Facilities Maintenance Mechanic jobs at Suncoast Post-Tension

The Installation Assistant will support the Installation Specialist in the installation and anchoring of modular buildings and mobile trailers at customer locations. When not assisting the Installation Specialist, the Installation Assistant will perform duties as a Yard Technician, ensuring the units are maintained according to company standards. Essential Duties and Responsibilities:Installation Tasks: Assist in the installation and anchoring of modular buildings and mobile trailers at customer locations. Assist in the retrieval of modular buildings and mobile trailers from customer locations to the yard. Assist in installation of skirting, steps, and VAPs at customer locations. Assist in safety protocols for CDL drivers. Assist in ensuring trucks are properly loaded. Operate hand and power tools safely. Serve as a spotter for CDL driver on job sites. Interface with customers at job sites. Yard Technician Tasks: Clean all units, including washing and waxing flooring. Replace and install floor tile. Replace and install windows and doors. Replace and install exterior siding and other building components. Paint all portions of units to specifications. Remove and replace walls. Remove and replace lighting, plumbing and electrical. Perform light carpentry work/repair on customer job site. Operate company toter as needed to maneuver trailers in yard. Required Skills and Qualifications: Light carpentry and electrical experience. Basic mechanical skills to work on trucks. Good organizational skills. Demonstrated knowledge and skills. Ability to operate company service vehicles. Ability to pass DOT medical exam. Physical/Mental Demands: Ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion, and grip strength. Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Wears personnel protective equipment as required. Work Environment and Safety: Employee will work in a variety of environments including garage, work yard, in-town driving, highway/freeway driving, construction site locations, etc. Must be able to perform tasks in all conditions including wet, humid, and dry. Will be working in outside weather conditions and will have exposure to common maintenance hazards. Must maintain a professional, responsible, and accountable attitude and perform tasks in a timely manner. Required ability to maintain a safe and healthy working environment taking responsibility for any necessary precautions to protect themselves, the company, other employees, and the vendors to avoid any injury and health hazard. Must immediately report all incidents to supervisors. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy. A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments. Hourly Rate: $33.30, $2 night shift differential Shift: Night shift, 5:45pm-6:00am rotating schedule At the Johns Manville Scottsboro, AL facility, we manufacture reinforced TPO roof membrane and accessories. We take pride in our innovative process and our commitment to excellence. Here, our PEOPLE are at the core of everything we do, our PASSION drives us to go the extra mile, we PERFORM at a superior level, and we PROTECT today to ensure tomorrow. Position Overview: As a Multi-Craft Electrical/Maintenance Technician, you'll play a crucial role in maintaining and enhancing our production and facility equipment, ensuring we continue to deliver top-quality TPO roofing materials. This role is integral to achieving our safety, productivity, and uptime goals while embodying our core values and delivering the JM experience. Your Day-to-Day: Follow Job Safety Analysis (JSA's), employ safe work practices, and report hazardous conditions. Perform both routine and complex maintenance activities on mechanical and electrical systems. Install and repair electrical conduit and cable, ensuring proper connections and grounding. Utilize schematics for troubleshooting or installing equipment. Conduct electrical measurements and use common shop tools for various maintenance tasks. Inspect equipment, report defects, and perform preventative maintenance. Troubleshoot and repair production and facility equipment to maintain optimal operations. Track and manage work orders using SAP maintenance modules. What You Bring to the Team: High school diploma or equivalent 2-5 years of electrical/maintenance experience in a manufacturing or similar environment Strong skills in troubleshooting, wiring, and installing industrial electrical equipment Proven mechanical troubleshooting, installation, and repair abilities Preferred Requirements: Associate degree in a related technical area Expertise in PLCs, HMIs, and associated hardware Knowledge of 24V - 480V AC/DC electrical power and control systems, VFDs, and PLC systems Physical Requirements: Ability to work in typical manufacturing conditions with exposure to varying environmental factors. Capacity to work 12-hour shifts and lift up to 50 pounds as needed. Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team. Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees. Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs. Diversity & Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Road Mechanic US-PA-Hummelstown Job ID: 2023-2081 Type: Regular Full-Time # of Openings: 1 Category: Maintenance Harrisburg Division Overview The Materials Division of H&K Group, Inc. is looking for a Road Mechanic to repair and maintain diesel and gasoline heavy equipment and trucks in the field, based out of our Harrisburg Division in Hummelstown, PA. The ideal candidate is energetic, self-motivated, organized, competent, and professional. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Company vehicle Responsibilities Essential Duties and Responsibilities Perform all work adhering to OSHA, PA and DoT regulations, and H&K Safety policies Reviews job orders and observes and listens to equipment in operators/truck drivers/shop leaders to determine malfunction and to plan work procedures. Identify parts for repairs or replacement for all systems on equipment/trucks when needed. Examines protective guards, loose bolts and specified safety devices on equipment/trucks and makes adjustments. Dismantles equipment/trucks to examine parts for defect or to remove defective part. Replaces defective part with new part or repairs or reproduces part from various kinds of metal. Assembles and test operates machine or test drive trucks to verify correction of malfunction and to confirm that it meets manufactures specifications. Overhauls gas or diesel engines. Performs diagnostics through the use of computers and carious equipment. Performs front end inspection and alignments. Other duties as assigned Qualifications Required Skills, Education, and Experience High school diploma or equivalent (such as the GED) from an accredited educational institution OR relevant experience and/or training CDL B Clean driving record Customer Service and Teamwork General computer knowledge as well as caterpillar software (ET &SIS) Ability to use mechanics hand tools, torch, and welder Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience Related experience and/or training High school diploma or equivalent (such as the GED) from an accredited educational institution Technical school or college in the heavy equipment field Experience working in heavy civil construction, road construction, or quarries CDL A OSHA, MSHA, or other relevant safety certifications Physical Demands Occasionally required to Stand, walk, or sit Climb, balance, stoop, kneel, crouch or crawl Drive up to two hours Use hands to finger or feel Talk and hear Lift and/or move up to 75 pounds Work Environment Occasional exposure to Moving parts Fumes and airborne particles Noise level is loud at times At times required to work outdoors in all environments Hours regularly exceed 40 hours a week and 8 hours a day The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Pre-employment Physical 100% Company-Paid Health Benefits! PI3a1439d3fb3a-37***********3

Transco Railcar Repair As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Fits mechanical parts and subassemblies into different types of machinery and products. Conducts measures of products and adjusts them. Responsible for upkeep of workstation. Works according to established trade and shop practices. Typically has 0-2 years of experience and works under close supervision.Who We Are:Transco Railway Products, Inc. has been the leader in providing railcar maintenance and services to the railcar industry. We have earned the reputation for honesty, integrity, and superior quality which has allowed us to establish a committed customer base. Transco is part of Marmon - a strong, growing, global organization that consists of more than 100 autonomous manufacturing and service companies. Job Description: We are looking for a Valve Technician to provide construction, repair, and support of our products. This position requires someone willing to learn a new trade through on-the-job training. Wage: $24.75/hr Job Requirements: Disassembles and assemble fittings on tank cars. Test, rebuild and test valve to reveal possible defects. Maintain work area in a neat and orderly manner and report potential hazards. Lift up to 50 pounds as needed and perform tasks that require climbing and balancing on ladders and platforms. Able to pass drug screen and physical. What We Offer: Transco strives to be the Employer of Choice. Our generous benefits package includes: Benefits on Day 1 Medical/Dental/Vision with first in class vendors Health Savings Account Flexible Spending Account (Medical and Dependent Care) Company Paid Benefits: Short Term Disability, Long Term Disability, Life Insurance Employee Assistance Program 4 weeks of Paid Parental Leave Vacation Benefits 401k with generous company match and additional employer annual contribution Don't worry if you think that you do not meet all the qualifications. The tools, technology, and methodologies we use are constantly changing and we value talent and interest over specific experience.It is the policy of Transco to provide equal employment opportunities to all qualified persons, and to recruit, hire, train, promote, and compensate persons in all job without regard to race, color, religion, sex, national origin, disability, or sexual orientation, gender identify, protected veteran status or any other protected characteristic protected by the law. #LI-DNI Pay Range: 22.28 - 27.23 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Reporting to the Associate Director- Architectural Trades & Auto Services, the Facilities Maintenance Mechanic, assigned to the Carpentry Shop within the Maintenance & Operations unit of Facilities Development & Operations, works independently or as a team member under the general supervision of the Facilities Project Supervisor. The Facilities Maintenance Mechanic performs the full range of skilled journey level carpentry and metalworking trades along with strong skills in other trade areas to perform a variety of skilled preventive and general maintenance, repair, construction and renovation work on building and infrastructure systems. Typically, carpentry and metal work skills are utilized to maintain and repair equipment and systems associated with university buildings and infrastructure to ensure a clean, safe and attractive campus/learning environment. The incumbent uses a computerized maintenance system to ensure the preventive maintenance program objectives are met and provides safety instructions and directions to unskilled or semi-skilled assistants. Key Responsibilities Performs at a journey level in at least one trade and assists with basic and advanced level maintenance and repair work for various trades including carpentry, metal work, plumbing, mechanical, and electrical Build, remodel, and maintain various types of facilities, buildings, offices, classrooms, restrooms, sheds, fences and other structures interpret and work from blueprints, plans, drawings, and specifications including making rough sketches where needed to facilitate work efforts Perform routine mechanical maintenance Respond to service requests; diagnose problems and make necessary adjustments Operate hand/power tools and certified equipment such as scissor lifts, forklifts, utility carts, and welding equipment Use computerized maintenance management programs to complete work assignments including documentation of efforts but also as necessary to research and understand issues at hand Estimates cost, time and materials of maintenance, repair and renovation work Responds to urgent and/or emergency calls in order to prevent catastrophic equipment failure, injury, damage or further incident, takes appropriate action to mitigate damages and facilitate appropriate repair Knowledge, Skills & Abilities Ability to lift, carry, push, or pull up to 50 pounds occasionally Ability to sustain exposure to dusty, noisy environments and inclement weather as necessary to carry out assigned duties and responsibilities Ability to climb to a height in excess of thirty feet Thorough knowledge of the methods, materials, equipment and tools used in one of the skilled trades associated with the plumbing, mechanical, electrical, or HVAC & System Controls trades Working knowledge of applicable building and safety codes and regulations related to facilities, systems including building and system level utilities and infrastructure, and renovations Ability to demonstrate journey-level skill in one of the skilled trades and strong skills in other applicable trades Ability to read, interpret and work from blueprints, plans, drawings and specifications Ability to make rough sketches and to estimate the cost, time and materials of assigned work Ability to analyze and respond appropriately to emergency situations Ability to operate all applicable tools, equipment and systems necessary to perform skilled trade Working knowledge of computerized maintenance and building automation systems Ability to organize assigned work and carry forward assignments based on operational priorities as defined by the appropriate administrator and/or operating guidelines with a focus on efficiently performing duties required to complete assignments successfully and within given deadlines Ability to communicate effectively and work harmoniously with a diverse group of individuals throughout the organization as well as those outside of the organization who are directly or indirectly involved with projects and/or assignments Required Qualifications Four years of increasingly responsible experience leading to journey-level skills in facility repair and maintenance, or any reasonable equivalent combination of training and experience as a facilities maintenance mechanic which demonstrates the achievement of journey-level skills equivalent to that acquired through completion of an applicable apprenticeship program Requires the possession of a valid California Driver's License for the operation of any vehicle or equipment required for position and in any emergency situation Must participate in all OSHA required physicals and examinations License A valid driver's license is required for this position. Out of state candidates selected for the position must obtain a State of California driver's license within 10 days of hire in accordance with the California Department of Motor Vehicles regulations. Once hired the employee must successfully complete the Defensive Driver Training Program provided by the State of California for California State University campuses. Preferred Qualifications Certification indicating completion of an applicable apprenticeship program Journey level standing in the carpentry and/or metal working trades Knowledge of welding and fabrication techniques commonly used in a maintenance and repair setting Five years of journey level work experience in the maintenance, repair, or construction/fabrication, and installation of carpentry or metal work systems associated with buildings and grounds Compensation Classification: Facilities Maintenance Mechanic Anticipated Hiring Range: $6,274/month - $6,528/month CSU Salary Range: $5,355/month - $7,801/month San José State University offers employees a comprehensive benefits package typically worth 30-35% of your base salary. For more information on programs available, please see the Employee Benefits Summary. Application Procedure Click Apply Now to complete the SJSU Online Employment Application and attach the following documents: Resume Letter of Interest All applicants must apply within the specified application period: June 12, 2025, through June 29, 2025. This position is open until filled; however, applications received after screening has begun will be considered at the discretion of the university. Work Schedule Tuesday - Sunday, 7:30 a.m. to 4:00 p.m. Contact Information University Personnel ************* ************ CSU Vaccination Policy The CSU strongly recommends that all individuals who access any in-person program or activity (on- or off-campus) operated or controlled by the University follow COVID-19 vaccine recommendations adopted by the U.S. Centers for Disease Control and Prevention (CDC) and the California Department of Public Health (CDPH) applicable to their age, medical condition, and other relevant indications and comply with other safety measures established by each campus. The system wide policy can be found at ****************************************************** and questions may be sent to *************. Additional Information Satisfactory completion of a background check (including a criminal records check) is required for employment. SJSU will issue a contingent offer of employment to the selected candidate, which may be rescinded if the background check reveals disqualifying information, and/or it is discovered that the candidate knowingly withheld or falsified information. Failure to satisfactorily complete the background check may affect the continued employment of a current CSU employee who was offered the position on a contingent basis. The standard background check includes: criminal check, employment and education verification. Depending on the position, a motor vehicle and/or credit check may be required. All background checks are conducted through the university's third party vendor, Accurate Background. Some positions may also require fingerprinting. SJSU will pay all costs associated with this procedure. Evidence of required degree(s) or certification(s) will be required at time of hire. SJSU IS NOT A SPONSORING AGENCY FOR STAFF OR MANAGEMENT POSITIONS. (e.g. H1-B VISAS) All San José State University employees are considered mandated reporters under the California Child Abuse and Neglect Reporting Act and are required to comply with the requirements set forth in CSU Executive Order 1083 as a condition of employment. Incumbent is also required to promptly report any knowledge of a possible Title IX related incident to the Title IX Office or report any discrimination, harassment, and/or retaliation to the Office of Equal Opportunity. Jeanne Clery Disclosure of Campus Security Policy and Crime Statistics Act and Campus Housing Fire Safety Notification: Pursuant to the Jeanne Clery Disclosure of Campus Security Policy and Campus Crime Statistics Act, the Annual Security Report (ASR) is also now available for viewing at **************************************************************** The ASR contains the current security and safety-related policy statements, emergency preparedness and evacuation information, crime prevention and Sexual Assault prevention information, and information about drug and alcohol prevention programming. The ASR also contains statistics of Clery crimes for San José State University locations for the three most recent calendar years. A paper copy of the ASR is available upon request by contacting the Office of the Clery Director by phone at ************ or by email at ************************. Pursuant to the Higher Education Opportunity Act, the Annual Fire Safety Report (AFSR) is also available for viewing at ******************************************************************* The purpose of this report is to disclose statistics for fires that occurred within SJSU on-campus housing facilities for the three most recent calendar years, and to distribute fire safety policies and procedures intended to promote safety on Campus. A paper copy of the AFSR is available upon request by contacting the Housing Office by phone at ************ or by email at **********************. Equal Employment Statement San José State University (SJSU) is an Equal Opportunity employer committed to nondiscrimination on the basis of age, ancestry, citizenship status, color, creed, disability, ethnicity, gender, genetic information, marital status, medical condition, national origin, race, religion or lack thereof, sex, sexual orientation, transgender, or protected veteran status consistent with applicable federal and state laws. This policy applies to all SJSU students, faculty and staff programs and activities. Title IX of the Education Amendments of 1972, and certain other federal and state laws, prohibit discrimination on the basis of sex in all education programs and activities operated by the university (both on and off campus).

UTLX As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Union Tank Car Company is seeking applicants to become a Valve Specialist at our full-service rail tank car repair shop in Cleveland, Texas. The Company's regulatory, engineering and commercial expertise make UTLX the preferred source of railcars and services for many of its customers. Owned by the Marmon Group and Berkshire Hathaway, UTLX headquarters is in Chicago's financial district, close to major public transportation hubs. UTLX offers competitive compensation and benefits as well as an opportunity to be a part of a top-notch team where enthusiasm, expertise, growth, and progressive thinking are valued. We are seeking a 3rd shift Valve Technician for our Valve shop that will perform assembly and disassembly processes, as well as additional responsibilities as needed. The rate of pay for this role will be $26.59-$28.10 plus shift differential. Primary Job Functions This is not an exhaustive list and employees in these classifications frequently may be required to perform additional duties. Not all classifications will be required to perform all job functions. Removes, cleans, repairs, tests, and applies valves and fittings when required. Disassembles and assembles fittings on tank cars. Tests tank car, fittings, and valves to reveal possible defects. Rebuilds tank car fittings and valves; tests them using specified methods. Maintains stock levels of and issues tools, spare parts, safety equipment, and related repair and repair support items to production, maintenance, and other production support personnel. Performs inspection to issued items to ensure that they are safe and in satisfactory condition. Maintains work area in a neat and orderly manner and reports potential hazards. Knowledge and Skills Required Must possess a High School Diploma/GED; or have the ability to successfully complete an on-site basic skills assessment. Must have strong mechanical abilities and be familiar with power tools. Environmental Conditions Moderate to heavy physical effort involved. Lifts and carries necessary equipment to car to perform operation. Climbs, walks, and balances on top of car. Uses hand tools, power tools, and equipment. Must follow prescribed safety rules to avoid possible injury. Why Join Our Team? We take pride in offering our employees rich benefits packages. We appreciate hard-working and passionate individuals which is why we offer... Medical, dental, vision Company-paid employee life insurance Company-paid sickness and accident income 401k matching Annual safety shoe reimbursement Holiday pay Vacation Marmon employee discount program Legally can work in US now & future without sponsorship (preferred) Work Location: Cleveland, Texas We are an equal opportunity workplace (EEOC)#LI-DNI Pay Range: 26.59 We offer a comprehensive benefits package that may include medical, dental, vision, 401k matching, and more! Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Job DescriptionSUMMARYPerforms corrective and preventative maintenance, troubleshoots and repairs facilities, laboratory, production, reclaim, distillation, and cylinder refurbishing equipment according to manufactures, Occupational Safety and Health Administration (OSHA), and Environmental Protection Administration (EPA) guidelines.ESSENTIAL DUTIES AND RESPONSIBILITIES Responsible for maintaining, troubleshooting, repairing, and extending the useful life of the facility, equipment, and systems. Ability to work with current and future equipment including but not limited to drives, bearings, seals, gear boxes, boilers, steam system, safety valves, pumps, gate & ball valves, pressure regulating devices, electrical switch gear, motor control centers, starters, circuit breakers, chilled water, HVAC, compressed air (high & plant), and vacuum systems, vapor compressors, chemical fume hoods, scales, stretch wrapper, reach stacker, rail cars, track mobile, and appliance repairs, Performs general repairs such as carpentry, dry wall finishing, carpet, floor, and ceiling tile work. Ability to repair or rebuild pumps, compressors, and valves. Ability to read and understand engineering drawings, piping & instrumentation diagrams (P&IDs), schematics, and operation & maintenance manuals. Must be able to perform confined space entry procedures mandated by the company. Sets up, operates, and maintain corded or cordless drills, reciprocating saws, and grinders, drill press, band saw, pipe treading machine, impact wrench, and sewer snake machine. Proficient in measuring, cutting, and threading pipe with a pipe threading machine and hand threader. Ability to perform hot work - welding (MIG & stick), brazing, soldering, and cutting. Operate Pro-press equipment. Self-starter yet able to take orders as directed Must demonstrate the ability to safety utilize a forklift, boom lift, and scissor lift. Customer focus achieving Company, department, and personal goals through a strong customer focus. Must be able to work weekends and overtime if necessary. Employees holding this position will be required to perform any other duties as requested by Management. QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.EDUCATION AND OR EXPERIENCEHigh school diploma or general education (GED).Completion of a recognized vocational education program in Maintenance, Electrical, or Welding field or 1 year work experience in field.LANGUAGE SKILLSAbility to read and interpret documents such as safety rules, engineering drawings, piping & instrumentation diagrams (P&IDs), schematics, and operation & maintenance manuals. Ability to understand and follow verbal, written, or demonstrated instructions. Ability to receive and comprehend and effectively communicate detailed information through verbal and written communication. Ability to record data accurately and legibly.MATHEMATICAL SKILLSAbility to add, subtract, multiply and divide in all units of measure, using whole number, common fractions and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs.COMPUTER SKILLSMust be familiar with or learn the company's CMMS (Manager Plus), and must be proficient in Excel and Word.REASONING ABILITYAbility to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form.CERTIFICATES, LICENSES REGISTRATIONS Current driver's license. EPA Universal Certification (preferred but not mandatory) Welding certificates, such as GMAW, SMAW (preferred but not mandatory) PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to perform reaching, standing, walking, pushing, pulling, lifting, climbing, and grasping. The employee must be able to lift and or move up to 50 pounds. The employee must have clarity of vision sufficient to maintain a valid driver's license. WORK ENVIRONMENTThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Exposure using personnel protective equipment to high voltage, high pressure steam, compressed air (high & plant), refrigerants, vacuum, dust, dirt, latex, waste water, and other common environmental hazards. The employee is occasionally exposed to wet and or humid conditions and other outside weather conditions.The noise level in the work environment is usually moderate. TOOL REQUIREMENT Basic hand tools - such as but not limit to wrenches (SAE, Metric, & adjustable), sockets & ratchet, screw drivers (flat & Phillips), hammers (ball peen, claw, & mallet), and multi-purpose pliers. Plus a box to secure your tools. Multi-meter

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. About The Job: The Plant Maintenance Technician is responsible for maintaining site reliability by performing high-quality inspections, troubleshooting basic preventative maintenance (PM) tasks, and executing routine maintenance with no supervision. This role includes replacing basic components and assisting in minimizing unplanned downtime through proactive maintenance efforts. What You'll Do: Safety and Compliance * Adhere to all safety regulations and protocols, including wearing appropriate PPE, and following MSHA/OSHA regulations. * Maintain a high level of situational awareness to prevent accidents and ensure the safety of yourself and others. * Report any safety concerns, incidents, or equipment malfunctions promptly. Equipment Inspection and Maintenance * Follow a preventative maintenance schedule for equipment to avoid unexpected breakdowns, which might involve component changes, tear-downs, and rebuilds. * Inspecting and replacing key components that are crucial for maintaining efficient plant operations. Technicians must understand how replacing or servicing parts affects the overall performance and longevity of the equipment. * Troubleshooting the root cause of simple issues quickly and efficiently. Maintenance Technicians should be able to fix minor equipment issues immediately to avoid larger breakdowns and ensure minimal downtime. Plant Operations and Maintenance Requirements * Monitor equipment performance, such as crushers, screens, and conveyors, to ensure equipment is operating at full capacity. * Reviewing and updating equipment logs to identify patterns in maintenance needs and determine if any equipment is being overused or consistently breaking down, adjusting the operational schedule, or suggesting repairs before larger issues arise. Skills You'll Need: Education: High school diploma or equivalent preferred. Experience: Minimum of 1 year of experience in operations, preferably within the aggregate industry. Certifications/Licenses: Valid Driver's License Knowledge, Skills, and Abilities: * Strong understanding of safety protocols and MSHA/OSHA regulations. * Strong understanding of plant operations and maintenance requirements * Proficiency in conducting thorough inspections of all site areas * Ability to troubleshoot and resolve basic PM and maintenance issues * Knowledge of component replacement and its impact on plant performance Critical Competencies: Repairing and Maintaining Mechanical Equipment: Ability to independently perform routine maintenance and component changes Monitoring Processes, Materials, or Surroundings and Troubleshoot: Detail-oriented approach to inspections and identifying potential failures Making Decisions and Solving Problems: Strong troubleshooting skills for basic mechanical and operational issues Communication and Collaboration: Effective collaboration with team members to support plant operations Evaluating Information to Determine Compliance with Standards: Dependable, safety-conscious, and able to work effectively within a team Proactiveness: Proactive mindset in minimizing unplanned downtime and improving reliability What You'll Like About Us: Salary. The salary is prescribed by the applicable collective bargaining agreement. Candidates will be placed according to union contract salary scale at $40.37 per hour. * Full benefits package including health insurance, a pension plan, paid vacation. * This position is covered by a collective bargaining agreement. Great Company Culture: Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe: The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work: What sets us apart is the work we do impacts our daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits: Medical, Dental, and Vision programs, plus much more. Rest and Relaxation: Paid vacation, personal floating days, and paid holidays. Prepare for the Future: 401(k) with company match and contribution. Training and Development: We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. The does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. The Company may at any time, in its sole discretion, modify or vary from anything stated in this job description, with or without notice.

At Veritas Steel, were leading the way in the bridge fabrication industry and want you to join our team! We look for people who are committed to working safely by performing their job to the best of their ability, as well as people who enjoy fun and hard work. Ready to leave your legacy? Join the Veritas Steel team today! A Day in the Life: As a Maintenance Technician employed at Veritas Steel's Wausau location, you are responsible for the repair of electrical & electronic CNC equipment programming interfaces, portable air, and electric production tools, hydraulic equipment, welding equipment, Kinetic burning tables, and drilling machines; along with the facility building and yard maintenance. You have a high level of technical skill and complete high-quality work. Your Skills Include: Maintenance experience with two or more kinetic burn and drilling machining centers, CNC machines, beam lines, angle masters, Lincoln electric controllers, or welding equipment; required Identify problems with all equipment, find a safe solution promptly, know where to go for needed resources, process paperwork, and maintain inventory using the implemented process(s) Prioritize, schedule, and furnish projects to the maintenance crew Effectively communicate with crews, supervisors, and office personnel Anticipate needs of equipment and inform supervisors of status(s) Coordinate work with all shops and yard crews Use personnel skills to enable crews to work effectively (communication, handle issues, prevent personnel problems) Use cost-effective processes and solutions Your Day Includes: Strong knowledge and experience in electronic controls and PLC programming Certified Lincoln Electric controller repair Strong background in CNC programming for various machining centers and burn tables Assure safe equipment handling and repair techniques are always utilized by all personnel Advise floor supervisors of equipment repair status(s) Work with crews to accomplish production goals, and quality needs and requirements Coordinate planning and execution with supervisors to schedule needed equipment & repairs Be an active member of the pre-planning maintenance group Teach and mentor maintenance crew Ensure quality work is being performed Ensure all documentation is filled out and accurate, work orders /logbook When issues occur stop and alert supervisor(s), discuss a solution Actively identify ways of improving performance Maintain a safe working area and clean up after the task is done Your Environment: Work is performed indoors in a large warehouse or outside in all weather conditions There is regular exposure to dirt, dust, paint fumes, noise, moving equipment, heavy steel & other possible hazardous conditions Safety glasses, hearing protection, hard hats, and steel-toed boots are required; a respirator is required for specific operations Veritas Steel is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Monday through Thursday 3:45pm to 3:15am and Fridays 3:45pm to 8:45pm. PI00c35a89a614-31181-39168759

Mack Industries is looking to hire a Plant Maintenance Technician to add to our Plant Maintenance Team. In this position one would perform duties related to the installation, repairs and maintenance of production equipment, facilities maintenance and heavy equipment maintenance such as overhead cranes. Essential Functions Create, assemble and repair structures, components and equipment essential for maintaining facilities and machinery Inspects, diagnoses, and perform advanced electrical and electrical repairs, equipment improvements and upgrades Plan, schedule, coordinate, lead and perform preventative and corrective maintenance based on established procedures on production machinery, overhead cranes and plant facilities Follows up on repairs ensuring that the performed work is effective Ability to read and understand electrical and mechanical drawings and schematics Willingness to work at heights above 20' Performs routine maintenance and as needed maintenance on all equipment related to the production processes and plant facilities. Equipment such as but not limited to production equipment and overhead cranes Willingness to develop new skills and progress current skills Willingness to assist other departments as needed Requirements Education and Training High School diploma or equivalent Minimum Qualifications Maintenance experience on production equipment and overhead cranes preferred Basic electrical knowledge required. Advanced electrical knowledge preferred Welding experience required Knowledge in PM's, belt conveyors, overhead cranes, hydraulics and pneumatics, bearings, gearboxes and torch cutting Ability to work in a fast-paced environment Ability to manage multiple operations at once Strong written and verbal communication skills Environment Conditions and Physical Strain Construction environment, seasonal weather conditions Due to the nature of the operation, the levels of noise, dust and dirt can be high. Must be able to lift up to 75 lbs., on occasion Must be able to stand and sit for extended periods of time Must be able to squat, crawl, climb and kneel to complete tasks Behavioral Traits Willingness to work collaboratively within a team Customer focused, attentive and responsive. Proactive and independent with the ability to take initiative Shows good judgement in difficult situations Organized with attention to detail Shows accountability for efforts and results This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Mack Industries, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

Description: Mack Industries is looking to hire a Plant Maintenance Technician to add to our Plant Maintenance Team. In this position one would perform duties related to the installation, repairs and maintenance of production equipment, facilities maintenance and heavy equipment maintenance such as overhead cranes. Essential Functions Create, assemble and repair structures, components and equipment essential for maintaining facilities and machinery Inspects, diagnoses, and perform advanced electrical and electrical repairs, equipment improvements and upgrades Plan, schedule, coordinate, lead and perform preventative and corrective maintenance based on established procedures on production machinery, overhead cranes and plant facilities Follows up on repairs ensuring that the performed work is effective Ability to read and understand electrical and mechanical drawings and schematics Willingness to work at heights above 20' Performs routine maintenance and as needed maintenance on all equipment related to the production processes and plant facilities. Equipment such as but not limited to production equipment and overhead cranes Willingness to develop new skills and progress current skills Willingness to assist other departments as needed Requirements: Education and Training High School diploma or equivalent Minimum Qualifications Maintenance experience on production equipment and overhead cranes preferred Basic electrical knowledge required. Advanced electrical knowledge preferred Welding experience required Knowledge in PM's, belt conveyors, overhead cranes, hydraulics and pneumatics, bearings, gearboxes and torch cutting Ability to work in a fast-paced environment Ability to manage multiple operations at once Strong written and verbal communication skills Environment Conditions and Physical Strain Construction environment, seasonal weather conditions Due to the nature of the operation, the levels of noise, dust and dirt can be high. Must be able to lift up to 75 lbs., on occasion Must be able to stand and sit for extended periods of time Must be able to squat, crawl, climb and kneel to complete tasks Behavioral Traits Willingness to work collaboratively within a team Customer focused, attentive and responsive. Proactive and independent with the ability to take initiative Shows good judgement in difficult situations Organized with attention to detail Shows accountability for efforts and results This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Mack Industries, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

Summit Materials is looking for an experienced, hands-on Plant Maintenance Technician to support our quarry operations team. This position is responsible for providing stationary equipment maintenance, mechanical repairs, and minor fabrication. The ideal candidate will be mechanically inclined with the ability to solve problems under pressure. Daily functions may include preventative maintenance, changing bearings, replacing conveyor rollers, belts, shives, wire cloth and urethane screens; installing Flexco splices, clips, and super screws; rebuilding crushers and chutes. Benefits * Recession Resistant Industry * Consistent work, with a work/life balance * Overtime Opportunities * Paid Holidays * Paid Time Off * 401(k) Plan w/ employer match contribution * Medical / Dental / Vision plan offered * Life Insurance - Company Paid * Short-term / Long-term Disability Insurance - Company Paid Roles & Responsibilities * Preventative maintenance throughout the quarry and plant. * Problem solving when issues arise, under pressure. * Rebuilding parts of the stationary equipment, i.e., crushers, chutes, screens, etc. * Communicating with the leadership team to ensure proper operations decisions are made timely. * Welding, repair, and fabrication on rock crushing equipment associated with quarry operations. * Following all safety measures * Additional duties assigned by leadership. * Ability to perform repetitive and continuous functions, as necessary. * Respond quickly to hazards of safety concerns. QUALIFICATIONS / REQUIREMENTS * High School diploma or GED * 3-5 years of related experience but does not have to be industry * Specific types of vision to include close, distance, peripheral, depth and ability to adjust focus. * Ability to respond quickly to hazards and safety concerns. Get Hired What to Expect During our Hiring Process * Background Check * Motor Vehicle Record Check * 5-Panel Drug Screen * Fit for Duty Baseline Physical (if applicable) * Paid Orientation * A great team to support you throughout your career with Summit Materials companies! Build a Lasting Career with us. Begin Here. Go Anywhere. Apply now! Summit Materials consists of more than a dozen local companies that supply aggregates, cement, ready-mix concrete, asphalt paving, and construction services in the United States and western Canada. At Summit Materials, we support our teammates who lay the groundwork for our communities and live by our core values: Safety, Integrity, Sustainability, and Inclusivity. We'repassionate about our teammates, our work, and our communities. Each of Summit's companies celebrates their individual legacies, but together - we are Summit Materials. At Summit Materials, we provide the foundation to connect our communities today and build a better tomorrow. We value all our communities - including our diverse internal community of teammates that make us stronger. No matter your race, ethnicity, gender, age, or anything that makes you who you are...you belong. #INDAS Req #: 2207

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. About The Job: The Plant Maintenance Technician is responsible for maintaining site reliability by performing high-quality inspections, troubleshooting basic preventative maintenance (PM) tasks, and executing routine maintenance with no supervision. This role includes replacing basic components and assisting in minimizing unplanned downtime through proactive maintenance efforts. What You'll Do: Safety and Compliance * Adhere to all safety regulations and protocols, including wearing appropriate PPE, and following MSHA/OSHA regulations. * Maintain a high level of situational awareness to prevent accidents and ensure the safety of yourself and others. * Report any safety concerns, incidents, or equipment malfunctions promptly. Equipment Inspection and Maintenance * Follow a preventative maintenance schedule for equipment to avoid unexpected breakdowns, which might involve component changes, tear-downs, and rebuilds. * Inspecting and replacing key components that are crucial for maintaining efficient plant operations. Technicians must understand how replacing or servicing parts affects the overall performance and longevity of the equipment. * Troubleshooting the root cause of simple issues quickly and efficiently. Maintenance Technicians should be able to fix minor equipment issues immediately to avoid larger breakdowns and ensure minimal downtime. Plant Operations and Maintenance Requirements * Monitor equipment performance, such as crushers, screens, and conveyors, to ensure equipment is operating at full capacity. * Reviewing and updating equipment logs to identify patterns in maintenance needs and determine if any equipment is being overused or consistently breaking down, adjusting the operational schedule, or suggesting repairs before larger issues arise. Skills You'll Need: Education: High school diploma or equivalent preferred. Experience: Minimum of 1 year of experience in operations, preferably within the aggregate industry. Certifications/Licenses: Valid Driver's License Knowledge, Skills, and Abilities: * Strong understanding of safety protocols and MSHA/OSHA regulations. * Strong understanding of plant operations and maintenance requirements * Proficiency in conducting thorough inspections of all site areas * Ability to troubleshoot and resolve basic PM and maintenance issues * Knowledge of component replacement and its impact on plant performance Critical Competencies: Repairing and Maintaining Mechanical Equipment: Ability to independently perform routine maintenance and component changes Monitoring Processes, Materials, or Surroundings and Troubleshoot: Detail-oriented approach to inspections and identifying potential failures Making Decisions and Solving Problems: Strong troubleshooting skills for basic mechanical and operational issues Communication and Collaboration: Effective collaboration with team members to support plant operations Evaluating Information to Determine Compliance with Standards: Dependable, safety-conscious, and able to work effectively within a team Proactiveness: Proactive mindset in minimizing unplanned downtime and improving reliability What You'll Like About Us: Salary. The base salary range for this role is between $32.00 - 38.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Great Company Culture: Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe: The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work: What sets us apart is the work we do impacts our daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits: Medical, Dental, and Vision programs, plus much more. Rest and Relaxation: Paid vacation, personal floating days, and paid holidays. Prepare for the Future: 401(k) with company match and contribution. Training and Development: We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. The does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. The Company may at any time, in its sole discretion, modify or vary from anything stated in this job description, with or without notice.

Plant Maintenance-2nd Shift Reports To: Plant Manager Summit Materials is looking for an experienced, hands-on Plant Maintenance Technician to support our quarry operations team. This position is responsible for providing stationary equipment maintenance, mechanical repairs, and minor fabrication. The ideal candidate will be mechanically inclined with the ability to solve problems under pressure. Daily functions may include preventative maintenance, changing bearings, replacing conveyor rollers, belts, shives, wire cloth and urethane screens; installing Flexco splices, clips, and super screws; rebuilding crushers and chutes.Benefits Benefits & Perks Recession Resistant Industry Consistent work, with a work/life balance Overtime Opportunities Paid Holidays Paid Time Off 401(k) Plan w/ employer match contribution Medical / Dental / Vision offered the first of the month following start date Life Insurance Company Paid Short-term / Long-term Disability Insurance Company Paid How to Get Started STEP ONE: Complete our online application (linked here) STEP TWO: Be prepared to speak with one of our Recruiters, as they'll be reaching out to you soon. STEP THREE: Keep an eye on your texts and emails, we'll use this to send you additional details, questions, and information pertaining to our hiring interview and selection process. Get Hired: What to Expect During our Hiring Process Background Check Motor Vehicle Record Check DOT 5-Panel Drug Screen Fit for Duty Baseline Physical Paid Orientation A great team to support you throughout your career with Summit Materials companies! Roles & Responsibilities ESSENTIAL DUTIES AND RESPONSIBILITIES Preventative maintenance throughout the quarry and plant. Problem solving when issues arise, under pressure. Rebuilding parts of the stationary equipment, i.e., crushers, chutes, screens, etc. Communicating with the leadership team to ensure proper operations decisions are made timely. Welding, repair, and fabrication on rock crushing equipment associated with quarry operations. Following all safety measures Additional duties assigned by leadership. Ability to perform repetitive and continuous functions, as necessary Respond quickly to hazards of safety concerns. QUALIFICATIONS / REQUIREMENTS High School diploma or GED 3-5 years of related experience but does not have to be industry Specific types of vision to include close, distance, peripheral, depth and ability to adjust focus. Ability to respond quickly to hazards and safety concerns. #INDKT

This position is responsible for providing stationary equipment maintenance, mechanical repairs, and fabrication. The ideal candidate will be mechanically inclinded and have experience in welding. Benefits Recession Resistant Industry Consistent work, with a work/life balance Overtime Opportunities Paid Holidays Paid Time Off 401(k) Plan w/ employer match contribution Medical / Dental / Vision plan offered Life Insurance - Company Paid Short-term / Long-term Disability Insurance - Company Paid Roles & Responsibilities Ability to follow instructions Must be able to work 10-12 hour shift daily Must be able to occasionally work Saturdays Role requires employee to work at high elevations Will be welding and doing some mechanical work on the asphalt plant Strict adherence to safety requirements and procedures at all times Wearing the proper PPE equipment including fall protection when necessary Ability, Skills, & Knowledge Must know how to cut and arc weld (mig or tig) Mechanically inclined Needs to be able to work at higher elevations Ability to work outdoors in various weather conditions and perform physically demanding tasks. Ability to comprehend simple instructions High school education or GED equivalent Get Hired What to Expect During our Hiring Process Background Check Motor Vehicle Record Check 5-Panel Drug Screen Fit for Duty Baseline Physical (if applicable) Paid Orientation A great team to support you throughout your career with Summit Materials companies! Build a Lasting Career with us. Begin Here. Go Anywhere. Apply now! Summit Materials consists of more than a dozen local companies that supply aggregates, cement, ready-mix concrete, asphalt paving, and construction services in the United States and western Canada. At Summit Materials, we support our teammates who lay the groundwork for our communities and live by our core values: Safety, Integrity, Sustainability, and Inclusivity. We'repassionate about our teammates, our work, and our communities. Each of Summit's companies celebrates their individual legacies, but together - we are Summit Materials. At Summit Materials, we provide the foundation to connect our communities today and build a better tomorrow. We value all our communities - including our diverse internal community of teammates that make us stronger. No matter your race, ethnicity, gender, age, or anything that makes you who you are...you belong.

Paragon Technologies, a SunSource company, specializes in providing world-class service, repair and re-manufacturing in the areas of electronics, hydraulics, robotics, servos and mechanical components for various industries. **************************** Responsibilities Inspect, test and repair all types of hydraulic, servo and proportional valves on a timely basis Disassemble components and for service and repair including teardown and inspection of unit Analyze unit and parts involved to prepare a listing of parts that are worn, damaged, or not functioning properly The servo technician is responsible for rebuilding and testing various servo and proportional valves. LIMITATIONS AND DISCLAIMER The above job description is meant to describe the general nature of the work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. Continued employment remains on an “at-will” basis. Experience & Skills Able to use a variety of hand tools required for repair Able to use micrometer, veunier calipers, and multi-meter Possess a basic understanding of hydraulic valves Able to properly punch mark and teardown valves Demonstrates the ability to safely operate fork trucks and lifts Able to “run in” servo valves on hydraulic test stands Able to build standard servo valves Ability to set up and test servo valves Ability to use a variety of measuring tool such as micrometers, ID micrometers, and calipers. Able to use electrical test equipment Possesses mechanical ability Regularly required to stand, sit, bend and lift up to 50 pounds Ability to carry out multiple tasks simultaneously in a fast-paced shop environment Ability to read blueprints is a plus Use personal protective equipment when necessary (i.e. Viton gloves and safety glasses) 40-50 hours per week, overtime may be required Equal Opportunity Employer, including disability and protected veteran status. If you are an individual with a disability and require an accommodation to complete the application process, please contact ********************** to request reasonable accommodation. Only requests for accommodation in the application process will be returned from this email address. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here, aquí). Sun-Source | Privacy Policy

With 7 facilities covering 21 states, Pioneer services industrial equipment for the power, chemical, petrochemical, pulp & paper, food & beverage, and pharmaceutical industries. The industrial equipment Pioneer services include Pressure Relief Valves (PRVs), Control Valves, Line Valves, Instrumentation, Pumps, Blowers, Mechanical Seals, and Fluid Sealing applications. Valve repair has been a cornerstone of Pioneer's business for over 34 years and continues to grow. A Valve Technician would perform the essential duties of new valve assembly and valve repair / certification of various types of valves both in shop and onsite at customer facilities. Pioneer provides in house training along with factory supplemented training. Pioneer provides great potential for upward growth. Responsibilities and Duties: Follow all Pioneer Safety and Quality procedures and regulations Operate equipment - overhead hoists, sand blaster, parts washer, propylene torch, etc. Disassemble valve without damaging parts per the manufacturer's Installation & Operation Manual Document and enter job data into ValvKeep database and document photos Coordinate with office personnel on repair requirements Maintain a clean and organized work area Maintain equipment in area, as required Cleaning, blasting, and painting valve components Return Valves/Parts to Proper Bins, Boxes, etc. Assemble, calibrate, tag and certify valve per manufacturer's repair manuals May be required to help in field assignments May be required to climb and work at various elevations depending on job scope Operate motor vehicle, as required Attend job and safety training, as necessary or required Requirements and Qualifications: High school diploma or GED. Desire a technical or trade school degree. The right candidate will the ability to learn our trade and has experience working hand and power tools. Required skills: Safe Working Attitude Attention to detail Basic computer knowledge Desired skills: Organized and effective time management skills Concise communication skills The right employee exemplifies: A Positive attitude A Punctual disposition Initiative and is always looking for work during down moments Good integrity and dutifulness adaptiveness to a constantly changing schedule Attentiveness to surroundings Must be able to travel and have a clear driving record in accordance with Pioneer driving guidelines Capable of holding forklift operation certificate Physical abilities Must be able to lift max of 50 lbs Must be able to work in hot and cold environments

Job Description Millennium Power Services is seeking a skilled and experienced Valve Technician to join our team in Westfield, Massachusetts. As a Valve Technician, you will be responsible for the installation, maintenance, and repair of various types of valves used in industrial processes. The ideal candidate should have a strong mechanical aptitude, exceptional troubleshooting skills, and a keen attention to detail. This role requires the ability to work independently and as part of a team to ensure the efficient and reliable operation of valves within a variety of industries. Valve Technicians will be required to travel approximately 50% - 75% of the time. Key Responsibilities: Valve Installation and Maintenance: Install, inspect, and maintain a variety of valves, including control valves, safety valves, gate valves, globe valves, and ball valves. Perform routine maintenance tasks to ensure the optimal functioning of valves and associated equipment. Diagnose and troubleshoot valve-related issues, implementing corrective measures as needed. Testing and Calibration: Conduct testing and calibration of valves to ensure they meet industry standards and specifications. Use precision tools and instruments to measure, adjust, and document valve performance. Implement preventive measures to extend the lifespan and reliability of valves. Documentation and Reporting: Maintain accurate records of valve installations, repairs, and maintenance activities. Generate reports detailing findings, recommendations, and actions taken during inspections and repairs. Collaboration and Communication: Collaborate with engineers, project managers, and other team members to plan and execute valve-related projects. Communicate effectively with clients to understand their specific valve requirements and provide technical support as needed. Safety and Compliance: Adhere to safety protocols and industry regulations when working on valves. Ensure that all valve-related activities comply with relevant standards and guidelines. Qualifications and Skills: High school diploma or equivalent; additional technical education or certification in valve technology is a plus. Proven experience as a Valve Technician or in a related field. Strong mechanical aptitude and troubleshooting skills. Familiarity with different types of valves and their applications. Ability to read and interpret technical drawings and specifications. Proficient in using precision tools and instruments. Excellent communication and interpersonal skills. Attention to detail and commitment to quality workmanship. Ability to work independently and as part of a team. Physical Requirements: Ability to lift and carry heavy equipment. Comfortable working in confined spaces and at heights. Willingness to work in varying weather conditions. Features and Benefits Relocation package is available. Pay rate is based on experience, knowledge, and ability. Weekend and overtime hours paid at elevated rates. Health, medical, and dental benefits. Short- and long-term disability plans. Life insurance policy and 401K plan. Paid time off and paid holidays. Company uniforms provided. Clean and safe work environment. If you have a passion for valve technology, a commitment to safety, and the skills to excel in a dynamic work environment, we invite you to apply for the position of Valve Technician. Join our team and contribute to the reliability and efficiency of industrial processes through expert valve maintenance and repair.