Process Engineer jobs at Zentech Manufacturing - 700 jobs

This Senior Industrial Engineer/Data Scientist position is designed to support the Austin Business Center at BAE Systems. As a leading member of this team, you will be expected to identify and systematically eliminate waste using classical Industrial Engineering and Lean methods, utilize and build simulation modeling to improve operations, and be required to work on and lead interdisciplinary teams. Individual must be able to format structured approaches to problem solving, communicate effectively with stakeholders and work closely with Supply Chain Planning, Stock room and the Operations teams. You will be responsible for tasks including but not limited to: + Determine the most efficient sequence of operations and workflow. + Establish methods for maximum utilization of facilities and personnel. AutoCAD experience is necessary. + Conduct studies pertaining to cost control, cost reduction and equipment usage + Engage in regular communications and collaboration with the operations managers, planners, logistics, floor operations and operations team to assess operations performance + Design of factory layouts, factory modeling/simulation, and to ensure data aligns with the overall plan and vision for the manufacturing site. + Collaborate with various internal departments that include Program Management, Production Engineering, Quality, Supply Chain, Facilities, Purchasing, Finance, and the Operation team to develop a world class manufacturing facility. + Track projects and reports status to key stakeholders on regular basis. + Develops mitigation plans when issues arise that may jeopardize project timelines + Develop and deploy a framework of continuous improvement utilizing lean principles by performing value-stream analysis simulations. + Reduce waste, rework, and cycle times. + Scientific thought process, systems insight to extract knowledge from a broad chaotic data set. **Required Education, Experience, & Skills** + Ability to understand abstract concepts and based on that understanding calling out anomalies at the right time, before they become giant issues. + Listen in on meetings and be able to connect the dots to create reports to serve the business need at hand from the different data sets available within BAE. + Excellent Project Management skills coupled with a crystal clear understanding of why we do what we do + Possess excellent Data analytical skills and the ability to recognize and utilize data to gain buy in from a diverse group of stakeholders. + Must possess excellent oral and written skills in order to communicate effectively with other teams. + Experience with Automatic Storage and Retrieval Systems preferably Kardex and/or Mycronic and interfaces with middleware and Oracle. + SQL/Python, C, C , any other 4GL and 5GL **Preferred Education, Experience, & Skills** + Experience in Continuous Improvement, Lean Six Sigma, Time Studies, Process Mapping, AutoCAD. + A solid understanding of systems and databases and some query programming skills. **Pay Information** Full-Time Salary Range: $78395 - $133307 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. **Industrial-Process Engineer/Data Analyst** **119211BR** EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

Job Description This Senior Industrial Engineer/Data Scientist position is designed to support the Austin Business Center at BAE Systems. As a leading member of this team, you will be expected to identify and systematically eliminate waste using classical Industrial Engineering and Lean methods, utilize and build simulation modeling to improve operations, and be required to work on and lead interdisciplinary teams. Individual must be able to format structured approaches to problem solving, communicate effectively with stakeholders and work closely with Supply Chain Planning, Stock room and the Operations teams. You will be responsible for tasks including but not limited to: * Determine the most efficient sequence of operations and workflow. * Establish methods for maximum utilization of facilities and personnel. AutoCAD experience is necessary. * Conduct studies pertaining to cost control, cost reduction and equipment usage * Engage in regular communications and collaboration with the operations managers, planners, logistics, floor operations and operations team to assess operations performance * Design of factory layouts, factory modeling/simulation, and to ensure data aligns with the overall plan and vision for the manufacturing site. * Collaborate with various internal departments that include Program Management, Production Engineering, Quality, Supply Chain, Facilities, Purchasing, Finance, and the Operation team to develop a world class manufacturing facility. * Track projects and reports status to key stakeholders on regular basis. * Develops mitigation plans when issues arise that may jeopardize project timelines * Develop and deploy a framework of continuous improvement utilizing lean principles by performing value-stream analysis simulations. * Reduce waste, rework, and cycle times. * Scientific thought process, systems insight to extract knowledge from a broad chaotic data set. Required Education, Experience, & Skills * Ability to understand abstract concepts and based on that understanding calling out anomalies at the right time, before they become giant issues. * Listen in on meetings and be able to connect the dots to create reports to serve the business need at hand from the different data sets available within BAE. * Excellent Project Management skills coupled with a crystal clear understanding of -"why we do what we do" * Possess excellent Data analytical skills and the ability to recognize and utilize data to gain buy in from a diverse group of stakeholders. * Must possess excellent oral and written skills in order to communicate effectively with other teams. * Experience with Automatic Storage and Retrieval Systems preferably Kardex and/or Mycronic and interfaces with middleware and Oracle. * SQL/Python, C, C++, any other 4GL and 5GL Preferred Education, Experience, & Skills * Experience in Continuous Improvement, Lean Six Sigma, Time Studies, Process Mapping, AutoCAD. * A solid understanding of systems and databases and some query programming skills. Pay Information Full-Time Salary Range: $78395 - $133307 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Photronics is Hiring! For more than 50 years, Photronics has been a global leader in photomask technology-powering the innovation behind smartphones, computers, automotive electronics, and the devices people rely on every day. Our success is built on precision, collaboration, and the problem-solving mindset of our people. Join us and help shape the future of semiconductor technology. About the Role The Manufacturing Process Engineer I is an entry-level engineering role that supports the development, optimization, and daily execution of photomask manufacturing processes. Working alongside senior engineers and cross-functional partners across Operations, Quality, IT, and Engineering, you will help ensure our processes run efficiently, consistently, and safely. This is an excellent opportunity for a recent graduate or early-career engineer who is eager to learn, grow, and build technical expertise in a high-tech manufacturing environment. What You'll Do Assist in identifying opportunities to improve process efficiency, quality, and safety Support troubleshooting of process and equipment issues alongside senior engineers Collect, organize, and analyze production or test data to monitor process trends Help maintain and update process documentation, including procedures and work instructions Participate in basic process characterization, validation, and qualification activities Assist with new equipment setups and initial process evaluations Collaborate with operators, technicians, and engineers on daily manufacturing operations Provide basic technical support and share knowledge with production teams Perform additional duties as assigned Travel: Less than 5% What You Bring Knowledge, Skills & Abilities Foundational understanding of engineering or manufacturing principles Strong attention to detail and eagerness to learn new tools and technologies Effective written and verbal communication skills Ability to work independently and collaboratively Commitment to following safety and cleanroom protocols Curiosity, analytical thinking, and a proactive approach to problem-solving Ability to thrive in a fast-paced environment Experience 0-2 years of experience in process engineering, manufacturing, or a related technical field Internship or co-op experience strongly considered Exposure to semiconductor or cleanroom environments is a plus Familiarity with Lean, Six Sigma, or process improvement concepts is helpful but not required Education Bachelor's degree in Chemical Engineering, Materials Science, Mechanical Engineering, Physics, or a related technical field or equivalent work experience. Compensation & Benefits Competitive salary + bonus potential Comprehensive health, dental, and vision insurance 401(k) with company match Generous PTO and paid holidays Career development and training opportunities Collaborative, inclusive workplace culture Equal Opportunity Statement: We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace. We are committed to providing reasonable accommodation for team members' disabilities and religious beliefs or practices. Agency Notice: Photronics does not accept unsolicited resumes or outreach from search firms or employment agencies. Please, no phone calls or emails to any employee regarding this opening. Resumes submitted outside of our approved agency engagement process will be considered the sole property of Photronics, and no fees will be paid if such candidates are hired. Only agencies with a valid agreement in place with Photronics and assigned to this role may submit candidates.

Job Description Photronics is Hiring! For more than 50 years, Photronics has been a global leader in photomask technology-powering the innovation behind smartphones, computers, automotive electronics, and the devices people rely on every day. Our success is built on precision, collaboration, and the problem-solving mindset of our people. Join us and help shape the future of semiconductor technology. About the Role The Manufacturing Process Engineer I is an entry-level engineering role that supports the development, optimization, and daily execution of photomask manufacturing processes. Working alongside senior engineers and cross-functional partners across Operations, Quality, IT, and Engineering, you will help ensure our processes run efficiently, consistently, and safely. This is an excellent opportunity for a recent graduate or early-career engineer who is eager to learn, grow, and build technical expertise in a high-tech manufacturing environment. What You'll Do Assist in identifying opportunities to improve process efficiency, quality, and safety Support troubleshooting of process and equipment issues alongside senior engineers Collect, organize, and analyze production or test data to monitor process trends Help maintain and update process documentation, including procedures and work instructions Participate in basic process characterization, validation, and qualification activities Assist with new equipment setups and initial process evaluations Collaborate with operators, technicians, and engineers on daily manufacturing operations Provide basic technical support and share knowledge with production teams Perform additional duties as assigned Travel: Less than 5% What You Bring Knowledge, Skills & Abilities Foundational understanding of engineering or manufacturing principles Strong attention to detail and eagerness to learn new tools and technologies Effective written and verbal communication skills Ability to work independently and collaboratively Commitment to following safety and cleanroom protocols Curiosity, analytical thinking, and a proactive approach to problem-solving Ability to thrive in a fast-paced environment Experience 0-2 years of experience in process engineering, manufacturing, or a related technical field Internship or co-op experience strongly considered Exposure to semiconductor or cleanroom environments is a plus Familiarity with Lean, Six Sigma, or process improvement concepts is helpful but not required Education Bachelor's degree in Chemical Engineering, Materials Science, Mechanical Engineering, Physics, or a related technical field or equivalent work experience. Compensation & Benefits Competitive salary + bonus potential Comprehensive health, dental, and vision insurance 401(k) with company match Generous PTO and paid holidays Career development and training opportunities Collaborative, inclusive workplace culture Equal Opportunity Statement: We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace. We are committed to providing reasonable accommodation for team members' disabilities and religious beliefs or practices. Agency Notice: Photronics does not accept unsolicited resumes or outreach from search firms or employment agencies. Please, no phone calls or emails to any employee regarding this opening. Resumes submitted outside of our approved agency engagement process will be considered the sole property of Photronics, and no fees will be paid if such candidates are hired. Only agencies with a valid agreement in place with Photronics and assigned to this role may submit candidates.

Photronics is Hiring! For more than 50 years, Photronics has been a global leader in photomask technology-powering the innovation behind smartphones, computers, automotive electronics, and the devices people rely on every day. Our success is built on precision, collaboration, and the problem-solving mindset of our people. Join us and help shape the future of semiconductor technology. About the Role The Manufacturing Process Engineer I is an entry-level engineering role that supports the development, optimization, and daily execution of photomask manufacturing processes. Working alongside senior engineers and cross-functional partners across Operations, Quality, IT, and Engineering, you will help ensure our processes run efficiently, consistently, and safely. This is an excellent opportunity for a recent graduate or early-career engineer who is eager to learn, grow, and build technical expertise in a high-tech manufacturing environment. What You'll Do Assist in identifying opportunities to improve process efficiency, quality, and safety Support troubleshooting of process and equipment issues alongside senior engineers Collect, organize, and analyze production or test data to monitor process trends Help maintain and update process documentation, including procedures and work instructions Participate in basic process characterization, validation, and qualification activities Assist with new equipment setups and initial process evaluations Collaborate with operators, technicians, and engineers on daily manufacturing operations Provide basic technical support and share knowledge with production teams Perform additional duties as assigned Travel: Less than 5% What You Bring Knowledge, Skills & Abilities Foundational understanding of engineering or manufacturing principles Strong attention to detail and eagerness to learn new tools and technologies Effective written and verbal communication skills Ability to work independently and collaboratively Commitment to following safety and cleanroom protocols Curiosity, analytical thinking, and a proactive approach to problem-solving Ability to thrive in a fast-paced environment Experience 0-2 years of experience in process engineering, manufacturing, or a related technical field Internship or co-op experience strongly considered Exposure to semiconductor or cleanroom environments is a plus Familiarity with Lean, Six Sigma, or process improvement concepts is helpful but not required Education Bachelor's degree in Chemical Engineering, Materials Science, Mechanical Engineering, Physics, or a related technical field or equivalent work experience. Compensation & Benefits Competitive salary + bonus potential Comprehensive health, dental, and vision insurance 401(k) with company match Generous PTO and paid holidays Career development and training opportunities Collaborative, inclusive workplace culture Equal Opportunity Statement: We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, or veteran status. We are proud to be an equal opportunity workplace. We are committed to providing reasonable accommodation for team members' disabilities and religious beliefs or practices. Agency Notice: Photronics does not accept unsolicited resumes or outreach from search firms or employment agencies. Please, no phone calls or emails to any employee regarding this opening. Resumes submitted outside of our approved agency engagement process will be considered the sole property of Photronics, and no fees will be paid if such candidates are hired. Only agencies with a valid agreement in place with Photronics and assigned to this role may submit candidates.

Job Title: Process Engineer Structural Foam Full-time | On-site | Manufacturing | Rockwall, TX Were hiring a Process Engineer to support and optimize structural foam manufacturing operations in a hands-on capacity. This isnt a sit-behind-the-desk type of engineering role were looking for someone who knows the floor, understands plastics processing, and can also lead, train, and support process technicians directly. This role will play a key part in improving production processes, troubleshooting issues, and driving continuous improvement while acting as a resource and leader for the foam molding team. What You'll Be Doing: Providing day-to-day technical support for structural foam processes and equipment Leading and mentoring process technicians to improve overall production performance Developing and refining SOPs and best practices to ensure consistency and efficiency Evaluating production capacity and helping with planning for infrastructure needs Collaborating with maintenance, engineering, and production teams on troubleshooting and optimization Monitoring production data, analyzing process performance, and identifying areas for improvement Supporting the implementation of safety procedures, quality standards, and process control systems Assisting in training programs for both new hires and experienced techs on process and equipment What Were Looking For: Strong background in plastics manufacturing, specifically structural foam and blow molding Experience in process engineering within a production environment Hands-on knowledge of setup, troubleshooting, and optimization of molding equipment Ability to lead and train team members while staying involved in the daily production floor activities Familiarity with lean manufacturing principles and continuous improvement initiatives Strong communication skills and a collaborative mindset Comfortable working cross-functionally and balancing both strategic and tactical work Experience with ERP systems (Oracle preferred) and basic data analysis tools 10+ years in manufacturing, with 5+ years of direct experience in process or quality engineering roles Work Environment: On-site in a manufacturing facility with both office and floor time Active role requiring walking, standing, and occasional lifting (up to 50 lbs) Exposure to seasonal temperatures and production noise PPE required in designated areas If you're a process-focused engineer who likes to get your hands dirty, solve problems in real time, and coach others to do the same we'd love to hear from you.

Region: Americas Country: USA State/Province: Texas City: Richardson Functional Area: Engineering Career Stream: Process Engineering Manufacturing SAP Short Name: ENG-ENG-PRM Job Level: Level 07 IC/MGR: Individual Contributor Direct/Indirect Indicator: Indirect Why Celestica? Celestica is changing the future! We are imagining, developing and delivering a better future with our customers. At Celestica, we foster a motivated, high-integrity work environment based on a strong set of corporate Values. These Values empower our employees to provide you with superior service. Relentless Curiosity We are obsessed with uncovering the information and insights that allow us to anticipate and overcome the challenges of the future. Bold Conviction We dare to envision new solutions, new technologies, new ways of working and invest to make it a reality. Unwavering Dedication We exemplify teamwork and commitment in every decision and every action to be the best partners to our customers and our colleagues. Responsibilities The Manufacturing Process Engineer is responsible for designing, developing, deploying and optimizing processes for manufacturing to achieve quality cost and delivery goals for Celestica and its customer's products. Performs tasks such as, but not limited to, the following: Design, develop, and implement new manufacturing processes to support customer products. Develop application software and tooling for a series of complex machines and mechanical process steps within a manufacturing sector. Execute with support, capability of machines and process steps using Design of Experiments and statistical methods to ensure maximum utilization of critical resources, maximum throughput, minimum cost and capacity growth; involves integrating equipment, people, material flow, and information systems. Solve technical product, process, component, and related problems that affect the efficient operation and/or manufacture of products. Provide feedback to product designers on suitability of designs for manufacturability with supervision. Knowledge/Skills/Competencies NPI-PCBA: ESD, Component Prep, Laser making, Solder Paste Deposition/Setencil Design, SMT component placement, Reflow, Tooling design, PTH soldering, PTH manual assembly, Press Fit assembly, Depanelization, Board level mechanical assembly, wire harness assembly, wire prep, SMT data analytics, SMT/PTH manual/automated rework, cleaning processes, coating/potting underfill/ruggedization processes, pack & ship, optical component assembly, fiber / tray handling processes, fiber splicing, IPC-610, quality data (KPI), Engineering Control & System Tools (ODC/SCE), Manufacutring Operational management, DFM -Mfg, DFA, DFR, Customer specific processes, structural test and inspection processes, machining, welding, CNC programming, secondary processes, sheet metal, DFAA DFX: ESD Controls, Component Prep, Component Module Programming, Laser Marking, Screening, Stencil Design, Solder Paste Dispense/Jetting, SMT Programming, SMT Placement, SMT Reflow, Sweat Soldering, Flex Board Assembly/Handling, Pallet Design, PTH Soldering, Robot Soldering, PTH manual Assembly, PTH Auto Assembly, Pressfit, Depanelization, Mechanical Assembly, Wire Harness Assembly, Wire Prep, System Assembly, SMT and PTH Rework, Cleaning Processes, Conformal Coating, Underfills/Edgebonding/Potting, Pack and Ship, Chassis Assembly, Sheet Metal, Machining, Welding, Structural Test (API, AOI, AXI, ICT, Flying Probe) FA LAB: ESD Controls, Solder Metallurgy, Straing Guage Analysis, SIR Testing, Solder Joint Reliability Modeling, Sample Prep (Grind and Polish), Dye & Pry, CMM/VMM, Lab Xray, Pull/Bend Testing, Vibration Testing, Drop Testing, TDR, XRF, SEM, FTIR, IC, Solderability Testing, Thermal Analysis, HALT/HASS, TH&B, Thermal Shock, ATC OPTICAL & XRAY INSPECTION: ESD Controls, Auto Wire Prep, SMT Data Analytics, API, AOI (PCBA), AXI (PCBA), AOI (System), Test Strategy Creation, IPC-610, Quality Dat (KPI), DFM - Manufacturing, DFA-Assembly, DFT/Physcial Test, DFT-Electrical Test MACHINING & OTHER:ESD Controls, Pack & Ship, CNC programming, Secondary Processing, Sheet Metal, Machining, Welding, DFM-Manufacturing MECHANICAL & SYSTEMS ASSEMBLY: ESD Controls, Wire Harness Assembly, Auto Wire Prep, Mechanical Assembly - System Build, OEE / Industrical Engineering, Pack & Ship, Vacuum System, Fluidics, Electrical Encolsure, Cable Routing, Electrical - Automation, Mechanical - Automation, Machine Vision, IPC-610, Engineering Controls, Quality Data (KPI), Manufacturing Operational Management, DFM - Manufacturing, DFA - Assembly, DFAA - Automated Assembly, DFT - Physical Test PCBA ASSEMBLY: ESD, Component Prep, Laser marking, Solder Paste Deposition (screening/jetting)/Stencil Design, SMT component placement, Reflow, Tooling design, PTH soldering, PTH manual assembly, Press Fit assembly, Depanelization, Board level mechanical assembly, wire harness assembly, wire prep, SMT data analytics MICROELECTRONICS: ESD Controls, Wafer thinning, Wafer Singulation, Edge Polishing, Optical Coatings, Die Bonding, Vacuum Reflow, Flip Chip Bonding, Underfill, Active Alignment, Plasma Cleaning, Wire bonding, Encapsulation, Sealing, Leak Testing, Interconnect Formation Typical Experience 1 to 3 years of related experienc;Experience in similar job role Project Management - Ability to manage a single line engineering project with a limited number of participants. Create a project/change management plan, establish and distribute project roles, and communicate what is needed from the project participants in order to make the project successful. Leadership - Demonstrate "Individual Leadership Behaviors" as per Celestica Leadership Imperatives. Financial Acumen / Business Planning -Solid understanding of Celestica's budgeting and accounting system and the cost accounting practices relevant to engineering work. Always act with the awareness of your work's impact on financial results. Communicate clearly and timely all aspects of your work that may have an influence on the profitability of the project and/or what is necessary for proper accounting and controlling. Coaching/Mentoring; Communication/Negotiation/Presentation; Creative Problem Solving; Customer Interaction/Stakeholder Management; Quality & Lean; Working Effectively with Others; D/PFMEA; 8D/Corrective Action; Equipment Safety; Design of Experiments (DOE). Typical Education Bachelor degree or consideration of an equivalent combination of education and experience. Educational Requirements may vary by Geography Physical Demands Duties of this position are performed in a normal office environment. Duties may require extended periods of sitting and sustained visual concentration on a computer monitor or on numbers and other detailed data. Repetitive manual movements (e.g., data entry, using a computer mouse, using a calculator, etc.) are frequently required. Occasional travel may be required. Notes This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. This policy applies to hiring, promotion, discharge, pay, fringe benefits, job training, classification, referral and other aspects of employment and also states that retaliation against a person who files a charge of discrimination, participates in a discrimination proceeding, or otherwise opposes an unlawful employment practice will not be tolerated. All information will be kept confidential according to EEO guidelines. Celestica is an E-Verify employer. COMPANY OVERVIEW: Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

NoCountry: USA State: Texas City: Richardson Celestica is seeking a Manufacturing Process Engineer to join our growing team. The ideal candidate will have 2-5 years of experience in process development within a manufacturing environment. This role will primarily focus on supporting, optimizing, and documenting assembly processes for complex electronic systems, including key areas like liquid cooling integration and data center rack assembly (L10+). The Manufacturing Process Engineer will be essential in driving quality and efficiency on the production floor. Key Responsibilities Performs tasks such as, but not limited to, the following: Process Documentation: Develop and maintain detailed manufacturing work instructions, process specifications, and visual aids for assigned product lines, ensuring all documents are current and adhere to quality standards. Process Optimization & Analysis: Execute with support, capability of machines and process steps using Design of Experiments (DOE) and statistical methods to ensure maximum utilization of critical resources, maximum throughput, minimum cost, and capacity growth; involves integrating equipment, people, material flow, and information systems. Technical Support: Provide direct support to the production line, quickly resolving technical issues, troubleshooting equipment malfunctions, and addressing material variances to minimize line downtime. NPI Implementation: Work closely with Lead Engineers to execute the transfer of new products (NPI) into the manufacturing environment, setting up initial line layouts, verifying fixtures, and validating process steps. Liquid Cooling Focus: Support the specialized assembly and testing processes for liquid cooling components and rack integration. This includes monitoring cold plate mounting, leak detection, and system functional testing. Quality Improvement: Participate in failure analysis activities (e.g., 8D reports, root cause analysis) to identify and correct process-related defects and drive continuous improvement on the production floor. Tooling & Fixturing: Design and procure basic fixtures and tooling using CAD software to improve operator ergonomics, ensure process repeatability, and prevent manufacturing defects. Training: Train and certify production operators and technicians on new or modified processes and equipment operation to ensure consistency and compliance. Required Experience & Qualifications 2 to 5 years of direct experience as a Process, Manufacturing, or Industrial Engineer in the electronics industry or experience with complex system assembly. Foundational knowledge of high-level system integration. Exposure to manufacturing processes involving liquid cooling or data center rack assembly is strongly preferred. Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Electrical Engineering, or a related technical field. Proficiency in CAD software (for basic fixturing/tooling design). Experience applying basic Six Sigma or Lean tools (e.g., 5S, value stream mapping) to a manufacturing environment. Familiarity with statistical analysis software is a plus. Solid understanding of electronic assembly processes and quality methodologies (e.g., control plans, SPC). Strong analytical and problem-solving skills. Excellent communication skills and the ability to work effectively with cross-functional teams (Production, Quality, Design). Physical Demands & Work Environment Work Environment: The role involves a split between office/desk work and substantial time spent on the production floor. Physical Demands: Requires walking, standing, bending, and the ability to work directly with machinery and assembly stations. Must be able to wear required personal protective equipment (PPE). Travel: Minimal travel (less than 5%) may be required for training or occasional supplier visits. Typical Education Bachelor degree or consideration of an equivalent combination of education and experience. Educational Requirements may vary by Geography Notes This job description is not intended to be an exhaustive list of all duties and responsibilities of the position. Employees are held accountable for all duties of the job. Job duties and the % of time identified for any function are subject to change at any time. Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law). At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them. COMPANY OVERVIEW: Celestica (NYSE, TSX: CLS) enables the world's best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development - from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud. Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers. Celestica would like to thank all applicants, however, only qualified applicants will be contacted. Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

About Prime Introducing Prime Controls Established in 1997, Prime Controls is a family-owned Systems Integration and I&C Construction firm dedicated to meeting clients' industrial automation and control requirements. As a Main Automation Contractor, we offer comprehensive solutions, supported by our size, expertise, and extensive experience. With a professional team of over 900 employees, Prime Controls serves customers nationwide from our Dallas, Texas headquarters and offices throughout the South-Central United States. Our mission is to deliver the highest quality professional services while prioritizing our employees' well-being and fostering an exceptional workplace environment. Overview What You Will Do The Process Engineer is responsible for analyzing, designing, and optimizing manufacturing or business processes to improve efficiency, quality, and cost-effectiveness. This role involves working closely with cross-functional teams to enhance production workflows, troubleshoot issues, and implement continuous improvement initiatives using Lean, Six Sigma, and other methodologies. A Typical Day at Prime Controls Design, evaluate, and improve manufacturing or operational processes to enhance efficiency and reduce waste. Develop and implement process control strategies to ensure consistency in production. Analyze process data to identify inefficiencies and recommend solutions. Work with cross-functional teams (production, quality, maintenance, R&D) to troubleshoot process issues. Optimize workflow layouts, equipment utilization, and resource allocation. Implement Lean Manufacturing and automation technologies to improve productivity. Conduct root cause analysis for process failures and develop corrective actions. Ensure compliance with safety, environmental, and quality standards. Work closely with the safety team to ensure compliance. Support new product introductions (NPI) by developing and refining production processes. Train operators and production staff on new or updated processes. What You Will Bring The Basic Education: Bachelor's degree in Mechanical Engineering, Industrial Engineering, or a related field (or related experience). Experience: 2-5+ years in process engineering, manufacturing, or industrial operations. Technical Skills: Proficiency in process modeling and simulation tools (AutoCAD). Knowledge of ERP/MRP systems and production planning. Strong understanding of Lean, and continuous improvement methodologies. Experience with automation, robotics, and Industry 4.0 technologies is a plus. Strong analytical and problem-solving abilities. Excellent communication and teamwork skills. Ability to manage multiple projects in a fast-paced environment. Detail-oriented with strong organizational skills. Primarily works in a manufacturing or industrial facility. Will require hands-on work on the production floor and occasional office tasks. Requires flexibility to work shifts, weekends, or overtime based on production demands. The Preferred Certifications: Six Sigma (Green or Black Belt), Lean Manufacturing, PMP. Industry Experience: Automotive, aerospace, electronics, contract manufacturing, or heavy manufacturing. Experience with process validation, statistical process control (SPC), and DOE (Design of Experiments). Benefits What We Offer: Full-time employees enjoy a great benefits package including, but not limited to: Health, Dental, and Vision coverage Flexible Spending Account(s) Generous PTO Numerous company events Employee Stock Ownership Plan 401k matching and more! Work Environment & Physical Demands (Text Only) Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations for individuals with disabilities may be made to enable them to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations for individuals with disabilities may be made to enable them to perform the essential functions. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision and distance vision. While performing the duties of this job, the employee is frequently required to stand and talk or hear. The employee is occasionally required to walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. EEO Prime Controls is an Equal Opportunity Employer/Affirmative Action/Veteran/Disabled employer. As a federal contractor, Prime Controls is required to participate in the federal government's E-Verify program, which confirms employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security. For new hires, the E-Verify process is completed in conjunction with the Form I-9 Employment Eligibility Verification on or before the first day of work. E-Verify is not used as a tool to pre-screen candidates.

it's what's inside that counts _______________________________ There's more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it's the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: * Day 1 Benefits Coverage with low cost Medical, Vision, Dental * Day 1 Paid-time Off and Vacation * 4.5% Company Match 401(k) plan * $500 Annual Company-paid Lifestyle Benefit * Competitive Compensation and Bonuses * Company-paid Life and Disability Insurance * Employee Stock Purchase Plan * Training and Advancement Opportunities Why This Job CMC provides an excellent opportunity to learn the steel, construction reinforcement and ground stabilization industries and to grow in your career. Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and support from your team that you need to excel in your role and reach your full potential. What You'll Do * Work in various roles within operations team to learn equipment, processes and procedures from start to finish. * Monitor and analyze Melt Shop processes to identify opportunities for improvement in productivity, cost, and quality * Develop and implement process control strategies for steel melting and refining operations * Collaborate with operations and maintenance teams to troubleshoot equipment and process issues * Ensure compliance with safety, environmental, and operational standards * Prepare technical reports and maintain accurate process documentation * Support capital projects and process upgrades * Train and mentor operators on process improvements and best practices * Participate in root cause analysis for process deviations and implement corrective actions What You'll Need * 2+ years experience working with the Melt Shop process * Experienced with data softwares such as Power BI, SQL, and Python * Experience with Automation Design * SAP experience strongly preferred * Critical thinking, strong analytical and problem solving skills and attention to detail * Proficient in MS Office programs - Outlook, Word, Excel, Power point, and Microsoft Project * Shows a safety-first mindset; recommends improvements to make the workplace safer for self and others * Demonstrates dependability in attendance, work completion, and flexibility to meet business needs * Must be willing to learn and tackle new challenges * Is organized and shows attention to detail, with a "get it right the first time" mindset Your Education * Bachelor's Degree in Meteallurgical Engineering, Materials Science, Mechanical Engineering, Industrial Engineering, or related field We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years - and we're just getting started. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC. Apply today and start moving your career - and our world - forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. From Fortune Magazine. 2025 Fortune Media IP Limited. All rights reserved. Used under license. Current Employee? Click Here to Apply. Current Employees Apply Click here to apply. Nearest Major Market: San Antonio

The Process Engineer is responsible for erection, commissioning and start\-up of SCR Projects as required. This individual must be familiar with all major subsystems of copper and aluminum rod mills sold to Southwire's customers. Responsibilities include supervision of others, site project management, planning, scheduling, budget conformity, coordination with customer and sub\-suppliers, erection and start\-up supervision. Duties and Responsibilities: Supervises installation and start\-up of SCR systems. Performs as a site engineer, engineering coordinator and start\-up engineer for systems. Develops new equipment and techniques including selection and evaluation of hardware and software. Transfers operating know how to SCR customers by training, publications, discussions, presentations and other forms of communication. This individual, because of vast experience with SCR, is often called upon to train new employees about the SCR process. Make suggestions on how to improve SCR equipment and processes. Answer the many and varied technical questions posed by our existing and prospective SCR customers and new employees. Produce daily progress reports during startups and field service visits. Write trip reports after customer visits. Skills: Ability to communicate design information from various documents such as vendor and SCR drawings, operating manuals and maintenance\/operation manuals. Ability to focus efforts towards successful completion of the project. Because of the large variety of tasks required and personalities encountered, this individual must be very flexible and adaptable to rapidly changing requirements. Ability to use AutoCad is not required but ability to learn to use this software is desired. Requirements Must\-Haves: Minimum of 8 Years of process Engineering or Operations Management of Industrial processing systems, Preferred experience with Combustion Management systems operation Would like them to have experience with Molten metal processing systems This is a very hands on Process Engineer position International travel will be required up to 50% of the time. Educational Development: Knowledge of mechanical or chemical engineering and process engineering as obtained through a Bachelor of Science degree in industrial, electrical, mechanical or chemical engineering. Fluent in one of the following languages is not required but is a desirable attribute: Hindi, Chinese, Arabic or Russian. Physical, Mental and Visual Effort: International travel is required, up to 50%, for several weeks duration at a time. The Process Engineer must have tenacity and an ability to work with a diverse group of international customers. Supervision: This individual requires minimum supervision to accomplish the wide variety of tasks required. Report: Required to manage heavy project documentation and write procedures and manuals. Must have an ability to recall, locate, summarize, and communicate answers to questions posed by SCR customers. Flexibility: Because of the large variety of different tasks required, this individual must be very flexible and adaptable to rapidly changing requirements. Planning: Project erection\/commissioning planning Benefits Medical Insurance Vision Insurance Retirement Equity Dental Insurance Paid Time Off Partial Realocation Package Life Insurance "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"658467739","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Engineering"},{"field Label":"Work Experience","uitype":2,"value":"4\-5 years"},{"field Label":"City","uitype":1,"value":"Carrollton"},{"field Label":"State\/Province","uitype":1,"value":"Georgia"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"30119"}],"header Name":"Process Engineer III","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00187003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"**********84012037","FontSize":"12","google IndexUrl":"https:\/\/offshore\-staffing.zohorecruit.com\/recruit\/ViewJob.na?digest=O71L8WLooPFRCwliXuYqtCjrYsQHFlPqMFdq.y39i6c\-&embedsource=Google","location":"Carrollton","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

The Process Engineer is responsible for providing hands-on process improvements in our secure Bolingbrook facility Monday - Friday 4:00pm - 11:00pm using a combination of Engineering and Lean skill sets to support our key performance indicators of Safety, Quality, Delivery, Cost and Innovation. Responsible for the technical components of quality in card manufacturing and services. Plans, directs and carries out work flow design and R&D assignments. Key Responsibilities: * Drive the advancement of manufacturing operational processes and material replenishment systems to meet client pull demands. * Optimize systems, flow creation, equipment performance and resources. Lead the tactical efforts towards the achievement of the strategic plan objectives. * Drive the promotion and facilitation of Lean Engineering events supporting the entire value chain. This position will focus on key cross functional process and system improvements allowing us to accelerate the standardization, stability, and simplification in the manufacturing and key client facing business processes. * Develop, enhance, and implement systems that increase efficiency and optimize all phases of service or production processes, from design to manufacturing. * Oversee, and directly participate in, process design projects, and ensure the efficient and safe functioning of all the processes related to producing a product, substance, or service. * Conduct problem solving exercises, including root cause analysis, corrective action, and preventive action implementation for plant operations. Utilizing the following: * Visual Management systems * Sustainment of 5S * Set Up Reduction - SMED methodologies * Waste Reduction * Optimizing Inventory Control/Kanban System * Line Balancing and Flow Creation * Gemba utilization, including leading huddles * Evaluate existing processes, suggest measures for improvement, and configure manufacturing systems to reduce cost, improve sustainability, boost productivity, quality, and profitability, and develop best practices within the production process. * Implement methods and process designs, create prototypes, conduct testing, and make necessary modifications where required. * Consult with suppliers and vendors and make recommendations relating to materials used in the manufacturing process. * Analyze facility layout, equipment requirements and work flow, and develop plant layouts for improvement of workflow, security and safety. * Oversee installation and start-up of new equipment and processes. * Provide technical input to production and clients. * Develop programs and processes to improve the performance of cards manufactured. * Perform other related duties as assigned. Qualifications: * Bachelor's degree in an Engineering discipline and/or a combination of college education * Minimum of 5 years' experience in manufacturing, process engineering, or quality engineering. * Process/Manufacturing Engineering experience in an industrial environment. * Must have proven team leadership / facilitation skill sets. * Practitioner of Six Sigma concepts (or Six Sigma certifications) * Computer proficiency and experience with general engineering software solutions. * Effective written and verbal communication skills. * Strong practical skills within a Lean manufacturing environment is highly desirable. * Experience with various manufacturing process technologies. * Working knowledge of manufacturing equipment and systems. * Lives the Continuous Improvement culture and can drive change. * Passionate about Lean and the attainment of key initiatives. * Strong data driven process and system methodologies. * Ability to hold self and others accountable. * Enjoys plant level, hands-on involvement in the improvement process. Job Duties: * Utilize expertise in current product knowledge to enhance production methods, aiding the company in meeting budgetary objectives and performance targets. * Employ knowledge of new products to implement production methods and equipment that align with customer requirements. * Develop innovative solutions to existing manufacturing challenges. * Evaluate manufacturing processes through the design and execution of test programs, drawing on insights from product design, materials, assembly, and equipment, and consulting with equipment vendors and relevant stakeholders. * Assist management in decision-making by calculating production, labor, and material costs, reviewing production and new product schedules, and estimating future equipment and tool requirements. * Coordinate the manufacturing launch of new or revised products, materials, and equipment, ensuring key variables are measured and controlled, providing communication and training to team members, and evaluating results until targets are consistently met. * Conduct product and process analysis to drive cost reduction, quality enhancement, and efficiency improvement. * Develop specifications and execute test plans for equipment purchases, collaborating with suppliers to ensure adherence to specifications. * Collaborate with Production, Quality, and R&D teams to ensure timely delivery of new products and equipment that meet customer requirements. * Assist in providing process documentation, operating instructions, and overall hand-off actions to key stakeholders for new or revised processes or production equipment. * Perform additional tasks as assigned. Job Specifications: * Work performed in a light industrial setting * Required to lift up to 40 lbs. * Regularly required to sit, stand and walk about the facility * Ability to distinguish color variations * Able to use various measuring devices * Must be able to work assigned overtime as needed * Must be able to travel domestically and internationally as needed The pay range for this position is $82,000 - $88,000 per year and is eligible for an annual bonus. Benefits offered to eligible employees include, medical (PPO and HDHP with HSA), dental, vision, paid time off, paid holidays, 401K w/ employer match, short/long term disability, life insurance, healthcare and dependent care flexible spending, EAP, commuter benefits, education assistance, pet insurance, legal, and more.

The Process Engineer is responsible for providing hands-on process improvements using a combination of Engineering and Lean skill sets to support our key performance indicators of Safety, Quality, Delivery, Cost and Innovation. Responsible for the technical components of quality in card manufacturing and services. Plans, directs and carries out work flow design and R&D assignments. Key Responsibilities: * Drive the advancement of manufacturing operational processes and material replenishment systems to meet client pull demands. * Optimize systems, flow creation, equipment performance and resources. Lead the tactical efforts towards the achievement of the strategic plan objectives. * Drive the promotion and facilitation of Lean Engineering events supporting the entire value chain. This position will focus on key cross functional process and system improvements allowing us to accelerate the standardization, stability, and simplification in the manufacturing and key client facing business processes. * Develop, enhance, and implement systems that increase efficiency and optimize all phases of service or production processes, from design to manufacturing. * Oversee, and directly participate in, process design projects, and ensure the efficient and safe functioning of all the processes related to producing a product, substance, or service. * Conduct problem solving exercises, including root cause analysis, corrective action, and preventive action implementation for plant operations. Utilizing the following: * Visual Management systems * Sustainment of 5S * Set Up Reduction - SMED methodologies * Waste Reduction * Optimizing Inventory Control/Kanban System * Line Balancing and Flow Creation * Gemba utilization, including leading huddles * Evaluate existing processes, suggest measures for improvement, and configure manufacturing systems to reduce cost, improve sustainability, boost productivity, quality, and profitability, and develop best practices within the production process. * Implement methods and process designs, create prototypes, conduct testing, and make necessary modifications where required. * Consult with suppliers and vendors and make recommendations relating to materials used in the manufacturing process. * Analyze facility layout, equipment requirements and work flow, and develop plant layouts for improvement of workflow, security and safety. * Oversee installation and start-up of new equipment and processes. * Provide technical input to production and clients. * Develop programs and processes to improve the performance of cards manufactured. * Perform other related duties as assigned. Qualifications: * Bachelor's degree in an Engineering discipline and/or a combination of college education * Minimum of 5 years' experience in manufacturing, process engineering, or quality engineering. * Process/Manufacturing Engineering experience in an industrial environment. * Must have proven team leadership / facilitation skill sets. * Practitioner of Six Sigma concepts (or Six Sigma certifications) * Computer proficiency and experience with general engineering software solutions. * Effective written and verbal communication skills. * Strong practical skills within a Lean manufacturing environment is highly desirable. * Experience with various manufacturing process technologies. * Working knowledge of manufacturing equipment and systems. * Lives the Continuous Improvement culture and can drive change. * Passionate about Lean and the attainment of key initiatives. * Strong data driven process and system methodologies. * Ability to hold self and others accountable. * Enjoys plant level, hands-on involvement in the improvement process. The pay range for this position is $82,000 - $88,000 per year and is eligible for an annual bonus. Benefits offered to eligible employees include, medical (PPO and HDHP with HSA), dental, vision, paid time off, paid holidays, 401K w/ employer match, short/long term disability, life insurance, healthcare and dependent care flexible spending, EAP, commuter benefits, education assistance, pet insurance, legal, and more.

Full-time Description Company: TD*X Associates LP TD*X Associates is a technology development firm that designs, builds, and operates the most advanced thermal desorption units (TDUs) in the world. Our facilities are used to solve complex waste management and material recycling challenges for our clients and are positioned to expand the application of thermal desorption to higher value material recovery and emerging waste streams. Position Description: This is a shift position that provides engineering and troubleshooting support for the operation, maintenance, regulatory compliance, data management and optimization for various Thermal Desorption, hazardous waste treatment/recycling processes and equipment. The ideal candidate will be safety conscious, attentive, hardworking, self-motivated and mechanically competent. Must have a desire to work as part of an integrated team with a hands-on approach to a technical position that can require compensated overtime work. Key Responsibilities: As a member of an integrated team, the Thermal Unit Process Engineer responsibilities include: Monitor and optimize operations of different processes Collect and review daily production data. Evaluate data and process deviations Recommend and design changes or upgrades to equipment and operating procedures. Assist with diagnostics and repair of process equipment Support our technology by being part of operations Other tasks and/or responsibilities as directed by your supervisor Working Environment Our facility is located outside where heat and cold are the normal work environment conditions and operates 24 hours per day and 7 days per week. The equipment includes hot surfaces, pressurized piping, confined spaces, rotating motors, conveyors, and moving heavy equipment. Personal protective equipment required include steel toed boots, coveralls, safety glasses, hard hat, hearing protection and gloves. Working Hours A rotating shift schedule will require working days, nights, weekends and some scheduled holidays The schedule results in an average of approximately 50 hours per week, with straight time paid over 160 hours /4 weeks Benefits 100% paid medical insurance for employee and family Paid vacation Eight (8) paid holidays 401K with up to 4% matching company contribution Company paid Short- and Long-Term disability insurance Company paid Life Insurance equal to annual salary Excellent opportunity for growth because TD*X Associates is a company that promotes within! Requirements Desired Experience 1-3 years of previous employment in an industrial setting. i.e., oil field, refinery, chemical manufacturing or similar Knowledge of hazardous materials operations Understanding of confined space entries Comfortable using basic hand tools, gauges, meters, and power tools Good physical fitness is helpful for the active work performed on our processing plants Aspires to build a career and grow professionally Required Capabilities 4-year engineering degree Ability to climb stairs and ladders Ability to follow instructions and communicate clearly Self-motivated Responsible Team attitude Salary Description Starts at $85,000.00 - $89,000.00/year

Forming Our Future together FormFactor, Inc. (NASDAQ: FORM), is a leading provider of essential test and measurement technologies along the full semiconductor product life cycle - from characterization, modeling, reliability, and design de-bug, to qualification and production test. Semiconductor companies rely upon FormFactor's products and services to accelerate profitability by optimizing device performance and advancing yield knowledge. The company serves customers through its network of facilities in Asia, Europe, and North America. Rooted in our core values - Focus on the Customer, Ownership & Accountability, Respectfully & Effectively Communicate, and Motivate & Develop People - we foster an environment where diverse perspectives are not only welcomed but celebrated. Everyone can make an impact here. Whether it's improving products, supporting customers, or positively influencing peers and the community, the contributions of our people matter. Shift: The regular hours for this position are day shift. Job Description: The Process Engineer - Integration Level 4 will define integration flows, resolve cross-module issues, and drive yield improvements across the fab and be responsible for process integration in a high-volume semiconductor manufacturing environment. Key Responsibilities: * Process Integration Ownership: Leads and defines integration strategy with minimal oversight setting technical direction and standardizing best practices. Act as the technical interface between unit process engineers and device integration teams to ensure process modules meet overall device performance and yield targets. * Technology Transfer: Lead the transfer of process technologies from R&D or pilot lines to high-volume manufacturing, ensuring scalability, repeatability, and manufacturability. * Cross-functional Collaboration: Influences fab-wide process flows and long-term technology roadmap. Work closely with design, process, equipment, and yield engineering teams to align process flows with product requirements. * Process Flow Definition & Optimization: Develop and refine integrated process flows to meet electrical, physical, and reliability specifications. * Root Cause Analysis: Investigate yield excursions and device failures using systematic problem-solving tools (e.g., 8D, DMAIC). * Data Analysis & Reporting: Analyze electrical test data, inline metrology, and defect data to identify integration issues and drive corrective actions. * Design of Experiments (DOE): Plan and execute DOEs to optimize integrated process performance and resolve complex interactions between process steps. * Documentation & Specifications: Maintain detailed documentation of process flows, integration strategies, and transfer protocols. * Process Qualification: Support qualification of new processes and materials, ensuring they meet reliability and performance standards. * Change Management: Evaluate and implement process changes with minimal impact to production, ensuring robust change control and risk mitigation. * Yield Improvement: Drive continuous improvement initiatives focused on yield enhancement and defect reduction across the full process flow. * Leadership & Mentorship: Influences, leaders projects and mentors others across departments. Farmers Branch, TX - On-Site Benefits offered for this role include medical, dental, vision, EAP, short-term and long-term disability, life insurance, flexible spending and savings accounts, 401(k), ESPP and paid time off. Skills: Analytical Problem Solving, Communication, Cross-Functional Teamwork, Documentations, Electrochemical Processes, Inspection Systems, Manufacturing Execution Systems (MES), Metrology, Process Control Software, Python (Programming Language), Six Sigma, Structured Query Language (SQL), Thin Films Deposition, Working Independently Education & Experience: Minimum of 8 years of related experience with a Bachelor's degree; or 6 years and a Master's degree; or a PhD with 3 years experience; or equivalent experience | Required Equal Employment Opportunity Statement FormFactor is an equal opportunity employer. FormFactor complies with all national, state, and local laws that seek to promote equal opportunities for any applicant or employee without regard to age, race, color, gender, gender identity/expression, national origin, sexual orientation, religion, disability, marital status, pregnancy or related condition, military service, or any other legally protected characteristics. These protections apply to all aspects of employment, including but not limited to, recruitment, hiring, training, promotions, and compensation.

Established in 1991, Collabera is one of the fastest growing end-to-end information technology services and solutions companies globally. As a half a billion dollar IT company, Collabera's client-centric business model, commitment to service excellence and Global Delivery Model enables its global 2000 and leading mid-market clients to deliver successfully in an increasingly competitive marketplace. With over 8200 IT professionals globally, Collabera provides value-added onsite, offsite and offshore technology services and solutions to premier corporations. Over the past few years, Collabera has been awarded numerous accolades and Industry recognitions including. • Collabera awarded Best Staffing Company to work for in 2012 by SIA. (hyperlink here) • Collabera listed in GS 100 - recognized for excellence and maturity • Collabera named among the Top 500 Diversity Owned Businesses • Collabera listed in GS 100 & ranked among top 10 service providers • Collabera was ranked: • 32 in the Top 100 Large Businesses in the U.S • 18 in Top 500 Diversity Owned Businesses in the U.S • 3 in the Top 100 Diversity Owned Businesses in New Jersey • 3 in the Top 100 Privately-held Businesses in New Jersey • 66th on FinTech 100 • 35th among top private companies in New Jersey *********************************************** Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description Responsibilities Include: • Provide technical expertise and apply advanced scientific knowledge and product design best practices to projects; determine design requirements and contribute to verification and validation plans including execution. • Responsible for timely project completion. • Participate in project planning, design reviews and risk assessments using formal risk analysis methodologies. • Evaluate and integrate relevant engineering advances for improving or solving problems • Understand the business implications of assigned products and processes and identifies engineering solutions compatible with business needs. • Apply advanced technical writing skills to produce reports and documents; writes independently and evaluates the writing of others. • Present results of projects. Qualifications Possesses educational qualifications and work experience as established by engineering schools, employers and licensing authorities for employment in the various disciplines of engineering, i.e. Mechanical, Electrical, Industrial, Manufacturing, Chemical etc. Experience level: 5-7 years. Additional Information All your information will be kept confidential according to EEO guidelines.

Established in 1991, Collabera is one of the fastest growing end-to-end information technology services and solutions companies globally. As a half a billion dollar IT company, Collabera's client-centric business model, commitment to service excellence and Global Delivery Model enables its global 2000 and leading mid-market clients to deliver successfully in an increasingly competitive marketplace. With over 8200 IT professionals globally, Collabera provides value-added onsite, offsite and offshore technology services and solutions to premier corporations. Over the past few years, Collabera has been awarded numerous accolades and Industry recognitions including. • Collabera awarded Best Staffing Company to work for in 2012 by SIA. (hyperlink here) • Collabera listed in GS 100 - recognized for excellence and maturity • Collabera named among the Top 500 Diversity Owned Businesses • Collabera listed in GS 100 & ranked among top 10 service providers • Collabera was ranked: • 32 in the Top 100 Large Businesses in the U.S • 18 in Top 500 Diversity Owned Businesses in the U.S • 3 in the Top 100 Diversity Owned Businesses in New Jersey • 3 in the Top 100 Privately-held Businesses in New Jersey • 66th on FinTech 100 • 35th among top private companies in New Jersey *********************************************** Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description • The primary responsibility is in plastic co-injection molding process and polymer melt extrusion process, and their mold/tool design to support for existing and new and pipeline device delivery for device-drug combination products. • Major responsibility in device plastic molding, co-injection molding and co-extrusion processes with the design of mold/tool from the small scale to the large scale of commercial production by utilizing GMP and ISO standards, and also testing for high volume productions to support biopharmaceutical products. • Partnering with third party manufacturing (TPM) from the small-scale molding with mold/tool design to scale up for the commercial production in the co-injection/co-extrusion and their mold/tool design for scale up for commercial applications. Major Responsibilities: • Responsible for medical device part co-injection and co-extrusion processes, and their mold/tool design and scientific molding to support processing optimization for high volume injection and extrusion processes • Responsible for the molding/extrusion process, polymer material and equipment integration to develop process and broaden the process space of co-injection and co-extrusion processes • Responsible to partner with TPM to design mold/tool and molding/extrusion process with the selected materials and injection and co-injection molding machine for process optimization • Responsible to work with design engineers to design and develop the part design and conduct the molding trials to optimize the part design, mold/tool design and molding and co-injection process through quality by design to meet the functionality and manufacturability requirements Skills Requirements • Experience in part molding in co-injection and co-extrusion processes with scientific molding approach to broaden the process space to meet part dimension specs and tolerance ranges • Experience in Moldflow analysis software and with polymer material properties to assess and predict the part quality in terms of part dimension, warpage, and built stress mitigation to optimized the part quality • Hand-on experience in co-injection and co-extrusion processes and in partnership with TPM for the part develop and manufacture for multiple layers of co-injection and co-extrusion parts • Hand-on experience in both melt extrusion and injection molding is preferred • Experience in polymer, plasticized polymer and thermoplastic elastomer (TPE) co-injection and melt extrusion and their mold/tool design and development for scale up to commercial production • Experience in system integration of design, materials, process, equipment and assembly for medical device and experience in device functionality testing of components and assembly • Experience in partnering with third party manufacturing for production to develop the mold/tool and their design trials for part functionality and manufacturability applications. Qualifications BS with preferred 5-10 years of experience; Or MS with preferred 3-10 years of experience; Or Ph.D. with preferred 2-8 years of experience in Molding/Extrusion Engineering, Manufacturing Engineering, Material Engineering, Mechanical Engineering, Biomechanical Engineering, or Biomedical Engineering. Additional Information All your information will be kept confidential according to EEO guidelines.

it's what's inside that counts _______________________________ There's more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it's the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: * Hands-on experience in real-world projects across our recycling centers, fabrication plants, manufacturing facilities, steel mills, and offices * Mentorship and guidance from industry professionals committed to helping interns grow and succeed * Exposure to multiple departments, giving interns a broad understanding of our business and operations * Opportunities to innovate, contribute ideas, and make a meaningful impact from day one * A collaborative and inclusive culture that values fresh perspectives and diverse backgrounds * Pathways to full-time employment, with many interns transitioning into long-term careers at CMC Why This Job CMC provides an excellent opportunity to learn the steel, construction reinforcement and ground stabilization industries and to grow in your career. Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and support from your team that you need to excel in your role and reach your full potential. What You'll Do * Cross-train through the department to learn hands-on skills related to industrial/engineering technologies * Identify, evaluate, and recommend cost saving opportunities by identifying process, quality and safety related improvement projects * Work closely with other on the CMC Team work on process improvement initiatives & projects * Presentation/Report on an improvement project at the end of internship * Ability to troubleshoot work related problems using job knowledge, experience, and by communicating with others * Participate in the CMC Safety Programs and proactively uphold the CMC Safety Culture What You'll Need * Must possess a strong interest in Industrial Engineering Technologies and be enrolled at Junior/Senior level education * Able to work a flexible schedule to include 40 hour work weeks during summer (June-August) * Able to work independently, take initiative and drive for results with minimal supervision * Knowledge of processes in Microsoft windows, engineering software such as Auto CAD and Solid Works * Ability to understand and apply ISO work instructions and standard operating practices and procedures * Ability to work with exposure to extreme temperatures, chemicals, dust fumes and mists, uneven surfaces, loud noise, elevated work areas, and confined spaces * Push and pull up to 90 lbs and carry 50 lbs * Strong communication skills required. Must read, speak and understand English language in verbal and written communication * Previous internship experiences preferred Your Education * Must be actively enrolled in an accredited university program pursuing a Bachelor's degree in Engineering or related field at time of internship (Junior level or higher preferred) * High School Diploma or GED required We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years - and we're just getting started. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC. Apply today and start moving your career - and our world - forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. From Fortune Magazine. 2025 Fortune Media IP Limited. All rights reserved. Used under license. Current Employee? Click Here to Apply. Current Employees Apply Click here to apply. Nearest Major Market: San Antonio

Must be a U.S. Citizen Clearance Required: Position requires a SECRET Security Clearance with ability to gain a TS clearance and SCI eligibility Education: High school graduation or equivalency certification. Desired Education: Completion of a technical school, trade school, or advanced armed services technical school curriculum or course of training in electricity, electronics, avionics, mechanics, armaments/ordnance, or engineering technology, or completion of at least 30 semester hours (45 quarter hours) of course studies at an accredited college or university in an engineering, scientific, or technical curriculum. Experience: 4 years of progressive responsible engineering or technical experience in support of fabrication of test equipment, installation of communications or test and evaluation efforts Desired Experience 8 years of experience in performing electricity, electronics, avionics, mechanics, armaments/ordnance, or engineering technology functions 2 years' experience shall have consisted of performing engineering/technical functions with respect to support of manufacturing of test and evaluation, aircraft systems, avionics systems, or equivalent Prior military aircraft maintenance, operation, or support experience Experience with electronic warfare, acoustics, radar, communications or armaments Flight test or test support experience DoD and commercial standards (interfaces, protocols, etc.) used in integrating wired networks in Naval aviation weapons systems. DoD and commercial standards (interfaces, protocols, waveforms, etc.) used in wireless networks involving Naval Aviation weapons systems. Strong communications skills Position Description: Typically performs all functional duties as part of an integrated test team Applies experience and skills to operate, maintain, repair, and investigate anomalous behavior of maritime patrol aircraft systems, including flight vehicle, sensors, weapons, control station and integration Participates in pre-event briefings, test execution, post-flight activities and data analysis in support of test program execution. Benefits: Medical, Dental, & Vision Plan, short- and long-term disability, accidental death & dismemberment, 401K retirement & matching, Tuition assistance program, direct deposit, leave package and 11 paid federal holidays. Salary: The projected salary range for this position is $130,000-145,000; however, this is not a guarantee of salary. Salary will be set based on experience and contractual requirements.