Post job

Maintenance Technician jobs at Uline

- 7431 jobs
  • Maintenance & Reliability Supervisor III

    Avantor 4.6company rating

    Carpinteria, CA jobs

    The Opportunity: Avantor is seeking a Maintenance and Reliability Supervisor to oversee facility maintenance activities. The Maintenance Supervisor's work involves complete maintenance control over designated areas and they will report to the Reliability Maintenance Engineering Manager. This is a full-time position based out of our Carpinteria, CA office with occasional travel to support other sites as needed. What we're looking for: Education: HS diploma or equivalent degree. A degree in mechanical, instrument/electrical, or another relevant discipline (preferred). Experience: Minimum of 5 years' experience in facility maintenance. Certifications: Certification in Reliability (CRL, CMRP, etc.) desired. Additional Qualifications: Must understand the RCM process, Failure Mode Identification, Defect Analysis, Cause and Effect Analysis, Loss Elimination, use sFMEA, RCFA Decision Logic, and FRACAS. Must understand ISO 55000 Asset Management. Expertise in CMMS best practices. Full understanding of strategic maintenance planning and scheduling activities Management and leadership skills. Budget planning skills. Good communication and reporting skills. Ability to communicate/teach/coach reliability best practices, condition monitoring, and precision methods. How you will thrive and create an impact: Supervise and ensure the safety of Maintenance employees. Oversee all maintenance activities in their area of the facility. Perform routine and turnaround maintenance and plant modifications. Evaluate and analyze products, components, materials, and equipment for the purpose of understanding and predicting failures. Review product designs, material specifications, and manufacturing capability to predict reliability and dependability. Create prototypes and conduct product tests to gather reliability data. Interpret test results and recommend solutions using appropriate statistical distributions and reliability models. Recommend product design changes or alterations in manufacturing processes and controls to ensure achievement of required reliability levels. Monitor production equipment diagnostics and review maintenance record in order to predict and prevent equipment down times. Document findings, including results of root cause analysis, and facilitate the implementation of necessary changes to ensure product and/or equipment reliability levels are maintained. May determine maintenance requirements and schedules for products and equipment. Ensure maintenance resources provide an effective, efficient, and cost-effective execution of maintenance schedules across the work area. Manage the area maintenance budget. Account for the maintenance functions in their area and take necessary action to ensure that key performance targets are met. Ensure that workforce is allocated to areas of responsibility in the most effective manner. Ensure supervisory support is provided to carry out Weekly, Daily, and Shutdown Schedules. Monitor key performance indicators (KPIs) and take appropriate corrective action. Approve purchase requisitions for direct purchase of materials promptly. Monitor execution of best practices to ensure compliance and take appropriate corrective action as necessary (with Operations Management). Follow up on Root Cause Analysis (RCA) recommendations to ensure corrective actions are taken promptly (with Operations Management). Define priorities for the area (with Operations Management). Define and update the 12-Month and 8-Week Event Schedules (with Operations Management). Identify work (early) to be done during scheduled shutdown events. Identify appropriate goals and objectives for each shutdown. Other duties as assigned. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $85,000.00 - $141,600.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ****************************** and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights poster. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.
    $85k-141.6k yearly 2d ago
  • Electrical Technician

    Lincoln Electric 4.6company rating

    Plymouth, MI jobs

    Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $27 - $31.50 Target Bonus: 5.0% Req ID: 26585 Job Responsibilities • Repair and replace defective parts in generators, motors, controllers, switchboards, switches, conductors and other electrical fixtures. • Install, maintain and repair electro-mechanical, electrical, and electronic components. • Wiring motor power controls equipment circuits, reading and interpreting blueprints, wiring diagrams and schematics. • Testing wire connections with test equipment using multi-meters and oscilloscope. • Assemble junction boxes, back plates and harnesses per print. • Work closely with engineers and general contractors. • Travel as required. • Participate in ISO training and audits. • Any other assignments as deemed appropriate Job Requirements •High School diploma or equivalent is required. A Technical degree is a plus. 2 - 3 years of hands-on electrical experience working on a plant floor is preferred. • Ability to identify and implement efficient paths of action to finish assigned work • Should be able to test, calibrate, diagnose and repair various devices • Must be able to read and follow blueprints • Must be able to communicate clearly, articulately and professionally • Must have appropriate schedule flexibility, sense of urgency, motivation and versatility to make a substantial contribution to the organization's success • Ability to interact positively and constructively with all RedViking team members while representing company in a professional manner • Willingness to work “above and beyond” in order to meet company goals • Ability to travel to other company sites as well as customer sites as required • Well organized, detail oriented and self-motivated • Must have excellent time management skills • Must have excellent oral and written communication skills Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
    $27-31.5 hourly 5d ago
  • Maintenance Technician -- Third Shift

    Lincoln Electric 4.6company rating

    Mason, OH jobs

    Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mason Employment Status: Hourly Full-Time Function: Maintenance Pay Range: ($49,427.00 - $74,140.00) Target Bonus: % Req ID: 25900 Job Responsibilities Summary of Position: Maintenance Technicians will repair/maintain all production/facility equipment and perform project work. This position requires a high regard for safety at all times in performing any tasks associated with working for Harris Products Group. This person will work safely and supports safety within their team across the organization. Completes weekly maintenance schedule and makes safe, quality & timely repairs to ensure weekly production schedule is completed. Supports lean initiatives to facilitate team goals/metrics. Participates in team meetings and works on cost savings projects. Responsibilities: Completes weekly maintenance schedule Performs preventative maintenance on equipment Schedule repairs of equipment Performs fabrication, pipe fitting, welding, brazing & soldering Operates material handling equipment, scissor lift and manipulating man lift when needed Works on team projects, Six Sigma projects and provides support for other team meetings and projects. Correctly fills our work orders and time sheets Job Requirements Education and Experience: Required - High school diploma or general education degree (GED); and one to two years related experience and/or training; or equivalent combination of education and experience. Good trouble shooting skills in mechanical and pneumatic systems for production machinery and support equipment. Able to read and understand mechanical and pneumatic prints Must be computer literate Operate material handling equipment, scissor lift and manipulating man lift Preferred- Experienced in welding, fabricating and pipe fitting. Experience with Lean tools Able to read and understand electrical, mechanical, hydraulic, and pneumatic prints Understand ladder logic for relays and PLCs Familiar with Allen Bradley PLCs, SLC, Micro Logix and Control Logix Familiar with Logix 500, Logix 5000 and RSLinx Familiar with operation of HMIs (touch screens) Be able to install and set up AC & DC drives Familiar with NEC as applies to Industrial applications Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
    $49.4k-74.1k yearly 4d ago
  • Machinist Maintenance

    Lincoln Electric 4.6company rating

    Euclid, OH jobs

    Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
    $47k-57k yearly est. 4d ago
  • Mechanical Technician

    Lincoln Electric 4.6company rating

    Shelby, MI jobs

    Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $21.39 - $30.56 Target Bonus: 5.0% Req ID: 26164 Job Responsibilities On-site support for mechanical installation, de-bug, and final buyoff to customer specifications relative to Fori Automation equipment. Lead/direct, as required, plant personnel during debug/start-up of machines to verify mechanical machine functionality is correct and complete. Assist service manager and other departments to answer product related technical questions from customer. Assist in local and non-local service calls and installations. Train customer personnel on machine functionality and proper start-up and debug of our standard machines. Review checklist and open issue list prior to installation to assure the service technician(s) are lined-up. Assist with our standard manuals to develop a more technically complete and user-friendly service manual. Participate in meeting as required with the project manager and department supervisors to line-up installation plans and review all open-issues prior to shipment. Create and develop improvement ideas and review with managers for approval and implementation. Communicate with customers while on site to give updates to objectives. Write service work orders and job site status reports. Supervise mechanical installation, de-bug, and buyoff activities at customer locations. Coordinate necessary resources for installations, focusing on kits, warranty, etc. Document changes to Fori equipment on prints and return updates to appropriate engineering department. Work with site manager to assure proper flow of daily activities at customer locations. Hands on for installations/service calls/warranty. Job Requirements Machine Builder or equivalent required. 8 years as a Machine Builder on Automation Machines. 5 years of de-bugging and installing new machines. Willing to travel to Support Installations and service calls (on-call 24/7 while on installs). Microsoft Office/Excel capabilities. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
    $21.4-30.6 hourly 2d ago
  • Sr. Maintenance Technician

    Lincoln Electric 4.6company rating

    Gainesville, GA jobs

    Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Maintenance Pay Range: ($53,381.00 - $80,071.00) Target Bonus: % Req ID: 27629 Job Responsibilities Job Requirements Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
    $53.4k-80.1k yearly 3d ago
  • Facilities Technician

    Lincoln Electric 4.6company rating

    Euclid, OH jobs

    Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27865 Summary Position Overview The Facilities Engineering team within Cleveland Operations is responsible for planning, maintaining, and improving the infrastructure that supports our office, laboratory, and manufacturing environments. Our work ensures that every space operates safely, efficiently, and in alignment with organizational goals. As a Facilities Engineering Technician, you will play a key role in executing facility projects and supporting day-to-day operations. You'll collaborate with project managers and engineers to implement improvements, manage construction activities, and coordinate logistics such as relocations and contractor oversight. This position offers a hands-on opportunity to contribute to the reliability, safety, and functionality of our facilities while driving continuous improvement across all areas. Job Duties and Responsibilities Key Responsibilities: Assist project managers and engineers with construction activities, safety initiatives, and process improvements. Communicate construction plans to stakeholders and occupants, including details on temporary relocations, utility disruptions, construction zones, access changes, and noise mitigation strategies. Collaborate in a hands-on team environment to implement facility improvements, upgrades, and modifications. Promote and support Environmental, Health, and Safety (EHS) initiatives to maintain a safe and compliant workplace. Manage small to medium-sized projects and assist with capital projects under limited supervision. Provide support to other Facilities Team members as needed. Independently prioritize and complete office-related requests from internal customers. Assemble office furniture and workstations (e.g., desks, tables, filing cabinets, chairs) as required for projects. Operate or develop proficiency in facility equipment (e.g., forklifts, pallet jacks) for material handling tasks. Typical Assignments: Develop layouts and budgets for office, lab, or factory projects. Supervise and coordinate contractors during construction activities. Oversee completion of punch list items and ensure final occupancy readiness. Coordinate moves and project closeout activities. Source materials and products for facility projects. Address safety, environmental, and ergonomic concerns. Manage equipment removal, modification, and installation. Conduct contractor safety orientations. Perform additional tasks assigned by the supervisor. Basic Requirements Vocational Training and 5+ years' experience required; or GED with 7+ years in related field. (but does not require a university degree). Level IV; Vocational Training and 8+ years' experience required; or GED with 10+ years in related field. (but does not require a university degree). Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Has advanced and specialized expertise, typically developed through a combination of job-related training and considerable work experience in construction May act as a lead, coordinating and facilitating the work of others but is not a supervisor Works autonomously within established procedures and practices Capable of performing hands-on work as required Demonstrated experience with MS Office tools including Word, Excel, and PowerPoint Experience with AutoCAD preferred. Ability to work independently or as part of a team Demonstrate good judgment and make good decisions Self-motivated, and safety conscious Strong organizational skills Ability to handle a variety of assignments and changing priorities Good computer skills Strong written and oral communication skills Ability to occasionally work overtime, off shifts and between facilities in Northeastern Ohio Ability to be effective working extensively in any area with employees or contractors. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
    $43k-57k yearly est. 5d ago
  • Electrical Technician

    Lincoln Electric 4.6company rating

    Coldwater, OH jobs

    Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $27.44 - $35.48 Target Bonus: 5.0% Req ID: 27362 Summary Lincoln Electric Automation, a global leader in automated manufacturing solutions, is seeking a skilled and motivated Electrician to join our Coldwater, OH team. This hands-on role combines technical expertise in panel assembly and electrical machine wiring, ensuring that complex automation projects are delivered on time, at the highest level of quality. At Lincoln Electric, we offer more than just a job - we provide long-term career growth, technical development, and the opportunity to work on cutting-edge automation projects. Employees enjoy a competitive compensation package, bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, comprehensive medical/dental/vision benefits, retirement plans, and more. What You Will Do Interpret developmental blueprints, wiring diagrams, and technical documentation. Assemble electrical panels using basic hand and power tools with precision and quality. Troubleshoot and solve problems independently and in a team environment. Coordinate and manage projects of varying scope and complexity from start to finish. Collaborate effectively with suppliers, customers, engineers, management, and support functions to achieve project success. Lead and direct team members to ensure tasks are completed efficiently. Complete and maintain project-specific checklists and documentation. Manage jobs involving multiple employees while maintaining timelines and quality standards. Travel as required for equipment installation, commissioning, and service support. Estimated about 25% Required Experience & Education High School Diploma, GED, or equivalent experience required. Minimum of 5+ years of relevant experience preferred. Ability to operate a forklift safely and efficiently. Strong shop math skills and ability to apply them to daily tasks. Proven commitment to company values and quality standards. Educational, training, and experience requirements may be modified at the Management Team's discretion. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
    $27.4-35.5 hourly 4d ago
  • Maintenance Technician II - UniFirst

    Unifirst 4.6company rating

    Lubbock, TX jobs

    Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
    $37k-55k yearly est. Auto-Apply 2d ago
  • Maintenance Technician I - UniFirst ($1,000 Sign On)

    Unifirst 4.6company rating

    Kansas City, MO jobs

    New Hire Incentive Bonus! UniFirst's Kansas City, MO location is now offering an incentive bonus for $1,000 new hires. The following guidelines must be met to be eligible: New hire must reach 90 days of employment to receive the full incentive bonus. New hire must abide by UniFirst's 90-Day Probationary Period. This includes meeting UniFirst's attendance and performance policy. New hire must not have been previously employed by UniFirst. Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. The estimated hourly pay for this position ranges from $31.00 to $34.00 per hour. Actual compensation will vary based on factors including but not limited the candidate's skills, experience, and qualifications. Geographic differentials may apply depending on the position's location. There is no application deadline for this role; recruitment will remain open until the position is filled. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
    $31-34 hourly Auto-Apply 1d ago
  • Maintenance Technician II - UniFirst

    Unifirst 4.6company rating

    Melrose Park, IL jobs

    Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. Compensation: $28.11 - $34.00 hourly pay What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
    $28.1-34 hourly Auto-Apply 5d ago
  • Maintenance Technician I - UniFirst

    Unifirst 4.6company rating

    Melrose Park, IL jobs

    Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training Compensation: $26.67 - $29.00 hourly pay What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
    $26.7-29 hourly Auto-Apply 5d ago
  • Maintenance Technician II - UniFirst

    Unifirst 4.6company rating

    Orlando, FL jobs

    Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
    $38k-58k yearly est. Auto-Apply 4d ago
  • Maintenance Technician II - UniFirst

    Unifirst 4.6company rating

    Pompano Beach, FL jobs

    Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
    $35k-53k yearly est. Auto-Apply 1d ago
  • Maintenance Technician II - UniFirst

    Unifirst 4.6company rating

    Phoenix, AZ jobs

    Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Knowledgeable in industrial maintenance of facilities and equipment. Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Valid driver's license and a safe driving record are required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
    $35k-52k yearly est. Auto-Apply 4d ago
  • Maintenance Technician I - UniFirst

    Unifirst 4.6company rating

    Corpus Christi, TX jobs

    Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer's instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school diploma or GED equivalent required. Two-year technical degree in an appropriate background is preferred. Must be at least 18 years of age. Valid driver's license and a safe driving record are required. Knowledgeable in maintenance equipment. Minimum of 6 months' work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst's maintenance knowledge assessment test to be eligible for employment. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws
    $35k-52k yearly est. Auto-Apply 3d ago
  • Fleet Technician - UniFirst ($500 Sign On)

    Unifirst 4.6company rating

    North Canton, OH jobs

    New Hire Incentive Bonus! UniFirst's North Canton, OH location is now offering an incentive bonus of $500 for new Fleet Technician hires. The following guidelines must be met to be eligible: New hire must reach 180 days of employment to receive the full incentive bonus. New hire must abide by UniFirst's 90-Day Probationary Period. This includes meeting UniFirst's attendance and performance policy. New hire must not have been previously employed by UniFirst. Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Fleet Technician to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be responsible for carrying out all corrective, preventative, and predictive maintenance on fleet vehicles to ensure the safe, efficient, and reliable operation. In addition, you will be responsible for maintaining fleet vehicles in a safe working condition meeting DOT or other regulatory requirements. At UniFirst we have a standard Monday - Friday work week with periodic and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: Ensure all assigned vehicles are properly registered and compliant with current plates, inspections, and documentation. Complete all scheduled preventative maintenance to minimize downtime and maintain fleet performance. Perform corrective and predictive maintenance to ensure vehicles are in safe, roadworthy condition and meet DOT and other regulatory standards. Maintain vehicle appearance to align with UniFirst branding and cleanliness standards. Keep the garage clean, organized, and safe; source parts and monitor pricing for cost-effective, high-quality repairs. Accurately track and manage maintenance tasks using a Computerized Maintenance Management System (CMMS). Perform additional tasks as directed by leadership to support overall fleet operations. Qualifications What we're looking for: High school diploma or GED preferred. Must be at least 21 years old. Associate's degree from an accredited technical school or equivalent experience preferred. Valid driver's license and clean driving record required. Must meet all DOT regulatory requirements. CDL license is a strong plus, preferred for performing road tests and servicing Class A vehicles Strong diagnostic skills with GM drivability; diesel experience is a plus. Willingness to work overtime and perform occasional road calls. 3 - 5 years of hands-on experience with medium to heavy-duty vehicle repair, including: Preventative Maintenance, tire & wheel service, air & hydraulic brake systems, drivetrain and suspension, electrical and A/C systems computerized diagnostics. Proficiency with diagnostic software and basic computer skills Ability to lift up to 80 lbs. safely About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team.
    $47k-65k yearly est. Auto-Apply 2d ago
  • Maintenance Supervisor - UniFirst

    Unifirst 4.6company rating

    Garden City, KS jobs

    Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Supervisor to join our UniFirst community! As the Maintenance Supervisor you will ensure all facility equipment is efficiently functioning and identify areas to improve processes, procedures, maintenance practices and on-going training for all maintenance staff. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. What's in it for you? Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. What you'll be doing: Diagnose mechanical and electrical problems and determine corrective action by checking blueprints, schematics, repair manuals and parts catalogs. Inspect, operate, and test machinery and equipment to diagnose machine malfunctions. Performing basic welding activities to effect repairs on facilities and equipment. Troubleshoot and repair Programmable Logic Controllers (PLC's) and associated control systems. Perform and assign all preventive maintenance on facility and production assets. Follow blueprints, schematics, operations manuals, manufacturer's instructions, and engineering specifications using a documented schedule. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Manage and assign all equipment maintenance, including repairs which cannot be completed during standard hours. Assume responsibility for all shifts in the maintenance department. Oversee and implement all maintenance related regulatory and environmental compliance requirements. Assume responsibility for all aspects of safety within the maintenance department. Perform Confined Space and Lockout / Tagout procedures where appropriate. Monitor training status of technicians and provide time for required training as needed. Utilize a Computerized Maintenance Management System. Partner with the Production Manager to develop, manage and maintain budget for building, equipment, capital expenditures and parts/labor. Train and develop maintenance partners. Perform other duties as assigned by leadership. Qualifications What we're looking for: High school and/or GED is preferred. Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age. Valid driver's license and a safe driving record are required. Must pass UniFirst's maintenance knowledge assessment to be eligible for employment. Knowledgeable in maintenance equipment. This includes wiring, electrical, mechanical, electronic components, pipe systems and plumbing required. Minimum of 3 years of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Minimum of 2 years of experience supervising maintenance personnel is preferred. Maintenance administration experience including planning, scheduling, budgeting, negotiating, parts management, vendor management, maintenance management systems is required. Ability to read blueprints and schematics is required. Ability to read and understand maintenance literature printed in English required. Proficiency in Microsoft Office skills is required. Experience in Hand & Power tools is required. Lockout / Tagout experience is required Ability to work overtime as needed is required. Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine's “Best Companies to Sell For” list and recognized on Forbes magazine's “Platinum 400 - Best Big Companies” list. As an 80-year old company focused on annual growth, there's never been a better time to join our team. There's a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.
    $49k-65k yearly est. Auto-Apply 1d ago
  • Technician

    Lincoln Electric 4.6company rating

    Mentor, OH jobs

    Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Mentor Req ID: 27824 Purpose To perform quality checks and other quality related tasks for the consumable division. Job Duties and Responsibilities Provides technical support to engineers and scientists in areas such as production, operations, maintenance, safety, testing, process improvement or product development. Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations. Must have an uncompromising attitude towards quality. Must thoroughly understand, enforce and follow the Lincoln Electric Quality Management System as it applies to all daily activities. Encouraged to initiate changes for continuous product and process improvement. Maintain manufacturing quality performance metrics and/or quality records. Assist with the evaluation, proper identification, and disposition of all non-conforming items and materials. Be aware of all products, documents, and process changes in your area of responsibility which affect quality. Utilize the Quality Management System and appropriate divisional personnel to support or drive Continuous Improvement Assist in the training and performance feedback of production personnel to production supervision. Develop and perform random process and product audits. Requirements Minimum 2 years of experience. Has full proficiency in a range of technical processes or procedures (or deep skills in a single area) through job-related training and considerable work experience. Completes a variety of atypical assignments. Works within defined technical processes and procedures or methodologies and may help determine the appropriate approach for new assignments. Works with a limited degree of supervision, with oversight focused only on complex new assignments. Acts as an informal resource for colleagues with less experience Completion of Lincoln Electric 6 Sigma Gray Belt online training or direct equivalent is highly desirable. Additional technical training in the Quality Assurance field or Root Cause Analysis is highly desirable. Ability to work rotating shifts. Demonstrated computer skills in MS Office and Windows operating system. Knowledge and understanding of divisional products & related processes. Basic knowledge of Lean principles, 5S, quality assurance tools, procedures, measurement techniques Ability to develop and maintain records and to follow projects through to conclusion. Excellent oral, written communication and people skills Excellent organizational skills to handle a constantly changing set of priorities with minimal supervision. Capable of frequent standing, walking, and lifting up to 60 lbs. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.
    $31k-40k yearly est. 2d ago
  • Electrical Maintenance Technician

    Trecora 4.2company rating

    Lawrence, KS jobs

    Are you an experienced Electrical Maintenance Technician looking to obtain a position in Lawrence, KS? Are you detail-oriented and enjoy working collaboratively with a team? We are looking for a motivated Electrical Maintenance Technician who can bring expertise and experience to our organization. This position will provide opportunities for you to fully utilize your skills, all while adding value to an exceptional company! The Company Trecora specializes in manufacturing high-purity hydrocarbons, specialty petrochemical products, and synthetic polyethylene waxes. In addition to our product lines, we offer custom processing services. We operate multiple facilities across the United States and are known for our strong safety culture, collaborative environment, and commitment to sustainable operations. Our headquarters is located in The Woodlands, TX. Why join Trecora Be part of a mid-sized, growing company where your work is visible and valued Work closely with operations, maintenance, engineering, and leadership Drive projects that directly improve safety, reliability, energy efficiency, and production Gain opportunity for professional growth in operations, engineering, or leadership roles Core values we live by: We foster an environment of respect, encouraging open and honest communication among all stakeholders We embrace a culture of continuous improvement and critical thinking, driving excellence through innovative solutions and a commitment to energy efficiency in everything we do We prioritize the well-being of our people, safeguarding the environment, and nurturing the communities in which we operate The Position Lay-out, assemble, install, test or repair, and calibrate pneumatic or electronic instrumentation. Able to troubleshoot, modify, install, run, and program all programmable plant equipment (PLCs, TDC, etc.) The maintenance electrician will be able to perform the following tasks with little or no supervision. Specific Job Responsibilities: Lay-out, assemble, and install electrical or instrumentation lines and equipment of all kinds from complex blueprints, diagrams, and rough sketches Program plant programmable equipment PLC's, TDC's, PC, etc Develop, perform, and conduct routine PMs on Plant Instruments, PLC's, DCS, and PC systems Troubleshoot Process Control Loops and take corrective measures Take active part in system upgrades for new and obsolete instrumentation Taking ownership for plant process reliability Initiate and follow through with process changes Troubleshoot electrical motors or motor systems, etc., and take corrective action Install and repair electrical control equipment including conduit, tray cable, etc Install and repair electric motors May guide other maintenance personnel as required on specific jobs Assist in the training of maintenance personnel Watch for any irregularities in the equipment operation, correct where possible and advise supervisor of defects needing attention Inspect, adjust, and calibrate instruments as scheduled and record pertinent information as required by ISO, PSM and MI programs Install, troubleshoot, and replace instruments of all kinds from complex blueprints, diagrams, and rough sketches Perform electrical work pertaining to instrument operations Ensure that production and housekeeping in assigned areas meet Good Manufacturing Practice Standards Follow all applicable safety requirements Comply with the requirements of the Lawrence Quality System Complete other job responsibilities as assigned and all jobs in a timely manner Minimum Qualifications Successful completion of Electrician Selection Process Two years industrial electrical experience required Minimum Qualifications for Senior Electrician Successful completion of Electrician Selection Process Four years industrial electrical experience Three years of instrumentation experience preferred ISA certification preferred not required Apply today and tell us why you would be a good fit for our Electrical Maintenance Technician position! Trecora is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, national origin, age, disability, genetics, status as a protected veteran, or any other protected status established by federal, state, or local laws.
    $58k-71k yearly est. 5d ago

Learn more about Uline jobs

View all jobs