Fleet Mechanic jobs at Valicor

The Branch Fleet Technician will be responsible for maintaining diesel equipment and hydrovac operation by performing inspections, preventive maintenance, and necessary adjustments and alignments. Corrects vehicle deficiencies and keeps accurate records with guidance and direction. Manages work orders in Fleetio to ensure comprehensive documentation and tracking. This role is crucial for ensuring the reliability and efficiency of diesel equipment, ultimately supporting the overall operational success of the organization. #BDGRJobsHP Union wages ($38.00) and benefits to be discussed directly with the Branch Manager. What You'll Be Doing: • Performs inspection, diagnosis and repair of assigned vehicles and equipment and preventative maintenance such as oil changes and greasing of trucks. • Conducts safety checks on trucks. • Maintains a clear line of communication to the Branch Manager and Regional Fleet Staff and other staff in the maintenance department. • Keeps the Hydrovac Fleet operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance. • Updates job knowledge by participating in educational opportunities; reading technical and regulation publications. • Occasionally may perform service calls for emergency breakdowns. • Maintains a clean, safe work area in compliance with Corporate/OSHA Standards and performs all work in accordance with established procedures. What We're Looking For: • Education: High School Diploma. • Licensed Heavy Duty Technician. • Driver's License required; Class B CDL license is preferred. • Demands include frequent sitting, standing, walking, stooping, kneeling, bending, lifting, and reaching. Employees must also crawl under vehicles, climb ladders, work in tight spaces, stand or kneel on cement floors, and regularly lift or move heavy objects such as tires, rims, and brake drums. • Regularly required to lift or move objects weighing 25 to 50 lbs, with moderate grasping, lifting, pushing, and pulling of these objects. • Work may require more than 40 hours per week. What You'll Need For Success: • Some knowledge with electronic diagnostics. • Experience with Peterbilt and Western Star chassis a plus. • Experience with troubleshooting Hydrovac equipment a plus. • Knowledge of DOT compliance, laws, rules, regulations, and safety is helpful. • Computer literate: Fleetio (our fleet services technology,) Microsoft, Outlook, and Excel. • Will be required to provide your own standard tools; all specialty tools will be provided. If you feel you don't have the experience listed above, but still think you are qualified for the job, we encourage you to apply for consideration. What You'll Get In Return: • Generous weekly pay and overtime opportunities • Low-cost Medical, Dental, and Vision Insurance • Retirement Plan with Employer Matching Contributions • Attractive Vacation Programs • Inclusive Group Life Insurance • Supportive Employee Assistance Program (EAP) that allows for covered behavioral health visits • Rewarding Employee Referral Program • Valuable Employee Training Program(s) Badger Infrastructure Solutions is the industry leader in non -destructive hydro-excavation (hydrovac) services. Since 1992, Badger has been innovating cutting-edge technology and providing services to a diverse customer base, including oil and gas, energy, industrial, construction, transportation and other markets, as well as numerous government agencies within Canada and the United States. We hire great people from a wide array of backgrounds, not because it is the right thing to do, but because it makes Badger stronger. There has never been a better time to join and grow with Badger.

Specific Responsibilities Mechanic II performs a variety of duties that may require a degree of skill and ability in the repair, modification and maintenance of machinery and related mechanical equipment. He/she may assist senior level mechanics in dismantling and assembling equipment/machines; repairing and replacing parts. * Responsible for Daily Operation and Maintenance of compressors, glycol dehydration unit, B-Tex unit, incinerator, slop tanks, sumps, transfer pumps, "control air" air compressors and all equipment associated with compressor facility. * Perform Daily checks, but not limited too; * Glycol PH and adjust accordingly. * Glycol pumps flow rate and pressures. * Temperatures on compressor valves, pressure readings and flow rates. * Check for proper operation of all sumps and dump valves. * Check all fluid levels and operation of lubricators. * Check air compressors, filters, oil levels, belts, pressures and bleed lines. * Check for leaks, loose bolts, vibration or unusual noises by making visual inspection at least three times per day on all equipment. * Accurately record all above information and any performed maintenance. * Become certified on CO2 line, DIG TESS, location, Right of Way, signage, valve operation etc. * Attend all DIG TESS notifications, reply accordingly and record. * Perform oil changes on all equipment in a timely manor and record. * Make notifications when problems are suspected. * Order, stock and label spare equipment needed to keep facility in operation, in an orderly fashion. * Keep facility clean and neat * Operate in a Safe and environmentally sound manner. * Stay in contact with vendors for equipment, oils, chemicals and filters for updated revisions and recommendations. * Behavioral Characteristics * Team player willing to take active role in team responsibilities. * Excellent time management skills. * Ability to learn new skills. * Willingness to share knowledge with others. * Good written and oral communication skillS * Safety * Operate in a Safe and environmentally sound manner. Maintain Good driving record * Good knowledge of safe oil and gas operations and procedures in mature secondary and tertiary recovery fields. * Follow safe practices with regard to oil field electrical installations. * Supervision * Keep track of all contractors, venders and company people when inside of facility. Qualifications & Experience The successful candidate will have the following qualifications and experience: * High school diploma or equivalent * 3+ years of experience Competencies The successful candidate should demonstrate and exhibit the following core competencies: * Communication: Writes, speaks, and presents information effectively and persuasively across communication setting; * Results: Pursues work with energy, drive, and results orientation to positively impact Apache's business success; * Collaboration: Works in partnership with others and encourages different perspectives, while building and maintaining trust; and * Culture: Willingness and ability to align one's behavior with the needs, priorities, and goals of Apache. Company Overview Our primary product is energy, and where there is affordable, abundant energy, people are healthier, have access to better education, and are given greater opportunities to elevate their families to higher standards of living. Nearly 3 billion people - roughly one-third of the global population - live without electricity or without clean cooking facilities. We are committed to providing energy in innovative and more sustainable ways to help raise the standard of living for those living in energy poverty and to meet the ongoing demands of people and economies around the world. The products we deliver power increasingly cleaner electricity across the globe, fuel tractors and trucks, make fertilizer to keep the world's food supply on the table, and heat our schools, hospitals and businesses. Our employees bring a wide range of talents and skills to the job every day to tackle complex business challenges. We believe in providing a truly rewarding work environment supported by a benefits platform that ranks among the best in our peer group. Our company offers career development opportunities where employees can grow personally and professionally. We promote employee benefits that cultivate a family-friendly work environment and focus on our employees' overall well-being. We are committed to being a workplace where all employees are valued and can thrive with a sense of belonging. Our commitment to non-discriminatory, equal employment opportunities benefits our individual employees, our company and our external stakeholders; we are better as an organization when various experiences, ideas, and perspectives are brought to the table. Apache Corporation is a wholly owned subsidiary of APA Corporation (NASDAQ:APA). Apache has operations in the United States, Egypt's Western Desert and the United Kingdom's North Sea and a sister company with exploration opportunities offshore Suriname. Whether supporting Apache, APA Corporation or one of its subsidiaries, team members are employed by Apache Corporation. For additional information about APA Corporation, please visit: Portfolio Sustainability Investors *************** Apache Statement on Hiring To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to base all employment-related decisions and actions exclusively on employment-related criteria. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to provide broad dissemination of job opportunities, as consistent with the nature of the positions. To provide genuine equal opportunity to all people, it is the policy of Apache Corporation and its subsidiaries to review its employment-related policies and actions on a regular basis to ensure that their application is consistent with their intent. Equal Employment Opportunity

A&P Mechanic Estimated Pay: Up to $1300.00/Week (After Taxes) or $41.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Job Type: Temp-to-hire Benefits: Relocation assistance Experience: Wide-Body: 2 years (Required) License/Certification: Airframe & Powerplant License (Required) Work Location: In person

Brief Description: The Mechanic performs maintenance on all company equipment, provides guidance and oversight to less experienced mechanics, and ensures compliance with all company and regulatory standards. This role involves troubleshooting, diagnostics, mentoring, and maintaining proper maintenance records. Detailed Description: Performs and completes all essential functions required of Entry-Level to Mechanic Level 3 positions. Assists with equipment function checks at the facility. Troubleshoots and diagnoses equipment failures, including engine, electrical, HVAC, suspension, transmission, brake, communication, hydraulic, and cryogenics systems. Conducts complex equipment repairs and oversees maintenance as needed. Ensures compliance with DOT regulations through certification and inspection processes. Plans and executes maintenance programs effectively. Inspects and approves completed repairs. Creates and manages maintenance orders in SAP or SAP Fiori systems. Mentors and coaches entry-level and lower-level mechanics during repairs. Coordinates and facilitates HSE (Health, Safety, and Environment) meetings and training sessions, reporting unsafe acts, conditions, or hazards immediately. Actively participates in safety meetings to identify and address risks and hazards. Utilizes competency processes to enhance job performance. Leads and presents during meetings with regional teams, operations, and district managers. Performs additional tasks and duties as assigned. Job Requirements: Required Knowledge, Skills, and Abilities: Expertise in identifying, maintaining, and troubleshooting equipment, including engines, electrical systems, HVAC, suspension, transmission, brake, diagnostic, communication, hydraulic, and cryogenics systems. Knowledge of applicable DOT regulations. Ability to supervise and oversee maintenance operations on all equipment. Strong mentoring and coaching skills. Proficiency in facilitating HSE meetings and training sessions. Experience in creating maintenance orders using SAP Net Weaver or SAP Fiori systems. Familiarity with processes for reviewing, recording, and retaining proper maintenance records. Ability to coordinate corrective maintenance activities and plan resources effectively. Experience in inspecting and approving completed repairs prior to returning equipment to production. Strong communication skills, including the ability to read, write, and speak English effectively. Proficiency in performing basic mathematical calculations. Language Comprehension: Must understand and speak English at a level sufficient to issue, receive, and respond to both safety and operations-related directions. Minimum Qualifications: Education: High School Diploma, GED, or applicable experience. Experience: 1-10 years in a related role. Additional Details: The Mechanic position demands technical expertise, strong leadership skills, and a commitment to maintaining high safety and service quality standards. This role is critical to ensuring the reliability and operational efficiency of NexTier equipment.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the repair and maintenance of pipelines, equipment and performance of work associated with daily operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, troubleshoot, repair, and operate compressor station or pump station equipment, plant facilities and pipeline facilities including: prime movers and compressors, valves, filters, separators, dehydrators, pumps, and auxiliary equipment in order to meet production and product throughput requirements in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Plan, organize, prioritize, communicate, and coordinate work with employees and contractors to validate the work is completed in a safe, timely, and effective manner * Provide budgetary information, schedule work and outages, order materials, maintain inventory, and coordinate needed resources * Interpret and utilize drawings, schematics, loading/pump curves, OEM manuals, and other technical resources in the performance of assigned work * Effectively and safely use hand tools, power tools, and portable and mobile work equipment in hazardous, classified, and non-hazardous environments * Utilize precision measurement equipment to determine dimensions and set operating equipment clearances and tolerances * Maintain equipment records, logs, inventory, and other documentation required by the Partnership's procedures and regulatory agencies * Provide training and leadership to develop and maintain effective work crews, dependent upon level hired * Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.) * Maintain facilities, grounds, and work areas in a safe, orderly, and efficient manner * Actively participate and provide leadership in safety programs and initiatives while following policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record and ability to be certified as a USDOT driver under FMCSA may be required based on applicable law, reporting location, and geographic work area * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Occasional exposure to heat, cold, and other adverse weather conditions * Work may include confined spaces and may require heavy lifting in excess of 75 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment (which may include, but may not be limited to, necessary respirators) * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required

Job Description Estimated Pay: Up to $1300.00/Week (After Taxes) or $40.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools Powered by JazzHR ixyv0Q0RW3

Estimated Pay: Up to $1300.00/Week (After Taxes) or $40.00/hr Job Type: Full-time Schedule: Monday - Friday Aircraft: B737, B767, A320 or similar License: Airframe & Power Plant License - Required Experience Requirements Minimum 2+ years of experience in MRO environments (e.g., AAR Corp., Aviation Technical Services (ATS), Delta TechOps, Lufthansa Technik, StandardAero, ST Engineering) or with carriers such as Delta, Frontier, United, etc. Technical Skills Adhere to General Work Requirements Comply with Environmental / Health / Safety policies and procedures. Perform all work in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist in providing time estimates Assist in performing complex repairs on aircraft systems Perform other duties as assigned Physical Requirements Able to lift up to 50 lbs Comfortable in physically demanding environments Tools Must supply personal tools

Our skilled trades professionals use their hands-on technical and mechanical abilities to work on a variety of unique equipment to our industry. We are looking for motivated individuals who have the strong ability to troubleshoot, problem solve and the desire to make tomorrow better than today. PADNOS recognizes the demand for skilled trades so we are teaming with educators to develop partnerships and create hands-on programs for students and individuals. PADNOS is a full-service recycling company handling paper, plastic, metals and electronic recycling. We tailor recycling programs for consumer and industrial clients throughout the United States. PADNOS was founded over a century ago and continues to transform the recycling industry. The company has thrived as a family business through four generations and has grown to be a market leader and best in class innovator. PADNOS has a rich history of taking care of our Team Members, their families and the multiple communities we serve. We invest in our Team Members and offer the following benefits: Competitive Wage Medical, Dental and Vision Insurance 100% Tuition reimbursement for Team Members 75% Tuition Reimbursement for dependents First Time Home Buying Assistance 401K Match and Profit Sharing Performance Driven Bonuses Tractor/Trailer Mechanic Position Summary: The Mechanic will perform inspections and preventative maintenance on a variety of equipment such as semi-tractors, trailers, heavy equipment and machinery including brakes, suspensions, electrical, lighting and mechanical. Repair hydraulics, electrical and other mechanical components Troubleshoot and mechanical diagnosis to identify repair needs Prepare and complete required paperwork Tractor/Trailer Mechanic Position Qualifications: One plus year of related diesel mechanic or related military training Knowledge of welding and torching helpful, but not necessary Mathematical and mechanical aptitude Related experience and knowledge of the methods, materials tools and techniques used in repairing semi tractors & trailers Strong communication skills, effective communicator Proven ability to work alone or in a team setting Attention to accuracy and detail Demonstrated safety consciousness Relevant Military experience #IND123 Be a part of the green movement and join PADNOS today! PADNOS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, weight, height, sex, sexual orientation, marital status, national origin, age, genetic medical information, protected veteran status, or disability status.

Are you interested in joining our team? Chat with our digital assistant to learn more about our company and apply right from your mobile device! Text ETP to 25000 to get started or apply through this web posting if you prefer. Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the repair and maintenance of pipelines, equipment and performance of work associated with daily operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, troubleshoot, repair, and operate compressor station or pump station equipment, plant facilities and pipeline facilities including: prime movers and compressors, valves, filters, separators, dehydrators, pumps, and auxiliary equipment in order to meet production and product throughput requirements in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Plan, organize, prioritize, communicate, and coordinate work with employees and contractors to validate the work is completed in a safe, timely, and effective manner * Provide budgetary information, schedule work and outages, order materials, maintain inventory, and coordinate needed resources * Interpret and utilize drawings, schematics, loading/pump curves, OEM manuals, and other technical resources in the performance of assigned work * Effectively and safely use hand tools, power tools, and portable and mobile work equipment in hazardous, classified, and non-hazardous environments * Utilize precision measurement equipment to determine dimensions and set operating equipment clearances and tolerances * Maintain equipment records, logs, inventory, and other documentation required by the Partnership's procedures and regulatory agencies * Provide training and leadership to develop and maintain effective work crews, dependent upon level hired * Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.) * Maintain facilities, grounds, and work areas in a safe, orderly, and efficient manner * Actively participate and provide leadership in safety programs and initiatives while following policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record and ability to be certified as a USDOT driver under FMCSA may be required based on applicable law, reporting location, and geographic work area * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Occasional exposure to heat, cold, and other adverse weather conditions * Work may include confined spaces and may require heavy lifting in excess of 75 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment (which may include, but may not be limited to, necessary respirators) * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required

Lewis Energy is a privately-owned, exploration and production company. Unlike most E&P companies, we are vertically integrated. As a vertically integrated company, we have incorporated the latest technology which allows us to keep our costs down. Our innovation allows us to continue drilling during hard times when other companies are abandoning their operations. Lewis Energy Group is looking for a highly motivated Heavy Truck Mechanic to join our Service Center team. The Heavy Truck Mechanic will perform preventative maintenance and routine mechanical, electrical, hydraulic, and pneumatic repairs on company assets to include all DOT equipment. Responsibilities * Heavy Duty Maintenance: Performs preventative maintenance on all DOT equipment according to established guidelines and time frames. Keeps accurate and detailed records of failures and repairs in Computerized Maintenance Management System. Acts as an assistant to more senior Mechanics on larger jobs. * Troubleshooting: Troubleshoots and diagnoses routine problems or recurring malfunctions of company assets and chooses course of action. Consults with supervisor to ensure accuracy of diagnosis and approval for work. Completes troubleshooting repairs and/or modifications work on equipment. * Tool Maintenance: Performs daily inspections of tools and equipment used. Ensures cleanliness of hand tools, equipment and parts. Qualifications * High school diploma or general education degree (GED); minimum five years related experience or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. * Bilingual in English and Spanish. Computer Skills To perform this job successfully, an individual should have basic knowledge of computer use and Microsoft Office Suite. Knowledge of CMMS software is a plus. Certificates, Licenses, Registrations Valid Driver License. DOT License is a plus. Other Skills and Abilities Strong communication and time management skills. Ability to work under pressure. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to stand and climb or balance. The employee is occasionally required to sit and and/or smell. The employee must occasionally lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; high, precarious places and outside weather conditions. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate. Top benefits As a team member at Lewis Energy Group, you'll enjoy: * Paid time off * Comprehensive benefits package, including health, vision and dental insurance * Career advancement and bonus opportunities Location Lewis Energy Group is located in Encinal, Texas and is situated along Interstate 35, approximately 40 miles north of Laredo.

WE ARE HIRING! Mechanic II- Frac At Lewis Energy Group, we are a vertically integrated exploration and production (E&P) company and a leading natural gas producer in South Texas and across the nation. With operations in South Texas, Colombia, and Mexico, we take pride in our long-standing commitment to excellence, innovation, and community engagement. What sets us apart is our family-oriented work culture, built over decades of dedication and teamwork. This culture drives the passion we bring to our work and the positive impact we strive to make in the communities where we operate. As an Mechanic II- Frac, you will diagnose and perform complex mechanical, electrical, hydraulic, and pneumatic repairs on company assets, including DOT and Completions Services equipment. Responsibilities What You'll Do: ️ Perform preventative maintenance and repairs on DOT and Completions Services equipment according to company standards and timelines️ Accurately document maintenance activities, failures, and repairs in the Computerized Maintenance Management System (CMMS)️ Identify, order, and replace parts and equipment as needed️ Troubleshoot and diagnose complex equipment issues️ Conduct routine tool and equipment inspections, ensuring cleanliness and functionality️ Support and assist lower-level Mechanics in completing repairs and maintenance tasks Qualifications About You (Qualifications & Experience) We are looking for dedicated individuals who bring expertise, problem-solving abilities, and a strong work ethic to our team. Ideal candidates will have: Education: High school diploma or GED required; technical/vocational certificate preferred Experience: Minimum of 3 years of related mechanical experience in equipment maintenance and repair Licenses: Valid Driver License required; DOT License preferred Technical Skills: Knowledge of Microsoft Office Suite and basic computer use Familiarity with RTA Fleet Management Software preferred Language Skills: Bilingual in English and Spanish preferred Additional Skills: Strong communication and time management skills Ability to work under pressure and solve complex problems Your Work Schedule & Hours Work shifts up to 12 hours Overtime as needed 10/5 Rotation Schedule (Ten days on, 5 days off) Hours may vary based on operational needs Your Benefits At Lewis Energy Group, we value the dedication and hard work of our employees. That's why we offer a comprehensive benefits package designed to support you and your family while keeping costs affordable. Insurance - Medical, Dental, Vision, Basic Life, AD&D, and additional benefit options tailored to your needs Retirement - 401K with a 4% company match Annual Bonus - Awarded at the discretion of the Compensation Committee Generous PTO & Paid Holidays Employee Assistance Program (EAP) - Free, confidential support for you and your dependents Career Progression Program - Opportunities for growth and development ️On-Site Fitness Center Wellness & Company Events throughout the year Lodging (dependent on role) Per Diem for drilling roles Join Lewis Energy Group and become part of a company that values hard work, innovation, and the well-being of its team members. Apply online at ******************* .

Lewis Energy is a privately-owned, exploration and production company. Unlike most E&P companies, we are vertically integrated. As a vertically integrated company, we have incorporated the latest technology which allows us to keep our costs down. Our innovation allows us to continue drilling during hard times when other companies are abandoning their operations. Lewis Energy Group is looking for a highly motivated Heavy Equipment Mechanic to join our Service Center team. The Heavy Equipment Mechanic will diagnose problems and performs complex and/or major mechanical, electrical, hydraulic, and pneumatic repairs on all yellow iron and other oil field equipment. Responsibilities * Heavy Equipment Maintenance: Performs all necessary preventative maintenance on heavy equipment according to established guidelines and time frames. Keeps accurate and detailed records of failures and repairs in Computerized Maintenance Management System. Identifies and orders parts necessary to complete repairs and routine maintenance. Performs complex repairs on equipment. Replaces parts and equipment as necessary. Assists lower level Mechanics in completing work assignments as necessary. * Troubleshooting: Troubleshoots and diagnoses all problems with yellow iron equipment. Completes troubleshooting repairs and/or modifications work on equipment. * Tool Maintenance: Performs daily inspections of tools and equipment used. Ensures cleanliness of hand tools, equipment and parts. Qualifications * High school diploma or general education degree (GED); minimum five years related experience or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. * Bilingual in English and Spanish. Computer Skills To perform this job successfully, an individual should have basic knowledge of computer use and Microsoft Office Suite. Knowledge of CMMS software is a plus. Fleet Management Software is a plus. Certificates, Licenses, Registrations Valid Driver License. DOT License is a plus. Other Skills and Abilities Strong communication and time management skills. Ability to work under pressure. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to stand and climb or balance. The employee is occasionally required to sit and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; high, precarious places and outside weather conditions. The employee is frequently exposed to extreme heat and vibration. The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock. The noise level in the work environment is usually moderate. Top benefits As a team member at Lewis Energy Group, you'll enjoy: * Paid time off * Comprehensive benefits package, including health, vision and dental insurance * Career advancement and bonus opportunities Location Lewis Energy Group is located in Encinal, Texas and is situated along Interstate 35, approximately 40 miles north of Laredo.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the repair and maintenance of pipelines, equipment and performance of work associated with daily operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, troubleshoot, repair, and operate compressor station or pump station equipment, plant facilities and pipeline facilities including: prime movers and compressors, valves, filters, separators, dehydrators, pumps, and auxiliary equipment in order to meet production and product throughput requirements in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Plan, organize, prioritize, communicate, and coordinate work with employees and contractors to validate the work is completed in a safe, timely, and effective manner * Provide budgetary information, schedule work and outages, order materials, maintain inventory, and coordinate needed resources * Interpret and utilize drawings, schematics, loading/pump curves, OEM manuals, and other technical resources in the performance of assigned work * Effectively and safely use hand tools, power tools, and portable and mobile work equipment in hazardous, classified, and non-hazardous environments * Utilize precision measurement equipment to determine dimensions and set operating equipment clearances and tolerances * Maintain equipment records, logs, inventory, and other documentation required by the Partnership's procedures and regulatory agencies * Provide training and leadership to develop and maintain effective work crews, dependent upon level hired * Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.) * Maintain facilities, grounds, and work areas in a safe, orderly, and efficient manner * Actively participate and provide leadership in safety programs and initiatives while following policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record and ability to be certified as a USDOT driver under FMCSA may be required based on applicable law, reporting location, and geographic work area * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Occasional exposure to heat, cold, and other adverse weather conditions * Work may include confined spaces and may require heavy lifting in excess of 75 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment (which may include, but may not be limited to, necessary respirators) * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the repair and maintenance of pipelines, equipment and performance of work associated with daily operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, troubleshoot, repair, and operate compressor station or pump station equipment, plant facilities and pipeline facilities including: prime movers and compressors, valves, filters, separators, dehydrators, pumps, and auxiliary equipment in order to meet production and product throughput requirements in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Plan, organize, prioritize, communicate, and coordinate work with employees and contractors to validate the work is completed in a safe, timely, and effective manner * Provide budgetary information, schedule work and outages, order materials, maintain inventory, and coordinate needed resources * Interpret and utilize drawings, schematics, loading/pump curves, OEM manuals, and other technical resources in the performance of assigned work * Effectively and safely use hand tools, power tools, and portable and mobile work equipment in hazardous, classified, and non-hazardous environments * Utilize precision measurement equipment to determine dimensions and set operating equipment clearances and tolerances * Maintain equipment records, logs, inventory, and other documentation required by the Partnership's procedures and regulatory agencies * Provide training and leadership to develop and maintain effective work crews, dependent upon level hired * Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.) * Maintain facilities, grounds, and work areas in a safe, orderly, and efficient manner * Actively participate and provide leadership in safety programs and initiatives while following policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record and ability to be certified as a USDOT driver under FMCSA may be required based on applicable law, reporting location, and geographic work area * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Occasional exposure to heat, cold, and other adverse weather conditions * Work may include confined spaces and may require heavy lifting in excess of 75 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment (which may include, but may not be limited to, necessary respirators) * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the repair and maintenance of pipelines, equipment and performance of work associated with daily operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, troubleshoot, repair, and operate compressor station or pump station equipment, plant facilities and pipeline facilities including: prime movers and compressors, valves, filters, separators, dehydrators, pumps, and auxiliary equipment in order to meet production and product throughput requirements in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Plan, organize, prioritize, communicate, and coordinate work with employees and contractors to validate the work is completed in a safe, timely, and effective manner * Provide budgetary information, schedule work and outages, order materials, maintain inventory, and coordinate needed resources * Interpret and utilize drawings, schematics, loading/pump curves, OEM manuals, and other technical resources in the performance of assigned work * Effectively and safely use hand tools, power tools, and portable and mobile work equipment in hazardous, classified, and non-hazardous environments * Utilize precision measurement equipment to determine dimensions and set operating equipment clearances and tolerances * Maintain equipment records, logs, inventory, and other documentation required by the Partnership's procedures and regulatory agencies * Provide training and leadership to develop and maintain effective work crews, dependent upon level hired * Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.) * Maintain facilities, grounds, and work areas in a safe, orderly, and efficient manner * Actively participate and provide leadership in safety programs and initiatives while following policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record and ability to be certified as a USDOT driver under FMCSA may be required based on applicable law, reporting location, and geographic work area * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Occasional exposure to heat, cold, and other adverse weather conditions * Work may include confined spaces and may require heavy lifting in excess of 75 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment (which may include, but may not be limited to, necessary respirators) * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required * Must live within 40 miles of reporting location

Job Title: Class B-2 Mechanic Department: Fleet Maintenance Reports To: Urban Fleet Manager FLSA Status: Non-Exempt Salary: $20.85 per hour Responsible for performing various maintenance related duties of the Urban Division of HCTD, under the direction of the HCTD Fleet Manager or designee, including but not limited to the tasks detailed below. Must perform all duties in a safe manner. Only Two positions currently available: 5am - 2pm or 11pm - 8pm ESSENTIAL JOB FUNCTIONS * Perform basic service for fleet related to running repairs, such as light bulbs, flashers, minor repairs, and, perform higher levels of service and repairs, to include brakes, suspensions, air conditioners, electrical, as skills are developed; * Support and assist in the performance of all maintenance and repairs on the vehicle fleet "in house" when possible; * Assists in making major repairs to body, chassis, engines and other component systems. * Perform basic PMI service tasks such as oil and filter changes, fluid level checks, safety inspections, and minor repairs; * Assist in the movement of vehicles, and schedule and coordinate all out-of-service vehicles with the Fleet Manager or designee; * Assist in the maintenance of cleanliness and proper appearance of vehicle fleet, passenger shelters, benches, and immediate grounds, and all office and shop space; * Assist in the assembly and placement of benches and trash containers and installation/replacement of Bus Stop route signs as required; * Assist in the maintenance and changing out of advertising displays inside and outside of buses, on passenger shelters and benches, and on other displays as directed by the Fleet Manager or designee; * Assist in preparing new vehicles for placement into service; * Diagnose and perform maintenance, service, and repair of all equipment and components of The HOP facilities, regardless of type, as directed; * Maintain an organized and orderly work area; * Maintain vehicle maintenance records as required; * Serve as lead mechanic in the absence of the Class A and direct work flow as required. Other Duties/Responsibilities * Assist in maintenance and proper storage of cleaning supplies and equipment, and notifying Fleet Manager of needs; * Maintain orderliness of supplies; * Maintain safety in all duties; * Assist with new driver orientation and training of urban drivers; * Assist Fleet Manager and other supervisory personnel as needed; * Perform other duties as assigned by the Fleet Manager. Minimum Requirements (Mandatory for Hiring) * Any combination of education and experience that would provide the required skills and knowledge for successful performance; * Knowledge of mechanics and relevant skills; * Knowledge of fleet A/C systems; * Must have mechanic tools; * Organizational abilities; * Oral and written communication skills; * Ability to deal with stress and to meet deadlines; * Ability to handle diverse multiple responsibilities; * Ability to work independently, as well as in a group; * Ability to efficiently and effectively complete tasks with minimal supervision; * Must be self-motivated; * Must have the ability to drive a vehicle and have a clear driving record; * Must pass a criminal record check; * Must receive a negative drug test result; * Must pass a D.O.T. physical; * Ability to effectively communicate and work with others; * Ability to maintain accurate records; * Ability to deal with problems constructively. * Must have a valid CDL permit and have already successfully passed the following (5) skills tests and be ready to take road test and take Passenger Endorsement and Air Brake Endorsement within 30 days of hire: * General Knowledge Test * Passenger Endorsement Test * Air Brake Test * Pre-Trip Test * Special Requirement Test Skills That May Be Taught On the Job * Vehicle and fleet systems and components - repair and diagnostic skills; * Policies and procedures relating to HCTD; * Completion of required paperwork. RELATIONSHIP SKILLS * Ability to work cooperatively and productively with supervisors, co-workers, professionals, and groups of persons at all levels of activity; * Ability to communicate effectively, both verbally and in writing; * Ability to perform tasks effectively and efficiently; * Ability to plan and schedule work and implement directives without constant supervision; * Ability to present a professional appearance and conduct when representing the system. PERFORMANCE CONDITIONS IMMEDIATE SUPERVISOR: HCTD Urban Fleet Manager WORK SITE LOCATION: Belton REGULAR WORKING HOURS: 5am - 2pm or 11am - 8pm IRREGULAR WORKING HOURS REQUIRED: Yes WORK ALONE: No JOB REQUIRES OUT-OF-TOWN AND/OR OVERNIGHT TRAVEL: Rarely HAZARDOUS CONDITIONS: None Supplemental Requirements This position is classified as safety-sensitive and is required to undergo and successfully pass pre-employment drug and/or alcohol testing. The duties listed above are intended only as general illustrations of the various types of work that may be performed. Specific statements of duties not included does not exclude them from the position if the work is similar, related, or a logical assignment to the position. Job descriptions are subject to change by HCTD as the needs of the HCTD and requirements of the job change. Prepared by: Hill Country Transit District Human Resources Department Hill Country Transit District is an Equal Opportunity Employer

Roles and Responsibilities: Perform diagnostic, troubleshooting and repair tasks on vehicles, equipment and trailers Completion of preventative maintenance tasks including oil changes, brake jobs, etc. Troubleshooting and repair of electrical issues especially wiring harnesses and lighting Coordinating with the Shop Foreman to prioritize and expedite repairs Document repair and maintenance work on vehicles, trailers and equipment in accordance with company processes Ensure DOT compliance on all fleet items Entering data into fleet computer system for tracking and vehicle profiles Operate all company vehicles and equipment in a safe manner Communicate effectively an professionally with all company and vendor personnel Maintain general shop safety and cleanliness standards Success Factors: Able to disassemble engines and evaluate for efficient and cost-effective repairs Familiar with DOT requirements and inspection processes Able to complete paperwork accurately and legibly for required tracking of all maintenance and repair activities per company policies Good computer skills (parts ordering, email, internet navigation) Must provide own tools Ability to stand, walk, stoop, kneel and bend constantly throughout the day Ability to work with hand tools and power tools in both strength and fine manipulation scenarios Ability to lift 0-20 lbs. constantly, 21-50 lbs. frequently, and 50-75 lbs. occasionally Must be able to work indoors and out in all types of weather as needed Experience and Education: 2 years of experience in fleet and construction equipment diagnosis, troubleshooting and repair of both gasoline and diesel engines Experienced with electrical, hydraulic and suspension systems Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver's License is required within two weeks of employment. Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the repair and maintenance of pipelines, equipment and performance of work associated with daily operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, troubleshoot, repair, and operate compressor station or pump station equipment, plant facilities and pipeline facilities including: prime movers and compressors, valves, filters, separators, dehydrators, pumps, and auxiliary equipment in order to meet production and product throughput requirements in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Plan, organize, prioritize, communicate, and coordinate work with employees and contractors to validate the work is completed in a safe, timely, and effective manner * Provide budgetary information, schedule work and outages, order materials, maintain inventory, and coordinate needed resources * Interpret and utilize drawings, schematics, loading/pump curves, OEM manuals, and other technical resources in the performance of assigned work * Effectively and safely use hand tools, power tools, and portable and mobile work equipment in hazardous, classified, and non-hazardous environments * Utilize precision measurement equipment to determine dimensions and set operating equipment clearances and tolerances * Maintain equipment records, logs, inventory, and other documentation required by the Partnership's procedures and regulatory agencies * Provide training and leadership to develop and maintain effective work crews, dependent upon level hired * Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.) * Maintain facilities, grounds, and work areas in a safe, orderly, and efficient manner * Actively participate and provide leadership in safety programs and initiatives while following policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record and ability to be certified as a USDOT driver under FMCSA may be required based on applicable law, reporting location, and geographic work area * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Occasional exposure to heat, cold, and other adverse weather conditions * Work may include confined spaces and may require heavy lifting in excess of 75 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment (which may include, but may not be limited to, necessary respirators) * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position is responsible for the repair and maintenance of pipelines, equipment and performance of work associated with daily operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, troubleshoot, repair, and operate compressor station or pump station equipment, plant facilities and pipeline facilities including: prime movers and compressors, valves, filters, separators, dehydrators, pumps, and auxiliary equipment in order to meet production and product throughput requirements in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Plan, organize, prioritize, communicate, and coordinate work with employees and contractors to validate the work is completed in a safe, timely, and effective manner * Provide budgetary information, schedule work and outages, order materials, maintain inventory, and coordinate needed resources * Interpret and utilize drawings, schematics, loading/pump curves, OEM manuals, and other technical resources in the performance of assigned work * Effectively and safely use hand tools, power tools, and portable and mobile work equipment in hazardous, classified, and non-hazardous environments * Utilize precision measurement equipment to determine dimensions and set operating equipment clearances and tolerances * Maintain equipment records, logs, inventory, and other documentation required by the Partnership's procedures and regulatory agencies * Provide training and leadership to develop and maintain effective work crews, dependent upon level hired * Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.) * Maintain facilities, grounds, and work areas in a safe, orderly, and efficient manner * Actively participate and provide leadership in safety programs and initiatives while following policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record and ability to be certified as a USDOT driver under FMCSA may be required based on applicable law, reporting location, and geographic work area * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self- starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Occasional exposure to heat, cold, and other adverse weather conditions * Work may include confined spaces and may require heavy lifting in excess of 75 lbs with or without assistance * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment (which may include, but may not be limited to, necessary respirators) * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required * Must live within 40 miles of reporting location