Field Installation Technician jobs at Unwired - 237 jobs

Job DescriptionDescription: ESSENTIAL DUTIES & RESPONSIBILITIES Performs routine maintenance on high purity water treatment systems at customer facilities. (i.e. Changing filters, water testing, tank exchanges, ro membranes, uv lamps/sleeves) Remove and load media into backwashing vessels along with rebuilding control heads Diagnose and repair water treatment equipment Maintains effective, trusted working relationship with customers Uses safe work practices driving to and from the shop, and at customer sites Maintenance of accurate records and communication of all data collected at customer facilities Prepare and submit to customer and superiors, service reports detailing maintenance/equipment performance Participate in "on- call" rotation Requirements: MINIMUM QUALIFICATIONS At minimum, high school diploma or equivalent required, with 4 to 6 years industry-relevant experience Must have a strong mechanical aptitude Excellent verbal and written communication skills Proficient in Problem-solving Ability to manage and maintain confidential and proprietary information Good organizational skills Basic computer skills Self-motivated, results-oriented, organized and energetic Ability to understand instrumentation and controls Plumbing/Electrical experience preferred, but not required Excellent customer service skills Ability to lift without physical restrictions Valid driver's license and clean driving record PHYSICAL DEMANDS Physical Demands Lifting & Carrying-Regularly lift heavy equipment like water heaters, filtration units, pumps, and pipes (typically 50-100 lbs). Transport tools and materials in and out of work trucks and job sites. Manual Dexterity-Use a variety of hand and power tools-tightening fittings, cutting pipes, drilling, etc. Precision is key, especially when sealing joints or working in confined spaces. Bending, Kneeling & Crouching-Frequent squatting or kneeling to install systems under sinks, in crawl spaces, or basements. May have to maintain uncomfortable positions for extended periods. Climbing & Working at Heights-Climb ladders or stairs to access attics, roofs, or upper-floor plumbing systems. May need to balance while working on uneven surfaces. Standing & Walking-Long hours on your feet, often walking job sites or standing while installing equipment. Outdoor Exposure-Work in varying weather conditions-hot summers, cold winters, rain, snow-especially for outdoor or partially constructed building sites. Repetitive Motions-Repeated use of tools and similar motion patterns (tightening bolts, cutting, lifting) can take a toll on hands, wrists, shoulders, and back over time. Confined Spaces-Work in tight areas like under cabinets, crawlspaces, or utility closets, requiring agility and flexibility.

Full-time Description ESSENTIAL DUTIES & RESPONSIBILITIES Performs routine maintenance on high purity water treatment systems at customer facilities. (i.e. Changing filters, water testing, tank exchanges, ro membranes, uv lamps/sleeves) Remove and load media into backwashing vessels along with rebuilding control heads Diagnose and repair water treatment equipment Maintains effective, trusted working relationship with customers Uses safe work practices driving to and from the shop, and at customer sites Maintenance of accurate records and communication of all data collected at customer facilities Prepare and submit to customer and superiors, service reports detailing maintenance/equipment performance Participate in "on- call" rotation Requirements MINIMUM QUALIFICATIONS At minimum, high school diploma or equivalent required, with 4 to 6 years industry-relevant experience Must have a strong mechanical aptitude Excellent verbal and written communication skills Proficient in Problem-solving Ability to manage and maintain confidential and proprietary information Good organizational skills Basic computer skills Self-motivated, results-oriented, organized and energetic Ability to understand instrumentation and controls Plumbing/Electrical experience preferred, but not required Excellent customer service skills Ability to lift without physical restrictions Valid driver's license and clean driving record PHYSICAL DEMANDS Physical Demands Lifting & Carrying-Regularly lift heavy equipment like water heaters, filtration units, pumps, and pipes (typically 50-100 lbs). Transport tools and materials in and out of work trucks and job sites. Manual Dexterity-Use a variety of hand and power tools-tightening fittings, cutting pipes, drilling, etc. Precision is key, especially when sealing joints or working in confined spaces. Bending, Kneeling & Crouching-Frequent squatting or kneeling to install systems under sinks, in crawl spaces, or basements. May have to maintain uncomfortable positions for extended periods. Climbing & Working at Heights-Climb ladders or stairs to access attics, roofs, or upper-floor plumbing systems. May need to balance while working on uneven surfaces. Standing & Walking-Long hours on your feet, often walking job sites or standing while installing equipment. Outdoor Exposure-Work in varying weather conditions-hot summers, cold winters, rain, snow-especially for outdoor or partially constructed building sites. Repetitive Motions-Repeated use of tools and similar motion patterns (tightening bolts, cutting, lifting) can take a toll on hands, wrists, shoulders, and back over time. Confined Spaces-Work in tight areas like under cabinets, crawlspaces, or utility closets, requiring agility and flexibility. Salary Description hourly, non-exempt

This program requires US Citizenship Able to obtain Public Trust At a minimum, the Field Technician/Installer Jr Subcontractor personnel shall have the following skill/experience level: - A minimum of one year of experience of installing premises cabling systems, specifically CAT5 and CAT6 installation utilizing RJ45 connections - Installation of electronic equipment at customers facility. - High School diploma or equivalent experience/combined education with additional technical training equivalent to a technical associate's degree with a minimum of 1 - 3 years of relevant experience. - Works well under moderate supervision for routine task. - Ability to resolve Routine problems and issues, without clearly prescribed solutions. - Checks and makes minor adjustments to work methods to solve problems. - Communicates with colleagues and customer within own project/work area to obtain or provide information requiring some explanation or interpretation. - Has substantial understanding of job requirements and overall function. - Must be able to continuously travel to perform installations throughout CONUS. - Must have the ability to lift and carry forty pounds. - Ability to work in dim lighting. - Ability to follow installation instructions to the finest detail. - Must be able to obtain suitability and maintain a Public Trust background check. - Must have a valid driver's license. Additionally, the following skills(s) experiences are preferred: a) FAA Air Traffic Facility Knowledge b) Prior installation experience at FAA facilities **Position Details:** + Pay Rate / Range:$22-$29.13 _The above salary range represents the range expected for the position; however, final salary offers are based on a number of factors such as the position's responsibilities; the candidate's experience, education, and skills; location; travel required; and current market conditions._ + Benefits (Regular, Full Time Employees): + Medical, Dental, and Vision offerings + Weekly Direct Deposit + Paid Holidays and Personal Time Off + 401(k) with match + Voluntary Life and AD&D, Short / Long Term Disability, plus other voluntary coverages + Pre-Paid Legal and Employee Assistance Programs + Northwest Federal Credit Union Membership + BB&T @ Work Program **_ABBTECH is an EOE/Minorities/Women/Disabled Individuals/Veterans_**

Job Description OUR COMPANY: EOS IT Solutions is a global technology and logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of services are our top business priorities, along with investing in and supporting our partners and employees. We are a true international IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: As a Network Field Technician - Tier 2, you will support global deployment projects by installing, testing, and troubleshooting enterprise-grade network hardware and infrastructure. You'll work closely with Project Managers and Network Engineers to ensure seamless and timely rollouts of networking solutions at customer sites around the world. This role involves frequent international travel and hands-on technical execution in fast-paced environments. KEY RESPONSIBILITIES: Deploy and support network hardware including switches, routers, wireless access points, PDUs, and cabling systems (copper and fiber). Rack, stack, and cable equipment in compliance with data center and networking standards. Perform copper and fiber termination, testing, and troubleshooting to ensure optimal performance and adherence to specifications. Interpret network diagrams, port maps, and rack elevation drawings to execute deployments accurately. Assist in site readiness surveys including assessment of MDF/IDF power, cooling, and rack infrastructure. Conduct both pre- and post-installation Wi-Fi surveys using industry-standard tools. Collaborate with Network Engineers to support network implementation, issue resolution, and change requests. Document work completed, inventory used, and site conditions through comprehensive reporting. Maintain high quality and productivity standards while meeting strict project timelines. Uphold safety and operational protocols across various environments, including live data centers and construction sites. ESSENTIAL CRITERIA: 4+ years of hands-on experience in network deployments or field installations. Proficiency with enterprise networking hardware from major vendors (Cisco, Juniper, HPE, etc.). Strong understanding of cabling standards (Cat5e/6/6a, fiber types, patch panel management). Ability to interpret technical diagrams and Bills of Materials (BOMs). Strong troubleshooting skills for network connectivity and cabling issues. Excellent communication, organizational, and customer-facing skills. Comfortable lifting equipment up to 50 lbs and working in physically demanding environments. Must be available to work flexible hours, including evenings and weekends when needed. Must be willing and able to travel internationally on short notice. DESIRABLE CRITERIA: Certifications: CCNA, JNCIA, CompTIA Network+, or equivalent. Experience with wireless deployments and survey tools (Ekahau, NetAlly, etc.). Familiarity with structured cabling best practices, grounding, and labeling standards. Prior experience in enterprise, data center, or multi-site corporate environments. The EOS pay range for this job is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, experience, education, knowledge, skills, and abilities, as well as internal equity, market data, or other laws. EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor. #LI-CC1 Pay Range$34-$36 USD

OUR COMPANY: EOS IT Solutions is a global technology and logistics company, providing Collaboration and Business IT Support services to some of the world's largest industry leaders, delivering forward-thinking solutions based on multi-domain architecture. Customer satisfaction and commitment to superior quality of services are our top business priorities, along with investing in and supporting our partners and employees. We are a true international IT provider and are proud to deliver our services through global simplicity with trusted transparency. WHAT YOU WILL DO: As a Network Field Technician - Tier 2, you will support global deployment projects by installing, testing, and troubleshooting enterprise-grade network hardware and infrastructure. You'll work closely with Project Managers and Network Engineers to ensure seamless and timely rollouts of networking solutions at customer sites around the world. This role involves frequent international travel and hands-on technical execution in fast-paced environments. KEY RESPONSIBILITIES: Deploy and support network hardware including switches, routers, wireless access points, PDUs, and cabling systems (copper and fiber). Rack, stack, and cable equipment in compliance with data center and networking standards. Perform copper and fiber termination, testing, and troubleshooting to ensure optimal performance and adherence to specifications. Interpret network diagrams, port maps, and rack elevation drawings to execute deployments accurately. Assist in site readiness surveys including assessment of MDF/IDF power, cooling, and rack infrastructure. Conduct both pre- and post-installation Wi-Fi surveys using industry-standard tools. Collaborate with Network Engineers to support network implementation, issue resolution, and change requests. Document work completed, inventory used, and site conditions through comprehensive reporting. Maintain high quality and productivity standards while meeting strict project timelines. Uphold safety and operational protocols across various environments, including live data centers and construction sites. ESSENTIAL CRITERIA: 4+ years of hands-on experience in network deployments or field installations. Proficiency with enterprise networking hardware from major vendors (Cisco, Juniper, HPE, etc.). Strong understanding of cabling standards (Cat5e/6/6a, fiber types, patch panel management). Ability to interpret technical diagrams and Bills of Materials (BOMs). Strong troubleshooting skills for network connectivity and cabling issues. Excellent communication, organizational, and customer-facing skills. Comfortable lifting equipment up to 50 lbs and working in physically demanding environments. Must be available to work flexible hours, including evenings and weekends when needed. Must be willing and able to travel internationally on short notice. DESIRABLE CRITERIA: Certifications: CCNA, JNCIA, CompTIA Network+, or equivalent. Experience with wireless deployments and survey tools (Ekahau, NetAlly, etc.). Familiarity with structured cabling best practices, grounding, and labeling standards. Prior experience in enterprise, data center, or multi-site corporate environments. The EOS pay range for this job is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, experience, education, knowledge, skills, and abilities, as well as internal equity, market data, or other laws. EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We invite you to consider opportunities at EOS regardless of your gender; gender identity; gender reassignment; age; religious or similar philosophical belief; race; national origin; political opinion; sexual orientation; disability; marital or civil partnership status or other non-merit factor. #LI-CC1 Pay Range$34-$36 USD

SHELADIA Associates is a multi-disciplinary international professional consulting firm with demonstrated experience in the successful management and implementation of development projects worldwide. SHELADIA believes practicality and sustainability in development projects require flexible resource management, active participation of all stakeholders, and a shared goal of strengthening institutions and operational systems to optimize available resources. Equal Opportunity and Affirmative Action Employer. This position is contingent upon contract award Location: Rockville, MD / DMV area (specific location based on site/client office) We are seeking a skilled Structural Field Engineer (SFE) to provide vital technical support to structural maintenance teams. The successful candidate will establish and implement key processes to support maintenance operations and ensure adherence to engineering specifications and best practices. The SFE will play a critical role in guiding maintenance crews on proper methods, procedures, and materials selection while assisting in developing effective maintenance strategies. This position requires close coordination with program leadership and structural engineering teams to facilitate smooth execution of maintenance activities and to address any necessary adjustments in repair procedure. Job Description Provide technical support to structural maintenance crews, ensuring compliance with specifications, work instructions, and approved procedures Assist in developing maintenance strategies, including frequency, materials, and equipment selection Maintain logs of technical support activities and stay informed of maintenance plans, schedules, and safety regulations Support structural repairs such as track support, leak mitigation, drainage maintenance, and concrete patching Coordinate with structural engineers on new or revised repair procedures Monitor field maintenance activities and provide scheduling recommendations Analyze asset management data to guide maintenance frequency and type Recommend improvements to asset management and maintenance strategies Qualifications Bachelor's degree in Civil Engineering Minimum 5 years of experience in construction and preferably maintenance of major transit projects or similar infrastructure Proven experience with concrete and steel structures Ability to read and interpret plans, specifications, and repair procedures, and guide maintenance crews Ability to assist maintenance crews in selecting and deploying materials and equipment, including construction methods and techniques Strong ability to identify and address safety and quality concerns Effective coordination and communication skills with maintenance staff and stakeholders, with good interpersonal skills Experience in tunnel maintenance, including leak mitigation preferred Experience maintaining track-beds under direct fixation track, including track-bed and drainage cleaning and grout pad renewals preferred Experience with WMATA structural repairs preferred Familiarity with asset management databases such as Maximo and Optram, including incident analysis for maintenance planning preferred Additional Information Additional Information Proposed Salary: $90 - 125k annual Sheladia Associates, Inc. has made the best effort to accurately represent the pay range for this position, however, base pay offered may vary depending on job-related knowledge, skills, and experience, and any applicable cost of living data relevant to the position/candidate. Other compensation: opportunities for annual increase and bonus, and other types of bonuses Sheladia provides employees the opportunity to work in a diverse, multi-cultural environment with exposure to and collaboration with multiple disciplines on a variety of projects. You will work in a hands-on, collaborative team environment. Benefits (for qualified full-time employees) 401(k) 401(k) matching Dental insurance Employee assistance program Life insurance Long-term disability Medical insurance Paid holidays Paid time off Vision insurance Sheladia Associates, Inc. is an Equal Opportunity Employer. Compensation commensurate with experience.

SHELADIA Associates is a multi-disciplinary international professional consulting firm with demonstrated experience in the successful management and implementation of development projects worldwide. SHELADIA believes practicality and sustainability in development projects require flexible resource management, active participation of all stakeholders, and a shared goal of strengthening institutions and operational systems to optimize available resources. Equal Opportunity and Affirmative Action Employer. This position is contingent upon contract award Location: Rockville, MD / DMV area (specific location based on site/client office) We are seeking a skilled Structural Field Engineer (SFE) to provide vital technical support to structural maintenance teams. The successful candidate will establish and implement key processes to support maintenance operations and ensure adherence to engineering specifications and best practices. The SFE will play a critical role in guiding maintenance crews on proper methods, procedures, and materials selection while assisting in developing effective maintenance strategies. This position requires close coordination with program leadership and structural engineering teams to facilitate smooth execution of maintenance activities and to address any necessary adjustments in repair procedure. Job Description Provide technical support to structural maintenance crews, ensuring compliance with specifications, work instructions, and approved procedures Assist in developing maintenance strategies, including frequency, materials, and equipment selection Maintain logs of technical support activities and stay informed of maintenance plans, schedules, and safety regulations Support structural repairs such as track support, leak mitigation, drainage maintenance, and concrete patching Coordinate with structural engineers on new or revised repair procedures Monitor field maintenance activities and provide scheduling recommendations Analyze asset management data to guide maintenance frequency and type Recommend improvements to asset management and maintenance strategies Qualifications Bachelor's degree in Civil Engineering Minimum 5 years of experience in construction and preferably maintenance of major transit projects or similar infrastructure Proven experience with concrete and steel structures Ability to read and interpret plans, specifications, and repair procedures, and guide maintenance crews Ability to assist maintenance crews in selecting and deploying materials and equipment, including construction methods and techniques Strong ability to identify and address safety and quality concerns Effective coordination and communication skills with maintenance staff and stakeholders, with good interpersonal skills Experience in tunnel maintenance, including leak mitigation preferred Experience maintaining track-beds under direct fixation track, including track-bed and drainage cleaning and grout pad renewals preferred Experience with WMATA structural repairs preferred Familiarity with asset management databases such as Maximo and Optram, including incident analysis for maintenance planning preferred Additional Information Additional Information Proposed Salary: $90 - 125k annual Sheladia Associates, Inc. has made the best effort to accurately represent the pay range for this position, however, base pay offered may vary depending on job-related knowledge, skills, and experience, and any applicable cost of living data relevant to the position/candidate. Other compensation: opportunities for annual increase and bonus, and other types of bonuses Sheladia provides employees the opportunity to work in a diverse, multi-cultural environment with exposure to and collaboration with multiple disciplines on a variety of projects. You will work in a hands-on, collaborative team environment. Benefits (for qualified full-time employees) 401(k) 401(k) matching Dental insurance Employee assistance program Life insurance Long-term disability Medical insurance Paid holidays Paid time off Vision insurance Sheladia Associates, Inc. is an Equal Opportunity Employer. Compensation commensurate with experience.

Are you ready to begin your journey towards a rewarding career in the environmental field? Does protecting the environment and gaining hands-on experience as an Environmental Field-Testing Technician interest you? Apply today! You'll get great hands-on experience, travel to exciting customer locations within your region (with expenses covered), and enjoy the great outdoors! This is a great opportunity in a recession-proof industry where the sky is the limit! As an Environmental Field-Testing Technician, you will have the opportunity to learn and advance within our rapidly growing company while simultaneously obtaining an education on the industrial processes that we serve. Benefits to the Environmental Field-Testing Technician role include a clear and progressive career path, upward mobility, PTO, and great benefits that kick in the month following your start date. Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically-minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Starting pay rate is $20-$24 per hour, with generous quarterly profit-sharing bonuses and plenty of overtime available. In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $20-$24 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES

Job Description Are you ready to begin your journey towards a rewarding career in the environmental field? Does protecting the environment and gaining hands-on experience as an Environmental Field-Testing Technician interest you? Apply today! You'll get great hands-on experience, travel to exciting customer locations within your region (with expenses covered), and enjoy the great outdoors! This is a great opportunity in a recession-proof industry where the sky is the limit! As an Environmental Field-Testing Technician, you will have the opportunity to learn and advance within our rapidly growing company while simultaneously obtaining an education on the industrial processes that we serve. Benefits to the Environmental Field-Testing Technician role include a clear and progressive career path, upward mobility, PTO, and great benefits that kick in the month following your start date. Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically-minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Starting pay rate is $20-$24 per hour, with generous quarterly profit-sharing bonuses and plenty of overtime available. In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired after July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $20-$24 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES

We are seeking highly-motivated and experienced Sense and Warn Field Service Representative (FSR) for our Sense and Warn program to work OCONUS. Responsibilities include, but are not limited to: * The Sense and Warn (S&W) Radar Field Service Representative (FSR) will inspect, maintain, service and repair all ground/air-based radar systems. * The FSR is responsible for conducting emergency maintenance and repairs as required. * Documents all inspections, repairs and services. * Monitors consumption of materials ensuring adequate inventory is maintained to support all radar operations. Four (4) years of relevant experience or combined education maintaining and repairing air based and ground-based radar systems, or similar systems. Knowledge and experience executing maintenance, service, troubleshooting and repair of radar systems. Position requires self-motivation and the ability to work effectively under minimal supervision. Must demonstrate the ability to interact with all levels of an organization in a professional, diplomatic, and tactful manner. Must demonstrate a good attitude and ability to work as a member of a cohesive team. Must be able to multitask efficiently, work in a fast-paced environment on multiple projects, and have strong attention to detail. Must possess excellent writing and verbal skills. Must be proficient with Microsoft Windows operating systems and office automation software (e.g. Microsoft Office, SharePoint). Secret Security Clearance Required. We offer an excellent benefits package including PTO and paid Holidays. Eligible for health care for full-time work the first of the month after your start date. 401(k) plan with employer match available. NASC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Generous quarterly profit-sharing bonuses and plenty of overtime available, In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Ability to pass a comprehensive background check and drug screening Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $20-$22 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES

Job Description Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Generous quarterly profit-sharing bonuses and plenty of overtime available, In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Ability to pass a comprehensive background check and drug screening Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired after July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $20-$22 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES

Come work with us in the DMV Area! Are you ready to lead with precision and tackle complex challenges? As a Field Engineer, you will be the driving force behind projects, providing technical engineering information to ensure construction work complies with all engineering standards, codes and contract specifications. Bring your diverse ideas to build stronger, more resilient communities. Apply now and transform your career with us. What you will be doing Meets daily with project crews to review production schedule and confirm all materials, equipment and resources are readily available for production to continue on schedule and within budget. Collects, coordinates and analyzes shop drawings, design specifications, material requirements and project data through the duration of the project to ensure quality and compliance. Provides technical input for project work plan and scheduling. Identifying risk elements of production, materials, equipment or processes that could negatively impact the budget or schedule. Evaluates daily production, schedule and budget projections to accurately track project performance. Documents daily activities in Company approved methods and technologies. Remits accurate project quantity input and controls using assigned project cost coding to ensure project financials are accurately reported. Manages cost coding with Company finance and accounting teams regarding employee time, materials, equipment and subcontractor needs. Reviews and approves daily timecards for all Company construction crews. Works with Office Manager, payroll and job construction supervisors to resolve timecard inquiries, as needed. Reviews project specifications for quality assurance at the beginning of work, during the project work and after work completes. Initiates and manages appropriate certificates, inspections and other documentation regarding construction production on the project site. Works with construction crews and engineering leaders to plan field layout on the project site, ensuring appropriate utility and commercial lines are marked before production begins. Initiates and manages any permits needed before work can begin. Assists the development of design drawings and provides technical input, as needed. Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for Bachelor's Degree in a related field required. 1+ year experience preferred. Construction engineering experience or knowledge required. Beginner knowledge of construction equipment & techniques, drawing & specifications, building materials and required standards applicable to the project. Ability to assume responsibility, interface and communicate effectively with others. Why work for us Some of the benefits you may be eligible for as an employee are: Comprehensive compensation package and paid time off program Industry leading 401(k)/RRSP Medical/Extended Health Care, Dental, Vision and/or Provincial Medical Wellness benefits & Employee Assistance Program Tuition Reimbursement Program We are an EEO/ADA/Veterans employer. Salary Min USD $80,000.00/Yr. Salary Max USD $82,000.00/Yr. Vehicle Program Personal Vehicle Allowance Tier I: $750 USD/month

Are you ready to lead with precision and tackle complex challenges? As a Field Engineer, you will be the driving force behind projects, providing technical engineering information to ensure construction work complies with all engineering standards, codes and contract specifications. The Purple Line Light Rail Project, led by FlatironDragados, is a transformative infrastructure initiative in Maryland. Spanning 16 miles, the new light rail line will connect key communities in the Washington, D.C. suburbs, enhancing regional mobility and reducing traffic congestion. The project includes the construction of 21 stations, multiple bridges, tunnels, and state-of-the-art transit facilities-demonstrating Dragados' expertise in delivering complex, large-scale transportation infrastructure. Bring your diverse ideas to build stronger, more resilient communities. Apply now and transform your career with us. What you will be doing Meets daily with project crews to review production schedule and confirm all materials, equipment and resources are readily available for production to continue on schedule and within budget. Collects, coordinates and analyzes shop drawings, design specifications, material requirements and project data through the duration of the project to ensure quality and compliance. Provides technical input for project work plan and scheduling. Identifying risk elements of production, materials, equipment or processes that could negatively impact the budget or schedule. Evaluates daily production, schedule and budget projections to accurately track project performance. Documents daily activities in Company approved methods and technologies. Remits accurate project quantity input and controls using assigned project cost coding to ensure project financials are accurately reported. Manages cost coding with Company finance and accounting teams regarding employee time, materials, equipment and subcontractor needs. Reviews and approves daily timecards for all Company construction crews. Works with Office Manager, payroll and job construction supervisors to resolve timecard inquiries, as needed. Reviews project specifications for quality assurance at the beginning of work, during the project work and after work completes. Initiates and manages appropriate certificates, inspections and other documentation regarding construction production on the project site. Works with construction crews and engineering leaders to plan field layout on the project site, ensuring appropriate utility and commercial lines are marked before production begins. Initiates and manages any permits needed before work can begin. Assists the development of design drawings and provides technical input, as needed. Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for Bachelor's Degree in a related field required. 1+ year experience preferred. A basic understanding of the working concepts of Heavy Civil/Tunnel/Bridge/Highway projects from start to finish - bidding process through project close out. Beginner knowledge of construction equipment & techniques, drawing & specifications, building materials and required standards applicable to the project. Ability to assume responsibility, interface and communicate effectively with others. Why work for us Some of the benefits you may be eligible for as an employee are: Comprehensive compensation package and paid time off program Industry leading 401(k)/RRSP Medical/Extended Health Care, Dental, Vision and/or Provincial Medical Wellness benefits & Employee Assistance Program Tuition Reimbursement Program We are an EEO/ADA/Veterans employer. Salary Min USD $80,000.00/Yr. Salary Max USD $85,000.00/Yr.

Join Our Team as a Technician - Your Career Starts Here! Are you ready to put your skills to work and make an impact? C&K Industrial Services is looking for dedicated individuals to join our team as Technicians. In this hands-on role, you'll have the opportunity to work on a variety of projects, assist with essential field operations, and help us deliver top-quality services to our clients. Whether you have experience in manual labor or are eager to learn new skills, we're excited to support you in advancing your career with ongoing training and development. About the Role: As a Technician, you'll be dispatched to job sites across various locations predominantly in the local area, providing essential support to our team and ensuring the successful completion of a variety of tasks. You'll work closely with our Project Manager and Working Lead to uphold safety standards and help us meet our clients' needs. Your responsibilities will include performing vacuum operations, hydroblasting, and other critical tasks on-site, all while adhering to safety protocols and operational best practices. This role may require travel to assist at other office locations, with short-term out-of-town assignments ranging from one day to up to two weeks. Key Responsibilities: Safety First: Participate in tailgate safety meetings, complete necessary safety documentation, and sign off on confined space permits. General Labor: Use hand tools, assist with confined space work, and perform tasks at heights with cranes and scaffolding. Operational Support: Set up and maintain equipment, including vacuum hoses and ultra-high pressure waterlines. Customer Interaction: Build positive relationships with customers while representing the company professionally. High-Pressure Operations: Perform pressure washing up to 5,000 PSI and hydroblasting up to 40,000 PSI once trained. What We're Looking For: No Experience Needed but MUST HAVE a valid drivers license: Training will be provided for the right candidate, but experience in construction, manual labor (landscaping, etc.), or other physically demanding roles is a plus. Team Player: Ability to work effectively in teams, especially when lifting and moving heavy equipment. Safety Focused: A strong understanding of safety procedures and a commitment to following all guidelines. Adaptability: Willingness to work in various weather conditions, including on job sites that may involve heights and confined spaces. Physical Ability: Must be able to lift up to 50 pounds and handle physical tasks such as climbing stairs, ladders, and scaffolding. What We Offer: Competitive Salary: Includes salary increases after 90 days based on performance. Benefits: Paid time off (PTO) after 90 days, 401(k) with employer match, comprehensive health coverage (medical, dental, and vision), life insurance, AD&D, short-term disability, and an employee assistance program. Training and Career Growth: Access to continual safety and equipment training. Most of our management team started as Technicians and worked their way up through hands-on experience, learning customer needs, equipment, and services. Safety Gear Provided: Hard hat, respirator, gloves, harness, and hearing protection are provided. Steel-toed boots are required, but we also offer a safety boot reimbursement program. Per Diem for Travel: If you're assigned to out-of-town projects, we offer per diem support. Schedule: We operate 24/7/365 with varying schedules. Technicians are issued daily schedules, and work may include evening, weekend, or holiday shifts depending on job site needs. Note: This job description provides an overview of the primary responsibilities, but it may evolve over time based on business needs. We are a drug-free workplace and do not permit the use of marijuana in any form (medical or recreational) under our Federal DOT regulations.

If you are looking for a dynamic, fast-growth company with big ideas, you have come to the right place! GEO-TECHNOLOGY ASSOCIATES, INC. (GTA) is currently seeking entry level to experienced Geotechnical Field Technicians for our office in Laurel, Maryland. Responsibilities include construction observation and testing of soil, concrete, and other materials. This is an outstanding opportunity for recent graduates passionate about civil engineering, construction observation, materials testing, and geology, aiming to kickstart their career with a reputable, steadily growing organization! Candidates must possess their own vehicle, maintain a favorable driving record, enjoy collaborating with others, and thrive in outdoor work environments. GTA will furnish Personal Protective Equipment, which includes a High Visibility Vest, Hard Hat, Gloves, and Safety Glasses. Ample opportunities for training, certifications and career advancement. Geotechnical Field Technician Requirements: High School Diploma or College Degree B.S. in Civil Engineering, Geology, or similar degree preferred but not required Certificates such as NICET, ACI, WACEL or Structural certifications a plus Own a Reliable Vehicle and have a Good Driving Record Enjoy working outdoors Ability to work alone as well as in a group GTA offers a comprehensive benefits package which includes: Competitive Salary, Paid Time Off, Paid Holidays Yearly bonus potential Medical, Dental, Vision, Health Savings Account, Flexible Spending Life Insurance, Short- and Long-Term Disability Insurance 401(k) with Company Match Educational Assistance Program Free membership to professional societies Professional Growth & Advancement - we'll help you get there! - Seminars, Conventions, Lunch & Learns, Mentoring, Software Training Employee Referral Bonuses Employee Recognition Program Company picnics and events and a great working environment! This position may require standing for extended durations as well as repetitive motions such as lifting or hammering. The employee must have the ability to use their hands to handle, finger or feel; reach, climb or balance; crouch, stoop, crawl, kneel and sit, see and smell; including close, distance and peripheral vision, depth vision and ability to focus. The employee will regularly lift and/or move 60 pounds; and occasionally move 80 pounds or more (such as a loaded wheelbarrow of concrete or soil samples). Salary range for entry level to senior technicians with certifications is between $18 - $26 per hour. We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof. #LI-Onsite

GTA is currently seeking candidates for Geotechnical Field (Materials Testing) Technician position in our Wilkes Barre, Pennsylvania office. Responsibilities include construction observation and testing of soil, concrete, and other materials. GTA provides ample opportunities for training, certifications and career advancement. You must own a reliable vehicle, have a good driving record, like working with people and enjoy working outdoors. Office Address: 3383 Bear Creek Blvd Wilkes-Barre, PA 18702 Geotechnical Field (Materials Testing) Technician Requirements: Own Transportation, valid drivers license and Good Driving Record Enjoy Working Outdoors High School Diploma or Equivalent ACI, NICET, WACEL and/or other certifications desired Why You'll Love Working With Us: We believe in taking care of our team-professionally, personally, and everything in between. Here's what you can look forward to as part of our team: Competitive Salary with generous Paid Time Off and Paid Holidays to support your work-life balance Annual Bonus Potential - your hard work deserves to be rewarded Comprehensive Health Coverage - including Medical, Dental, Vision, plus Health Savings and Flexible Spending Accounts Peace of Mind - with Company-paid Life Insurance and both Short- and Long-Term Disability Insurance Invest in Your Future - through our 401(k) with Company Match Education Assistance Program - helping you continue to grow and learn Employee Assistance Program - free access to short-term counseling, financial coaching, legal consultations, life coaching, and more Peak Health Wellness Plan - personalized nurse consultations, no-cost lab work, and ongoing wellness support Stay Connected & Inspired - with free memberships to professional societies Professional Development - Seminars, Conventions, Lunch & Learns, Mentoring, and Software Training to help you reach your goals Referral Bonuses - bring great people on board and get rewarded Recognition That Matters - we celebrate achievements big and small with our Employee Recognition Program Team Spirit & Fun - enjoy company picnics, events, and a welcoming, supportive work environment PLEASE NOTE: This position may require standing for extended durations as well as repetitive motions such as lifting or hammering. The employee must have the ability to use their hands to handle, finger or feel; reach, climb or balance; crouch, stoop, crawl, kneel and sit, see and smell; including close, distance and peripheral vision, depth vision and ability to focus. The employee will regularly lift and/or move 60 pounds, and occasionally move 80 pounds or more (such as a loaded wheelbarrow of concrete or soil samples). We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof. #LI-Onsite

GTA is currently seeking Geotechnical Field (Materials Testing) Technicians for our office in Abingdon, MD. Responsibilities include construction observation and testing of soil, concrete, and other materials. This is an EXCELLENT opportunity for recent civil engineering or environmental science graduates. We provide ample opportunities for training, certifications and career advancement. You must own a reliable vehicle, have a good driving record, like working with people and enjoy working outdoors. Certifications preferred! PLEASE NOTE: This position may require standing for extended durations as well as repetitive motions such as lifting or hammering. The employee must have the ability to use their hands to handle, finger or feel; reach, climb or balance; crouch, stoop, crawl, kneel and sit, see and smell; including close, distance and peripheral vision, depth vision and ability to focus. The employee will regularly lift and/or move 60 pounds, and occasionally move 80 pounds or more (such as a loaded wheelbarrow of concrete or soil samples). Office Address: 3445-A Box Hill Corp. Center Drive, Abingdon, MD 21009 Geotechnical Field (Materials Testing) Technician Requirements: Own Transportation, valid drivers license and Good Driving Record Enjoy Working Outdoors High School Diploma or Equivalent ACI, NICET, WACEL and/or other certifications desired Why You'll Love Working With Us: We believe in taking care of our team-professionally, personally, and everything in between. Here's what you can look forward to as part of our team: Competitive Salary with generous Paid Time Off and Paid Holidays to support your work-life balance Annual Bonus Potential - your hard work deserves to be rewarded Comprehensive Health Coverage - including Medical, Dental, Vision, plus Health Savings and Flexible Spending Accounts Peace of Mind - with Company-paid Life Insurance and both Short- and Long-Term Disability Insurance Invest in Your Future - through our 401(k) with Company Match Education Assistance Program - helping you continue to grow and learn Employee Assistance Program - free access to short-term counseling, financial coaching, legal consultations, life coaching, and more Peak Health Wellness Plan - personalized nurse consultations, no-cost lab work, and ongoing wellness support Stay Connected & Inspired - with free memberships to professional societies Professional Development - Seminars, Conventions, Lunch & Learns, Mentoring, and Software Training to help you reach your goals Referral Bonuses - bring great people on board and get rewarded Recognition That Matters - we celebrate achievements big and small with our Employee Recognition Program Team Spirit & Fun - enjoy company picnics, events, and a welcoming, supportive work environment Hourly Rate: $18-$20+ per hour, depending on relevant experience. Overtime paid at 1.5 times your hourly We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all subsequent revisions and amendments. #LI-Onsite

GTA is currently seeking Geotechnical Field Technicians for our York, Pennsylvania office. Candidates with an interest in building a career in the construction observation, environmental and/or geotechnical consulting fields are preferred. As a Technician, you will observe construction activities and perform a wide range of inspections and materials testing services for geotechnical, commercial, residential and other building-related projects. You will provide field support to geologists, engineers, and scientists for a diverse client base in the private, state and government sectors. Technicians require the ability and willingness to work almost entirely outdoors, perform extensive fieldwork and travel significant distances to project sites. Overtime may be required, depending on the project. GTA will reimburse you for mileage and tolls and pay you "time and a half" for overtime! GTA will provide you with Personal Protective Equipment, which includes High Visibility Vest, Hard Hat, Gloves, and Safety Glasses. We seek individuals with leadership potential, excellent communication and interpersonal skills, problem-solving abilities, a passion for excellence and a desire to build a rewarding career with a dynamic, growing, well-respected firm! If this sounds like you, and you seek a home for the best years of your career, look no further than GTA! Geotechnical Field Technician REQUIREMENTS: Associate's or Bachelor's degree or high school diploma/GED At least one year of relevant experience preferred Your own reliable transportation, valid driver's license; and satisfactory driving record Ability to regularly lift to 60 pounds Ability to work both independently and as part of a team, self-motivated, possess a strong work ethic Enjoy Working Outdoors Must be authorized to work in the U.S.; visa sponsorship is not available NICET and/or ACI certifications - These are a plus, but not required Must have steel toe boots Why You'll Love Working With Us: We believe in taking care of our team-professionally, personally, and everything in between. Here's what you can look forward to as part of our team: Competitive Salary with generous Paid Time Off and Paid Holidays to support your work-life balance Annual Bonus Potential - your hard work deserves to be rewarded Comprehensive Health Coverage - including Medical, Dental, Vision, plus Health Savings and Flexible Spending Accounts Peace of Mind - with Company-paid Life Insurance and both Short- and Long-Term Disability Insurance Invest in Your Future - through our 401(k) with Company Match Education Assistance Program - helping you continue to grow and learn Employee Assistance Program - free access to short-term counseling, financial coaching, legal consultations, life coaching, and more Peak Health Wellness Plan - personalized nurse consultations, no-cost lab work, and ongoing wellness support Stay Connected & Inspired - with free memberships to professional societies Professional Development - Seminars, Conventions, Lunch & Learns, Mentoring, and Software Training to help you reach your goals Referral Bonuses - bring great people on board and get rewarded Recognition That Matters - we celebrate achievements big and small with our Employee Recognition Program Team Spirit & Fun - enjoy company picnics, events, and a welcoming, supportive work environment This position may require standing for extended durations as well as repetitive motions such as lifting or hammering. The employee must have the ability to use their hands to handle, finger or feel; reach, climb or balance; crouch, stoop, crawl, kneel and sit, see and smell; including close, distance and peripheral vision, depth vision and ability to focus. The employee will regularly lift and/or move 60 pounds; and occasionally move 80 pounds or more (such as a loaded wheelbarrow of concrete or soil samples). We ensure nondiscrimination and equal employment opportunity in all programs and activities in accordance with Title VI of the Civil Rights Act of 1964, and all revisions and addendums thereof. #LI-Onsite #BreezyGTA