Quality Control Inspector jobs at Star Construction Management - 45 jobs

Atlas Bolt & Screw Company LLC As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Summary Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Interprets engineering drawings, schematic diagrams, or formulas and confers with management or engineering staff to determine quality and reliability standards. Selects products for tests at specified stages in production process, and tests products for variety of qualities such as dimensions, performance, mechanical, electrical, and/or chemical characteristics. Records test data (applying statistical quality control procedures when applicable) utilizing precise measuring instruments and large test equipment. Evaluates data and writes reports to validate or indicate deviations from existing standards. Recommends modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability. Sets up and performs destructive and nondestructive tests on materials, parts, or products to measure performance, life, or material characteristics. Prepares graphs or charts of data or enters data into computer for analysis. Authorizes parts to be shipped. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality; Troubleshoots cases of quality failure. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions ; Uses equipment and materials properly. Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan. Knowledge - Exuberates the ability and desire to learn new skills and techniques; including willingness to enroll in additional education classes, workshops, on-line webinars, etc. Communication - Coordinates quality issues between operators and management. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers, vendors and fellow employees. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills Ability to comprehend, manipulate, and create basic Microsoft office documents (Word, Excel, Outlook, Power Point, etc.). AutoCad experience a plus. Other Skills Organizational skills required; Mechanical ability to use tools (hand drill, rivet gun, band saw drill), Ability to understand how machines run to help in troubleshooting quality issues. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk and sit. The employee must frequently lift and/or move up to 10 pounds and occasionally lift up to 50 pounds. Specific vision abilities required by this job include close vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate and sometimes loud. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

**Discover a more connected career** At Ervin Cable Construction, LLC, as a Quality Control Field Technician, you'll ensure that construction or installation work meets specified standards by performing inspections, conducting tests, and monitoring compliance throughout projects. You'll address issues, document findings, and collaborate with teams to implement improvements and maintain high-quality outcomes **Connecting you to great benefits** + Weekly Paychecks + Paid Time Off, Parental Leave, and Holidays + Insurance (including medical, prescription drug, dental, vision, disability, life insurance) + 401(k) w/ Company Match + Stock Purchase Plan + Education Reimbursement + Legal Insurance + Discounts on gym memberships, pet insurance, and much more! **What you'll do** + Conduct quality inspections during the installation process to ensure work meets plans and specifications + Perform final inspections as requested by customers to ensure compliance with construction standards + Identify issues and report them to relevant team members for resolution + Record and follow up on non-compliance issues until they are resolved + Ensure all required testing is completed as specified and document the results + Follow installation milestones and support project activities as directed by management + Work overtime, travel, and handle on-call or after-hours responsibilities as needed, and perform duties in all weather conditions + Other duties as assigned **What you'll need** + To be 18 years of age or older + Authorization to work in the United States for this company + Valid State driver's license (cannot be Provisional), including an acceptable driving record + One year of relevant work experience Additional qualifications + Quality control experience preferred + Associates Degree in an industry related field or equivalent work experience + Knowledge and understanding of the telecommunication construction industry standard practices + Knowledge of Customer Installation Standards and Documentation **Physical abilities & exposures** + **Routinely** : work alone in remote locations, operate vehicle, squeeze, bend, stoop, stand, walking, climb stairs, use keyboard and mouse + **Occasionally** : work at heights, use ladder, life greater than 55 pounds **Why grow your career with us** Your career here is more than just a job - it's your pathway to opportunity. Our hands-on training, supportive environment, and responsive leadership connect you to work with purpose. Our commitment to you extends beyond professional development to a safety-first culture that ensures you can do what you do best, with peace of mind. **Building stronger solutions together** Our company is an equal-opportunity employer - we are committed to providing a work environment where everyone can thrive, grow, and feel connected. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Start a new career with us. Taylor Corporation is a growing, dynamic company with big plans for the future - and our people. Family owned and proud of it, we power our employees' potential and strive to create opportunity and security for every member of the team. We're passionate about our work, we believe there is always a better way, and we're in this for the long haul. Taylor is proud to now offer DailyPay. With DailyPay, you can get paid on your very first day. No more waiting for direct deposit or a paper check! ********************************************* Ready to build a career? It's time to look at Taylor. This location adheres to the Federal Information Security Management Act (FISMA). All employees must undergo a federal background check, which requires U.S. citizenship. Your Opportunity: Taylor Corporation is looking for a Quality Inspector to ensure finished products meet all customer, production, and quality standards before leaving the facility. Your Responsibilities: Use attention to detail to verify that final work products, including statements and letters, meet written instructions and production standards Identify and communicate deficiencies in work tickets and coordinate efforts to correct errors Examine materials by confirming required manufacturing or industry specifications using visual and measurement tests Reject and return unacceptable materials and document rework as needed Explain quality issues to operators and supervisors when products do not meet client instructions Move throughout the facility to verify job accuracy across multiple machines Cross-train in different departments, including postal, shipping, and hand table Report quality concerns or issues to senior management immediately Ensure all outgoing product is 100% accurate Input production and quality data into internal systems Learn and understand the full production process and the QA role within it Maintain a safe and healthy work environment by following standards, procedures, and regulations Inspect materials and products using fixed or preset measuring instruments Ensure materials and products meet established tolerance levels and are not damaged Your Shift: 2nd Shift - Monday - Friday, 2:00 PM - 10:00 PM EST You Must Have: Strong attention to detail Basic measuring skills, including the ability to read a ruler and other measuring devices Basic problem-solving skills Basic computer skills, including opening, saving, printing files, and entering data Ability to work extended hours and weekends based on production needs Strong English communication skills, both written and verbal Requirements Within This Position: Ability to communicate and exchange accurate information clearly Ability to remain in a stationary position for extended periods Regular operation of machinery and handling of print materials Frequent movement throughout the facility Ability to lift, push, pull, and carry 25+ pounds We Would Also Prefer: High school diploma or GED Prior experience in the print industry or a fast-paced, high-production environment About Taylor Corporation One of the largest print and communications firms in North America, Taylor's family of companies provides a diverse set of products, services and technologies that address the toughest business challenges. We work diligently each day to create printed and digital marketing communication solutions that help power many of the world's most recognizable brands. With more than 50 years of category expertise and 10,000 employees spanning dozens of U.S. states and multiple countries, Taylor serves businesses and distributors both large and small. Our employees enjoy a comprehensive benefit package including a choice of several health plans, dental, vision, wellness programs, life and disability coverage, flexible spending accounts, health savings accounts, a 401(k) plan with company match, paid time off (PTO) and 64 hours of annual holiday pay. The Employer retains the right to change or assign other duties to this position. Taylor Corporation is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Taylor Corporation including all partners and affiliates is an Equal Opportunity Employer/Veterans/Disabled.

**QA Tech, Predictions** **Allied Mineral Products** is a leading manufacturer of monolithic refractories worldwide. We are seeking a **QA Tech.** in our Columbus, Ohio plant. The QA Tech, under the direction of the Quality Assurance Supervisor, confirm that the quality of incoming raw materials and finished products is maintained at acceptable levels. Also, it must ensure all Quality and Production related Standard Operating Procedures (SOP's) are followed. **Duties and Responsibilities** + Complete all laboratory work requests assigned. Also participate in performing all pertinent tests for COA's. + Maintain an orderly file on work performed. This file is to contain all pertinent information regarding all work undertaken. + Observe and conduct practical evaluation tests as required. These tests include density test, flow tests, exotherms, screen analyses, moisture contents, bond detection, casting set times, workability tests, magnetic testing, etc. + Complete work assigned in evaluating raw material samples received. + Assist in the evaluation of all technical problems as requested. This could involve helping the Quality Assurance Department examine suspect raw material or finished product. This work is to be done at the direction of the Quality Supervisor, or Manager of Quality. + When requested, write reports on work completed and observations made. + Assist in the calculating, recording, and maintaining of up-to-date files on all tests and screen analyses performed. + Under the supervision of the Quality Assurance Supervisor, predict formula changes necessary by computations of variations in raw materials, and prepare batch sheets reflecting such changes prior to issuing to batching crews. + Prior to issuing to batching crews, be sure that the use of available re-blend is included on all batch sheets. Also make certain re-blend is used and reported; to verify the accuracy of Re-blend Inventory. + Help check the batches by watching the Batch Crew for batching errors and by observing the batches while being placed into the mixer systems. Check all labeling and dating of raw materials to ensure they are correct. + Verify all finished products are labeled and packaged correctly. Complete all QA tests and place the data into the computer system. Collect storage samples and keep them in order. Make certain all finished products are approved with a sticker before being placed into inventory. + Assist in the training of any new QA Technician, Sales Trainee, or other employee, as needed. + Assist in maintaining an orderly plant layout, particularly in raw materials, and with emphasis on the use of partial pallets, shortest rows of materials, and test materials. Also maintain all QA offices and keep them neat, clean and orderly. + Attend meetings and serve on various committees when requested. + Assist in the development of new test methods and procedures and recommend revisions of existing test procedures and forms. + Be familiar with the job duties of the Quality Assurance Supervisor, assume necessary duties in their absence. This job description illustrates the types of duties performed in this job. It is not intended to be an exhaustive listing of each essential function of the job. Employees in this job may be required to perform other duties as assigned by supervisors although not specifically listed herein and those duties may be essential to the job. Because job content may change from time to time, the Company reserves the right to add and/or delete tasks from this job at any time. **Qualifications** + Must be physically and mentally fit for duty. + Must be at least 18 years old. + Dependable and able to maintain the attendance required to perform the job. + Must be able to compute basic math functions: Calculate % of additives needed, Calculate % moisture present in sample, etc. + Ability to read, write, comprehend and fully understand: SOPs, SDSs, labeling, safety and health regulations, and procedures within the job, this job group and the plant. + Ability to operate computerized equipment, read scales, recognize product problems, malfunctions and patterns out of specification. + Thorough knowledge of Microsoft Office is essential, particularly Excel graphing and charting. + Good human relation skills and a practical approach to problem solving are necessary. + Ability to maintain close attention to detail and accuracy. + Associate degree in Ceramic Engineering or another technical field. An alternative would be at least five years' experience in the ceramics industry. **Working Environment** + The job is in a dusty and dirty environment. + Working in a hot and/or cold environment. + Required to wear respirator, safety glasses, hearing protection, and safety shoes. **Physical Requirements** + Must be able to qualify for and wear a respirator. + Work requires sitting, standing, and/or walking for long periods of time. **Allied Mineral Products offers competitive wages, health, dental, STD, LTD, ESOP retirement plan and profit sharing. Passing a drug screen is required prior to starting work should an offer be made.** **Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.**

**Allied Mineral Products** is a leading manufacturer of monolithic refractories worldwide. We are seeking a **QA Tech, predictions** in our Columbus, Ohio location. the tech, under the direction of the Quality Supervisor and Quality Manager, predict formulas using current inventory to exceed customer's expectations while safely utilizing all applicable SOP's and following all company policies. **Duties and Responsibilities** + Effectively train and coach team members in all applicable SOP's and ensure that these SOP's are rigorously followed. + Mentor new employees. + Be a positive role model to all employees. + Predict all formulas using current lots of raw materials for manufacturing. + Print and verify correctness of all batch sheets for operations to use in production. + Apply re-blend, when possible, to all batches. + Work with batching to use up WIP, partial bulk bags, and Dead Stock raw materials. + Recommend measures to improve inspection and production methods, equipment performance, and quality of product. + Suggests changes in working conditions and use of equipment to increase efficiency of production. + Analyze and resolve work problems or assists workers in solving work problems. + Initiate or suggest plans to motivate workers to achieve work goals. + Maintain quality records (i.e. batch sheets and prediction and bulk batch print outs). + Work to eliminate all waste. + Help implement World Class Manufacturing and Quality initiatives. + Perform work of others as directed. This job description illustrates the types of duties performed in this job. It is not intended to be an exhaustive listing of each essential function of the job. Employees in this job may be required to perform other duties as assigned by supervisors although not specifically listed herein and those duties may be essential to the job. Because job content may change from time to time, the Company reserves the right to add and/or delete tasks from this job at any time. **Qualifications** + Must be physically and mentally fit for duty. + Must be at least 18 years old. + Dependable and able to maintain the attendance required to perform the job. + Must have work and educational experience to satisfy job competencies. Able to participate in external training. + Must be able to compute basic math functions: Calculate % of additives needed, Calculate % moisture present in sample, add, subtract, multiply and divide. Mut be able to operate using units of American money and weight measurement, volume, and distance. Must be familiar with metric units as well. + Ability to read, write, comprehend, and fully understand: SOPs, SDSs, labeling, safety and health regulations, and procedures within the job, this job group and the plant. + Ability to operate computerized equipment, read scales, recognize product problems, malfunctions, and patterns out of specification. + Thorough knowledge of Microsoft Office is essential, particularly Excel graphing and charting. + Good human relation skills and a practical approach to problem solving are necessary. + Ability to maintain close attention to detail and accuracy. **Working Environment** + The job is in a dusty and dirty environment. + Working in a hot and/or cold environment. + Shift varies from early morning start, evenings and weekends. + Required to wear respirator, safety glasses, hearing protection, and safety shoes. **Physical Requirements** + Work requires sitting, standing, and/or walking for long periods of time. + Must be able to qualify for and wear a respirator **Allied Mineral Products offers competitive wages, health, dental, STD, LTD, ESOP retirement plan and profit sharing. Passing a drug screen is required prior to starting work should an offer be made.** **Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.**

Allied Mineral Products is a leading manufacturer of monolithic refractories worldwide. We are seeking a QA Tech, predictions in our Columbus, Ohio location. the tech, under the direction of the Quality Supervisor and Quality Manager, predict formulas using current inventory to exceed customer's expectations while safely utilizing all applicable SOP's and following all company policies. Duties and Responsibilities Effectively train and coach team members in all applicable SOP's and ensure that these SOP's are rigorously followed. Mentor new employees. Be a positive role model to all employees. Predict all formulas using current lots of raw materials for manufacturing. Print and verify correctness of all batch sheets for operations to use in production. Apply re-blend, when possible, to all batches. Work with batching to use up WIP, partial bulk bags, and Dead Stock raw materials. Recommend measures to improve inspection and production methods, equipment performance, and quality of product. Suggests changes in working conditions and use of equipment to increase efficiency of production. Analyze and resolve work problems or assists workers in solving work problems. Initiate or suggest plans to motivate workers to achieve work goals. Maintain quality records (i.e. batch sheets and prediction and bulk batch print outs). Work to eliminate all waste. Help implement World Class Manufacturing and Quality initiatives. Perform work of others as directed. This job description illustrates the types of duties performed in this job. It is not intended to be an exhaustive listing of each essential function of the job. Employees in this job may be required to perform other duties as assigned by supervisors although not specifically listed herein and those duties may be essential to the job. Because job content may change from time to time, the Company reserves the right to add and/or delete tasks from this job at any time. Qualifications Must be physically and mentally fit for duty. Must be at least 18 years old. Dependable and able to maintain the attendance required to perform the job. Must have work and educational experience to satisfy job competencies. Able to participate in external training. Must be able to compute basic math functions: Calculate % of additives needed, Calculate % moisture present in sample, add, subtract, multiply and divide. Mut be able to operate using units of American money and weight measurement, volume, and distance. Must be familiar with metric units as well. Ability to read, write, comprehend, and fully understand: SOPs, SDSs, labeling, safety and health regulations, and procedures within the job, this job group and the plant. Ability to operate computerized equipment, read scales, recognize product problems, malfunctions, and patterns out of specification. Thorough knowledge of Microsoft Office is essential, particularly Excel graphing and charting. Good human relation skills and a practical approach to problem solving are necessary. Ability to maintain close attention to detail and accuracy. Working Environment The job is in a dusty and dirty environment. Working in a hot and/or cold environment. Shift varies from early morning start, evenings and weekends. Required to wear respirator, safety glasses, hearing protection, and safety shoes. Physical Requirements Work requires sitting, standing, and/or walking for long periods of time. Must be able to qualify for and wear a respirator Allied Mineral Products offers competitive wages, health, dental, STD, LTD, ESOP retirement plan and profit sharing. Passing a drug screen is required prior to starting work should an offer be made. Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.

Allied Mineral Products is a leading manufacturer of monolithic refractories worldwide. We are seeking a QA Tech, predictions in our Columbus, Ohio location. the tech, under the direction of the Quality Supervisor and Quality Manager, predict formulas using current inventory to exceed customer's expectations while safely utilizing all applicable SOP's and following all company policies. Duties and Responsibilities * Effectively train and coach team members in all applicable SOP's and ensure that these SOP's are rigorously followed. * Mentor new employees. * Be a positive role model to all employees. * Predict all formulas using current lots of raw materials for manufacturing. * Print and verify correctness of all batch sheets for operations to use in production. * Apply re-blend, when possible, to all batches. * Work with batching to use up WIP, partial bulk bags, and Dead Stock raw materials. * Recommend measures to improve inspection and production methods, equipment performance, and quality of product. * Suggests changes in working conditions and use of equipment to increase efficiency of production. * Analyze and resolve work problems or assists workers in solving work problems. * Initiate or suggest plans to motivate workers to achieve work goals. * Maintain quality records (i.e. batch sheets and prediction and bulk batch print outs). * Work to eliminate all waste. * Help implement World Class Manufacturing and Quality initiatives. * Perform work of others as directed. This job description illustrates the types of duties performed in this job. It is not intended to be an exhaustive listing of each essential function of the job. Employees in this job may be required to perform other duties as assigned by supervisors although not specifically listed herein and those duties may be essential to the job. Because job content may change from time to time, the Company reserves the right to add and/or delete tasks from this job at any time. Qualifications * Must be physically and mentally fit for duty. * Must be at least 18 years old. * Dependable and able to maintain the attendance required to perform the job. * Must have work and educational experience to satisfy job competencies. Able to participate in external training. * Must be able to compute basic math functions: Calculate % of additives needed, Calculate % moisture present in sample, add, subtract, multiply and divide. Mut be able to operate using units of American money and weight measurement, volume, and distance. Must be familiar with metric units as well. * Ability to read, write, comprehend, and fully understand: SOPs, SDSs, labeling, safety and health regulations, and procedures within the job, this job group and the plant. * Ability to operate computerized equipment, read scales, recognize product problems, malfunctions, and patterns out of specification. * Thorough knowledge of Microsoft Office is essential, particularly Excel graphing and charting. * Good human relation skills and a practical approach to problem solving are necessary. * Ability to maintain close attention to detail and accuracy. Working Environment * The job is in a dusty and dirty environment. * Working in a hot and/or cold environment. * Shift varies from early morning start, evenings and weekends. * Required to wear respirator, safety glasses, hearing protection, and safety shoes. Physical Requirements * Work requires sitting, standing, and/or walking for long periods of time. * Must be able to qualify for and wear a respirator Allied Mineral Products offers competitive wages, health, dental, STD, LTD, ESOP retirement plan and profit sharing. Passing a drug screen is required prior to starting work should an offer be made. Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.

QA Tech, Predictions Allied Mineral Products is a leading manufacturer of monolithic refractories worldwide. We are seeking a QA Tech. in our Columbus, Ohio plant. The QA Tech, under the direction of the Quality Assurance Supervisor, confirm that the quality of incoming raw materials and finished products is maintained at acceptable levels. Also, it must ensure all Quality and Production related Standard Operating Procedures (SOP's) are followed. Duties and Responsibilities * Complete all laboratory work requests assigned. Also participate in performing all pertinent tests for COA's. * Maintain an orderly file on work performed. This file is to contain all pertinent information regarding all work undertaken. * Observe and conduct practical evaluation tests as required. These tests include density test, flow tests, exotherms, screen analyses, moisture contents, bond detection, casting set times, workability tests, magnetic testing, etc. * Complete work assigned in evaluating raw material samples received. * Assist in the evaluation of all technical problems as requested. This could involve helping the Quality Assurance Department examine suspect raw material or finished product. This work is to be done at the direction of the Quality Supervisor, or Manager of Quality. * When requested, write reports on work completed and observations made. * Assist in the calculating, recording, and maintaining of up-to-date files on all tests and screen analyses performed. * Under the supervision of the Quality Assurance Supervisor, predict formula changes necessary by computations of variations in raw materials, and prepare batch sheets reflecting such changes prior to issuing to batching crews. * Prior to issuing to batching crews, be sure that the use of available re-blend is included on all batch sheets. Also make certain re-blend is used and reported; to verify the accuracy of Re-blend Inventory. * Help check the batches by watching the Batch Crew for batching errors and by observing the batches while being placed into the mixer systems. Check all labeling and dating of raw materials to ensure they are correct. * Verify all finished products are labeled and packaged correctly. Complete all QA tests and place the data into the computer system. Collect storage samples and keep them in order. Make certain all finished products are approved with a sticker before being placed into inventory. * Assist in the training of any new QA Technician, Sales Trainee, or other employee, as needed. * Assist in maintaining an orderly plant layout, particularly in raw materials, and with emphasis on the use of partial pallets, shortest rows of materials, and test materials. Also maintain all QA offices and keep them neat, clean and orderly. * Attend meetings and serve on various committees when requested. * Assist in the development of new test methods and procedures and recommend revisions of existing test procedures and forms. * Be familiar with the job duties of the Quality Assurance Supervisor, assume necessary duties in their absence. This job description illustrates the types of duties performed in this job. It is not intended to be an exhaustive listing of each essential function of the job. Employees in this job may be required to perform other duties as assigned by supervisors although not specifically listed herein and those duties may be essential to the job. Because job content may change from time to time, the Company reserves the right to add and/or delete tasks from this job at any time. Qualifications * Must be physically and mentally fit for duty. * Must be at least 18 years old. * Dependable and able to maintain the attendance required to perform the job. * Must be able to compute basic math functions: Calculate % of additives needed, Calculate % moisture present in sample, etc. * Ability to read, write, comprehend and fully understand: SOPs, SDSs, labeling, safety and health regulations, and procedures within the job, this job group and the plant. * Ability to operate computerized equipment, read scales, recognize product problems, malfunctions and patterns out of specification. * Thorough knowledge of Microsoft Office is essential, particularly Excel graphing and charting. * Good human relation skills and a practical approach to problem solving are necessary. * Ability to maintain close attention to detail and accuracy. * Associate degree in Ceramic Engineering or another technical field. An alternative would be at least five years' experience in the ceramics industry. Working Environment * The job is in a dusty and dirty environment. * Working in a hot and/or cold environment. * Required to wear respirator, safety glasses, hearing protection, and safety shoes. Physical Requirements * Must be able to qualify for and wear a respirator. * Work requires sitting, standing, and/or walking for long periods of time. Allied Mineral Products offers competitive wages, health, dental, STD, LTD, ESOP retirement plan and profit sharing. Passing a drug screen is required prior to starting work should an offer be made. Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.

QA Tech, Predictions Allied Mineral Products is a leading manufacturer of monolithic refractories worldwide. We are seeking a QA Tech. in our Columbus, Ohio plant. The QA Tech, under the direction of the Quality Assurance Supervisor, confirm that the quality of incoming raw materials and finished products is maintained at acceptable levels. Also, it must ensure all Quality and Production related Standard Operating Procedures (SOP's) are followed. Duties and Responsibilities Complete all laboratory work requests assigned. Also participate in performing all pertinent tests for COA's. Maintain an orderly file on work performed. This file is to contain all pertinent information regarding all work undertaken. Observe and conduct practical evaluation tests as required. These tests include density test, flow tests, exotherms, screen analyses, moisture contents, bond detection, casting set times, workability tests, magnetic testing, etc. Complete work assigned in evaluating raw material samples received. Assist in the evaluation of all technical problems as requested. This could involve helping the Quality Assurance Department examine suspect raw material or finished product. This work is to be done at the direction of the Quality Supervisor, or Manager of Quality. When requested, write reports on work completed and observations made. Assist in the calculating, recording, and maintaining of up-to-date files on all tests and screen analyses performed. Under the supervision of the Quality Assurance Supervisor, predict formula changes necessary by computations of variations in raw materials, and prepare batch sheets reflecting such changes prior to issuing to batching crews. Prior to issuing to batching crews, be sure that the use of available re-blend is included on all batch sheets. Also make certain re-blend is used and reported; to verify the accuracy of Re-blend Inventory. Help check the batches by watching the Batch Crew for batching errors and by observing the batches while being placed into the mixer systems. Check all labeling and dating of raw materials to ensure they are correct. Verify all finished products are labeled and packaged correctly. Complete all QA tests and place the data into the computer system. Collect storage samples and keep them in order. Make certain all finished products are approved with a sticker before being placed into inventory. Assist in the training of any new QA Technician, Sales Trainee, or other employee, as needed. Assist in maintaining an orderly plant layout, particularly in raw materials, and with emphasis on the use of partial pallets, shortest rows of materials, and test materials. Also maintain all QA offices and keep them neat, clean and orderly. Attend meetings and serve on various committees when requested. Assist in the development of new test methods and procedures and recommend revisions of existing test procedures and forms. Be familiar with the job duties of the Quality Assurance Supervisor, assume necessary duties in their absence. This job description illustrates the types of duties performed in this job. It is not intended to be an exhaustive listing of each essential function of the job. Employees in this job may be required to perform other duties as assigned by supervisors although not specifically listed herein and those duties may be essential to the job. Because job content may change from time to time, the Company reserves the right to add and/or delete tasks from this job at any time. Qualifications Must be physically and mentally fit for duty. Must be at least 18 years old. Dependable and able to maintain the attendance required to perform the job. Must be able to compute basic math functions: Calculate % of additives needed, Calculate % moisture present in sample, etc. Ability to read, write, comprehend and fully understand: SOPs, SDSs, labeling, safety and health regulations, and procedures within the job, this job group and the plant. Ability to operate computerized equipment, read scales, recognize product problems, malfunctions and patterns out of specification. Thorough knowledge of Microsoft Office is essential, particularly Excel graphing and charting. Good human relation skills and a practical approach to problem solving are necessary. Ability to maintain close attention to detail and accuracy. Associate degree in Ceramic Engineering or another technical field. An alternative would be at least five years' experience in the ceramics industry. Working Environment The job is in a dusty and dirty environment. Working in a hot and/or cold environment. Required to wear respirator, safety glasses, hearing protection, and safety shoes. Physical Requirements Must be able to qualify for and wear a respirator. Work requires sitting, standing, and/or walking for long periods of time. Allied Mineral Products offers competitive wages, health, dental, STD, LTD, ESOP retirement plan and profit sharing. Passing a drug screen is required prior to starting work should an offer be made. Allied Mineral Products Holding, Inc. is an Equal Opportunity Employer/Veterans/Disabled.

Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at ***************** POSITION SCOPE The Civil Engineering Construction Materials Testing Technician will sample, and test processed aggregates, asphalt, and/or concrete for quality related characteristics. Traveling to remote work sites within state lines is required. Travel to surrounding states is periodically required. $2500 Sign-On Bonus! * Bonuses Payable following 90 days of employment PRIMARY DUTIES * Perform aggregate, asphalt, and/or concrete laboratory testing using approved methods * Gather, test and log samples of material, ensuring quality in all phases of testing * Perform field testing at project sites under construction * Interact professionally and positively with client representatives, business partners, and co-workers * Adherent to all safety and protective equipment policies, demonstrating safe work practices and completing required safety training * Maintain accurate, detailed, legible records (written and electronic) of required testing results * Obtain and maintain current certifications as required for position * Must be able to safely operate nuclear gauge in accordance with company procedures * Must be able to accept guidance and direction from senior personnel * Must maintain required qualifications to operate company vehicles * Safety, Safety, Safety comply with all OSHA/MSHA and company policies, procedures, and standards of safety * Perform other duties as assigned REQUIREMENTS * High school diploma or equivalent * Geotechnical Experience * ATTI Certifications desired * 1 year of previous experience in aggregate, asphalt, and/or concrete related lab and field testing on road construction projects with demonstrated competence in work assignments is preferred * Job related certifications are preferred * Valid Driver's License is required * Acceptable MVR in accordance with Fisher's Company Vehicle Program policy is required * Must be a self-starter who is able to work effectively and efficiently with limited supervision * Basic math skills * Good communication and computer skills * Ability to lift and move up to 65 lbs. repeatedly daily * Ability to complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, rain, and snow * Ability to pass a pre-employment drug test * Travel to work sites within state lines is required * Travel to surrounding states is periodically required Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email ******************** or call the HR Department at ************** to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application.

Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at ***************** POSITION SCOPE The Civil Engineering Construction Materials Testing Technician will sample, and test processed aggregates, asphalt, and/or concrete for quality related characteristics. Traveling to remote work sites within state lines is . Travel to surrounding states is periodically . $2500 Sign-On Bonus! * Bonuses Payable following 90 days of employment PRIMARY DUTIES Perform aggregate, asphalt, and/or concrete laboratory testing using approved methods Gather, test and log samples of material, ensuring quality in all phases of testing Perform field testing at project sites under construction Interact professionally and positively with client representatives, business partners, and co-workers Adherent to all safety and protective equipment policies, demonstrating safe work practices and completing required safety training Maintain accurate, detailed, legible records (written and electronic) of required testing results Obtain and maintain current certifications as required for position Must be able to safely operate nuclear gauge in accordance with company procedures Must be able to accept guidance and direction from senior personnel Must maintain required qualifications to operate company vehicles Safety, Safety, Safety comply with all OSHA/MSHA and company policies, procedures, and standards of safety Perform other duties as assigned REQUIREMENTS High school diploma or equivalent Geotechnical Experience ATTI Certifications desired 1 year of previous experience in aggregate, asphalt, and/or concrete related lab and field testing on road construction projects with demonstrated competence in work assignments is preferred Job related certifications are preferred Valid Driver's License is required Acceptable MVR in accordance with Fisher's Company Vehicle Program policy is required Must be a self-starter who is able to work effectively and efficiently with limited supervision Basic math skills Good communication and computer skills Ability to lift and move up to 65 lbs. repeatedly daily Ability to complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, rain, and snow Ability to pass a pre-employment drug test Travel to work sites within state lines is required Travel to surrounding states is periodically required Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email ******************** or call the HR Department at ************** to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application.

Job Description Fisher Industries is a vertically integrated family of businesses that provides heavy civil construction and aggregate products across the United States. With over 70 years of experience, the company specializes in highways, bridges, aggregates, and large-scale infrastructure projects, supported by in-house capabilities in drilling, blasting, crushing, asphalt, and concrete production. Fisher is committed to delivering innovative, cost-effective solutions with an emphasis on safety and quality. As a proven industry leader, Fisher Industries continues to grow while maintaining the integrity and values of a family-owned company. For additional information about our company, visit our website at ***************** POSITION SCOPE The Civil Engineering Construction Materials Testing Technician will sample, and test processed aggregates, asphalt, and/or concrete for quality related characteristics. Traveling to remote work sites within state lines is required. Travel to surrounding states is periodically required. $2500 Sign-On Bonus! * Bonuses Payable following 90 days of employment PRIMARY DUTIES Perform aggregate, asphalt, and/or concrete laboratory testing using approved methods Gather, test and log samples of material, ensuring quality in all phases of testing Perform field testing at project sites under construction Interact professionally and positively with client representatives, business partners, and co-workers Adherent to all safety and protective equipment policies, demonstrating safe work practices and completing required safety training Maintain accurate, detailed, legible records (written and electronic) of required testing results Obtain and maintain current certifications as required for position Must be able to safely operate nuclear gauge in accordance with company procedures Must be able to accept guidance and direction from senior personnel Must maintain required qualifications to operate company vehicles Safety, Safety, Safety comply with all OSHA/MSHA and company policies, procedures, and standards of safety Perform other duties as assigned REQUIREMENTS High school diploma or equivalent Geotechnical Experience ATTI Certifications desired 1 year of previous experience in aggregate, asphalt, and/or concrete related lab and field testing on road construction projects with demonstrated competence in work assignments is preferred Job related certifications are preferred Valid Driver's License is required Acceptable MVR in accordance with Fisher's Company Vehicle Program policy is required Must be a self-starter who is able to work effectively and efficiently with limited supervision Basic math skills Good communication and computer skills Ability to lift and move up to 65 lbs. repeatedly daily Ability to complete work tasks under various adverse weather conditions including heat above 100 degrees, cold, rain, and snow Ability to pass a pre-employment drug test Travel to work sites within state lines is required Travel to surrounding states is periodically required Fisher Industries is an Equal Opportunity Employer. We are a drug-free work environment requiring pre-employment and random drug testing. Subject to background check. If you require an accommodation with applying, please email ******************** or call the HR Department at ************** to request accommodations. This email is only to request accommodation for the application process and is not an email to inquire about the status of your application. Job Posted by ApplicantPro

Quality Representative Location: Various | Full-time | Travel Required Strengthening our nation's power grid isn't easy, but reliable electrical service is essential to everyday life. Every time someone charges an iPhone, cranks up the A/C, or turns on a computer, we are busy behind the scenes making it happen. Michels Power, Inc. is one of the largest, most sought-after power delivery contractors in the United States. We execute the entire spectrum of electrical infrastructure projects-including the construction of transmission lines and substations, the modernization of distribution systems, and the development of both Oil & Gas facilities and Renewable Energy initiatives. We also restore power after natural disasters strike. Our work improves lives. Find out how a career at Michels Power, Inc. can change yours. As a Quality Representative, your key responsibilities will be in assisting operations with implementation and compliance of existing Quality Assurance/Quality Control (QA/QC) programs. This position conducts jobsite inspections and assessments to ensure adherence to quality expectations in accordance with project specifications and industry standards. Critical for success is the ability to work independently and maintain strong attention to detail while working in a fast-paced environment. Why Michels Power, Inc.? Engineering News-Record ranks us the No. 1 Electrical Transmission/Distribution contractor in the U.S. We're a national leader in substation and transmission construction with a long track record of success. Our steady, strategic growth revolves around a commitment to quality. We are family owned and operated. We invest an average of $5,000 per employee per year in training and career development. We perform high-impact, essential work that supports homes, businesses, and communities. We believe everyone is responsible for promoting safety-regardless of title. We're part of the Michels family of companies-one of North America's largest and most diversified energy and infrastructure contractors. We offer a comprehensive benefits program including: Health, Dental, and Life Insurance Flexible Spending Accounts (FSA) and Health Savings Account (HSA) Short- and Long-Term Disability Insurance 401(k) Retirement Plan Legal Assistance and Identity Theft Protection Plans (Benefits may vary based on position and location) Why you? You like to surround yourself with dedicated, value-driven people. You thrive on new challenges and evolving technologies. You think “we've always done it this way” is not a good enough reason. You want to know your efforts are recognized and appreciated. You like making your own decisions-with the right support. You want to be part of a team that improves lives through essential infrastructure. What it takes? 5+ years of construction experience in the electrical industry Experience in reviewing and understanding construction blueprints and schematics QA/QC Certification in ISO or the American Society for Quality (Preferred) Proficient in Microsoft Office Suite A valid driver license for the type(s) of vehicles which may be driven and an acceptable driving record Ability to travel and commit to long term onsite projects Join a company that powers progress. Be a part of Michels Power, Inc.-where you don't just build projects, you build a career. AA/EOE/M/W/Vet/Disability ***************************************************

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

About the Organization RENK America is a leading supplier in the defense, marine and industry sector with superior mobility, propulsion and drive train solutions. Our tradition is centered on precision-engineered systems for maximum impact, efficiency and endurance. RENK's ambition is to support each and every one of its customers to exceed standards in harsh conditions and combat situations. RENK America employs over 500 employees at our US locations in Muskegon, Michigan, Cincinnati, Ohio, Camby, Indiana and Roseville, Michigan. RENK America is driven by this sense of pride and purpose in our country and our community. Description **Responsibilities:** + Use precision measuring instruments to very close tolerance requirements. + Use and interpret precision measuring instruments + Work from written procedures, complex drawings and blueprints, sketches, operations sheets, specifications and instructions to plan work operations + Monitor quality of own work to assure adherence to quality standards and prepare detailed inspection reports as required, document non-conformances. + Determine and report any inefficiencies, defective materials, unusual conditions and machining issues + Keep required time and maintain productions records. + Responsible for the safety and clean-up of own area + Adhere to all safety guidelines and procedures Position Requirements **Requirements:** + High School diploma or equivalent required + Prefer 3-5 years' experience in a similar capacity + Must be able to use standard inspection equipment, ID or OD mics, dial bore gages, digital or dial calipers, thread gages, etc. + Read and interpret technical drawings and blueprints + Knowledge of CMM inspections, Magnetic Particle inspections and knowledge of SPC a plus. + Good math, language, reading skills + Analytical skills + Attention to detail + Visual Acuity + Some lifting of various weights, both assisted and unassisted + Shop environment, exposed to shop elements + May work in tight and/or cramped spaces + Walking, standing, lifting, stooping, reaching + Some lifting of various weights, both assisted and unassisted + Strong attention to detail and accuracy + Teamwork and communication skills + Must be authorized to work in the US Full-Time/Part-Time Full-Time Exempt/Non-Exempt Non-Exempt EOE Statement RENK America is proud to be an Affirmative Action/Equal Opportunity Employer. RENK America is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. RENK America maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. This position is currently accepting applications.

Responsibilities: Use precision measuring instruments to very close tolerance requirements. Use and interpret precision measuring instruments Work from written procedures, complex drawings and blueprints, sketches, operations sheets, specifications and instructions to plan work operations Monitor quality of own work to assure adherence to quality standards and prepare detailed inspection reports as required, document non-conformances. Determine and report any inefficiencies, defective materials, unusual conditions and machining issues Keep required time and maintain productions records. Responsible for the safety and clean-up of own area Adhere to all safety guidelines and procedures

Starting Pay: $19.00-$21.00 an hour including a 10% shift differential for working nights! Schedule: 2 Openings Available on C and D Crew: 5:45PM-6AM on a rotating 2/2/3 schedule! ESSENTIAL FUNCTIONS: Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s): * Acts as auditor for quality results of Cell * Acts as point of contact for Cell Technical Lead regarding quality * Performs product quality checks every two hours * Performs hourly part checks * Responsible for use/handling of quality measuring devices * Responsible for accurate completion of quality paperwork * Audits color and part checks * Responsible for saving/scrapping decisions * Owns "Red tag process" (marking product of questionable quality) for Cell * Audits process set point * Performs line clearance / first article inspection * Generates product package labels for cell * Audits label and rate schedule * Collects flex samples * Maintains standards for product quality-testing areas within plant * Operates in a manner that provides value to the team * Additional duties as needed and/or assigned by supervision/management SKILLS & ABILITIES: Education: High School Graduate or General Education Degree (GED): Required Experience: Experience with Statistical Process Control (SPC) preferred; Experience with ISO9000/QS9000/TS16949 Quality Systems & Auditing, a plus Four year business-related engineering degree acceptable substitute for previous work experience requirements Certifications & Licenses: Meet qualification and certification requirements established by TimberTech"s Training Resources and Knowledge (TRAK) program Equal Opportunity Employer The AZEK Company has been acquired by James Hardie. James Hardie is the industry leader in exterior home and outdoor living solutions, with brands including Hardie, TimberTech, AZEK Exteriors, Versatex, fermacell, and StruXure. With 8,000+ employees worldwide, we're united by our purpose of Building a Better Future for All through sustainable innovation, a Zero Harm culture, and a commitment to empowering our people and communities. For more information, visit ******************** James Hardie Building Products Inc. is an equal opportunity employer. All qualified applicants will receive consideration without regard to protected characteristics under applicable law. For more information about your rights, please review the Know Your Rights notice from the Department of Labor.

Job Description Starting Pay: $19.00-$21.00 an hour including a 10% shift differential for working nights! Schedule: 2 Openings Available on C and D Crew: 5:45PM-6AM on a rotating 2/2/3 schedule! ESSENTIAL FUNCTIONS: Reasonable Accommodations Statement To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s): • Acts as auditor for quality results of Cell • Acts as point of contact for Cell Technical Lead regarding quality • Performs product quality checks every two hours • Performs hourly part checks • Responsible for use/handling of quality measuring devices • Responsible for accurate completion of quality paperwork • Audits color and part checks • Responsible for saving/scrapping decisions • Owns “Red tag process” (marking product of questionable quality) for Cell • Audits process set point • Performs line clearance / first article inspection • Generates product package labels for cell • Audits label and rate schedule • Collects flex samples • Maintains standards for product quality-testing areas within plant • Operates in a manner that provides value to the team • Additional duties as needed and/or assigned by supervision/management SKILLS & ABILITIES: Education: High School Graduate or General Education Degree (GED): Required Experience: Experience with Statistical Process Control (SPC) preferred; Experience with ISO9000/QS9000/TS16949 Quality Systems & Auditing, a plus Four year business-related engineering degree acceptable substitute for previous work experience requirements Certifications & Licenses: Meet qualification and certification requirements established by TimberTech"s Training Resources and Knowledge (TRAK) program Equal Opportunity Employer The AZEK Company has been acquired by James Hardie. James Hardie is the industry leader in exterior home and outdoor living solutions, with brands including Hardie , TimberTech , AZEK Exteriors, Versatex , fermacell , and StruXure . With 8,000+ employees worldwide, we're united by our purpose of Building a Better Future for All™ through sustainable innovation, a Zero Harm culture, and a commitment to empowering our people and communities. For more information, visit ******************** James Hardie Building Products Inc. is an equal opportunity employer. All qualified applicants will receive consideration without regard to protected characteristics under applicable law. For more information about your rights, please review the Know Your Rights notice from the Department of Labor.

Kokosing Materials, Inc. (KMI) has been a leader in the asphalt production industry since 1980. With 19 asphalt plants across central and Northern Ohio, as well as liquid asphalt terminals in Wheelersburg and Mansfield, KMI is dedicated to producing high-quality asphalt products and providing exceptional customer service. We pride ourselves on our commitment to safety, integrity, and sustainability, continuously investing in our plants to ensure they operate efficiently and meet the highest environmental standards. Through our partnership with Kokosing, we leverage shared expertise and resources to deliver innovative solutions and contribute to building Ohio's infrastructure. Join KMI and be part of a company that values safety, integrity and quality. : Position Summary: Kokosing Materials Inc. (KMI) is seeking a detail-oriented candidate to join our team as a Quality Control Coordinator. This role is primarily responsible for information exchange, by means of: tracking, archiving, and distributing asphalt test information from our production teams. The Quality Control Coordinator will work closely with the operation, quality control, and field density teams to maintain efficient and effective information exchange. The ideal candidate will have familiarity with ODOT/FAA/AASHTO specifications, and possess strong organizational skills, attention to detail, and a problem-solving mindset. This position requires excellent communication skills, a proactive approach, and multitasking abilities. KMI offers a comprehensive mentored learning environment for potential candidates that may need support in one or more of the aforementioned qualities. This role is located in Mansfield, OH (Terminal and Mix Design Laboratory). ESSENTIAL Duties and Responsibilities: Create and maintain the procedures and system controls for reviewing, distributing, and archiving information. Assist the company with maintaining compliance by adhering to internal standards and external regulatory controls. Gather and analyze data from test results and create reports to present findings to suggest process improvements. Support the sales and scheduling departments by answering bid related questions, such as specification clarifications and mix design status updates. Coordinate the mix design process teams and external client schedules to ensure the proposed production schedules are maintained. Track and report mix related issues, and participate in generating conflict resolution reporting. Perform other duties as assigned. Education and Experience: Bachelor's degree or equivalent (bachelor's degree in analytics and statistics is a plus). Basic understanding of construction materials (asphalt, aggregates, etc.) or willingness to learn. Familiarity with ODOT/FAA/AASHTO specifications is preferred. Ability to read and interpret technical data or specifications. 5 years in the asphalt industry preferred Knowledge, Skills and Abilities: Prior experience in the asphalt industry is preferred. Basic proficiency in Microsoft Office (Excel, Word, Outlook). Ability to communicate and collaborate effectively with clients, colleagues, and supervisors. Ability to organize and prioritize tasks effectively. Ability to identify and resolve material-related issues. Accuracy in record-keeping and material archiving. Relationships: Reports to the Quality Control Lab Manager and closely interacts with all levels of team members within the organization. Working environment and physical activities: 100% of duties will be performed in an indoor temperature controlled, fluorescent-lit environment: processing data, performing projections, identifying mix design limitations, and communicating with management and associates. Some lifting between 0 -20 lbs. is occasionally required. Please Note: This is intended as a general summary of the position; however, the individual will be expected to perform any functions or responsibilities that may be assigned from time to time. The functions and responsibilities of the position may change over time, in special circumstances, or on an individual basis. This job description is not intended to limit or otherwise affect the work to be performed or assigned. Kokosing Materials offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. Kokosing Materials is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.