Assembler jobs at Siemens - 310 jobs

Eaton's IS AER ITD division is currently seeking a Assembler II. The hourly rate for this position is $20.00 per hour. The hours for this shift are 7:00 am - 3:30 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: PRIMARY FUNCTION: Assembler role will assemble, fit, fasten, and install parts to form subassemblies. Align, fit, assemble, fasten, connect, and install system components of military mechanical/electromechanical equipment. ESSENTIAL FUNCTIONS: * Setup equipment to meet product standards for identification, shell painting, retainer loading, contact painting, wire cutting, riveting, contact crimping and contact hooding. * Weigh, mix and identify items such as inks, paints, adhesives, molding compounds, and potting materials. * Follow intermediate drawings and procedures. * Perform work with limited to no supervision. * Support cross training and support of other departments. * Manually load and/or machine load retainers into molded plastic inserts per work order instructions. * Bond loaded front inserts to molded plastic rear inserts per work order instructions. * Bond interface seals and grommet seals to plastic insert assemblies per work order instructions. * Rework and/or repair assembled parts and products according to engineering specification changes. * Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, and follows procedures. * Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. * Assemble and bond EMI rings to connector shell per work order instructions. * Assemble and bond EMI rings to connector shell per work order instructions. * Apply identification stamping to various components and assemblies. * Paint components, as well as apply paint stripe markings to contacts. * Work in a safe manner and perform housekeeping duties to maintain safe work environment. Assure proper maintenance of a safe and clean work area. * Stage materials for shipment as required. * Prepare single and shielded wires for termination, crimp contacts to prepared wires, terminate simple cables to connectors, and load and operate heat treat and annealing ovens. * Soldering contacts and application of solvents and epoxies. * Other duties as assigned. Qualifications: BASIC QUALIFICATIONS: * High School diploma or GED from an accredited institution * Minimum of 1-3 years with Manufacturing Environment experience * Must be able to work in the United States without corporate sponsorship now and within the future. * This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. PREFERRED QUALIFICATIONS: * Detailed knowledge of Aerospace product, manufacturing processes and inspection techniques. * Experience in aerospace products and applications. * Excellent communication and presentation skills - both verbal and written * Ability to read, follow and understand verbal instruction, product/ process specifications, drawings, and work orders in English. * 2-3 years' experience in related mechanical manufacturing assembly operations * Ability to use calculators. * Ability to lift 30 lbs. and handle components and assemblies using bending, reaching, and twisting body movements; in addition to use of hand tools. * Ability to recognize and inform supervision of assembly problems and equipment breakdown. * Good manual dexterity to assemble small and intricate parts. * Soldering experience Additional Information: * Strong ethics, values and the ability to influence others' decision-making. * Must exhibit a high level of motivation, sense of urgency, and energetic approach to job duties and requirements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER FMC division is currently seeking a Assembler II- 1st Shift. The hourly rate for this position is $22.50 per hour. The hours for this shift are 5:30 am - 2:00 pm. is also eligible for a variable incentive program. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Fuel and Motion Control Systems Division of Eaton's Aerospace Group, has an opening for an Assembler II based in Irvine, CA. * Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames using hand tools and power tools * May disassemble and assemble product that is returned for repair * Utilize hand tools such as pliers, wrenches, screwdrivers, arbor press, vises, soldering iron, micrometers, calipers and indicators * Use routing sheets, operating instruction sheets or other documentation to ensure proper assembly of parts. Perform visual inspection of units during the assembly process and at completion of assembled units. * May perform verification as an operator/inspector for others in the department * Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements * Determine tooling and special gauging required to complete work * Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards. * Perform other related duties as assigned Qualifications: Required (Basic) Qualifications: * High School Diploma or GED from an accredited institution * Minimum of 2 year previous work experience in mechanical assembly * This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee). * No relocation provided. Candidates must reside within 50 miles of Irvine, CA in order to be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation. Preferred Qualifications: * Previous work experience in the Aerospace industry Position Criteria: * Communicate effectively and work well in a team environment * Ability to work from written instructions such as blueprints or other work instructions * Ability to solder, experience working in manufacturing * Ability to interact and participate in a team driven culture * Team player and able to multi-task * Assembly using required handheld and power tools #IND123 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER FMC division is currently seeking a Assembler II- 1st Shift. The hourly rate for this position is $22.50 per hour. The hours for this shift are 5:30 am - 2:00 pm. is also eligible for a variable incentive program. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Fuel and Motion Control Systems Division of Eaton's Aerospace Group, has an opening for an Assembler II based in Irvine, CA. * Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames using hand tools and power tools * May disassemble and assemble product that is returned for repair * Utilize hand tools such as pliers, wrenches, screwdrivers, arbor press, vises, soldering iron, micrometers, calipers and indicators * Use routing sheets, operating instruction sheets or other documentation to ensure proper assembly of parts. Perform visual inspection of units during the assembly process and at completion of assembled units. * May perform verification as an operator/inspector for others in the department * Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements * Determine tooling and special gauging required to complete work * Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards. * Perform other related duties as assigned Qualifications: Required (Basic) Qualifications: * High School Diploma or GED from an accredited institution * Minimum of 2 year previous work experience in mechanical assembly * This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All accepted applications must be U.S. Persons as defined by ITAR (U.S. citizen, U.S. Permanent Resident, Political Asylee, or Refugee). * No relocation provided. Candidates must reside within 50 miles of Irvine, CA in order to be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation. Preferred Qualifications: * Previous work experience in the Aerospace industry Position Criteria: * Communicate effectively and work well in a team environment * Ability to work from written instructions such as blueprints or other work instructions * Ability to solder, experience working in manufacturing * Ability to interact and participate in a team driven culture * Team player and able to multi-task * Assembly using required handheld and power tools #IND123 Skills: We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER ITD division is currently seeking a Assembler II-2nd Shift. The hourly rate for this position is $18.50 per hour. The hours for this shift are 7:00 am - 3:30 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** **PRIMARY FUNCTION:** Assembler role will assemble, fit, fasten, and install parts to form subassemblies. Align, fit, assemble, fasten, connect, and install system components of military mechanical/electromechanical equipment. **ESSENTIAL FUNCTIONS:** - Setup equipment to meet product standards for identification, shell painting, retainer loading, contact painting, wire cutting, riveting, contact crimping and contact hooding. - Weigh, mix and identify items such as inks, paints, adhesives, molding compounds, and potting materials. - Follow intermediate drawings and procedures. - Perform work with limited to no supervision. - Support cross training and support of other departments. - Manually load and/or machine load retainers into molded plastic inserts per work order instructions. - Bond loaded front inserts to molded plastic rear inserts per work order instructions. - Bond interface seals and grommet seals to plastic insert assemblies per work order instructions. - Rework and/or repair assembled parts and products according to engineering specification changes. - Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, and follows procedures. - Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. - Assemble and bond EMI rings to connector shell per work order instructions. - Assemble and bond EMI rings to connector shell per work order instructions. - Apply identification stamping to various components and assemblies. - Paint components, as well as apply paint stripe markings to contacts. - Work in a safe manner and perform housekeeping duties to maintain safe work environment. Assure proper maintenance of a safe and clean work area. - Stage materials for shipment as required. - Prepare single and shielded wires for termination, crimp contacts to prepared wires, terminate simple cables to connectors, and load and operate heat treat and annealing ovens. - Soldering contacts and application of solvents and epoxies. - Other duties as assigned. **Qualifications:** **BASIC QUALIFICATIONS:** - High School diploma or GED from an accredited institution - Minimum of 1-3 years with Manufacturing Environment experience - Must be able to work in the United States without corporate sponsorship now and within the future. - This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. **PREFERRED QUALIFICATIONS:** - Detailed knowledge of Aerospace product, manufacturing processes and inspection techniques. - Experience in aerospace products and applications. - Excellent communication and presentation skills - both verbal and written - Ability to read, follow and understand verbal instruction, product/ process specifications, drawings, and work orders in English. - 2-3 years' experience in related mechanical manufacturing assembly operations - Ability to use calculators. - Ability to lift 30 lbs. and handle components and assemblies using bending, reaching, and twisting body movements; in addition to use of hand tools. - Ability to recognize and inform supervision of assembly problems and equipment breakdown. - Good manual dexterity to assemble small and intricate parts. - Soldering experience **Additional Information:** - Strong ethics, values and the ability to influence others' decision-making. - Must exhibit a high level of motivation, sense of urgency, and energetic approach to job duties and requirements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (********************************************* for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER ITD division is currently seeking a Assembler II-2nd Shift. The hourly rate for this position is $18.50 per hour. The hours for this shift are 7:00 am - 3:30 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: PRIMARY FUNCTION: Assembler role will assemble, fit, fasten, and install parts to form subassemblies. Align, fit, assemble, fasten, connect, and install system components of military mechanical/electromechanical equipment. ESSENTIAL FUNCTIONS: * Setup equipment to meet product standards for identification, shell painting, retainer loading, contact painting, wire cutting, riveting, contact crimping and contact hooding. * Weigh, mix and identify items such as inks, paints, adhesives, molding compounds, and potting materials. * Follow intermediate drawings and procedures. * Perform work with limited to no supervision. * Support cross training and support of other departments. * Manually load and/or machine load retainers into molded plastic inserts per work order instructions. * Bond loaded front inserts to molded plastic rear inserts per work order instructions. * Bond interface seals and grommet seals to plastic insert assemblies per work order instructions. * Rework and/or repair assembled parts and products according to engineering specification changes. * Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, and follows procedures. * Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. * Assemble and bond EMI rings to connector shell per work order instructions. * Assemble and bond EMI rings to connector shell per work order instructions. * Apply identification stamping to various components and assemblies. * Paint components, as well as apply paint stripe markings to contacts. * Work in a safe manner and perform housekeeping duties to maintain safe work environment. Assure proper maintenance of a safe and clean work area. * Stage materials for shipment as required. * Prepare single and shielded wires for termination, crimp contacts to prepared wires, terminate simple cables to connectors, and load and operate heat treat and annealing ovens. * Soldering contacts and application of solvents and epoxies. * Other duties as assigned. Qualifications: BASIC QUALIFICATIONS: * High School diploma or GED from an accredited institution * Minimum of 1-3 years with Manufacturing Environment experience * Must be able to work in the United States without corporate sponsorship now and within the future. * This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. PREFERRED QUALIFICATIONS: * Detailed knowledge of Aerospace product, manufacturing processes and inspection techniques. * Experience in aerospace products and applications. * Excellent communication and presentation skills - both verbal and written * Ability to read, follow and understand verbal instruction, product/ process specifications, drawings, and work orders in English. * 2-3 years' experience in related mechanical manufacturing assembly operations * Ability to use calculators. * Ability to lift 30 lbs. and handle components and assemblies using bending, reaching, and twisting body movements; in addition to use of hand tools. * Ability to recognize and inform supervision of assembly problems and equipment breakdown. * Good manual dexterity to assemble small and intricate parts. * Soldering experience Additional Information: * Strong ethics, values and the ability to influence others' decision-making. * Must exhibit a high level of motivation, sense of urgency, and energetic approach to job duties and requirements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER MSD division is currently seeking a Space Composite Assembler I. The hours for this role are 6:00am-3:30pm is $23.00 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Eaton Aerospace and Mission Systems Division is seeking Production and Fabrication Technician for our Westminster, MD Facility. Their work directly supports the building and creation of hardware that enables: * Safety of our Warfighters * Firefighters and First responders to save lives * Aircraft to land * Rockets to launch * Satellites to Orbit the earth * Astronauts to perform research At Eaton Westminster, we are a leader in design, manufacturing, and testing of high precision aerospace components including filament wound pressure vessels and structures. Essential Duties and Responsibilities include the following: * Assembly of aspirators * Boro scoping * Pre/post proofing * Stenciling of space product * Clean room certification All Production Workers at Eaton Westminster are also responsible for: * Ensuring that Environmental, Health, and Safety are included as part of everyday activities. * Complying with all work and process instructions. * Participating in 5S cell efforts and continuous improvement. * Identifying improvement opportunities. * Lifting up to and including 50 pounds. * Utilizing proper Personal Protective Equipment (PPE) for each task associated with the job. * Working safely and reporting all near misses, illnesses, and injuries following established procedures. * Completing and maintaining their training to meet the required level of certified elements in their position. * Properly managing the traceability of components to ensure accuracy. Qualifications: Qualifications and Experience Required: * Minimum of 1 year of manufacturing experience OR 1 year of military experience * US Citizen or Permanent Resident Preferred: * HS Diploma or Associates Degree in Mechanical/Electrical Technology * Assembly or Test experience in a manufacturing environment preferred * Understanding of Lean, Six Sigma, Cellular Manufacturing, One Piece Flow, and Continuous Improvement concepts * Experience with various types of industrial machinery equipment and tools such as lathe's, curing ovens, thermal and/or life cycling machines, sanding and industrial painting tools, as well as standard hand tools are a plus. #IND123 #IND456 #LI-KM1 #LI-RR2 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER ITD division is currently seeking a Assembler II. The hourly rate for this position is $22.00 per hour. The hours for this shift are 7:00 am - 3:30 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** **PRIMARY FUNCTION:** Assembler role will assemble, fit, fasten, and install parts to form subassemblies. Align, fit, assemble, fasten, connect, and install system components of military mechanical/electromechanical equipment. **ESSENTIAL FUNCTIONS:** - Setup equipment to meet product standards for identification, shell painting, retainer loading, contact painting, wire cutting, riveting, contact crimping and contact hooding. - Weigh, mix and identify items such as inks, paints, adhesives, molding compounds, and potting materials. - Follow intermediate drawings and procedures. - Perform work with limited to no supervision. - Support cross training and support of other departments. - Manually load and/or machine load retainers into molded plastic inserts per work order instructions. - Bond loaded front inserts to molded plastic rear inserts per work order instructions. - Bond interface seals and grommet seals to plastic insert assemblies per work order instructions. - Rework and/or repair assembled parts and products according to engineering specification changes. - Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, and follows procedures. - Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. - Assemble and bond EMI rings to connector shell per work order instructions. - Assemble and bond EMI rings to connector shell per work order instructions. - Apply identification stamping to various components and assemblies. - Paint components, as well as apply paint stripe markings to contacts. - Work in a safe manner and perform housekeeping duties to maintain safe work environment. Assure proper maintenance of a safe and clean work area. - Stage materials for shipment as required. - Prepare single and shielded wires for termination, crimp contacts to prepared wires, terminate simple cables to connectors, and load and operate heat treat and annealing ovens. - Soldering contacts and application of solvents and epoxies. - Other duties as assigned. **Qualifications:** **BASIC QUALIFICATIONS:** - High School diploma or GED from an accredited institution - Minimum of 1-3 years with Manufacturing Environment experience - Must be able to work in the United States without corporate sponsorship now and within the future. - This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. **PREFERRED QUALIFICATIONS:** - Detailed knowledge of Aerospace products, manufacturing processes and inspection techniques. - Experience in aerospace products and applications. - Excellent communication and presentation skills - both verbal and written - Ability to read, follow and understand verbal instruction, product/ process specifications, drawings, and work orders in English. - 2-3 years' experience in related mechanical manufacturing assembly operations - Ability to use calculators. - Ability to lift 30 lbs. and handle components and assemblies using bending, reaching, and twisting body movements; in addition to use of hand tools. - Ability to recognize and inform supervision of assembly problems and equipment breakdown. - Good manual dexterity to assemble small and intricate parts. - Soldering experience **ADDITIONAL INFORMATION:** - Strong ethics, values and the ability to influence others' decision-making. - Must exhibit a high level of motivation, sense of urgency, and energetic approach to job duties and requirements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (********************************************* for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's IS AER ITD division is currently seeking a Assembler II. The hourly rate for this position is $22.00 per hour. The hours for this shift are 7:00 am - 3:30 pm. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: PRIMARY FUNCTION: Assembler role will assemble, fit, fasten, and install parts to form subassemblies. Align, fit, assemble, fasten, connect, and install system components of military mechanical/electromechanical equipment. ESSENTIAL FUNCTIONS: * Setup equipment to meet product standards for identification, shell painting, retainer loading, contact painting, wire cutting, riveting, contact crimping and contact hooding. * Weigh, mix and identify items such as inks, paints, adhesives, molding compounds, and potting materials. * Follow intermediate drawings and procedures. * Perform work with limited to no supervision. * Support cross training and support of other departments. * Manually load and/or machine load retainers into molded plastic inserts per work order instructions. * Bond loaded front inserts to molded plastic rear inserts per work order instructions. * Bond interface seals and grommet seals to plastic insert assemblies per work order instructions. * Rework and/or repair assembled parts and products according to engineering specification changes. * Read and interpret blueprints, illustrations, and specifications to determine layouts, sequences of operations, and follows procedures. * Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points. * Assemble and bond EMI rings to connector shell per work order instructions. * Assemble and bond EMI rings to connector shell per work order instructions. * Apply identification stamping to various components and assemblies. * Paint components, as well as apply paint stripe markings to contacts. * Work in a safe manner and perform housekeeping duties to maintain safe work environment. Assure proper maintenance of a safe and clean work area. * Stage materials for shipment as required. * Prepare single and shielded wires for termination, crimp contacts to prepared wires, terminate simple cables to connectors, and load and operate heat treat and annealing ovens. * Soldering contacts and application of solvents and epoxies. * Other duties as assigned. Qualifications: BASIC QUALIFICATIONS: * High School diploma or GED from an accredited institution * Minimum of 1-3 years with Manufacturing Environment experience * Must be able to work in the United States without corporate sponsorship now and within the future. * This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. PREFERRED QUALIFICATIONS: * Detailed knowledge of Aerospace products, manufacturing processes and inspection techniques. * Experience in aerospace products and applications. * Excellent communication and presentation skills - both verbal and written * Ability to read, follow and understand verbal instruction, product/ process specifications, drawings, and work orders in English. * 2-3 years' experience in related mechanical manufacturing assembly operations * Ability to use calculators. * Ability to lift 30 lbs. and handle components and assemblies using bending, reaching, and twisting body movements; in addition to use of hand tools. * Ability to recognize and inform supervision of assembly problems and equipment breakdown. * Good manual dexterity to assemble small and intricate parts. * Soldering experience ADDITIONAL INFORMATION: * Strong ethics, values and the ability to influence others' decision-making. * Must exhibit a high level of motivation, sense of urgency, and energetic approach to job duties and requirements. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES AMER ARS PDCAD division is currently seeking a Assembler (Avery Creek) - 2nd Shift. Shift Hours: Monday - Thursday 5am - 3:30pm. This position is eligible for overtime, which can be mandated at times. is $19.50 per hour. The core hours are 4pm - 2:30am. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The primary function of the Assembler, is to perform winding, assembly, complex and repetitive wiring, and to produce complete sub-assemblies, and final assembly of control equipment. Checks electrical / mechanical performance of completed assemblies. This department requires physical movement throughout the facility as it relates to mechanical assembly, and obtaining materials through kneeling, bending, squatting, and moving up and down ladders throughout the plant. In this function you will: * Works from drawings, engineering specifications, and manufacturing information to complete assembly and wiring of control equipment. * Determines necessary parts and material and prepares requisition to obtain parts and material from stock. * Prepares wire for assembly by cutting, stripping, and attaching terminals. * Route out, assembles, wires, adjusts, fits and modifies parts, components, and sub-assemblies to form completed control assembly. * May require lifting, bending, ladder work and other forms of movement. * Checks electrical / mechanical performance of completed assemblies to ensure conformance to Asheville Plant quality standards and makes necessary adjustments and alignment when required. * Executes engineering and customer changes and makes repairs as required. * Reports irregularities or equipment malfunctions to coach. * Maintains records as required. * Observes all safety and hygiene rules and regulations. * Maintains work area in a neat and orderly manner. * Other assignments as required. * Operator of power tools, including battery powered and compressed air Qualifications: Required Qualifications: * Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. * Must reside within a 50 - mile radius of Avery Creek, NC. Active - Duty military are exempt from the geographical requirement Preferred Qualifications: * Mechanical/Electrical background Position Criteria: * Able to lift 35 pounds - waist, shoulder, overhead; with or without accommodations * Ability to bend, kneel, stoop, and squat, as it relates to moving materials, as well as moving up and down ladders frequently in relation to material handling, with or without accommodations * Able to read blueprints and wiring diagrams * Proven history of safe work habits * Must be able to work effectively without direct supervision * Computer skills - Microsoft Office, Internet, etc. * Must be able to work overtime - weekdays and weekends We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES AMER ESS division is currently seeking a Assembler I- 2nd Shift. At our Youngsville, NC location they engineer, manufacturer, and ship prodcuts related to electrical power distribution to 6 different segments. Some of those include Utilties, Institutions, Aerospace, and Residential. The Assembler I- 2nd Shift role offers a 40-hour paid work week with hours being 2:30pm-11:00pm Monday-Friday. WIth full time employment you are offered Benefits (Medical, Dental, & Vision), 401K percent match plan, and vacation. The hourly rate for this position is $18.50 per hour. The core hours are 2:30pm - 11:00pm. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Assembler I will build sub-assemblies and assemblies involving complex and repetitive wiring for Uninterruptible Power Systems (UPS). In this function you will: * You will follow Standard Operating Procedures (SOPs) to * Build sub-assemblies and assemblies using standard operating procedures. * You will be responsible for visual inspections of material before and after assembly. * You will use various fixtures, gauges, hand tools and power tools to assemble, adjust, or repair product. * You will inspect completed assemblies to ensure compliance with Raleigh Plant Quality standards and make necessary adjustments when required in order to meet quality goals. * You will adhere to environmental, health, safety rules and regulations. * You will provide process and safety improvement ideas. * You will ensure machines and tools are properly calibrated and perform housekeeping duties as necessary using the principles of 5S+. Qualifications: Required (Basic) Qualifications: * High School Diploma or GED required from an accredited educational institution * Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. * Relocation assistance is not available for this position. Only candidates in the immediate geographical area (50-mile radius) will be considered. Active - Duty Military Service member candidates are exempt from the geographical area limitation. Preferred Qualifications: * Previous experience with standard operating procedures * Previous experience with product electrical assembly, maintenance and/or repair * Previous Soldering experience Position Criteria: * Basic working knowledge and experience with computers * Ability to demonstrate working knowledge of the mechanical, electrical, and safety procedures of a manufacturing facility. * Ability to read and interpret standard operating procedures. * Ability to work daily and/or weekend overtime, willingness to flex to different areas or local plants as needed * Ability to lift 50 lbs. * Ability to distinguish colored wiring * Ability to stand for extended periods of time. Repetitive lifting, bending, and squatting is inherent to this position. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES AMER ARS division is currently seeking a Entry Level Assembler (2nd). The hourly rate for this position is $19.80 + $1.00 Shift Differential per hour. This position is also eligible for a variable incentive program. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. HOURS: 3:30PM - Midnight Why work at Eaton? Below are a few of the outstanding benefits we offer: * Health benefits offered on first day of your employment! * Vacation available after 60 days of employment * 13 Paid holidays * Weekly pay * Career progression opportunities to cross-train in different departments and increase compensation. * Overtime opportunities * Retirement benefits * Educational Assistance Program, Wellness Reimbursement, and more! What you'll do: * Set up, assembly, and repairing when necessary * Perform quality and SPC checks where necessary to produce good quality devices * Share in handling all materials used in the cell and the movement of finished devices to designated areas * Adhere to and support all facility environmental guidelines and procedures to identify additional pollution prevention projects to reduce waste and raw material consumption. Position Criteria: * Must stand up to 8 hours a day * Requires hand speed and mental agility * Strong Work Ethic * Attention to detail (accuracy) * Consistent overtime * Proficient using hand/power tools Qualifications: Basic Qualifications: * Must have a high school diploma/GED from and accredited association * No relocation benefit is offered for this position. Only candidates residing within the immediate Lincoln, IL area (70 miles) will be considered for this position. Active-Duty Military Service member candidates are exempt from the geographical area limitation. * Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. Preferred Qualifications: * Previous manufacturing or assembly experience Skills: We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

(5:00 am to 1:30 pm) * Perform mechanical assembly, cleaning, bead blasting, deburring, and final inspection on glass-to-metal seal and cover manufacturing lines. * Load and unload parts from furnaces and ovens. * Use microscopes to build and inspect parts. * Use calipers and mechanical instruments to take measurements. * Understand and follow assembly drawings, written, and verbal work instructions. * Do basic math and apply it to specifications. * Work with supervisors and engineers to ensure flow of production and report issues that affect the product quality and equipment performance. Minimum Requirements: * Ability to use small hand-tools such as tweezers and microscope * Basic computer skills for documenting defects and time charging * This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a "US Person" under US export laws (or eligible for approval under a U.S. Government export license) Preferred Requirements: * High school diploma or GED * Experience working in a manufacturing environment * Must have good written and verbal communication skills * Must be able to work independently and be self-motivated * Must be able to work in a team environment and participate in problem solving when process and quality issues come up Hourly Range: $19.23 - $24.03. Applicable pay within the posted range may vary based on factors including, but not limited to, geographical location, job function of the position, education, and experience of the successful candidate. BENEFITS OF WORKING FOR HONEYWELL In addition to a performance-driven salary, cutting-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and Paid Holidays. The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. Job Posting Date: January 5, 2026. U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical demands around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company dedicated to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. THE BUSINESS UNIT Honeywell Aerospace Technologies (AT) products and services are found on virtually every commercial, defense, and space aircraft in the world. We build aircraft engines, cockpit and cabin electronics, wireless connectivity systems, mechanical components, and more, and connect many of them via our high-speed Wi-Fi offerings. Our solutions create healthier air travel, more fuel-efficient and better-maintained aircraft, more direct and on-time flight arrivals, safer skies and airports, and more comfortable flights, along with several innovations and services that reflect exciting and emerging new transportation methods such as autonomous and supersonic flights. Revenues in 2023 for Honeywell Aerospace Technology were $14B and there are approximately 21,000 employees globally.

TempToFT Assembler Rate: $16/hr Hours: 6am-2:30pm (some overtime until 4:30pm) Wilmington, OH C-D Responsibilities: - Assembly of various products and components to finished goods. - Perform any required setup activity. - Position and align components for assembly. - Assemble fabricated/purchased parts into subassemblies and complete products according to a bill of materials. - Operate air tools and basic hand tools to assist in assembly operations. Additional tool operation may be required as necessary. - Maintain safe and clean working environment by complying with procedures, rules, and regulations. - Perform essential job duties as directed by supervisor. - Other duties may be assigned as necessary. Requirements: - High school diploma or general education degree (GED) is preferred and/or training; or equivalent combination of education and experience. - Must be willing and able to meet quality and production standards set by department. - Must be willing and available to work overtime and Saturdays as scheduled. - Must be willing and available to learn new processes as necessary. - Must be willing and able to work in a team centered work environment. - Comprehend simple instructions, either written or verbal. - Effectively communicate and perform required documentation. - Perform addition, subtraction, multiplication, and division using whole numbers, common fractions, and decimals. - Read basic tape measure and basic blueprints. - Apply common sense understanding to carry out detailed but uninvolved written or oral work instructions. - Deal with problems involving a few concrete variables in various manufacturing situations. If you possess the skills we are looking for and ready to make a positive impact, apply NOW! We look forward to connecting soon!

About QTS QTS offers critical end-of-line services for medical device OEMs including finished device assembly, packaging and sterilization management. QTS was founded in 2001 and is part of the Cretex Medical family of companies. * Purpose: To have a positive impact on people. * Mission: Make it easier to get products to patients. * Values: Integrity, Collaboration, Communication, & Leadership Learn more at ******************** and ********************** Responsibilities Assembler II Position Summary Responsible for any assembly and packaging of components into products for the medical industry. They will also perform cleaning and passivation and label generation and inspection, along with assembly and packaging of components into products for the medical industry. This position will be based out of our facility located in west Bloomington, Minnesota (55438). Assembler II Duties and Responsibilities * Inspect, assemble, and package medical devices and components * Use tray, band, and impulse sealers * Perform various types of testing on device packaging * Responsible for proper documentation necessary to complete job * Perform material transactions in ERP system * Work with chemicals (Isopropyl Alcohol, solvents, detergents, etc.) as needed to clean work area and components * Assist in weekly cleaning of production areas and common spaces * Ensure products are handled and assembled per QTS Quality Systems Procedures * Move materials to and from the production areas including verification of Part/Lot/Quantity * Adhere to cGMP and ISO regulations * Maintain awareness of workplace safety and relevant training * Handle chemicals and equipment per QTS procedures * Generate and inspect labels per the Standard Operating Procedures (SOPs) for label generation * Participate in the Operational Excellence Program * Other duties as assigned Qualifications Assembler II Requirements/Qualifications * High school diploma or equivalent * English language (reading comprehension, listening, and writing) * Attention to detail * Good hand-eye coordination * Able to work in a cleanroom environment, including working with chemicals as needed to clean work areas and components (Isopropyl Alcohol, solvents, detergents, etc.) * Proficient in math skills required to complete all manufacturing procedures * Knowledge of Lean Manufacturing Methodologies * Basic computer skills and Microsoft Office proficiency (Outlook, Word, Excel, Teams) * Clear and effective verbal and written communication skills * Organizational skills * Ability to work in a fast-paced team environment * Able to sit and stand for long periods of time * At least 6 months of the following experience: * Assembly, manufacturing, and cleanroom experience * Operation of tray, band, and impulse sealers * Knowledge or training pertaining to FDA, cGMP, and ISO regulations * Knowledge or training pertaining to workplace safety and OSHA regulations * Able to accurately measure chemicals/solvents and adjust concentrations as needed * Storing, handling, and cleaning up hazardous materials * Grand Avenue Software (GAS) Assembler II Preferred Knowledge, Skills and Abilities * Able to work overtime as needed (staying later during the week days or at least one weekend day) * Cleaning & Passivation Experience * Cleanroom practices, including gowning * At least 6 months of labeling systems experience What Is It Like to Work for QTS? At QTS, we are passionate about quality as the services we provide have a direct impact on the quality of life for others and we pride ourselves on our culture and work environment. The tenure of our staff ranges from recently hired to 20+ years! Check out some of things that employees have said about working at QTS: * "We are a family." * "After so many toxic work environments, coming to QTS was like finding a harbor in a storm! Coming here was one of the best professional decisions I've ever made!" * "I would describe my coworkers as kind and friendly." * "Three words that I would use to describe QTS's culture are: Respectful, Fast-paced, and Fun!" We encourage you to explore the many opportunities that Quality Tech Services could offer you as an employee and as a valued team member. Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* Pay Range USD $19.00 - USD $22.00 /Hr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Temp Manpower has partnered with Viking in Hastings, MI and we have immediate openings for several positions to start as soon as next week! Jobs Available: Assembly Inspection Counting & Packing Shift: ALL SHIFTS AVAILABLE! Our Position Offers: Pay starts at $16/hr Increases to $17/hr once hired after 90-days + shift premiums Very clean working environment. Premium benefits once hired in (Medical, dental, and 401k) This position has opportunity to get hired in immediately. Opportunity to gain new skills. Qualifications: Reliable High school diploma or GED Ability to satisfy criminal background check and drug screen No experience is ok!

**Assembler** **We offer:** + Competitive pay starting of $23.63/hour and $24.63/hour, plus $1.50 shift differential for 2nd and 3rd shift openings. + Medical, vision, dental, and life insurance starting on your first day. + 401k with generous company match + Up to three weeks paid vacation in your first year. + Twelve (12) company holidays + Employee assistance program and medical support + Opportunities for advancement **The Impact You'll Make in this Role** As an Assembler, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: + Work efficiently, effectively, and collaborate in a team setting while following operating procedures and/or customer specifications to produce quality products which are delivered to the customer on time + Work at various machines or stations assembling product, operating machinery, picking & packing finished goods, and/or inspecting products; dependent upon openings + Use hand and power tools and may be required to operate powered industrial vehicles + Use computers as needed to run process operations, input data, update inventory, etc. + Demonstrate safe work behaviors to avoid injury to self or others and contribute to continuous improvement and problem solving **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + Possess a High School Diploma/GED or higher (completed and verified prior to start) + Ability to work overtime, weekends and holidays as needed. + Ability to work a fixed first, second, or third shift of 8 to 10 hours; depending on availability + **_Red Wing, MN 55066 - Reliably commute or planning to relocate before starting work (required)_** **_Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process_** Additional qualifications that could help you succeed even further in this role include: + Minimum of one (1) year of manufacturing experience in a fast-paced environment + Basic computer knowledge + Effective communication skills along with the ability to read, speak and understand both oral and written instructions + Problem solving and troubleshooting skills + Ability to collaborate and work within a team setting **Pay** Competitive pay starting at $24.34/hour and $25.37/hour, plus $1.50 shift differential for 2nd and 3rd shift openings. This targeted starting salary represents a good faith estimate and can vary based on factors including, but not limited to, job-related knowledge, skills, and experience. Other benefits and incentives may apply; pay and benefits overview:**************************************************************** This information is being disclosed in accordance with local Pay Transparency Rules. **Work location:** + Red Wing, MN **Travel:** Does not include travel **Relocation Assistance:** Is not Authorized **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. \#INDPROD All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en\_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Assembler We offer: Competitive pay starting of $23.63/hour and $24.63/hour, plus $1.50 shift differential for 2nd and 3rd shift openings. Medical, vision, dental, and life insurance starting on your first day. 401k with generous company match Up to three weeks paid vacation in your first year. Twelve (12) company holidays Employee assistance program and medical support Opportunities for advancement The Impact You'll Make in this Role As an Assembler, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: Work efficiently, effectively, and collaborate in a team setting while following operating procedures and/or customer specifications to produce quality products which are delivered to the customer on time Work at various machines or stations assembling product, operating machinery, picking & packing finished goods, and/or inspecting products; dependent upon openings Use hand and power tools and may be required to operate powered industrial vehicles Use computers as needed to run process operations, input data, update inventory, etc. Demonstrate safe work behaviors to avoid injury to self or others and contribute to continuous improvement and problem solving Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Possess a High School Diploma/GED or higher (completed and verified prior to start) Ability to work overtime, weekends and holidays as needed. Ability to work a fixed first, second, or third shift of 8 to 10 hours; depending on availability Red Wing, MN 55066 - Reliably commute or planning to relocate before starting work (required) Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as a part of the selection process Additional qualifications that could help you succeed even further in this role include: Minimum of one (1) year of manufacturing experience in a fast-paced environment Basic computer knowledge Effective communication skills along with the ability to read, speak and understand both oral and written instructions Problem solving and troubleshooting skills Ability to collaborate and work within a team setting Pay Competitive pay starting at $24.34/hour and $25.37/hour, plus $1.50 shift differential for 2nd and 3rd shift openings. This targeted starting salary represents a good faith estimate and can vary based on factors including, but not limited to, job-related knowledge, skills, and experience. Other benefits and incentives may apply; pay and benefits overview:*************************************************************** This information is being disclosed in accordance with local Pay Transparency Rules. Work location: Red Wing, MN Travel: Does not include travel Relocation Assistance: Is not Authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. #INDPROD All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Assembly Team Member I 505 6:00am - 4:30pm Monday - Thursday Company Profile 80 years and countless innovations later, JCB is the world's largest privately-owned manufacturer of construction and agricultural equipment. At 22 plants spanning four continents-and countries including the United States, the United Kingdom, India and Brazil-JCB manufactures a range of more than 300 products including Loadall telescopic handlers, backhoe loaders, excavators, wheel loaders, compact excavators, skid steer loaders, compact track loaders, Access aerial work platforms, rough terrain forklifts, and Fastrac tractors. JCB people are at the heart of our business and as a family-owned business we answer to our customers, not a group of shareholders. That freedom allows us to concentrate on developing the latest technologies and incorporating them into our equipment. We focus on what our customer needs on the jobsite - a machine that holds up in the toughest environment and increases their productivity. At JCB, we stand behind our products - and our name. Major Tasks, Responsibilities & Key Accountabilities Ensure compliance to company health and safety procedures. Perform labor operations such as assembling and sub-assembling parts, components and equipment utilizing hand tools and power tools. Ability to operate overhead cranes, manipulators, and assembly equipment. Learn standardized processes for all assembly operations Apply Problem Solving Tools and Techniques to assist Assembly in elimination of defects. Advise/Recommend processes and procedures to improve safety and quality. Other duties or tasks as assigned by the Manager Minimum Qualifications Must pass any drug screens, background checks and any pre-employment tests as applicable. High school diploma or GED Preferred - Two years of manufacturing experience or pass mechanical assessment Knowledge, Skills, Abilities & Competencies Effective communication and problem-solving skills Detail oriented and self-directed Multi-task while maintaining a sense of urgency Flexibility with work schedule and duties including overtime Ability to operate a forklift, pneumatic or various hand tools and/or heavy equipment or the demonstrated ability to learn Ability to operate cranes, manipulators, and assembly equipment Must wear Personal Protective Equipment as required Conversant with Engineering Drawings Ability to lift 35 lbs. repetitively Ability to use repetitive motions Ability to stand, stoop, bend, and climb Job Conditions Both office environment and occasionally manufacturing/factory environment Subject to noise and temperature changes Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: Sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand and walk. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus. JCB is an equal employment opportunities (EEO) employer in accordance with applicable federal, state and local laws. JCB complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. EEO EMPLOYER/VET/DISABLED. JCB Inc. is not currently hiring individuals for this position who now or in the future require sponsorship for employment visa status; however, as a global company, JCB offers many job opportunities outside of the U.S. which can be found through our website at **************************************** Disclaimer: This job description is general in nature and is not designed to contain or to be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to the job.

Working with blue prints, assembly drawings, specifications, sketches, and verbal and written instructions, assembles, disassembles, repairs and adjusts a variety of units, attachments, components and/or accessories. Reports directly to Production Supervisor or his/her designate. Key Results Areas by level of work Level I: Quality - Complete and accurate work performed efficiently Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed * Working on assembly operations, sub assembly operations, attachments and/or accessories. * Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories. * Uses an assortment of measuring tools * Consistently meets customer's quality requirements and expectations. Follow instructions - oral and/or written * Can properly read all blueprint and work instructions * Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification. * Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate. Safety & housekeeping * Work may require use of scaffold, ladders, forklift, and/or scissor lift. * Work may require the use of a crane to move part. * Maintains a clean work area with no clutter. * Practices safety at all times while at work. * Follows safety policies and procedures and speaks up when others are non-compliant. * Wears all safety equipment for area of work. Continual Improvement suggestions * Keeps an open mind to others continuous improvement suggestions * Bring continuous improvement suggestions to the appropriate team member. Professional Development * Demonstrates initiative, positive attitude, and enthusiasm for the job * Will follow up with supervisor on professional development goals and opportunities * Takes an interest and lets it be known that they have a desire to grow with the company Requirements Qualifications: To qualify for this position, an individual must possess the knowledge, training, experience and abilities required. Education and Training Technical Trades School in Welding High school GED Required Experience: 1+ years of Assembly experience. Other: Must be willing to work overtime as required. Minimal travel may be required Skills: To perform the job successfully, an individual should demonstrate the following competencies: * Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the client's property or job site. * Strong organization and time management skills. * High attention to detail. * Demonstrate behavior consistent with company values. * Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture. * Exhibits polite and professional communication via phone, e-mail and mail. * Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. * Maintain a collaborative relationship with internal and external stakeholders. * Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement. * Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention. * Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements. * Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals. * Ability to thrive in a team environment. Physical and Mental Demands The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors. * Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure. * Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration. Work Authorization Must be able to work in the U.S without sponsorship. Salary Description $21-$25