Line Operator jobs at Schwan Cosmetics International

TWB Company is seeking a Machine Operator to join our night shift team in Antioch, TN. This position is responsible for operating machinery to process steel components used in automotive manufacturing. Duties include setup, inspection, quality checks, material handling, and documentation. This is an entry-level, full-time position. No prior experience is required-on-the-job training will be provided. TWB, Tailor Welded Blanks, is a joint venture of Worthington Steel and BAO Steel Company. We developed the tailor welded blank market and have been the leading manufacturer of tailor welded products in North America for over 30 years. TWB supports just-in-time production and services to the automotive industry, helping make vehicles stronger, lighter, safer, and more fuel efficient. TWB operates facilities across Michigan, Ohio, Kentucky, Tennessee, Canada, and Mexico. We are the largest purchaser of flat-rolled steel behind the automakers, and our steel can be found in over 50% of U.S. vehicles. Our workplace culture is guided by the Golden Rule: treating others the way we want to be treated. We value safety, teamwork, and long-term employee success. Responsibilities * Operate production machinery in a safe and efficient manner * Follow written work orders, blueprints, and process specifications * Set up and adjust machines for production runs * Perform first-piece and in-process inspections * Identify and report quality issues or material defects * Accurately complete required documentation and labels * Move, tag, and stage materials and finished goods * Assist with routine maintenance and housekeeping * Follow all OSHA and company safety procedures Minimum Requirements: * Valid driver's license * Ability to read and comprehend work instructions and safety guidelines * Basic math, reading, and writing skills * Ability to lift up to 70 pounds and stand for extended periods Preferred Qualifications: * High school diploma or GED * Forklift operation experience * Familiarity with measurement tools (calipers, micrometers, tape measures) * Ability to read blueprints or production schematics * CPR/First Aid training (provided on site if not already certified) Compensation and Benefits * Starting pay $20.50/HR plus $0.55/hour shift differential * Paid holidays starting on Day 1 * Performance-based pay increases * Quarterly profit sharing * Full medical, dental, and vision benefits starting Day 1 * Company-paid training and development About Worthington Steel Worthington Steel (NYSE: WS) is one of North America's most trusted metals processors, with expertise in carbon flat-roll steel, electrical steel laminations, and tailor welded solutions. Worthington operates 32 facilities in 7 states and 6 countries, employing over 4,600 team members. We are committed to creating value for our customers, our employees, and our communities through people-first leadership, innovation, and sustainability.

For over 100 years, BlueScope continues to build on our reputation of quality brands and products, leading technology and a customer-first spirit. Through our global brands, we are one of the largest manufacturers of building solutions in the world. Our diverse, bright and inspired workforce is committed to bettering the communities we serve through breakthrough thinking and innovations. Your goals, ideas and perspective can help shape our future - we look forward to hearing them! Under general supervision, the Machine Operator 1 sets up and operates production machines in accordance with established procedures and guidelines. The Machine Operator 1 reads and interprets blueprints and diagrams to select, position and secure machinery, as well as adjusts machine settings to complete tasks accurately, according to specifications and in a timely fashion. Primary Duties & Responsibilities Operate machines to cut, punch, bend, weld or otherwise shape material into specified components to support current material demands Set up machine and confirm specifications for needed material from drawings, blueprints, tablet or other means Use lifting devices such as cranes, forklifts or other equipment to place materials/parts where needed Use appropriate measuring tools, processes and systems to perform First Piece Inspection and other quality checks before, during and after production to confirm material and/or product meets specifications Actively participates in continuous improvement and corrective action activities Maintain inventory or material used and general machine maintenance Perform housekeeping, 5S and other duties as assigned Qualifications Minimum Education & Experience Qualifications High School diploma or equivalent, or attain ACT WorkKeys Assessment at certified job profile skill level Preferred Education & Experience Qualifications 1 year experience in a manufacturing environment Technical Skills & Competencies Basic Computer skills Knowledge or raw materials and production processes Knowledge of machines and tools, including their design, uses, repair and maintenance Ability to read blueprints Overhead crane and/or hoists. May require other mobile equipment. Variety of measuring tools including square, tape measure, caliper, micrometer, etc. Variety of hand tools including grinder, hands free tooling, etc. Additional Information The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short and long term disability, paid time off, and retirement. EEO: Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability.

For over 100 years, BlueScope continues to build on our reputation of quality brands and products, leading technology and a customer-first spirit. Through our global brands, we are one of the largest manufacturers of building solutions in the world. Our diverse, bright and inspired workforce is committed to bettering the communities we serve through breakthrough thinking and innovations. Your goals, ideas and perspective can help shape our future - we look forward to hearing them! Join Our Team as a Machine Operator! We're looking for skilled and detail-oriented individuals to operate and maintain machines that shape materials into high-quality components for our community. Whether you're an experienced operator or eager to learn and grow in a dynamic environment, we welcome candidates of all backgrounds to bring their unique strengths to our team. What We Offer · Training and Growth: Hands-on training and opportunities for professional development, regardless of prior experience. · Supportive Team: A collaborative work environment where you'll feel supported and empowered. · Inclusive Environment: A culture that values diversity and promotes equity, ensuring everyone has a voice and opportunities to succeed. · Competitive Benefits: A comprehensive benefits package and work-life balance initiatives. What We're Looking For BlueScope Buildings is committed to being an employer of choice by creating a valuable work experience that keeps our people engaged, productive, safe and healthy. You're a great fit if you: · Have a keen eye for detail and take pride in producing quality work. · Enjoy hands-on roles and working with machinery or are eager to learn. · Are comfortable working in a supportive, team-oriented environment. · Value safety, organization, and continuous improvement. What You'll Do · Operate and Shape: Use machines to cut, punch, bend, weld, or shape materials into specified components to meet current demands. · Prepare and Set Up: Set up machines and confirm specifications using drawings, blueprints, tablets, or other tools. · Lift and Position Materials: Safely use lifting devices, such as cranes and forklifts, to position materials or parts as needed. · Ensure Quality: Utilize measuring tools and processes to perform inspections before, during, and after production, ensuring materials meet exact specifications. · Contribute to Improvement: Actively participate in continuous improvement and corrective action activities. · Maintain and Organize: Keep track of material inventory, perform machine maintenance, and support housekeeping and organizational standards, such as 5-S practices. Join a team where your skills, ideas, and contributions will make an impact. Let's build something extraordinary-together. Additional Information The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short and long term disability, paid time off, and retirement. EEO: Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability.

BlueScope Coated Products is one of the largest coil coating companies in the United States, with facilities across the country. With more than four decades of expertise providing painted metal coils and toll processing services for industries in the construction and consumer product markets, we pride ourselves on delivering premium quality, reliable service, and ongoing innovation to our customers. Essential Duties & Responsibilities: Responsible for the overall operation of the exit section of the paint line, including speed, steering and tension adjustments. Monitors the operating conditions to verify that line tension and drive systems are operating properly. Responsible for inspection of the strip surface through the entire exit section of the paint line identification of defective product. This includes determining whether a condition is evolving from the incoming material or being created by the paint line process. Responsible for safely cutting and discharging finished coils from the exit section of the paint line Responsible for quarantining defective product (using the HFI process), obtaining representative samples of defective product and notifying Quality Control when non-conforming conditions exist Responsible for understanding and complying with the fundamental principles associated with the Quality and Environment Management Systems in place Communicates daily with internal personnel from Maintenance, Operations and Quality Control to help resolve any problems and help achieve company goals (If in the even of an abnormal occurrence) and employee feels uncomfortable, unsure or unable to safely correct an issue, that employee must contact a member of plant leadership for assistance prior to attempting to correct the issue. Environmental Impacts of this Position The Machine Operator I has a responsibility to take all foreseeable precautions to avoid environmental impacts, while performing daily duties, such as: oil containment and good housekeeping practices. Qualification Requirements: To perform satisfactorily in this position, an individual must be able to perform each essential duty satisfactorily. 2-5 years of experience required in a manufacturing or warehouse industry The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with certain disabilities to perform the essential functions. Education and/or Experience: High school diploma or equivalent required Basic computer skills are a big plus Candidate must have good communication skills Language Skills: Ability to read and comprehend documents including safety rules, operating and maintenance instructions, procedure manuals and simple correspondence. Also, the ability to, communicate information ( in small group situations ) to other employees. Mathematical Skills: Ability to calculate figures and amounts such as fractions and percentages. Reasoning Ability: Ability to, apply common sense understanding to perform work instructions that are furnished in written, oral or diagram form. Also, the ability to, solve problems that involve multiple variables in a standard situation. Other Skills & Abilities: Incumbent is required to drive a forklift and use power tools. The incumbent should also possess basic computer (data entry) skills and should be capable of recognizing metal defects. Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to walk. The employee is occasionally required to stand; sit; bend; stoop; use hands to handle or feel objects, tools, or controls; reach with hands and arms; climb or balance. The employee may be required to be capable of lifting a minimum weight of 50 pounds. Specific vision abilities include close-up and distance vision, color vision, peripheral vision, and depth perception. Work Environment: While performing the duties of this job, the employee performs near moving mechanical parts and is occasionally exposed to toxic or caustic chemicals and extreme conditions Adverse working conditions at times The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short- and long-term disability, paid time off, and retirement. EEO Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability. Additional Information The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short and long term disability, paid time off, and retirement. EEO: Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Production Supervisor Your role and responsibilities (Mandatory) In this role, you will have the opportunity to operate process equipment or machinery to convert raw materials or semi-finished parts into components or finished parts for a final product at the right time and with the required quality. Each day, you will execute the assigned tasks according to agreed workflows and in accordance with ABB standard processes and safety guidelines and reports any non-compliance. You will also showcase your expertise by operating machines in accordance with the operating manual, work schedule, and/or production order instructions. The work model for the role is: Onsite This role is contributing to the success of Busway business in Selmer, TN. Your position will be mainly accountable for: Performing routine machinery set-up, adjustments, and repairing and fitting simple replacement parts. Ensuring regular standard maintenance of the equipment, tools set-up, programming activities, and troubleshooting and reporting issues, if any; and maintaining detailed records of machinery set-ups, repairs, and maintenance activities. Keeping track of approved, defective units, and final products. Our team dynamics (Optional) You will join a dynamic team, where you will be able to thrive. Qualifications for the role You are highly skilled working with machinery and have the ability to troubleshoot is necessary. Completed welding certificate and/or 2+ years of Welding experience required. You are passionate about Working in a team environment . High school diploma or equivalent required. You are at ease communicating in a team setting. Benefits We also offer our employees the following benefits available on day 1: Health Insurance Vision Insurance Dental Insurance Life & Accident 401K More about us ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their - sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants my request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at ************** or by sending an email to **************** Resumes and applications will not be accepted in this manner. We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Production Supervisor Your role and responsibilities (Mandatory) In this role, you will have the opportunity to operate process equipment or machinery to convert raw materials or semi-finished parts into components or finished parts for a final product at the right time and with the required quality. Each day, you will execute the assigned tasks according to agreed workflows and in accordance with ABB standard processes and safety guidelines and reports any non-compliance. You will also showcase your expertise by operating machines in accordance with the operating manual, work schedule, and/or production order instructions. The work model for the role is: {onsite} This role is contributing to the success of the Busway plant in {Selmer TN}. You will be mainly accountable for: Performing routine machinery set-up, adjustments, and repairing and fitting simple replacement parts. Ensuring regular standard maintenance of the equipment, tools set-up, programming activities, and troubleshooting and reporting issues, if any; and maintaining detailed records of machinery set-ups, repairs, and maintenance activities. Keeping track of approved, defective units, and final products. Our team dynamics (Optional) You will join a talented, high performing team, where you will be able to thrive. Qualifications for the role You enjoy working with machinery and tooling including troubleshooting Ability to demonstrate your experience . You have 2 years of experience in machine operations You are qualified in Blueprint reading skills You are innovative when working within a team. High School diploma or equivalent required. Benefits We offer our employees the following benefits: Health ,Vison, Dental Insurance Life and Accident Insurance 401K with company match Benefits start on first day of employment More about us ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their - sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants my request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at ************** or by sending an email to **************** Resumes and applications will not be accepted in this manner. Guidelines: Please be aware: All fields in yellow should be populated with relevant information (based on Job description and the Kick-off form). All other text can also be modified if necessary, within the given guidelines. Text in bold is fixed and should not be edited or removed Reporting Manager section is mandatory both internally and externally, to be posted via eRec functionality “Your role and responsibilities” should be plain text followed by maximum 4 additional bullet points The “Qualifications for the role” section should include no less than five and no more than seven bullet points. These bullet points should be listed in order of importance for the success in the role Indicate the required language knowledge in the “Qualifications for the role” section whenever it is mandatory and/or applicable Information about “Licenses and visa/work permit” is optional, use this sentence wherever it is required In the “More about us” section you can add further legal statements/PES indications or Talent Partner contacts, for example Read more about the guidelines in the Guidelines doc available in the SharePoint We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Job Title: Machine Operator - Night Shift Company: Iatric Manufacturing Solutions (a subsidiary of Rockline Industries) Shift: Rotating 3rd Shift | 7:00 PM - 7:00 AM Schedule: 2-2-3 Rotating (every other weekend) - only work 3 to 4 days per week! Make Healthy Happen - Join a Team That Powers Clean Living! Iatric Manufacturing Solutions is part of Rockline Industries, a global leader in wet wipes manufacturing. We're proud to produce products that help keep families, workplaces, and communities safe - and we're looking for dependable, driven individuals to join our night shift team as Machine Operators. As a Machine Operator, you'll play a key role in our production process, operating automated packaging equipment to ensure our wet wipes meet the highest standards of quality and safety. What We're Looking For: * A strong work ethic and dependable attendance * A team player who takes pride in doing things right * Someone who's ready to learn and grow in a fast-paced manufacturing environment Why Iatric? * Be part of a global brand with local roots * Enjoy opportunities for advancement and skill development * Benefit from competitive pay and full-time stability * Thrive in a climate-controlled, clean, and safe work environment Compensation and Benefits: * Starting pay: $18.50/hour plus $1.00/hr. for night shift differential * Pay-for-skill program to boost your wage as you grow * Medical, dental, vision, and prescription coverage * Life, short-term, and long-term disability insurance (effective after 30 days of first full month) * 401(k) with company match * 7 paid holidays + 3 floating holidays * Immediate eligibility for holiday and vacation pay * Annual allowance for prescription safety glasses * Education & fitness reimbursement * Employee product giveaways * Employee referral bonus program * Associate discount programs * Overtime available Come make a difference in our community by Making Healthy Happen - apply today and take the next step in your career with Iatric Manufacturing Solutions! POSITION SUMMARY: The Machine Operator position is responsible for ensuring the continuing safe and efficient production process for the Morristown facility, including the set-up, validation and operation of automatic packaging equipment that produces wet wipes. ESSENTIAL ACCOUNTABILITIES: * Support the production and packaging of finished goods. * Operate, troubleshoot, adjust, repair, and maintain production equipment to get maximum performance and efficiency. * Ensure the safe and efficient production of a quality product in an FDA-regulated facility. Follow cGMP procedures. * Utilize JD Edwards, Factory Talk, Docushare, and DSI scan guns to safely produce quality products to customer specifications. * Daily responsibility for performing quality checks, sampling and accurately completing required documentation. * Demonstrate commitment to Rockline/Iatric's RRITE Values of Renew, Respect, Integrity, Teamwork, and Excellence. * Associates have a direct and important role in ensuring that all work is performed in a safe manner. Effectiveness in carrying out this responsibility is part of each associate's essential accountabilities. * Contribute to a cooperative working effort by demonstrating a willingness to perform other job-related work, as needed or requested This position is designated as Safety-Sensitive (A safety-sensitive position is one in which the associate's inability or impaired ability to perform their job-related tasks could result in a direct threat to the associate's safety or the safety of others). QUALIFICATION REQUIREMENTS: (To perform this job successfully, an individual must be able to perform each of the essential accountabilities satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.) * High School Diploma or GED equivalent and a minimum of 2 years of manufacturing experience. * Experience with computer usage within a manufacturing environment. * Excellent attention to detail in daily work as well as extensive documentation. * Excellent interpersonal skills and motivation for continuous learning. PHYSICAL AND MENTAL REQUIREMENTS: (The physical demands described here are representatives of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions) * Ability to stand during 12.5-hours shifts with regular breaks. * Ability to occasionally lift up to 37 pounds. * Repetitive arm/hand movement. * Frequent bending, twisting and reaching. WORK ENVIRONMENT: (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) * 100% of work will be performed indoors * Although the facility is climate-controlled, the temperature will fluctuate slightly with changes in the seasons. * Hearing protection may be required in designated areas of the facility FLSA Status: Non-Exempt

Job Title: Machine Operator - Night Shift Company: Iatric Manufacturing Solutions (a subsidiary of Rockline Industries) Shift: Rotating 3rd Shift | 7:00 PM - 7:00 AM Schedule: 2-2-3 Rotating (every other weekend) - only work 3 to 4 days per week! Make Healthy Happen - Join a Team That Powers Clean Living! Iatric Manufacturing Solutions is part of Rockline Industries, a global leader in wet wipes manufacturing. We're proud to produce products that help keep families, workplaces, and communities safe - and we're looking for dependable, driven individuals to join our night shift team as Machine Operators. As a Machine Operator, you'll play a key role in our production process, operating automated packaging equipment to ensure our wet wipes meet the highest standards of quality and safety. What We're Looking For: A strong work ethic and dependable attendance A team player who takes pride in doing things right Someone who's ready to learn and grow in a fast-paced manufacturing environment Why Iatric? Be part of a global brand with local roots Enjoy opportunities for advancement and skill development Benefit from competitive pay and full-time stability Thrive in a climate-controlled, clean, and safe work environment Compensation and Benefits: Starting pay: $18.50/hour plus $1.00/hr. for night shift differential Pay-for-skill program to boost your wage as you grow Medical, dental, vision, and prescription coverage Life, short-term, and long-term disability insurance (effective after 30 days of first full month) 401(k) with company match 7 paid holidays + 3 floating holidays Immediate eligibility for holiday and vacation pay Annual allowance for prescription safety glasses Education & fitness reimbursement Employee product giveaways Employee referral bonus program Associate discount programs Overtime available Come make a difference in our community by Making Healthy Happen - apply today and take the next step in your career with Iatric Manufacturing Solutions! POSITION SUMMARY: The Machine Operator position is responsible for ensuring the continuing safe and efficient production process for the Morristown facility, including the set-up, validation and operation of automatic packaging equipment that produces wet wipes. ESSENTIAL ACCOUNTABILITIES: • Support the production and packaging of finished goods. • Operate, troubleshoot, adjust, repair, and maintain production equipment to get maximum performance and efficiency. • Ensure the safe and efficient production of a quality product in an FDA-regulated facility. Follow cGMP procedures. • Utilize JD Edwards, Factory Talk, Docushare, and DSI scan guns to safely produce quality products to customer specifications. • Daily responsibility for performing quality checks, sampling and accurately completing required documentation. • Demonstrate commitment to Rockline/Iatric's RRITE Values of Renew, Respect, Integrity, Teamwork, and Excellence. • Associates have a direct and important role in ensuring that all work is performed in a safe manner. Effectiveness in carrying out this responsibility is part of each associate's essential accountabilities. • Contribute to a cooperative working effort by demonstrating a willingness to perform other job-related work, as needed or requested This position is designated as Safety-Sensitive (A safety-sensitive position is one in which the associate's inability or impaired ability to perform their job-related tasks could result in a direct threat to the associate's safety or the safety of others). QUALIFICATION REQUIREMENTS: (To perform this job successfully, an individual must be able to perform each of the essential accountabilities satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.) • High School Diploma or GED equivalent and a minimum of 2 years of manufacturing experience. • Experience with computer usage within a manufacturing environment. • Excellent attention to detail in daily work as well as extensive documentation. • Excellent interpersonal skills and motivation for continuous learning. PHYSICAL AND MENTAL REQUIREMENTS: (The physical demands described here are representatives of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions) • Ability to stand during 12.5-hours shifts with regular breaks. • Ability to occasionally lift up to 37 pounds. • Repetitive arm/hand movement. • Frequent bending, twisting and reaching. WORK ENVIRONMENT: (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) • 100% of work will be performed indoors • Although the facility is climate-controlled, the temperature will fluctuate slightly with changes in the seasons. • Hearing protection may be required in designated areas of the facility FLSA Status: Non-Exempt

2nd Shift: 3:00pm - 11:00pm 3rd Shift: 11:00pm - 7:00am Weekends *: 5:30am-5:30pm, 5:30pm-5:30am *up to $5 per hour shift premium 4-10's: 5:30am-3:30pm, 3:30pm-1:30am $1,000 SIGN-ON BONUS Compensation: Starting pay is $20+/hr (off-shift). Day 1 benefits. Annual and quarterly bonuses. Paid time off and holidays. 401(k) with employer match. Tuition reimbursement. Voluntary insurance. Certified Great Place to Work. Join a high-performing team that is going for a home run! Copperweld is the leading supplier of bimetallic wiring products and the only domestic producer of copper-clad steel (“CCS”) and copper-clad aluminum (“CCA”) wire. Position Description Copperweld is hiring multiple Machine Operators across different operational levels. Some training may be required on 1st shift before transitioning to off-shift roles. Machine Operators are responsible for setting up, operating, and maintaining machinery used in the manufacturing of bimetallic wire products. This position requires working in a safety-critical, heavy industrial environment, following all protocols to ensure the wellbeing of employees and equipment. Operators must meet quality and productivity standards through the efficient, precise, and safe use of equipment in settings that may involve noise, vibration, and extreme temperatures. WHAT we need you to do. Key Responsibilities Follow machine-specific Standard Operating Procedures (SOPs) Perform machine setup and maintain continuous machine operation Monitor machine settings and record production and scrap Conduct and document quality testing May operate a forklift (license required) Adhere to safety, quality, and environmental standards Essential Physical Requirements The position requires medium-level exertion, including: Standing, walking: Frequent to constant Lifting, carrying, pushing, and pulling (up to 50 lbs.): Frequent * Note: Certain tasks may occasionally require handling weights exceeding 50 lbs. Specific requirements can be discussed with Human Resources. Climbing stairs/ladders: Occasional (especially during wire breaks) Bending, body rotation, reaching, repetitive motion: Frequent Kneeling, crouching, squatting, overhead work: Occasional Fine motor skills (e.g., fingering to detect wire defects), effective verbal communication, and visual acuity (all ranges): Frequent to constant Work Environment Exposure to noise (>85 dB), heat (>100°F), cold ( Use of PPE required, including eye, hearing, hand, arm, leg, and foot protection Shift flexibility and possible overtime (more than 40 hours/week) WHAT you need to possess. Adherence to Copperweld Core Values Prior manufacturing experience preferred Willingness to train and work across shifts Strong team and interpersonal skills Ability to utilize ERP (Enterprise Resource Planning) systems (manufacturing/quality software) WHY Copperweld? STRONG Business Outlook Comprehensive Medical, Dental, and Vision Plans PAID Time off & 10 Holidays 401k matching Company Paid Life & AD&D Insurance Education Assistance Great Place to Work Certified Copperweld is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and/or expression, age, national origin, genetic information, disability, veteran status, or any other characteristic protected by federal, state or local law. Successful candidates will be required to successfully pass drug screening and background checks. #LI-DNI

With over 80 years as an industrial technology leader, Kennametal Inc. delivers productivity to customers through materials science, tooling and wear-resistant solutions. Customers across aerospace, earthworks, energy, general engineering and transportation turn to Kennametal to help them manufacture with precision and efficiency. Every day approximately 10,000 employees are helping customers in more than 60 countries stay competitive. Kennametal generated nearly $2.4 billion in revenues in fiscal 2019. Learn more at ******************* Follow @Kennametal: Twitter, Instagram, Facebook, LinkedIn and YouTube. Manufacturing Machine Operator LaVergne, TN Monday - Friday, 3PM - 11PM -Training will be on first shift Job Summary and Mission Describe the purpose of the job Operate multiple Stahli or Blanchard grinding machines to produce high-quality products in accordance with blueprint specifications and production standards. Key Job Responsibilities These describe the job duties - Set up and operate top and bottom grinding machines, including Stahli 605 and 702 models. - Install, change, and dress grinding wheels as required. - Determine required stock removal while maintaining tolerance specifications. - Gauge inserts to ensure dimensional accuracy. - Visually inspect inserts using scopes to verify surface characteristics. - Operate additional equipment as needed to support production. - Set up machines and troubleshoot basic to moderately complex issues independently. Key Job Accountabilities These describe the job duties - Adhere strictly to all safety procedures and demonstrate a strong commitment to safe work practices. - Follow operating procedures and work instructions for non-standard operations. - Ensure all products meet specifications outlined in control plans, routings, and blueprints. - Maintain consistent production output to meet daily departmental goals. - Exhibit reliability and dependability in attendance and task execution. - Communicate safety concerns, quality issues, and production updates with supervisors and peers across all shifts. Education and Experience - High school diploma or GED required. - Previous experience with grinding equipment preferred. Work Environment - Controlled indoor environment with temperature regulation and dust collection systems. - Personal protective equipment (PPE) required: safety glasses with side shields, safety shoes, and gloves (including cut-resistant gloves when applicable). Physical Demands - Standing for approximately eight hours per shift, with two scheduled breaks. - Periodic walking, reaching, bending, and light lifting. - Must be able to lift insert trays weighing up to 33 pounds. Problem Solving - Complete assigned production orders by due date and according to operational guidelines. - Solve routine problems using standard operating procedures and job-specific knowledge. - Interpret and execute verbal and written instructions efficiently. - Apply acquired knowledge of insert styles and production processes to maintain output quality. As part of our core values, Kennametal is committed to providing an inclusive and welcoming environment for all people. We are an Equal Opportunity employer.

With over 80 years as an industrial technology leader, Kennametal Inc. delivers productivity to customers through materials science, tooling and wear-resistant solutions. Customers across aerospace, earthworks, energy, general engineering and transportation turn to Kennametal to help them manufacture with precision and efficiency. Every day approximately 10,000 employees are helping customers in more than 60 countries stay competitive. Kennametal generated nearly $2.4 billion in revenues in fiscal 2019. Learn more at ******************* Follow @Kennametal: Twitter, Instagram, Facebook, LinkedIn and YouTube. Manufacturing Machine Operator LaVergne, TN Sunday - Thursday, 11pm - 7am Job Summary and Mission Describe the purpose of the job Operate multiple Stahli or Blanchard grinding machines to produce high-quality products in accordance with blueprint specifications and production standards. Key Job Responsibilities These describe the job duties - Set up and operate top and bottom grinding machines, including Stahli 605 and 702 models. - Install, change, and dress grinding wheels as required. - Determine required stock removal while maintaining tolerance specifications. - Gauge inserts to ensure dimensional accuracy. - Visually inspect inserts using scopes to verify surface characteristics. - Operate additional equipment as needed to support production. - Set up machines and troubleshoot basic to moderately complex issues independently. Key Job Accountabilities These describe the job duties - Adhere strictly to all safety procedures and demonstrate a strong commitment to safe work practices. - Follow operating procedures and work instructions for non-standard operations. - Ensure all products meet specifications outlined in control plans, routings, and blueprints. - Maintain consistent production output to meet daily departmental goals. - Exhibit reliability and dependability in attendance and task execution. - Communicate safety concerns, quality issues, and production updates with supervisors and peers across all shifts. Education and Experience - High school diploma or GED required. - Previous experience with grinding equipment preferred. Work Environment - Controlled indoor environment with temperature regulation and dust collection systems. - Personal protective equipment (PPE) required: safety glasses with side shields, safety shoes, and gloves (including cut-resistant gloves when applicable). Physical Demands - Standing for approximately eight hours per shift, with two scheduled breaks. - Periodic walking, reaching, bending, and light lifting. - Must be able to lift insert trays weighing up to 33 pounds. Problem Solving - Complete assigned production orders by due date and according to operational guidelines. - Solve routine problems using standard operating procedures and job-specific knowledge. - Interpret and execute verbal and written instructions efficiently. - Apply acquired knowledge of insert styles and production processes to maintain output quality. As part of our core values, Kennametal is committed to providing an inclusive and welcoming environment for all people. We are an Equal Opportunity employer.

COMFORT FOR THE WORLD We believe in good sleep as a necessity. When people sleep well, they are healthier, smarter, stronger. As a leading industry expert, the focus of Sinomax is to provide millions of comfort solutions to people around the world. Sinomax carries an unwavering determination to deliver products that dramatically enhance comfort and well-being through the production, supply, and distribution of our quality sleep and comfort products. In doing so, we help to make the world a better place. Benefit package offered: Employee offered standard company benefit package to include medical, dental, vision, term life insurance, accidental death benefits, and eligibility to participate in a safe harbor 401(k) plan. Position Schedule: Mon-Thru 4:30am-3:00pm Position Summary Responsible for manufacturing responsibilities on designated equipment, keeping to production schedules, and complying with all quality standards that apply to manufacturing and operations. Position Description Understand and follow manufacturing instructions and Quality System Requirements as per training Read and understand engineering drawings, shop orders, work instructions and all operations and manufacturing instructions. Meet and exceed production and quality goals Perform daily duties in manufacturing areas such as completing daily labor sheets. Work with management to resolve discrepancies and errors. Follow up and correct problems if required. Understand and comply with company safety rules and company policies. Approval The Executive Team (CEO, Controller, Chief Marketing and Merchandising Officer, VP of Operations, Human Resources) will be involved in all hires. Team determines need, Human Resources will facilitate the process and select candidates, Controller will verify budget for the position. The position's direct manager will also be part of the interviewing and decision making process as well as a possible peer. Any Necessary Accommodations: All reasonable accommodations will be considered. Background checks and pre-employment drug tests will be conducted. Position Requirements Able to opearte CNC Machine Basic English reading/writing skills Work experience within a manufacturing environment preferred Willing to work overtime, longer days, and some weekends if required Ability to interpret and translate standard operating procedures. Thorough understanding of or the ability to quickly learn production equipment. Proficient in general computer knowledge. Ability to perform basic math Equipment Used: CNC Machine Work Environment: Must stand and walk for a minimum of 8 hours per day or longer in overtime situations. Must be able to lift heavy product or raw materials up to 100 pounds multiple times per hour (heavy loads must be team-lifted). Work is performed in a sometimes hot, cold, humid, noisy, industrial environment, and around dust, oil, grease chemicals, and other substances. Location: Lavergne TN All reasonable accommodations will be considered. Background checks and pre-employment drug tests will be conducted. Sinomax USA, Inc. is a proud equal opportunity employer committed to building and maintaining a diverse workforce. As such, we will consider all qualified applicants for employment and do not discriminate in connection with employment decisions on the basis of an applicant or employee's race, color, national origin, ethnicity, ancestry, citizenship status, sex, gender, gender identity, gender expression, religion, age, marital status, personal appearance (including height and weight), sexual orientation, family responsibilities, physical or mental disability, medical condition, pregnancy status (including childbirth, breastfeeding or related medical conditions), education, genetic characteristics or information, political affiliation, military or veteran status or other classifications protected by applicable federal, state and local laws in the jurisdictions where Sinomax employs employees. In addition, Sinomax USA., Inc. will provide applicants who require a reasonable accommodation, because of an applicant's disability or religion, to complete this employment application and/or any other process in connection with an individuals' application for employment with Sinomax USA, Inc. Applicants who require such accommodation should contact Sinomax USA's recruiter at *********************************

**Accelerate the possible by joining a winning Amcor team that's transforming the packaging industry and improving lives around the world.** At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It's our core value and integral to how we do business. Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win - adapting quickly in an everchanging world - and make smart choices to safeguard our business, our communities and the people we serve for generations to come. And we invest in our world-class team, empowering our colleagues to unpack their potential, because we believe when our people grow, so does our business. To learn more about playing for Team Amcor, visit ************* | LinkedIn | YouTube **Responsibilities** + Report to front line leadership. + Work as a team member to obtain plant & departmental goals. + Safely operate equipment in a manner to ensure a maximum product throughput and minimum downtime including clearing & restarting machinery as necessary. + Visually inspect & gauge product in production. Documenting inspection results. + Report any non-conformances to front line leadership. + Correctly complete daily production reports & submit at shift's end. + Feed materials to machines to keep production running. + Read & interpret traveler/work order. + Operate & understand MATTEC software. + Perform routine housekeeping, cleaning and maintenance as assigned/required. + Uphold Safety Absolutes. + Work & perform to ISO standards, SOPs and established Work Instructions. + Uphold Quality Standards & follow the Absolutes. + Other duties as assigned. **Qualifications** + Capable of physical mobility including sitting, bending, twisting, standing, and lifting. + Capable of reading, writing, and speaking English. + Capable of lifting up to 35lbs repeatedly. + Capable of complying with all Safety requirements including the use of PPE: PPE includes but is not limited to Bump Cap or Hard Hat, Safety Eyewear or Prescription Safety Eyewear, Safety Shoes, Hearing Protection and Disposable Mask. + Capable of maintaining an attendance record within Company guidelines and working required overtime. + High School Graduate or equivalent. + Negative drug screen results. + Work in a safe manner. + Previous experience in an assembly operation preferred. **Additional Info** + 12 hour shift (2 Days On, 2 Days Off, 3 Days On, 2 Days Off, 2 Days On, 3 Days Off) + Climate Controlled Environment + Additional $1.50/hr differential for night shift. **Contact** **Equal Opportunity Employer/Minorities/Females/Disabled/Veterans/Sexual Orientation/Gender Identity** Amcor is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. If you would like more information about your EEO rights as an applicant under the law, please click on the " _Know Your Rights: Workplace Discrimination is Illegal" Poster_ . If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please call 224-313-700 and let us know the nature of your request and your contact information. **About Amcor** Amcor is a global leader in packaging solutions for consumer and healthcare products. With industry-leading innovation capabilities, global scale and technical expertise, we help our customers grow and meet the needs of millions of consumers every day. Our teams develop responsible, more sustainable packaging in flexible and rigid formats across multiple materials. Supported by a commitment to safety, ~70,000 colleagues across ~140 countries bring our global capabilities to local customers and provide local access to global brands. Our work is guided by our purpose of elevating customers, shaping lives and protecting the future. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. (********************************************************************************************************************* **Location** _US-TN-JACKSON_ **Job ID** _2025-35481_ **Position Type** _Regular Full-Time_ **Category** _Manufacturing_ **Location : Address** _1005 LOWER BROWNSVILLE ROAD_

Accelerate the possible by joining a winning Amcor team that's transforming the packaging industry and improving lives around the world. At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It's our core value and integral to how we do business. Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win - adapting quickly in an everchanging world - and make smart choices to safeguard our business, our communities and the people we serve for generations to come. And we invest in our world-class team, empowering our colleagues to unpack their potential, because we believe when our people grow, so does our business. To learn more about playing for Team Amcor, visit ************* | LinkedIn | YouTube Responsibilities * Report to front line leadership. * Work as a team member to obtain plant & departmental goals. * Safely operate equipment in a manner to ensure a maximum product throughput and minimum downtime including clearing & restarting machinery as necessary. * Visually inspect & gauge product in production. Documenting inspection results. * Report any non-conformances to front line leadership. * Correctly complete daily production reports & submit at shift's end. * Feed materials to machines to keep production running. * Read & interpret traveler/work order. * Operate & understand MATTEC software. * Perform routine housekeeping, cleaning and maintenance as assigned/required. * Uphold Safety Absolutes. * Work & perform to ISO standards, SOPs and established Work Instructions. * Uphold Quality Standards & follow the Absolutes. * Other duties as assigned. Qualifications * Capable of physical mobility including sitting, bending, twisting, standing, and lifting. * Capable of reading, writing, and speaking English. * Capable of lifting up to 35lbs repeatedly. * Capable of complying with all Safety requirements including the use of PPE: PPE includes but is not limited to Bump Cap or Hard Hat, Safety Eyewear or Prescription Safety Eyewear, Safety Shoes, Hearing Protection and Disposable Mask. * Capable of maintaining an attendance record within Company guidelines and working required overtime. * High School Graduate or equivalent. * Negative drug screen results. * Work in a safe manner. * Previous experience in an assembly operation preferred. Additional Info * 12 hour shift (2 Days On, 2 Days Off, 3 Days On, 2 Days Off, 2 Days On, 3 Days Off) * Climate Controlled Environment * Additional $1.50/hr differential for night shift. Contact Equal Opportunity Employer/Minorities/Females/Disabled/Veterans/Sexual Orientation/Gender Identity Amcor is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. If you would like more information about your EEO rights as an applicant under the law, please click on the "Know Your Rights: Workplace Discrimination is Illegal" Poster. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please call 224-313-700 and let us know the nature of your request and your contact information. About AmcorAmcor is a global leader in packaging solutions for consumer and healthcare products. With industry-leading innovation capabilities, global scale and technical expertise, we help our customers grow and meet the needs of millions of consumers every day. Our teams develop responsible, more sustainable packaging in flexible and rigid formats across multiple materials. Supported by a commitment to safety, ~70,000 colleagues across ~140 countries bring our global capabilities to local customers and provide local access to global brands. Our work is guided by our purpose of elevating customers, shaping lives and protecting the future.

With over 80 years as an industrial technology leader, Kennametal Inc. delivers productivity to customers through materials science, tooling and wear-resistant solutions. Customers across aerospace, earthworks, energy, general engineering and transportation turn to Kennametal to help them manufacture with precision and efficiency. Every day approximately 10,000 employees are helping customers in more than 60 countries stay competitive. Kennametal generated nearly $2.4 billion in revenues in fiscal 2019. Learn more at ******************* Follow @Kennametal: Twitter, Instagram, Facebook, LinkedIn and YouTube. Manufacturing Machine Operator LaVergne, TN Monday - Friday, 3PM - 11PM -Training will be on first shift Job Summary and Mission Describe the purpose of the job Operate multiple Stahli or Blanchard grinding machines to produce high-quality products in accordance with blueprint specifications and production standards. Key Job Responsibilities These describe the job duties - Set up and operate top and bottom grinding machines, including Stahli 605 and 702 models. - Install, change, and dress grinding wheels as required. - Determine required stock removal while maintaining tolerance specifications. - Gauge inserts to ensure dimensional accuracy. - Visually inspect inserts using scopes to verify surface characteristics. - Operate additional equipment as needed to support production. - Set up machines and troubleshoot basic to moderately complex issues independently. Key Job Accountabilities These describe the job duties - Adhere strictly to all safety procedures and demonstrate a strong commitment to safe work practices. - Follow operating procedures and work instructions for non-standard operations. - Ensure all products meet specifications outlined in control plans, routings, and blueprints. - Maintain consistent production output to meet daily departmental goals. - Exhibit reliability and dependability in attendance and task execution. - Communicate safety concerns, quality issues, and production updates with supervisors and peers across all shifts. Education and Experience - High school diploma or GED required. - Previous experience with grinding equipment preferred. Work Environment - Controlled indoor environment with temperature regulation and dust collection systems. - Personal protective equipment (PPE) required: safety glasses with side shields, safety shoes, and gloves (including cut-resistant gloves when applicable). Physical Demands - Standing for approximately eight hours per shift, with two scheduled breaks. - Periodic walking, reaching, bending, and light lifting. - Must be able to lift insert trays weighing up to 33 pounds. Problem Solving - Complete assigned production orders by due date and according to operational guidelines. - Solve routine problems using standard operating procedures and job-specific knowledge. - Interpret and execute verbal and written instructions efficiently. - Apply acquired knowledge of insert styles and production processes to maintain output quality. As part of our core values, Kennametal is committed to providing an inclusive and welcoming environment for all people. We are an Equal Opportunity employer.

With over 80 years as an industrial technology leader, Kennametal Inc. delivers productivity to customers through materials science, tooling and wear-resistant solutions. Customers across aerospace, earthworks, energy, general engineering and transportation turn to Kennametal to help them manufacture with precision and efficiency. Every day approximately 10,000 employees are helping customers in more than 60 countries stay competitive. Kennametal generated nearly $2.4 billion in revenues in fiscal 2019. Learn more at ******************* Follow @Kennametal: Twitter, Instagram, Facebook, LinkedIn and YouTube. Manufacturing Machine Operator LaVergne, TN Sunday - Thursday, 11pm - 7am Job Summary and Mission Describe the purpose of the job Operate multiple Stahli or Blanchard grinding machines to produce high-quality products in accordance with blueprint specifications and production standards. Key Job Responsibilities These describe the job duties - Set up and operate top and bottom grinding machines, including Stahli 605 and 702 models. - Install, change, and dress grinding wheels as required. - Determine required stock removal while maintaining tolerance specifications. - Gauge inserts to ensure dimensional accuracy. - Visually inspect inserts using scopes to verify surface characteristics. - Operate additional equipment as needed to support production. - Set up machines and troubleshoot basic to moderately complex issues independently. Key Job Accountabilities These describe the job duties - Adhere strictly to all safety procedures and demonstrate a strong commitment to safe work practices. - Follow operating procedures and work instructions for non-standard operations. - Ensure all products meet specifications outlined in control plans, routings, and blueprints. - Maintain consistent production output to meet daily departmental goals. - Exhibit reliability and dependability in attendance and task execution. - Communicate safety concerns, quality issues, and production updates with supervisors and peers across all shifts. Education and Experience - High school diploma or GED required. - Previous experience with grinding equipment preferred. Work Environment - Controlled indoor environment with temperature regulation and dust collection systems. - Personal protective equipment (PPE) required: safety glasses with side shields, safety shoes, and gloves (including cut-resistant gloves when applicable). Physical Demands - Standing for approximately eight hours per shift, with two scheduled breaks. - Periodic walking, reaching, bending, and light lifting. - Must be able to lift insert trays weighing up to 33 pounds. Problem Solving - Complete assigned production orders by due date and according to operational guidelines. - Solve routine problems using standard operating procedures and job-specific knowledge. - Interpret and execute verbal and written instructions efficiently. - Apply acquired knowledge of insert styles and production processes to maintain output quality. As part of our core values, Kennametal is committed to providing an inclusive and welcoming environment for all people. We are an Equal Opportunity employer.

Bongards Creameries is a member owned Coop that has been operating since 1908. We take pride in our agricultural roots and our mission to provide a sustainable market for our patron's milk. Our vision is to be the best dairy organization and to be an employer of choice in the region. People come to Bongards for a variety of reasons, but they stay because they are valued, listened to and rewarded for their efforts. Job Summary: Bongards' Creameries is seeking a Day Shift Machine Operator based out of our Humboldt facility. The machine operator is responsible for operating and troubleshooting various machines involved in cheese making processes. This is an Entry Level position where the candidate will operate machines on a rotating basis with the goal of a permanent production position. Duties and Responsibilities: Understands and follows set protocols for PPE and Cleanliness (Handwashing, Uniform, Tools, etc) Operation of various machines (filler, casting line, wrapper, former, grinder, massman etc) Monitor quality of boxes, pouches, labels and communicate to other operators Unwrap barrels, ensure cheese packages are made correctly Ensure dry ingredients are placed on pallet according to the blend sheet Open cheese packages and place in rework containers Assist with Cleaning and Sanitizing of machines and areas after production is finished Keep work area neat, clean and organized Work in a safe, efficient manner in a fast paced environment Other duties as assigned Skills and Qualifications: High School diploma or equivalent Excellent Math, Reading and Writing skills Strong communication skills Strong attention to detail and accuracy Ability to manage multiple priorities while meeting deadlines Ability to work independently on assigned duties Adaptable to sudden changes Willing to learn new skills Be a dependable member of a team Ability to work in Cold and Warm environments Mechanical aptitude Knowledge of computers Must adhere to and follow all Safety, GMP, other quality guidelines Must report all food safety problems to immediate supervisor or designated replacement Must be able to lift up to 55 lbs Schedule: Day Shift 5:30am to 6:00pm Monday - Friday, frequent Saturdays Benefits: Medical - Prescription Drug - Dental - Vision Paid time off (PTO) 401(k) with company match Disability, life and voluntary insurance Employee Assistance Program Profit Sharing Internal Career Opportunities If you are interested in this position you can apply by filling out an application in UKG/Ultipro, you must use the desktop website, not the mobile app.

Bongards Creameries is a member owned Coop that has been operating since 1908. We take pride in our agricultural roots and our mission to provide a sustainable market for our patron's milk. Our vision is to be the best dairy organization and to be an employer of choice in the region. People come to Bongards for a variety of reasons, but they stay because they are valued, listened to and rewarded for their efforts. Job Summary: Bongards' Creameries is seeking a Night Shift Machine Operator based out of our Humboldt facility. The machine operator is responsible for operating and troubleshooting various machines involved in cheese making processes. This is an Entry Level position where the candidate will operate machines on a rotating basis with the goal of a permanent production position. Duties and Responsibilities: Understands and follows set protocols for PPE and Cleanliness (Handwashing, Uniform, Tools, etc) Operation of various machines (filler, casting line, wrapper, former, grinder, massman etc) Monitor quality of boxes, pouches, labels and communicate to other operators Unwrap barrels, ensure cheese packages are made correctly Ensure dry ingredients are placed on pallet according to the blend sheet Open cheese packages and place in rework containers Assist with Cleaning and Sanitizing of machines and areas after production is finished Keep work area neat, clean and organized Work in a safe, efficient manner in a fast paced environment Other duties as assigned Skills and Qualifications: High School diploma or equivalent Excellent Math, Reading and Writing skills Strong communication skills Strong attention to detail and accuracy Ability to manage multiple priorities while meeting deadlines Ability to work independently on assigned duties Adaptable to sudden changes Willing to learn new skills Be a dependable member of a team Ability to work in Cold and Warm environments Mechanical aptitude Knowledge of computers Must adhere to and follow all Safety, GMP, other quality guidelines Must report all food safety problems to immediate supervisor or designated replacement Must be able to lift up to 55 lbs Schedule: Night Shift 5:30pm to 6:00am Monday - Friday, frequent Saturdays Benefits: Medical - Prescription Drug - Dental - Vision Paid time off (PTO) 401(k) with company match Disability, life and voluntary insurance Employee Assistance Program Profit Sharing Internal Career Opportunities If you are interested in this position you can apply by filling out an application in UKG/Ultipro, you must use the desktop website, not the mobile app.

Performs inspection and packaging of plastic parts. Adheres to all plant and OSHA safety policies and regulations. Supervisory Responsibilities: None. Duties/Responsibilities: Must be able to run 2 Injection Mold machines independently by six month mark. Processes manufactured parts per job instructions, pack verified amounts, and label appropriately. Constructs boxes for packing at assigned machine. Visually inspects parts for defects as noted on QPM and sample boards to ensure quality parts are being packed in compliance with specified requirements. May cut off runners with gate cutters and inspect such things as springs or screws to ensure finished part meets specifications. Enters information on log sheets such as in-process books every two hours as quality checks are made to ensure product consistency and conformity to quality standards. Understands production records and is able to keep accurate counts of accepted, rejected and scrapped product as noted on packing logs. Lifts and carries boxes (up to 50 lbs.) to pallets for removal to shipping or storage. On occasion may use pallet jack to move pallets of boxes or totes. Responsible for keeping the assigned work area well organized, clean and neat Alerts shift supervisor of machine malfunction or scrap quantity issues. Maintains effective working relationships with other coworkers Additional duties as assigned. Required Skills/Abilities: Ability to work with coworkers in a team environment. Ability to perform basic math calculations. Ability to maintain and understand records and data, as well as complete required documentation. Ability to use two and four wheeled hand trucks, pallet jacks. Successful Completion of "Fundamentals of Injection Molding" Paulson Training. Continuous mental and visual attention to production of quality products. English language proficiency to include verbal and written communication. Ability to work overtime as required. Must be able to pass all pre-employment screenings. Education and Experience: High School Diploma or GED 0 - 6 months manufacturing experience Physical Requirements: Must be able to stand entire shift (8+ hrs.). Ability to lift up to 50lbs. Requires manual dexterity. Moderate physical demand involving lifting and moving of materials and equipment. Frequently moves from waist level to floor level. Benefits: Medical, Dental, Vision, Life Insurance, Long Term & Short Term Disability, Critical Care and Accident Coverage, Pet Insurance, Wellness Program, Vacation, Sick Time, 401K with Match,9 paid holiday's and work/life balance...plus much more! Equal Opportunity Employer