Service technician jobs in Bayamn, PR

Job Description JOB SUMMARY: Utilities Technician II is responsible for performing maintenance and troubleshooting to mechanical and utilities equipment in a pharmaceutical environment and handle repairs and diagnosis of electrical equipment and major repairs. JOB RESPONSIBILITIES: Perform routine and/or preventive maintenance as needed or assigned by supervisor for the purpose of ensuring the ongoing functions of utilities systems including, but not limited to steam, compress air, reverse osmosis, power generator, chillers, cooling towers, air handling units, and electrical systems. Accurately diagnose problems and or failures in plumbing, air conditioning, mechanical and electrical systems for the purpose of identifying equipment and /or system repairs and replacement needs. Thoroughly inspect Plumbing, Mechanical, HVAC, and electrical systems and their components (not limited to: AHU's, Fans, Chillers, Cooling Towers, Pumps, Water Tanks, Plumbing Fixtures) for the purpose of ensuring safety, evaluating equipment status, and identifying necessary repairs in new and current customers. Follows and enforce ASI's safety program in order to maintain ZERO accidents and Total Compliance. For each service performed prepare detailed documentation (Service Job Report) for the purpose of providing written support in compliance with regulations and or conveying information to clients. Work with limited supervision. REQUIREMENTS: Refrigeration License or Licensed Electrician. Minimum of 5-9 years of previous experience working in a relative environment. Availability to work different shifts on a 24/7 working schedule. Basic English language RO, Controls, Boilers, CHP and Chillers CMMS SKILLS & COMPETENCIES: Good teamwork and leadership skills. Ability to work under pressure. Enough on-hand technical knowledge and skills Strong initiative, self-directed, multi-task and self-motivated. Works with computer software, such as Microsoft Office. Excellent verbal and written communication skills Excellent organizational skills and attention to detail. Excellent interpersonal skills. SUPERVISORY RESPONSIBILITY: This position does not have supervisory responsibilities. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly required to sit/stand, walk, talk/hear. Regular use of hands and fingers to handle. PHYSICAL DEMANDS: Typically associated with this type of position including but not limited to: Ability to sit, stand, and walk up to 8 hours at a time. Ability to lift or carry up to 50 pounds occasionally. Ability to use arms to reach above shoulder and below waist frequently. Ability to use hands for simple grasping and fine manipulation frequently. Ability to balance, bend, climb, crawl, and squat frequently. Ability to be exposed to marked changes in humidity and temperature frequently. SALARY RANGE & BENEFITS: Healthcare coverage with an employer's contribution 12 days' vacation leave 12 days sick leave POSITION TYPE AND EXPECTED HOURS OF WORK: Job Type: Full-Time position Classification: No Exempt TRAVEL: Travel is not required for this position.

Job Description Primary job functions include working under a Field Service Superintendent on projects sites and leading a crew onsite with executing tasks assigned by site superintendent. This includes demolition, installation, operating machinery, such as telehandlers and skid steers, and receiving material at job sites. Lead a crew on a project site without the full-time presence of the site superintendent. Additional job responsibilities include perform tank inspections at tank fabrication sites, oversee installations at the project sites where installation work in being performed by a contractor, performing filter inspections, and assisting the Service Engineer and the Process Controls Engineer with equipment (blowers, actuators etc.) setup during project commissioning. Field service work will be mostly mechanical in nature, with some masonry work. Installation and demolition of some low voltage electrical equipment, mostly field instrumentation may also be required. The job requires a lot of diversity across projects. Field travel is required and may exceed 70% of the time depending on project workload. Travel both domestic and foreign is required. The position has the potential for growth within the Service Department and across the company. The Field Service Tech III will report to the Manager of Roberts Services, while reporting to the assigned project superintendent while on a project site. Field Service Technician III Key Job Responsibilities: · Adhere to company the job site safety standards, maintain and update the required safety certifications. · Execute tasks assigned by site superintendent with minimal supervision. · Lead a crew to perform tasks assigned by site superintendent. · Monitor time and task management of crew and optimize performance. · Perform tank inspections and generate inspection reports. · Perform installation supervision where installation work is performed by a contractor. · Perform filter inspections and generate inspection reports. · Ability to perform in a strong team working environment and grow teamwork. · Be able to operate small and medium grade machinery. · Be able to perform in a construction environment. · Ability to work in permitted and non-permitted confined spaces. · Complete ability to read blueprints and understand project scope of work is required. · Expected to be versatile in performing a broad spectrum of tasks across different project sites. Field Service Technician III Skills and Qualifications: · Valid driver's license · Valid passport or ability obtain a valid passport within the first year of employment · Valid Class A CLD is preferred but not required. · High school diploma or equivalent education. · 3 years of construction experience · Complete ability to read blueprints. · Experience in operation and maintenance of equipment such as blowers, pumps and actuators is preferred but not required. · Basic single phase and DC voltage electrical experience is preferred but not required. · Good oral and written communication skills.

Mentor Technical Group (MTG) provides a comprehensive portfolio of technical support and solutions for the FDA-regulated industry. As a world leader in life science engineering and technical solutions, MTG has the knowledge and experience to ensure compliance with pharmaceutical, biotechnology, and medical device safety and efficacy guidelines. With offices in Caguas, PR, Boston, MA & San Francisco, CA and we serve life sciences clients in six global markets: United States, Puerto Rico, Dominican Republic, Mexico, Germany, Canada, and South America. Responsibilities: Monitoring and operation of the Co-generation System (COGEN) Monitoring, operation and repair of AHU. Monitoring, operation and repair of Chilled Water (Chiller, primary and secondary pumps) Monitoring, operation and repair of the cooling tower. Monitoring and repair in humidity control system Operational monitoring of the automation system in a parenteral plant Monitoring, operation and repair of air compressors Monitoring clean utilities Monitoring to freezers Monitoring, operation and repair of drinking water system Water chemistry tests Execute preventive maintenance, troubleshooting and general repair work on specific assigned working area/site of mechanical, electrical system and equipment. Perform effectively inspections, testing and emptying secondary containment systems (dams) Correct deficiencies found in inspections. Report any spills immediately to your supervisor. Take reading of the hours of operation of boilers and fuel consumption Take reading of the hours of operation of generators and fire pumps Receive diesel for boilers and emergency generators. Ensure that boilers flow meters are calibrated in the set frequency Ensure accuracy of generators and fire pumps data taking. Monitor / document effectively routinely operational parameters to ensure optimum control and regulatory compliance. Report any deviation Provide maintenance to critical measurement equipment and tools, reporting failures and repair if necessary. Other duties as assigned by supervisor. Qualifications Requirements/Knowledge/Education/Skills: Technical College Electrician Degree. Physical Requirements and Working Environment: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, feel, or operate equipment's, tools, or controls. The employee frequently is required to stand, walk, talk, or hear; sit; climb or balance, stoop, kneel, crouch or crawl; and smell. The employee may lift and/or move up to 25-35 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. He / she may frequently work inside weather conditions, near moving mechanical parts, exposed to wet and or humid conditions, and an odorous atmosphere, may be exposed to fumes and the risk of electrical shock, and occasionally work on ladders in high places, in small spaces, such as lift/metering stations, manholes, tanks and wet wells. The noise level in the work environment is usually moderately loud. Mentor Technical Group es un empleador que ofrece igualdad de oportunidades y todos los solicitantes calificados recibirán consideración para el empleo sin importar raza, color, religión, sexo, orientación sexual, identidad de género, información genética, origen nacional, estado de veterano protegido, estado de discapacidad o cualquier otro grupo protegido por ley. Mentor Technical Group is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law.

General Description Will be responsible for performing HVAC equipment preventive maintenance, including troubleshooting & diagnostics, equipment & systems operation log and reports, with minimum supervision, on customers' sites within Puerto Rico and the USVI. Specific Description Preventive Maintenance of industrial and commercial HVAC systems, including electrical, mechanical and control maintenance works associated with it. Inspect, operate, or test machinery or equipment to diagnose machine malfunctions. Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools. Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions. Capacity to drive to customers' sites all over PR and mobility to travel to customers sites in the USVI. Diagnostic & Corrective Repair of industrial and commercial HVAC equipment, including electrical, mechanical and control works associated with it. Evaluation and report of HVAC equipment and systems operation performance. Keeps tools, equipment and personal protection items in excellent conditions by using them correctly and providing proper maintenance according to the fabricant. Work with compressors, condensers, evaporators, motors, expansion and discharge valves, temperature, humidity controls, fans, control panels, switches, fuses, filters, gauges, ducts, piping, tubing, and related HVAC components to have equipment operating in excellent conditions. Documentation of every step of the procedures worked out in the execution of repairs, maintenance and / or occasional retrofit installations. Compliance with EH&S, OSHA and EPA rules & regulations applicable in the HVAC Service business and compliance with the company policies.

General Description Will be responsible for performing HVAC equipment preventive maintenance, including troubleshooting & diagnostics, equipment & systems operation log and reports, with minimum supervision, on customers' sites within Puerto Rico and the USVI. Specific Description Preventive Maintenance of industrial and commercial HVAC systems, including electrical, mechanical and control maintenance works associated with it. Inspect, operate, or test machinery or equipment to diagnose machine malfunctions. Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools. Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions. Capacity to drive to customers' sites all over PR and mobility to travel to customers sites in the USVI. Diagnostic & Corrective Repair of industrial and commercial HVAC equipment, including electrical, mechanical and control works associated with it. Evaluation and report of HVAC equipment and systems operation performance. Keeps tools, equipment and personal protection items in excellent conditions by using them correctly and providing proper maintenance according to the fabricant. Work with compressors, condensers, evaporators, motors, expansion and discharge valves, temperature, humidity controls, fans, control panels, switches, fuses, filters, gauges, ducts, piping, tubing, and related HVAC components to have equipment operating in excellent conditions. Documentation of every step of the procedures worked out in the execution of repairs, maintenance and / or occasional retrofit installations. Compliance with EH&S, OSHA and EPA rules & regulations applicable in the HVAC Service business and compliance with the company policies.

Job Brief: Customer Service Engineer (CSE) is a customer-facing role that primarily installs, services, maintains, and modifies X-Ray modalities like CT, MRI, Ultrasound, and all electronic imaging or not imaging equipment at customer sites. CSE represents the "Company" to our customers. Provide a high level of technical support to our customers while working under minimal supervision. The primary focus of CSE is to provide on-site installations, diagnosing and repairing existing equipment on the field. Other duties include but are not limited to: Perform service at customer sites. Performs preventative maintenance on-site. Modifications and installations on General Radiographic like CR, DR, lasers and Fluoroscopy units, Mammography Portable X-Ray, CT, MRI Urology, and Ultrasound diagnostic imaging equipment at customer sites with minimal supervision. Establish and maintain proper business relationships with customers and peers, as well as perform necessary administrative duties accurately. Complete Field Service Reports. Complete Installation Documentation. Requirements and Qualifications Requires a BA diploma or equivalent in Biomedical and Electrical Engineers with 1-3 years of experience in the field or a related area. Communicate effectively in English and Spanish, verbally and written. Leadership Skills Conflict Management Skill Communication and Presentation Skills Good Organization and Time Management Skills Be Proactive, have a Sense of Urgency, and Pay Attention to Details

GENERAL DESCRIPTION: Responsible for keeping Central Office's common areas clean and in optimal condition at all times. TASKS AND ESSENTIAL JOB RESPONSIBILITIES: 1. Inspect internal and external areas daily, and will inform the immediate Supervisor of any damage. 2. Clean all areas daily in order to maintain a safe and appealing place for employees and visitors. 3. Maintain contact with staff and supervisor to receive and provide information, discuss situations, explain guides and instructions and offer advice. 4. Perform routine maintenance ensuring health and safety measures. 5. Clean and polish vinyl floors and carpets using the equipment necessary this purpose. 6. Provide support to the Clubs and will mobilize if necessary to carry out maintenance-related tasks. 7. Maintain or repair specialized equipment or machinery located in the facilities. 8. Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures. EXPERIENCE, EDUCATION, SKILLS & KNOWLEDGE REQUIRED: - High school diploma. - At least one (1) year or more of experience working in maintenance and/or repairs. - Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. - Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. - Public Safety and Security - Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions. - Building and Construction - Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads. - Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects. - Repairing and Maintaining Mechanical Equipment - Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles. - Monitor Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems. - Documenting/Recording Information - Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form. - Establishing and Maintaining Interpersonal Relationships - Developing constructive and cooperative working relationships with others, and maintaining them over time. - Vehicles, Mechanized Devices, or Equipment - Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or water craft. - Repairing and Maintaining Electronic Equipment - Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles. - Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles). - Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. - Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. DISCLAIMER: The information presented indicates the general nature and level of work expected of employees in this classification. It is not designed to contain, nor to be interpreted as, a comprehensive inventory of all duties, responsibilities, qualifications and objectives required of employees assigned to this job. Equal Employment Opportunity Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

About the Role: We are seeking a highly skilled Critical Utilities Technician to join our team at a GMP-regulated facility. The ideal candidate will have hands-on experience with clean utilities systems, including Clean Steam, Water for Injection (WFI), and other critical utility operations, while holding a valid Electrician License. This role is essential to ensuring reliable, compliant, and efficient operation of utility systems that support manufacturing processes. Key Responsibilities: Operate, maintain, and troubleshoot clean utilities systems, including Clean Steam, Clean Water, WFI. Perform preventive and corrective maintenance on equipment in compliance with GMP, safety, and environmental regulations. Support installation, startup, and qualification of utility systems and related equipment. Monitor system performance, document activities, and ensure compliance with SOPs and regulatory requirements. Collaborate with Engineering, Maintenance, and Production teams to minimize downtime and ensure operational reliability. Respond to emergency utility system issues and support root cause analysis. Requirements: Licensed Electrician (valid and current license required). Minimum 3-5 years of experience in a GMP-regulated facility, preferably in the pharmaceutical or biotech industry. Demonstrated experience with Clean Steam, Clean Utilities, and WFI systems. Strong understanding of GMP, safety standards, and regulatory compliance. Ability to read and interpret technical drawings, P&IDs, and electrical schematics. Excellent troubleshooting skills and ability to work independently or as part of a team. Preferred Qualifications: Experience with Building Management Systems (BMS) and automated controls. Familiarity with calibration requirements for utility systems. Mechanical aptitude for working with pumps, valves, and piping systems. *Shift: Available for 3rd shift* "Drug Free Workplace Policy: In accordance with our commitment to maintaining a safe and productive work environment, all applicants for employment with our company are required to affirm their commitment to a drug-free workplace and consent to pre-employment drug testing as a condition of employment." Share Tech Group is committed to being an equal opportunity employer, fostering a diverse and inclusive workplace where all individuals are treated with respect and provided with equal opportunities for employment and advancement.

For utility services in the manufacturing area. WHAT MAKES YOU A FIT: The Technical Part: Associate Degree with two (2) years of experience in industrial mechanics within the pharmaceutical or regulated industry. Bilingual (English & Spanish). Project Management skills. Shift: 12-hour rotational shift, and according to business needs. 5:00 PM - 5:00 AM 5:00 AM - 5:00 PM Experience in: Preventive maintenance HVAC, pumps, Utilities, and HEPA certification The Personality Part: If you have excellent communication skills and aren't afraid to ask for help when you need it (in addition to your excellent Maintenance skills), this might be the job for you! Sprinkle on a love of the scientific method, teamwork, and, above all else, being ethical, and you just might have what it takes to take on this new challenge. Bring it on! AS A PIECE OF FITS, YOU WILL: (The day-to-day on the job) Execute intermediate maintenance activities or operate and monitor plant support equipment, referring to complex issues or problems. Assist the team with maintaining an up-to-date working spare parts inventory system for the equipment/systems the team is responsible for. Perform various "Housekeeping " activities (e.g., keeping work areas clean, cleaning equipment, etc.). Ensure that operational log paperwork, daily log files, and work order documentation are completed with accurate information. Provide a detailed training program to develop one's knowledge in the maintenance and operations field and other plant areas. Maintain an up-to-date cGMP training book. Develop, revise, and review related SOPs or job plans/work plans for work-related areas. Assist in the evaluation of the current maintenance procedures and recommend changes to optimize the maintenance program. Perform intermediate troubleshooting of utility, process, and HVAC-related equipment/ systems. Plan and schedule own work activities with operations staff to minimize impact on production activities. WHO WE ARE: We are a Service Provider company different from the rest. We pride ourselves in how we treat the most important piece of our company's puzzle: you! We integrate Engineering, Construction, Maintenance, Utilities and Specialized Technical services across the Island (and in the US as well!). Our company is flexible, family-oriented and focused on our resources' well-being, while providing our Pharmaceutical, Medical Device and Manufacturing industry clients with top-notch quality talent. We're FITS! Are you the next piece?

About NCR Atleos NCR Atleos, headquartered in Atlanta, is a leader in expanding financial access. Our dedicated 20,000 employees optimize the branch, improve operational efficiency and maximize self-service availability for financial institutions and retailers across the globe. NCR Atleos was ranked #12 in Newsweek's prestigious 2025 Top 100 Global Most Loved Workplaces list. Title: Field Service Technician II Location: Charleston, SC. Position Summary & Key Areas of Responsibility Are you a Field Technician? Field Engineer? Service Technician? Or do you want to become a member of this field? Are you tech savvy with mechanical aptitude who feels their skills are transferrable? Can you help us to provide best in class service? Do you want to work with some of the largest retailers and banks in the industry? NCR Atleos is looking for Field Service Technicians. NCR Atleos's Field Services Team creates value for our customers by delivering solutions that build long term relationships. Acting as a first line response to our customers, you will communicate in an open, helpful, and engaging manner with the focus being finding the right solution. You will organize, triage customer issues, and even handle some problems before they start. No matter the situation, your formal training (provided through NCR Atleos) will allow you to provide customers what they need when they need it. Our virtual and hands on classroom training enables fast learning and fosters an environment where you can stretch yourself and make an impact. NCR Atleos is committed to growing the capabilities of our people. We are building a learning community where you can work with diverse individuals, explore new ways of thinking, and expand your capabilities. Our service operations have dedicated teachers, mentors and coaches who work across territories to share their knowledge to enhance each other's growth. NCR Atleos is dedicated to building a diverse community, one where employees feel a sense of belonging and teamwork, are valued for their contributions and the perspectives they bring. This role truly keeps commerce running across the globe and is an ambassador for the NCR Atleos Brand. You can expect a salary in the range of $40,800.00 to $59,200.00 on the lower end for less experienced and more for well directly experienced professionals. Utilize your skills to: • Perform customer installation, maintenance, and service calls promptly and effectively • Service electromechanical equipment like ATMs and self-checkout systems within an assigned territory • Perform maintenance repair and system overhauls • Manage everything from network faults and traffic, to configuration, security, and remote system access Basic Qualifications: • Local candidate to specific geographic area • Authorized to work in the US • At least 19 years of age • Have a valid driver's license and driving record that satisfies NCR Atleos fleet requirements • PC skills, basic electronic skills, and operating system familiarity • Ability to perform essential functions of the job with or without a reasonable accommodation o Prolonged travel with driving several hours per day o Rotating and weekend shifts o Carrying and lifting tools, parts, and equipment weighing up to 50 lbs. without assistance o Bending, squatting, walking, standing, sitting, reaching, working with your hands, and repetitively grasping and manipulating objects of varying size Preferred Qualifications to qualify (not required, but nice to have) • Familiarity with large servers, mainframe computers, and imaging software • A+ Certification, CompTIA, N+ Certification • One or more years of related experience #LI-MV1 #LI-remote Offers of employment are conditional upon passage of screening criteria applicable to the job. Full time employee benefits include: Medical Insurance Dental Insurance Life Insurance Vision Insurance Short/Long Term Disability Paid Vacation 401k EEO Statement NCR Atleos is an equal-opportunity employer. It is NCR Atleos policy to hire, train, promote, and pay associates based on their job-related qualifications, ability, and performance, without regard to race, color, creed, religion, national origin, citizenship status, sex, sexual orientation, gender identity/expression, pregnancy, marital status, age, mental or physical disability, genetic information, medical condition, military or veteran status, or any other factor protected by law. Statement to Third Party Agencies To ALL recruitment agencies: NCR Atleos only accepts resumes from agencies on the NCR Atleos preferred supplier list. Please do not forward resumes to our applicant tracking system, NCR Atleos employees, or any NCR Atleos facility. NCR Atleos is not responsible for any fees or charges associated with unsolicited resumes.

Responsibilities may include the following and other duties may be assigned. Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. TECHNICIAN SUPPORT CAREER STREAM: Provides technical support in areas such as production, operations, maintenance, safety, testing, process improvement or product development. Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles, and manipulates technical data using established formulae and procedures, and performs detailed mathematical calculations. For higher levels, may suggest and/or make improvements to optimize work processes. DIFFERENTIATING FACTORS Autonomy: Seasoned individual contributor, working under limited supervision, and providing assistance and training to lower level employees. Runs minor projects, including performing tests, interpreting data, developing reports. Organizational Impact: Performs technical activities requiring considerable judgment and may have ownership of minor projects. Work consists of technical tasks that are typically not routine. Innovation and Complexity: Technical problems faced are general, and may require some analysis to understand and resolve. Expected to independently propose solutions to problems for supervisor review. Communication and Influence: Communicates typically with internal contacts . Obtains and provides technical information on matters of moderate importance to the job area. Leadership and Talent Management: Responsible for providing guidance, coaching and training to other employees within job area. Required Knowledge and Experience: Requires complete and broad knowledge of operational systems, techniques and practices typically gained through extensive experience and/or education. Requires minimum of 4 years of relevant experience; may require vocational or technical education or certification in addition to prior work experience.

Are you a hands-on problem-solver looking for flexible, project-based work? Join T-ROC's FLEX-ROC team as a Retail Display Technician ? Mobile, supporting the installation, maintenance, and repair of electronic displays and security systems in leading national retail environments such as Best Buy, Walmart, and Target. This role is part of a pre-qualified talent pool activated as business needs arise in your area. You'll be notified of available assignments and have the freedom to accept only the projects that fit your schedule. It's an ideal opportunity for those who enjoy technical work, variety, and independence?without the commitment of a fixed daily routine or guaranteed hours. Whether you're seeking supplemental income or dynamic project work, FLEX-ROC offers a way to put your skills to use in real-world retail settings. Here are the details: * Independently execute installation and break/fix projects for retail displays, security systems, and electronic components. * Merchandise products according to specifications. * Troubleshoot and resolve technical issues as they arise. * Maintain accurate documentation of installation procedures, configurations, and issue resolutions, using company-approved platforms or tools. * Support the installation, configuration, and troubleshooting of proprietary security systems, ensuring adherence to company protocols and industry standards. * Collaborate with team members to install electronic components such as sensors, touch screens, interactive consumer displays, TVs, alarms, and access control systems as part of security setups. * Participate in merchandising activities, including product placement, inventory management, and ensuring displays are visually appealing and aligned with brand guidelines. * Provide on-site technical support during retail store openings, renovations, refreshes and special events, ensuring timely resolution of any issues that may arise. * Maintain accurate documentation of installation procedures, configurations, and issue resolutions, using company-approved platforms or tools. * Safely transport, set up, and manage tools, materials, and equipment needed for project execution, ensuring proper care and accountability. * Travel independently to assigned locations using personal or rental transportation as needed; adhere to mileage reimbursement and safety guidelines. Qualifications: * You thrive in a collaborative environment. * You follow safety guidelines and company protocols to protect yourself, your team, and the customer's environment. * You can quickly adjust to shifting client needs, troubleshoot unexpected issues on-site, and find effective solutions with limited resources. * You are comfortable using mobile apps and digital tools to accept assignments, track work, and submit documentation. * Ability to travel locally to job sites as assigned (often on short notice) * Must possess a valid driver's license, meet the requirements to pass a motor vehicle record (MVR) check, and carry/maintain auto insurance that meets the minimum coverage requirements as defined by T-ROC. * Physical exertion (standing, pulling, pushing, kneeling, bending, stretching, lifting 50+ lbs if needed) will be required during the shift. * Requires repetitive wrist, hand, and figure movement, and ability to use tools requiring high dexterity. Why You'll Love This Job: * Transform retail spaces and make your mark. * Join a supportive group that celebrates your successes. * Competitive pay, discounts, and opportunities for growth. Who is T-ROC? At T-ROC (The Revenue Optimization Companies), we blend innovation, technology, and an energetic team spirit to revolutionize retail. We're a dynamic and forward-thinking company that thrives on creativity and collaboration. Our mission is to empower businesses to achieve new heights in sales and customer engagement through cutting-edge technology and data-driven strategies. With us, you'll join a vibrant community where your ideas matter, your growth is encouraged, and every day brings new opportunities to make an impact. Ready to rock your career with T-ROC? Join us and be part of something extraordinary! Equal Opportunity Employer / Special Accommodations T-ROC is an equal opportunity employer, committed to the full inclusion of all qualified individuals. All applicants are considered for all positions without regard to race, religion, color, sex, gender, sexual orientation, pregnancy, age, national origin, ancestry, physical/mental disability, medical condition, military/veteran status, genetic information, marital status, ethnicity, alienage or any other protected classification, in accordance with applicable federal, state, and local laws. Equal access to programs, services, and employment is available to all qualified persons. As part of this commitment, T-ROC ensures that reasonable accommodation is provided to applicants requiring such accommodation to complete the application and/or interview process. If reasonable accommodation is needed, please email [email protected] describing your needs. Salary Range: $20.00 - $20.00 per hour

Every day at Disney Cruise Line we take pride in bringing the magic of Disney to life. We find joy in creating cherished memories and form genuine connections with our guests. We hold each other to the highest degree and always act responsibly while ensuring the safety of fellow crew and guests. United by our Disney values, we work toward excellence in all we do. As a part of our team, you can live and work in a diverse and inclusive environment amidst a professional and supportive community. If you are ready to create unforgettable experiences and grow as a person and as a professional, apply today. As a Costume/Cosmetology Technician you will work with the Cast of our Broadway/West End Style Musical Theater Production Shows and ship wide Entertainment Offerings by providing costuming support, stage makeup assistance and styling, care and maintenance of performer wigs. You will report to Senior Technician Costume **Responsibilities :** + Oversee the care and maintenance of all Cosmetology associated with ship wide Entertainment offerings + Maintain, style and care for all theatrical wigs + Assist performers with stage makeup including airbrush and prosthetic applications + Inventory cosmetology supplies + Help with the care of all costumes including laundering, hand sewing and machine stitching + Run dressing tracks for shows, set costumes, and assist with quick changes + Ensure the integrity of all entertainment events ship wide **Basic Qualifications :** + Minimum two years of industry related experience + Skills with styling, care and maintenance of theatrical wigs + Knowledge of stage makeup applications including air brushing and prosthetics + Experience in a theatrical environment including running dressing tracks and quick changes + Familiarity with hand sewing and machine stitching **Additional Information :** This is a **SHIPBOARD** role You must: + Be genuinely interested in a career at sea and willing to live and work onboard a Disney Cruise Line vessel + Be willing to follow and perform safety role, emergency responsibilities and associated responsibilities as specified in the ship Assembly Plan + Be willing to uphold the general safety management responsibilities as specified in the Safety Management System in areas and operations under their control + If applicable, be willing to share a confined cabin with other crew members and appreciative of working and living in a multicultural environment that has strict rules and regulations Your Responsibilities: + Have a valid passport and C1/D Seaman's visa (DCL will provide you with documents to obtain this) + Complete a pre-employment medical + Obtain a criminal background check + Bring approved work shoes ** _Disney Cruise Line_ is a drug-free workplace. All new hires are required to undergo drug/alcohol testing within the first week onboard and throughout their contracts. Failure to pass the drug/alcohol testing will result in immediate termination. \#DCLPJ **Job ID:** 1249193BR **Location:** United States **Job Posting Company:** "Disney Cruise Line" The Walt Disney Company and its Affiliated Companies are Equal Employment Opportunity employers and welcome all job seekers including individuals with disabilities and veterans with disabilities. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email Candidate.Accommodations@Disney.com with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.

Global Industrial For over 70 years Global Industrial has been an industry leader providing private label and brand name industrial equipment and supplies to businesses throughout North America. We carry over one million industrial, material handling and business products that are sold through our website, corporate sales people and full color catalogs. We are constantly increasing our product offerings to meet the diverse and changing needs of our customers. Our customers include small to large corporations, institutions, government agencies and consumers across North America. Key Responsibilities * Responsible for providing outstanding CUSTOMER SERVICE. * Visually inspects, tests, and listens to machines and equipment to locate causes of malfunctions. * Discusses machine operation variation with customers to diagnose problem and repair machines. * Dismantles machine parts to detect wear, misalignment, or other problems. * Removes and replaces worn or defective parts. * Installs new or repaired parts; clean and lubricates shafts, bearings, gears, belts and other parts of machinery. * Realigns and adjusts components such as spindles and clutches. * Installs and repairs electronic components of machinery of equipment. * Start machines and equipment to test proper operation following repair. * Organize and plan with dispatcher follow-up repairs on equipment when all ordered parts have been received. * Organize with dispatcher scheduled repairs and PM's at similar locations on the same day, as time and location permits. * Organize new service requests with dispatcher in the same working area, as time permits. * Complete timecards accurately and completely throughout the day * Responsible for record keeping and reporting of work orders, parts, supplies ordering, and a daily agenda. * Complete work orders, submit parts orders and all required paperwork through tech portal / ERP System while at each location. * Organize parts received for van stock and follow up customer repairs. * Work efficiently together with dispatcher for most productive route each day. * Treats company equipment (i.e. vehicle, tools, phone, fax, credit card, and parts) as if they were his/her own and follows PM's guidelines on company provided vehicle. * Performs additional duties, tasks, responsibilities, as a supervisor may, from time-to time, deem necessary. * Work safely in different types of environments and always putting SAFETY FIRST. Competencies and skills * High school diploma or general education degree (GED); good mechanical aptitude/skills. * Self-starter with entrepreneurial spirit who operates business within the framework of each customer's business structure. * Good driving record. * Ability to read, write, and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Excellent time-management skills. LANGUAGE SKILLS * Possesses excellent communication skills; both verbal and written with ability to communicate effectively to customers. REASONING ABILITY * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. * Detail oriented * Excellent listener * Determination to be own manager * Skilled in the use of hand and mechanical tools * Owns or can purchase or borrow basic standard and metric mechanical tools, gear puller, and three-drawer tool chest * Quality Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; monitors own work to ensure quality * Safety and Security Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly * Dependability: * Excellent attendance * Responds to service request in a timely manner - High Sense of Urgency * Follows instructions, responds to management direction * Takes responsibility for own actions * Maintain a valid driver's license and safe driving skills * Must, at all times meet state and federal regulations Physical Demands * While performing the duties of this job, the associate is occasionally required to drive long hours. The associate is regularly required to sit; use hands to finger, handle or feel; reach with hands and arms; stoop, kneel or crouch; talk or hear and taste or smell. * The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds. * Grease Tank Installers will need ability to move tanks up to 400lbs with hand truck/dolly. * Grease tank installers will need to be able to work on a ladder running overhead piping. * Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT * Travel up to an average of 300 miles per day * Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals. MISCELLANEOUS * Income is based an hourly pay structure, with a ½ hour start of the day and end of the day reduction for commute time. EEO/AA Statement Global Industrial provides equal employment opportunities to all employee and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absences, compensation and training.

Job Description The HVAC & Refrigeration Technician is responsible for maintaining, repairing, and troubleshooting heating, ventilation, air conditioning, and refrigeration systems throughout the hotel. This includes guest rooms, kitchens, common areas, and back-of-house systems. The ideal candidate will have a strong technical background, excellent problem-solving skills, and a proactive approach to maintenance and repair tasks. Education & Experience: • Accredited trade school or college course work in HVAC. • Minimum 3 years of hands-on HVAC and refrigeration experience, preferably in a commercial or hospitality setting. • Be an active member of the CTRAPR (required). • Working knowledge of HVAC control systems, electrical systems, and plumbing related to HVAC/R. Skills and Competencies • Excellent communication and teamwork abilities. • Ability to read and interpret blueprints, wiring diagrams, and technical manuals • Strong troubleshooting and diagnostic skills • Knowledgeable in electrical systems, including safe handling of high-voltage components • Safety-conscious with strong knowledge of relevant codes and compliance standards • Proactive and preventive maintenance mindset, contributing to long-term equipment reliability and guest satisfaction Physical Requirements • Frequent standing, walking, bending, kneeling, and crouching throughout the shift • Manual dexterity and hand-eye coordination to use tools and equipment safely and effectively • Ability to tolerate exposure to varying indoor and outdoor environments, including heat, humidity, and cold • Capable of working in confined spaces such as crawlspaces, ceilings, and mechanical rooms • Flexibility to work varying shifts, including nights, weekends, holidays, and sometimes long hours. • Heavy work - Exerting in excess of 100 pounds of force occasionally, and/or in excess of 50 pounds of force frequently and/or in excess of 20 pounds constantly to lift, carry, push, pull, or otherwise move objects.

QUALITY CONSULTING GROUP, a leader in the pharmaceutical, biotech, medical devices, and manufacturing industry, is looking for a talented, highly motivated and enthusiastic to join our team. In this role, you'll work with a highly enthusiastic team, contributing in a world-class manufacturing industry in Puerto Rico & USA. Responsibilities: Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Qualifications: Technicial degree in related area 0-2 years of relevant experience. Responsibility (punctuality, organization, etc.) Must have good communication skills and ability to learn. Basic Technical Knowledge (mechanical tools, computer, documentation, etc.) P.C. literate (Microsoft Word, Excel, Power Point, Outlook). Shift: 3rd shift starting 5:00 pm - 5:00 am (12-hour shift) Week 1: Mon to Wed Week 2: Thur to Sun Available to work overtime. Quality Consulting Group, LLC is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law.

MASTER TECHNICIAN Primary Duties: The Master Technician's primary responsibility is to add value to each client's transaction ensuring that they are satisfied with their experience buying at Western Auto and that upon leaving the store are completely satisfied with their purchase. Using knowledge and technical skills, removes, repairs, or replaces and installs automotive parts using the tools, equipment, or the manual procedures that are safe and appropriate. Performs other automotive mechanical services as needed and authorized. Reads and comprehends training manuals, service tickets, etc. Has extensive knowledge about vehicles and Western Auto services that include brakes, alignment, air conditioning, suspension, front wheel assembly repair, and all installation jobs. Checks basic elements of the vehicle according to Western Auto's methods for mechanical, electric, and courtesy inspections. Uses the diagnostic and alignment machines correctly. Has a valid driver's license, vehicle insurance, and the ability to drive cars with manual or automatic transmissions. Must have their own tools. Handles a fast-paced work environment, stress, and stressful situations in a professional manner. Answers customer's questions related to finished service work and the vehicle's related problems. Provides training and technical guidance to new associates and workmates. Operates the workshop lifts appropriately. Is competitive and has a team player's attitude. Follows Western Auto and OSHA requirements to promote and provide a safe workplace. Follows EPA standard in terms of the work requirements, specifications, and materials management. Performs maintenance tasks that include sweeping/mopping the workshop floor, cleaning/maintaining the equipment, emptying the garbage bins, cleaning the parking area, etc. Follows the company guidelines in terms of protection, safety, hygiene, and the dress code. Physical Requirements: This job requires continually standing, bending, kneeling, twisting, turning around, climbing, and lifting and carrying weights up to approximately 75 lbs. (sometimes the weight will exceed 75 lbs). Adapts to temperature changes, to the summer heat and winter cold. Performs additional tasks as required. Master Technician Training Requirements: Maintains up-to-date ASE certification in: A4 Steering and Suspension, A5 Brakes, A6 Electronics/Electrical Systems, A7 Heating and Air Conditioning. Possesses a certification approved by the Environmental Protection Agency (EPA) R-12/R134a for Recovery/Recycling. Completes the Western Auto/Parts America orientation training. California Residents click below for Privacy Notice: ***************************************************

Job Description Se habla español. Para aplicar en español, haga clic trabajos.compassgroupcareers.com(opens in a new tab). We have an opening for a full time HVAC TECH position. Location: AstraZeneca - Carr 188, San Isidro Industria, Canovanas, PR 00729. Note: online applications accepted only. Schedule: Full time schedule. Monday through Friday, first shift. Days and hours may vary. Further details upon interview. Requirement: Previous HVAC license required. Pay Range: $17.00 per hour to $18.50 per hour ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1488647. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: *************************** Skg Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM's clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: The HVAC Maintenance Technician performs a variety of skilled maintenance duties related to the facilities engineering and maintenance functions and is assigned to work for a Supervisor, Foreman, and/or Master Mechanic on a regular basis. Incumbent is guided by a comprehensive and proven skill in one trade as evident by possession of an appropriate license from the state. Within the incumbent's chosen trade, he/she will work independently to analyze and correct complex problems and ensure that non-license workers perform work in a manner consistent with correct work practices. Essential Duties and Responsibilities: Updates work statuses and documents tasks completed in the CMMS utilizing a mobile device. Helps determine manpower, material needs, and deadlines for jobs and projects. Cleans, lubricates, services, repairs, and diagnoses malfunction of HVAC, electrical and mechanical building systems, sterilizers, food service equipment, sprinkler and standpipe systems, transport systems, electronic signaling systems, fire alarm systems and similar plant and specialty equipment items Assists in making decisions on all repairs and reports major problems to the Maintenance Supervisor, Foreman, and Manger as appropriate. Constructs, finishes, installs, maintains, and repairs electrical and mechanical systems, or the facilities of any related systems, using power & hand tools and other necessary equipment. Reviews outside vendor projects and makes punch lists. Analyzes and corrects complex building system problems and electro/mechanical problems related to utilities. Supports project management activity as needed. Responds to emergency problems in the facility and makes emergency repairs as needed. Maintains logs, performs rounds, and completes P.M. work orders, tests, and inspections. Makes recommendations for modification or improvement of preventive maintenance systems. Maintains shops and mechanical areas in a clean and safe manner. Preforms other duties as assigned. Qualifications: 5 years' experience as a Maintenance Technician in an institutional setting in an engineering or maintenance discipline. One of the following: Journeyman Electrical License, Registered ACR Technician with EPA certification in Refrigerant, or Journeyman Plumber License. Experience working with blueprints and schematics. Valid driver's license. A general understanding of electro-mechanical equipment. Rudimentary ability to utilize hand-operated construction equipment. Ability to repeatedly lift 50 pounds and kneel/bend/stoop and perform strenuous labor for extended periods of time. Working Conditions: Some exposure to elevated degrees of high heat, noise, dust, dirt and/or areas requiring infection control. Requires meeting deadlines for completion of work on a daily basis. Must be able to work all hours, including weekends and nights, as necessary, in order to maintain facility at the appropriate and safe level. Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. ************************************************************************************* About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

*Quality Technician** • Conducts investigation of quality issues and documents as per established policy. Assures product containment within available systems. • Gathers information for the quality engineers, in order to address product issues • Performs analysis using lean sigma tools as part of quality issue investigations. • Assists in the development of training and working standards including, but not limited to, visuals, pictorials, or other mechanisms. • Assists Quality Engineering in the development / implementation of procedures, work instructions or forms, as required. • Performs quality audits to the manufacturing line and rearrange schedule based on trending. • Provides direct support to the production line and operators related to quality issues. • Provides adequate tools and equipment to ease device inspection. • Present data or explains situations affecting quality to manufacturing personnel when required. • Prepares material and data to be presented in quality review meetings. • Works and implement special projects when required including but not limited to CAPA, Continuous improvement projects, etc. • Evaluates product/material discrepancies (PRB/MRB), and implement corrective actions on a timely manner • Performs qualifications / validations for product/processes and equipment, as required. • Assess adequacy of process inspection points based on process FMEAs. • Supports product transfers and new implementations. • Assists in the investigations of quality issues and non-conforming situations as required. • Prepares and presents trend data pertaining to the calibration area during monthly Quality Review meetings. • Assists in gathering of information during FDA inspections, Notified Body Audits, Corporate Audits, etc. • Perform other position duties as assigned. • Support manufacturing course/certification in the applicable LMS System. • Support on-the-job training plan to assure personnel compliance. • Works with document changes in the applicable system (ex. change of manufacturing / quality document changes in Agile)