Quality Control Inspector jobs at Wilcox Industries - 31 jobs

Canam Bridges designs, manufactures and installs steel bridges for major infrastructure contractors across North America. Canam Bridges is a member of Canam Group, which has over 5,100 employees and operates 22 plants in North America, as well as engineering offices in Canada, Romania, India and the Philippines. Job Description MUST BE AUTHORIZED TO WORK IN THE USA Responsible for ensuring compliance with all applicable codes and standards, AWS, CWB, shop drawings, weld-maps and tolerances as specified in the quality assurance manual. Inspects welded product and dimensions. Document inspections on required QC forms and drawings. ESSENTIAL FUNCTIONS: Monitors welding on a spot check basis. Monitors the welding procedures on a spot check basis (weekly) and records the results. Responsible for completing the Inspection and Test Plan. Performs dimensional inspection and visual inspection (excluding finished welds). Performs non-destructive testing (if qualified). The technician takes notes of all non-executed processes of inspection, the Forman must inform the technician as to advancement of the work. Inspects product for quality assurance standards using current methodology and techniques. Communicates routinely throughout the day with production leads, supervisors, and QA Manager. Provides technical and operation support and/or services to ensure quality assurance standards are met in providing support to various project tasks. Assesses and trains new employees as necessary. Assists other employees in the performance of their duties as necessary. Works under the direction of the QC Manager. Performs other job duties as assigned by the Manager. Qualifications CWI Required Five (5) years welding experience. Possess math skills in imperial and metric systems. Read measuring tape, add and subtract simple fractions and decimals. Read and interpret work orders, job specification sheets and approved shop drawings. Ability to work independently without direct supervision and as a team member. Lift up to 60 lbs. Read and speak English Experience in Structural Steel operations (preferred) HS Diploma (preferred) Additional Information Work Environment: General office, production environment and plant operation. Daily exposure to computer display and shop environment. Remuneration: We offer a competitive compensation and benefits package as well as excellent opportunities for training and advancement. Canam Bridges, US, Inc. is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need a reasonable accommodation for any part of the employment process, please contact us and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to.

Reads and interprets work instructions and blueprints to determine dimensions and tolerances. Interprets Geometric Dimensioning & Tolerance. Measures, inspects, tests and verifies machined, welded and finished parts for conformance to specifications. Manually operates CMM's, height gages, comparator, etc. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES * Supports First Piece, In-Process, Final, and F.A.I. Inspections. * Reads blueprints or specifications to determine dimensions and tolerances. * Verifies specified dimensions of product or raw material using verniers, micrometers, intramics, CMM, height gages, comparator, scales and or/other tools. * Measures angular dimensions, radii, height, thickness, location, thread lead, and other specifications. * Computes angles, radii, and other unspecified dimensions of work piece by using sine bars. * Measures surface finish of parts. Inspects first run parts and assemblies. * Examines material or product for surface defects such as cracks, pits, and incomplete welds. * Tests units for fit of moving parts and mechanical functioning. * Tests parts for hardness. * Compares product with parts list or sample model to ensure completion of assembly. * Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag. * Writes reports regarding inspection and testing results. * Manually operates and sets up Mitutoyo CMM's and FARO Arm. * Supports inspection duties, quality objectives, and the Quality Management System. * Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. * Verifies conformance of finished work piece to specifications. * Assists in other areas in support of product conformity. * Facilitates effective communications and working relationships (including answering department phone). * Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. * Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers, and collaborating with them to accomplish shared purposes and goals. * Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations.

Job Description Reads and interprets work instructions and blueprints to determine dimensions and tolerances. Interprets Geometric Dimensioning & Tolerance. Measures, inspects, tests and verifies machined, welded and finished parts for conformance to specifications. Manually operates CMM's, height gages, comparator, etc. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports First Piece, In-Process, Final, and F.A.I. Inspections. Reads blueprints or specifications to determine dimensions and tolerances. Verifies specified dimensions of product or raw material using verniers, micrometers, intramics, CMM, height gages, comparator, scales and or/other tools. Measures angular dimensions, radii, height, thickness, location, thread lead, and other specifications. Computes angles, radii, and other unspecified dimensions of work piece by using sine bars. Measures surface finish of parts. Inspects first run parts and assemblies. Examines material or product for surface defects such as cracks, pits, and incomplete welds. Tests units for fit of moving parts and mechanical functioning. Tests parts for hardness. Compares product with parts list or sample model to ensure completion of assembly. Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag. Writes reports regarding inspection and testing results. Manually operates and sets up Mitutoyo CMM's and FARO Arm. Supports inspection duties, quality objectives, and the Quality Management System. Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Verifies conformance of finished work piece to specifications. Assists in other areas in support of product conformity. Facilitates effective communications and working relationships (including answering department phone). Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers, and collaborating with them to accomplish shared purposes and goals. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. AAP/EEO STATEMENT GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. SEARCH / RECRUITING AGENCIES Granite State Manufacturing (GSM) does not accept non-solicited resumes or candidate submittals from search/recruiting agencies unless GSM requests such resumes, and the search/recruiting agency is on GSM's approved list of such agencies. Unsolicited resumes or candidate information submitted to GSM by search/recruiting agencies shall become the property of GSM and if the candidate is subsequently hired by GSM, GSM shall not owe any fee to the submitting agency. Requirements Two-year certification from college or technical school; or 5 years related experience and/or training; or equivalent combination of education and experience. Ability to manually operate and set up Mitutoyo CMM's. Must know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Must be flexible enough to work in all areas of operation per the direction of the Leadership. A personal and professional background sufficient to secure a Government Security Clearance is required. Advanced knowledge of inspection, plating & coating processes and raw materials a plus. Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation …and much more.

Perform NDT inspections (VT, PT, MT) and assist in weld/NDT record review, GSM NDT procedure review, and supporting other NDT inspectors in their daily activities. Measures, inspects, tests, and verifies machined, welded, and finished parts for conformance to specifications and perform supporting tasks such as receiving inspection, internal/external audits, and first piece inspections. Requirements ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Perform NDT testing and properly document results per customer and GSM requirements. Review NDT and weld records for completeness and accuracy. Review contracts, blueprints, and customer / industry specifications to determine dimensions, tolerances and any other applicable inspection and test criteria or requirements. Prepare and review technical reports for accuracy. Verify conformance to specifications including measurement of angular dimensions, radii, contours, clearances, thread lead, and surface finish. Utilize measurement tools such as calipers, micrometers, optical comparators, height gages, fillet gages, and others. Document inspection and test results including first run parts, assemblies, finished product, etc. Verify raw materials, including critical application materials, through the review of chemical and physical data on certified material test reports. Witness tests and manufacturing activities to ensures accuracy of reports. Examine defective parts to determine root cause of defects and recommends changes or modifications. Support customer and government source inspections. Validate that subcontract operations such as heat treat, plating, testing, and other functions satisfy purchase order requirements. Support the activities related to the execution of the Quality Management System. Must be flexible enough to work in all areas of operation per the direction of the leadership. Assist other departments in support of product conformity. Facilitate effective communications and working relationships. Demonstrate responsibility and accountability for creating a professional, safe, and clean environment evidenced by being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrate commitment to teamwork by establishing collaborative relationships with networks with managers, directors, and workers to achieve shared purposes and goals. Abide by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Other duties as assigned. QUALIFICATIONS, SKILLS, AND ABILITIES ASNT certified in Visual Testing Level II and Liquid Penetrant Testing Level II or provide previous certification documents quantifying OJT experience. Magnetic Particle Level II certification strongly desired. Two-year certification from college or technical school, five years of related experience and/or training, or equivalent combination of education and experience. Strong familiarity with raw material requirements, non-destructive testing, calibration, GD&T (ASME Y14.5), bills of materials, mil-specs, manufacturing, and other related technical documentation. Able to pass vision acuity exam. Able to work independently without supervision and support other non-destructive testing inspectors in their daily activities. Able to secure a government security clearance if required. Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation ...and much more.

Job Description Perform NDT inspections (VT, PT, MT) and assist in weld/NDT record review, GSM NDT procedure review, and supporting other NDT inspectors in their daily activities. Measures, inspects, tests, and verifies machined, welded, and finished parts for conformance to specifications and perform supporting tasks such as receiving inspection, internal/external audits, and first piece inspections. Requirements ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Perform NDT testing and properly document results per customer and GSM requirements. Review NDT and weld records for completeness and accuracy. Review contracts, blueprints, and customer / industry specifications to determine dimensions, tolerances and any other applicable inspection and test criteria or requirements. Prepare and review technical reports for accuracy. Verify conformance to specifications including measurement of angular dimensions, radii, contours, clearances, thread lead, and surface finish. Utilize measurement tools such as calipers, micrometers, optical comparators, height gages, fillet gages, and others. Document inspection and test results including first run parts, assemblies, finished product, etc. Verify raw materials, including critical application materials, through the review of chemical and physical data on certified material test reports. Witness tests and manufacturing activities to ensures accuracy of reports. Examine defective parts to determine root cause of defects and recommends changes or modifications. Support customer and government source inspections. Validate that subcontract operations such as heat treat, plating, testing, and other functions satisfy purchase order requirements. Support the activities related to the execution of the Quality Management System. Must be flexible enough to work in all areas of operation per the direction of the leadership. Assist other departments in support of product conformity. Facilitate effective communications and working relationships. Demonstrate responsibility and accountability for creating a professional, safe, and clean environment evidenced by being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrate commitment to teamwork by establishing collaborative relationships with networks with managers, directors, and workers to achieve shared purposes and goals. Abide by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Other duties as assigned. QUALIFICATIONS, SKILLS, AND ABILITIES ASNT certified in Visual Testing Level II and Liquid Penetrant Testing Level II or provide previous certification documents quantifying OJT experience. Magnetic Particle Level II certification strongly desired. Two-year certification from college or technical school, five years of related experience and/or training, or equivalent combination of education and experience. Strong familiarity with raw material requirements, non-destructive testing, calibration, GD&T (ASME Y14.5), bills of materials, mil-specs, manufacturing, and other related technical documentation. Able to pass vision acuity exam. Able to work independently without supervision and support other non-destructive testing inspectors in their daily activities. Able to secure a government security clearance if required. Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation …and much more.

Job Description Perform NDT inspections (VT, PT, MT) and assist in weld/NDT record review, GSM NDT procedure review, and supporting other NDT inspectors in their daily activities. Measures, inspects, tests, and verifies machined, welded, and finished parts for conformance to specifications and perform supporting tasks such as receiving inspection, internal/external audits, and first piece inspections. Requirements ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Perform NDT testing and properly document results per customer and GSM requirements. Review NDT and weld records for completeness and accuracy. Review contracts, blueprints, and customer / industry specifications to determine dimensions, tolerances and any other applicable inspection and test criteria or requirements. Prepare and review technical reports for accuracy. Verify conformance to specifications including measurement of angular dimensions, radii, contours, clearances, thread lead, and surface finish. Utilize measurement tools such as calipers, micrometers, optical comparators, height gages, fillet gages, and others. Document inspection and test results including first run parts, assemblies, finished product, etc. Verify raw materials, including critical application materials, through the review of chemical and physical data on certified material test reports. Witness tests and manufacturing activities to ensures accuracy of reports. Examine defective parts to determine root cause of defects and recommends changes or modifications. Support customer and government source inspections. Validate that subcontract operations such as heat treat, plating, testing, and other functions satisfy purchase order requirements. Support the activities related to the execution of the Quality Management System. Must be flexible enough to work in all areas of operation per the direction of the leadership. Assist other departments in support of product conformity. Facilitate effective communications and working relationships. Demonstrate responsibility and accountability for creating a professional, safe, and clean environment evidenced by being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrate commitment to teamwork by establishing collaborative relationships with networks with managers, directors, and workers to achieve shared purposes and goals. Abide by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Other duties as assigned. QUALIFICATIONS, SKILLS, AND ABILITIES ASNT certified in Visual Testing Level II and Liquid Penetrant Testing Level II or provide previous certification documents quantifying OJT experience. Magnetic Particle Level II certification strongly desired. Two-year certification from college or technical school, five years of related experience and/or training, or equivalent combination of education and experience. Strong familiarity with raw material requirements, non-destructive testing, calibration, GD&T (ASME Y14.5), bills of materials, mil-specs, manufacturing, and other related technical documentation. Able to pass vision acuity exam. Able to work independently without supervision and support other non-destructive testing inspectors in their daily activities. Able to secure a government security clearance if required. Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation …and much more.

Perform NDT inspections (VT, PT, MT) and assist in weld/NDT record review, GSM NDT procedure review, and supporting other NDT inspectors in their daily activities. Measures, inspects, tests, and verifies machined, welded, and finished parts for conformance to specifications and perform supporting tasks such as receiving inspection, internal/external audits, and first piece inspections.

Perform NDT inspections (VT, PT, MT) and assist in weld/NDT record review, GSM NDT procedure review, and supporting other NDT inspectors in their daily activities. Measures, inspects, tests, and verifies machined, welded, and finished parts for conformance to specifications and perform supporting tasks such as receiving inspection, internal/external audits, and first piece inspections. Requirements ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Perform NDT testing and properly document results per customer and GSM requirements. Review NDT and weld records for completeness and accuracy. Review contracts, blueprints, and customer / industry specifications to determine dimensions, tolerances and any other applicable inspection and test criteria or requirements. Prepare and review technical reports for accuracy. Verify conformance to specifications including measurement of angular dimensions, radii, contours, clearances, thread lead, and surface finish. Utilize measurement tools such as calipers, micrometers, optical comparators, height gages, fillet gages, and others. Document inspection and test results including first run parts, assemblies, finished product, etc. Verify raw materials, including critical application materials, through the review of chemical and physical data on certified material test reports. Witness tests and manufacturing activities to ensures accuracy of reports. Examine defective parts to determine root cause of defects and recommends changes or modifications. Support customer and government source inspections. Validate that subcontract operations such as heat treat, plating, testing, and other functions satisfy purchase order requirements. Support the activities related to the execution of the Quality Management System. Must be flexible enough to work in all areas of operation per the direction of the leadership. Assist other departments in support of product conformity. Facilitate effective communications and working relationships. Demonstrate responsibility and accountability for creating a professional, safe, and clean environment evidenced by being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrate commitment to teamwork by establishing collaborative relationships with networks with managers, directors, and workers to achieve shared purposes and goals. Abide by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Other duties as assigned. QUALIFICATIONS, SKILLS, AND ABILITIES ASNT certified in Visual Testing Level II and Liquid Penetrant Testing Level II or provide previous certification documents quantifying OJT experience. Magnetic Particle Level II certification strongly desired. Two-year certification from college or technical school, five years of related experience and/or training, or equivalent combination of education and experience. Strong familiarity with raw material requirements, non-destructive testing, calibration, GD&T (ASME Y14.5), bills of materials, mil-specs, manufacturing, and other related technical documentation. Able to pass vision acuity exam. Able to work independently without supervision and support other non-destructive testing inspectors in their daily activities. Able to secure a government security clearance if required. Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation …and much more.

Reads and interprets work instructions and blueprints to determine dimensions and tolerances. Interprets Geometric Dimensioning & Tolerance. Measures, inspects, tests and verifies machined, welded and finished parts for conformance to specifications. Manually operates CMM's, height gages, comparator, etc. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports First Piece, In-Process, Final, and F.A.I. Inspections. Reads blueprints or specifications to determine dimensions and tolerances. Verifies specified dimensions of product or raw material using verniers, micrometers, intramics, CMM, height gages, comparator, scales and or/other tools. Measures angular dimensions, radii, height, thickness, location, thread lead, and other specifications. Computes angles, radii, and other unspecified dimensions of work piece by using sine bars. Measures surface finish of parts. Inspects first run parts and assemblies. Examines material or product for surface defects such as cracks, pits, and incomplete welds. Tests units for fit of moving parts and mechanical functioning. Tests parts for hardness. Compares product with parts list or sample model to ensure completion of assembly. Rejects defective parts, and marks type of defect on part, container of parts, or inspection tag. Writes reports regarding inspection and testing results. Manually operates and sets up Mitutoyo CMM's and FARO Arm. Supports inspection duties, quality objectives, and the Quality Management System. Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements. Verifies conformance of finished work piece to specifications. Assists in other areas in support of product conformity. Facilitates effective communications and working relationships (including answering department phone). Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers, and collaborating with them to accomplish shared purposes and goals. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. AAP/EEO STATEMENT GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. SEARCH / RECRUITING AGENCIES Granite State Manufacturing (GSM) does not accept non-solicited resumes or candidate submittals from search/recruiting agencies unless GSM requests such resumes, and the search/recruiting agency is on GSM's approved list of such agencies. Unsolicited resumes or candidate information submitted to GSM by search/recruiting agencies shall become the property of GSM and if the candidate is subsequently hired by GSM, GSM shall not owe any fee to the submitting agency. Requirements Two-year certification from college or technical school; or 5 years related experience and/or training; or equivalent combination of education and experience. Ability to manually operate and set up Mitutoyo CMM's. Must know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Must be flexible enough to work in all areas of operation per the direction of the Leadership. A personal and professional background sufficient to secure a Government Security Clearance is required. Advanced knowledge of inspection, plating & coating processes and raw materials a plus. Benefits Granite State Manufacturing offers a comprehensive benefits package to all GSM employees. Health & Wellness Programs Health Insurances (Medical, Dental, & Vision) Flexible Spending Accounts (FSA) Basic & Optional Life Insurance Short & Long Term Disability Employee Assistance Program Voluntary Worksite Benefits 401k Retirement Plan Paid Leave Tuition Reimbursement Workers Compensation …and much more.

Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. Reads and interprets work instructions and to determine dimensions and tolerances. Reads blueprints or specifications to determine dimensions and tolerances. Collates test data and drafts quality reports. May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. May interpret Geometric Dimensioning & Tolerance Strong attention to detail, organization, and documentation skills. May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. Assists in other areas in support of product conformity. Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. Complies with federal and state laws, regulations, specifications and company standards. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Requirements QUALIFICATIONS, SKILLS, AND ABILITIES Two-year certification from college or technical school; or ASQ Certified Quality Technician; or 4 years related experience and/or training; or equivalent combination of education and experience. Experience as an inspector or quality technician. Experience working with quality management systems, should know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Comfortable using Microsoft Office (Excel, Word, Outlook, PowerPoint) or similar software. Preference for experience in aerospace, defense, other regulated manufacturing environments; experience working with NAVSEA is highly desirable. BENEFICIAL SKILL OR EXPERIENCE Advanced skills in Word and Excel. Strong technical writing skills: ability to create or update procedures and work instructions. Experience operating and setting up CMM's and Faro arms beneficial but not required. Advanced knowledge of inspection, plating and coating processes, and raw materials a plus. A personal and professional background sufficient to secure Government Security Clearance. AAP/EEO STATEMENT Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits Paid time off Floating holidays Paid holidays 401(k) 401(k) company matching Dental & Vision insurance (Company paid) Employee assistance program Flexible spending account Competitive health insurance Health savings account Life insurance Referral program

Job Description Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. Reads and interprets work instructions and to determine dimensions and tolerances. Reads blueprints or specifications to determine dimensions and tolerances. Collates test data and drafts quality reports. May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. May interpret Geometric Dimensioning & Tolerance Strong attention to detail, organization, and documentation skills. May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. Assists in other areas in support of product conformity. Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. Complies with federal and state laws, regulations, specifications and company standards. Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations. Requirements QUALIFICATIONS, SKILLS, AND ABILITIES Two-year certification from college or technical school; or ASQ Certified Quality Technician; or 4 years related experience and/or training; or equivalent combination of education and experience. Experience as an inspector or quality technician. Experience working with quality management systems, should know how to interpret Geometric Dimensioning & Tolerance. Must have the ability to work as a team player in a group or team environment and must be able to work independently without supervision. Comfortable using Microsoft Office (Excel, Word, Outlook, PowerPoint) or similar software. Preference for experience in aerospace, defense, other regulated manufacturing environments; experience working with NAVSEA is highly desirable. BENEFICIAL SKILL OR EXPERIENCE Advanced skills in Word and Excel. Strong technical writing skills: ability to create or update procedures and work instructions. Experience operating and setting up CMM's and Faro arms beneficial but not required. Advanced knowledge of inspection, plating and coating processes, and raw materials a plus. A personal and professional background sufficient to secure Government Security Clearance. AAP/EEO STATEMENT Granite State Manufacturing (GSM) is an affirmative action and equal opportunity employer. GSM does not discriminate on the basis of race, color, religion, sex, gender, gender identity or expression, national origin, citizenship, veteran status, age, physical or mental disability, genetic information, marital status, sexual orientation, or any other consideration made unlawful by applicable federal, state, or local laws in its programs, activities, or employment. Benefits Paid time off Floating holidays Paid holidays 401(k) 401(k) company matching Dental & Vision insurance (Company paid) Employee assistance program Flexible spending account Competitive health insurance Health savings account Life insurance Referral program

Supports Quality Assurance and Control activities to ensure products and procedures meet all applicable internal and external requirements. Supports the administration and maintenance of quality systems. Provides support for quality projects dictated by the Quality Leadership. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES * Supports the administration and maintenance of in-process inspection reports, final inspection reports, and First Article inspection Reports compliant with AS9102 using Discus inspection report software. * Maintain calibrated test equipment, ensures equipment is calibrated, validated and maintained properly, maintains the calibration system, prepare test data, and identify areas for improvement. * Reads and interprets work instructions and to determine dimensions and tolerances. * Reads blueprints or specifications to determine dimensions and tolerances. * Collates test data and drafts quality reports. * May interpret test results and compare them to the specifications and control limits in place while providing recommendations on the appropriateness of data. * Supports QMS activities including but not limited to CAPA, Internal Audits, Document Control, Records Management, etc. * Maintain QMS documentation; revise and update documentation, assign training based on documentation changes. * May interpret Geometric Dimensioning & Tolerance * Strong attention to detail, organization, and documentation skills. * May verify specified dimensions of product or raw material using verniers, micrometers, CMM, height gages, comparator, scales or other tools. * Assists in other areas in support of product conformity. * Demonstrates responsibility and accountability for creating a professional, safe, and clean environment evidenced by: being at work on time to perform assigned duties, following the policies of Granite State Manufacturing, always wearing safety glasses in designated areas, maintaining a neat and orderly work area, and following safety practices to prevent errors. * Demonstrates commitment to teamwork by establishing effective relationships and networks with both managers/directors and workers and collaborating with them to accomplish shared purposes and goals. * Complies with federal and state laws, regulations, specifications and company standards. * Abides by GSM Code of Ethics and Business Conduct standards and strictly observes all U.S. and foreign laws and regulations.

Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our associates make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion. Location: Timken, Keene, NH. Job Type: Full time. Shift: Day Shift (1st Shift) Schedule: Monday- Thursday 5:00am-3:00pm, Friday- Overtime day Pay Range: $21.00-26.00 What We Offer Competitive Salary Comprehensive benefits package, including medical, dental and vision coverage. Benefits start on first day of employment. 401(k) retirement savings plan with generous company match. 10 paid holidays per year and paid vacation. Paid parental leave. Employee discounts on products and services. Tuition reimbursement, upon start of employment. Opportunities for professional development and career growth. Purpose/Responsibilities: Review and interpret drawings, process sheets /routings, operating instructions, and specifications. Maintain accurate and complete daily inspection records. Maintain work areas and equipment in neat and orderly manner. Perform inspection utilizing various gages and measuring instruments following established plans to determine conformance to specifications. Process associated documents as required and specified. Perform all tasks as assigned accurately with attention to detail per drawings, specifications, or other operational instructions. This individual may generate and/or handle regulated (i.e. hazardous/non-hazardous) waste as part of this job. This must be disposed of in accordance with federal/state regulations. Technical/Functional Skills: Basic math & computer skills. Some lifting less than 30 pounds. Mostly sitting, sometimes moving or standing. Occasionally working in the machining areas with exposure to machining oils, mist, and coolants. Sitting at microscope / inspection machine for extended periods of time and use of tweezers handling small parts. Requirements: High School diploma or equivalent. 1-5 years manufacturing experience- Preferred Previous experience with GD&T prints- Preferred All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.

Your Career Begins at Timken If you're ready for a challenging career that provides you with the ability to advance personally and professionally, look to Timken. Our associates make the world more productive by improving the efficiency and reliability of the machinery that keeps industry in motion. Location: Timken, Keene, NH. Job Type: Full time. Shift: Day Shift (1st Shift) Schedule: Monday- Thursday 5:00am-3:00pm, Friday- Overtime day Pay Range: $21.00-26.00 What We Offer * Competitive Salary * Comprehensive benefits package, including medical, dental and vision coverage. * Benefits start on first day of employment. * 401(k) retirement savings plan with generous company match. * 10 paid holidays per year and paid vacation. * Paid parental leave. * Employee discounts on products and services. * Tuition reimbursement, upon start of employment. * Opportunities for professional development and career growth. Purpose/Responsibilities: * Review and interpret drawings, process sheets /routings, operating instructions, and specifications. * Maintain accurate and complete daily inspection records. * Maintain work areas and equipment in neat and orderly manner. * Perform inspection utilizing various gages and measuring instruments following established plans to determine conformance to specifications. * Process associated documents as required and specified. * Perform all tasks as assigned accurately with attention to detail per drawings, specifications, or other operational instructions. * This individual may generate and/or handle regulated (i.e. hazardous/non-hazardous) waste as part of this job. This must be disposed of in accordance with federal/state regulations. Technical/Functional Skills: * Basic math & computer skills. * Some lifting less than 30 pounds. * Mostly sitting, sometimes moving or standing. * Occasionally working in the machining areas with exposure to machining oils, mist, and coolants. * Sitting at microscope / inspection machine for extended periods of time and use of tweezers handling small parts. Requirements: * High School diploma or equivalent. * 1-5 years manufacturing experience- Preferred * Previous experience with GD&T prints- Preferred All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law.

Description Join a team of professionals where you will be responsible for performing mechanical inspection of manufactured product and creating those inspection sequences as appropriate. All functions are to be done in accordance with procedures as they related to AS9100 standards and are stated in the TURBOCAM Quality Procedures. Come Build with Us by: Performing the following types of inspections as defined by the job traveler and record on the inspection reports: receipt inspections for customer material and outside services, first article inspections including shroud probes for approval of turning and milling programs, in-process inspections, and final inspections per customer drawings. Identifying, tagging, and segregating all non-conforming parts. Record as appropriate, including in the NCR database, and work with Quality Engineers to disposition parts. Supporting the Quality Engineer in facilitating the flow of parts and paperwork through the mechanical inspection lab. Performing other duties as necessary. Bring Your Expertise: High school diploma or GED equivalent. 2 years of mechanical and/or CMM inspection experience. Intermediate level in MS Office: Outlook, Word, and Excel. Working knowledge of ANSI Y 14.5. Must be attentive to detail. Must maintain adequate near vision by means of annual test (per the requirements of Work Instruction WIQA.05). Our Culture in Action: Here at TURBOCAM, we have a Commitment to Excellence in everything that we do - whether that's the delivery of flow path components and innovative manufacturing solutions, our relationships with customers around the globe, or the investment in those that make TURBOCAM such an exceptional place to work. We make this commitment to you by: Offering a robust benefits package including Medical, Dental, Vision, Life, 401k, Short and Long-Term Disability, Paid Parental Leave, quarterly bonus, and medical opt-out eligibility. Supporting your work-life balance with PTO accrual from day one, complemented by paid holidays and annual volunteer time. Elevating your health and wellbeing through our fitness centers, basketball court, squash court, walking trails, free fitness classes, and visits from our on-site chiropractor. Empowering your creativity in professional growth and educational development, with our state-of-the-art Educational Center with on-site dedicated staff, training and development opportunities, and tuition reimbursement programs. Embracing opportunities to have fun, and enjoy each other's company at our regular luncheons, company celebrations, and events. Advancing our Mission The creation of our Mission has led us to honoring God and supporting Christian service to people, creating wealth for our employees, and committing to integrity in our business and personal relationships. We take ownership of our Mission by supporting charitable organizations, whether that's through donations, fundraising events, or other initiatives. We're more than just a company; we're a community! Learn more about TURBOCAM and our Mission at ***************** All offers of employment are contingent on the satisfactory results of a pre-employment drug screening and background check, both arranged and paid for by TURBOCAM. This position also requires the satisfactory completion of both pre-employment and annual vision exams noting adequate near vision (use of corrective lenses may be acceptable). This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. EOE/Veterans/Disabled

Description Join a team of professionals where you will be responsible for performing mechanical inspection of manufactured product and creating those inspection sequences as appropriate. All functions are to be done in accordance with procedures as they related to AS9100 standards and are stated in the TURBOCAM Quality Procedures. Come Build with Us by: Performing the following types of inspections as defined by the job traveler and record on the inspection reports: receipt inspections for customer material and outside services, first article inspections including shroud probes for approval of turning and milling programs, in-process inspections, and final inspections per customer drawings. Identifying, tagging, and segregating all non-conforming parts. Record as appropriate, including in the NCR database, and work with Quality Engineers to disposition parts. Supporting the Quality Engineer in facilitating the flow of parts and paperwork through the mechanical inspection lab. Performing other duties as necessary. Bring Your Expertise: High school diploma or GED equivalent. 2 years of mechanical and/or CMM inspection experience. Intermediate level in MS Office: Outlook, Word, and Excel. Working knowledge of ANSI Y 14.5. Must be attentive to detail. Must maintain adequate near vision by means of annual test (per the requirements of Work Instruction WIQA.05). Our Culture in Action: Here at TURBOCAM, we have a Commitment to Excellence in everything that we do - whether that's the delivery of flow path components and innovative manufacturing solutions, our relationships with customers around the globe, or the investment in those that make TURBOCAM such an exceptional place to work. Enjoy comprehensive benefits with company-paid dental and life insurance (with optional add-ons for yourself and dependents), short- and long-term disability, subsidized medical (or medical opt-out bonus if covered elsewhere), and voluntary vision coverage. Take time for yourself with Paid Time Off accruing from day one, holidays, paid parental leave, and annual volunteer time. Eligibility for quarterly bonuses of up to 12.5% of gross earnings when targets are met. Grow your future with a 401(k), opportunities for profit-sharing, and skills advancement through our Educational Center, training programs, and tuition reimbursement. Stay active and healthy with on-site fitness centers, basketball/squash courts, walking trails, wellness classes, and chiropractic care. Experience a thriving culture with events, social gatherings, and quarterly catered luncheons. Advancing our Mission The creation of our Mission has led us to honoring God and supporting Christian service to people, creating wealth for our employees, and committing to integrity in our business and personal relationships. We take ownership of our Mission by supporting charitable organizations, whether that's through donations, fundraising events, or other initiatives. We're more than just a company; we're a community! Learn more about TURBOCAM and our Mission at ***************** All offers of employment are contingent on the satisfactory results of a pre-employment drug screening and background check, both arranged and paid for by TURBOCAM. This position also requires the satisfactory completion of both pre-employment and annual vision exams noting adequate near vision (use of corrective lenses may be acceptable). This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. EOE/Veterans/Disabled

STS Aerospace in Laconia, NH is seeking an entry level NDT - FPI Xray Technician to join our team. We fabricate precision welded and brazed tube assemblies for some of the largest aerospace companies in the world including Northrop Grumman, United Technologies, Rolls Royce and Lockheed Martin. Job Description Duties and Responsibilities This position is responsible for the production and interpretation of radiographic images of tube assemblies or castings, for dimensional inspection, flaw detection, or presence of foreign material. * Able to accurately reads and follow X-ray film or digital techniques to produce quality images * Adjusts controls of Liquid Penetrant machines /equipment on console to inspect and certify parts or assemblies. * Follows set radiation safety procedures for personnel and area monitoring * Performs system checks as required * Required to follow procedures in the techniques for which certified * While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk and hear. * The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. * Consistently, regularly and dependably at work and on time. * Other duties may be assigned as needed Qualifications Education, Certifications, Licenses, & Registrations - Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. Additional Information Benefits: * 401(k) matching * Medical, Dental, Vision insurance * Medical Spending Account (HSA & FSA) * Life insurance * Paid time off We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Shift: 2nd Shift, Monday-Friday 3:00-11:00 PM The Quality Technician is a hands-on role based on the production floor, focused on inspecting composite and aircraft parts to ensure they meet safety, regulatory, and customer standards. This position supports in-process and final inspections, utilizes measurement tools, and maintains precise documentation. It plays a vital part in upholding quality and compliance in a fast-paced manufacturing environment. This is not a desk-based engineering position-it involves active floor presence, working closely with operators and reporting to a Quality Supervisor. The role requires strong attention to detail, familiarity with inspection processes, and a commitment to continuous improvement. Job Responsibilities In performing their respective tasks and duties, all employees are expected to adhere to Albany's current values: Albany Wins Together, Count on Each Other, Own Your Actions, Care About Each Other, and Share Your Enthusiasm. Safety must always come first; we never compromise on safety for the sake of achieving another objective. Employees are also responsible for the health and safety of themselves and each other. Put Safety first at all times, never compromise on safety for the obtainment of other objectives. Responsible for health and safety of themselves and coworkers. Conduct in-process and final visual inspections of composite aerospace parts to ensure compliance with specifications and quality standards. Identify and document nonconformances using precision measurement tools and visual inspection criteria. Dimensional measurements using calipers, micrometers, height gages, etc.. Document inspection results by written reports & electronic data entry into database or SAP Some level of analytical ability to assess and implemented quality engineering decisions Support and engage in our AEC Quality System. Continuously improve job knowledge through training and individual work

Shift: 2nd Shift, Monday-Friday 3:00-11:00 PM The Quality Technician is a hands-on role based on the production floor, focused on inspecting composite and aircraft parts to ensure they meet safety, regulatory, and customer standards. This position supports in-process and final inspections, utilizes measurement tools, and maintains precise documentation. It plays a vital part in upholding quality and compliance in a fast-paced manufacturing environment. This is not a desk-based engineering position-it involves active floor presence, working closely with operators and reporting to a Quality Supervisor. The role requires strong attention to detail, familiarity with inspection processes, and a commitment to continuous improvement. Job Responsibilities In performing their respective tasks and duties, all employees are expected to adhere to Albany's current values: Albany Wins Together, Count on Each Other, Own Your Actions, Care About Each Other, and Share Your Enthusiasm. Safety must always come first; we never compromise on safety for the sake of achieving another objective. Employees are also responsible for the health and safety of themselves and each other. * Put Safety first at all times, never compromise on safety for the obtainment of other objectives. Responsible for health and safety of themselves and coworkers. * Conduct in-process and final visual inspections of composite aerospace parts to ensure compliance with specifications and quality standards. * Identify and document nonconformances using precision measurement tools and visual inspection criteria. * Dimensional measurements using calipers, micrometers, height gages, etc.. * Document inspection results by written reports & electronic data entry into database or SAP * Some level of analytical ability to assess and implemented quality engineering decisions * Support and engage in our AEC Quality System. * Continuously improve job knowledge through training and individual work * Position Competencies: * Good mechanical aptitude and use of basic hand and power tools * Basic math skills * Attention to detail * Ability to understand and follow training materials, technical drawings, and work instructions. * Proper use of safety and personal protective equipment. * Basic computer skills (MS Excel, MS Word, SAP) * Ability to communicate in English via written and spoken words * Positive outlook and commitment to the Quality function as a service to all customers and an absolute commitment to Aircraft Safety * Relevant Work Experience: Worked in a manufacturing environment. * Knowledge of QS 9000 & Aerospace AS9100 Quality Systems. Lean Manufacturing /Six Sigma methodology a plus. * High School diploma, GED or equivalent required * Physical demands of the job include stooping, crouching, walking, pulling, light lifting (up to 25 pounds), grasping, hearing, visual acuity, kneeling, reaching, pushing, talking, standing. * All candidates for roles that directly manufacture, or disposition product shall receive eye exams (for color-blindness) and a rudimentary English reading examination prior to receiving a job offer, and annually while employed. * Ability to read and interpret engineering instructions. Position Qualifications (Education, Certifications, Physical) * High School or GED Equivalent Required * 3 years equivalent experience in regulated field preferred * Experience with MS-Word, Excel, Access and Power Point for word processing and documentation support * Must be able to complete multiple prioritized tasks with minimal direct supervision while maintaining focus on preventative activities. * SAP/MRP system experience considered a plus. * Minimum 6 months in current role.