Fabricator jobs at Shoreside Petroleum

Job Description SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor. Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations. Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements. Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data. Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation. Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive. Immediately report all symptoms or suspected symptoms as early and accurately as possible. Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation. Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others. Assist in the training of new personnel or tenders. Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits. Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site. Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others. Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance. Ensure their medical certificates are up to date and recorded in their logbook. Present their logbook to the Diving Supervisor on every job. Maintain current certification in first aid and CPR. Complete administrative office duties as assigned. JOB REQUIREMENTS: Graduate of a professional diving school. Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability. Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld). Significant physical effort required. Significant exposure to physical risk. Ability to pass annual diving physical. Ability to obtain a U.S. Government security clearance. Able and willing, to travel worldwide, on short notice for indefinite periods of time. Ability to pass a pre-employment drug/alcohol screen and physical, as required. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status

1st Class Structural Fitter - 2nd Shift Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A First-Class Structural Fitter with Stellar Energy will have experienced knowledge of industrial structural fitting, assembly, & welding. As well as various terminologies, blueprint reading, measurements, take outs, and job specifications to build an integrally complete erection system. Complies with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. Prepares for ISO 9001 and other audits. What We're Looking For Must Have's: 5+ Years' experience in Industrial Structural Fitting Proficient in reading and interpreting blueprints and technical drawings. Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary to jamb-nut completion. Ability to perform accurate measurements and calculations. Excellent problem-solving skills and attention to detail. Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE High School Diploma or GED Must be authorized to work in the USA Nice to Have: 6+ Years' experience in Industrial Structural Fitting. Tack welding ability Some vocational technical training Familiarity with Flux-core welding techniques What We Offer Retention Bonuses - Quarterly bonuses in the amount of $300.00 Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment. 401k program - Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match. 3-Weeks Paid Time-Off 10-Paid holidays a year Safety Boot Program - $100.00 reimbursement for the purchase of safety boots, yearly. Gym Membership 2nd Shift Differential - 10% What We Pay Starting at $25 / hourly What Hours You Will Work This is a full-time position. Second shift days and hours of work are Monday through Friday, 3:00 pm to 1:30 am. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Selects type and size of pipe or other related materials and equipment according to specifications. Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. Lays out, positions, aligns and fits components together in various body positions. Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. Responsibilities Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. Qualifications Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. Capable of producing welds that will meet NDE (non destructive examination) requirements

Our Mission: Bishop Lifting Products, Inc. is the most trusted name in the lifting world. It has the deep expertise, services, and support to solve both routine and complex lifting challenges. We have the above and below-the-hook inventory customers need when they need it. And we have a culture of service and support that puts customer satisfaction first. Job Purpose: Fabricate and refurbish wire rope slings and other lifting assemblies. Key Duties and Responsibilities: Fabricate and repair wire rope slings and assemblies; and Achieve qualification as an apprentice (minimum) or journeyman splicer. Perform other functions as required. Job Requirements: Must have experience in manufacturing role working with various tools. Must be able to lift up to 70 pounds. Must be comfortable standing for extended periods of time. Must be authorized to work in the United States without sponsorship Must be at least 18 years of age Must be able to pass a pre-employment drug test, physical and background check (including MVR) Bishop Lifting Products, Inc. and it's subsidiaries are an Affirmative Action and Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Are you looking for an opportunity to become part of a rapidly-growing industry? Bishop Lifting Products, Inc. is looking for talent that will hold true to our mission while maintaining the safety and knowledge that we have valued since we were founded in 1984. Apply today! We're ready to help you start your new career path.

1 st Class Structural Fitter - 2 nd Shift Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A First-Class Structural Fitter with Stellar Energy will have experienced knowledge of industrial structural fitting, assembly, & welding. As well as various terminologies, blueprint reading, measurements, take outs, and job specifications to build an integrally complete erection system. Complies with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. Prepares for ISO 9001 and other audits. What We're Looking For Must Have's: 5+ Years' experience in Industrial Structural Fitting Proficient in reading and interpreting blueprints and technical drawings. Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary to jamb-nut completion. Ability to perform accurate measurements and calculations. Excellent problem-solving skills and attention to detail. Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE High School Diploma or GED Must be authorized to work in the USA Nice to Have: 6+ Years' experience in Industrial Structural Fitting. Tack welding ability Some vocational technical training Familiarity with Flux-core welding techniques What We Offer Retention Bonuses - Quarterly bonuses in the amount of $300.00 Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment. 401k program - Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match. 3-Weeks Paid Time-Off 10-Paid holidays a year Safety Boot Program - $100.00 reimbursement for the purchase of safety boots, yearly. Gym Membership 2nd Shift Differential - 10% What We Pay Starting at $25 / hourly What Hours You Will Work This is a full-time position. Second shift days and hours of work are Monday through Friday, 3:00 pm to 1:30 am. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: * Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor. * Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations. * Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements. * Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data. * Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation. * Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive. * Immediately report all symptoms or suspected symptoms as early and accurately as possible. * Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation. * Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others. * Assist in the training of new personnel or tenders. * Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits. * Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site. * Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others. * Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance. * Ensure their medical certificates are up to date and recorded in their logbook. * Present their logbook to the Diving Supervisor on every job. * Maintain current certification in first aid and CPR. * Complete administrative office duties as assigned. JOB REQUIREMENTS: * Graduate of a professional diving school. * Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability. * Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld). * Significant physical effort required. Significant exposure to physical risk. * Ability to pass annual diving physical. * Ability to obtain a U.S. Government security clearance. * Able and willing, to travel worldwide, on short notice for indefinite periods of time. Ability to pass a pre-employment drug/alcohol screen and physical, as required. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status

Selects type and size of pipe or other related materials and equipment according to specifications. Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. Lays out, positions, aligns and fits components together in various body positions. Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. Capable of producing welds that will meet NDE (non destructive examination) requirements Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy.

Structural Fitter Position Type:Full-time, Non-Exempt, Hourly Reports to:General Superintendent/Fabrication Manager Supervisory Responsibility:None ________________________________________ Company Summary Stellar Energy provides custom power augmentation and energy plant solutions for power generation and utilities, liquefied natural gas (LNG), data center, biopharma and other markets. Stellar Energy's innovative solutions include turbine inlet air chilling, inlet air conditioning (heating and cooling), evaporative cooling, direct contact air chilling, thermal energy storage, district cooling and central utility plants. The company's experience spans more than 20 years and stretches across the globe, with offices in the United States, Asia and the Middle East and North Africa (MENA) region. Summary Objective To have experienced working knowledge of the Industrial Structural Fitting, Assembly & Welding Industry and the various terminologies, blue print reading, measurements, take outs, job specifications, etc., to build an integrally complete erection system. Essential Functions •Fluent in understanding job specification, blue print reading, target point measurements, true /plumb /square checking, and any necessary torque requirements, for large industrial structural steel systems. •The ability to cut, prep, fit and tack small to large; HSS box tubes, Angle, W-members, Flat Plate, etc., from various material types through true-plumb-square; into weld ready status, by the use of isometric and structural drawings, while adhering to specific fit tolerance requirements. •The ability to properly select, measure, hand dress, score and cut with torch, air arc, plasma, grinder, power saws, hand tools, etc., as necessary to prepare metal surfaces for welding process to be completed per job specific requirements. •Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary through jamb-nut completion. •Strong structural aptitude and problem solver who can understand and follow instruction. •Accountability for completion of daily work assignments while monitoring quality, safety and health regulations. •Operate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques. •Safely and efficiently direct and monitor two or more helpers. •Documentation of all quality reporting methods employed per SEA Quality Standards. •Complies with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. •Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies •Collaboration Skills •Reliable Attendance •Decision Making •Leadership •Communication Proficiency; Written and Verbal •Ethical Conduct •Problem Solving •Organizational Skills •Thoroughness •Time Management Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. First shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift days and hours of work are Monday through Thursday, 2:30 p.m. to 1:00 a.m. Occasional weekend work may be required as job duties demand. Travel Travel is primarily not required with exception to local travel during the business day. Required Education and Experience •High school diploma or GED •Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting. •5+ Years' related experience or training Preferred Education and Experience •6+ Years' experience in Industrial Structural Fitting. •Tack Welding Ability •Some vocational technical training is desired Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. ________________________________________ Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

2nd Class Welder Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing Performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. Willingness to cross train for multi-function structural and piping assembly processes. Fluent in understanding job specific WPS / PQR's and capable of setting machine up for performance in all positions to certify testing criteria. Analyze blueprints for weld insignia and the application thereof to assembly components on piping and structural systems. The ability to identify correctly, measured, hand dressed, cut and fit prepare metal surfaces for welding process to be completed per job specific requirements. Capable of visual observation of pre- and post-welded surfaces; and the interpretation of fulfilled job requirements with micrometer, caliper and other precision measuring instruments. Technically proficient in the interpretation of insufficient weld criteria and knowledge to efficiently blend to repair. Complies with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. Prepares for ISO 9001 and other audits. What We're Looking For Must Have's: 1-2 years' experience welding. High school diploma or equivalent (preferred). Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting Fluent in understanding job specific WPS / PQR's and capable of setting machine up for performance in all positions to certify testing criteria Ability to work in confined spaces and wear protective gear for extended periods. Strong attention to detail and a safety-conscious mindset. Good physical condition; able to lift heavy materials and work in various positions. Nice to Have: 4+ Years' experience in Welding SMAW, FCAW and GTAW, or a combination. 2 years of vocational technical training What We Offer Retention Bonuses - Quarterly bonuses in the amount of $300.00 Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment. 401k program - Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match. 3-Weeks Paid Time-Off 10-Paid holidays a year Safety Boot Program - $100.00 reimbursement for the purchase of safety boots, yearly. Gym Membership 2nd Shift Differential - 10% What We Pay Starting at $22 / hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Structural Fitter Position Type:Full-time, Non-Exempt, Hourly Reports to:General Superintendent/Fabrication Manager Supervisory Responsibility:None ________________________________________ Stellar Energy provides custom power augmentation and energy plant solutions for power generation and utilities, liquefied natural gas (LNG), data center, biopharma and other markets. Stellar Energy's innovative solutions include turbine inlet air chilling, inlet air conditioning (heating and cooling), evaporative cooling, direct contact air chilling, thermal energy storage, district cooling and central utility plants. The company's experience spans more than 20 years and stretches across the globe, with offices in the United States, Asia and the Middle East and North Africa (MENA) region. Summary Objective To have experienced working knowledge of the Industrial Structural Fitting, Assembly & Welding Industry and the various terminologies, blue print reading, measurements, take outs, job specifications, etc., to build an integrally complete erection system. Essential Functions •Fluent in understanding job specification, blue print reading, target point measurements, true /plumb /square checking, and any necessary torque requirements, for large industrial structural steel systems. •The ability to cut, prep, fit and tack small to large; HSS box tubes, Angle, W-members, Flat Plate, etc., from various material types through true-plumb-square; into weld ready status, by the use of isometric and structural drawings, while adhering to specific fit tolerance requirements. •The ability to properly select, measure, hand dress, score and cut with torch, air arc, plasma, grinder, power saws, hand tools, etc., as necessary to prepare metal surfaces for welding process to be completed per job specific requirements. •Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary through jamb-nut completion. •Strong structural aptitude and problem solver who can understand and follow instruction. •Accountability for completion of daily work assignments while monitoring quality, safety and health regulations. •Operate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques. •Safely and efficiently direct and monitor two or more helpers. •Documentation of all quality reporting methods employed per SEA Quality Standards. •Complies with all company policies, procedures and safety requirements and physically / medically qualified to wear required PPE per OSHA standards. •Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies •Collaboration Skills •Reliable Attendance •Decision Making •Leadership •Communication Proficiency; Written and Verbal •Ethical Conduct •Problem Solving •Organizational Skills •Thoroughness •Time Management Supervisory Responsibility This position has no supervisory responsibilities. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. First shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift days and hours of work are Monday through Thursday, 2:30 p.m. to 1:00 a.m. Occasional weekend work may be required as job duties demand. Travel Travel is primarily not required with exception to local travel during the business day. Required Education and Experience •High school diploma or GED •Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting. •5+ Years' related experience or training Preferred Education and Experience •6+ Years' experience in Industrial Structural Fitting. •Tack Welding Ability •Some vocational technical training is desired Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. ________________________________________ Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.