Operator jobs at Volt Systems LLC

Iteris is looking for multiple Freeways Operators I to be responsible for the principal monitoring of the freeway management systems (FMS) and must possess strong familiarity with the District's freeway system. The Operators are the highest profile positions in the RTMC, as they are the "eyes and ears" of detection and management of all activities being handled by the RTMC. What you will be doing: Monitor the status of freeways using CCTV cameras, Road Ranger Service Patrols, detector data, etc. to include detecting, confirming, updating, and responding to scheduled and unscheduled traffic and incident management events, congestion, and travel time imbalances in the geographical coverage area Enter all scheduled and unscheduled events and congestion into SunGuide software and disseminate information using ITS devices, websites, and Florida 511 (FL511) system Coordinate with other Control Room staff, law enforcement, and external agencies in response to incidents Dispatch RRSPs to motorists, events, and to assist law enforcement in a timely and efficient manner, and log all activities into SunGuide and ensure the quality of information is complete and concise Manage WWD events Perform daily ITS infrastructure checks (CCTV cameras, DMSs, MVDSs, Video Wall, etc.) during the morning shift, and detect, confirm, and report equipment faults at other times affecting Control Room equipment, RTMC system field equipment, and application issues and open device failure tickets for malfunctions during these checks (performance) Coordinate with maintenance staff as needed Inform Emergency Services of traffic incidents within the RTMC coverage area. These events vary in scope and methods on how the operator responds notifying FHP, RRSP, local first responders, etc. Provide information to FDOT and Iteris TIM Coordinators about locations of recurring and high-profile events to aid in identifying and correcting roadway issues Perform daily Lane Closure Notification System (also known as one.network) checks for work zones within operator assignment areas Follow FDOT District 7 policies and procedures, including the District 7 RTMC SOP Follow time requirements in the District 7 RTMC SOP for event confirmation, RRSP dispatching, DMS message posting, FL511 system update, etc. What you need to be successful in this role: Skills in interpersonal relationships and ability to work well within a group Ability to clearly communicate technical information in layman's terms Ability to work alternate work schedules and be on-call 24 hours/day Ability to gain acceptable skill in the use of SunGuide software and Windows-based applications within the allotted time Ability to write reports clearly and concisely Ability to coordinate real-time activities and priorities Knowledge of communications and sending information via multiple communication devices Iteris anticipates paying an hourly rate between $20.00 and $22.00 for this role. Actual pay offered may be below or above these amounts, depending on the individual's job-related knowledge, skills, and experience. #LI-ONSITE #freewaysoperator

Iteris is seeking a Regional Traffic Management Center [RTMC] Operator to monitor assigned roadways to detect, verify, and manage traffic impacts (e.g., congestion, crashes, roadwork). RTMC Operators are designated as essential personnel and must be able to work in all conditions (e.g., severe weather, pandemic). The position requires a full commitment to the team and to the important mission of providing a safe, efficient, and reliable transportation system. What you will be doing: Work as a member of a team within an operations control room environment Use CCTV to scan roadways and monitor traffic conditions Monitor data feeds to obtain up-to-date traffic-related information Initiate and manage response plans to support traffic incidents Provide traveler information to the public Dispatch field responders to traffic-related incidents Communicate and coordinate with internal and external stakeholders Use computer systems for incident reporting and to control field technology (e.g., traffic cameras, electronic message signs) Use a telephone and two-way radios to dispatch resources and communicate with responders and agencies for coordinated traffic incident management What you need to be successful in this role: High school graduation (or equivalent) Proficient computer use Ability to gain acceptable skills in Windows-based applications within allotted time Ability to successfully complete initial training under the supervision of the Supervisor and TMC Manager Sustained performance as additional knowledge and skills are acquired through “on-the-job” training Ability to coordinate real-time activities and priorities Effective communication in English (written and oral) Scheduling flexibility and dependability (TMC operations are 24x7 and all staff are Essential Personnel) Positive attitude with strong interpersonal skill Excellent attention to detail Punctual and reliable schedule adherence Iteris anticipates paying between $16.00 and $17.00 for this role. However, actual pay offered may vary depending on job related knowledge, skills, and experience. #LI-ONSITE #RTMCoperator

What You Will Do: The Production Operator - Assembly you will build a variety of electronic and electro-mechanical assemblies and components for use in the aerospace industry. The role performs a variety of complex technical tasks, assembly, troubleshooting and audits on electrical assemblies. The individual will assemble component and/or subassemblies in conformance to drawing and quality standards. The individual may exercise independent action and initiative, and may also provide support, and follow direction from Supervisor/Manager, Team Lead, Engineering Aides and Inspection personnel. This position will have direct contact with, Engineering, Quality Assurance, Test Engineering, Calibration, and Supervision. Primary Responsibilities: * Build assemblies as directed by supervisor or team lead in conformance to drawing and quality standards while adhering to documented production time standards if applicable. * Adhere to lot traceability and general inventory practices. * Works from Engineering or Quality drawings, specifications, standards, test procedures, and verbal instructions to determine product or procedure acceptance. * Will be responsible for validating that build and inspection equipment is calibrated and/or qualified as Fit-for-Use. * Understanding of lot traceability and general inventory practices. * Will be responsible to perform self-audits of workstation or as directed to ensure compliance to system and specification requirements. * Takes initiative to define and recommend improvement opportunities * Recognize deviations from standard drawings/practices * Assembly requirements may include: soldering, crimping, wire harnessing, basic testing, visual inspection * May perform inspection of complex assemblies and systems for conformance to drawing and quality standards. * May perform basic troubleshooting of complex assemblies, assembly tools, tooling, and test equipment associated with production product, upgrades, & reworks. * May perform visual, dimensional, electrical, functional, and optical inspections per specified documentation. * May be assigned tasks by supervisor/manager such as Fit-for-Use, Shelf Life and Calibration. * May assist Quality Engineers or Assembly Supervisors with design, inspection, and building of inspection tools and test equipment and/or creation of work standards. * Performs special projects/tasks as assigned Preferred Education * High school diploma or equivalent. Technical degree a plus. Preferred Experience * 5 years' related industry experience required * Knowledge of lighting and test equipment preferred. * Knowledge of and preferably trained in IPC-A-610/-620, J-STD-001 Preferred Specialized Skills and Abilities * Working knowledge of electrical, mechanical, and lighting standards used to measure product performance on the product line. * Strong communication skills * Knowledge of reading, interpreting, and implementing blueprints, schematics and drawings in English * Must have a keen attention to detail; hand and eye coordination * Works cooperatively in a team environment and effectively communicate with others * Participates in problem solving teams to develop process improvements * Willing to work extra hours, and potentially weekends * Must have computer skills and knowledge; ability to perform all computer-related functions as applicable to the designated production areas without direction or supervision. * Has a understanding of Lean principles * May require certifications, example - J-STD-001, IPC-610, IPC-620 Physical Requirements: * Frequent use of personal computers, database and digital platforms, and other office productivity machinery, such as copy machines and computer printers. * Frequently uses hands, fingers, and arms to reach, handle, touch or feel equipment, materials, and computer. * The person in this position needs to frequently move inside the office * Frequent close vision and the ability to adjust focus. * Occasionally use of steps, or ladder. * The employee must occasionally lift and/or move up to 50 pounds. * Seldom to occasionally position self to stoop, kneel, crouch, or crawl. Salary Range Please note the typical hiring range is $25.13 - $34.00 hourly. Job offers within the range are based on significant job qualifications and pay equity.

What You Will Do As a Production Operator - Assembler you will build a variety of electronic and electro-mechanical assemblies and components for use in the aerospace industry. The role performs a variety of complex technical tasks, assembly, troubleshooting and audits on electrical assemblies. The individual will assemble component and/or subassemblies in conformance to drawing and quality standards. The individual may exercise independent action and initiative, and may also provide support, and follow direction from Supervisor/Manager, Team Lead, Engineering Aides and Inspection personnel. This position will have direct contact with, Engineering, Quality Assurance, Test Engineering, Calibration, and Supervision. This assembly position is within our cleanroom which requires specialty precautions in the care of our electronics including protective clothing such as coveralls, masks, hair net gloves, etc. Primary Responsibilities: * Build assemblies as directed by supervisor or team lead in conformance to drawing and quality standards while adhering to documented production time standards if applicable. * Adhere to lot traceability and general inventory practices. * Works from Engineering or Quality drawings, specifications, standards, test procedures, and verbal instructions to determine product or procedure acceptance. * Will be responsible for validating that build and inspection equipment is calibrated and/or qualified as Fit-for-Use. * Understanding of lot traceability and general inventory practices. * Will be responsible to perform self-audits of workstation or as directed to ensure compliance to system and specification requirements. * Takes initiative to define and recommend improvement opportunities * Recognize deviations from standard drawings/practices * Assembly requirements may include: soldering, crimping, wire harnessing, basic testing, visual inspection * May perform inspection of complex assemblies and systems for conformance to drawing and quality standards. * May perform basic troubleshooting of complex assemblies, assembly tools, tooling, and test equipment associated with production product, upgrades, & reworks. * May perform visual, dimensional, electrical, functional, and optical inspections per specified documentation. * May be assigned tasks by supervisor/manager such as Fit-for-Use, Shelf Life and Calibration. * Performs special projects/tasks as assigned Preferred Education: * High school diploma or equivalent. Technical degree a plus. Preferred Experience: * 0-2 years' experience working in electronics production and assembly. * Knowledge of lighting and test equipment preferred. * Knowledge of and preferably trained in IPC-A-610/-620, J-STD-001. * Cleanroom experience. Preferred Specialized Skills and Abilities: * Working knowledge of electrical, mechanical, and lighting standards used to measure product performance on the product line. * Strong communication skills. * Knowledge of reading, interpreting, and implementing blueprints, schematics and drawings in English. * Must have a keen attention to detail; hand and eye coordination. * Works cooperatively in a team environment and effectively communicate with others. * Participates in problem solving teams to develop process improvements. * Willing to work extra hours, and potentially weekends. * Must have computer skills and knowledge; ability to perform all computer-related functions as applicable to the designated production areas without direction or supervision. * Has a understanding of Lean principles. * May require certifications, example - J-STD-001, IPC-610, IPC-620. Physical Requirements * Frequent use of personal computers, database and digital platforms, and other office productivity machinery, such as copy machines and computer printers. * Frequently uses hands, fingers, and arms to reach, handle, touch or feel equipment, materials, and computer. * The person in this position needs to frequently move inside the office * Frequent close vision and the ability to adjust focus. * Occasionally use of steps, or ladder. * The employee must occasionally lift and/or move up to 50 pounds. * Seldom to occasionally position self to stoop, kneel, crouch, or crawl. Work Environment production roles * This position is for Day Shift (6:00am-2:30pm), Monday through Friday. * The ambient noise level is low on day Shift, but hearing protection is provided, upon request. * This job operates in a professional manufacturing environment. Salary Range Please note the typical hiring range is $22.88 - $30.96 hourly. This role is eligible for an additional $2.00 role differential. Job offers within the range are based on significant job qualifications and pay equity.

Company: The Boeing Company Boeing Commercial Airplanes is excited to offer opportunities for a Powered Equipment Operator to join our Fabrication team in Auburn, Algona and Puyallup, Washington. As a Powered Equipment Operator, this position requires a meticulous approach to handling materials and operating equipment. You will ensure that every task is executed with precision and care while maintaining a safe work environment by adhering to established safety protocols and utilizing appropriate protective measures. Your commitment to quality will be vital as you work with various parts and materials, ensuring compliance with stringent specifications and standards. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities Set up, adjust, and operate a variety of heavy-duty power machines, including power saws and hand routers, to bead, flare, flange, burr, upset, form, and expand tube and duct parts according to specifications. Conduct hydrostatic and carbon dioxide chemical leak tests on tube and duct fittings and assemblies, ensuring compliance with quality standards. Skillfully hand-form, straighten, finish, and correct machine-formed parts that may be distorted from heat treatment or machining processes, while working with offsets, compound curvatures, and varying angles. Perform a range of machining operations, including blanking, forming, cutting, trimming, and drilling, while carrying out finishing operations such as buffing, curing, and deburring. Prepare parts and materials by stripping, degreasing, and etching through immersion in designated process tanks, and select appropriate dies and gauges for operations. Inspect parts for usability and compliance with specifications, using checking fixtures and precision measuring instruments to verify accuracy. Manage the receipt, storage, coordination, preparation, and movement of materials and tools within your designated work area, utilizing electronic tracking systems and operating powered elevating equipment as needed. Maintain a clean and safe working environment by cleaning tools, reporting damaged equipment, and setting up safety guards and equipment. Perform limited assembly and subassembly tasks as required, and execute rework and reforming of parts while ensuring all work meets established requirements Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications Computer Experience and Competency Experience using basic math (e.g. addition, subtraction, multiplication and division) Experience operating powered mechanical equipment Ability to lift, push, and pull up to 35 pounds Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. $23.32/hour, with potential to earn up to $47.54/hour in accordance with the terms of the relevant collective bargaining agreement. Summary pay range: $23.32 - $47.54/hour Language Requirements: English Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: Safety Sensitive: Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 4 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

What you will do: As a Production Operator - Assembler you will build a variety of electronic and electro-mechanical assemblies and components for use in the aerospace industry. You will work in a high-volume, fast-paced environment which includes injection molding, masking, painting, touch-up work and inspection. The Assembly Operator II starts by learning our masking and prep processes and, from there, they can develop skills by cross-training into any of the other work center positions such as Mold Setup, Packaging, Inspection or Painter. You may exercise independent action and initiative, and may also provide support, and follow direction from Supervisor/Manager, Team Lead, Engineering Aides and Inspection personnel. This position will have direct contact with, Engineering, Quality Assurance, Test Engineering, Calibration, and Supervision. Primary Responsibilities: * Build assemblies as directed by supervisor or team lead in conformance to drawing and quality standards while adhering to documented production time standards if applicable. * Adhere to lot traceability and general inventory practices. * Works from Engineering or Quality drawings, specifications, standards, test procedures, and verbal instructions to determine product or procedure acceptance. * Will be responsible for validating that build and inspection equipment is calibrated and/or qualified as Fit-for-Use. * Understanding of lot traceability and general inventory practices. * Will be responsible to perform self-audits of workstation or as directed to ensure compliance to system and specification requirements. * Takes initiative to define and recommend improvement opportunities * Recognize deviations from standard drawings/practices * Assembly requirements may include: soldering, crimping, wire harnessing, basic testing, visual inspection * May perform inspection of complex assemblies and systems for conformance to drawing and quality standards. * May perform basic troubleshooting of complex assemblies, assembly tools, tooling, and test equipment associated with production product, upgrades, & reworks. * May perform visual, dimensional, electrical, functional, and optical inspections per specified documentation. * May be assigned tasks by supervisor/manager such as Fit-for-Use, Shelf Life and Calibration. * Performs special projects/tasks as assigned Preferred Education: * High school diploma or equivalent. Technical degree a plus. Preferred Experience: * 0-2 years' experience working in electronics production and assembly. Physical Requirements * Frequent use of personal computers, database and digital platforms, and other office productivity machinery, such as copy machines and computer printers. * Frequently uses hands, fingers, and arms to reach, handle, touch or feel equipment, materials, and computer. * The person in this position needs to frequently move inside the office * Frequent close vision and the ability to adjust focus. * Occasionally use of steps, or ladder. * Sit, stand and walk for 1 - 10 hours per day. * The employee must occasionally lift and/or move up to 50 pounds. * Seldom to occasionally position self to stoop, kneel, crouch, or crawl. Work Environment production roles * This position is for Day Shift (6:00am-2:30pm), Monday through Friday. * The ambient noise level is low on day Shift, but hearing protection is provided, upon request. * This job operates in a professional manufacturing environment. Salary Range Please note the typical hiring range is $23.91 - $28.13 hourly. Job offers within the range are based on significant job qualifications and pay equity.

FORTNA partners with the world's leading brands to transform omnichannel and parcel distribution operations. Known world-wide for enabling companies to keep pace with digital disruption and growth objectives, we design and deliver solutions, powered by intelligent software, to optimize fast, accurate and cost-effective order fulfillment and last mile delivery. Our people, innovative approach and proprietary algorithms and tools ensure optimal operations design and material and information flow. We deliver exceptional value every day to our customers with comprehensive services and products including network strategy, distribution center operational design and implementation, material handling automated equipment, robotics and a comprehensive suite of lifecycle services. At FORTNA, we believe in fostering a workplace that isn't just a job but a movement - a collective effort to redefine success and transform challenges into opportunities. "Join the Movement" encapsulates our commitment to a workplace culture that thrives on collaboration, celebrates diversity, and empowers every individual to contribute to something greater than themselves. Our Team. Our Passion. Our Approach. JOB TITLE: Machine Operator JOB TYPE: Hourly, Non-Exempt REPORTS TO: Fabrication Supervisor SHIFT: 1ST This role starts at $20.00 an hour. JOB SUMMARY: Under general supervision Machine Operators are responsible for the setup, calibration, and operation of fabrication machining equipment including horizontal bandsaws, CNC press brakes and CNC lasers. Machine Operators must be able to work from verbal and written instructions including blueprints, engineering drawings or models. It is the operator's responsibility to inspect machining operations and finished product against specified tolerances using measuring tools including tape measures, square, calipers, etc. If a part is out of tolerance basic troubleshooting and correction is required. It is also the Machine Operators responsibility to perform routine maintenance and cleaning of their equipment. ESSENTIAL FUNCTIONS: The ability to operate a variety of machines in the factory (lasers/press brakes/bandsaws). The ability to interface with other departments to accomplish tasks (Quality/Safety/Engineering). The ability to use appropriate measuring instruments for the task (calipers, tape measures, protractors). The ability to use and operate hand tools. Ability to stand for up to 10 hours per day. The ability to operate a forklift and crane. DESIRED QUALIFICATIONS ONCE IN THE ROLE INCLUDE: Minimum of one-year experience operating a forklift. Basic blueprint reading skills. Basic math skills. Ability to follow verbal and written instructions. Strong interpersonal skills, excellent communication and organizational skills. Demonstrated commitment to safety. Positive attitude with the ability to work independently and in a team environment. REQUIRED SKILL/ QUALIFICATIONS: Must be able to read a tape measure. Must be accountable and results driven. Must be able to lift to 50 lbs. Must pass pre-employment and random drug screen. Attachments This job description describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Employees may be required to perform any other job-related duties as requested by their supervisor. It is the policy of FORTNA and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, FORTNA will provide reasonable accommodations for qualified individuals with disabilities.

**Astronics Advanced Electronic Systems (AES)** is seeking a **Repair Station Test Operator Operator** in **Kirkland, WA** . Weekend Shift hours are Fri - Sun, 5:30am - 6:00pm. Work 36 hours and get paid for 40 hours. If you are interested in working at a dynamic company with a winning culture which has **won awards as one of Washington's Best Places to work for 15 years consecutively** , please read on! **JOB SUMMARY** The Test Operator should have a general mechanical/electrical aptitude, seeking further guidance from trained technicians as required. They will carry out their duties with an emphasis on 5s, safety, and quality. This role will follow set procedures and standard operational guidelines. **ESSENTIAL JOB FUNCTIONS** + Perform set-up and routine go/no-go tests of circuits, and mechanical assemblies + Control operations of equipment or systems such as HASS chambers, HiPot, and ATE's + Set up test devices using hand tools or automatic test methods + Document test results + May maintain logs and records indicating malfunctions + Perform other duties as assigned Per the Code of Federal Regulations (48 CFR § ************ - Drug-free work force), this is a safety sensitive position subject to random drug tests. **MINIMUM QUALIFICATIONS** **Education/Experience:** + High school diploma or GED required. + Demonstrates familiarity (typically 1-2 years of direct experience in the essential functions of the position) **Competencies:** + Comprehension - Understand and apply information conveyed in written and oral methods + Communication - Communicate information and ideas, written and verbal, so others will understand + Problem Sensitivity - Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem and notifying appropriate people. + Customer service - Understand and quickly respond to customer needs + Operation Monitoring - Watching indicators to make sure a machine is working properly + Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance + Test Resource Management - determine the most efficient use of test resources to match or meet production flow requirements + Selective Attention - The ability to concentrate on a task over a period of time without being distracted. + Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes. **Technical Skills:** + Data base user interface software + Microsoft Outlook + Microsoft Windows + Electrical knowledge is a plus **Physical Abilities:** + Manual dexterity + Lifting heavy items (typically 40 lbs.) + Near vision + Color and brightness differentiation - the ability to match or detect differences between colors, including shades of color and brightness **Work Environment:** + Possible exposure to high voltage + Possible exposure to LN2 + Moderate noise environment **EMPLOYMENT ELIGIBILITY REQUIREMENTS** + As a US Department of Defense Contractor, Astronics is bound by International Traffic in Arms Regulations (ITAR). Must be a US Person under ITAR to be eligible. + An offer of employment is contingent on successfully passing a pre-employment background screen and drug test including cannabis. + Per the Code of Federal Regulations (48 CFR § ************ - Drug-free work force), this is a safety sensitive position subject to random drug tests. **Salary is $21.93 - $29.67 per hour.** Several job-related and non-discriminatory factors including but not limited to experience in comparable roles, skill sets, training, education, licensure or certifications, other qualifications, market conditions and business needs influence actual salary offered. **Astronics AES offers a competitive benefits package including:** **Stay Healthy -** Health, dental, vision, disability, life insurance, FSA, HSA, as well as voluntary life/AD&D, voluntary critical illness, accident prevention and hospital indemnity **Save for the Future -** 401K & Employee Stock Purchase Plan **Find Balance -** Employee Assistance Program, Hybrid work arrangements for many positions, work/life balance culture **Time for You -** Generous Paid Time Off, starting at 120 hours annually, plus 12 Paid Holidays per year Position Requirements See above. Full-Time/Part-Time Full-Time About the Organization Astronics Corporation (Nasdaq: ATRO) serves the world's aerospace, defense, and other mission critical industries with proven, innovative technology solutions. Astronics works side-by-side with customers, integrating its array of power, connectivity, lighting, structures, interiors, and test technologies to solve complex challenges. For 50 years, Astronics has delivered creative, customer-focused solutions with exceptional responsiveness. Today, global airframe manufacturers, airlines, military branches, completion centers, and Fortune 500 companies rely on the collaborative spirit and innovation of Astronics. We offer our breadth of technology solutions and services through 11 subsidiary business units and numerous award-winning product brands. Serving our customers is our first priority, and every day we honor this mission with quality, partnership, and energetic global vision. EOE Statement All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. This position is currently accepting applications.

Astronics Advanced Electronic Systems (AES) is seeking a Repair Station Test Operator Operator in Kirkland, WA. Weekend Shift hours are Fri - Sun, 5:30am - 6:00pm. Work 36 hours and get paid for 40 hours. If you are interested in working at a dynamic company with a winning culture which has won awards as one of Washington's Best Places to work for 15 years consecutively, please read on! JOB SUMMARY The Test Operator should have a general mechanical/electrical aptitude, seeking further guidance from trained technicians as required. They will carry out their duties with an emphasis on 5s, safety, and quality. This role will follow set procedures and standard operational guidelines. ESSENTIAL JOB FUNCTIONS * Perform set-up and routine go/no-go tests of circuits, and mechanical assemblies * Control operations of equipment or systems such as HASS chambers, HiPot, and ATE's * Set up test devices using hand tools or automatic test methods * Document test results * May maintain logs and records indicating malfunctions * Perform other duties as assigned Per the Code of Federal Regulations (48 CFR § ************ - Drug-free work force), this is a safety sensitive position subject to random drug tests. MINIMUM QUALIFICATIONS Education/Experience: * High school diploma or GED required. * Demonstrates familiarity (typically 1-2 years of direct experience in the essential functions of the position) Competencies: * Comprehension - Understand and apply information conveyed in written and oral methods * Communication - Communicate information and ideas, written and verbal, so others will understand * Problem Sensitivity - Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem and notifying appropriate people. * Customer service - Understand and quickly respond to customer needs * Operation Monitoring - Watching indicators to make sure a machine is working properly * Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance * Test Resource Management - determine the most efficient use of test resources to match or meet production flow requirements * Selective Attention - The ability to concentrate on a task over a period of time without being distracted. * Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes. Technical Skills: * Data base user interface software * Microsoft Outlook * Microsoft Windows * Electrical knowledge is a plus Physical Abilities: * Manual dexterity * Lifting heavy items (typically 40 lbs.) * Near vision * Color and brightness differentiation - the ability to match or detect differences between colors, including shades of color and brightness Work Environment: * Possible exposure to high voltage * Possible exposure to LN2 * Moderate noise environment EMPLOYMENT ELIGIBILITY REQUIREMENTS * As a US Department of Defense Contractor, Astronics is bound by International Traffic in Arms Regulations (ITAR). Must be a US Person under ITAR to be eligible. * An offer of employment is contingent on successfully passing a pre-employment background screen and drug test including cannabis. * Per the Code of Federal Regulations (48 CFR § ************ - Drug-free work force), this is a safety sensitive position subject to random drug tests. Salary is $21.93 - $29.67 per hour. Several job-related and non-discriminatory factors including but not limited to experience in comparable roles, skill sets, training, education, licensure or certifications, other qualifications, market conditions and business needs influence actual salary offered. Astronics AES offers a competitive benefits package including: Stay Healthy - Health, dental, vision, disability, life insurance, FSA, HSA, as well as voluntary life/AD&D, voluntary critical illness, accident prevention and hospital indemnity Save for the Future - 401K & Employee Stock Purchase Plan Find Balance - Employee Assistance Program, Hybrid work arrangements for many positions, work/life balance culture Time for You - Generous Paid Time Off, starting at 120 hours annually, plus 12 Paid Holidays per year

Job Description it's what's inside that counts _______________________________ There's more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it's the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: Day 1 Benefits Coverage with low cost Medical, Vision, Dental Day 1 Paid-time Off and Vacation 4.5% Company Match 401(k) plan $500 Annual Company-paid Lifestyle Benefit Competitive Compensation and Bonuses Company-paid Life and Disability Insurance Employee Stock Purchase Plan Training and Advancement Opportunities Why This Job Our Fort Myers location is expanding! CMC is always looking to grow the services we can offer to our customers. In Fort Myers, we are adding a production line for Post Tension Cable! Please note that Operators hired for this position will start after May 1st. What You'll Do Attend training regarding applicable equipment Perform additional duties as needed Assist in loading fabricated rebar on trailers and unloading stock material from trailers Maintain the work area and equipment in a clean orderly condition Operate production machines in accordance with established procedures and guidelines Participates in the CMC Safety Programs and proactively upholds the CMC Safety Culture Crosstrain on multiple machines Operate rebar fabrication equipment, such as shears, benders, cranes, forklift, threaders, forging, welders, etc. What You'll Need Must be able to work outside under all weather conditions to include working in the heat and cold weather Able and willing to cross train as required Follow OSHA, EPA, and company safety policies, rules, and regulations Possess a strong work ethic and practice safe working habits Ability to work as a team player in a fast paced environment, with strong work ethic, pay attention to detail and find root causes for issues Ability to operate fabrication machines in a safe manner without supervision Able to work overtime as business requires Must be able to lift 50 pounds, climb ladders and steps, work outside under all weather conditions when needed Must be able to read technical documents and service manuals Possess knowledge of commonly used concepts, practices, and procedures in the industrial field Excellent communication skills, in both written and verbal form are necessary to be successful in this role Minimum 1 year working with heavy industrial environment experience preferred but not required Must be able to work overtime, either planned or unplanned for emergency situations Must possess work ethic and ability to be punctual Stand for long periods of time Your Education High School Diploma, GED, or equivalent experience preferred We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years - and we're just getting started. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC. Apply today and start moving your career - and our world - forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. You should be proficient in: Production Optimization Warehouse Experience Material Handler Experience Packaging Experience Machines & technologies you'll use: Electric Pallet Jack Extrusion Machine Forklifts

Job DescriptionSalary: 19.92 Imaging Processing Operator Kent, WA(On-Site, Full-Time) Schedule:MondayFriday, Day Shift Position Type:Full-Time, On-Site Opens, sorts and performs document prep on incoming mail that is connected to the work performed. Batches the documents and scans them into the system. Performs Quality Assurance on scanned documents Perform general cleaning and maintenance of scanning equipment. Performs other duties as assigned. Data entry services involving the keying of data (on standard work station keyboards) and correcting erroneous data from standard forms and other input document review and resolution of data entry related problems with Area Offices, Regional Offices and the National Office; and other related support functions. Clerical Services usually involving the review, verification, validation and tabulation of data for a variety of functions. Occasional support services typically involving opening, counting, and sorting of incoming mail, filing mail in proper file folders, retrieving/replacing file folders in accordance with DOL prescribed procedures, and various other duties associated with the claims adjudication and payment processes. KNOWLEDGE AND EXPERIENCE REQUIRED: Shall meet the following experience requirements: High school diploma and one year of experience with printing or scanning systems. Completed a PC operator course involving use of a computer terminal screen and keyboard Have specialized knowledge of composition and presentation techniques. Be able to effectively communicate technical information through descriptive texts to the intended audience. Benefits Competitive wages and comprehensive fringe benefits Health and Welfare package, including UHC medical insurance Dental, vision, and life insurancecoverage Paid Time Off (PTO)andholiday pay Direct depositand Wisely Payoptions Generous 401(k)retirement plan LegalShieldandIdentity Theft protectionoptions The Data Entry Company (TDEC)is proud to be an Equal Opportunity Employer. We welcome applications from all qualified individuals, including veterans and persons with disabilities.

it's what's inside that counts _______________________________ There's more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it's the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: * Day 1 Benefits Coverage with low cost Medical, Vision, Dental * Day 1 Paid-time Off and Vacation * 4.5% Company Match 401(k) plan * $500 Annual Company-paid Lifestyle Benefit * Competitive Compensation and Bonuses * Company-paid Life and Disability Insurance * Employee Stock Purchase Plan * Training and Advancement Opportunities Why This Job CMC provides an excellent opportunity to learn the steel, construction reinforcement and ground stabilization industries and to grow in your career. Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and support from your team that you need to excel in your role and reach your full potential. What You'll Do * Assist maintenance personnel when requested/needed * Work safely to prevent on the job injuries by following safety rules and regulations at all times including proper wearing of company PPE * Be alert of unsafe conditions at all times and report them immediately * Effectively communicate with others about possible production issues, concerns, and needs * Ensure equipment inspection reports are filled out each shift * Ensure the tasks and activities as directed by operations support management are carried out in a safe and timely manner * Perform minor/routine maintenance or repairs as needed without the assistance of maintenance personnel * Responsible for continuous improvement such as suggesting improvements in work methods and procedures * Responsible for daily housekeeping duties including but not limited to immediate work area * Troubleshoot work related problems using job knowledge, experience, and by communicating with others * Understand start up, shutdown, and emergency procedures What You'll Need * Ability to work as a team player in a fast-paced environment, with excellent strong work ethic, attention to detail, and organizational skills * Ability to work with exposure to extremes in temperature, chemical, dust fumes and mists, uneven surfaces, loud noise, elevated work areas, and confined spaces * Basic computer skills * Dependability in attendance, work completion, and flexibility to meet business needs * Must be able to learn quickly and multitask * Must be able to lift up to 50 lbs * Some overtime will be required * Work on a rotating shift which may include weekends and holidays Your Education * High School Diploma or GED required We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years - and we're just getting started. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC. Apply today and start moving your career - and our world - forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. Current Employee? Click Here to Apply. Current Employees Apply Click here to apply. Nearest Major Market: Jacksonville

Under general supervision, is responsible for complete knowledge and understanding of litigation support software in customer location i.e. iPro, Law, Doculex, Adobe etc. Ability to operate scanning equipment including Ricoh, Kodak, Canon, Minolta etc. Coordinate, preparation, prioritize, process and quality check, documents for scanning, electronic file conversions, electronic stamping, blowbacks, indexing, load files, specified delivery media etc. Complete all projects per customer's requests within established time frames. Maintenance of all scanning equipment and work-space is necessary. Resolve minor technical problems (when there are paper jams or scanning output is not up to par). May also perform other related duties as required. **Responsibilities** · Coordinate, prepare, process projects for document scanning, electronic conversion, indexing, stamping; Check specifications on the request form for accuracy, quality and time requirements · Upon completion of processing documents/ electronic files quality check production and then output to the client's specified delivery media. i.e. single page/ multipage tiff, OCR, PDF, email, CD, DVD, load files etc · Duplicate and label DVD's, CD's using the labeling format specified by the client within the requested timeframes · Complete blowback requests per client's requirements accurately, efficiently, with in the specified time requirements · Maintain scanner quality (i.e. cleaning lens, reporting mechanical failures). Maintain required levels of quality and rates of production · Log in/out boxes for scanning. Record objective and bibliographic information as appears on documents; Create bar codes for documents. Follow document preparation procedures · Prepare monthly production and volume reports in order to measure productivity and prepare billing charges · Perform other duties as requested by Manager, Assistant Manager and Supervisor **May at some time perform the following:** · Process outgoing mail and packages · Send, receive and deliver faxes · Provide light housekeeping such as making coffee and keeping conference rooms orderly · Handle light maintenance such as replacing light bulbs (if necessary) · Handle reception work including answering phones, taking messages and greeting visitors · Due to changing technology in office automation, will be required to learn new features and functionalities of copying machines, faxes, scanning, shipping equipment as introduced at the client location **Qualifications** + High school Diploma or equivalent + 2-5 years' experience working in a mailroom or professional office environment + Advanced knowledge of metering, weighting, logging and other shipping procedures + Proficient computer skills preferred + Excellent ability to perform routine functions of various equipment and systems (fax, scanner, metering, stamping, tracking systems, photocopying, color copying, etc.) + General supervision and instructions given for routine work and detailed instructions given for new activities + Excellent customer service, professional attitude and appearance are a must. Ability to work overtime & meet deadlines **PHYSICAL DEMANDS** Intermittent physical activity including bending, reaching and prolonged periods of sitting or standing May lift and/or move up to 50 lbs **What We Offer:** Competitive pay & benefits! Comprehensive training and development programs that prepare employees to advance from within A company focused on creating a positive work and client environment Employee discounts on entertainment, products, and services nationwide! **_Come Join Our Team!_** **Job Locations** _US-WA-Lacey_ **Posted Date** _1 week ago_ _(12/4/2025 5:37 PM)_ **_Requisition ID_** _2025-20493_ **_\# of Openings_** _1_ **_Category (Portal Searching)_** _Administrative/Clerical_ **_Position Type (Portal Searching)_** _Temporary Full-Time_ **_Minimum Salary_** _USD $21.15/Hr._ **_Maximum Salary_** _USD $33.00/Hr._ **_Fixed Salary_** _USD $21.15/Hr._ Canon is proud to be an equal opportunity/affirmative action employer. Minority/Female/Individuals with Disabilities/Veteran. We value the diversity of our workforce and knowledge of our people. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identification, national origin, disability, genetic information or protected veteran status, or any other characteristic protected by law. Click on the following links to learn more "EEO is the Law" poster, "EEO is the Law" poster supplement, NLRA "Employee Rights" poster and Canon's Pay Transparency Statement. Canon is committed to providing reasonable accommodations to qualified individuals with disabilities. If you require a reasonable accommodation in order to complete an employment application, or during the application process, please e-mail us at accommodationrequest@cusa.canon.com.

As part of our BAE Systems Jacksonville Maritime Solutions (JMS) team, you will be working alongside some of the industry's top talent on the forefront of technology. We are currently hiring for an experienced operator to support heavy lifting and transport projects using Self-Propelled Modular Transporters (SPMTs). The SPMT Operator will be a key member of the JMS team and responsible for the execution of onsite operations and minor maintenance using SPMTs and rigging equipment. Minimal to no travel will be required. Working as part of the SPMT team, you will be responsible for the full life cycle within a project, such as working to industry standards, following detailed RAMS (Risk Assessment and Method Statement) and engineering drawings, mobilization/demobilization of equipment and operating the SPMTs. As a SPMT Operator, you will be responsible for: Operating SPMT's in a safe and efficient manner. Evaluate loads requiring movement on SPMT equipment and determine risk categorization. Ensuring that all equipment is maintained and in good working order. Inspecting SPMT's before and after each use to ensure safety and compliance with regulations. Loading and unloading cargo in a precise and controlled manner; understanding and demonstrating proper load securement for transport. Communicating effectively with project managers, crew members, and clients. Following all safety protocols and procedures. Completing daily reports and maintenance logs. Loading, unloading, assembling and disassembling assigned SPMTs and auxiliary equipment. Operating equipment to the relevant standards and instructions. Moving loads in line with project requirements. Performing other related duties as required. 2 plus years' experience operating SPMTs. Both on-site operations (to include performing basic maintenance, inspections etc.) and pre-operation planning, providing advice, guidance, and when required supporting Project Managers or Project Engineers in the engineering and planning stages of projects. Must be able to read, understand and follow engineered drawings. Ensuring work is carried out safely and effectively. A valid driver's license. Basic understanding of maintenance and repair work. Experienced in adjusting trailers to ensure equal load is spread throughout all axels and can adjust to suit the terrain. Strong understanding of safety protocols and regulations. Experience troubleshooting fluid and mechanical systems. Understanding of basic rigging and securing best practices. Excellent communication and teamwork skills. Must be reliable, able to work independently and make decisions under pressure. Strong attention to detail, precision and teamwork skills. Ability to work in a variety of weather conditions. Evaluate loads requiring movement on SPMT equipment and determine risk categorization per BAE standards. Work with Heavy Lift Engineer to plan and execute loading/transport operation. Must be able to read and understand transportation drawings for setup of SPMT equipment. Understand and demonstrate proper load securement for transport. Evaluate transportation routing requirements for adequate clearances and soil conditions. Setup staging equipment for items to be self-offloaded. Clean, maintain and inspect equipment for defective components and notify supervisor of any defects or malfunctions. Perform assembly, disassemble and reconfiguration of SPMT equipment. Understand and demonstrate working knowledge of hydraulic suspension, coordinates and valve/sensor assignment in accordance with engineered transport plans. Assist crane and rigging crews with all tasks for site heavy equipment lifts and movements. About BAE Systems Platforms & Services Posting BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and ship repair…just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too. 5+ years' experience operating SPMTs on various types of projects, or similar heavy transporters. Both on-site operations (to include performing basic maintenance, inspections etc.) and pre-operation planning, providing advice, guidance, and when required supporting Project Managers or Project Engineers in the engineering and planning stages of projects. Benefits Information Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. Intern Benefits: Temporary employees generally are not eligible for BAE Systems benefits, but can elect to participate in the 401(k) savings plan. Temporary employees working 20+ hours per week are eligible for medical benefits, the employee assistance program, and business travel accident insurance. Please note: Some benefits may be different for union employees that are governed by a collective bargaining agreement (CBA) or for positions covered by a wage law called the McNamara-O'Hara Service Contract Act (SCA).

Job Title: Dev Ops Duration: Contarct/ Full time Job Description: • Having at least 3-5 experience of development experience using any Agile management practices • Working experience in Visual Studio online services / TFS. • Excellent client-facing and internal communication skills • Excellent written and verbal communication skills • Good troubleshooting and problem solving skills. • Drive platform improvements by analyzing the frequent/repeated issues and coordinating with different product teams Additional Information Independent Candidate Only Full Time Opportunity

Ajith KRG Technologies, Inc., ******************** 25000 Avenue Stanford, Suite #243, Valencia, CA 91355 Direct : ************ Ext : 310 Job Title: Dev ops Location: Redmond, WA Duration: Full Time Job Description: 1. Development skills required using .Net , C# , PowerShell and other Microsoft technologies. 2. On-boarding new Services and maintaining the Services. 3. Deployment of various components. 4. Handling Livesite , Shift Rotations , Production and Pre-Production issue. 5. Responsible for End-to-End Incident Management . 6. Developing new tools for monitoring services & automating manual tasks 7. Authoring troubleshooting guides and process documentation. 8. Excellent communication skills Additional Information All your information will be kept confidential according to EEO guidelines.

Warehouse Associate - Equipment Operator - Full Time Role We value your commitment, especially during our busiest time of year! Starting Base Rate: $18.00 per hour ($19.50 for all hours worked after 6pm) and additional equipment operator pay of $2.50 Peak Performance Bonus: Earn an extra $800 bonus for successfully completing the peak season Oct 19-Dec 13. Bonus eligibility requires successful attendance and performance throughout the defined peak period. Shifts: Shift availability may change (overtime may be required) Mon-Fri 10am-6:30pm Sun-Tues 5am-5:30pm Sun- Tues 4:45pm-5:15am Wed-Sat 6am-4:30pm * Benefits to building a HOME for your career with Wayfair: * Medical benefits eligibility from Day 1 * Referral bonuses * Overtime hours & pay * 401(k) * Wayfair company discount * Growth opportunities (Conversions, Promotions, and more!) * Dozens of discounts and perks with partners! We are Wayfair; we deliver a best-in-class customer experience in the furniture and home space because of people like you, who are driven, determined, collaborative, and thrive in a fast-paced environment. In order to maintain our high level of delivery standards and meet our customer's needs, the Wayfair Distribution team plays a key role in improving customer satisfaction and driving repeat business. We've been busy building a best-in-class logistics network that allows us to delight customers by speeding up deliveries, adding services, and reducing damage using our own physical, asset-based warehouses. We are looking for talented hard-working individuals to join our growing team - your professional home awaits you at Wayfair! What You'll Do * Unload and receive inbound furniture orders which will require manually moving large, heavy goods. * Must be comfortable repeatedly lifting up to 75 pounds unassisted and maneuvering product 150+ pounds unassisted or via team lift. * Use scan technology to document pertinent carton level information, including condition, quantity, and warehouse location of material. * Proactively monitor order management systems to ensure that all orders have been received properly and that detailed descriptions are provided for any Overage/Shortage/Damage issues. * Perform regular cycle counts to ensure inventory is accurate and up to date. * Pick deliveries from inventory and stage them by truck and stop number. * Provide direct input into the existing user tools and make recommendations for improvements based on your everyday experience. * Be a vocal contributor on the team. * Work effectively with peers and managers. * Identify the most efficient way to complete assigned tasks and asks clarifying questions when appropriate. * Able to read and comprehend English to ensure your safety and the safety of those working around you. Perform additional responsibilities as assigned. What You'll Need * Minimum of 6 months of experience operating a Cherry Picker/ Order Picker * Must be comfortable repeatedly lifting up to 75 lbs. unassisted and moving product 150+ lbs. unassisted or via team lift. * Must be able to work on the warehouse floor 8 hours a day or more. * Strong, consistent work ethic. * Comfort with scanning technology. * Experience in Distribution or Logistics is a plus. * Experience working in High Jump is a plus. Able to read and comprehend English to ensure your safety and the safety of those working around you. Assistance for Individuals with Disabilities Wayfair is fully committed to providing equal opportunities for all individuals, including individuals with disabilities. As part of this commitment, Wayfair will make reasonable accommodations to the known physical or mental limitations of qualified individuals with disabilities, unless doing so would impose an undue hardship on business operations. If you require a reasonable accommodation to participate in the job application or interview process, please let us know by completing our Accomodations for Applicants form. Need Technical Assistance? For more information about applying for a career at wayfair, visit our FAQ page here. About Wayfair Inc. Wayfair is one of the world's largest online destinations for the home. Whether you work in our global headquarters in Boston, or in our warehouses or offices throughout the world, we're reinventing the way people shop for their homes. Through our commitment to industry-leading technology and creative problem-solving, we are confident that Wayfair will be home to the most rewarding work of your career. If you're looking for rapid growth, constant learning, and dynamic challenges, then you'll find that amazing career opportunities are knocking. No matter who you are, Wayfair is a place you can call home. We're a community of innovators, risk-takers, and trailblazers who celebrate our differences, and know that our unique perspectives make us stronger, smarter, and well-positioned for success. We value and rely on the collective voices of our employees, customers, community, and suppliers to help guide us as we build a better Wayfair - and world - for all. Every voice, every perspective matters. That's why we're proud to be an equal opportunity employer. We do not discriminate on the basis of race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, genetic information, or any other legally protected characteristic. Your personal data is processed in accordance with our Candidate Privacy Notice (***************************************** If you have any questions or wish to exercise your rights under applicable privacy and data protection laws, please contact us at *********************************.

$54.55 IS OPEN TO AFOGNAK SHAREHOLDERS AND LOCAL UNION 612 MEMBERS ONLY. The Heavy Equipment Operator is responsible for operating heavy equipment in a safe and appropriate manner. Heavy equipment may include, but not limited to, trucks, front-end loaders, bulldozers, graders, extended boom equipment, tamping equipment, back hoe, compactors,. The Heavy Equipment Operator must also clean, maintain and secure all equipment as directed by legislation, policies and procedures. This position an on call or per job task order basis. Primary Duties and Responsibilities: * Tasks to be performed may include but are not limited to: * Operate heavy equipment in a safe and effective manner in order to minimize the risk of Injury, property damage or loss of life. * Perform daily safety and maintenance checks. * Clean heavy equipment as scheduled and/or required. * Ensure heavy equipment is safely and securely stored. * Participate in routine maintenance. . * Maintain a clean and presentable workplace/station. * Accomplishes all tasks using best safety practices as adopted by EM385 REQUIRED QUALIFICATIONS AND EXPERIENCE: Required Qualifications and Experience: * Must have a minimum of 5 years' experience on civil projects. * CDL with tanker endorsement, preferred * No phone calls please Afognak Native Corporation and Afognak's direct and indirect subsidiaries, partnerships, joint ventures and affiliates to include Alutiiq, LLC; Afognak Commercial Group, LLC; Alutiiq Professional Consulting, LLC; and each of their respective domestic and foreign, direct and indirect subsidiaries, partnerships, joint ventures and affiliates are equal opportunity employers that do not discriminate on the basis of actual or perceived race, color, religion, national origin, citizenship status, age, sex (including pregnancy, childbirth, related medical conditions and lactation), sexual orientation, protected veteran status, disability, genetic information, or any other characteristic protected by applicable federal, state or local laws (collectively, "Protected Status"). The pay range information provided is a general guideline. The pay rate offered will be determined based on the candidate's experience and qualifications, as well as geographic locations, market data, and other business considerations, as permitted by law. Our full range of benefits include medical, dental, vision, disability protection, life insurance, prescription coverage, voluntary benefits, paid leave, and 401(k) retirement. Positions covered by the McNamara O'Hara Service Contract Act (SCA), Davis-Bacon Act (DBA), or a Collective Bargaining Agreement (CBA), or Fair Labor Standards Act (FLSA) will comply with the statute or CBA requirements as well as other client-customer contract requirements (all benefits are subject to eligibility requirements). For more information, please visit our Company's Career page.

Stability | Competitive Weekly Pay + Benefits | Growth Opportunities Why join THIS team? Guaranteed weekly pay Company truck, gas card, phone, tablet, and uniform Medical, Prescription, Dental, Vision, Group Life, HSA, Matching 401k benefits Employee Relief Fund On-going training & development, growth opportunities Education and Tuition Assistance Paid Holidays Flexible Schedule Paid Vacation after 90 Days Parental Leave Birthday Pay What you will do: Representation of the company in a professional manner upon arrival Run Electrical and Gas conduits Operate mini excavator, skid steer or similar. Maintain a clean & organized job site, with a well inventoried truck Driving company truck with a trailer & equipment What YOU will bring: Clean, safe driving record CDL classification preferred but not required Strong verbal and written communications Strong desire to be a better technician tomorrow than you are today OSHA 30 3 years minimum in gas /electrical/underground equipment operator.