Production Associate jobs at Volt Systems LLC

Job Description We provide chefs with expertly ground or cut and portion beef, pork, veal, lamb and other proteins on rigid meat-selection criteria, precise aging and expert trimming. The Production Associate will prepare high quality cuts of meats or grinds according to customer specifications using company standards and adhering to all safety requirements. Essential Functions & Responsibilities: Assist in setting up equipment and tear down. Place products in packaging machine to be sealed correctly. Weigh and package cut proteins or grinds. Maintain safe, organized and clean facility by complying with procedures, rules, and regulations in accordance with company policy and as outlined by USDA and OSHA Actively participates in ensuring the safety and protection of our products against damage, deterioration and contamination. Complies with GMP's, HACCP, SOP's and Food Safety regulations and policies. Ability to effectively communicate with leaders and co-workers. Safely operate machinery such as conveyors, packaging equipment, labeling and taping machines Follow established equipment Lockout/Tagout procedures as required. Consistent attendance with on time arrival. Other duties as assigned. Food & Physical Safety Perform duties to SQF (Safe Quality Food) level 2 standards and requirements. Follow Good Manufacturing Practices (GMPs), policies and procedures. Understand and complete your responsibilities under Hazard Analysis and Critical Control Point (HACCP) Wear the required personal protective equipment (PPE) as required by the position and/or task. Report any accidents, incidents, near misses immediately. Maintain a clean and organized work area. Work within established safe work practices, policies, and procedures. Work Environment/Physical Demands Associate will spend up to 100% of their time in refrigerated/frozen environment 35°ree;F- 45°ree;F. Associate must have the ability to constantly work on concrete floors in a cold, moist, and refrigerated environment. Associate must have the ability to safely use sharp tools such as knives and meat saws and constantly perform repetitive motion tasks. Associate must have the ability to lift-up to 75 pounds frequently and frequently bend, kneel and lift. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit or stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Occasionally, the employee will be required to perform work in a refrigerated environment. Teamwork & Communication: Listens well. Speaks effectively. Writes clearly. Participates in, accepts, and supports group decisions. Acknowledges the ideas and contribution of others. Works well with varying personalities and cultures. Contributes to a positive work environment. Planning & Organizing: Self-starter. Structured and productive in work habits. Manages time well and meets deadlines. Works with a sense of urgency. Sees things through to completion. Demonstrates flexibility in responding to unexpected demands. Problem-solving & Decision-making: Ability to break down a situation into smaller pieces to identify key issues. Makes good decisions independently. Balances short- and long-term considerations. Able to cope with setbacks and unexpected challenges with energy. Proposes ideas or actions that improve work effectiveness. Finds fresh solutions to issues.

What You Will Do: The Production Operator - Assembly you will build a variety of electronic and electro-mechanical assemblies and components for use in the aerospace industry. The role performs a variety of complex technical tasks, assembly, troubleshooting and audits on electrical assemblies. The individual will assemble component and/or subassemblies in conformance to drawing and quality standards. The individual may exercise independent action and initiative, and may also provide support, and follow direction from Supervisor/Manager, Team Lead, Engineering Aides and Inspection personnel. This position will have direct contact with, Engineering, Quality Assurance, Test Engineering, Calibration, and Supervision. Primary Responsibilities: * Build assemblies as directed by supervisor or team lead in conformance to drawing and quality standards while adhering to documented production time standards if applicable. * Adhere to lot traceability and general inventory practices. * Works from Engineering or Quality drawings, specifications, standards, test procedures, and verbal instructions to determine product or procedure acceptance. * Will be responsible for validating that build and inspection equipment is calibrated and/or qualified as Fit-for-Use. * Understanding of lot traceability and general inventory practices. * Will be responsible to perform self-audits of workstation or as directed to ensure compliance to system and specification requirements. * Takes initiative to define and recommend improvement opportunities * Recognize deviations from standard drawings/practices * Assembly requirements may include: soldering, crimping, wire harnessing, basic testing, visual inspection * May perform inspection of complex assemblies and systems for conformance to drawing and quality standards. * May perform basic troubleshooting of complex assemblies, assembly tools, tooling, and test equipment associated with production product, upgrades, & reworks. * May perform visual, dimensional, electrical, functional, and optical inspections per specified documentation. * May be assigned tasks by supervisor/manager such as Fit-for-Use, Shelf Life and Calibration. * May assist Quality Engineers or Assembly Supervisors with design, inspection, and building of inspection tools and test equipment and/or creation of work standards. * Performs special projects/tasks as assigned Preferred Education * High school diploma or equivalent. Technical degree a plus. Preferred Experience * 5 years' related industry experience required * Knowledge of lighting and test equipment preferred. * Knowledge of and preferably trained in IPC-A-610/-620, J-STD-001 Preferred Specialized Skills and Abilities * Working knowledge of electrical, mechanical, and lighting standards used to measure product performance on the product line. * Strong communication skills * Knowledge of reading, interpreting, and implementing blueprints, schematics and drawings in English * Must have a keen attention to detail; hand and eye coordination * Works cooperatively in a team environment and effectively communicate with others * Participates in problem solving teams to develop process improvements * Willing to work extra hours, and potentially weekends * Must have computer skills and knowledge; ability to perform all computer-related functions as applicable to the designated production areas without direction or supervision. * Has a understanding of Lean principles * May require certifications, example - J-STD-001, IPC-610, IPC-620 Physical Requirements: * Frequent use of personal computers, database and digital platforms, and other office productivity machinery, such as copy machines and computer printers. * Frequently uses hands, fingers, and arms to reach, handle, touch or feel equipment, materials, and computer. * The person in this position needs to frequently move inside the office * Frequent close vision and the ability to adjust focus. * Occasionally use of steps, or ladder. * The employee must occasionally lift and/or move up to 50 pounds. * Seldom to occasionally position self to stoop, kneel, crouch, or crawl. Salary Range Please note the typical hiring range is $25.13 - $34.00 hourly. Job offers within the range are based on significant job qualifications and pay equity.

What You Will Do As a Production Operator - Assembler you will build a variety of electronic and electro-mechanical assemblies and components for use in the aerospace industry. The role performs a variety of complex technical tasks, assembly, troubleshooting and audits on electrical assemblies. The individual will assemble component and/or subassemblies in conformance to drawing and quality standards. The individual may exercise independent action and initiative, and may also provide support, and follow direction from Supervisor/Manager, Team Lead, Engineering Aides and Inspection personnel. This position will have direct contact with, Engineering, Quality Assurance, Test Engineering, Calibration, and Supervision. This assembly position is within our cleanroom which requires specialty precautions in the care of our electronics including protective clothing such as coveralls, masks, hair net gloves, etc. Primary Responsibilities: * Build assemblies as directed by supervisor or team lead in conformance to drawing and quality standards while adhering to documented production time standards if applicable. * Adhere to lot traceability and general inventory practices. * Works from Engineering or Quality drawings, specifications, standards, test procedures, and verbal instructions to determine product or procedure acceptance. * Will be responsible for validating that build and inspection equipment is calibrated and/or qualified as Fit-for-Use. * Understanding of lot traceability and general inventory practices. * Will be responsible to perform self-audits of workstation or as directed to ensure compliance to system and specification requirements. * Takes initiative to define and recommend improvement opportunities * Recognize deviations from standard drawings/practices * Assembly requirements may include: soldering, crimping, wire harnessing, basic testing, visual inspection * May perform inspection of complex assemblies and systems for conformance to drawing and quality standards. * May perform basic troubleshooting of complex assemblies, assembly tools, tooling, and test equipment associated with production product, upgrades, & reworks. * May perform visual, dimensional, electrical, functional, and optical inspections per specified documentation. * May be assigned tasks by supervisor/manager such as Fit-for-Use, Shelf Life and Calibration. * Performs special projects/tasks as assigned Preferred Education: * High school diploma or equivalent. Technical degree a plus. Preferred Experience: * 0-2 years' experience working in electronics production and assembly. * Knowledge of lighting and test equipment preferred. * Knowledge of and preferably trained in IPC-A-610/-620, J-STD-001. * Cleanroom experience. Preferred Specialized Skills and Abilities: * Working knowledge of electrical, mechanical, and lighting standards used to measure product performance on the product line. * Strong communication skills. * Knowledge of reading, interpreting, and implementing blueprints, schematics and drawings in English. * Must have a keen attention to detail; hand and eye coordination. * Works cooperatively in a team environment and effectively communicate with others. * Participates in problem solving teams to develop process improvements. * Willing to work extra hours, and potentially weekends. * Must have computer skills and knowledge; ability to perform all computer-related functions as applicable to the designated production areas without direction or supervision. * Has a understanding of Lean principles. * May require certifications, example - J-STD-001, IPC-610, IPC-620. Physical Requirements * Frequent use of personal computers, database and digital platforms, and other office productivity machinery, such as copy machines and computer printers. * Frequently uses hands, fingers, and arms to reach, handle, touch or feel equipment, materials, and computer. * The person in this position needs to frequently move inside the office * Frequent close vision and the ability to adjust focus. * Occasionally use of steps, or ladder. * The employee must occasionally lift and/or move up to 50 pounds. * Seldom to occasionally position self to stoop, kneel, crouch, or crawl. Work Environment production roles * This position is for Day Shift (6:00am-2:30pm), Monday through Friday. * The ambient noise level is low on day Shift, but hearing protection is provided, upon request. * This job operates in a professional manufacturing environment. Salary Range Please note the typical hiring range is $22.88 - $30.96 hourly. This role is eligible for an additional $2.00 role differential. Job offers within the range are based on significant job qualifications and pay equity.

What you will do: As a Production Operator - Assembler you will build a variety of electronic and electro-mechanical assemblies and components for use in the aerospace industry. You will work in a high-volume, fast-paced environment which includes injection molding, masking, painting, touch-up work and inspection. The Assembly Operator II starts by learning our masking and prep processes and, from there, they can develop skills by cross-training into any of the other work center positions such as Mold Setup, Packaging, Inspection or Painter. You may exercise independent action and initiative, and may also provide support, and follow direction from Supervisor/Manager, Team Lead, Engineering Aides and Inspection personnel. This position will have direct contact with, Engineering, Quality Assurance, Test Engineering, Calibration, and Supervision. Primary Responsibilities: * Build assemblies as directed by supervisor or team lead in conformance to drawing and quality standards while adhering to documented production time standards if applicable. * Adhere to lot traceability and general inventory practices. * Works from Engineering or Quality drawings, specifications, standards, test procedures, and verbal instructions to determine product or procedure acceptance. * Will be responsible for validating that build and inspection equipment is calibrated and/or qualified as Fit-for-Use. * Understanding of lot traceability and general inventory practices. * Will be responsible to perform self-audits of workstation or as directed to ensure compliance to system and specification requirements. * Takes initiative to define and recommend improvement opportunities * Recognize deviations from standard drawings/practices * Assembly requirements may include: soldering, crimping, wire harnessing, basic testing, visual inspection * May perform inspection of complex assemblies and systems for conformance to drawing and quality standards. * May perform basic troubleshooting of complex assemblies, assembly tools, tooling, and test equipment associated with production product, upgrades, & reworks. * May perform visual, dimensional, electrical, functional, and optical inspections per specified documentation. * May be assigned tasks by supervisor/manager such as Fit-for-Use, Shelf Life and Calibration. * Performs special projects/tasks as assigned Preferred Education: * High school diploma or equivalent. Technical degree a plus. Preferred Experience: * 0-2 years' experience working in electronics production and assembly. Physical Requirements * Frequent use of personal computers, database and digital platforms, and other office productivity machinery, such as copy machines and computer printers. * Frequently uses hands, fingers, and arms to reach, handle, touch or feel equipment, materials, and computer. * The person in this position needs to frequently move inside the office * Frequent close vision and the ability to adjust focus. * Occasionally use of steps, or ladder. * Sit, stand and walk for 1 - 10 hours per day. * The employee must occasionally lift and/or move up to 50 pounds. * Seldom to occasionally position self to stoop, kneel, crouch, or crawl. Work Environment production roles * This position is for Day Shift (6:00am-2:30pm), Monday through Friday. * The ambient noise level is low on day Shift, but hearing protection is provided, upon request. * This job operates in a professional manufacturing environment. Salary Range Please note the typical hiring range is $23.91 - $28.13 hourly. Job offers within the range are based on significant job qualifications and pay equity.

Details Job Title: Production Tech Department: Operations Reports to: Production Supervisor FLSA Status: Full-Time, Non-Exempt Our mission is to share a sense of adventure with the world through our high performance marine products while instilling and inspiring consumer confidence with superior service. Benefits 100% employer paid - Employee/family health plan option available Health Savings Account (HSA) - with generous employer matching program Dental, Vision, Voluntary Life Insurance 100% employer paid - Employee Life Insurance, Short Term and Long-Term Disability Insurance Accident, Hospital and Critical Illness 401K with generous employer matching program Paid time off Holiday pay Annual employee apparel spending allowance Employee Referral Program Summary The Production Tech tends one or more machine tools, special purpose machines, or works to specifications on production basis for assembling an entire product or components of a product to produce the highest quality product for the end user. Company Values: Exceptional Client Service - Our customers are our life blood, we treat them as the essential partners that they are by going the extra mile and putting customer needs first Innovation and Growth - Always looking to acquire new information and try new things to improve how we work Ethical Orientation - Earns the trust and confidence of coworkers and customers through honest communication, ethical behavior and professionalism in all interactions Driven & Passionate - Shows passion for improving the delivery of services with a commitment to continuous improvement Duties and Responsibilities Lifts work piece manually onto pallets or workstation for assembly. Perform quality checks on products and parts Inspects and measures machined work pieces to verify conformance to specifications. Count and assemble kits for other components. Wrap and box components. Cleans machined parts. i.e. drill table, drill press. Tends machines and equipment other than machine tools. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice Requirements: Machine and Tools Used Ability to use and understand air tools Ability to use sockets and wrenches Box Taping Machine Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Problem Solving Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Working Hours: Hours will be 7:00 AM to 4:00 PM Monday through Friday Working Conditions/Physical Demands of the Job: Warehouse/Production: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. The temperature in the warehouse is moderate to hot depending on the time of the year. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Requirements Machine and Tools Used Ability to use and understand air tools Ability to use sockets and wrenches Box Taping Machine Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Problem Solving Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Working Hours: Hours will be 7:00 AM to 4:00 PM Monday through Friday Working Conditions/Physical Demands of the Job: Warehouse/Production: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. The temperature in the warehouse is moderate to hot depending on the time of the year. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: The Warehouse Tech is responsible for the pulling of product on a day-to-day basis. Responsible for the loading and unloading of product to and from vendors/delivery trucks. Maintain a clean and organized work area, with keeping aisles clear and labeled. Responsible for product knowledge and internal codes used to distinguish between items. Able to work as a team to get each job completed in a timely manner to ensure it gets into the production team when they require it for the next build. Requirements: Warehouse Tech Essential Functions: • Responsible for having a higher level of product knowledge • Accountable for quality control on all parts before being brought to production • Ensures all counts on parts received from a vendor, or on work orders match the quantities specified • Places all product for a specific build in the prep area • Inspect raw materials used in the production of JL Marine products • Organize the warehouse by labeling and consolidating pallets, and ensure all like parts are stored together • Maintain a clean and clear work area • Maintain inventory counts when called upon • Clear out/set-up production area to ensure parts are taken out and counted, and new product is pulled in for them to begin the next build required Educational/Experience Requirement: • Less than high school education; or up to one month related experience or training; equivalent combination. • High school diploma or GED; or 1-3 months related experience and/or training; equivalent combination, preferred Machine and Tools to be Used • Forklift • Pallet Jack Knowledge, Skills and Abilities (KSAs): • Critical Thinking-Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. • Active Listening-Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. • Monitoring-Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. • Coordination-Adjusting actions in relation to others' actions. • Active Learning-Understanding the implications of new information for both current and future problem-solving and decision-making. • Social Perceptiveness-Being aware of others' reactions and understanding why they react as they do. • Service Orientation-Actively looking for ways to help people. • Learning Strategies-Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. • Time Management-Managing one's own time and the time of others. • Operation and Control-Controlling operations of equipment or systems. • Quality Control Analysis-Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Problem Solving Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills: Basic personal computer skills Working Hours: 7:00 AM to 4:00 PM Monday through Friday, with a 1 hour lunch. Working Conditions/Physical Demands of the Job: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Company: The Boeing Company Boeing is seeking an experienced Supplier Quality Production Specialist (Investigation) to support the Boeing Global Services (BGS) supplier quality QAI team located in SeaTac, WA. The investigator will support our BGS Commercial airplane programs by performing a collective analysis of nonconformance records, In-Service Investigations, Notice of Escapement (NOE), and others to identify systemic issues and opportunities to obtain corrective action from our global suppliers. In this role, one will be expected to collaborate and communicate with internal and external stakeholders, suppliers, sr. leaders, executives, and airline customers. Track and respond to supplier communication. Support program integration, customer, and leadership meetings. Report out to leadership. Work well and maintain composure under high-stress and complex projects. Demonstrates a proactive, can-do attitude. Willing to go above and beyond to ensure team success. Flexible and eager to take on wide-ranging responsibilities. Committed to contributing positively to all aspects of the team. This is a fast-paced, flexible role. We are looking for someone wanting to grow and be heard. We want someone willing to assist their teammates when needed and adjust to the ever-changing priorities of our statement of work. We support many teams to ensure the production system runs and our environment is ever-changing. If any of this relates to you, please apply! We are committed to providing our team with equal growth opportunities in a stable work environment. We encourage every teammate to feel empowered to bring their best through creativity, innovation, and diversity, as this drives a positive culture through transparency, safety, quality, and respect. Above all, employees will be provided the opportunity to seek, speak, and listen within the organization. They are encouraged to share externally with each Boeing customer to build balanced work relationships. Our team prioritizes work/life balance. We support each other to ensure the work is accomplished. Position Responsibilities: Reviews and validates product non-conformances and disposition type, quality procedures and engineering requirements. Performs analysis to identify and evaluate the quality of products, operations and processes to Quality Management System requirements, applicable company procedures, contract requirements or government regulations. Applies knowledge of aerospace design, systems, and integration to perform failure and forensic analysis of aerospace components and systems. Trains and mentors' fellow employees in the Quality Management System. Performs root cause analysis on the nonconformance to identify the cause and prevent reoccurrence. Independently develops, modifies, and documents actions to assure problem resolution or to implement corrective/preventive action and documents resolution. Obtains corrective action on nonconforming plans and hardware/processes. Negotiates concurrence, obtains commitments for taking preventive and corrective action, prioritizes quality activities and ensures problem resolution. Reviews and validates the corrective action plans and identifies effectivity to ensure completion. Reviews and approves Quality planning changes or disposition of nonconformance hardware products/processes. Guides validation of configuration management, quality procedures and material review policies to deliver the software products. Develops software system processes to support changing industry standards. Reviews and implements corrective action on audit results to ensure media is stored and handled per engineering defined requirements. Interprets industry standards and provide recommendations for implementation. Creates analytical reports and coordinates with the responsible parties for internal/external distribution. Works under general direction. Basic Qualifications (Required Skills/Experience): 1+ years' experience with conducting quality investigations, Root Cause analysis and implementation and verification of Corrective Actions in production environments Preferred Qualifications (Desired Skills/Experience): 1+ years' of experience working with Notice of Escapements (NoE) 1+ years' of experience working with the Supplier Quality Information System (SQIS) as part of a statement of work 1+ years' of working with Suppliers 1+ years' experience working with Common Manufacturing Execution System (CMES) 1+ years' experience working with SAP Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Level 2 - $75,650 - $102,350/Annually Level 3 - $91,800 - $124,200/Annually Language Requirements: Not Applicable Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This is not an Export Control position. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Job Description it's what's inside that counts _______________________________ There's more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it's the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: Day 1 Benefits Coverage with low cost Medical, Vision, Dental Day 1 Paid-time Off and Vacation 4.5% Company Match 401(k) plan $500 Annual Company-paid Lifestyle Benefit Competitive Compensation and Bonuses Company-paid Life and Disability Insurance Employee Stock Purchase Plan Training and Advancement Opportunities Why This Job Our Fort Myers location is expanding! CMC is always looking to grow the services we can offer to our customers. In Fort Myers, we are adding a production line for Post Tension Cable! Please note that Operators hired for this position will start after May 1st. What You'll Do Attend training regarding applicable equipment Perform additional duties as needed Assist in loading fabricated rebar on trailers and unloading stock material from trailers Maintain the work area and equipment in a clean orderly condition Operate production machines in accordance with established procedures and guidelines Participates in the CMC Safety Programs and proactively upholds the CMC Safety Culture Crosstrain on multiple machines Operate rebar fabrication equipment, such as shears, benders, cranes, forklift, threaders, forging, welders, etc. What You'll Need Must be able to work outside under all weather conditions to include working in the heat and cold weather Able and willing to cross train as required Follow OSHA, EPA, and company safety policies, rules, and regulations Possess a strong work ethic and practice safe working habits Ability to work as a team player in a fast paced environment, with strong work ethic, pay attention to detail and find root causes for issues Ability to operate fabrication machines in a safe manner without supervision Able to work overtime as business requires Must be able to lift 50 pounds, climb ladders and steps, work outside under all weather conditions when needed Must be able to read technical documents and service manuals Possess knowledge of commonly used concepts, practices, and procedures in the industrial field Excellent communication skills, in both written and verbal form are necessary to be successful in this role Minimum 1 year working with heavy industrial environment experience preferred but not required Must be able to work overtime, either planned or unplanned for emergency situations Must possess work ethic and ability to be punctual Stand for long periods of time Your Education High School Diploma, GED, or equivalent experience preferred We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years - and we're just getting started. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC. Apply today and start moving your career - and our world - forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. You should be proficient in: Production Optimization Warehouse Experience Material Handler Experience Packaging Experience Machines & technologies you'll use: Electric Pallet Jack Extrusion Machine Forklifts

FORTNA partners with the world's leading brands to transform omnichannel and parcel distribution operations. Known world-wide for enabling companies to keep pace with digital disruption and growth objectives, we design and deliver solutions, powered by intelligent software, to optimize fast, accurate and cost-effective order fulfillment and last mile delivery. Our people, innovative approach and proprietary algorithms and tools ensure optimal operations design and material and information flow. We deliver exceptional value every day to our customers with comprehensive services and products including network strategy, distribution center operational design and implementation, material handling automated equipment, robotics and a comprehensive suite of lifecycle services. At FORTNA, we believe in fostering a workplace that isn't just a job but a movement - a collective effort to redefine success and transform challenges into opportunities. "Join the Movement" encapsulates our commitment to a workplace culture that thrives on collaboration, celebrates diversity, and empowers every individual to contribute to something greater than themselves. Our Team. Our Passion. Our Approach. JOB TITLE: Machine Operator JOB TYPE: Hourly, Non-Exempt REPORTS TO: Fabrication Supervisor SHIFT: 1ST This role starts at $20.00 an hour. JOB SUMMARY: Under general supervision Machine Operators are responsible for the setup, calibration, and operation of fabrication machining equipment including horizontal bandsaws, CNC press brakes and CNC lasers. Machine Operators must be able to work from verbal and written instructions including blueprints, engineering drawings or models. It is the operator's responsibility to inspect machining operations and finished product against specified tolerances using measuring tools including tape measures, square, calipers, etc. If a part is out of tolerance basic troubleshooting and correction is required. It is also the Machine Operators responsibility to perform routine maintenance and cleaning of their equipment. ESSENTIAL FUNCTIONS: The ability to operate a variety of machines in the factory (lasers/press brakes/bandsaws). The ability to interface with other departments to accomplish tasks (Quality/Safety/Engineering). The ability to use appropriate measuring instruments for the task (calipers, tape measures, protractors). The ability to use and operate hand tools. Ability to stand for up to 10 hours per day. The ability to operate a forklift and crane. DESIRED QUALIFICATIONS ONCE IN THE ROLE INCLUDE: Minimum of one-year experience operating a forklift. Basic blueprint reading skills. Basic math skills. Ability to follow verbal and written instructions. Strong interpersonal skills, excellent communication and organizational skills. Demonstrated commitment to safety. Positive attitude with the ability to work independently and in a team environment. REQUIRED SKILL/ QUALIFICATIONS: Must be able to read a tape measure. Must be accountable and results driven. Must be able to lift to 50 lbs. Must pass pre-employment and random drug screen. Attachments This job description describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Employees may be required to perform any other job-related duties as requested by their supervisor. It is the policy of FORTNA and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, FORTNA will provide reasonable accommodations for qualified individuals with disabilities.

it's what's inside that counts _______________________________ There's more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it's the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: * Day 1 Benefits Coverage with low cost Medical, Vision, Dental * Day 1 Paid-time Off and Vacation * 4.5% Company Match 401(k) plan * $500 Annual Company-paid Lifestyle Benefit * Competitive Compensation and Bonuses * Company-paid Life and Disability Insurance * Employee Stock Purchase Plan * Training and Advancement Opportunities Why This Job CMC provides an excellent opportunity to learn the steel, construction reinforcement and ground stabilization industries and to grow in your career. Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and support from your team that you need to excel in your role and reach your full potential. What You'll Do * Assist maintenance personnel when requested/needed * Work safely to prevent on the job injuries by following safety rules and regulations at all times including proper wearing of company PPE * Be alert of unsafe conditions at all times and report them immediately * Effectively communicate with others about possible production issues, concerns, and needs * Ensure equipment inspection reports are filled out each shift * Ensure the tasks and activities as directed by operations support management are carried out in a safe and timely manner * Perform minor/routine maintenance or repairs as needed without the assistance of maintenance personnel * Responsible for continuous improvement such as suggesting improvements in work methods and procedures * Responsible for daily housekeeping duties including but not limited to immediate work area * Troubleshoot work related problems using job knowledge, experience, and by communicating with others * Understand start up, shutdown, and emergency procedures What You'll Need * Ability to work as a team player in a fast-paced environment, with excellent strong work ethic, attention to detail, and organizational skills * Ability to work with exposure to extremes in temperature, chemical, dust fumes and mists, uneven surfaces, loud noise, elevated work areas, and confined spaces * Basic computer skills * Dependability in attendance, work completion, and flexibility to meet business needs * Must be able to learn quickly and multitask * Must be able to lift up to 50 lbs * Some overtime will be required * Work on a rotating shift which may include weekends and holidays Your Education * High School Diploma or GED required We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years - and we're just getting started. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC. Apply today and start moving your career - and our world - forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. Current Employee? Click Here to Apply. Current Employees Apply Click here to apply. Nearest Major Market: Jacksonville

Company: The Boeing Company Boeing Commercial Airplanes (BCA) is looking for an Associate or Experienced Quality Production Specialist (Level 2 or 3) to support the Supplier Quality Investigations team onsite in Seattle, Washington. The Quality Production Specialist will support our Seattle airplane programs through nonconformance reviews, quality investigations, and corrective action implementation and documentation. In this role, you will be expected to collaborate and communicate with internal and external stakeholders to develop and validate root cause corrective actions (RCCA) at external suppliers are effective in ensuring defect elimination. We are committed to providing our team with equal opportunity for growth in a stable work environment. We encourage every teammate to feel empowered to bring their best through creativity, innovation, and diversity, as this drives a positive culture through transparency, safety, quality, and respect. Above all, employees will be provided with the opportunity to seek, speak, and listen within the organization, and they are encouraged to share externally with each Boeing customer to build balanced work relationships. Position Responsibilities: Reviews and validates product non-conformances and disposition type, quality procedures and engineering requirements Performs analysis to identify and evaluate the quality of products, operations and processes to Quality Management System requirements, applicable company procedures, contract requirements or government regulations Applies knowledge of aerospace design, systems and integration to perform failure and forensic analysis of aerospace components and systems Trains and mentors fellow employees in the Quality Management System Performs root cause analysis on the nonconformance to identify the cause and prevent reoccurrence Independently develops, modifies and documents actions to assure problem resolution or to implement corrective/preventive action and documents resolution Obtains corrective action on nonconforming plans and hardware/processes Negotiates concurrence, obtains commitments for taking preventive and corrective action, prioritizes quality activities and ensures problem resolution Reviews and validates the corrective action plans and identifies effectivity to ensure completion Reviews and approves Quality planning changes or disposition of nonconformance hardware products/processes Guides validation of configuration management, quality procedures and material review policies to deliver the software products Develops software system processes to support changing industry standards Reviews and implements corrective action on audit results to ensure media is stored and handled per engineering defined requirements Interprets industry standards and provide recommendations for implementation Creates analytical reports and coordinates with the responsible parties for internal/external distribution Works under general direction Basic Qualifications (Required Skills/Experience): 1+ years of experience in Aerospace, Fabrication, or manufacturing environment 1+ years of experience in Quality Management Systems (QMS) 1+ years of experience in conducting a Root Cause Corrective Action (RCCA) associated with a complex technical issue 1+ years of experience in Microsoft Office Suite (Excel, Word, Outlook, PowerPoint) Preferred Qualifications (Desired Skills/Experience): Level 3: Requires 3+ years for all basic Qualifications 3+ years of experience in verification of requirements (command media) 3+ years of experience working with multiple internal stakeholders and suppliers 1+ years of experience assisting in the flow down quality requirements within the build plan 1+ years of experience with the Boeing Production System (BPS) 1+ years of experience as a Quality Inspector Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union: This is a union-represented position. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Level 2: $75,650 - $102,350 Level 3: $91,800 - $124,200 Language Requirements: Not Applicable Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This is not an Export Control position. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Company: The Boeing Company Boeing Defense, Space and Security (BDS) has an exciting opportunity for a Mid-Level Supplier Quality Production Specialist to join our team in Tukwila, WA! will have travel ~25% between Tukwila and Renton, WA. Position Responsibilities: Reviews and validates product non-conformances and disposition type, quality procedures and engineering requirements. Performs analysis to identify and evaluate the quality of products, operations and processes to Quality Management System requirements, applicable company procedures, contract requirements or government regulations. Applies knowledge of aerospace design, systems and integration to perform failure and forensic analysis of aerospace components and systems. Trains and mentors' fellow employees in the Quality Management System. Performs root cause analysis on the nonconformance to identify the cause and prevent recurrence. Independently develops, modifies and documents actions to assure problem resolution or to implement corrective/preventive action and documents resolution. Obtains corrective action on nonconforming plans and hardware/processes. Negotiates concurrence, obtains commitments for taking preventive and corrective action, prioritizes quality activities and ensures problem resolution. Reviews and validates the corrective action plans and identifies effectiveness to ensure completion. Reviews and approves Quality planning changes or disposition of nonconformance hardware products/processes. Guides validation of configuration management, quality procedures and material review policies to deliver the software products. Develop software system processes to support changing industry standards. Reviews and implements corrective action on audit results to ensure media is stored and handled per engineering defined requirements. Interprets industry standards and provide recommendations for implementation. Creates analytical reports and coordinates with the responsible parties for internal/external distribution. Works under general direction. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Basic Qualifications (Required Skills/Experience): 3+ year of experience in an aerospace, fabrication or manufacturing environment 3+ year of experience in Quality Management Systems (QMS) 3+ year of experience working in Non-Conformance (NCR) processes 3+ year of experience gathering data and performing a Root Cause Corrective Action (RCCA) Preferred Qualifications (Desired Skills/Experience): Associate's degree or higher More than 3 years of experience reading and interpreting engineering drawings, technical publications and/or specifications Experience working closely with other engineering disciplines in an integrated team environment Experience with regulatory requirements Experience using strong analytical and problem-solving skills Experience performing quantitative or statistical analysis, data collection, preparation and interpretation Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Travel: This position requires travel up to 25% of the time Shift: This role will be on 1st shift At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: USD $91,800 - $124,200 Language Requirements: Not Applicable Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Korry, a leading provider of aerospace electronics, is seeking a highly skilled Senior Electronics Technician to join our team. In this role, you will be a critical part of our production line, tackling complex technical challenges and ensuring the quality and reliability of our aerospace-grade components. This is not a typical assembly or repair role; we need a true problem-solver with deep technical knowledge who can diagnose intricate issues at a component level. What You Will Do * Troubleshooting & Diagnosis: Independently perform in-depth troubleshooting of complex functional test failures on electronic and electro-mechanical assemblies. This includes diagnosing issues down to the component level (e.g., resistors, capacitors, integrated circuits). * Root Cause Analysis: Utilize advanced diagnostic tools and techniques to identify the root cause of failures, rather than just replacing parts. * Testing & Repair: Conduct a variety of electronic tests and repairs on aerospace components, ensuring compliance with strict industry standards. * Technical Documentation: Read and interpret complex technical drawings, schematics, and wiring diagrams to guide your work. You will also be expected to accurately document all repair and test data. * Mentorship: Act as a technical resource and mentor for junior technicians, sharing your expertise and helping to solve challenging production issues. * Continuous Improvement: Identify and recommend improvements to existing test procedures, equipment, or documentation to enhance efficiency and quality. Preferred Education: * An Associate's Degree in Electronics Technology or a related field, or equivalent military training. Preferred Experience: * A minimum of 4+ years of hands-on experience in electronics manufacturing, troubleshooting, and repair. Preferred Specialized Skills and Experience: * Proficiency in reading and interpreting complex electrical schematics and wiring diagrams. * Demonstrated experience with advanced diagnostic equipment, such as oscilloscopes, digital multimeters (DMMs), spectrum analyzers, and signal generators. * Strong understanding of both analog and digital electronics, including circuit theory, power supplies, and signal integrity. * Proven ability to perform component-level soldering and rework on intricate printed circuit boards (PCBs). * Previous experience working in a highly regulated environment, with specific knowledge of FAA Part 145 regulations, is highly preferred. * The ability to work under limited supervision, prioritize tasks, and independently solve complex technical problems. Schedule: Day Shift, Monday - Friday, 6:00am to 2:30pm. Occasional overtime, including weekends, may be required to meet production deadlines. Salary Range Please note the typical hiring range is $40.00 - $50.00 hourly. Job offers within the range are based on significant job qualifications and pay equity.

Korry, a leading provider of aerospace electronics, is seeking a highly skilled Senior Electronics Technician to join our team. In this role, you will be a critical part of our production line, tackling complex technical challenges and ensuring the quality and reliability of our aerospace-grade components. This is not a typical assembly or repair role; we need a true problem-solver with deep technical knowledge who can diagnose intricate issues at a component level. What You Will Do Troubleshooting & Diagnosis: Independently perform in-depth troubleshooting of complex functional test failures on electronic and electro-mechanical assemblies. This includes diagnosing issues down to the component level (e.g., resistors, capacitors, integrated circuits). Root Cause Analysis: Utilize advanced diagnostic tools and techniques to identify the root cause of failures, rather than just replacing parts. Testing & Repair: Conduct a variety of electronic tests and repairs on aerospace components, ensuring compliance with strict industry standards. Technical Documentation: Read and interpret complex technical drawings, schematics, and wiring diagrams to guide your work. You will also be expected to accurately document all repair and test data. Mentorship: Act as a technical resource and mentor for junior technicians, sharing your expertise and helping to solve challenging production issues. Continuous Improvement: Identify and recommend improvements to existing test procedures, equipment, or documentation to enhance efficiency and quality. Preferred Education: An Associate's Degree in Electronics Technology or a related field, or equivalent military training. Preferred Experience: A minimum of 4+ years of hands-on experience in electronics manufacturing, troubleshooting, and repair. Preferred Specialized Skills and Experience: Proficiency in reading and interpreting complex electrical schematics and wiring diagrams. Demonstrated experience with advanced diagnostic equipment, such as oscilloscopes, digital multimeters (DMMs), spectrum analyzers, and signal generators. Strong understanding of both analog and digital electronics, including circuit theory, power supplies, and signal integrity. Proven ability to perform component-level soldering and rework on intricate printed circuit boards (PCBs). Previous experience working in a highly regulated environment, with specific knowledge of FAA Part 145 regulations, is highly preferred. The ability to work under limited supervision, prioritize tasks, and independently solve complex technical problems. Schedule: Day Shift, Monday - Friday, 6:00am to 2:30pm. Occasional overtime, including weekends, may be required to meet production deadlines. Salary Range Please note the typical hiring range is $40.00 - $50.00 hourly. Job offers within the range are based on significant job qualifications and pay equity. Company Description: Eligible candidates must be authorized to work in the U.S. This position requires access to export control information. To conform to US Export Control regulations, applicant should be eligible for any required authorizations from the US Government. Korry Electronics is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of age, race, color, religion, sex, sexual orientation, gender identity or expression, medical condition, national origin, marital status, disability, pregnancy or parental status, childbirth, genetic information, or military and veteran status. Thank you for your interest in Korry Electronics! Our company culture is focused around ownership, transparency, process improvement and trust & respect. We are looking for talented people (like you!) to lead our business to the next level while giving you the opportunity to develop your own career. We have been at the forefront of the aviation industry since the beginning, creating the first lighted cockpit controls for the military and commercial aircraft industry. The Korry product team continues this tradition as it develops the crew station of the future, providing state-of-the-art switches, cockpit controls, high-performance displays, and night-vision filters. We are passionate about what we do. For more information, please visit ************** Join the Korry team and find out why this is such a great place to spend your career! Korry Electronics is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of age, race, color, religion, sex, sexual orientation, gender identity or expression, medical condition, national origin, marital status, disability, pregnancy or parental status, childbirth, genetic information, or military and veteran status.

**$500 Hiring Bonus! ** Applicants will receive $250 after their first 30 days, and an additional $250 upon reaching 90 days of employment. Pay Rate: $17.25 hourly, reviewed after 90 days and annually 3rd shift schedule is 9:30 PM to 6:00 AM Monday-Friday **Occasional Saturday shifts for quarterly training or production catch-ups are required Green Revolution is a leading legal cannabis products manufacturer and distributor in Washington State. We pride ourselves on delivering the highest quality, most consistent, and diverse portfolio of cannabis goods. Our commitment to sustainability and socially responsible practices is evident in every aspect of our business. Our products are gluten-free, Kosher, and at the FDA level of food production with safety, quality, and customer service as critical aspects. As a 3rd Shift Production Operator, you will be responsible for assisting with the production of various cannabis products (Beverages, Edibles, Tinctures, etc.). You will work as part of a team to create products that meet our high standards for quality and consistency. Experience in the food and beverage industry is a plus! Cannabis knowledge is not required, and we provide ample training to make you as successful as possible. This fast-paced role requires attention to detail, the ability to follow strict procedures, and a commitment to safety. If you are passionate about your work and want to be part of a dynamic team, we encourage you to apply. Responsibilities Assist with the production of cannabis products, including preparing, packaging, and labeling Maintain accurate records of all production activities Ensure that all products meet our high standards for quality and consistency Follow strict procedures to ensure compliance with local, state, and federal regulations Participate in regular training to stay up-to-date on industry developments and best practices Maintain a clean and organized work environment to uphold our commitment to safety and quality Assist with inventory management and restocking of production materials Requirements Applicants should have a positive attitude with a growth mindset. We are a close-knit team that is expanding rapidly. Opportunity for growth is absolute. Be able to physically work fast, on one's feet doing repetitive tasks for long periods of time. Be able to lift 35-50 pounds -Mechanical or technical aptitude is a big plus. Experience being part of a constantly growing team. Must obtain a WA food handler's card within 10 days of beginning work. Multiple tasks done outside of baking and beverage production will be a requirement. Previous experience in a packaging or production environment is a plus. Experience designing and changing processes and procedures to increase quality and productivity is preferred. Experience with multiple pieces of equipment in the packaging, food, or beverage industry is strongly preferred, but will consider technical aptitude in lieu of experience. Experience with mixing using established recipes is preferred but will train the right applicant. Knowledge of scales and adjusting recipes based on production needs is preferred, but not required. Employees must have WA state identification on their person available for inspection at all times by compliance entities Must be 21 years of age or older EEO Statement Green Revolution is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law. Benefits Benefits Discounted cannabis products at nearly all Washington Retail stores. 401(k) Retirement Plan FREE Employee Assistance Program Dental insurance Medical insurance Vision insurance Sixty hours paid vacation after first year of employment. Regular paid sick leave. Unpaid Time off may be available upon request. Job Type: Full-time M-F

**$500 Hiring Bonus! ** Applicants will receive $250 after their first 30 days, and an additional $250 upon reaching 90 days of employment. We are now offering an attendance bonus starting November 1st. 1st month perfect attendance- $50, 2nd month $100, and 3rd month $150. Pay Rate: $16.66 hourly, reviewed after 90 days and annually 1st shift schedule is 6:00 AM to 2:30 PM M-F (Our Kitchen staff starts at 5:30 in some cases) Green Revolution is a leading legal cannabis products manufacturer and distributor in Washington State. We pride ourselves on delivering the highest quality, most consistent, and diverse portfolio of cannabis goods. Our commitment to sustainability and socially responsible practices is evident in every aspect of our business. Our products are gluten-free, Kosher, and at the FDA level of food production with safety, quality, and customer service as a critical aspect. As a 1st Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.). You will work as part of a team to create products that meet our high standards for quality and consistency. Experience in the food and beverage industry is a plus! Cannabis knowledge is not required, and we provide ample training to make you as successful as possible. This is a fast-paced role that requires attention to detail, the ability to follow strict procedures, and a commitment to safety. If you are passionate about your work and want to be part of a dynamic team, we encourage you to apply. Responsibilities Assist with the production of cannabis products, including preparing, packaging, and labeling Maintain accurate records of all production activities Ensure that all products meet our high standards for quality and consistency Follow strict procedures to ensure compliance with local, state, and federal regulations Participate in regular training to stay up-to-date on industry developments and best practices Maintain a clean and organized work environment to uphold our commitment to safety and quality Assist with inventory management and restocking of production materials Requirements Requirements Applicants should have a positive attitude with a growth mindset. We are a close-knit team that is expanding rapidly. Opportunity for growth is absolute. Be able to physically work fast, on one's feet doing repetitive tasks for long periods of time. Be able to lift 35-50 pounds -Mechanical or technical aptitude is a big plus. Experience being part of a constantly growing team. Must obtain a WA food handler's card within 10 days of beginning work. Multiple tasks done outside of baking and beverage production will be a requirement. Previous experience in a packaging or production environment is a plus. Experience designing and changing processes and procedures to increase quality and productivity is preferred. Experience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. Experience with mixing using established recipes is preferred, but will train the right applicant. Knowledge of scales and adjusting recipes based on production needs is preferred, but not required. Employees must have WA state identification on their person available for inspection at all times by compliance entities Must be 21 years of age or older EEO Statement Green Revolution is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law. Benefits Benefits: Discounted cannabis products at nearly all Washington Retail stores. FREE Employee Assistance Program (EAP) 401(k) Retirement Plan Medical insurance Dental insurance Vision insurance Sixty hours paid vacation after the first year of employment. Paid sick leave. Unpaid Time off may be available upon request. Job Type: Full-time M-F

**$500 Hiring Bonus! ** Applicants will receive $250 after their first 30 days, and an additional $250 upon reaching 90 days of employment. Pay Rate: $17.00 hourly, reviewed after 90 days and annually 2nd shift schedule is 1:30 PM to 10:00 PM M-F **Occasional Saturday shifts for quarterly training or production catch-ups are required Green Revolution is a leading legal cannabis products manufacturer and distributor in Washington State. We pride ourselves on delivering the highest quality, most consistent, and diverse portfolio of cannabis goods. Our commitment to sustainability and socially responsible practices is evident in every aspect of our business. Our products are gluten-free, Kosher, and at the FDA level of food production with safety, quality, and customer service as a critical aspect. As a 2nd Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.). You will work as part of a team to create products that meet our high standards for quality and consistency. Experience in the food and beverage industry is a plus! Cannabis knowledge is not required, and we provide ample training to make you as successful as possible. This is a fast-paced role that requires attention to detail, the ability to follow strict procedures, and a commitment to safety. If you are passionate about your work and want to be part of a dynamic team, we encourage you to apply. Responsibilities Assist with the production of cannabis products, including preparing, packaging, and labeling Maintain accurate records of all production activities Ensure that all products meet our high standards for quality and consistency Follow strict procedures to ensure compliance with local, state, and federal regulations Participate in regular training to stay up-to-date on industry developments and best practices Maintain a clean and organized work environment to uphold our commitment to safety and quality Assist with inventory management and restocking of production materials Requirements Applicants should have a positive attitude with a growth mindset. We are a close-knit team that is expanding rapidly. Opportunity for growth is absolute. Be able to physically work fast, on one's feet doing repetitive tasks for long periods of time. Be able to lift 35-50 pounds -Mechanical or technical aptitude is a big plus. Experience being part of a constantly growing team. Must obtain a WA food handler's card within 10 days of beginning work. Multiple tasks done outside of baking and beverage production will be a requirement. Previous experience in a packaging or production environment is a plus. Experience designing and changing processes and procedures to increase quality and productivity is preferred. Experience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. Experience with mixing using established recipes is preferred, but will train the right applicant. Knowledge of scales and adjusting recipes based on production needs is preferred, but not required. Employees must have WA state identification on their person available for inspection at all times by compliance entities Must be 21 years of age or older EEO Statement Green Revolution is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law. Benefits Discounted cannabis products at nearly all Washington Retail stores. 401(k) Retirement Plan Dental insurance Medical insurance Vision insurance FREE Employee Assistance Program Sixty hours paid vacation after first year of employment. Regular paid sick leave. Unpaid Time off may be available upon request. Job Type: Full-time M-F

Job Description **$500 Hiring Bonus! ** Applicants will receive $250 after their first 30 days, and an additional $250 upon reaching 90 days of employment. Pay Rate: $17.00 hourly, reviewed after 90 days and annually 2nd shift schedule is 1:30 PM to 10:00 PM M-F **Occasional Saturday shifts for quarterly training or production catch-ups are required Green Revolution is a leading legal cannabis products manufacturer and distributor in Washington State. We pride ourselves on delivering the highest quality, most consistent, and diverse portfolio of cannabis goods. Our commitment to sustainability and socially responsible practices is evident in every aspect of our business. Our products are gluten-free, Kosher, and at the FDA level of food production with safety, quality, and customer service as a critical aspect. As a 2nd Shift Production Operator, you will be responsible for assisting with the production of a variety of cannabis products (Beverages, Edibles, Tinctures, etc.). You will work as part of a team to create products that meet our high standards for quality and consistency. Experience in the food and beverage industry is a plus! Cannabis knowledge is not required, and we provide ample training to make you as successful as possible. This is a fast-paced role that requires attention to detail, the ability to follow strict procedures, and a commitment to safety. If you are passionate about your work and want to be part of a dynamic team, we encourage you to apply. Responsibilities Assist with the production of cannabis products, including preparing, packaging, and labeling Maintain accurate records of all production activities Ensure that all products meet our high standards for quality and consistency Follow strict procedures to ensure compliance with local, state, and federal regulations Participate in regular training to stay up-to-date on industry developments and best practices Maintain a clean and organized work environment to uphold our commitment to safety and quality Assist with inventory management and restocking of production materials Requirements Applicants should have a positive attitude with a growth mindset. We are a close-knit team that is expanding rapidly. Opportunity for growth is absolute. Be able to physically work fast, on one's feet doing repetitive tasks for long periods of time. Be able to lift 35-50 pounds -Mechanical or technical aptitude is a big plus. Experience being part of a constantly growing team. Must obtain a WA food handler's card within 10 days of beginning work. Multiple tasks done outside of baking and beverage production will be a requirement. Previous experience in a packaging or production environment is a plus. Experience designing and changing processes and procedures to increase quality and productivity is preferred. Experience with multiple pieces of equipment in the packaging, food, or beverage industry strongly preferred, but will consider technical aptitude in lieu of experience. Experience with mixing using established recipes is preferred, but will train the right applicant. Knowledge of scales and adjusting recipes based on production needs is preferred, but not required. Employees must have WA state identification on their person available for inspection at all times by compliance entities Must be 21 years of age or older EEO Statement Green Revolution is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law. Benefits Discounted cannabis products at nearly all Washington Retail stores. 401(k) Retirement Plan Dental insurance Medical insurance Vision insurance FREE Employee Assistance Program Sixty hours paid vacation after first year of employment. Regular paid sick leave. Unpaid Time off may be available upon request. Job Type: Full-time M-F