Computer Aided Design Designer jobs at Suncoast Post-Tension

CAD Technician Joliet, IL 6-month contract-to-hire Pay Range: $40-$50 per hour W2 + Benefits Duties & Responsibilities: Perform assignments of a varied nature, requiring a solid understanding of the fundamental of CAD, mapping, and 3D modeling. Perform work with general guidance and supervision or provide support to more experienced personnel. Provide support to field staff. Interpret field notes and sketches. Perform technical computations and produce large scale, complex drawings. Provide and gather data relevant to the shape, contour, gravitation, location, elevation, or dimension of land or land features on or near the earth's surface for engineering, construction, and other purposes. Assist in creating plans, maps, reports, and legal descriptions of surveys. Attend meetings as needed with Project Managers and Surveyors, in addition to clients and consultants. Visit client facilities and/or construction sites as needed. Perform all work in a safe and responsible manner, in accordance with the Health and Safety Plan. Perform other duties as assigned. Job Qualifications: High School Graduate or equivalent required. Associate Degree and/or Civil Technician Certificate a plus. 2 or more years of AutoCAD experience, Civil 3D experience is a preferred. Surveying CAD experience preferred (surface modeling, topographic drawing production, point calculations, etc.) Experience with Revit, Three-dimensional CAD, and/or point cloud experience is a plus. Proficient in Microsoft Office Suite, particularly Excel. Detail-oriented with excellent oral and written communication skills. Ability to visit and safely traverse construction and project sites, and complying with all applicable safety codes and requirements. NOTE: This position will work primarily in the office, preparing drawings of data collected by field staff.

Would you like to be part of a family who loves to take on exciting challenges? Metromont LLC has been one of the leaders in the construction industry for nearly a century and is currently accepting resumes to be part of our dynamic team! Metromont was founded in 1925 on the principles of faith, honor, and passion, and almost 100 years later, those values are still the foundation of who we are and everything we do. A third-generation company with nearly 1,500 associates across six manufacturing facilities in South Carolina, Georgia, Florida, and Virginia, Metromont is a leader and pioneer in the engineering and manufacturing of precast concrete. Most of all, were a trusted partner, working side-by-side with our customers from the earliest stages of project design through turnover of the completed structure. In addition to the production of precast concrete, Metromont provides our customers with complementary design and engineering, hauling, erection, and field services to support their full construction needs. Across the eastern seaboard, the southeast, and even as far west as Arizona, our customers rely on us to provide innovative precast solutions and the best quality for their parking structures, data centers, multifamily housing, office buildings, warehouses, schools, and stadiums. And we do, because a trusted partner is who we are and who weve been for nearly a century. Senior Project Drafter JOB DATA Department Code: 817X Account Code: 702500 Department Name: Drafting Account Name: Clerical Tech/Non-Exempt POSITION PURPOSE The Senior Project Drafter designs and prepares complete and accurate erection drawings, shop tickets, material requisitions and revisions for complex projects, integrating skilled architectural/engineering drafting methods, and procedures with the operation and application of computer-aided design (CAD) equipment and software. RESPONSIBILITIES Provides leadership and direction to project drafters Design and prepare electronic (CAD) erection drawings, shop tickets, and material requisitions from contract drawings and engineering calculations Interface with departmental personnel to obtain details of equipment and materials requirements Prepare plans, elevations, sections, and material requirements from sketches, specifications, contract drawings and responses to requests for information provided by architects, engineers, general contractors, subcontractors, and Metromonts internal project management team Consult with engineers and project managers as needed to resolve questions Revise computer-aided designs and documents to comply with comments and changes to project scope Provide technical guidance to the Project Drafter regarding coordination of details between shop tickets and erection drawings Coordinates drafting work with engineers and architects Serves as a lead in providing direction to drafters SCOPE OF AUTHORITY Assists in supervising 8-10 Project Drafters Reviews work of Project Drafters Report to Drafting Manager CHARACTERISTICS (Knowledge, Skills, and Abilities) Able to read blueprints and drawings Able to create detailed electronic (CAD) working plans from data Able to make basic computations for strength and other features as required Follow pre-established guidelines Follow established technical specifications to prepare drawings Clear and effective written and verbal communication skills EDUCATION AND TECHNOLOGY Associate Degree in Design, Architecture, or related field with coursework in computer-aided design (CAD) Knowledge of Revit preferred Minimum two (2) years drafting experience WORK ENVIRONMENT / SCHEDULE Typically works in an office environment Typically works inside in an open (cubicle) office environment Monday Friday, 8am 5pm; schedule flexibility may be required to meet deadlines INTERNAL PROGRESSION Previous roles may include: Project Drafter Lateral roles may include: Drafting Coordinator Future roles may include: Drafting Manager TRAINING AND DEVELOPMENT General HR Orientation Revit Training PERSONAL PROTECTION EQUIPMENT (PPE) PHYSICAL REQUIREMENTS This is an office position which requires sitting, standing, and walking. Disclaimer: This job description is not intended to be all-inclusive. Other duties as assigned may be required. All associates are expected to conduct themselves in a manner that is consistent with Metromonts core values and to actively participate in all company safety, training, and observation programs. Metromont LLC (Company) is an equal opportunity employer. The Company is committed to the spirit and letter of all federal, state and local laws and regulations pertaining to equal opportunity. To this end, the Company does not discriminate against any individual with regard to race, color, religion, sex, gender identity, sexual orientation, pregnancy (including medical needs due to pregnancy, child birth or other medical conditions), national origin, age, disability, genetic information, veteran status, or other protected status. This Policy extends to all terms, conditions and privileges of employment, as well as the use of all Company facilities. The Company is also committed to making reasonable accommodations based on an individuals disability, religion, pregnancy, childbirth and related medical conditions (including, but not limited to, lactation), or any other protected status where a reasonable accommodation is required under the law. No form of unlawful discrimination, unlawful harassment, unlawful refusal to reasonably accommodate or unlawful retaliation will be tolerated. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. xevrcyc However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractors legal duty to furnish information. 41 CFR 60-1.35(c) Job Details Pay Type Hourly Travel Required Travel Required PI500f66e16bc

Electrical Design Manager - As a strong and stable company since 1960, Holder provides nationwide construction management services on complex projects in the aviation, office, technology, education, hospitality, and interiors markets. Our mission is to provide clients with quality construction services, across the country, supported by our offices in Atlanta, Charlotte, Columbus, Dallas, Denver, Phoenix, San Jose and Washington, DC. At Holder, our most valuable resources are our people, who carry forth our core values, brand, and reputation for performance. We are seeking a highly motivated Electrical Design Manager to join our team in the Herndon or Atlanta that will support Mission Critical construction operations throughout the country. The ideal candidate for this job is a team player who thrives in a challenging and fast-paced yet supported environment. Your job is to do whatever it takes to help the team succeed. Required Experiences And Skills Has experience with the design process and management of complex Mission Critical projects, including processes, teams, and deliverables Understands risks and roles associated with varying project delivery methods Understands principals of contract documents and agreements Takes initiative to identify, track and actively address design and engineering challenges during the design and construction phases of a project. Ability to read construction drawings and specifications with primary experience with electrical and controls. Understanding and able to reference and apply National Electrical Code (NEC) standards and requirements. Ability to proactively articulate design document expectations and assess actual document status by phase (SD, DD, CD) Ability to conduct cross-discipline drawing coordination and design completion/quality reviews specifically for the MEP disciplines. Can contribute constructability, technical expertise and engineering solutions to a project's design evolution Ability to lead and manage the creation of Integrated Electrical Room concepts based on client or projected selected equipment. Ability to manage subcontractors in the completion of integrated design concepts to finalized products ready for manufacturing. Outstanding communication and time management skills Ability to work in a highly-collaborative environment Ability to work with minimal supervision; self-starter Ability to coach and mentor junior associates Manage deadlines, maintain files, and provide reporting to department leadership and/or jobsite leadership Requirements For This Position Include Candidate will preferably have 5-8+ Years in an Engineering position. Excellent verbal and written communication skills - ability to effectively communicate across projects and departments with associates of varying skill level. Also, be able to effectively communicate with third party organizations and consulting entities. Earn the trust of associates but maintain ability to independently assess and evaluate issues. Ability to have difficult conversations, free of emotion. Have a high level of morality and ethics. Proactively adjust priorities based on department, project and company needs and communicate adjustments. Be strategic and solutions/goal oriented and detail-oriented, but flexible to changes in plan. Independent worker with a collaborative mindset. Ability to effectively collect information and ask questions, analyze, evaluate, and make recommendations and then organize the appropriate teams for group decision making. Good listener and detail oriented. Escalate issues timely. Ability to innovate and comfortable being introduced to new technology. Maintains a continuous improvement mindset. Proficient in Microsoft based software including Word, Excel, Outlook, and PowerPoint. Highly organized, detail oriented. Coach and mentor others with meaningful feedback. Open to receiving meaningful feedback. Be open to additional responsibilities as role and department services evolve.

At Cavco Industries, Inc. (NASDAQ CVCO), our 7000 team members are at the heart of everything we do. We design and produce quality, affordable factory-built homes. We are also a leading producer of park model RVs, vacation cabins and factory-built commercial structures. In addition to providing competitive pay and benefits, we provide opportunities for development and upward mobility, while investing in the communities we serve. Our values are our foundation. We're constantly striving to diversify our teams to ensure we have the best and brightest talent. We're deeply committed to creating an inclusive and equitable workplace where each person can contribute. ABOUT THE ROLE The Drafter is responsible for producing drawing files for production facilities and submitting plans for approval by following customer orders, building codes and company standards. ESSENTIAL DUTIES & RESPONSIBILITIES Develops accurate and complete production drawings, layout diagrams, schematics and construction documents. Communicate and collaborate with production team regarding print related items. Communicate and collaborate with sales regarding orders. Keeps abreast of current Drafting Standards to maintain continuity during the drawing and bill of material development process. Perform other duties as assigned. MINIMUM QUALIFICATIONS High School Diploma. Drafting Fundamentals exposure, degree in drafting preferred. General knowledge of constructions standards. Strong computer skills and understanding of relevant software packages. Strong mechanical skills. Motivated self-starter with a strong tolerance for change.

The Design Manager will be responsible for overseeing the design process during the preconstruction phase, ensuring that projects are efficiently planned and executed. This role will require strong leadership, collaboration, and technical expertise in commercial and industrial construction. The ideal candidate will drive design excellence and coordinate with various stakeholders to deliver successful projects. Key Responsibilities The list below is not an exhaustive list of duties and responsibilities. This professional in this role will be expected to perform different tasks as necessitated by the position's changing role within the organization and the overall business objectives of the organization. · Lead and managed the preconstruction design team, overseeing all design activities for commercial and industrial projects. · Collaborate with project managers, architects, engineers, and clients to develop comprehensive design solutions that align with project goals and requirements. · Ensure the production of high-quality design documents, including plans, specifications, and details, using industry-standard software (e.g., Revit, AutoCAD). · Conduct feasibility studies and site analyses to inform design decisions and optimize project outcomes. · Review and refine design concepts, providing technical guidance and support to team members. · Coordinate with subcontractors and suppliers to gather input on design feasibility, material selection, and construction methods. · Stay current on industry trends, building codes, and best practices related to tilt-up construction and civil engineering. · Prepare and present design proposals and concepts to clients and stakeholders, effectively communicating project insights and value. · Foster a collaborative and innovative team environment, promoting professional development and continuous improvement. · Collaborate with the operations team as needed to ensure that RFIs (Requests for Information), ASIs (Architectural Supplemental Instructions), and submittals are efficiently managed, so they do not limit or hinder project progress. Qualifications · Bachelor's degree (B.A.) in Architecture from a four-year college or university. · Minimum of 5 years of experience in a design-management role within the architecture or construction industry, with a focus on commercial and industrial projects. · Must have a valid Nevada driver's license. · Current NV architectural certification/license required. · Proven experience in managing and mentoring design teams, fostering a positive and productive work environment. · Strong proficiency in software such as AutoCAD/Revit, BIM 360, Twin Motion, Bluebeam, etc. with exceptional drafting and modeling skills. · VDC experience. · Proficiency in Microsoft Office (Word, Outlook, Excel, PowerPoint). · In-depth understanding of tilt-up construction methods, civil engineering principles, and relevant building codes. · Excellent communication and interpersonal skills, with the ability to collaborate effectively across various disciplines. · Strong attention to detail and problem-solving abilities. · Ability to manage multiple projects and priorities in a fast-paced office environment. Work Environment/ Physical Demands The work environment and physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. · Work is performed in an office environment and requires the ability to operate standard office equipment and keyboards. Must have the ability to walk short distances, and/or drive a vehicle to deliver and pick up materials. · The noise level in the office work environment is usually quiet. · While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. · The employee is frequently required to sit. The employee is occasionally required to stand, walk, climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. · The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Benefits · Competitive salary based on experience · Comprehensive health, dental, and vision insurance · 401(k) plan with company safe harbor contribution · Paid time off (PTO) and holidays · Professional development opportunities · A positive and collaborative work environment Why United Construction? At United Construction Company, we foster a vibrant and inclusive work environment where all team members contributions are deeply valued, and professional growth is nurtured with care. With a legacy of delivering exceptional projects across the United States, our team is renowned for its unwavering integrity, collaborative spirit, and relentless pursuit of excellence. Join us to build not just structures, but meaningful careers and lasting relationships, grounded in trust and a shared commitment to making a positive impact. United Construction is an equal-opportunity employer. Employment at United Construction is based solely on a person's merit and qualifications directly related to professional competence. United Construction does not discriminate against any employee or applicant because of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy or related condition (including breastfeeding), or any other basis protected by law.

Electrical Design Manager - As a strong and stable company since 1960, Holder provides nationwide construction management services on complex projects in the aviation, office, technology, education, hospitality, and interiors markets. Our mission is to provide clients with quality construction services, across the country, supported by our offices in Atlanta, Charlotte, Columbus, Dallas, Denver, Phoenix, San Jose and Washington, DC. At Holder, our most valuable resources are our people, who carry forth our core values, brand, and reputation for performance. We are seeking a highly motivated Electrical Design Manager to join our team in the Atlanta that will support Mission Critical construction operations throughout the country. The ideal candidate for this job is a team player who thrives in a challenging and fast-paced yet supported environment. Your job is to do whatever it takes to help the team succeed. Required Experiences And Skills Has experience with the design process and management of complex Mission Critical projects, including processes, teams, and deliverables Understands risks and roles associated with varying project delivery methods Understands principals of contract documents and agreements Takes initiative to identify, track and actively address design and engineering challenges during the design and construction phases of a project. Ability to read construction drawings and specifications with primary experience with electrical and controls. Understanding and able to reference and apply National Electrical Code (NEC) standards and requirements. Ability to proactively articulate design document expectations and assess actual document status by phase (SD, DD, CD) Ability to conduct cross-discipline drawing coordination and design completion/quality reviews specifically for the MEP disciplines. Can contribute constructability, technical expertise and engineering solutions to a project's design evolution Ability to lead and manage the creation of Integrated Electrical Room concepts based on client or projected selected equipment. Ability to manage subcontractors in the completion of integrated design concepts to finalized products ready for manufacturing. Outstanding communication and time management skills Ability to work in a highly-collaborative environment Ability to work with minimal supervision; self-starter Ability to coach and mentor junior associates Manage deadlines, maintain files, and provide reporting to department leadership and/or jobsite leadership Requirements For This Position Include Candidate will preferably have 5-8+ Years in an Engineering position. Excellent verbal and written communication skills - ability to effectively communicate across projects and departments with associates of varying skill level. Also, be able to effectively communicate with third party organizations and consulting entities. Earn the trust of associates but maintain ability to independently assess and evaluate issues. Ability to have difficult conversations, free of emotion. Have a high level of morality and ethics. Proactively adjust priorities based on department, project and company needs and communicate adjustments. Be strategic and solutions/goal oriented and detail-oriented, but flexible to changes in plan. Independent worker with a collaborative mindset. Ability to effectively collect information and ask questions, analyze, evaluate, and make recommendations and then organize the appropriate teams for group decision making. Good listener and detail oriented. Escalate issues timely. Ability to innovate and comfortable being introduced to new technology. Maintains a continuous improvement mindset. Proficient in Microsoft based software including Word, Excel, Outlook, and PowerPoint. Highly organized, detail oriented. Coach and mentor others with meaningful feedback. Open to receiving meaningful feedback. Be open to additional responsibilities as role and department services evolve.

We currently have a need for an Architectural Project Designer to participate in the design, documentation and construction administration for K-12, Healthcare and Municipal projects for our Boston, MA Office. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E and Construction Management firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston, Needham, MA and Metro Park, NJ. Responsibilities Prepares design documentation including surveys, reports, architectural drawings, details and specifications throughout all project phases in line with the project delivery schedule Actively coordinates with internal and external engineering consultants, including Survey, MEP, Civil, Environmental, Cost Estimators and Structural disciplines Research products and materials Performs design and constructability reviews with the Technical Director at all phases of the project Reviewing design documents and construction estimates Qualifications Bachelor's Degree in architecture from an accredited college is required. 5-10 years U. S. experience in building design and construction document preparation Professional License is required Experience in K-12, Healthcare and Municipal project work a big+ Demonstrated knowledge of Revit is required Proficiency with 3D Modeling software such as Sketch Up Pro, Rhino 3D Max or Adobe Creative Suite is a plus Strong conceptual, communication, planning and organization skills and capability of working both individually and in a team environment on a variety of projects and tasks We are committed to your success, and we invest in your growth and development to unlock your full potential. Competitive Total Compensation Package Employee- Only Stock Purchase Plan Mentoring programs Continuing Education Program Employee referral bonus Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. - We offer a competitive salary commensurate with experience, a comprehensive benefits package and a positive work environment. - The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 PIb6daedc51a1e-30***********8

CAD Technician Burns Harbor, IN 6-month contract-to-hire Pay Range: $40-$50 per hour W2 + Benefits Duties & Responsibilities: Perform assignments of a varied nature, requiring a solid understanding of the fundamental of CAD, mapping, and 3D modeling. Perform work with general guidance and supervision or provide support to more experienced personnel. Provide support to field staff. Interpret field notes and sketches. Perform technical computations and produce large scale, complex drawings. Provide and gather data relevant to the shape, contour, gravitation, location, elevation, or dimension of land or land features on or near the earth's surface for engineering, construction, and other purposes. Assist in creating plans, maps, reports, and legal descriptions of surveys. Attend meetings as needed with Project Managers and Surveyors, in addition to clients and consultants. Visit client facilities and/or construction sites as needed. Perform all work in a safe and responsible manner, in accordance with the Health and Safety Plan. Perform other duties as assigned. Job Qualifications: High School Graduate or equivalent required. Associate Degree and/or Civil Technician Certificate a plus. 2 or more years of AutoCAD experience, Civil 3D experience is a preferred. Surveying CAD experience preferred (surface modeling, topographic drawing production, point calculations, etc.) Experience with Revit, Three-dimensional CAD, and/or point cloud experience is a plus. Proficient in Microsoft Office Suite, particularly Excel. Detail-oriented with excellent oral and written communication skills. Ability to visit and safely traverse construction and project sites, and complying with all applicable safety codes and requirements. NOTE: This position will work primarily in the office, preparing drawings of data collected by field staff.

Job Purpose The purpose of this job is to assist the Virtual Construction Team in modeling, detailing and coordinating the mechanical systems of projects. Duties and Responsibilities Revit is required for this job· Software Training · Complete internal Revit MEP fundamentals and collaboration tools training courses · Review online tutorials · Complete various training programs as prescribed by manager and coordinator Industry standards training · Engage in in-house industry standards training, provided by coordinator · Understand project documents · Recognize applicable codes · Adhere to VDC/BIM standards · Complete various training programs as prescribed by manager and coordinator Project Interface · Model MEP systems in Revit (Sack Company is an MEP Contractor but we are primarily looking for a electrical designer/BIM operator for this position) · Sheet and detail models · Deliver models and sheet sets to coordinator for verification Qualifications 2 years of experience in modeling for electrical projects 4 year degree in engineering or design from an accredited university or college is preferred Basic computer skills required, advanced computer skills a plus Basic math skills Use of 3D modeling software a plus, i.e. Revit, AutoCAD, etc. The ability to follow instruction and work under limited supervision The aptitude to learn new processes and procedures as needed Working Conditions Work is performed in an office environment on a computer. Occasional job site visits may be required Physical Requirements · Stand or sit at desk for long periods of time · Perform work on a computer for long periods of time Software Used · Autodesk AEC Collection, mainly Revit, AutoCAD and Navisworks · Trimble Sysque · BlueBeam & Microsoft Office Suite Protective Equipment · Job site visits may require safety glasses, safety shoes, hard hat, gloves, hearing protection, safety harness and other equipment as required · Travel · Occasional travel to job sites as required Other Notes: While Sack is an MEP contractor, we are looking for a BIM Modeler to support our MEP construction team. We will accept and consider applications from associate to senior level people. Sack company has offices in Statesboro, Ga, Lexington, SC, and Dublin, Ga. We will consider someone to work out of the Lexington SC office.

Redwood Electric Group is looking for a detail-oriented and technically skilled Electrical PV Designer to support our project teams in the design and drafting of photovoltaic and energy storage systems. This role plays a critical part in ensuring the accuracy, efficiency, and code compliance of our electrical designs while collaborating closely with engineers, project managers, and construction teams. About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities Develop electrical single-line diagrams for AC and DC PV systems. Design PV array layouts, considering site conditions, shading, and component options. Perform electrical calculations, including voltage drop, conductor sizing, and inverter loading. Select appropriate PV modules, inverters, combiners boxes, and other system components. Create detailed electrical drawings, including site plans, equipment layouts, and installation details. Ensure compliance with the California Electrical Code (CEC) and other relevant codes and standards. Utilize PV design and Autodesk software and to create accurate and efficient designs. Coordinate with structural engineers on mounting system design and integration. Collaborate with engineers, project managers, and construction teams to integrate electrical designs into overall project plans. Provide technical support during the installation and commissioning phases of PV projects. Stay up-to-date with the latest advancements in PV technology and industry best practices. Required Skills/Abilities Proficiency in AutoCAD, Helioscope, & PVsyst for electrical distribution and PV system layout. Familiarity with California Electrical Code and other relevant codes and standards. Strong problem-solving skills with an analytical approach to electrical system design. Knowledge of PV system components and distribution equipment. Ability to manage multiple projects and deadlines in a dynamic team environment. Effective verbal and written communication skills to collaborate across teams. Contribute to a team environment where your input is valued. Education and Experience Bachelor's degree in Electrical Engineering or a related field (preferred), or equivalent relevant experience. 1-2 years of experience of electrical design for a design-build electrical contractor or engineering firm. Proficiency in AutoCAD MEP. Revit is appreciated. Basic knowledge of Microsoft Office applications. Strong time management, communication, and interpersonal skills. FE (EIT certification) appreciated. LEED project experience appreciated. Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

About Us: We are one of the biggest Data Center contractors in North America, and we are looking for a new Design Engineer in AR. As a business we turn over $500M a year working across North America & Europe, working on huge data center projects valuing billions of dollars for Google, Meta, Amazon and more! We are part of a larger group that turns over $8B a year - we are looking for someone experienced with AutoCAD, SolidWorks & Revit to join our business and start a full time career full of progression and career opportunities with one of the biggest construction groups globally. Basic Purpose of the role: The Product Development Engineer administers new product creation, engineering changes, and qualification processes for data center products, bills of material, and labor routings for all new products and product changes via prototyping and actual manufacturing process performance analysis. They develop quotations for non-standard and new product pricing requests. The Product Development Engineer also maintains engineering drawings, specifications, and quality procedure documentation. Responsibilities: Develops processes for new families of products with production, purchasing, quality, and operations teams. Proactively accounts for potential changes to designs and future-proofs where possible. Creates quotes for new design and maintains design history throughout quoting process. Maintains engineering drawings and specifications. Administers processes for new part number creation, bills of material/labor changes, and new product quote requests but not information related to MI%. Interprets project needs from customer, project manager, or architectural drawings and communicates feasibility, lead times, and potential challenges. Creates project submittal documents for approval of project design and details. Supports manufacturing team with new process development. Maintains awareness of individual contribution to and impact of the quality, safety, environmental, and product compliance policies and activities; reports all quality issues, unsafe acts, and unsafe conditions to the proper personnel. Qualifications: Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering is required. Zero to three years of experience in a manufacturing environment. Proficiency with 2D and 3D CAD systems is required. Project Management experience is a plus. Previous experience with engineering drawing standards and practices, new product development, manufacturing processes and controls a plus. Must be proficient with Solidworks. AutoCAD and Revit experience a plus, particularly BIM modeling. Must have strong attention to detail. Proficient with Microsoft Office 365 (Word, Excel, Teams, etc.) applications and computer technology. Excellent verbal and written communication skills. Exceptional organizational and time-management skills. Works well in a fast-paced environment. Adaptable to changing project requirements.

About Us PAR Western Line Contractors, LLC (dba QUES), a subsidiary of Quanta Services, Inc. (NYSE: PWR), is composed of some of the most highly qualified professionals experienced in all aspects of engineering, designing, asset management, and construction management for the electric utility and other industries. We are a highly mobile and flexible team with the ability to service every area and region within our customers' area of operation. With over 700 employees and growing, we have thousands of years of combined electrical utility experience to draw from when committing to provide our clients with a wide range of utility services. About this Role QUES (PAR Western Line Contractors LLC dba) safely provides engineering, procurement and construction services for comprehensive infrastructure needs in the electric power, oil, and natural gas industries. QUES has the knowledge and expertise to handle a full spectrum of projects. From the most straightforward, single-component installation to the most complex, multi-state project, QUES handles the job safely, efficiently, and cost-effectively. We are seeking a detail-oriented and experienced Drafter with a strong background in base mapping and Southern California Edison (SCE) drafting standards. The ideal candidate will be proficient in GeoView, possess a solid understanding of utility mapping, and be capable of producing high-quality drafting deliverables that support engineering and infrastructure projects. QUES offers a professional work environment, excellent benefits, competitive pay, and potential growth. What You'll Do Utilize survey data to develop precise base maps for utility and infrastructure planning. Draft city infrastructure elements including streetlights, sewer lines, storm drains, curbs, gutters, and other public assets. Apply SCE-specific drafting standards across various base mapping projects. Committed to maintaining up-to-date knowledge of evolving SCE drafting guidelines and procedures. Create Single Lines, vicinity maps, index sheet, and viewports Tie down structures (station and dimension all Edison Structures to proper standards) Utilizes AutoCAD /AUD to create Base maps from Survey and GeoView. Implementing city utilities such as water, storm drain, sewer, and any other utilities that are in the project area using city as-builts provided by our Look-Up Department Following up on city utilities request form our Look-Up department Re-drawing Edison Underground ducts and cables in AUD using GeoViews offsets and dimensions. Maintain and organize digital files and documentation in accordance with company and client protocols. Perform quality checks to ensure compliance with drafting standards and project requirements. Collaborate with engineers, project managers, and field teams to ensure accurate and timely drafting deliverables. Work a regular 40‐hour workweek, with overtime as required. Work on multiple projects simultaneously and submit deliverables on time. What You'll Bring Basic knowledge and ability to utilize AutoCAD and AUD software. Ability to accurately interpret underground utility layouts, including SCE cable and duct runs. Experience reading overhead electrical system callouts and integrating them into drafting deliverables. Ability to code routines within AutoCAD Knowledge of general civil drafting practices Ability to read and understand City As-Builts and civil maps Ability to utilize online maps to gather information. Proficiency in GeoView, AutoCAD, and GIS platforms. Able to learn quickly and change focus when needed. Ability to multi‐task, with good organizational, planning and communications skills. Proficient computer skills required. A minimum of 5+ years of professional experience in design and estimation, or an engineering degree or a Cal Poly Planner Certification, is highly preferred. Ability to interpret technical drawings. Has a broad knowledge of engineering principles, construction standards, and industry practices. Must have a positive attitude and an exemplary work ethic. Excellent communication, interpersonal, and leadership skills, with the ability to collaborate effectively with internal teams. Ability to work independently, manage multiple tasks, and determine priorities in a complex environment. Applicants who do not meet all qualifications may still be considered for alternate designer positions based on skill level and potential. What You'll Get Health Insurance: Medical, Dental, Vision Plans, Critical Illness, Hospital Indemnity, Accident Flexible Spending Accounts/Health Savings Accounts PWR Discounts (Flight Tickets, Amusement Park Tickets, Nike) Group Discount (Pet Insurance, Auto Insurance, Home Insurance) Retirement Savings Plan (401K) with company matching Short & Long Term Disability Supplemental Life and AD&D Insurance Paid Holidays and Vacation Compensation Range The anticipated compensation for this position is USD $24.00/Hr. - depending on experience and qualifications. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Full-time Description Objective Mack Industries is looking for a Precast Concrete Drafter to assist in the technical efforts necessary to support our sales, production, and product development departments. The main focus of this position will be to develop detailed shop drawings of precast concrete products and preparing bid submittal packages for customers. Paid Weekly Essential Functions Prepare project shop drawings to present to the customer for approval Completes submittals for customer approval Engages directly with customers to ensure specifications and lead time are met Works alongside sales and production teams contributing efforts where needed Maintains project flow, following targets as established by the Engineering Manager Communicates effectively with General Contractors, Field Personnel, Architects, Engineers and other departments to facilitate project outcomes and competition Utilizes Stack IT, AutoCAD, and 3-D software to create detailed shop drawings for fabrication Utilizes ERP Software to import orders, enter order lines. Requirements Minimum Qualifications Associates or Bachelor's degree in Civil Engineering Technology or related field preferred Knowledge in precast manufacturing and construction processes a plus Construction experience a plus Proficient in AutoCAD Proficient in Microsoft Office Applications (Excel, PowerPoint, Word, Outlook, etc) Strong written and verbal communication skills Strong mathematics and science abilities a plus Valid driver's license with a clean driving record Behavioral Traits Willingness to work collaboratively within a team Customer focused, attentive and responsive. Proactive and independent with the ability to take initiative Shows good judgement in difficult situations Organized with attention to detail Shows accountability for efforts and results Environment Conditions and Physical Strain Due to the nature of the operation, the levels of noise, dust and dirt can be high. Must be able to lift up to 50 lbs., on occasion Must be able to stand for extended periods of time Must be able to squat, crawl, climb and kneel to complete tasks This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change, or new ones may be assigned at any time with or without notice. Mack Industries, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

Since 1989, IDEC, a division of Delaware Elevator, has been manufacturing and fabricating elevators for residential and commercial clients across the United States. Our specialization in both standard and custom elevator cabs, doors, entrances and interiors makes us the smart choice for any building, including condos, hotels, retail stores, clubhouses and more. IDEC is committed is to providing responsive service tailored to meet the individual needs of their valued customers. IDEC can confidently affirm that they are large enough to solve your problems and small enough to provide personal care. IDEC welcomes the opportunity to work with you. We have an immediate need for an CAD 3D Drafter to join our Team! Essential Functions: * Develop detailed 3D shop fabrication drawings based on specifications and design requirements for custom elevators. * Collaborate with engineers and project team members to refine and validate designs. * Ensure all drawings adhere to industry standards and company guidelines by reading and understanding job release information. * Create comprehensive shop blueprints for manufacturing and perform thorough checklists prior to blueprint release. * Process material buyout requests for jobs and troubleshoot manufacturing issues related to shop prints. * Conduct quality checks on drawings to ensure accuracy and completeness. * Assist in producing additional custom drawings to support project needs. * Maintain project timelines and ensure drafting deliverables are completed on schedule. Qualifications: * High school diploma required; additional training or certifications in drafting or a related field is a plus. * AutoCAD experience is required. * Autodesk Inventor experience highly preferred. * Proficient in Microsoft Office (Excel, Word, Outlook). Skills & Abilities: * Strong understanding of technical drawings and specifications. * Exceptional organizational skills with high attention to detail. * Ability to manage multiple priorities and consistently meet deadlines. * Reliable attendance and excellent communication skills, with the capacity to interact with both internal teams (Project Coordinator, Engineering Manager) and occasional customer contacts. * High-level CAD drafting proficiency; Autodesk Inventor experience is highly preferred. * Proficient in 3D modeling. * Familiarity with sheet metal fabrication is a plus. * Ability to work independently as well as collaboratively within a team environment. Why Join Us? In return for your expertise, IDEC offers an excellent benefits package, including: * Medical, Dental & Vision: 100% paid for employees, 50% for dependents. * Retirement: 401(k) plans. * Insurance & Wellness: Disability, life insurance, AFLAC, and wellness programs. * Perks: Member discounts, paid vacations, and holidays. * Opportunities for professional growth and advancement within our supportive IDEC Team. Affirmative action, equal opportunity employer #LI-JS1

FLSA Classification: Non-Exempt Job Summary: We are seeking a detail-oriented and skilled Designer/Drafter to join our engineering team. The ideal candidate will be responsible for creating detailed technical drawings and designs based on specifications and requirements. This role requires strong technical skills, excellent attention to detail, and the ability to work collaboratively with engineers and other team members. Key Responsibilities: Technical Drawings: Create detailed technical drawings and designs using CAD software based on specifications and requirements. Design Modifications: Make modifications to existing designs as needed, ensuring accuracy and compliance with standards. Collaboration: Work closely with engineers and other team members to understand project requirements and provide design solutions. Documentation: Maintain organized and accurate records of all drawings and design documents. Quality Control: Review and verify the accuracy of drawings and designs, ensuring they meet quality standards and specifications. Project Support: Assist with project planning and coordination, providing technical support as needed. Standards Compliance: Ensure all designs comply with industry standards, codes, and regulations. Continuous Improvement: Identify opportunities for process improvements and implement changes to enhance efficiency and effectiveness. Other Duties: Perform other design and drafting-related tasks as assigned by the supervisor. Qualifications: Associate's degree in Drafting, Engineering Technology, or a related field; Bachelor's degree preferred. Proven experience in drafting and design, preferably in an engineering or manufacturing environment. Proficiency in CAD software (e.g., AutoCAD, SolidWorks) and other design tools. Strong attention to detail and accuracy. Excellent organizational and time management skills. Ability to work independently and as part of a team. Strong communication and interpersonal skills. Knowledge of industry standards, codes, and regulations. Benefits: Competitive hourly wage. Comprehensive health, dental, and vision insurance. Paid time off and holidays. Opportunities for professional development and career advancement. Supportive and collaborative work environment. Equal Employment Opportunity Statement: Real Acoustix is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job DescriptionDescription: DC Engineering is looking for drafters and designers to join our team! This role is ideal for individuals who have formal training in drafting or engineering technology, as well as those with work experience only. If you have a passion for technical drawing and design, we encourage you to apply! General job duties include engineering drafting and design utilizing Revit and AutoCAD drafting software for a variety of projects. Key Responsibilities: Prepare and revise engineering drawings using AutoCAD and/or Revit. Work closely with engineers and project managers to ensure designs meet technical specifications and project requirements. Interpret sketches, redlines, and technical notes to produce accurate and complete drawings. Maintain organized records of drawings, revisions, and documentation. Assist in updating and maintaining drawing standards and templates. Support engineering and production teams with drafting-related tasks as needed. Requirements: We welcome candidates with any of the following backgrounds to apply: Formal training in drafting, engineering technology, or a related field (certificate, diploma, or degree). On-the-job experience in engineering drafting. A combination of education and experience. Preferred Skills: Proficiency in AutoCAD and/or Revit. Proficiency in Microsoft office software, PDFs, Bluebeam and general computer experience. Strong attention to detail and accuracy. Good communication and teamwork skills. Basic understanding of engineering principles and processes. Ability to adapt to new situations and changes with a positive, customer-focused attitude Ability to help develop and meet project design goals as defined by supervisor.

Barry Isett & Associates (Isett) is an employee-owned multi-discipline engineering/consulting firm headquartered in Allentown, PA, with additional offices throughout eastern and central PA. Isett associates get the opportunity to perform meaningful work that helps enrich our community each and every day. Our company is a values-based organization which has been recognized for its award-winning culture through several regional and statewide programs: Best Places to Work in PA (annually since 2019) The Morning Call's Top Workplaces (annually, since 2013) Empowering Women Award by Central Penn Business Journal and Lehigh Valley Business (2023) Philadelphia Inquirer's Top Workplaces (annually since 2022) Corporate Citizen of the Year (by the Lehigh Valley Business Journal) The Societas Award for Responsible Corporate Conduct (for Ethics). Benefits Career advancement and continuing education opportunities Employee engagement events and parties Work-life balance & flexible working schedules Paid vacation/holiday/sick time Employee Stock Ownership Plan (ESOP) Medical, dental, vision, life, and disability insurances Discounted and/or free Isett wear Parental leave 401k/Roth match As a multi-discipline firm, Isett provides a full range of engineering and consulting services, including civil, structural, mechanical, electrical, plumbing, environmental, geotechnical, and municipal engineering, surveying, landscape architecture, code enforcement, plan review, construction management, construction materials testing, and grant writing services to clients throughout the Mid-Atlantic region. We have an opportunity for a Designer/Drafter to assist our Civil/Land Development Department in our Lehigh Valley office in Allentown, PA. Our civil/land development designers work on various project types including commercial land developments; institutional land developments (i.e., schools); residential subdivisions, industrial developments, and commercial projects. Because our employees are usually involved in several projects at one time, involving numerous team members (such as project manager, engineer, and CADD technician/designer), exceptional communications skills and the ability to work well with others is essential. Designers/Drafters are expected to be responsible for the creation, production and completion of the entire drawing set of site development plans. Responsibilities: Learn and maintain the drafting standards as established by the Design Staff Supervisor. Maintenance and storage of drawing files for active projects on servers. Work closely with project team via computer-aided design (Civil3d) to transform initial rough product designs into working documents. Follow established technical specifications to prepare drawings and assists in design drafting. This may include the design of plans, elevations/sections, and details Consult with project team and engineers regarding model accuracy, design, and drafting standards. Review engineering drawings and designs to ensure adherence to established specifications and standards. Coordinate/back-check drawing sets to ensure information is correct. Assist in the preparation of land development plans and correspondence with the project team, including design aspects such as site layout, grading, utility design. Stay current with the latest developments in CAD (Civil3d), with assistance of the Department Manager and Design Staff Supervisor. Requirements Basic understanding of AutoCAD using Civil3d. Technical degree in drafting or related course work. Design experience a plus. Ability to work as part of a team. Strong communications skills. Ability to work in office. Working at Isett Isett offers a collaborative, team-based work environment with great potential for personal and professional growth. Our comprehensive benefits package includes medical, dental, vision, life and disability insurances, 401k, Employee Stock Ownership Plan, vacation/holiday/sick pay, supplemental insurances, and flexible working schedules in a professional, yet relaxed environment. Isett is an EOE.

We are Lennar Lennar is one of the nation's leading homebuilders, dedicated to making an impact and creating an extraordinary experience for their Homeowners, Communities, and Associates by building quality homes and providing exceptional customer service, giving back to the communities in which we work and live in, and fostering a culture of opportunity and growth for our Associates throughout their career. Lennar has been recognized as a Fortune 500 company and consistently ranked among the top homebuilders in the United States. Join a Company that Empowers you to Build your Future Lennar is seeking a CAD Drafter to be responsible for production and maintenance of residential working drawings using AutoCAD and Revit software platforms. Applicant must be skilled in AutoCAD and Revit software and have a working knowledge of Single Family and Multi Family Residential construction. * A career with purpose. * A career built on making dreams come true. * A career built on building zero defect homes, cost management, and adherence to schedules. Your Responsibilities on the Team * Using AutoCAD, must be able to produce and maintain multiple projects at one time. * Maximize team productivity and deliver professional integrity. * May be asked to review and approve the work of third-party design consultants. * Present work in a manner to ensure satisfaction or make revisions as necessary. * Knowledge in all of the field's concepts, practices and procedures. * Perform a variety of tasks and offer extensive problem-solving skill-set. * Ensure architectural work is completed on time. * Maintain CAD standards and specifications. * Knowledge of code compliance in all jurisdictions; city, county, state, international. * Prepare CAD drawing for submittals, permit approvals, field change orders, construction documents. * File management. * Perform all other duties as assigned. Requirements * Minimum Two (2) years of experience in drafting/design for high-volume production homebuilding operation. * Two(2) - four(4) years AutoCAD (or higher) experience in Architectural discipline preferred. * Associate's degree or higher in Architecture, Drafting/Design or related discipline * Valid driver's license * Intermediate to advanced computer skills - Microsoft Word and Excel * Must be able to perform accurate, consistent and detail-oriented work with simultaneously deadlines * Must be highly motivated * Must be able to handle constructive feedback and work in a team environment Life at Lennar At Lennar, we are committed to fostering a supportive and enriching environment for our Associates, offering a comprehensive array of benefits designed to enhance their well-being and professional growth. Our Associates have access to robust health insurance plans, including Medical, Dental, and Vision coverage, ensuring their health needs are well taken care of. Our 401(k) Retirement Plan, complete with a $1 for $1 Company Match up to 5%, helps secure their financial future, while Paid Parental Leave and an Associate Assistance Plan provide essential support during life's critical moments. To further support our Associates, we provide an Education Assistance Program and up to $30,000 in Adoption Assistance, underscoring our commitment to their diverse needs and aspirations. From the moment of hire, they can enjoy up to three weeks of vacation annually, alongside generous Holiday, Sick Leave, and Personal Day policies. Additionally, we offer a New Hire Referral Bonus Program, significant Home Purchase Discounts, and unique opportunities such as the Everyone's Included Day. At Lennar, we believe in investing in our Associates, empowering them to thrive both personally and professionally. Lennar Associates will have access to these benefits as outlined by Lennar's policies and applicable plan terms. Visit Lennartotalrewards.com to view our suite of benefits. Join the fun and follow us on social media to see what's happening at our company, and don't forget to connect with us on Lennar: Overview | LinkedIn for the latest job opportunities. Lennar is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws.

Application Engineer CAD Application Engineer From start-ups to blue-chips, Saratech (saratech.com) helps companies engineer and manufacture complex products. Saratech is a leading engineering Siemens software partner, but first and foremost an engineering services firm renowned for driving innovation across various industries. We specialize in developing cutting-edge solutions that transform the way products are designed, produced, and supported. Our PLM technologies help businesses streamline their operations, from concept to retirement, ensuring efficiency, quality, and sustainability. We have experience in helping companies with digital thread enablement through a complete digital twin. Our team works with some of the best companies in multiple sectors industries including aerospace, space launch, defense, automotive, and industrial machinery. Job Description: We are seeking highly skilled and motivated CAD Application Engineers to join our dynamic team. The ideal candidate will have advanced experience with Siemens NX CAD software presales and post-sales support, be personable and a natural helper with a customer service minded philosophy, thrive in a fast-paced and learning-intensive environment, get a rush from solving challenging problems that other people cannot, and deliver solutions graciously over the phone or in person. Comfortable working autonomously, the candidate wants to see the team succeed and gets satisfaction from knowing that he or she played a critical role. The training, the application engineer will have the opportunity to contribute to services projects especially around data migration and NX automation. Key Responsibilities: Provide technical expertise and support for PLM products, including troubleshooting and resolving issues with PLM and network and software/hardware performance issues Provide higher-level technical support to extend our customers' abilities to apply Teamcenter solutions to meet design challenges Perform pre/post sales customer support including software demonstrations Implement, configure, and customize Teamcenter PLM software to meet business requirements Work closely with clients to analyze their current processes, identify areas for improvement, and integrate PLM solutions effectively Develop user training materials and conduct training sessions to enhance the adoption of PLM tools Develop a foundational knowledge of the standards and regulatory requirements which affect the design and manufacture of products Contribute to future software releases by prioritizing known product defects and communicate customer feedback to Siemens' product development teams Collaborate with cross-functional teams to ensure the successful deployment of PLM strategies Keep up to date with the latest industry trends, technologies, and best practices in PLM Contribute to the continuous enhancement of our PLM offerings based on customer feedback Gain further knowledge of CAD/CAM/CAE/PLM solutions and market needs Qualifications: Bachelor's or master's degree in engineering A desire to work in the product lifecycle management field focusing on Siemens' Teamcenter Strong understanding of engineering processes and product development cycles Experience with engineering tools like CAD, CAM, CAE, PLM Proficient in one or more programming or scripting languages Exceptional problem-solving abilities and analytical skills Excellent communication and interpersonal skills to effectively interact with clients and team members Project management experience is a plus US Citizen for ITAR related work What We Offer: Competitive salary and benefits package Dynamic and inclusive work environment Opportunities for professional growth and career advancement Exposure to the latest technologies and innovative projects Flexible working arrangements to balance your work and personal life A supportive culture that values diversity, equity, and inclusion How to Apply: Please submit your resume through our online application. At Saratech, we believe in harnessing the power of diverse talent to revolutionize the engineering sector. Join us and be a part of a team that's shaping the future of product lifecycle management. Benefits Insurance: All full-time regular employees (and dependents) are eligible to get medical, dental, vision coverage. Employees also can buy up on benefits like FSA, HSA, Life insurance, long and short-term disability. Retirement Plan: All employees can enroll in the company's 401k with company matching. Paid Time Off: All full-time regular exempt employees are eligible for our Discretionary Time Off vacation policy after 90 days from their start date, Discretionary Time Off plan is a non-accrual plan for employees. All full-time regular non-exempt employees are eligible for our Paid Time Off Plan policy after 90 days, Paid Time Off plan is an 3.33 hours accrual per pay period for employees. Paid Holidays: All full-time employees will receive 8 paid holidays per year. Full-time non-exempt employees receive an extra floater holiday per year. Paid Sick time: All full-time employees will receive 32 sick hours per year. Part time employees will receive 24 hours or minimum sick time required by the state. NOTE TO STAFFING AGENCIES AND RECRUITERS: Saratech does not accept unsolicited resumes from any external agency for the placement of any position. Unsolicited resumes submitted by agencies and received by Saratech will be considered the property of Saratech and may be contacted and engaged with directly by Saratech. Saratech will not pay a placement fee or any other fees to any third-party agency, firm or recruiter who is not specifically retained with a signed fee agreement by Saratech Human Resources to conduct a candidate search. Please do not forward unsolicited resumes to our website or to any Saratech employee. Saratech will not be responsible for any fees associated with unsolicited resumes. EQUAL EMPLOYMENT OPPORTUNITY NOTICE: Paydarfar Industries, Inc. dba Saratech is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. SALARY Range 90-130K