced Cryptographic Capabilities Department is seeking a Communication/System Security/Crypto Engineer to help design, implement, assess and deploy data-in-transit solutions that defend our nation's most valuable assets in space. We are seeking a highly motivated Communication/System Security/Crypto Project Engineer | Senior Project Engineer with a desire to support customers across a full spectrum of system security, crypto, and communications system activities. This is a full-time position based in Albuquerque and Kirtland AFB, New Mexico, which is 100%onsite. What You'll Be Doing Provide direct engineering support primarily to the Space Rapid Capabilities Office. Additional support may occasionally be requested for Space Systems Command, Air Force Research Lab and Space Development Agency customers. Advise government customers and their program contractors on cryptographic capability design and implementation. Perform research and technical assessments in areas of cryptography, network security, cybersecurity, communications integration. Review and develop technical designs, Concept of Operations (CONOPs), system test plans, technical documentation and provide feedback and guidance in both oral and written form. Develop technical information for ground and space systems to include integration of cryptographic hardware, system security controls, long-haul communications, securing data-in-transit. Communicate with multiple government agencies, contractors, and vendors to develop new cryptographic, system security, and communications technologies . Author and/or co-author technical engineering documents in relation cryptography, network security and system security. What You Need to be Successful Minimum Requirements for the Project Engineer - Secure Enterprise Crypto Architect role Bachelors degree in Information Technology, Information Systems, Computer Science, Cybersecurity or similar STEM technical area of study 8 years of experience in cryptographic technologies is desired for the support for SpRCO Demonstrated ability to communicate and have effective collaboration in a cross functional, matrix environment to support multiple local and remote customer locations within multiple programs Proven experience in network engineering, network architecture, long-haul communications knowledge and experience Expertise in developing and presenting technical reports, concept documents (CONOPs), briefings and analytical assessment for different audiences. Willing to travel domestically up to 25% of the time This position requires a current TS/SCI security clearance with SAP eligibility, which is issued by the US Government. U.S. citizenship is required to obtain a security clearance In addition to the above, the minimum requirements for the Senior Project Engineer - Secure Enterprise Crypto Architect role : A minimum of 12 years engineering experience in in Information Technology, Cybersecurity, or Network Engineering Working knowledge of multiple types of Proven ability and expertise in cryptographic technologies, standards, and policies Strong leadership, team management and collaboration abilities. Proficient in Linux and its native programming or scripting languages How You Can Stand Out It would be impressive if you have one or more of these: Advanced degree in Information Technology, Information Systems, Computer Science, Cybersecurity or similar technical area of study Experience with implementing and operating COMSEC items, primarily space-based cryptographic solutions, but also terrestrial cryptographic solutions Experience with space and ground system infrastructure, including design, implementation, and operation of COMSEC hardware, network devices, compute systems Experience with designing or implementing data-in-transit flows and data structures-both space and ground-at all layers of OSI model Experience with configuring Amazon Web Services (AWS) based cloud computing services Proficient in Linux and its native programming or scripting languages Test plan authoring, editing, review, and execution Current TS/SCI with the ability to obtain SAP clearances, which is issued by the US government. US citizenship is required to obtain a security clearance. Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: Operate Strategically Lead Change Engage with Impact Foster Innovation Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: Comprehensive health care and wellness plans Paid holidays, sick time, and vacation Standard and alternate work schedules, including telework options 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire Flexible spending accounts Variable pay program for exceptional contributions Relocation assistance Professional growth and development programs to help advance your career Education assistance programs A work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color, religion, genetic information, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at ************ or by email at ****************************** . You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. Information Systems and Cyber Division (ISCD) staff couple the latest in information system technologies, such as elastic compute clouds, containerization, microservices, real-time operating systems, and visualization frameworks, with expertise in cyber security, software architecture, software engineering, data science, Artificial Intelligence, process improvement, and software development to deliver responsive, resilient, high-performance software intensive systems to our IC, DoD, and civilian customers. Aerospace's Cyber Security and Advanced Platforms Subdivision, Advanced Cryptographic Capabilities Department is seeking a Communication/System Security/Crypto Engineer to help design, implement, assess and deploy data-in-transit solutions that defend our nation's most valuable assets in space. We are seeking a highly motivated Communication/System Security/Crypto Project Engineer | Senior Project Engineer with a desire to support customers across a full spectrum of system security, crypto, and communications system activities. This is a full-time position based in Albuquerque and Kirtland AFB, New Mexico, which is 100%onsite. What You'll Be Doing * Provide direct engineering support primarily to the Space Rapid Capabilities Office. Additional support may occasionally be requested for Space Systems Command, Air Force Research Lab and Space Development Agency customers. * Advise government customers and their program contractors on cryptographic capability design and implementation. * Perform research and technical assessments in areas of cryptography, network security, cybersecurity, communications integration. * Review and develop technical designs, Concept of Operations (CONOPs), system test plans, technical documentation and provide feedback and guidance in both oral and written form. * Develop technical information for ground and space systems to include integration of cryptographic hardware, system security controls, long-haul communications, securing data-in-transit. * Communicate with multiple government agencies, contractors, and vendors to develop new cryptographic, system security, and communications technologies . * Author and/or co-author technical engineering documents in relation cryptography, network security and system security. What You Need to be Successful Minimum Requirements for the Project Engineer - Secure Enterprise Crypto Architect role * Bachelors degree in Information Technology, Information Systems, Computer Science, Cybersecurity or similar STEM technical area of study * 8 years of experience in cryptographic technologies is desired for the support for SpRCO * Demonstrated ability to communicate and have effective collaboration in a cross functional, matrix environment to support multiple local and remote customer locations within multiple programs * Proven experience in network engineering, network architecture, long-haul communications knowledge and experience * Expertise in developing and presenting technical reports, concept documents (CONOPs), briefings and analytical assessment for different audiences. * Willing to travel domestically up to 25% of the time * This position requires a current TS/SCI security clearance with SAP eligibility, which is issued by the US Government. U.S. citizenship is required to obtain a security clearance In addition to the above, the minimum requirements for the Senior Project Engineer - Secure Enterprise Crypto Architect role: * A minimum of 12 years engineering experience in in Information Technology, Cybersecurity, or Network Engineering * Working knowledge of multiple types of Proven ability and expertise in cryptographic technologies, standards, and policies * Strong leadership, team management and collaboration abilities. * Proficient in Linux and its native programming or scripting languages How You Can Stand Out It would be impressive if you have one or more of these: * Advanced degree in Information Technology, Information Systems, Computer Science, Cybersecurity or similar technical area of study * Experience with implementing and operating COMSEC items, primarily space-based cryptographic solutions, but also terrestrial cryptographic solutions * Experience with space and ground system infrastructure, including design, implementation, and operation of COMSEC hardware, network devices, compute systems * Experience with designing or implementing data-in-transit flows and data structures-both space and ground-at all layers of OSI model * Experience with configuring Amazon Web Services (AWS) based cloud computing services * Proficient in Linux and its native programming or scripting languages * Test plan authoring, editing, review, and execution * Current TS/SCI with the ability to obtain SAP clearances, which is issued by the US government. US citizenship is required to obtain a security clearance. Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: * Operate Strategically * Lead Change * Engage with Impact * Foster Innovation * Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * A work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color, religion, genetic information, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at ************ or by email at ****************************** . You can also review Know Your Rights: Workplace Discrimination is Illegal.

Responsibilities Peraton has an opening for a Spacecraft ACS Team Lead at the White Sands Complex in Las Cruces, NM. The Spacecraft ACS Team Lead will join a team of engineers dedicated to ensuring the health, safety of the Tracking and Data Relay Satellite (TDRS) fleet through evaluation and assessment of spacecraft telemetry. The Spacecraft ACS Team assists with planning and execution of spacecraft orbit management, momentum management, subsystem assessments and telemetry monitoring, and other activities required to support unmanned and human space flight mission success. Peraton is the prime contractor for NASA at the White Sands Complex (WSC) near Las Cruces, New Mexico. Operating here are two functionally identical satellite ground terminals: The White Sands Ground Terminal, and the Second TDRSS Ground Terminal. These ground terminals ensure uninterrupted communications between various ground stations, NASA's orbiting geosynchronous fleet of Tracking and Data Relay Satellites (TDRS), customer spacecraft, and the computer systems that support such spacecraft. WSC serves as an interface for distributing satellite data to control centers and scientists who then use the daily influx of data to expand our ever-growing knowledge of the Earth and the universe. This position will be responsible for the following: * Lead a team of direct reports to complete project requirements and allocate tasking for spacecraft engineers. * Perform daily monitoring and trending of TDRS spacecraft state-of-health data. * Develop, maintain, and validate procedures for performing spacecraft activities, including station-keeping, momentum management, spacecraft relocations, and anomaly recovery. * Perform spacecraft End-of-Mission planning, simulations, execution, and documentation. * Responsible for the technical integrity of projects and operations while providing technical guidance to department staff and project levels. * Work closely with resources to create test plans and ensure that issues are properly assigned and resolved. * Provide accurate, articulate, quick turnaround notifications and status updates for anomalies. * Analyze and identify spacecraft system anomaly root causes. Coordinate team planning and execution of recovery actions. * Assist in developing and maintaining checklists and training material for spacecraft engineers. * Conduct team meetings as necessary to plan for upcoming activities, discuss ongoing issues, and facilitate team cohesiveness. Qualifications Required Experience: * Bachelor's degree in Aerospace Engineering, Electrical Engineering, Mechanical Engineering, Physics or related field and 6+ years of relative experience. * Prior experience working with spacecraft and leading projects and/or teams. * Occasional travel to other sites may be required. * Security clearance - this position requires the candidate to be able to obtain a DoD Secret security clearance and to maintain the clearance thereafter. In order to obtain a clearance, you need to be a US Citizen and show proof of citizenship. An Interim Secret is acceptable to start. Desired Experience: * Active Secret security clearance. * Previous experience associated with TDRS operations is highly desired. * MS degree in Aerospace Engineering, Electrical Engineering, Mechanical Engineering, Physics or related field. * Proficiency with Systems Tool Kit (STK), Python, MATLAB, or LabVIEW. * Previous spacecraft operations, design, or test experience. * Demonstrated written and oral communication skills, including ability to communicate effectively with peers and management. * Experience with MS Office Suite (Excel, Word, PowerPoint). Peraton Overview Peraton is a next-generation national security company that drives missions of consequence spanning the globe and extending to the farthest reaches of the galaxy. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies. Peraton operates at the critical nexus between traditional and nontraditional threats across all domains: land, sea, space, air, and cyberspace. The company serves as a valued partner to essential government agencies and supports every branch of the U.S. armed forces. Each day, our employees do the can't be done by solving the most daunting challenges facing our customers. Visit peraton.com to learn how we're keeping people around the world safe and secure. Target Salary Range $80,000 - $128,000. This represents the typical salary range for this position. Salary is determined by various factors, including but not limited to, the scope and responsibilities of the position, the individual's experience, education, knowledge, skills, and competencies, as well as geographic location and business and contract considerations. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. EEO EEO: Equal opportunity employer, including disability and protected veterans, or other characteristics protected by law.