Pipefitter And Foreman jobs at Zachry Construction

An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. MUST HAVE A VALID DRIVERS LICENSE, PASS A DISA BACKGROUND CHECK, A DRUG SCREENING (HAIR FOLICLE) AND MEDICAL SCREENING. MAINTENANCE NO PER DIEM! Qualification Highlights * Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper. * Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. * Must have good leadership and communication skills. * Must have experience on an industrial construction project. Position Responsibilities * Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. * Identify all tools required for tasks. * Identify safety risks and the precautions required to eliminate those risks. * Prepare, fabricate, install, and fit pipe to specifications. * Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. * Perform test to ensure the quality of the pipe and the piping systems. * Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position * This position does not have any direct reports; however, the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. JOB REQUIREMENTS Required Qualifications * Demonstrated industrial construction/maintenance history experience. * Ability to read prints and construction drawings. * Ability to read and interpret technical manuals and manufacturers manuals and instructions. * Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. * Must have 4+ years' experience with the pipe fitting processes. * Good problem-solving abilities. * Good aptitude and manual dexterity. * Good reading comprehension. * Ability to work with others - team player. * Ability to work independently - minimal supervision. * Good communication skills with co-workers and supervisors. * Commitment to Zachry values and safety rules and regulations. Preferred Qualifications * Zachry ROF'ed employee. * Former Zachry Employee. * NCCER Certification as an Industrial Pipe Fitter * Formal/technical education Physical Requirements * Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. * Will talk and hear to communicate. * Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. * Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. * Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. * Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. * Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. MUST HAVE A VALID DRIVERS LICENSE, PASS A DISA BACKGROUND CHECK, A DRUG SCREENING (HAIR FOLICLE) AND MEDICAL SCREENING. MAINTENANCE NO PER DIEM! #LI-KL1

Qualification Highlights Must have 5+ years working as an Industrial Pipefitter. Must have 1+ years of supervisory experience. Must be proficient in managing crew, time, and costs. Must have good leadership and communication skills. Responsibilities Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Illustrate in-depth knowledge of all pipe fitting processes. Tactically plan operations for scheduling workloads in crews efficiently utilizing assets and resources to minimize cost. Manage Crew in regards to processes, scheduling, costs, employee relations issues, and employment needs. Qualifications Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Demonstrate knowledge of the pipe fitting processes for industrial piping and boiler components for a new construction plant. Must have 5+ years' experience with the pipe fitting processes and 1+ years' experience in a supervisory role. Organization and time management. Good problem-solving abilities. Good aptitude and manual dexterity. Demonstrated ability to lead others and provide detailed instructions. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. A commitment to Zachry values and safety rules and regulations. Preferred Qualifications Zachry ROF'ed employee. Former Zachry Employee. Basic Computer efficiency Formal/technical education. Reports to Position This position will be responsible for a crew of up to 5-15 craft workers. The crew will be a mix of journeyman, helpers, and laborers. Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots. ZACHRY is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer.

Qualification Highlights Must have 5+ years working as an Industrial Pipefitter. Must have 1+ years of supervisory experience. Must be proficient in managing crew, time, and costs. Must have good leadership and communication skills. Other duties as assigned. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Illustrate in-depth knowledge of all pipe fitting processes. Tactically plan operations for scheduling workloads in crews efficiently utilizing assets and resources to minimize cost. Manage Crew in regards to processes, scheduling, costs, employee relations issues, and employment needs. Other duties as assigned Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Demonstrate knowledge of the pipe fitting processes for industrial piping and boiler components for a new construction plant. Must have 5+ years' experience with the pipe fitting processes and 1+ years' experience in a supervisory role. Organization and time management. Good problem-solving abilities. Good aptitude and manual dexterity. Demonstrated ability to lead others and provide detailed instructions. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. A commitment to Zachry values and safety rules and regulations. Preferred Qualifications Zachry ROF'ed employee. Former Zachry Employee. Basic Computer efficiency Formal/technical education. Reports to Position This position will be responsible for a crew of up to 5-15 craft workers. The crew will be a mix of journeyman, helpers, and laborers. Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work boots.

Pipe Foreman - El Paso, Texas (Job Number: 483459) The future you want is within reach. At PCL, we build the places where life happens and find camaraderie in the process. We're a community of builders committed to building better communities. That's why we're always looking ahead, and not just to the next project or what's next in our industry. We're also looking at what's next for you and we can help you build a career you're proud of. We are seeking a qualified Pipe Foreman for a project in El Paso, TX 79927. We offer competitive pay, based on experience. As a Pipe Foreman for our Civil District you will contribute to our team by: * Doing layout, set elevations and grading. * Installing of mechanical piping and supports. * Having experience in the installation of carbon steel piping and Victaulic couplings, fittings experience with Copper piping a plus. * Reading /Interpreting: contract documents, submittals, shop drawings, architectural, structural and mechanical drawings * Responsibility for crew and productivity * Able to install different types of pipe material (Ductile, PVC, C-900, sewer) * Follow and enforce HSE requirements * Shoot elevations and grades as needed What you will bring to the role: * Must have minimum of 3 years' experience in the pipe-fitter /mechanical trade * Able to read and understand construction drawings and specifications * Able to create a safe working environment, and understands OSHA regulations * Ability to take off and communicate tool and material requirements to the supervisor * Must have experience in carbon steel, copper (soldering, brazing) and PVC installations * Must have experience setting mechanical equipment including Clarifier equipment, pumps * Ability to set up and perform piping tests * Must have reliable transportation to job-site * Must be self-motivated and have the ability to work well with others * Ability to identify potential issues during installation and elevate them to the Superintendent * Must be able to pass a drug test and a physical. PCL is an innovative, safety-oriented company comprised of people who find passion in their profession and take pride in doing great work everyday. Our work powers the infrastructure and utilities that are essential to daily life and our projects are the scene of vacations, careers, education and healing. We are consistently ranked among the best companies to work for because we are committed to supporting and developing our teams. The PCL Companies celebrate diversity and are proud to be an equal opportunity employer. We are committed to an inclusive environment for all employees and applicants an will make all employment-related decisions without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, age, disability or veteran status. Should you require an accommodation during the application process, please contact us at *************** with the position and location you are interested in. Together, we can build success and a better future. Let's get started! Company: PCL Construction, Inc. Job Posting: Aug 28, 2025 Closing Date: Ongoing Primary Location: United States-Texas-El Paso

***THIS IS MAINTENANCE***NO PER DIEM*** An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. Qualification Highlights Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper. Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. Must have good leadership and communication skills. Must be have experience on an industrial construction project. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Prepare, fabricate, install, and fit pipe to specifications. Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. Perform test to ensure the quality of the pipe and the piping systems. Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position This position does not have any direct reports; however the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. JOB REQUIREMENTS Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. Must have 4+ years experience with the pipe fitting processes. Good problem-solving abilities. Good aptitude and manual dexterity. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. Commitment to Zachry values and safety rules and regulations. Preferred Qualifications Zachry ROF'ed employee. Former Zachry Employee. NCCER Certification as an Industrial Pipe Fitter Formal/technical education Required Tools 1 - Metal Tool Box with Lock 2 - Torpedo Magnetic Level 1 - 25' Tape Measure 1 - 5 Gallon Plastic Bucket 2 - 12" x 24" Framing Square 1 - String Level 1 - 8" Crescent Wrench 1 - 14" Pipe Wrench 1 - 24" Pipe Wrench 1 - Pipefitter's Blue Book 1 - 420 Channel Locks 1 - Torch Lighter (Striker) 1 - Chalk Line 1 - Set of Allen Wrenches 1 - Line Up Bar 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4") 1 - Screwdriver (Flat) 1 - Set of Tip Cleaners 1 - Pair of Leather Gloves 1 - 24" Level 1 - 16' Tape Measure 1 - Pair of Cutting Goggles 1 - Center Finder 1 - 4" Wraparound 1 - 12" Crescent Wrench 1 - 18" Pipe Wrench 1 - Center Punch 1 - Wire Cutters 1 - Plumb Bob 1 - Set Blinding Wedges - Small 1 - Hacksaw 1 - 3lb to 4lb Ball Peen Hammer 1 - Phillips Screwdriver 1 - Combination Set - Tri- Square, Protractor, and Center Finder 1 - 3/8 Ratchet Drive with 3/8" to 1" set 1 - Construction Calculator 1 - Rain Suit 1 - Rubber boots Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer

An Industrial Pipefitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of excess of 300 ft. Qualification Highlights Must have 4+ years working as an Industrial Pipe Fitter Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. Must have good leadership and communication skills. Must have experience on an industrial construction project. Responsibilities Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Prepare, fabricate, install, and fit pipe to specifications. Install valves, hangers, supports, flanges inside piping system according to plans and applicable specifications. Perform test to ensure the quality of the pipe and the piping systems. Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work Boots Qualifications Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Must have 4+ years' of experience in industrial pipefitting. Good problem-solving abilities. Good aptitude and manual dexterity. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. A Commitment to Zachry values and safety rules and regulations. Preferred Qualifications JVIC/Zachry ROF'ed employee. Former Zachry Employee. NCCER Certification as an Industrial Pipe Fitter Formal/technical education Required Tools: list to be provided. JVIC (a ZACHRY Group Company) is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer.

An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems. Qualification Highlights: • Must have 4+ years working as an Industrial Pipe Fitter. • Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. • Must have good leadership and communication skills. • Must have experience in an industrial construction/maintenance project. Position Responsibilities: • Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. • Identify all tools required for tasks. • Identify safety risks and the precautions required to eliminate those risks. • Prepare, fabricate, install, and fit pipe to specifications. • Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. • Perform test to ensure the quality of the pipe and the piping systems. • Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Required Qualifications: • Demonstrated industrial construction/maintenance history experience. • Ability to read prints and construction drawings. • Ability to read and interpret technical manuals and manufacturers manuals and instructions. • Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. • Must have 4+ years' experience with the pipe fitting processes. • Good problem-solving abilities. • Good aptitude and manual dexterity. • Good reading comprehension. • Ability to work with others - team player. • Ability to work independently - minimal supervision. • Good communication skills with co-workers and supervisors. • Commitment to Zachry values and safety rules and regulations. Preferred Qualifications: • Zachry ROF'ed employee. • Former Zachry Employee. • NCCER Certification as an Industrial Pipe Fitter/Boilermaker • Formal/technical education. Reports to Position: • This position does not have any direct reports; however, the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. Required Tools: • 1 - Metal Tool Box with Lock • 2 - Torpedo Magnetic Level • 1 - 25' Tape Measure • 1 - 5 Gallon Plastic Bucket • 2 - 12" x 24" Framing Square • 1 - String Level • 1 - 8" Crescent Wrench • 1 - 14" Pipe Wrench • 1 - 24" Pipe Wrench • 1 - Pipefitter's Blue Book • 1 - 420 Channel Locks • 1 - Torch Lighter (Striker) • 1 - Chalk Line • 1 - Set of Allen Wrenches • 1 - Line Up Bar • 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4") • 1 - Screwdriver (Flat) • 1 - Set of Tip Cleaners • 1 - Pair of Leather Gloves • 1 - 24" Level • 1 - 16' Tape Measure • 1 - Pair of Cutting Goggles • 1 - Center Finder • 1 - 4" Wraparound • 1 - 12" Crescent Wrench • 1 - 18" Pipe Wrench • 1 - Center Punch • 1 - Wire Cutters • 1 - Plumb Bob • 1 - Set Blinding Wedges - Small • 1 - Hacksaw • 1 - 3lb to 4lb Ball Peen Hammer • 1 - Phillips Screwdriver • 1 - Combination Set - Tri- Square, Protractor, and Center Finder • 1 - 3/8 Ratchet Drive with 3/8" to 1" set • 1 - Construction Calculator • 1 - Rain Suit • 1 - Rubber boots Physical Requirements: • Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. • Will talk and hear to communicate. • Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. • Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. • May be required to lift, carry and move up to 50lbs. • Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. • Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. • Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. • Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated to ensure providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. JOB REQUIREMENTS CERTIFICATIONS AND/OR LICENSES REQUIRED * *None OTHER POSITION OR SITE REQUIREMENTS Job Specific Requirements DOES THIS POSITION REQUIRE A COMPUTER? * No BACKGROUND CHECK * Yes REQUIREMENTS MEDICAL * Drug Screen Pre-Employment Physical SAFETY/ORIENTATION/TRAINING * Audio Safety Essentials Pulmonary Function Test/Respiratory Site Specific

**Pipefitter** This person will be able to lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems. Other duties may be assigned. **Specific Duties and Responsibilities:** + Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. + Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment. + Measure and mark pipes for cutting and threading. + Plan pipe system layout, installation, or repair according to specifications. + Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications. + Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools. + Install automatic controls used to regulate pipe systems. + Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches. + Remove and replace worn components. + Inspect work sites for obstructions and to ensure that holes will not cause structural weakness. + Operate motorized pumps to remove water from flooded manholes, basements, or facility floors. + Dip nonferrous piping materials in a mixture of molten tin and lead to obtain a coating that prevents erosion or galvanic and electrolytic action. + Other duties as assigned. + Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position. **Qualifications Required for this Position:** **Education:** - no minimum education requirements. **Certifications/ Licenses:** NCCER, and DL **Experience:** - 3-5 years of Journeyman level experience. **Austin Industrial is an Equal Opportunity Employer.** + _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **No Third-Party Inquiries Please** + This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _e._ , payment must be required pursuant to the terms of a written agreement). **Accessibility Note** + If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Licenses & Certifications** **Required** + NCCER-Ind Pipe PV + Valid Driver's License **Experience** **Required** + 4 years: 4 years of Journeyman level experience. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. MUST HAVE A VALID DRIVERS LICENSE, PASS A DISA BACKGROUND CHECK, A DRUG SCREENING (HAIR FOLICLE) AND MEDICAL SCREENING. MAINTENANCE NO PER DIEM! Qualification Highlights Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper. Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. Must have good leadership and communication skills. Must have experience on an industrial construction project. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Prepare, fabricate, install, and fit pipe to specifications. Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. Perform test to ensure the quality of the pipe and the piping systems. Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position This position does not have any direct reports; however, the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. JOB REQUIREMENTS Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. Must have 4+ years' experience with the pipe fitting processes. Good problem-solving abilities. Good aptitude and manual dexterity. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. Commitment to Zachry values and safety rules and regulations. Preferred Qualifications Zachry ROF'ed employee. Former Zachry Employee. NCCER Certification as an Industrial Pipe Fitter Formal/technical education Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, pull objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. MUST HAVE A VALID DRIVERS LICENSE, PASS A DISA BACKGROUND CHECK, A DRUG SCREENING (HAIR FOLICLE) AND MEDICAL SCREENING. MAINTENANCE NO PER DIEM! #LI-KL1

An Industrial Pipefitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipefitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. Qualification Highlights Must have 4+ years working as an Industrial Pipefitter. Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. Must have good leadership and communication skills. Must have experience on an industrial construction project. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Prepare, fabricate, install, and fit pipe to specifications. Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. Perform test to ensure the quality of the pipe and the piping systems. Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position This position does not have any direct reports; however the position will work closely with and oversee on occasion helper and labor positions. The position will hold a positional and expertise authority over the helper and laborer positions. JOB REQUIREMENTS Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. Must have 4+ years' experience with the pipe fitting processes. Good problem-solving abilities. Good aptitude and manual dexterity. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. Commitment to Zachry values and safety rules and regulations. Preferred Qualifications Zachry ROF'd employee. Former Zachry Employee. NCCER Certification as an Industrial Pipe Fitter Formal/technical education Required Tools 1 - Metal Toolbox with Lock 2 - Torpedo Magnetic Level 1 - 25' Tape Measure 1 - 5 Gallon Plastic Bucket 2 - 12" x 24" Framing Square 1 - String Level 1 - 8" Crescent Wrench 1 - 14" Pipe Wrench 1 - 24" Pipe Wrench 1 - Pipefitter's Blue Book 1 - 420 Channel Locks 1 - Torch Lighter (Striker) 1 - Chalk Line 1 - Set of Allen Wrenches 1 - Line Up Bar 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4") 1 - Screwdriver (Flat) 1 - Set of Tip Cleaners 1 - Pair of Leather Gloves 1 - 24" Level 1 - 16' Tape Measure 1 - Pair of Cutting Goggles 1 - Center Finder 1 - 4" Wraparound 1 - 12" Crescent Wrench 1 - 18" Pipe Wrench 1 - Center Punch 1 - Wire Cutters 1 - Plumb Bob 1 - Set Blinding Wedges - Small 1 - Hacksaw 1 - 3lb to 4lb Ball Peen Hammer 1 - Phillips Screwdriver 1 - Combination Set - Tri- Square, Protractor, and Center Finder 1 - 3/8 Ratchet Drive with 3/8" to 1" set 1 - Construction Calculator 1 - Rain Suit 1 - Rubber boots Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. #LI-AT1

An Industrial Pipefitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of excess of 300 ft. Qualification Highlights Must have 4+ years working as an Industrial Pipe Fitter Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. Must have good leadership and communication skills. Must have experience on an industrial construction project. Responsibilities Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Prepare, fabricate, install, and fit pipe to specifications. Install valves, hangers, supports, flanges inside piping system according to plans and applicable specifications. Perform test to ensure the quality of the pipe and the piping systems. Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting, sitting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to pick up, lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways, and may occasionally work off of platforms/scaffolding using the appropriate fall protection requirements. Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/spoggles, ear plugs, masks/respirators, hi-vis safety vests, leather gloves and leather steel-toed work Boots Qualifications Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Must have 4+ years' of experience in industrial pipefitting. Good problem-solving abilities. Good aptitude and manual dexterity. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. A Commitment to Zachry values and safety rules and regulations. Preferred Qualifications JVIC/Zachry ROF'ed employee. Former Zachry Employee. NCCER Certification as an Industrial Pipe Fitter Formal/technical education Required Tools: list to be provided. JVIC (a ZACHRY Group Company) is dedicated to providing a Safe and Drug-Free work environment and is an Equal Opportunity Employer.

***THIS IS MAINTENANCE***NO PER DIEM*** An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. Qualification Highlights Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper. Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. Must have good leadership and communication skills. Must be have experience on an industrial construction project. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Prepare, fabricate, install, and fit pipe to specifications. Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. Perform test to ensure the quality of the pipe and the piping systems. Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position This position does not have any direct reports; however the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. JOB REQUIREMENTS Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. Must have 4+ years experience with the pipe fitting processes. Good problem-solving abilities. Good aptitude and manual dexterity. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. Commitment to Zachry values and safety rules and regulations. Preferred Qualifications Zachry ROF'ed employee. Former Zachry Employee. NCCER Certification as an Industrial Pipe Fitter Formal/technical education Required Tools 1 - Metal Tool Box with Lock 2 - Torpedo Magnetic Level 1 - 25' Tape Measure 1 - 5 Gallon Plastic Bucket 2 - 12" x 24" Framing Square 1 - String Level 1 - 8" Crescent Wrench 1 - 14" Pipe Wrench 1 - 24" Pipe Wrench 1 - Pipefitter's Blue Book 1 - 420 Channel Locks 1 - Torch Lighter (Striker) 1 - Chalk Line 1 - Set of Allen Wrenches 1 - Line Up Bar 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4") 1 - Screwdriver (Flat) 1 - Set of Tip Cleaners 1 - Pair of Leather Gloves 1 - 24" Level 1 - 16' Tape Measure 1 - Pair of Cutting Goggles 1 - Center Finder 1 - 4" Wraparound 1 - 12" Crescent Wrench 1 - 18" Pipe Wrench 1 - Center Punch 1 - Wire Cutters 1 - Plumb Bob 1 - Set Blinding Wedges - Small 1 - Hacksaw 1 - 3lb to 4lb Ball Peen Hammer 1 - Phillips Screwdriver 1 - Combination Set - Tri- Square, Protractor, and Center Finder 1 - 3/8 Ratchet Drive with 3/8" to 1" set 1 - Construction Calculator 1 - Rain Suit 1 - Rubber boots Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer

***THIS IS MAINTENANCE***NO PER DIEM*** An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft. Qualification Highlights Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper. Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. Must have good leadership and communication skills. Must be have experience on an industrial construction project. Position Responsibilities Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. Identify all tools required for tasks. Identify safety risks and the precautions required to eliminate those risks. Prepare, fabricate, install, and fit pipe to specifications. Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. Perform test to ensure the quality of the pipe and the piping systems. Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Reports to Position This position does not have any direct reports; however the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. JOB REQUIREMENTS Required Qualifications Demonstrated industrial construction/maintenance history experience. Ability to read prints and construction drawings. Ability to read and interpret technical manuals and manufacturers manuals and instructions. Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. Must have 4+ years experience with the pipe fitting processes. Good problem-solving abilities. Good aptitude and manual dexterity. Good reading comprehension. Ability to work with others - team player. Ability to work independently - minimal supervision. Good communication skills with co-workers and supervisors. Commitment to Zachry values and safety rules and regulations. Preferred Qualifications Zachry ROF'ed employee. Former Zachry Employee. NCCER Certification as an Industrial Pipe Fitter Formal/technical education Required Tools 1 - Metal Tool Box with Lock 2 - Torpedo Magnetic Level 1 - 25' Tape Measure 1 - 5 Gallon Plastic Bucket 2 - 12" x 24" Framing Square 1 - String Level 1 - 8" Crescent Wrench 1 - 14" Pipe Wrench 1 - 24" Pipe Wrench 1 - Pipefitter's Blue Book 1 - 420 Channel Locks 1 - Torch Lighter (Striker) 1 - Chalk Line 1 - Set of Allen Wrenches 1 - Line Up Bar 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4") 1 - Screwdriver (Flat) 1 - Set of Tip Cleaners 1 - Pair of Leather Gloves 1 - 24" Level 1 - 16' Tape Measure 1 - Pair of Cutting Goggles 1 - Center Finder 1 - 4" Wraparound 1 - 12" Crescent Wrench 1 - 18" Pipe Wrench 1 - Center Punch 1 - Wire Cutters 1 - Plumb Bob 1 - Set Blinding Wedges - Small 1 - Hacksaw 1 - 3lb to 4lb Ball Peen Hammer 1 - Phillips Screwdriver 1 - Combination Set - Tri- Square, Protractor, and Center Finder 1 - 3/8 Ratchet Drive with 3/8" to 1" set 1 - Construction Calculator 1 - Rain Suit 1 - Rubber boots Physical Requirements Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer

The Shaw Group is looking for an experienced Pipefitter to join our team in a role that primarily operates outdoors. The ideal candidate will have a strong understanding of pipe systems, excellent problem-solving skills, and the ability to work effectively in varying weather conditions. Responsibilities * Installation and Maintenance: Construct, assemble, install, and maintain piping systems according to specifications and codes. * Blueprint Interpretation: Read and interpret blueprints, drawings, and specifications to determine the layout of piping systems. * Material Preparation: Select appropriate materials, such as pipes, fittings, and fixtures, and ensure their proper preparation and assembly. * Welding and Cutting: Perform welding, brazing, soldering, and cutting tasks to connect pipes and related components. * Inspection and Testing: Conduct tests and inspections to ensure systems meet safety and quality standards. * Repair and Troubleshooting: Identify and repair malfunctions in pipelines, such as leaks or blockages, and troubleshoot issues as they arise. * Adherence to Safety Standards: Adhere strictly to safety guidelines and procedures, especially when working in outdoor environments and adverse weather conditions. Education * Proven experience as a Pipefitter, with a focus on outdoor work. * Proficiency in reading and interpreting blueprints and technical drawings. * Knowledge of various piping materials, tools, and techniques. * Strong troubleshooting and problem-solving abilities. * Welding and cutting skills. * Physical stamina to work outdoors in varying weather conditions. * Commitment to safety protocols and guidelines. * Excellent communication and teamwork skills. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

The Shaw Group is looking for an experienced Pipefitter to join our team in a role that primarily operates outdoors. The ideal candidate will have a strong understanding of pipe systems, excellent problem-solving skills, and the ability to work effectively in varying weather conditions. Responsibilities Installation and Maintenance: Construct, assemble, install, and maintain piping systems according to specifications and codes. Blueprint Interpretation: Read and interpret blueprints, drawings, and specifications to determine the layout of piping systems. Material Preparation: Select appropriate materials, such as pipes, fittings, and fixtures, and ensure their proper preparation and assembly. Welding and Cutting: Perform welding, brazing, soldering, and cutting tasks to connect pipes and related components. Inspection and Testing: Conduct tests and inspections to ensure systems meet safety and quality standards. Repair and Troubleshooting: Identify and repair malfunctions in pipelines, such as leaks or blockages, and troubleshoot issues as they arise. Adherence to Safety Standards: Adhere strictly to safety guidelines and procedures, especially when working in outdoor environments and adverse weather conditions. Education Proven experience as a Pipefitter, with a focus on outdoor work. Proficiency in reading and interpreting blueprints and technical drawings. Knowledge of various piping materials, tools, and techniques. Strong troubleshooting and problem-solving abilities. Welding and cutting skills. Physical stamina to work outdoors in varying weather conditions. Commitment to safety protocols and guidelines. Excellent communication and teamwork skills. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Responsible for assembling, layout, installing, and maintaining pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipe Fitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i.e. tanks or boilers. The work may also include working in underground (excavations) areas and working safely at heights of access of 300 ft. Required Qualifications: Pass a REPCON Pipefitter Assessment Pass a REPCON Basic Rigging Assessment, or NCCER certified. Current Basic Orientation Plus (Safety Council card) or within 3 months expiration. Current TWIC Card Have three (3) or more years' experience in your craft. Demonstrated industrial construction/maintenance work history and experience. Fully comprehend and accurately interpret blueprints, construction drawings, technical manuals, and manufacturers' manuals and instructions. Possess applied knowledge on the pipe fitting processes for industrial piping and boilers. Good problem-solving abilities and reading comprehension. Ability to work with others and serve as a team player, while being able to work independently with minimal supervision. Good communication skills (speaking and actively listening) with co-workers and supervisors. Physical Requirements Significant and sustained periods of standing, walking, bending, squatting and lifting. Must have good manual dexterity to perform precision adjustments of machinery parts and controls. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to lift, carry and move up to 50lbs. Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent.

**About Austin Industrial** Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency. **Pipefitter** This person will be able to lay out, assemble, install, and maintain pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems. Other duties may be assigned. **Specific Duties and Responsibilities:** + Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. + Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment. + Measure and mark pipes for cutting and threading. + Plan pipe system layout, installation, or repair according to specifications. + Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications. + Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools. + Install automatic controls used to regulate pipe systems. + Turn valves to shut off steam, water, or other gases or liquids from pipe sections, using valve keys or wrenches. + Remove and replace worn components. + Inspect work sites for obstructions and to ensure that holes will not cause structural weakness. + Operate motorized pumps to remove water from flooded manholes, basements, or facility floors. + Dip nonferrous piping materials in a mixture of molten tin and lead to obtain a coating that prevents erosion or galvanic and electrolytic action. + Other duties as assigned. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Qualifications Required for this Position:** **Education:** - no minimum education requirements. **Certifications/ Licenses:** NCCER, a Valid Driver's License or State ID. **Experience:** - 4 years of Journeyman-level experience. **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems. Qualification Highlights: * Must have 4+ years working as an Industrial Pipe Fitter. * Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills. * Must have good leadership and communication skills. * Must have experience in an industrial construction/maintenance project. Position Responsibilities: * Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required. * Identify all tools required for tasks. * Identify safety risks and the precautions required to eliminate those risks. * Prepare, fabricate, install, and fit pipe to specifications. * Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications. * Perform test to ensure the quality of the pipe and the piping systems. * Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment. Required Qualifications: * Demonstrated industrial construction/maintenance history experience. * Ability to read prints and construction drawings. * Ability to read and interpret technical manuals and manufacturers manuals and instructions. * Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant. * Must have 4+ years' experience with the pipe fitting processes. * Good problem-solving abilities. * Good aptitude and manual dexterity. * Good reading comprehension. * Ability to work with others - team player. * Ability to work independently - minimal supervision. * Good communication skills with co-workers and supervisors. * Commitment to Zachry values and safety rules and regulations. Preferred Qualifications: * Zachry ROF'ed employee. * Former Zachry Employee. * NCCER Certification as an Industrial Pipe Fitter/Boilermaker * Formal/technical education. Reports to Position: * This position does not have any direct reports; however, the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions. Required Tools: * 1 - Metal Tool Box with Lock * 2 - Torpedo Magnetic Level * 1 - 25' Tape Measure * 1 - 5 Gallon Plastic Bucket * 2 - 12" x 24" Framing Square * 1 - String Level * 1 - 8" Crescent Wrench * 1 - 14" Pipe Wrench * 1 - 24" Pipe Wrench * 1 - Pipefitter's Blue Book * 1 - 420 Channel Locks * 1 - Torch Lighter (Striker) * 1 - Chalk Line * 1 - Set of Allen Wrenches * 1 - Line Up Bar * 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4") * 1 - Screwdriver (Flat) * 1 - Set of Tip Cleaners * 1 - Pair of Leather Gloves * 1 - 24" Level * 1 - 16' Tape Measure * 1 - Pair of Cutting Goggles * 1 - Center Finder * 1 - 4" Wraparound * 1 - 12" Crescent Wrench * 1 - 18" Pipe Wrench * 1 - Center Punch * 1 - Wire Cutters * 1 - Plumb Bob * 1 - Set Blinding Wedges - Small * 1 - Hacksaw * 1 - 3lb to 4lb Ball Peen Hammer * 1 - Phillips Screwdriver * 1 - Combination Set - Tri- Square, Protractor, and Center Finder * 1 - 3/8 Ratchet Drive with 3/8" to 1" set * 1 - Construction Calculator * 1 - Rain Suit * 1 - Rubber boots Physical Requirements: * Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. * Will talk and hear to communicate. * Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls. * Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. * Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. * Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. ZACHRY is dedicated to ensure providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer. JOB REQUIREMENTS CERTIFICATIONS AND/OR LICENSES REQUIRED * * None OTHER POSITION OR SITE REQUIREMENTS Job Specific Requirements DOES THIS POSITION REQUIRE A COMPUTER? * No BACKGROUND CHECK * Yes REQUIREMENTS MEDICAL * * Drug Screen * Pre-Employment Physical SAFETY/ORIENTATION/TRAINING * * Audio * Safety Essentials * Pulmonary Function Test/Respiratory * Site Specific

An Industrial Pipefitter will assemble, layout, install and maintain pipe systems on steam, fluid or gas systems. The Pipe systems may include but not limited to: pipe, flanges, supports, valves, gauges, hangars, and angles. Pipefitters may work in all parts of the construction or maintenance site including in buildings, outside, and inside structures, i. e. tanks or boilers. The work may also include working in underground (excavations) areas and working at heights of access of 300 ft.