Maintenance Technician jobs at Thyssenkrupp Access - 3707 jobs

Reporting directly to the Glass Operations Supervisor, the Machine Maintenance Technician is an experienced machine maintenance worker ensuring that all Fosbel machines are maintained to meet quality standards, which will add to the high level of customer satisfaction. As part of the Warehouse Team, at times, this individual will assist with inventory control, material handling and other warehousing activities. ESSENTIAL DUTIES AND RESPONSIBILITIES The following is an outline of the basic duties and responsibilities of the above-titled position. It describes the duties and responsibilities in the broad scope, and is not intended to be all-inclusive, and does not constitute a contract of employment. Individual(s) in this position may from time-to-time be assigned other duties as appropriate. Collaborates with the Technical Department in developing maintenance procedures for the use and repair of all machines/equipment used in Fosbel refractory repair processes.(i.e., ceramic welding, gunning, and coating machines). Builds new machines as required to support introduction of new technologies and business development.Specification for the new generations of machines are developed by Technical Department personnel. Input of the Machine Maintenance Technician is very important to the successful completion of next generation machines and equipment. Continuous improvement of legacy machine designs is vitally important to the success of the organization and the Machine Maintenance Technician is an integral part of this process. Develops and coordinates inspection and routine maintenance schedules for the individual job sites. Performs scheduled preventive maintenance and inspections on machines/equipment. Repairs machines/equipment as breakdowns and malfunctions occur, including welding and fabrication. Owns the machine maintenance area and equipment therein, ensuring a clean, orderly efficient workplace. Works with the Glass Operations Supervisor to develop the schedule for machine PMs, repairs and new machine builds to successfully support operation. Responsible for the successful realization of that schedule once established. Provides troubleshooting assistance/advice and training to field personnel to enable simple and routine repairs. Works independently and within a team for project work. Observes good housekeeping and safety habits, follows Fosbel policies and procedures and performs other duties as assigned. Supports Warehouse (WHS) operations with responsibilities relating to staging and preparing equipment, machines, and toolboxes for jobs. QUALIFICATIONS (KNOWLEDGE, SKILLS AND ABILITIES) Ability to read, understand and apply technical specifications. Previous experience with welding and fabrication preferred. Mechanical and electrical capability that includes pneumatic/oxygen systems, valves, gauges, motor / gear box assemblies, basic wiring, etc. Working knowledge of Lean, Standardization and Practical Problem Solving. Conceptual knowledge of PLC capability and operation, relationship of volume, pressure and mass regarding solids and gases, pressure vessel care and maintenance. Good technical writing skills. Ability to build effective relationships and liaise with colleagues at all levels and from various cultures. Self starter, able to work with minimal management input. Good communication and interpersonal skills. Working knowledge of a variety of computer software applications. Must be able to work in an ever-changing environment with demonstrated ability to prioritize and juggle competing tasks and demands. EDUCATION AND EXPERIENCE High school diploma (or GED), formal training in machine maintenance and technical writing, and three to five years of refractory machine maintenance experience preferred. WORKING CONDITIONS (ENVIRONMENT/PHYSICAL DEMANDS) Hands on work with pneumatic, electrical and oxygen systems and tools. Willingness to work with dirty / oily equipment Lifting required of up to 50 pounds. Warehouse conditions can be dirty, noisy, hot/cold. Must be able to travel if needed (domestically or internationally) to help out, train or otherwise assist Fosbel sites around the world.

Ash Grove family of companies is one of North America's leading cement manufacturers, with a legacy of innovation and excellence dating back to 1882. The company operates 12 world-class cement plants and a vast network of 41 terminals across the United States and Canada. Renowned for its forward-thinking approach, Ash Grove combines technical expertise, robust safety standards, and empowered talent to deliver high performance and better serve our customers. At Ash Grove, we stand together to reinvent the way our world is built. To learn more about us go to **************** At Ash Grove Cement, people are our first priority. We offer a complete benefits package to include: Health Insurance Dental Insurance Vision Insurance Retirement Plan Paid Time Off, Paid Holidays Tuition Reimbursement Employee Assistance Program Disability Pay Life Insurance Growth Opportunities and more! Summary: The Maintenance Supervisor schedules, coordinates, and supervises the maintenance crew, preventive/predictive maintenance, and mechanical repair activities. What you'll be contributing: Promote and follow all plant safety guidelines. Provides technical assistance in the safe use of tools and equipment, training new and current employees on proper procedures, techniques, and safety precautions. Schedules and coordinates daily preventive/predictive maintenance and mechanical repair activities and projects. Inspects job sites before beginning maintenance projects to identify hazards and ensure a safe work environment. Operates computerized preventive maintenance and repairs system to prepare work orders, document work activities, and maintain all records. Assesses and gives performance feedback to the maintenance crew. Maintains records of attendance and paid time off. Analyzes and writes job procedures for new jobs and modifies procedures for existing jobs Estimates time and parts required to complete projects and repairs. Collaborates with Purchasing Agent to ensure adequate supplies are ordered or in stock for projects. Assists in contacting vendors and obtaining contractors regarding maintenance needs Attends and regularly conducts safety meetings and inspections to ensure compliance with safety requirements. Coordinate and supervises the work of contractors for specified maintenance activities Assists in preparing the budget for capital expenditures planned for maintenance projects and repairs Participates in the monthly conference calls with Manufacturing Extension Partnership (MEP). Additional duties as assigned by supervisor. To succeed in this position, you will need: High School Diploma or GED is required 2 year/Associates Degree in a related area is preferred Minimum 3 years of supervisory or maintenance experience in engineering, or facility management in a similar position in related field. A combination of relevant experience may be accepted in lieu of a diploma/degree. Ability to read, write, and understand warning labels, instructions, signs, etc. Proficient in English written and verbal communication skills Knowledge of maintenance and repair required for plant equipment and structures Demonstrates project management skills Ability to uses independent judgment Ability to make decisions, plan, organize, and problem solve Ability to operate a personal computer Ability to read and understand equipment manuals, mechanical drawings and blueprints Aptitude for learning new computer software Knowledge of all equipment and machinery used in the plant and how each of them functions Knowledge of government regulations such as EPA regulations and MSHA as they apply to maintenance projects and repair activities Working knowledge of steel specifications, welding, conveyors, AC/DC motors, fans, hydraulic systems, fabrication, cutting torch basics, soldering, lubricants, carpentry, millwright work, mechanics, plumbing, electrical distribution systems, machine shop equipment and procedures, painting, torques wrenches, etc What's next for you? We provide stability and advancement opportunities across North America. Use our tuition reimbursement program to help you meet your career goals. The above duties and responsibilities are representative of the nature and level of work assigned and are not necessarily all-inclusive. The physical demands, working environment, and other conditions of employment listed in this document are representative of but are not intended to provide an exhaustive list of the requirements for positions in this classification. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Ash Grove Cement, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Exempt Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We're more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We're a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we're leading the industry with innovation and a safety-first mindset. Job Summary The Maintenance Supervisor is responsible for leading a maintenance team to work injury-free/incident free in a manufacturing environment. They will provide leadership and direction for their team in a way that motivates them to meet goals related to repairing plant equipment, minimizing downtime, and meeting safety goals. They are driven to continually improve performance and embrace changes that will help their team and company meet these goals, while working in conjunction with the production and management teams. Job Location This position is based in our facility in Raleigh, NC. Job Responsibilities Maintains safe working conditions and ensures a safety mindset, especially as it relates to working on equipment and using tools and machinery Drives safety excellence through promoting employee involvement, ownership, and accountability to proactively eliminate hazards Hires, schedules, and supervises full time staff and additional temporary staff as required Provides coaching and corrective feedback timely as well as administers disciplinary processes up to and including termination, as necessary Performs timely quarterly and annual reviews for all team members Facilitate team development and growth, employee skill development, problem-solving and resolution Oversees all process documentation and training program procedures for consistency of operational tasks, and the safety and cleanliness of the workplace Construct fixtures as required Creates a schedule and performs preventative maintenance and regular inspections on equipment Repairs facility equipment, fixtures, building, and grounds Directs maintenance team members in troubleshooting, repair and maintenance of equipment Orders tools, equipment, supplies and services necessary for repairs and maintenance Removes and/or installs fixtures and equipment for safe, efficient operation Troubleshoots electric, hydraulic, pneumatic, and mechanical systems to determine causes of failures and recommends solutions for repair Maintain cleanliness, functionality, and efficiency of maintenance equipment, tools, and fixtures Other duties may be assigned as needed Job Requirements Strong analytical, problem-solving, and critical thinking skills Ability to coach, develop and build a strong team of employees Strong listening and clear communication skills both written and verbal Ability to manage multiple priorities simultaneously Demonstrated ability to work in a results-oriented environment Forklift and Crane Certification or ability to obtain is required Welding skills preferred Strong working knowledge of electrical and hydraulic systems Ability to review and understand machine blueprints Ability to use hand tools and basic machine shop equipment Lifting may be required with assistance provided if needed Minimum one year of supervisory experience in a manufacturing environment preferred High school diploma or equivalent required, college degree preferred Must have experience in the maintenance field, at least 2 years is preferred Must have previous supervisory or leadership experience Proficient in Microsoft Office including Word and Excel Ability to perform basic mathematical skills such as calculating percentages and volumes and using fractions What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

Benefits: 401(k) Bonus based on performance Competitive salary Free uniforms Training & development Plumbing Careers at Benjamin Franklin Plumbing Do you value professionalism and punctuality? Do you want to work with the best professionals in the plumbing industry? Then you could be a candidate for Benjamin Franklin Plumbing! If you are an individual who values a rewarding career and would like your customers to be genuinely satisfied, you may be a match for our team. JOB SUMMARY The Lead Plumber is a senior, customer-focused service professional responsible for independently diagnosing, repairing, servicing, and replacing residential plumbing systems. This role requires strong technical plumbing skills, excellent customer service, and proficient use of ServiceTitan CRM to ensure accurate documentation, transparent pricing, and high customer satisfaction. JOB DUTIES Diagnose and repair residential plumbing systems Present Straight Forward Pricing using Good / Better / Best options and obtain customer approval prior to performing work Explain diagnoses, repair options, and completed work clearly to customers to ensure full understanding and satisfaction Accurately document all job details in ServiceTitan, including notes, photos, estimates, invoices, and customer authorizations Test all work prior to job completion to ensure proper operation and reduce callbacks Maintain a clean and safe jobsite, including use of floor savers and protection of customer property Deliver professional customer service and represent the company brand at all times Operate and maintain a company-assigned service vehicle in a clean and organized condition Follow all safety procedures and demonstrate safe driving habits MINIMUM REQUIREMENTS Minimum 5+ years of residential service plumbing experience Ability to work independently and operate a company service vehicle Strong customer service and communication skills Experience using ServiceTitan CRM or similar field service software (ServiceTitan preferred) Ability to present pricing confidently and close service work Valid driver's license with a clean driving record Knowledge of local plumbing codes and permit requirements

The QUIKRETE Companies is the leading manufacturer of packaged concrete and cement mixes in the United States and Canada, serving the commercial building and home improvement industries. With over 90 manufacturing facilities across the U.S., Canada, Puerto Rico, and South America, QUIKRETE ensures broad distribution and a diverse product range. Our state-of-the-art Technical Center enables us to deliver innovative and high-quality products to professionals and consumers alike. For more information, please visit our website at ***************** Role Description This is a full-time, hybrid on-site/travel Maintenance Technician role located in Johns Creek, GA. The Maintenance Technician will be responsible for performing equipment maintenance, troubleshooting, preventive maintenance, and conducting industrial and facility repairs. Additional responsibilities include inspecting systems, addressing operational issues, and ensuring machinery and equipment operate efficiently and safely. Collaboration with team members to meet operational and safety standards is also expected. Qualifications Proficiency in Equipment Maintenance and Troubleshooting Experience in Preventive Maintenance practices and Maintenance & Repair tasks Knowledge of Industrial Maintenance processes and tools Ability to identify and resolve mechanical and operational issues Strong attention to detail and adherence to safety protocols Previous experience in a manufacturing or industrial environment preferred High school diploma or equivalent; technical certifications are a plus Willingness to work on-site in Johns Creek, GA and on the road.

Benefits: Bonus based on performance Competitive salary Dental insurance Employee discounts Flexible schedule Health insurance Opportunity for advancement Paid time off Profit sharing Training & development Vision insurance Title: Residential Service Plumber Service Territory: Cuyahoga , Medina Counties & More Position Location: Dispatch From Home, Office Location in Medina Are You Ready To Earn What You Are Worth? Are You Ready To Take Control Of Your Career & Win? Benjamin Franklin Plumbing (Medina location) is hiring experienced residential plumbers! Here's what we offer: Compensation: $25-$35/hr base (depending on experience) Accelerated commission structure ON TOP OF your hourly..based on ticket size, AND your ability to build trust, solve problems and put the customer first. Our engaged & positive plumbers consistently earn high five to six figures total compensation. Our compensation model works really well for plumbers who are skilled technically AND comfortable with customer interaction. The hourly base keeps you safe, and the commission structure means you're rewarded for creating value, not just logging hours. And not being straight commission means we aren't about pressuring customers, nor will we tolerate that. Career Growth Opportunity: Upward Trajectory! We promote from within Build communication skills that will level up your career and life Continuing Technical Training Small company feel with larger company resources Benefits & Perks: Alternative & Flexible Scheduling Available Reasonable On Call Rotation ( We have on call, we are in the service business) Company-matched IRA & profit sharing Medical, Dental, Vision & Life Insurance Generous PTO Company service truck (take home, gas card included) Company tablet & phone allowance Year-round work (strong marketing keeps you busy) What We're Looking For: 3+ years residential plumbing experience Customer-first mindset Team player who's comfortable talking with homeowners Clean background, drug test & MVR About us: QTL Holdings, located in Medina OH, owns and operates Benjamin Franklin Plumbing locations in Medina, Columbus, and Dayton, plus One Hour Heating & Air in Medina and Dayton. We're Ohio owned (not private equity), and our leadership includes lifelong plumbers and HVAC tradespeople - not corporate suits who've never turned a wrench. Don't let the fact we are part of a franchise deter you - If you're looking for a place where your performance benefits you, leadership is accessible, and you're more than just a number, let's talk. * Tom Chuna Director of Recruiting QTL Holdings / Benjamin Franklin Plumbing

We are seeking a skilled and customer-focused Plumber with expertise in residential boiler systems to join our team. This role combines hands-on service work with sales responsibilities, focusing on diagnosing, servicing, and replacing residential boilers while educating homeowners on system upgrades and energy-efficient solutions. What can Benjamin Franklin Plumbing offer you? The opportunity you deserve to build your career with a well-established company. We prioritize promoting from within! Competitive pay rates, plus commission potential. Sign on bonus between $3000 to $6,000, based on experience. Paid training and professional development assistance. Service vans, fuel cards, company phone, and iPads provided. Referral program. A best-in-the-industry benefits package that includes generous PTO, health, dental, vision, life insurance, and 401k with company match! There's never been a better time to join our team! Responsibilities: Perform diagnostics, maintenance, and repairs on residential boiler systems. Conduct thorough inspections and provide detailed assessments to homeowners. Recommend and sell boiler replacements and upgrades based on customer needs and system condition. Install new boiler systems in compliance with local codes and manufacturer specifications. Provide exceptional customer service and build trust with homeowners. Maintain accurate records of service calls, sales, and installations. Stay current with industry trends, products, and technologies. Collaborate with the sales and operations teams to ensure smooth project execution. Qualifications: Valid plumbing license or certification (state-specific). Minimum of 3 years of experience in residential plumbing, with a focus on boiler systems. Proven track record in boiler service and sales. Excellent communication and interpersonal skills. Ability to work independently and manage time effectively. Comfortable with sales presentations and closing techniques. Valid driver's license and clean driving record. Preferred Skills: Experience with high-efficiency boiler systems and smart home integrations. Familiarity with CRM or service management software such as Service Titan or similar. EPA certification or HVAC experience is a plus. About Us: Benjamin Franklin Plumbing has been a trusted name in plumbing services for over 25 years, known for our commitment to quality and customer satisfaction. Our team enjoys a supportive work environment, competitive pay, and opportunities for growth, making us a great place to advance your plumbing career. Authority Brands Inc. conducts drug screens and background checks on applicants who accept employment offers. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions; however, we do not sponsor visas at this time. Authority Brands Inc is an Equal Opportunity Employer.

Benefits: 401(k) Bonus based on performance Company car Company parties Competitive salary Dental insurance Employee discounts Flexible schedule Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Tuition assistance Vision insurance Plumbing Careers at Benjamin Franklin Plumbing Do you value professionalism and punctuality? Do you want to work with the best professionals in the plumbing industry? Then you could be a candidate for Benjamin Franklin Plumbing! If you are an individual who values a rewarding career and would like your customers to be genuinely satisfied, you may be a match for our team. JOB SUMMARY A licensed plumber serves the clients of the company by expertly servicing, repairing, and replacing plumbing systems. JOB DUTIES Utilizes Straight Forward Pricing (including all company approved forms) correctly on each call Wears floor savers while in the client's home and maintains a neat work area while performing a repair or scheduled service Tests each aspect of the job before leaving a home to make sure everything is working properly. Ensures the job was indeed completed correctly and eliminates unnecessary callbacks after the job is finished Explains each service performed to the client each time a maintenance or repair is completed. Ensures clients are 100% satisfied with all work Conveys a safety-conscious attitude, both on the job and while driving Maintains cleanliness inside and outside of vehicles at all times MINIMUM REQUIREMENTS * A Tradesmen license is required to operate their own truck * Lead/Master Plumbers are considered senior level and typically operate their own truck

Join our team and earn a $2,000 new hire bonus; those with related experience earn $3,000 We're hiring an Aerial Technician who will perform installation of strand and fiber optics, including aerial and underground construction maintenance of pole lines and associated support infrastructure. What You'll Do: • Plan and execute fiber installation projects, both aerial and underground • Install, maintain and repair fiber optic cables that are strung on utility poles or aerial infrastructure • Operate equipment used for fiber optic cable aerial construction, including but not limited to aerial bucket trucks, lashers, drills, and aerial hand tools • Anchor installations • Other duties as assigned What We're Looking For: CDL (Class - A) preferred but not required Must have a valid Driver's License and be insurable One to two years of experience in an Aerial Tech role or Lineman School Prior Aerial Lineman experience hanging strand and fiber/cable, placing brackets on utility poles, and experience with node/radio replacement Occasional travel out of town On call duties Ability to safely and efficiently climb poles Ability to work outdoors in varying weather conditions Location: Starting point is our office in Glendale, WI. Majority of work performed is in Southeastern WI and IL Benefits Include: Medical, Dental, Vision, Life, Short & Long-Term Disability, 401(k) with company match, generous PTO that starts accruing on your first day of employment, paid holidays, referral bonuses, and more. AA/EEO Drug Testing Employer

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Perform General Physical Activities. Perform various tasks assisting with the operation of the plant, including using hand tools, cleaning, washing, sweeping, and shoveling materials. Repair and Maintain Equipment. Assist co-workers in the servicing, repairing, and adjusting of various pieces of equipment throughout the plant. Inspect Equipment and Structures. Perform daily inspections and maintenance of plant equipment to ensure safe, reliable, and compliant operations that maximize production and minimize interruptions. Operate Vehicles and Equipment. Operate heavy construction equipment or similar types of cleanup loaders to assist with the plant's operation. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience in the aggregate or construction industry is preferred. Knowledge of Best Practices. Knowledge of general principles and practices of industrial maintenance, construction, or aggregate production is preferred. Flexibility. Must be able to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Mechanical Skills. Must have knowledge and experience with industrial tools, their uses, and maintenance. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts our daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health & Benefits. This position is covered by the Local 681 collective bargaining agreement. Full benefits package includes medical, vision, dental, prescription drug, mental health, pension, annuity, paid holidays and paid vacation. Compensation. The salary is prescribed by the applicable Local 681 collective bargaining agreement. Candidates will be placed according to the union contract salary scale between $37.58 to $39.53. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions.

Overview Pay: $27. 12 - $33. 90 Hourly Summary: Plant Maintenance installs, maintains, and repairs machinery, equipment, physical structures, and pipe and electrical systems in industrial establishments. Principal Duties and Responsibilities: Maintenance Duties: • Visually inspect and test machinery and equipment • Listen for unusual sounds from machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine • Dismantle defective machines and equipment and install new or repair parts • Cleans and lubricates shafts, bearings, gears, and other parts of machinery • Lay out, assemble, install, and maintain water pipe systems and related hydraulic and pneumatic equipment, and repair and replace gauges, valves, pressure regulators, and related equipment • Repair and maintain physical structure of establishment using welders, cutting torches, hammers, chop saw, drills, wrenches, and impact guns • Operate cutting torch or welding equipment to cut or join metal parts • Fabricate and repair counters, benches, partitions, and other wooden structures • Responsible for the preventative maintenance for all the equipment in the plant, including building preventative maintenance, such as drives, belts, filters, and motors • Troubleshoot and replace defective electrical apparatus, such as switches, relays, motors, and electrical and electronic components of machinery equipment • Responsible for ordering and/or notifying the designated person to order the parts related to maintenance. • Minor repairs on forklifts, front-end loaders, tractors and trailers • Comply with all safety protocols, including lock out/tag out Global Responsibilities: • Regular attendance and physical presence at work is an essential function of this position • This job may require additional duties not listed above and the employee may be asked to perform those duties to meet business needs Qualifications: Education/Specialized Knowledge/Professional Certifications: • High School Diploma or equivalent required • Welding, cutting torch, and fabricating experience with metal required • Possession of a Class A or B CDL preferred • Basic electric wiring abilities preferred • Use of an air compressor, other power tools, and some minor construction equipment • Completion of a company DOT physical examination and applicable drug testing Experience: • Mechanical experience preferred Skills/Abilities: • Must be willing and able to climb up, and work at 100 feet above ground; such as on top of silos, or in a manlift bucket • Ability to communicate with multiple individuals, including management • Work independently and with the assistance of others • Familiarity with tools and how things work • Promote, demonstrate, and abide by all safety procedures Working Conditions: • Operation within a fast-paced environment • Exposed to moving mechanical parts, vehicles, heavy construction equipment, toxic or caustic chemicals, and outside weather conditions • Noise level is usually moderate, but can be high and requires personal hearing protection on occasion at job sites, plants and laboratories-proper usage of PPE for certain jobs may be required • Must be able to work through stressful situations while maintaining professionalism and composure • Travel required Physical Requirements: • Regularly required to talk or hear; frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms • Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl • Must be able to stand and move about job sites with uneven and unpaved ground while managing concrete delivery onsite • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus • Must be able to frequently bend in order to obtain samples from stockpiles or ground, climb ladders with buckets of admixtures, and push wheelbarrows of concrete • Must be able to operate buttons, levers, and other controls located on various equipment • Must be able to work long and flexible hours as necessary • Must be able to maneuver in and around our plants, yards and jobsites as necessary • Lift/Carry up to 55 pounds frequently • Lift up to 100 pounds occasionally Benefits Information: In alignment with our Bargaining Agreement, we are proud to partner with our Union representatives to provide a benefits package that is both competitive and tailored to meet the needs of our employees and their families. These thoughtfully designed plans typically include: • Health Insurance - Supporting your overall wellness. • Dental and Vision Coverage - Ensuring comprehensive care for you and your loved ones. • Voluntary Benefits - Helping you to cover unexpected expenses. • Retirement Plans - Helping you prepare for a secure and peaceful future. • Paid Time Off and Holiday Pay - Giving you time to recharge and enjoy life's moments. At Ozinga, we believe in creating a workplace where every co-worker feels valued and supported. Join us and experience the difference of working for a company that truly cares! Ozinga is an Equal Opportunity Employer. We consider applications for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, sexual orientation, citizenship status, genetic information, or any other legally protected status.

Reporting to: Damen Winters We are seeking a skilled Maintenance Technician who will be responsible for performing routine maintenance and emergency repairs at our various plants. The Tech will service plant equipment, troubleshoot and repair mechanical issues and work to ensure minimal downtime. This role requires a strong mechanical aptitude, attention to detail, excellent communication and a commitment to safety. At times the Tech will work independently and at times will work with other members of the maintenance or operations department. Roles & Responsibilities Key Responsibilities: * Perform routine maintenance and inspections on ready mix plants and plant equipment including but not limited to, mixers conveyors and batching equipment * Troubleshoot and repair mechanical, electrical and pneumatic issues to ensure optimal plant operations * Conduct preventative maintenance to minimize equipment failures and downtime * Maintain accurate records of maintenance activities including repairs made and parts used * Ensure compliance with safety regulations and company policies during all maintenance activities * Collaborate with Maintenance Manager, Plant Manager, Operations Manager and other team members to prioritize and schedule maintenance tasks * Assist with installation and commissioning of new equipment as necessary * Identify hazards and maintain clean and organized working areas Qualifications: * 3 years of experience in plant maintenance, preferably in the concrete or construction industry * Strong mechanical, electrical and pneumatic troubleshooting skills * Knowledge of ready mix plant operations and equipment * Ability to read and interpret technical manuals and schematics * Excellent problem-solving skills and attention to detail * Ability to work independently with minimum oversight and ability to work as a team * Strong communication skills * Ability to work in various weather conditions * Valid driver's license * Ability to work flexible hours, including early mornings, late evenings and weekends as needed * Fundamental knowledge of welding is a plus Physical Requirements: * Must wear all appropriate PPE (hard hat, safety glasses, gloves, ear protection, masks, seat belt and steel toe boots) when performing safety sensitive duties or in certain areas of plant. If work requires driving in company vehicle or personal vehicle, seat belt must be worn while vehicle is in motion * Requires working in extreme weather; temperatures sometimes above 90 degrees, sometimes cold, wet or damp conditions * Requires walking on terrain that may be uneven, muddy and slippery * Exposure to sounds and noise levels that may be distracting or uncomfortable * Exposure to diesel exhaust, dust, and water mist or vapor. * Variable lighting conditions, dependent upon available natural light * Must be able to lift and carry objects weighing 30 - 50 pounds * Walk, stand, climb stairs and ladders, crouch/squat * Must be able to read and understand equipment installation instructions, technical specifications and or architectural drawings and be able to follow steps to properly and safely install carious types of equipment used in the production of ready mix concrete. This includes but is not limited to air compressors, hydraulic and pneumatic pistons, valves, and gates, conveyors, radial stacker conveyors, screw conveyors, weigh batchers and scales, various motors, drives, gears and pulleys, breakers and switchgears, miscellaneous steel components * Must be able to use reason and understanding to troubleshoot and repair issues with plant equipment in a manner that will safely resolve issues This position description is a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks and duties. The responsibilities, tasks and duties of the jobholder might differ from those outlined in the job description and other duties, as assigned, might be part of the job. Benefits * Recession Resistant Industry * Consistent work, with a work/life balance * Overtime Opportunities * Paid Holidays * Paid Time Off * 401(k) Plan w/ employer match contribution * Medical / Dental / Vision plan offered * Life Insurance - Company Paid * Short-term / Long-term Disability Insurance - Company Paid * Employee Stock Purchase Plan (ESPP) - Optional Get Hired What to Expect During our Hiring Process * Background Check * Motor Vehicle Record Check * 5-Panel Drug Screen * Fit for Duty Baseline Physical (if applicable) * Paid Orientation * A great team to support you throughout your career with Summit Materials companies! Build a Lasting Career with us. Begin Here. Go Anywhere. Apply now! Summit Materials consists of more than a dozen local companies that supply aggregates, cement, ready-mix concrete, asphalt paving, and construction services in the United States and western Canada. At Summit Materials, we support our teammates who lay the groundwork for our communities and live by our core values: Safety, Integrity, Sustainability, and Inclusivity. We'repassionate about our teammates, our work, and our communities. Each of Summit's companies celebrates their individual legacies, but together - we are Summit Materials. At Summit Materials, we provide the foundation to connect our communities today and build a better tomorrow. We value all our communities - including our diverse internal community of teammates that make us stronger. No matter your race, ethnicity, gender, age, or anything that makes you who you are...you belong. #INDKT Req #: 2327

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Promote Safety. In accordance with MSHA and Vulcan standards, take an active role in prioritizing safety throughout the operation for yourself and others at all times. Perform General Physical Activities. Perform a variety of tasks assisting with the operation of the plant, including using hand tools, cleaning, washing, sweeping, and shoveling materials. Repair and Maintain Equipment. Assist co-workers in servicing, repairing, and adjusting various pieces of equipment throughout the plant. Inspect Equipment and Structures. Perform daily inspections and maintenance of plant equipment to ensure safe, reliable, and compliant operations that maximize production and minimize interruptions. Operate Vehicles and Equipment. Operate heavy construction equipment or similar types of cleanup loaders to assist with the plant's operation. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience in the aggregate or construction industry is preferred. Knowledge of Best Practices. Knowledge of general principles and practices of industrial maintenance, construction, or aggregate production is preferred. Flexibility. Must be able to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Mechanical Skills. Must have some knowledge of industrial tools, their uses, and maintenance. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy regarding the use of temporary staffing agencies, placement services, and professional recruiters.

Plant Maintenance-2nd Shift Reports To: Plant Manager Summit Materials is looking for an experienced, hands-on Plant Maintenance Technician to support our quarry operations team. This position is responsible for providing stationary equipment maintenance, mechanical repairs, and minor fabrication. The ideal candidate will be mechanically inclined with the ability to solve problems under pressure. Daily functions may include preventative maintenance, changing bearings, replacing conveyor rollers, belts, shives, wire cloth and urethane screens; installing Flexco splices, clips, and super screws; rebuilding crushers and chutes. Benefits Benefits & Perks * Recession Resistant Industry * Consistent work, with a work/life balance * Overtime Opportunities * Paid Holidays * Paid Time Off * 401(k) Plan w/ employer match contribution * Medical / Dental / Vision offered the first of the month following start date * Life Insurance Company Paid * Short-term / Long-term Disability Insurance Company Paid How to Get Started * STEP ONE: Complete our online application (linked here) * STEP TWO: Be prepared to speak with one of our Recruiters, as they'll be reaching out to you soon. * STEP THREE: Keep an eye on your texts and emails, we'll use this to send you additional details, questions, and information pertaining to our hiring interview and selection process. Get Hired: What to Expect During our Hiring Process * Background Check * Motor Vehicle Record Check * DOT 5-Panel Drug Screen * Fit for Duty Baseline Physical * Paid Orientation * A great team to support you throughout your career with Summit Materials companies! Roles & Responsibilities ESSENTIAL DUTIES AND RESPONSIBILITIES * Preventative maintenance throughout the quarry and plant. * Problem solving when issues arise, under pressure. * Rebuilding parts of the stationary equipment, i.e., crushers, chutes, screens, etc. * Communicating with the leadership team to ensure proper operations decisions are made timely. * Welding, repair, and fabrication on rock crushing equipment associated with quarry operations. * Following all safety measures * Additional duties assigned by leadership. * Ability to perform repetitive and continuous functions, as necessary * Respond quickly to hazards of safety concerns. QUALIFICATIONS / REQUIREMENTS * High School diploma or GED * 3-5 years of related experience but does not have to be industry * Specific types of vision to include close, distance, peripheral, depth and ability to adjust focus. * Ability to respond quickly to hazards and safety concerns. #INDKT Req #: 1162

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. What You'll Do: Promote Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Perform General Physical Activities. Perform a variety of tasks assisting with the operation of the plant, including using hand tools, cleaning, washing, sweeping, and shoveling materials. Repair and Maintain Equipment. Assist co-workers in the servicing, repairing, and adjusting of various pieces of equipment throughout the plant. Inspect Equipment and Structures. Perform daily inspections and maintenance of the plant equipment in order to ensure safe, reliable, and compliant operations that maximize production and minimize interruptions. Operate Vehicles and Equipment. Operate heavy construction equipment or similar types of cleanup loaders in order to assist with the operation of the plant. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Previous experience in the aggregate or construction industry is preferred. Knowledge of Best Practices. Knowledge of general principles and practices of industrial maintenance, construction, or aggregate production is preferred. Flexibility. Must be able to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Mechanical Skills. Knowledge and experience with industrial tools, their uses, and maintenance preferred. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. The industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health & Benefits. This position is covered by the Local 150 collective bargaining agreement. Full benefits package including medical, vision, dental, prescription drug, mental health, pension, retiree benefits, paid holidays and paid vacation. Compensation. The salary is prescribed by the applicable Local 150 collective bargaining agreement. Candidates will be placed according to the union contract salary scale between $43.75 to $44.75. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions.

Job Title: Valve Technician Job Type: Full-Time | Onsite Industry: Oil & Gas / Manufacturing About the Role: We are looking for a motivated and hard-working Valve Technician to join our team in Conroe, Texas. In this hands-on role, you will be responsible for the teardown, repair, new assembly, calibration, and diagnostics testing of frac valves. The ideal candidate is mechanically inclined, safety-conscious, and thrives in a fast-paced environment. Key Responsibilities: Calibrate, test, and troubleshoot valves and related instruments. Assemble new and repaired equipment to meet quality standards. Document repair, testing, and assembly activities including failure analysis, parts used, and labor hours. Perform inventory control tasks such as stocking, pulling parts, and cycle counting. Communicate with customers for technical support, troubleshooting, and repair quoting. Disassemble, clean, and evaluate parts for reuse or replacement. Prepare surfaces and paint assemblies and parts. Stamp and tag nameplates accurately. Package and ship parts, including crating when necessary. Conduct final inspections and complete inspection reports. Sign and document compliance sheets. Follow all safety protocols and company regulations. Maintain a clean and organized work area. Support other team members and perform additional duties as assigned. Qualifications: 1-3 years of experience in a related mechanical or industrial role. Experience operating forklifts and overhead cranes. Basic computer skills for documentation and communication. Employee Benefits: Competitive hourly wage with overtime opportunities Health, dental, and vision insurance 401(k) retirement plan with company match Paid time off (PTO) and holidays Opportunities for training and career advancement Employee assistance program (EAP) Team-oriented work environment Core Values: Safety People Integrity Quality Dedication AWC Indeed is an Equal Opportunity Employer.

With 7 facilities covering 21 states, Pioneer services industrial equipment for the power, chemical, petrochemical, pulp & paper, food & beverage, and pharmaceutical industries. The industrial equipment Pioneer services include Pressure Relief Valves (PRVs), Control Valves, Line Valves, Instrumentation, Pumps, Blowers, Mechanical Seals, and Fluid Sealing applications. Valve repair has been a cornerstone of Pioneer's business for over 34 years and continues to grow. A Valve Technician would perform the essential duties of new valve assembly and valve repair / certification of various types of valves both in shop and onsite at customer facilities. Pioneer provides in house training along with factory supplemented training. Pioneer provides great potential for upward growth. Responsibilities and Duties: Follow all Pioneer Safety and Quality procedures and regulations Operate equipment - overhead hoists, sand blaster, parts washer, propylene torch, etc. Disassemble valve without damaging parts per the manufacturer's Installation & Operation Manual Document and enter job data into ValvKeep database and document photos Coordinate with office personnel on repair requirements Maintain a clean and organized work area Maintain equipment in area, as required Cleaning, blasting, and painting valve components Return Valves/Parts to Proper Bins, Boxes, etc. Assemble, calibrate, tag and certify valve per manufacturer's repair manuals May be required to help in field assignments May be required to climb and work at various elevations depending on job scope Operate motor vehicle, as required Attend job and safety training, as necessary or required Requirements and Qualifications: High school diploma or GED. Desire a technical or trade school degree. The right candidate will the ability to learn our trade and has experience working hand and power tools. Required skills: Safe Working Attitude Attention to detail Basic computer knowledge Desired skills: Organized and effective time management skills Concise communication skills The right employee exemplifies: A Positive attitude A Punctual disposition Initiative and is always looking for work during down moments Good integrity and dutifulness Adaptiveness to a constantly changing schedule Attentiveness to surroundings Must be able to travel and have a clear driving record in accordance with Pioneer driving guidelines Capable of holding forklift operation certificate Physical abilities Must be able to lift max of 50 lbs Must be able to work in hot and cold environments

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. About the Job: The Plant Maintenance Technician is responsible for maintaining site reliability by performing high-quality inspections, troubleshooting basic preventative maintenance (PM) tasks, and executing routine maintenance with no supervision. This role includes replacing basic components and assisting in minimizing unplanned downtime through proactive maintenance efforts. What You'll Do: * Other Requirements: * Critical Competencies: * Repairing and Maintaining Mechanical Equipment: Ability to independently perform routine maintenance and component changes * Monitoring Processes, Materials, or Surroundings and Troubleshoot: Detail-oriented approach to inspections and identifying potential failures * Making Decisions and Solving Problems: Strong troubleshooting skills for basic mechanical and operational issues * Communication and Collaboration: Effective collaboration with team members to support plant operations * Evaluating Information to Determine Compliance with Standards: Dependable, safety-conscious, and able to work effectively within a team * Proactiveness: Proactive mindset in minimizing unplanned downtime and improving reliability Skills You Need: Education: * High School diploma or equivalent required. Experience: * Minimum of 1 year of experience in operations, preferably within the aggregate industry. Knowledge, Skills, and Abilities: * Strong understanding of plant operations and maintenance requirements * Proficiency in conducting thorough inspections of all site areas * Ability to troubleshoot and resolve basic PM and maintenance issues * Knowledge of component replacement and its impact on plant performance What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. The does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. The Company may at any time, in its sole discretion, modify or vary from anything stated in this job description, with or without notice.

With 7 facilities covering 21 states, Pioneer services industrial equipment for the power, chemical, petrochemical, pulp & paper, food & beverage, and pharmaceutical industries. The industrial equipment Pioneer services include Pressure Relief Valves (PRVs), Control Valves, Line Valves, Instrumentation, Pumps, Blowers, Mechanical Seals, and Fluid Sealing applications. Valve repair has been a cornerstone of Pioneer's business for over 34 years and continues to grow. A Valve Technician would perform the essential duties of new valve assembly and valve repair / certification of various types of valves both in shop and onsite at customer facilities. Pioneer provides in house training along with factory supplemented training. Pioneer provides great potential for upward growth. Responsibilities and Duties: Follow all Pioneer Safety and Quality procedures and regulations Operate equipment - overhead hoists, sand blaster, parts washer, propylene torch, etc. Disassemble valve without damaging parts per the manufacturer's Installation & Operation Manual Document and enter job data into ValvKeep database and document photos Coordinate with office personnel on repair requirements Maintain a clean and organized work area Maintain equipment in area, as required Cleaning, blasting, and painting valve components Return Valves/Parts to Proper Bins, Boxes, etc. Assemble, calibrate, tag and certify valve per manufacturer's repair manuals May be required to help in field assignments May be required to climb and work at various elevations depending on job scope Operate motor vehicle, as required Attend job and safety training, as necessary or required Requirements and Qualifications: High school diploma or GED. Desire a technical or trade school degree. The right candidate will the ability to learn our trade and has experience working hand and power tools. Required skills: Safe Working Attitude Attention to detail Basic computer knowledge Desired skills: Organized and effective time management skills Concise communication skills The right employee exemplifies: A Positive attitude A Punctual disposition Initiative and is always looking for work during down moments Good integrity and dutifulness adaptiveness to a constantly changing schedule Attentiveness to surroundings Must be able to travel and have a clear driving record in accordance with Pioneer driving guidelines Capable of holding forklift operation certificate Physical abilities Must be able to lift max of 50 lbs Must be able to work in hot and cold environments