Inspector jobs at Volt Systems LLC

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description Located in Kent Washington, Protective Coatings Inc. is a leading provider of full service finishing for the aerospace, electronics and medical industries in both commercial and defense applications. Services include but are not limited to non-destructive testing such as fluorescent penetrant and magnetic particle inspection and a wide variety of surface enhancement processes such as shot peening and abrasive blasting, passivation, cadmium and nickel zinc plating, chromic, sulfuric and boric sulfuric acid anodizing and the application of chromate conversion coating on ferrous and non-ferrous alloys. Organic coating includes the application and testing of multiple resin systems such as epoxies, phenolics, polyurethanes, polyesters, elastomerics, intumescents, lacquers, alkyds, acrylics, dry-film lubricants, powder coatings and Teflon. Current approvals include the National Aerospace and Defense Contractors Accreditation Program, (NADCAP), Boeing Commercial Aircraft Company, Boeing Defense and Space, Boeing/Philadelphia, Boeing Long Beach, Grumman, Gulfstream, Lockheed Martin, Goodrich, Bombardier, Cessna and Sikorsky among much else. Founded in 1976, Protective Coatings Inc. was later acquired by Precision Castparts in 2012, and became part of the Aerostructures Division. As a defense contractor Protective Coatings Inc. is registered with the Directorate of Defense Trade Controls as a subsidiary of Precision Castparts Corp and is fully compliant with all relevant facets of the International Traffic in Arms Regulations and the Export Administration Regulations. Position Summary: Candidates for NDT Inspector Level 3 will possess the skills and knowledge to perform all the duties of a trainee, Level 1-Limited and Level 2, and can also independently inspect parts, make evaluations, perform required process tests and document results. Selected candidates as a Level 3 Inspector shall be knowledgeable in all NDT methods used by Protective Coatings and have familiarity with other NDT methods as represented in Level 3 ASNT testing. A Level 3 Inspector shall at times perform inspections on chemically treated metallic and nonmetallic parts and assemblies under fluorescent or black lighting for defects such as fissures, weld breaks, or fractures using magnetic particle inspection (MAG) and liquid penetrant inspection (FPI) processes and equipment. The Level 3 will be responsible for maintaining all NDT training, qualification, certification, and performance levels of active NDT personnel. Candidates must be self-disciplined and self-motivated individuals with strong accountability (attention to details) skills. Candidates of this position must have strong leadership qualities, excellent communication skills, and the ability to work in a team environment. A Level 3 candidate will be expected to perform a variety of tasks and supervisory roles which include but are not limited to: performing specific calibrations, tests and evaluations on production aerospace parts; perform Formal and Practical training; establish and approve written NDT procedures and work instructions; assigning and directing work. As a condition of assignment, Level 3 candidates may be expected to process product controlled under in International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). As such, these candidates may be required to provide proof of U.S. Citizenship, Legal Permanent Residence or protected status as a Non-Citizen National of the U.S. Primary Duties & Responsibilities: * Supports supervision of 10-30 employees in the NDT/MAG/Penetrant areas. Carries out responsibilities in accordance with the organization's policies and applicable laws. * Conduct or direct the training, examination and certification of personnel in the method certified. * Establish and approve NDT procedures and other NDT related work instructions for technical adequacy and compliance to requirements. * Maintain and review NDT personnel qualification and certification files and review performance levels of active NDT personnel. * Examines parts under fluorescent or black lighting to detect surface defects using one of two methods: FPI (Fluorescent Penetrant Inspection) or (MAG) Magnetic Particle Inspection. * Provide detailed information concerning processing techniques, findings, evaluation of indications and part condition/disposition recommendations. * Actively participate and assist in, and appropriately respond to NDT system auditing (internal and external). * Reviews NDT process Rejection Reports. * Set up and calibrate equipment, conduct tests, and interpret, evaluate, and document inspection results. * Will require use of personal protective equipment (PPE) during certain tasks (goggles, safety glasses, aprons, boots, gloves, hearing protection, etc) and be expected to comply with safety directives and policy. * Will be exposed to chemicals/solvents and occasional fumes, wet/humid conditions, low-level lighting, and moderate noise level. * Will, at times require heavy lifting or use of mechanical hoist for the aid in lifting objects. * Work closely with inspectors and Management to complete work and prioritize tasks. * Clean, organize and maintain work area as prescribed by supervision. Required Skills: * Ability to independently perform and train personnel in all the duties of an NDT Helper (entry level position), Level 1-Limited Operator, and Level 2 Inspector. * Specific vision abilities required by this job include close vision, color vision and peripheral vision. The ability to successfully pass a Jaeger eye exam with corrected or uncorrected vision. * Familiarity of codes, standards, and specification such as NAS 410, BSS 7698 and BAERD GEN-012. * Blueprint reading and interpretation skills pertaining to aerospace production detail parts and sub-assemblies. * Basic mathematic skills: add, subtract, multiply and divide using whole numbers, common fractions and decimals. * Ability to interpret and explain an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables,

FORTNA partners with the world's leading brands to transform omnichannel and parcel distribution operations. Known world-wide for enabling companies to keep pace with digital disruption and growth objectives, we design and deliver solutions, powered by intelligent software, to optimize fast, accurate and cost-effective order fulfillment and last mile delivery. Our people, innovative approach and proprietary algorithms and tools ensure optimal operations design and material and information flow. We deliver exceptional value every day to our customers with comprehensive services and products including network strategy, distribution center operational design and implementation, material handling automated equipment, robotics and a comprehensive suite of lifecycle services. At FORTNA, we believe in fostering a workplace that isn't just a job but a movement - a collective effort to redefine success and transform challenges into opportunities. "Join the Movement" encapsulates our commitment to a workplace culture that thrives on collaboration, celebrates diversity, and empowers every individual to contribute to something greater than themselves. Our Team. Our Passion. Our Approach. JOB SUMMARY: The Quality Inspector will be responsible for inspection of cut, formed, weld fabricated, machined or assemblies for adherence to engineering drawings. ESSENTIAL FUNCTIONS: 1. Interpretation and understanding of shop drawings to determine if a part is made to print. Examples are: o Weld symbols o Geometric dimensioning and tolerancing symbols o Print legend and notation 2. The ability to use measuring instruments to verify whether a product is conforming to shop drawings. Examples include Micrometer, Caliper, Jo blocks, Pin gage, Tape measure, Dial indicator 3. Manual Dexterity and ability to lift to 30 lbs. 4. Must be able to distinguish color in this position and the ability to read small print and distinguish fine details. 5. Reading skills to understand instructions, plans, or purchase orders. 6. Good communication skills enabling verbal and written communication using active listening and learning. 7. Tasks include but are not limited to: o Process Production reject tags, issuing a Quality Hold. o File Maker system for accurate product disposition with basic computer skills. o Issue Quality Hold for all nonconforming material. o Help investigate out of process activities and assist with containment of nonconforming material. o Review process check sheets for completeness. o Data collection with part verification inspection o Audit defined processes for adherence to the process. QUALIFICATIONS: 1. High school diploma (or GED). 2. Prior manufacturing experience, with some aspect of Quality inspection (preferred). 3. Prior experience in metal fabrication a plus or welding/layout experience (preferred). 4. Basic blueprint reading skills and welding symbols. 5. The ability to use basic computer programs such as Word, Excel, PowerPoint, and Outlook. (preferred) 6. Must have ability to use appropriate tools related to the task. This describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Starting pay will be $21.00 This job description describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Employees may be required to perform any other job-related duties as requested by their supervisor. It is the policy of FORTNA and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, FORTNA will provide reasonable accommodations for qualified individuals with disabilities.

FORTNA partners with the world's leading brands to transform omnichannel and parcel distribution operations. Known world-wide for enabling companies to keep pace with digital disruption and growth objectives, we design and deliver solutions, powered by intelligent software, to optimize fast, accurate and cost-effective order fulfillment and last mile delivery. Our people, innovative approach and proprietary algorithms and tools ensure optimal operations design and material and information flow. We deliver exceptional value every day to our customers with comprehensive services and products including network strategy, distribution center operational design and implementation, material handling automated equipment, robotics and a comprehensive suite of lifecycle services. At FORTNA, we believe in fostering a workplace that isn't just a job but a movement - a collective effort to redefine success and transform challenges into opportunities. "Join the Movement" encapsulates our commitment to a workplace culture that thrives on collaboration, celebrates diversity, and empowers every individual to contribute to something greater than themselves. Our Team. Our Passion. Our Approach. The Quality Inspector will be responsible for inspection of cut, formed, weld fabricated, machined or assemblies for adherence to engineering drawings. ESSENTIAL FUNCTIONS: Interpretation and understanding of shop drawings to determine if a part is made to print. Examples are: Weld symbols Geometric dimensioning and tolerancing symbols Print legend and notation The ability to use measuring instruments to verify whether a product is conforming to shop drawings. Examples include Micrometer, Caliper, Jo blocks, Pin gage, Tape measure, Dial indicator Manual Dexterity and ability to lift to 30 lbs. Must be able to distinguish color in this position and the ability to read small print and distinguish fine details. Reading skills to understand instructions, plans, or purchase orders. Good communication skills enabling verbal and written communication using active listening and learning. Tasks include but are not limited to: Process Production reject tags, issuing a Quality Hold. File Maker system for accurate product disposition with basic computer skills. Issue Quality Hold for all nonconforming material. Help investigate out of process activities and assist with containment of nonconforming material. Review process check sheets for completeness. Data collection with part verification inspection Audit defined processes for adherence to the process. QUALIFICATIONS High school diploma (or GED). Prior manufacturing experience, with some aspect of Quality inspection (preferred). Prior experience in metal fabrication a plus or welding/layout experience (preferred). Basic blueprint reading skills and welding symbols. The ability to use basic computer programs such as Word, Excel, PowerPoint, and Outlook. (preferred) Must have ability to use appropriate tools related to the task. This describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. 1st shift - This position offers a base hourly rate of $21.00. This job description describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Employees may be required to perform any other job-related duties as requested by their supervisor. It is the policy of FORTNA and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, FORTNA will provide reasonable accommodations for qualified individuals with disabilities.

Join Kyocera International, Inc. We're hiring an Inspector 1 at our Vancouver, WA ! Salary Range: $17 - $21 hourly (Final offer based on experience, education, skills, and market factors) Why Kyocera? With nearly 80,000 employees worldwide, Kyocera is a global leader in advanced ceramic technologies used in aerospace, automotive, medical, and semiconductor industries. Our materials power everything from smartphones to space shuttles - and we're just getting started. What Makes Us Stand Out? We don't just offer jobs - we offer careers with purpose, stability, and growth. Here's what you can expect: Generous Time Off * 3 weeks of vacation to start (120 hours/year) * 10 paid holidays annually Financial Wellness * Competitive pay * 401(k) with company match * Employer-paid pension plan Comprehensive Health Coverage * Medical, dental, and vision insurance * Life insurance * Flexible Spending Account (FSA) * Employee Assistance Program (EAP) Investing in You * Tuition reimbursement * Paid time off to volunteer * Flexible schedules Work-Life Balance & Culture * Onsite gyms, walking tracks, and employee gardens at larger locations * Long-tenured team (many with 30+ years of service!) * Inclusive and diverse workforce * A company philosophy rooted in doing the right thing as a human being Our Philosophy Kyocera's culture is deeply inspired by our founder, Dr. Kazuo Inamori. His values guide our decisions and shape our workplace. Learn more about our guiding principles here: Kyocera Values Ready to Make a Difference? Apply today and become part of a team that's shaping the future - one innovation at a time. GENERAL DESCRIPTION OF POSITION The inspector 1 is responsible for the handling, measurement, visual inspection, correction, and cleaning of parts. May carry out inspection duties in any or all the following areas: incoming parts, in-process, final inspection before shipment and in audits. Inspector also records data and ensures product meets all design and quality requirements in the work order. REQUIREMENTS High school diploma or equivalent 0-6 months experience in a manufacturing environment Ability to read or be trained to read and comprehend verbal and written instructions in English Ability to add, subtract, multiply to determine tolerances Vision and depth perception suitable for use of inspection microscopes 20/20 corrected vision - varies by division Willingness to wear finger cots, masks, and/or clean-room apparel Ability to either stand or sit for extended periods Ability to bend, push, pull, reach, grab, turn, twist, and/or stoop Ability to grab small parts or hand tools with hands/ fingers Ability to lift and/or carry up to 50 lbs. depending on the specific function. ability to work with frequent interruptions and changing priorities eligible to work in an ITAR environment ESSENTIAL DUTIES AND RESPONSIBILITIES * Visual inspection of various parts to verify adherence to customer specifications and/or work order. * May visually inspect with a variety of tools including assisting with fluorescent penetrate inspection (FPI) water wash. * May cross train in other areas of quality or packaging and fill in when needs arises. * Uses various dimensioning tools daily and various handheld digital measuring devices. * Also, may be trained on CMM, optical comparator, and various other tools. Will treat equipment in a safe and protective manner to ensure it lasts and is undamaged. * Knowledgeable of basic Excel and able to accurately enter data into spreadsheet without data entry or decimal errors. * Visually inspects irregular sized parts using microscope, calipers, micrometer, and optical comparator as needed. * Complies with applicable requirements of Kyocera International, Inc. policy, ISO 9000, ISO 14001 requirements, ITAR regulations. * Participates in company 5S and safety program. Cleans work area and organizes lab as needed. * Reads specifications and mechanical drawings to ensure understanding. Asks questions when unclear. Should have the ability to concentrate on tasks for long periods of time. Perform any other related duties as required or assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. PHYSICAL ACTIVITIES The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is continuously required to talk or hear; regularly required to sit; frequently required to stand, walk, use hands to finger, handle, or feel, reach with hands and arms; and occasionally required to stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds, frequently lift and/or move up to 25 pounds, regularly lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus. ENVIRONMENTAL CONDITIONS The following work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the functions of this job, the employee is occasionally exposed to work near moving mechanical parts, work in high, precarious places, fumes or airborne particles. The noise level in the work environment is usually moderate. ADDITIONAL INFORMATION The above statements are intended to describe the work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. The duties and responsibilities of this position are subject to change and other duties may be assigned or removed at any time. This position may require exposure to information subject to US Export Control regulations, i.e.: the International Traffic and Arms Regulations (ITAR) or Export Administration Regulations (EAR). All applicants must be US persons within the meaning of US regulations. Kyocera International, Inc. values diversity in its workforce, and is proud to be an AAP/EEO employer. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, or on the basis of disability. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact Kyocera International, Inc. Human Resources team directly. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Do you have a minimum of five (5) years' experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a full-time first shift Quality Control Inspector in 2025 who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer's aircraft. DUTIES AND RESPONSIBILITES * Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks. * Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed. * Adheres to general work and safety requirements. * May travel to locations other than the Repair Station's fixed location to support customer aircraft. * May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft. * May perform repairs on components removed from the aircraft. * May remove and re-install aircraft components to gain access for the performance of assigned tasks. * May troubleshoot (fault isolation) aircraft system malfunction. * May perform basic mechanical and electrical removals and installations. * Documents, records, and signs for work performed and/or inspected per RSM/QCM. * Perform other related tasks as assigned by supervision. * May fuel and defuel aircraft. * May perform aircraft line services. * Performs inspection on-site and at off-site locations. * Supports production aircraft under Production Certificate System. * Assists other employees in the performance of their duties within area(s) of qualification. * Is familiar with and adheres to the RSM/QCM and applicable regulations. * Is responsible for and accountable for work performed. QUALIFICATIONS * Possess a Mechanics certificate with Airframe and Power plant ratings. * Minimum 5 years' experience in aircraft maintenance and alteration of turbo fan powered business aircraft. * Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations. * Minimum 5 years' experience working on our Falcon models. * Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service. * Able to work unsupervised for extended periods. * Excellent written and verbal communications skills. * Can Do attitude - highly motivated, * Demonstrate excellent customer service skills. * Team player that exhibits and models Dassault Falcon Jet core values and attributes. * Repair Station Training * Applicable Airframe Initial Training * Applicable Engine Training * Applicable Avionics Systems Training * RVSM Training * FAR 91.411/FAR 91.413 Training * Human Factors Training * Performs duties as assigned. Additional Information: This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Full-time Description Who we are looking for... We are seeking a CEI Inspector that will provide field observation, testing and measurement services as liaison with project stakeholders that include the client, engineer, contractor, utility agencies and regulatory authorities during the construction phase of a project. The Inspector will work within a team environment and assist the Team Leader/Senior Inspector in observing, measuring, testing, and documenting the progress, quality, and quantity of work performed by the contractor. Inspector will be responsible for performing inspection, testing and material sampling services for conformance to plans and specifications for all roadway, structure, and specialty items; mostly comprised of asphalt, earthwork, and concrete elements. Inspector shall observe, measure, and record all construction quantities for contractor payment including understanding of mathematical calculations associated with quantity measurement. Measurements shall be in field books for review by the engineer, client, or auditors to ensure they are within contract requirements. The following duties will be required for this position: Outdoor working environment Safe operation of company vehicle Working on uneven terrain Frequent use of ladders Hauling equipment and materials up to 40lbs Working in inclement weather conditions Working independently Repetitive bending/lifting to include overhead Nighttime and Weekend work hours may be required Working on your feet 8 hours a day Overtime work may be required Field measurements and calculations Requirements High School Diploma/GED Must have two (2) years of related experience in construction inspection; one (1) year of which shall have been in bridge and/or roadway construction inspection. Understanding of FDOT construction project administration methods and processes including but not limited to training in MAC, BlueBeam, Hummingbird and Site Manager programs. CTQP Certification in Asphalt, Concrete, Earthwork, pile driving and drilled shafts are required. What you'll need to be successful... Success in this job relies on your time management skills, organization, and positive attitude. In addition, you'll need the following qualifications: Ability to read and interpret construction drawings and specifications, identify discrepancies and/or conflicts, solve problems and develop documentation. Ability to utilize survey equipment to verify field measurements and survey grades during construction, including but not limited to the use of GPS Rovers and Base system, to provide real-time feedback as to whether construction services meet project requirements. Ability to accomplish goals with minimal supervision and work within a team focused environment. Who we are…Trusted Advisors, Creating Community Our firm has assembled a remarkable team encompassing a wide range of experiences and backgrounds. Through collaborative efforts in a supportive environment, we consistently deliver top-notch work of exceptional quality. We prioritize the growth and fulfillment of each team member, providing ample opportunities for professional and personal development. A key factor in this, is our engagement with high-caliber, 'Class-A' projects and esteemed clients. We approach our work with unwavering passion, recognizing the positive impact we have on the communities we serve. ******************************* What we offer… We recognize and reward hard work, we offer a competitive salary, full benefits package, and a potential performance-based bonus. More than four decades ago, England-Thims & Miller, Inc. was founded by three visionaries who wanted to take care of their clients with a focus on boutique, customer-centric, best-in-class services. Today, with the help of over 300, we have built a business around taking care of not only said clients but our communities and team members. What to do next… If England-Thims & Miller, Inc. sounds like the place for you (and if you have the qualifications, drive, and passion to match), we invite you to become a member of our winning team! Once you're part of our ETM family, we'll continue to invest in you as a valuable asset in our company. This job description is representative of typical responsibilities and is not intended to be a complete list of all duties or skills required for the job. It is subject to review and change at any time, with or without notice, in accordance with company needs. ETM is proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Help Us Change the World-One Project at a Time At PRIME AE , we believe every bridge, building, classroom, park, and roadway we design tells a story-and leaves a legacy. Whether it's through architecture, engineering, planning, or consulting, our work is deeply rooted in improving the everyday experiences of people and communities. Join us and be part of a collaborative, forward-thinking team that values innovation, technical excellence, and meaningful contribution. Who We Are: PRIME AE Group, Inc. (***************** is a nationally ranked, full-service architecture and engineering firm with 22 offices across 9 states and a team of 500+ professionals. For nearly two decades, we've partnered with public and private sector clients to deliver creative, practical, and sustainable solutions across transportation, education, healthcare, municipal, federal, commercial, and recreational sectors. We're expanding our capabilities, our geography, and our team-and now is an exciting time to join us. We are currently seeking a CEI Inspector to join our Jacksonville office. What You'll Do: The successful candidate will serve as an Inspector on state and local projects within the Greater Jacksonville area and various local jurisdictions. Work is performed under the general supervision of the Project Administrator. Key Responsibilities: Inspection & Documentation: Monitor daily work and maintain detailed records of construction activities. Testing: Oversee and occasionally conduct necessary field tests. Project Management: Coordinate construction progress to ensure projects are delivered on time and within budget. Public Impact: Manage activities to ensure minimal disruption to the public. Key Responsibilities: Reads contract plans, specifications, shop drawings, and regulatory agency manuals. Reviews project activities with contractor's field supervision to resolve disputes and other project issues. Performing work under the general supervision of the Senior Inspector or Project Administrator/ Project Engineer. Read and interpret construction contract language. Possess current material testing certifications applicable for earthwork, asphalt, concrete, pile driving, drilled shafts, etc. Material testing and documentation of acceptance. Coordinate verification testing. Performs density and asphalt tests; samples and verifies certification of materials. Inspection of and documentation of contractor's quality of work. Tracks quality assurance progress. Monitor on-site construction activities; prepare daily and weekly reports on work accomplished by contractor and track quantities of completed work. Perform field inspection of contractors' operations to confirm compliance with contract documents; prepare inspection reports. Prepare Daily Reports and submit to Senior Inspector on a weekly basis. Maintain detailed accurate records of daily operations and significant events. Prepare sketches and assemble data for Senior Inspector or Project Administrator to utilize when making changes to the project. Participate in the development of job safety practices and observe general job safety practices. Monitor and inspect the Work Zone Traffic Control (in accordance with the client's requirements) Ensure timely completion of time sheets and expense reports. Performs such other duties as the supervisor may from time to time deem necessary. What You'll Bring: High school graduate or equivalent. The ability to earn the required qualifications and certifications within one year. (Note: Engineer Intern classification requires an EI certificate.) Two (2) years of experience in construction inspection, One (1) year of Ability to earn additional required qualifications within one year, as required by job assignments to include: CTQP Final Estimates Level I CTQP Concrete Field Inspector Level I CTQP Asphalt Roadway Level I CTQP Earthwork Construction Inspection Level I CTQP Pile Driving Inspection CTQP Drilled Shaft Inspection Required for inspection of all drilled shafts including miscellaneous structures such as sign, lighting, and traffic signal structure foundations IMSA Traffic Signal Inspector Level I FDOT Intermediate MOT Nuclear Radiation Safety Florida Stormwater, Erosion, and Sedimentation Control Training and Certification Program for Inspectors and Contractors FDOT Intermediate Temporary Traffic Control Good understanding of construction specifications and plans, with ability to read, interpret and explain construction plans, contract provisions, specifications, and inspection procedures. Ability to perform mathematical calculations. Knowledge of FDOT specification and standards. Ability to effectively lead a team of inspectors. Ability to communicate effectively in English (verbally and in writing), and have excellent analytical, technical and communication skills. Ability to work weekends, nights, and swing shifts if required on assigned projects. Ability to lift up to 50lbs. Demonstrated proficiency in the full suite of Microsoft Office programs and Adobe Acrobat. Valid Driver's License and clean driving record Performance Expectations: Complete Annual Individual Training Program. Comply with all PRIME AE policies and procedures. Establish strong working relationships with clients, contractors, and design engineers. Achieve or exceed budgeted individual utilization target. Complete all tasks on time and within budget while fully meeting the scope. Operate within specified (corporate or project) budget parameters. Maintain a positive attitude and collaborative spirit. Why PRIME AE? We don't just offer jobs-we build careers. At PRIME AE, you'll find a culture of support, flexibility, and opportunity. You'll work on impactful projects that improve daily life, alongside colleagues who inspire and challenge you. Whether you're advancing your technical skills or growing as a leader, we're committed to helping you succeed. Full-Career Support : Flexible career paths across disciplines, from technical specialist to project leadership. People-First Culture : We hire top talent, champion diversity, trust, and integrity. Meaningful Impact : Work on projects-from community centers and hospitals to federal, transportation, and water systems-that tangibly improve lives. Growth-Oriented : Strategically expanding capabilities and geography (e.g., Southeast acquisition, federal growth) with strong backing from investors. National Yet Local : Enjoy the resources of a big firm with the agility and client intimacy of local offices. PRIME AE Group celebrates diversity and is committed to creating an inclusive environment for all employee #LI-HYBRID

Full-time Description Who we are looking for... We are seeking a CEI Inspector that will provide field observation, testing and measurement services as liaison with project stakeholders that include the client, engineer, contractor, utility agencies, and regulatory authorities during the construction phase of a project. The Inspector will work within a team environment and assist the Team Leader/Senior Inspector in observing, measuring, testing, and documenting the progress, quality, and quantity of work performed by the contractor. Inspector will be responsible for performing inspection, testing and material sampling services for conformance to plans and specifications for all roadway, structure, and specialty items; mostly comprised of asphalt, earthwork, and concrete elements. The Inspector shall observe, measure, and record all construction quantities for contractor payment including understanding of mathematical calculations associated with quantity measurement. Measurements shall be in field books for review by the engineer, client, or auditors to ensure they are within contract requirements. The following duties will be required for this position: Outdoor working environment Safe operation of company vehicle Working on uneven terrain Frequent use of ladders Hauling equipment and materials up to 40lbs Working in inclement weather conditions Working independently Repetitive bending/lifting to include overhead Nighttime and Weekend work hours may be required Working on your feet 8 hours a day Overtime work may be required Field measurements and calculations Requirements High School Diploma/GED Must have two (2) years of related experience in construction inspection; one (1) year of which shall have been in bridge and/or roadway construction inspection. Understanding of FDOT construction project administration methods and processes including but not limited to training in MAC, BlueBeam, Hummingbird and Site Manager programs. CTQP Certification in Asphalt, Concrete, Earthwork, pile driving and drilled shafts are required. What you'll need to be successful... Success in this job relies on your time management skills, organization, and positive attitude. In addition, you'll need the following qualifications: Ability to read and interpret construction drawings and specifications, identify discrepancies and/or conflicts, solve problems and develop documentation. Ability to utilize survey equipment to verify field measurements and survey grades during construction, including but not limited to the use of GPS Rovers and Base system, to provide real-time feedback as to whether construction services meet project requirements. Ability to accomplish goals with minimal supervision and work within a team focused environment. Who we are…Trusted Advisors, Creating Community Our firm has assembled a remarkable team encompassing a wide range of experiences and backgrounds. Through collaborative efforts in a supportive environment, we consistently deliver top-notch work of exceptional quality. We prioritize the growth and fulfillment of each team member, providing ample opportunities for professional and personal development. A key factor in this, is our engagement with high-caliber, 'Class-A' projects and esteemed clients. We approach our work with unwavering passion, recognizing the positive impact we have on the communities we serve. ******************************* What we offer… We recognize and reward hard work, we offer a competitive salary, full benefits package, and a potential performance-based bonus. More than four decades ago, England-Thims & Miller, Inc. was founded by three visionaries who wanted to take care of their clients with a focus on boutique, customer-centric, best-in-class services. Today, with the help of over 300, we have built a business around taking care of not only said clients but our communities and team members. What to do next… If England-Thims & Miller, Inc. sounds like the place for you (and if you have the qualifications, drive, and passion to match), we invite you to become a member of our winning team! Once you're part of our ETM family, we'll continue to invest in you as a valuable asset in our company. This job description is representative of typical responsibilities and is not intended to be a complete list of all duties or skills required for the job. It is subject to review and change at any time, with or without notice, in accordance with company needs. ETM is proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Full-time Description Aviation company in Miami is looking for a full time, hardworking and motivated individual to join our Quality team. Essential Functions: Develops methods and write detailed instructions for inspection processes. Direct involvement with maintaining FAA and AS9100 standards and other quality accreditations. Use standard electrical and mechanical measurement devices Document inspections Use MS Office products to update test and inspection documents, reports, charts, checklists and databases Maintain and inspect repair station to FAA regulatory guidelines. Align process documentation with process capabilities. Analyze and implement customer requirements into existing systems and processes. Coordinates the calibration of equipment and the ordering of testers, gauges, and equipment to support product acceptance Maintain our technical library, ensuring all component maintenance manuals are within revision along with all Air worthy directives, service bulletins, etc. Will be assisting with creating and implementation of corrective action reports, addendums to manuals, trainings through the facility. Other duties as assigned Requirements Knowledge, Skills, and Experience: High school diploma or equivalency certificate. Minimum of 2-years in quality assurance, aerospace quality control inspection Advanced knowledge of inspection techniques and instruments. Read, interpret and support development of engineering drawings Proficient with Microsoft office, word and Excel. The review of all traceable parts to sources 121, 129, 145, 135, and OEM's Knowledge and understanding of FAR (Federal Aviation Regulations) Experience is acceptable but not a requirement as the company is willing to provide OJT Requires training in inspection techniques and principles Ability to work in a fast-paced environment and meet deadlines. Must be able to convey accurate notes and messages Excellent organizational skills Strong interpersonal and problem-solving abilities. Ability to manage complex projects and multi-task. Highly responsible and reliable. To keep our employees as safe as possible, we are following CDC recommendations in order to keep a safe working environment. Salary Description $20 to $25 per hour

Job Details Experienced Corporate Headquarters Miami - Doral, FL Undisclosed N/A Full Time High School Undisclosed None Undisclosed WarehouseDescription For nearly 30 years, DASI has been in the business of providing comprehensive aircraft inventory support for airlines, MROs, OEMs, and distributors. Headquartered in Miami, Florida, with service centers in London and Singapore, DASI is a truly global partner, serving customers' parts and inventory needs in more than 140 countries. DASI is embracing the potential of online sales and their digital marketplace, which has been growing exponentially and has tremendous potential with the right technology team in place to support and take it to the next level. Purpose: At DASI, the Inbound Inspector is responsible for ensuring that all incoming material (and the related paperwork) meets the quality inspection standards in accordance with DASI's Quality Management System (QMS). Key accountabilities: Perform visual inspections of incoming parts and materials. Inspect and identify material and related documentation as prescribed by the purchase/repair order, highlighting any non-conformance or omission. Perform review of physical attributes, quantity, and records for release. Enter, verify, and validate the accuracy of data input into the DASI database. Comply with ESD (electrostatic discharge) requirements when receiving ESD material. Work with Quality Assurance department in continuous improvement projects. Perform all other duties as assigned. Key skills and competences: Focus on delivering exceptional customer service. Flexible, responsive, and enthusiastic. Able to cope well under pressure and resolve issues and problems using their own initiative. Able to work effectively to tight deadlines and targets. Able to work in a fast-moving environment where a pro-active, can-do attitude is needed to achieve goals. Knowledge of MS Office Suite or equivalent. Excellent verbal and written communication skills. Able to liaise with all levels of the organization. Demonstrated professional style. Experience and qualifications: High School Graduate or GED- Required. Minimum 1 year processing aviation surplus parts is required. Minimum 1 year job related experience is helpful. ISO and/or AS Quality Standard knowledge- a Plus. DASI, LLC. and group companies are an Equal Opportunities Employer

Job Details Experienced Corporate Headquarters Miami - Doral, FL Undisclosed N/A Full Time High School Undisclosed None Undisclosed WarehouseDescription For nearly 30 years, DASI has been in the business of providing comprehensive aircraft inventory support for airlines, MROs, OEMs, and distributors. Headquartered in Miami, Florida, with service centers in London and Singapore, DASI is a truly global partner, serving customers' parts and inventory needs in more than 140 countries. DASI is embracing the potential of online sales and their digital marketplace, which has been growing exponentially and has tremendous potential with the right technology team in place to support and take it to the next level. Purpose: At DASI, the Outbound Inspector is responsible for ensuring that all outgoing material (and the related paperwork) meets the quality inspection standards in accordance with DASI's Quality Management System (QMS). Key accountabilities: • Perform visual inspections of outgoing parts and materials. • Inspect and identify material and related documentation as prescribed by the sales/repair order, highlighting any non-conformance or omission. • Perform review of physical attributes, quantity, and records for release. • Enter, verify, and validate the accuracy of data input into the DASI database. • Issue DASI material certification, as required. • Comply with ESD (electrostatic discharge) requirements when inspecting ESD material. • Work with Quality Assurance department in continuous improvement projects. • Perform all other duties as assigned. Key skills and competences: • Focus on delivering exceptional customer service. • Flexible, responsive, and enthusiastic. • Able to cope well under pressure and resolve issues and problems using their own initiative. • Able to work effectively to tight deadlines and targets. • Able to work in a fast-moving environment where a pro-active, can-do attitude is needed to achieve goals. • Knowledge of MS Office Suite or equivalent. • Excellent verbal and written communication skills. • Able to liaise with all levels of the organization. • Demonstrated professional style. Experience and qualifications: • High School Graduate or GED- Required. • Minimum 1 year processing aviation surplus parts is required. • Minimum 1 year job related experience is helpful. • ISO and/or AS Quality Standard knowledge- a Plus. DASI, LLC. and group companies are an Equal Opportunities Employer

We are currently seeking commercial ICC certified Special Inspectors and Construction Materials Testing Technicians for our offices in the South Florida area. Primary duties will include performing structural building inspections and QC tests (soils, masonry, reinforced concrete, structural steel, post-tensioning, fireproofing, etc.). Some travel may be required. The position will be predominately field located. Essential Functions For these positions the employees will be providing quality control testing and ICC special inspection duties for commercial, retail, educational, low to high-rise, manufacturing, etc. construction projects. Successful candidates must perform on site observations/inspections to confirm compliance with the local building code and project contract documents, collect samples per ASTM & project requirements, perform specific QC tests on construction materials and building components per ASTM, ACI, etc. standards, and maintain detail records of observations, inspections and test results. Work is generally performed unsupervised (i.e. employee is in the field as the Company's representative) but under the direction of a Professional Engineer or Project Manager. Minimum Qualifications, Experience and Education * ICC Certifications in Soils, Structural Concrete, Post-tensioning, Masonry, Fireproofing (preferred candidate would have all 5 certifications, but all are not absolutely required) * ACI Level I (minimum) for concrete sampling/testing * NICET Level II in soils * Radiation safety trained for the use of Nuclear Density Gauges. * 1+ years' experience performing multi-discipline special inspections & tests * High School diploma or equivalent education * The ability to read plans & specifications * Excellent communication skills (both oral and written) * A sound working knowledge of local building codes * Valid State Driver's license with clean driving record NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.

NOVA Engineering is seeking an ICC Special Inspector (Reinforced Concrete & Masonry) for our Pensacola, FL office. Responsibilities: * Structural inspections for rebar, masonry, post-tensioning, and foundations * Performing field materials testing of soil, concrete, and asphalt * Preparing detailed and complete field reports with all relevant test results and inspections/observations provided * Performing laboratory tests on soil and concrete and preparing reports of results * Evaluating site and subgrade conditions on construction projects and providing recommendations * Communicating with clients, contractors, and engineering and technician staff regarding construction issues Qualifications: * ICC Reinforced Concrete and /or Structural Masonry is required (at least one) * ICC Bolting and Welding a plus * ACI Level I Concrete Field Testing certification a plus * Ability to learn to read and interpret plans, specifications, safety rules, operating and maintenance instructions, and procedure manuals Check out our Perks: In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits: * Use of take-home Company Vehicle with gas card for daily travel to work sites * Comprehensive group medical insurance, including health, dental and vision * Opportunity for professional growth and advancement * Certification reimbursement and incentive program with pay increases * Paid time off * Company-observed paid holidays * Company paid life insurance for employee, spouse and children * Company paid short term disability coverage * Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection * 401K retirement with company matching of 50% on the first 6% of employee contributions * Wellness program with incentives * Employee Assistance Program NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Job Description Quality Inspector Primary Function: The Quality Inspector is responsible for following Genesys Industries procedures to conduct the first article, in-process and final inspection on produced or procured mechanical and machined parts to ensure parts are defect-free. Report directly to General Manager. Use of all hand-held metrology equipment (Plug gages, Ring gages, Calipers, Micrometers, etc.) a must. Maintain all quality records in ERP System, operating automated equipment a Keyence Vision system is a plus. But willing to train. Responsibilities and Duties: Communicate quality or compliance concerns with urgency. Perform first article, in-process & final inspection on parts utilizing inspection equipment. Use knowledge of GD&T, QA methods & standards, inspection procedures & QA work instructions Update and maintain inspection documents. Ensure quality lab has calibrated inspection equipment. Support, understand and comply with all safety policies and procedures. Provide quality inspection of parts received from outside vendors. Requirements: Work weekdays Monday thru Friday 8AM-5PM Minimum 2 years' experience in Quality Inspection Experience using measurement instruments: comparators, calipers, micrometers etc. Must have good written and verbal English communication skills. Good arithmetic skills Prefer working knowledge of industry standards AS9100, ISO13485 &/or ISO900 High School Diploma or equivalent Ability to work in quality lab. Benefits Competitive Hourly Salary based on experience Matching 401(k) contribution up to 4% Paid Time-off and Nine (12) Paid Holidays Medical Insurance Dental Insurance Vision Insurance Physical Demands While performing the duties of this job, the employee may be required to walk, stand, sit and use hands to finger, handle, or feel parts. The employee is frequently required to reach with hands and arms and occasionally required to climb or balance; stoop, kneel, and crouch. The employee must regularly lift and /or move up to 15 pounds, frequently lift and/or move up to 50 pounds or more with appropriate assistance. Must be able to be on feet (not sitting) up to 40% of the time.

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent (1099 Sub-Contractor) Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Job DescriptionBenefits: Bonus based on performance Competitive salary Opportunity for advancement We are seeking a detail-oriented and dependable Field Quality Control Inspector to join our team. This role involves walking residential construction sites to ensure all work meets established quality standards and complies with client and regulatory requirements. The ideal candidate will have hands-on experience in construction inspections and a strong understanding of residential building practices. Key Responsibilities: Conduct daily field inspections at residential job sites to verify that work meets quality, safety, and compliance standards Inspect construction activities such as trenching, conduit installation, grounding, structural mounting, and equipment placement Ensure contractors adhere to approved specifications, codes, and client requirements Document inspection findings using detailed field notes, reports, and photo documentation Identify deficiencies or deviations and communicate corrective actions to the appropriate team Coordinate with project managers, subcontractors, and utility representatives to resolve issues in the field Ensure proper use and handling of materials and equipment on-site Maintain organized and up-to-date records of all inspections and communications Travel between job sites as required Qualifications: Previous experience in field inspection, construction, or utility-related work (OSP/telecom/electrical a plus) Strong understanding of residential construction processes and safety standards Ability to read and interpret construction drawings, site plans, and specifications Comfortable working outdoors and walking sites daily in various weather conditions Excellent communication and reporting skills Detail-oriented with a proactive approach to identifying and resolving issues Valid drivers license and reliable transportation Job Type: Full-time, Permanent (1099 Sub-Contractor) Pay: $21$25 per hour (based on experience) Expected Hours: 40 per week Schedule: 8-hour shift Day shift Monday to Friday Work Location: Field-based (on the road; residential job sites)

Job Details Corporate Headquarters Miami - Doral, FLDescription For nearly 30 years, DASI has been in the business of providing comprehensive aircraft inventory support for airlines, MROs, OEMs, and distributors. Headquartered in Miami, Florida, with service centers in London and Singapore, DASI is a truly global partner, serving customers' parts and inventory needs in more than 140 countries. DASI is embracing the potential of online sales and their digital marketplace, which has been growing exponentially and has tremendous potential with the right technology team in place to support and take it to the next level. Purpose: At DASI, the role of the QC Inspector is to ensure that all incoming and outgoing material is being checked for compliance to customer and/or DASI standards. Key accountabilities: Investigate NCM (Nonconforming Material). Control the segregation and proper disposition of material designated by the Material Review Board. Collect data for QA to use in training and performance evaluation of inspection staff. Coach Inbound and/or Outbound inspection teams to recognize errors and areas for improvement. Scrap process as required. Participate in Continuous Improvement Projects (CPAR's). Perform all other duties as assigned. Key skills and competences: Focus on delivering exceptional customer service. A pro-active team worker with warehouse experience ideally in an aerospace related business Ability to be flexible, responsive and enthusiastic. Able to cope well under pressure and resolve issues and problems using their own initiative. Able to work effectively to tight deadlines and targets. Looking for a challenging role in which they can develop personally and professionally. Results driven, taking pride in achieving objectives. Ability to work in a fast-moving environment where a pro-active, can-do attitude is needed to achieve goals. Experience and qualifications: High school diploma or equivalent required. Minimum 2 years of processing aviation surplus parts is required. ISO and/or AS Quality Standard knowledge, a plus. DASI, LLC. and group companies are an Equal Opportunities Employer