Advanced engineer jobs in Union, NJ

At IPS, we are global leaders in developing innovative solutions for the consulting, architecture, engineering, project controls, procurement, construction management, and CQV of technically complex facilities, primarily in the life sciences industry. We are looking for a dedicated Senior Cost Engineer to join our talented team at our office located in Somerset, New Jersey. In this role, you will be assigned to projects to review, coordinate, and summarize the activities of cost control, planning and scheduling, document control, and estimating. You will also support the Project Manager in the delivery of individual projects, focusing on quality objectives and ensuring the achievement of safety objectives on assigned projects. Additionally, you will coordinate resources to achieve project goals, interact with clients on assigned projects, and promote positive relationships. Position Responsibilities Identifies and analyzes potential project problems. Develops working knowledge of prime contract requirements and applies knowledge to project activities. Coordinates review and approval from the Project Executive and/or Director of Operations, and communicates this information to the project team. Supports the Project Manager in the following: Development and maintenance of written project scopes of work and communication of this information to the project team. Development and maintenance of project schedules, including targeted and actual activity lists, durations, and sequencing logic, and communicating this information to the project team. Monitoring and reporting project costs. Development of change control documentation and related financial documentation. Coordination of safety resources to monitor site safety and correct nonconformances. Procurement and coordination of all required project resources, including intra-divisional, inter-divisional, and extra-corporate. Preparation of subcontracts, purchase orders, change control documentation, and related financial documentation. Evaluation of vendor and subcontractor invoices. Facilitating communication between project participants and producing documentation of communication between project participants. Develops a thorough understanding of contractually required quality in design and construction and supports quality assurance for the project. Supports the Financial group in the preparation of invoices to clients. Works with Document Control to ensure that all project documents are distributed, reviewed, and stored to meet project and corporate requirements. The salary offered for this role is between $100,000 and $140,000, but the actual salary offered is dependent on skills, experience, and education Qualifications & Requirements 16+ years of professional experience. Bachelor's degree in a technical field: engineering, project management, construction management. Experience in cost engineering, estimating, scheduling, and earned value management. Has a working knowledge of the project budget and identifies exceptions to the project budget throughout the execution of the project. Experience in developing and managing multiple concurrent projects and in developing and executing PMO best practices. Experience in all facets of Engineering, Procurement, and Construction Management (EPC). Professional credentialing is strongly encouraged: CCT or CCP, CST or CSP, EVP, CMIT or CCM, PMP, EIT. High level of computer expertise in multiple industry-wide software products MS Office Products Scheduling software such as Primavera and MS Project Client ERP systems such as JDE, QUAD, SAP, ARIBA, CONCUR PPM Software: Prolog, Proliance, Prism G2, Procore, Cleopatra, Cora Systems Context, Environment, & Safety A safety-minded individual who must comply with the IPS Mission Zero Safety policy. Capable of working alone or as part of a team without a significant level of supervision. The employee is frequently required to stand, walk, and sit for long periods of time with extended computer use. Experience working in both a Home Office and a Field environment. Travel to client sites as needed. This position is a safety-sensitive position. The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research, or other "non-administrative" areas. All interviews are conducted either in person or virtually, with video required. About Us IPS, a Berkshire Hathaway company, is a global leader in technical consulting, architecture, engineering, procurement, construction management, commissioning, qualification, and validation services for technically complex facilities. Integration is how we think and work. It requires the ability to unite existing and emerging technologies into a process that reliably delivers products and accelerates speed to market. That end-to-end mindset allows us to be agile and anticipate challenges as we move projects toward operational readiness. IPS applies design and delivery expertise, client-side experience, and supplier-side insight to every project. We infuse our curiosity, our passion, and our commitment to partnership in delivering solutions at any scale. We meet our clients where they are and get them to where they need to go. That's only possible when we care as much as our clients do. Specialties Process Architecture, Process Design, Engineering, Construction, Commissioning, Qualification, LEAN Project Delivery, Strategic Master Planning, Energy Conservation Management, Project Controls, Program/Project Management, Operations/Logistics Strategy and Planning, EPCMV, and Staffing Services. All qualified applicants will receive consideration for employment at IPS without regard to race; creed; color; religion; national origin; sex; age; disability; sexual orientation; gender identity or expression; genetic predisposition or carrier status; veteran, marital, or citizenship status; or any other status protected by law. IPS is proud to be an affirmative action and equal opportunity employer. Connect With Us! If you do not meet the qualifications for this specific role, but would like to submit your resume for general consideration, please click here!

Job Posting Title: Cloud Infrastructure Site Reliability Engineer (SRE) As a Cloud Infrastructure Site Reliability Engineer (SRE) with expertise in multiple public cloud service provider platforms, you will be responsible for operating infrastructure solutions, following the principles and practices pioneered by Google's SRE model. Your work will ensure our cloud services meet uptime, reliability, and performance targets, and you will drive automation and continuous improvement across our production environments. This role will involve collaborating with cross-functional teams to enhance our cloud reliability posture and streamline processes through automation. Key Responsibilities: • Design, build, and maintain highly available, scalable, and secure cloud infrastructure on platforms such as AWS, GCP, or Azure. • Develop and implement automation for provisioning, monitoring, scaling, and incident response using Infrastructure-as-Code tools (e.g., Terraform, CloudFormation, Ansible). • Monitor system reliability, capacity, and performance; proactively detect and address issues before they impact users. • Respond to production incidents, participate in on-call rotations, and lead post-incident reviews to drive root cause analysis and reliability improvements. • Collaborate with software engineering and security teams to ensure new services and features are production-ready and meet reliability standards. • Build and maintain tools for deployment, monitoring, and operations; automate manual processes to reduce toil. • Document operational processes and system architectures to ensure knowledge sharing and repeatability. • Continuously evaluate and implement new technologies to improve system reliability, security, and efficiency. Qualifications: • Bachelor's degree in Computer Science, Engineering, or a related technical field, or equivalent practical experience. • 3+ years of experience in software development with proficiency in at least one programming language (e.g., Python, Go, Java, C++). • Experience administrating cloud platforms (AWS, GCP, Azure), including networking, security, containerization, storage, data management, and serverless technologies. • Solid understanding of Linux systems, networking fundamentals, virtualized, and distributed systems, file systems, system processes and configurations. • Deep understanding of observability (monitoring, alerting, and logging) tools in cloud environments. Ability to set up and maintain monitoring dashboards, alerts, and logs. • Familiarity with Continuous Integration/Continuous Deployment (CI/CD) tools for automated testing, deployments, provisioning, and observability. • Ability to manage and respond to incidents, perform root cause analysis, and implement post-mortem reviews. • Understanding of setting, monitoring, and maintaining Service-Level Objectives (SLOs) and Service-Level Agreements (SLAs) for system reliability. Additional Qualifications a Plus: • Experience working with enterprise-scale financial services or other regulated industries • 5+ years of experience in SRE, DevOps, infrastructure, or cloud engineering roles, preferably supporting large-scale, distributed systems. • Excellent problem-solving, troubleshooting, and communication skills. • Experience leading technical projects or mentoring junior engineers. • Certifications: Certified Engineer, DevOps, SRE, CSREF

A client of Insight Global in the Bronx, NY is seeking a Production Engineer to join their team! This individual will be responsible for leading manufacturing improvements by optimizing packaging line performance and minimizing downtime through data-driven analysis. Must partner with cross-functional teams to implement sustainable process enhancements and uphold quality standards, as well as applying Lean Six Sigma methodologies to drive efficiency and support continuous improvement. This is an onsite position; candidates are required to be onsite 5 days per week. Required Skills & Experience 5-7 years of experience as an engineer in a manufacturing environment Bachelor's degree in engineering (mechanical, chemical, or biomedical preferred) Experience partnering with cross functional teams Strong understanding of Lean and Six Sigma principles

Role: Wireless Research Engineer - Telecom Duration: 12 Months Mode of Work: Onsite for 5 days. Responsibilities: Research and develop intelligent solutions for O-RAN and RIC platforms (RT/NRT). Build and optimize AI/ML models for RAN performance and automation. Develop and integrate xApps/rApps using Java and Python. Manage and analyze telecom data using SQL/NoSQL databases. Collaborate on system simulations, modeling, and prototype testing. Skills & Experience: Strong background in Wireless Communications / Telecom Systems. Proficiency in Java, Python, and AI/ML frameworks (TensorFlow, PyTorch). Experience with O-RAN, RIC platforms, and network optimization. Knowledge of databases, data analytics, and cloud-native environments. Master's or PhD in Electrical Engineering, Computer Science, or related field. Preferred: Familiarity with 3GPP / O-RAN Alliance standards and open-source RIC frameworks. Experience with 5G/6G, edge computing, or network automation.

STAND 8 provides end to end IT solutions to enterprise partners across the United States and with offices in Los Angeles, New York, New Jersey, Atlanta, and more including internationally in Mexico and India. Our Technology Solutions team is seeking an experienced and highly skilled Site Reliability Engineer (Genetec) to join our team in support of a global Media & Entertainment client. Ideally, you will have advanced knowledge of Genetec Security Center and related security software, with the ability to set up servers, test software, create staging environments, and build connections to other systems. This role requires hands-on expertise in software development, system configuration, and network security. We are looking for team players that can add value with their contributions and enjoy working with a great group of people. This project will require the person to work onsite 5 days / week in Englewood, NJ. Our team is setting up interviews immediately and if you'd like to work in a dynamic Entertainment environment with a lot of action, you'll love this job! Responsibilities Conduct regular system checks to ensure optimal performance, including verifying communication links. Monitor and support the Genetec unified system, managing access control systems such as readers, panels, turnstiles, and other I/O devices, as well as video surveillance systems including cameras, LPR, and video analytics modules. Perform initial diagnostic troubleshooting to identify and resolve simple network and system issues, escalating as necessary. Uphold high standards and best practices, including testing, documentation, process application, and solution deployment. Generate monthly metrics reports to track system availability and firmware status. Maintain integrations with third-party solutions using restful API, IIS, and SQL querying for reporting modules. Handle initial escalations from system failures and coordinate with third parties as needed. Support and monitor facility systems such as Continuum, ScheduAll (resource/asset scheduling), EOMS (asset management), EPMS (Electric Power Monitoring System), and TripShot (Shuttle service portal). Participate in system upgrades and patching activities. Provide support during major incidents and outages as required. Collaborate with other engineering teams to integrate new tools and automate existing applications. Interface with various Technology organization teams, including cyber, networking, firewall, Wintel, database, and data warehouse teams. Manage access control and video devices for multiple campuses, both domestic and international. Partner with Security Engineering team for system knowledge transfer. Oversee vendor management. Monitor and support Global Risk and Incident response applications and mass communication systems. Requirements Minimum of 3 years' experience with Genetec systems V5.11+ and knowledge of high availability enterprise architectural designs. At least 3 years' experience designing scalable and reliable enterprise solutions, considering multi-tier software architectures, networking, and security. 3+ years of experience in managing and maintaining facility management systems. System administration experience with Windows and Linux. Effective communication skills, both written and verbal, with stakeholders and engineers. Experience with change management methodologies. Proficiency with identity access systems. Strong problem-solving abilities. Ability to work within a fast-paced agile process. Ability to build effective cross-functional relationships to deliver enterprise-wide solutions. Self-starter, results-oriented. Experience creating network and system diagrams for both established and new proposed deployments. Familiarity with third-party systems and custom applications. Provide system support during business hours and after hours on an on-call basis. Preferred Qualifications Current and active Genetec Enterprise certifications. Fundamental understanding of Networking (Network+ or CCNA). 2+ years' experience with cloud-based infrastructure and platform services (Azure, AWS) preferred. 3+ years of experience in developing, deploying, and operating facility management systems. 3+ years of experience in support of Global Risk and response systems. Experience with network protocols such as TCP/IP, SNMP, Modbus, and BACnet. Ability to read and interpret drawings, wiring diagrams, and device data sheets. Experience with automation and motivation around leveraging tools Additional Details The base salary range for this position is $65.00 - $75.00 per hour, depending on experience. Our pay ranges are determined by role, level, and location. The range displayed on each job posting reflects the minimum and maximum target for new hires of this position across all US locations. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Benefits Medical coverage and Health Savings Account (HSA) through Anthem Dental/Vision/Various Ancillary coverages through Unum 401(k) retirement savings plan Company-paid Employee Assistance Program (EAP) Discount programs through ADP WorkforceNow About Us STAND 8 provides end-to-end IT solutions to enterprise partners across the United States and globally with offices in Los Angeles, Atlanta, New York, Mexico, Japan, India, and more. STAND 8 focuses on the "bleeding edge" of technology and leverages automation, process, marketing, and over fifteen years of success and growth to provide a world-class experience for our customers, partners, and employees. Our mission is to impact the world positively by creating success through PEOPLE, PROCESS, and TECHNOLOGY. Check out more at ************** and reach out today to explore opportunities to grow together!

Hello, We have 4 urgent openings for a "Principal Java Engineer ". These are hybrid roles in Jersey City, NJ (Hybrid - approximately 1 week onsite per month) Only looking for candidates who can work on W2 Strictly no C2C or third-party vendors Job title: Principal Java Engineer Client: Fidelity Title: Senior Java Engineer Location: Jersey City, NJ (Hybrid - approximately 1 week onsite per month) Duration: Long-term contract Rate: • $70 - $75/hr on 1099 • $75/hr on W2 Local candidates strongly preferred About the Role Fidelity is seeking an experienced Senior Java Engineer to join a high-performing engineering team responsible for building and enhancing cloud-native, high-performance backend systems. This role focuses on Core Java, AWS, and distributed microservices to support mission-critical financial platforms used across the organization. The ideal candidate is strong in backend development, cloud engineering, distributed databases, and large-scale system performance. Key Responsibilities • Design, develop, and optimize backend services using Core Java • Build and enhance microservices supporting high-throughput, low-latency financial workloads • Develop cloud-native solutions using AWS services such as Lambda, EC2, S3, CloudWatch, IAM, and API Gateway • Work extensively with distributed data stores including Cassandra for large-scale, resilient data processing • Implement RESTful APIs to support enterprise integration and platform connectivity • Ensure performance, scalability, security, and reliability across backend components • Collaborate closely with DevOps, QA, SRE, and Architecture teams • Participate in Agile ceremonies, code reviews, and engineering best-practice discussions • Troubleshoot production issues, optimize backend performance, and contribute to stability and resilience improvements • Support ongoing modernization, refactoring, and cloud-migration initiatives across Fidelity platforms Required Skills • Strong hands-on expertise in Core Java and backend engineering • Experience with AWS services (Lambda, EC2, S3, IAM, CloudWatch, SQS, etc.) • Hands-on experience with Cassandra or other distributed databases • Strong understanding of REST APIs, microservices, and distributed system patterns • Experience with CI/CD pipelines, containerization, and modern DevOps workflows • Solid debugging skills and ability to identify performance bottlenecks • Excellent communication and collaboration skills • Experience in financial services or large-scale enterprise environments is a plus ABOUT US: Anagh Technologies is a technical consulting firm specializing in UI, Front-End, and Full-Stack web technologies. We currently have 30+ positions in Angular, React, Node, and Java. If technically strong, we can 100% get you an offer within 2 weeks MAX, as we will consider you for multiple roles at once. If you are interested and are available, please email me your resume and contact information to arshad AT anaghtech.com. Thank you for your time.

VERSA is a leading manufacturer of pneumatic control valves, serving diverse industries including energy, manufacturing, Industrial automation, oil and gas, OEM machinery, and aerospace. Our products play a crucial role in enhancing operational efficiency and reliability across these sectors. Do you have a passion for working with your hands, an eye for detail, and enjoy being part of a team that creates high-quality products? If you are an enthusiastic engineer ready to learn, solve problems, and make an impact, we encourage you to apply! Key Responsibilities • Troubleshoot and resolve assembly issues on the production floor. • Serve as a liaison between Production, Engineering, and Quality Control. • Identify and implement process improvements that enhance efficiency and quality in assembly. • Work with Manufacturing Engineering on test fixture updates and upgrades. • Drive assembly related customer complaint investigations and corrective actions. • Contribute to assembly KPIs and continuous improvement efforts. • Assist with engineering drawings, work instructions, and visual aid. Qualifications • BS in Mechanical Engineering (or related MET discipline). • 1-2 years of experience preferred, but recent or upcoming graduates are encouraged to apply. • Strong mechanical aptitude and a desire to be hands-on. • Excellent problem-solving and communication skills. • A team player with curiosity, initiative, and a drive for improvement. • Bilingual English/Spanish (written and verbal) a plus. Why VERSA? • A collaborative, innovative engineering environment where your ideas matter. • A respected, long-standing leader in pneumatic valve technology. • A family-oriented culture where people grow and stay. • High integrity, strong values, and a commitment to doing the right thing. • Opportunities for professional growth. • Competitive compensation, incentives, and benefits. There is a reason many people join VERSA and stay for decades-we are a family-oriented organization with a strong culture of integrity, personal growth, and long-term partnerships.

Job title: Principal Engineer - Cash Management Account (Wealth / Brokerage Integration) Contract: 6 months with possibility for further extensions We are seeking a hands-on Principal Engineer to lead the architecture and prototype development of a new Cash Management Account capability within the Wealth Management & Private Banking division. The role focuses on creating an integrated, seamless client experience between brokerage investment accounts and core banking deposit platforms. This is a greenfield initiative at prototype stage, requiring a leader who combines deep financial product knowledge with strong architectural and full-stack engineering capabilities. The selected individual will define and drive the technical approach end-to-end-from concept through early build-working closely with wealth, brokerage, architecture, and operations teams. Key Responsibilities Lead design and technical delivery of the new Cash Management Account capability-defining architecture, data flows, and integration approach end-to-end. Build an early prototype/MVP to demonstrate feasibility and influence program funding. Define and implement the integration layer between: Brokerage platforms Core banking deposit systems (FIS EBS) Wealth digital channels and assisted servicing platforms Payments / Transfer Hub domain services Design and guide development of the Sweep Engine (logic for sweeping cash between investment and deposit accounts based on client rules and preferences). Implement secure, scalable, modern service architecture aligned with enterprise standards (APIs, domain services, events, etc.). Collaborate with product, operations, wealth business stakeholders, and solution architects to align requirements and experience flow. Mentor, guide, and (optionally) coordinate a small supporting full-stack engineering team. Required Experience & Skills Domain Expertise Direct experience designing or working with brokerage cash management products, sweep programs, or integrated investment/banking experiences. Strong understanding of wealth client operations, investment accounts, positions, funding flows, and deposit account servicing. Familiarity with U.S. cash sweep structures, FDIC insurance strategies, cash allocation rules, and brokerage-bank integration models. Technical Leadership 10+ years engineering experience with 3+ in principal / lead engineer capacity. Ability to drive solution design from scratch (architecture, modeling, interfaces, data contracts). Demonstrated success building prototypes and early-stage products in large organizations. Technology Skills Strong hands-on programming in Java or Python, with experience in modern microservices architecture. Experience building API-driven and event-driven distributed systems. Understanding Angular UI integration is beneficial. Experience integrating with: Core banking systems (e.g., FIS EBS, Finastra, Temenos, Flexcube, etc.) Brokerage / wealth platforms Payment hubs, domain services, workflow engines (PEGA optional) Preferred Background Experience working in Wealth Management or Private Banking divisions Experience building cash sweep / liquidity / treasury funding features. Previous contribution to new product incubation or architecture modernization programs.

*Presently we are unable to sponsor and request applicants to apply who are authorized to work without sponsorship* (Can work only on W2) Below are the few details of the opportunity. Job Title: Software Engineering (SRE/DevOps/Windows Eng) Location: Jersey City, NJ 07310 - Onsite Duration: Contract to Hire Job Description: About Candidate: End to end - development, deployment, automation & monitor - using Automation CI/CD pipelines Working with SQL servers, oracle Most apps deployed on windows servers - (windows stack - deployment front end web servers, application servers and database servers) Manage vendor applications Experience with reporting Observability - is key - Graphana, dashboards, Dynatrace, SQL monitoring Agile Skills (required) - Windows PowerShell - scripting / APIs (post man, swagger) Automation - (jewls PL), this is an CI/CD process

Nationwide Opportunities Do you thrive on optimizing systems, improving yields, and driving operational excellence? Whether your background is in pharma, biotech, medical device, or advanced manufacturing, we'd love to connect. At Scientific Search, we partner with industry leaders and emerging innovators across the U.S. who rely on talented Process Engineers to enhance production efficiency, scale technologies, and ensure consistent product quality. We're continually supporting new searches and always expanding our network of process professionals. We're Interested In Connecting With Engineers Experienced In Process development, scale-up, and optimization Equipment design, installation, and validation Root cause analysis, troubleshooting, and continuous improvement (Six Sigma, Lean) cGMP manufacturing support within regulated environments Cross-functional collaboration with operations, quality, and R&D teams If you'd like to be considered for future Process Engineer roles, please send us your resume. We'll keep you in mind as new positions arise that fit your expertise, interests, and preferred locations. Submit your resume We're always growing our network of skilled Process Engineers - let's stay connected so we can help you discover the right opportunity when the time is right. #19580

Job Title: Project Quality Engineer Shift: 1st Shift (Monday - Friday) Pay Rate: Up to $75000-$95,000 annually (commensurate with experience) Type: Direct Hire Reports To: QA Manager Dept.: Quality Assurance Job Description The Project Quality Engineer supports the Quality Assurance Manager in overseeing the Quality Assurance program for assigned rail car manufacturing projects. This role ensures compliance with contract requirements, technical specifications, and industry standards across production, acceptance, warranty, and modification phases. Responsibilities include creating Master Test and Inspection Plans, First Article Inspection schedules, Project Quality Plans, and audit procedures. The Project Quality Engineer coordinates closely with customers, vendors, and internal Kawasaki divisions to align project requirements, resolve quality issues, and support continuous improvement initiatives. This position also monitors documentation, leads corrective action activities, conducts contract reviews, and provides weekly and monthly quality reports. The engineer will serve as a primary Quality liaison between internal teams, subcontractors, and customer Resident Inspectors, ensuring timely communication, follow-up, and delivery of all quality-related commitments. Candidate Fit Summary This candidate is an excellent fit for organizations in the rail, aerospace, transportation, and heavy manufacturing sectors where strict compliance, technical quality standards, and contractual requirements are essential. They bring strong experience supporting complex production programs, managing supplier and customer interfaces, and developing detailed quality documentation. Skilled in FAI, FMEA, audits, and ISO 9001 processes, they excel in environments requiring strict quality controls, cross-functional coordination, and schedule accountability. Their ability to lead inspections, manage customer quality requirements, and drive corrective actions makes them a strong match for production-focused, project-driven engineering organizations. Essential Functions Implement and maintain QA programs for assigned contracts. Develop Master Test and Inspection Plans, Project Quality Plans, FAI schedules, and audit procedures. Attend project meetings and provide detailed quality status updates and reports. Analyze quality issues, identify root causes, and drive corrective actions. Coordinate with customers, suppliers, and internal teams across production and warranty phases. Manage project quality schedules and interface with Resident Inspectors. Ensure compliance with customer specifications, contract terms, and Kawasaki quality standards. Review and approve subcontractor/supplier documentation (PSI, FAI, audits, drawings, field reports). Monitor and report deviations, implement process improvements, and update procedures. Support Configuration Management planning, execution, and product delivery. Assist with subcontractor activity quality review and documentation. Travel domestically/internationally up to 30% to support project quality functions. Job Specifications Bachelor's Degree in Engineering (Master's preferred). Minimum five (5) years' experience in rail, aerospace, transportation, or heavy manufacturing. Knowledge of FAI, FMEA, ISO 9001, and source inspection processes. Strong communication, analytical, reporting, and computer skills. Ability to plan, coordinate, and manage workloads across multiple concurrent projects. Capable of working in both office and field/manufacturing environments. Work Environment Office and manufacturing floor settings. Frequent interaction with engineering, production, and customer teams. PPE required in production areas; must adhere to all safety protocols. Candidate Fit This candidate is a strong fit for Project Quality Engineering roles in complex manufacturing environments like rail, aerospace, automotive, and heavy industrial production. They have demonstrated capability in quality planning, regulatory compliance, supplier oversight, and customer interface management. With experience leading FAIs, audits, and corrective actions while supporting production schedules, they excel in driving continuous improvement, ensuring contract compliance, and maintaining high standards of safety, product quality, and documentation integrity. Their structured approach, technical acumen, and ability to manage project-based workloads make them a key contributor to high-complexity engineering programs. Company Overview Founded in 2010, Top Prospect Group was created with a focus on matching high-quality candidates with top-tier clients while fostering an environment where success is shared by all. In 2023, the company was acquired by HW Staffing Solutions, expanding its service offerings to include technology, engineering, and professional services. Qualified candidates are encouraged to apply immediately! Please include a clean copy of your resume, salary expectations, and availability with your application.

Hanwha Vision America (HVA) is an affiliate of the Hanwha Group, a Fortune Global 500 company. HVA is an industry-leading provider of advanced network video surveillance products, including IP cameras, storage devices, and video management systems, founded on world-class technologies. We offer end-to-end security solutions and have achieved global success across a wide range of industry verticals, including retail, transportation, education, banking, healthcare, hospitality, and airports. Hanwha Vision America (HVA) is seeking a Repair/ Quality Engineer to support HTCC's engineering and repair operations by performing intake screening, basic diagnostics, quality checks, and documentation. The role ensures that incoming units are properly evaluated, repair processes run efficiently, and completed products meet quality standards before shipment. This position combines repair-support responsibilities with quality assurance activities to improve workflow efficiency, accuracy, and overall service performance. Major Functions / Accountabilities Perform initial screening and basic functional checks on incoming units Identify obvious issues or simple conditions that can be resolved before repair Support repair workflow by preparing units, organizing information, and performing basic diagnostics Conduct quality checks on completed repair units to ensure they meet internal standards Document inspection results and update system records accurately Assist with failure analysis for repeated issues and provide feedback to engineering Inspect packaging quality and verify final shipment readiness Collaborate with repair staff, engineering, logistics, and warehouse teams as needed Maintain checklists, guidelines, and standard procedures for inspection work Support process improvements related to efficiency, quality, and documentation compliance Knowledge, Skills & Requirements Preferred background: Electronics, Electrical Engineering, Computer Engineering, or related field Basic understanding of electronic components (e.g., resistors, capacitors, diodes) Ability to use multimeters and basic diagnostic tools Strong attention to detail and problem-solving skills Ability to follow technical checklists and standardized procedures Proficiency with Microsoft Office and basic system data entry Bilingual (Korean/English) preferred but not required

We are seeking an Electrical Engineer with experience in designing power distribution, lighting, lighting controls, fire alarm, and low voltage systems for commercial and/or residential buildings. The successful candidate will be familiar with the National Electric Code, Building Codes, and NFPA. Key Responsibilities: Design power distribution, lighting, lighting controls, fire alarm, and low voltage systems for commercial buildings. Ensure compliance with the National Electric Code, Building Codes, and NFPA. Use AutoCAD and Revit for design work. Collaborate with project teams and clients to achieve project goals. Review construction documents and provide construction administration support. Qualifications: Bachelor of Science degree in Electrical Engineering preferred. Familiarity with the National Electric Code, Building Codes, and NFPA. Proficiency in AutoCAD and Revit. Strong communication and collaboration skills. Attention to detail. Ability to work independently and in a team environment. PE and EIT positions available if you have more experience

At Fluidstack, we're building the infrastructure for abundant intelligence. We partner with top AI labs, governments, and enterprises - including Mistral, Poolside, Black Forest Labs, Meta, and more - to unlock compute at the speed of light. We're working with urgency to make AGI a reality. As such, our team is highly motivated and committed to delivering world-class infrastructure. We treat our customers' outcomes as our own, taking pride in the systems we build and the trust we earn. If you're motivated by purpose, obsessed with excellence, and ready to work very hard to accelerate the future of intelligence, join us in building what's next. About the Role As Power Electronics Engineer in the Advanced Engineering group, you will architect the future of data center infrastructure, designing innovative High and Low Voltage Direct Current (HVDC/LVDC) electrical systems. You will pioneer thermal and magnetic design solutions that ensure the reliable power delivery and operation of millions of GPUs. The Focus Lead end-to-end power electronics development for HVDC/LVDC power architecture systems serving multi-gigawatt GPU computing loads, from circuit design through manufacturing Design high-power, high-voltage control and protection circuits including SiC/GaN gate drivers, fault detection systems, and isolated sensing for DC power distribution platforms Develop embedded control systems using microcontrollers, DSPs, and FPGAs for real-time power management, monitoring, and protection of high-frequency power electronics Design auxiliary power supplies for 800V-1500V DC inputs, isolated communications interfaces, and EMI/EMC compliant circuit architectures Perform circuit simulation, PCB layout (Altium Designer, SPICE, PLECS), thermal analysis, and design verification for high-reliability power electronics assemblies Lead reliability testing, manufacturing transfer, and field deployment support for power electronics serving mission-critical AI infrastructure About You 7+ years of experience in power electronics circuit design with deep expertise in high-voltage, high-current applications Proven track record designing and bringing up complex digital and analog circuits for power management, control, and protection systems Expert-level proficiency with PCB design tools (Altium Designer preferred), circuit simulation (SPICE, PLECS), and hands-on troubleshooting of high-voltage circuits Strong understanding of wide-bandgap devices (SiC, GaN), gate driver design, isolated power supplies, and high-frequency magnetics Experience with embedded systems programming (C/C++), FPGA development (VHDL/Verilog), and real-time control algorithms for power electronics Deep knowledge of power conversion topologies, digital control loop design, soft-switching techniques, thermal management for power semiconductors, and high-voltage insulation coordination The salary range for this position is $200,000- $300,000 per year, depending on experience, skills, qualifications, and location. This range represents our good faith estimate of the compensation for this role at the time of posting. Total compensation may also include equity in the form of stock options. We are committed to pay equity and transparency. Fluidstack is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans' status, or any other characteristic protected by law. Fluidstack will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law.

Job DescriptionDescriptionThe Process Engineering group at Knowles Precision Devices is responsible for supporting and maintaining the flow of production material for the Thin Film Product Line. The Knowles Thin Film Product Line includes RF and Microwave components for applications in telecom, aerospace and defense markets. This position is a hands-on engineering role, providing daily support to operations to maintain the flow of parts, implementing new equipment and supporting a range of improvement projects. This is a fast paced position, that expects time management to support short term and long term needs of the company. Salary and title dependent on experience. Key Responsibilities Maintain and develop Job Instructions and Work Instructions for existing and new processes Collect and analyze data on yields and process capability Provide technical skill training to operators Provide process support to minimize production down-time in assigned areas Participate in project based teams Support equipment troubleshooting and maintenance Participate in Material Review Board (MRB) for Root Cause investigations May support contract review and process rulebook maintenance, in support of new product designs Comply with and support company policies and programs regarding safety, security, ISO, EEO, OSHA Skills, Knowledge and Expertise 3+ years of experience supporting laser drilling/cutting equipment in a manufacturing environment Bachelors of Science in engineering/science, or equivalent experience Experience reading and understanding CAD engineering drawings using GD&T Experience measuring and validating workmanship to drawing specification, with optical measurement devices Ability to generate machine motion control programs (i.e. G-Code) Experience authoring job instructions and work instructions Proficiency in statistical methods (DOE, SPC, FMEA) and data analysis tools (e.g., JMP, Minitab, MATLAB, Python, SQL) Strong written and verbal communication skills, communicating to both operators and management Willingness to train others and work as a member of inter-disciplinary teams Must be able to perform lab duties in an ISO certified clean room, meeting gowning, ESD, and EHS requirements. Due to US Export Regulations all candidates must be a U.S. person (i.e. U.S. Citizen, lawful permanent resident, or protected individual) BenefitsWhat's in it for you on Day 1: Medical, dental and vision insurance plans Prescription Drug Plans Basic Life Insurance 401k plan with company match Tuition Reimbursement Program Security Clearance Incentive Program Employee Referral Program Overtime opportunities Alternate work schedules available PTO (10 days) and NYS Sick and Safe Leave Paid Holidays Exciting Onsite Perks: Free Starbucks coffee available at our café Free access to our Fitness Center Fresh food is available for purchase in the cafeteria store. Employee Appreciation Events Knowles is committed to providing a competitive and fair total compensation package for all employees. One element in our total compensation package is base pay. The starting salary for this role is targeted to be between $80,000 to $130,000 annually. Individual compensation decisions are based on a number of factors, including but not limited to previous experience and skills acquired prior to joining Knowles, cost of living in the assigned work location, assigned schedule, and salaries of similarly situated peers at the company. It is to be expected that candidates will come to us with different sets of skills and experiences and therefore will be paid at different points in the stated range. We recognize that the person(s) we select for hire may be less experienced or more experienced than the role as posted; if this is the case, any updates to available salary ranges will be communicated with candidates during the recruitment process. Equal Opportunity Statement: Knowles Precision Devices prohibits pay discrimination and discrimination of any kind based on race, color, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation, or other legally protected status. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.

Founded in 2000, CompoSecure (Nasdaq: CMPO) is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit ******************* and ******************* Position Overview: We are seeking a highly skilled Advanced Manufacturing Engineer with a strong background in high volume production environments to lead initiatives in process integration, automation, and manufacturing excellence. This role focuses on launching and optimizing production lines capable of producing millions of parts annually, with deep expertise in manufacturing processes such as metal stamping, injection molding, blow molding, and automated assembly. The Advanced Manufacturing Engineer will be expected to work on-site five days a week in our Somerset, NJ office. Key Responsibilities: High-Volume Line Integration: Lead the end-to-end integration of new products into high-volume production lines, ensuring scalability, repeatability, and efficiency. Manufacturing Process Expertise: Apply deep knowledge of CNC machining, stamping, injection molding, and automated assembly to optimize production processes and reduce cycle times. Automation & System Design: Collaborate with automation teams to design, build, and implement robust automation systems including robotics, PLCs, and machine vision for high-throughput operations. Yield & Efficiency Optimization: Analyze production data to identify bottlenecks, reduce scrap, and improve yield across high-volume lines. Defect Analysis & Surface Engineering: Conduct root cause analysis on defects, particularly surface-related issues, and implement corrective actions to maintain product quality. Cross-Functional Collaboration: Partner with R&D, Quality, and Operations to ensure seamless product launches and process improvements. Continuous Improvement: Drive initiatives focused on cost reduction, quality enhancement, and throughput maximization using Lean, Six Sigma, and SPC methodologies. Problem-Solving: Rapidly troubleshoot and resolve process and equipment issues to minimize downtime and maintain production targets. Qualifications: Bachelor's degree in Engineering (Mechanical, Manufacturing, Industrial, or related field). A minimum of 5 years (or more) of experience in high-volume manufacturing environments. Proven experience integrating products into new production lines from concept to ramp-up. Strong understanding of manufacturing processes including stamping, injection molding, blow molding, and automated assembly. Proficiency in SolidWorks for product and production line design. Expertise in automation systems including PLCs, robotics, and machine vision. Experience with surface defect analysis and in-process quality control. Proficiency in data analysis, root cause investigation, and corrective action implementation. Familiarity with Lean, Six Sigma, SPC, and continuous improvement frameworks. Excellent cross-functional communication and project management skills. Preferred Skills: Advanced SolidWorks capabilities in designing complex assemblies and production tooling Familiarity with manufacturing automation systems, including PLCs, robotics, and machine vision systems. Formal Design of Experiments (DoE) training and experience Ability to lead cross-functional teams through complex manufacturing challenges. Experience with quality management systems and continuous improvement frameworks. Knowledge of statistical process control (SPC) and other data-driven decision-making techniques At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: Medical, Dental & Vision Coverage Flexible Spending Accounts (FSA) Company-Paid Life and Disability Insurance 401(k) with Company Match Paid Time Off & Paid Holidays Annual Bonus Opportunities Employee Assistance Program (EAP) Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to **************************. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Description/Comment: ****HYBRID**** Hours: 8:00am to 5:00pm This function will be directly supporting the EUMDR project on Site. Requirements: Education and Special Training Required: Bachelors Degree in Engineering or relevant field of study Qualifications and Work Experience Required 1-3 years experience in a production/manufacturing environment. Demonstrated computer skills using Microsoft Office applications (Word, Excel, PowerPoint, Project, etc), and experienced work in a Quality Management System and UDI/MDD/MDR/UKCA Regulatory Compliance project experience is preferred. Demonstrated interpersonal, communication and presentation skills. Must be comfortable presenting at team level meetings and lead meetings as necessary. Demonstrate strong teamwork and time management skills as well as be able to operate in a fast-paced environment. Ability to perform in and be challenged by a multi-disciplinary team-based environment, which places a high degree of emphasis on accountability for quality/GMP/GDP compliance. Provide technical support for quality control, process improvement, equipment qualifications, and process validations. Operate within s quality management system (QMS) to produce and/or review documentation such as, inspection guide sheets, product drawings, dynamic control plans (DCPs), and standard operating procedures (SOPs) Additional Job Details: Periodically work independently with vendors. 2D drawing & GD&T knowledge or experience. Create and manage Engineering Change Requests as well as product impact assessments. Manage Engineering Change Notices for process changes from creation to final approval Demonstrate a general understanding of Product Part Approval Process (PPAP) Demonstrate a general understanding of First Article Inspection (FAI) process Periodically lead projects and processes; work with cross-functional teams to get these projects completed. Ability to multi-task between different projects and changes. Investigate Quality issues for root cause and recommend/implement corrective actions. Ability to oversee team members workload and provide support when issues arise. Work to support team members as both mentor/mentee when necessary.

At American Express, our culture is built on a 175-year history of innovation, shared values and Leadership Behaviors, ad an unwavering commitment to back our customers, communities, and colleagues. As part of Team Amex, you'll experience this powerful backing with comprehensive support for your holistic well-being and many opportunities to learn new skills, develop as a leader, and grow your career. Here, your voice and ideas matter, your work makes an impact, and together, you will help us define the future of American Express. Joining Amex Tech means discovering and shaping your contribution to something big. Here, you can work alongside talented tech teams and build a unique career with the Powerful Backing of American Express. With a range of opportunities to work with the latest technologies, and a commitment to back the broader engineering community through open source, our mission is to power your success. Because Amex Tech is powered by our technology, our culture, and our colleagues. The U.S. Consumer and Digital Technology (USCDT) Team brings together foundational strategic technology capabilities in digital experience engineering (Mobile and Web), AI/ML, marketing technology, enterprise communications, travel and lifestyle, and automation, grounded in our data technology model that prioritizes data governance. It employs a ground-breaking focus with development responsibilities for customer-facing capabilities that deepen and expand digital engagement, as well as core technical capabilities that cut across business lines and customer segments. **WHO WE ARE:** American Express Global Dining brings together world-class experiences through platforms like Resy, Tock, and Rooam, creating seamless connections between diners and restaurants, and the broader Amex Membership ecosystem. Our mission is to define the future of hospitality and dining through technology, data, and design. **ABOUT THE ROLE:** At American Express Global Dining, we are tackling hard problems with elegant solutions and scaling very quickly. As a Staff Software Engineer, you will play a crucial role in taking our product and engineering team to the next level. We are seeking ambitious builders who are eager to launch exciting features for our restaurant partners and diners. The ideal candidates elevate the teams around them by providing technical mentorship, setting their team's technical vision, and adapting their role to address gaps and reduce risk. You have the toolkit to work on complex and unknown problems under pressure or at speed. You thrive in a dynamic and constantly evolving environment, you are a collaborator and an innovator, and you are excited about what technology is doing for the hospitality industry. **Minimum Qualifications:** + Bachelor's degree in computer science, computer science engineering, or related field + 8 years of experience working as a Software Engineer, preferably in a fast-paced startup environment + 3 years of experience working as a Software Engineering Staff Engineer / Architect + You are a self-starter but very comfortable working closely with a team + You are comfortable working with stakeholders outside the Engineering team including our Compliance, Information Security, Product, Design, Sales and Account Management teams **You have strong expertise with the following:** + Strong experience with a backend programming language, Python & Java Web frameworks preferred + SQL / MySQL / Postgres + RDBMS and database design + Unit / Functional Testing + Linux / UNIX + Implementing and building APIs + Monitoring system performance + Leading and growing teams of fellow engineers through complex deliveries + A history of taking projects through the entire software development lifecycle from inception to delivery as a technical leader + A passion for documenting how systems work **Big Plus if you have:** + History of building and maintaining systems at large scale + Ability to effectively interpret technical and business objectives and challenges and articulate solutions + Willingness to learn new technologies and exploit them to their optimal potential + Experience with and understanding of the Resy suite of applications At the core of Software Engineering, every member of our team must be able to demonstrate the following technical, functional, leadership and business core competencies, including: + Agile Practices + Porting/Software Configuration + Programming Languages and Frameworks + Business Analysis + Analytical Thinking + Business Product Knowledge + Python/MySQL Experience + SQL Performance tuning + Microservice architectures + AWS - EC2 / RDS / S3 / SQS + Kafka / Celery / Flask / Django / Supervisord / MongoDB + Dev-ops experience + Jira / Clubhouse.io or other project management tool + Payment systems experience + Websockets experience + You enjoy at least one of the following things: shishito peppers, uni, or creme anglaise **Qualifications** Salary Range: $144,250.00 to $256,250.00 annually bonus equity (if applicable) benefits The above represents the expected salary range for this job requisition. Ultimately, in determining your pay, we'll consider your location, experience, and other job-related factors. We back you with benefits that support your holistic well-being so you can be and deliver your best. This means caring for you and your loved ones' physical, financial, and mental health, as well as providing the flexibility you need to thrive personally and professionally: + Competitive base salaries + Bonus incentives + 6% Company Match on retirement savings plan + Free financial coaching and financial well-being support + Comprehensive medical, dental, vision, life insurance, and disability benefits + Flexible working model with hybrid, onsite or virtual arrangements depending on role and business need + 20 weeks paid parental leave for all parents, regardless of gender, offered for pregnancy, adoption or surrogacy + Free access to global on-site wellness centers staffed with nurses and doctors (depending on location) + Free and confidential counseling support through our Healthy Minds program + Career development and training opportunities For a full list of Team Amex benefits, visit our Colleague Benefits Site . American Express is an equal opportunity employer and makes employment decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, age, or any other status protected by law. American Express will consider for employment all qualified applicants, including those with arrest or conviction records, in accordance with the requirements of applicable state and local laws, including, but not limited to, the California Fair Chance Act, the Los Angeles County Fair Chance Ordinance for Employers, and the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. For positions covered by federal and/or state banking regulations, American Express will comply with such regulations as it relates to the consideration of applicants with criminal convictions. We back our colleagues with the support they need to thrive, professionally and personally. That's why we have Amex Flex, our enterprise working model that provides greater flexibility to colleagues while ensuring we preserve the important aspects of our unique in-person culture. Depending on role and business needs, colleagues will either work onsite, in a hybrid model (combination of in-office and virtual days) or fully virtually. US Job Seekers - Click to view the " Know Your Rights " poster. If the link does not work, you may access the poster by copying and pasting the following URL in a new browser window: *************************** Depending on factors such as business unit requirements, the nature of the position, cost and applicable laws, American Express may provide visa sponsorship for certain positions. **Job:** Technology **Primary Location:** US-New York-New York **Other Locations:** US-Illinois-Chicago **Schedule** Full-time **Req ID:** 25021557

Job DescriptionDescriptionThe Ceramics / Materials Science Front End (FE) Process Engineer is responsible for supporting front-end ceramic processing and manufacturing. This includes not only keeping manufacturing processes fully functional and efficient, but also managing and implementing paths to higher part quality, increasing throughput, and providing higher yields. This position would focus on all aspects of plate manufacturing through firing and finishing. Key Responsibilities Perform and lead tasks, projects and all processes for plate ceramic plate fabrication in support of manufacturing (batching, casting, green plate fab, bakeout, firing and finishing. Focus will be on driving yields improvements and process efficiency Instill proper data collection and statistical process control Through expertise and the above, guide improvements to production processes High level of collaboration with Ceramics and Process Transfer Teams, and with Front End Operations Manager Significant collaborative engagement with engineers in back end processing (such as metallization) to help ensure that process improvements are fully vetted through final product. Provide and execute qualification plans for process improvements Provide and execute qualification plans for new equipment Update operators (and technicians) on procedure changes, production and quality issues Direct, train, and transfer skills/knowledge to operator, engineers and engineering technicians Investigate new suppliers, technologies for improving production, quality, end cost and throughput. Evaluate impact of Preventative Maintenance on yield/quality and co-ordinate execution of P.M. schedules; evaluate all maintenance and its possible indicators of problems. Assist Purchasing, Maintenance, and Operations to determine proper purchase/supply of spare parts, maintenance equipment, and manufacturing equipment. Update procedures based on changes in manufacturing or engineering improvements as well as environmental issues (ISO9001, ISO14001). Execute FMEA, SPC, MSA processes Conduct problem troubleshooting (fishbone analysis etc) Skills, Knowledge and Expertise BS or MS degree in engineering with an emphasis in industrial engineering, materials science, ceramic, or process engineering Strong data management skills (data management, interpretation and SPC evaluations to guide improvements Self-directed, highly professional and collaborative Direct engagement with process transfer group Strong verbal and written communication skills Strong attention to detail and propensity for accuracy of work product Accountability to the timelines of task completion Able to manage multiple tasks and priorities within a fast-paced workplace Strong problem solving skills Experience in total quality, six sigma or other similar environments preferred. BenefitsWhat's in it for you on Day 1: Medical, dental and vision insurance plans Prescription Drug Plans Basic Life Insurance 401k plan with company match Tuition Reimbursement Program Security Clearance Incentive Program Employee Referral Program Flex PTO and NYS Sick and Safe Leave Paid Holidays Exciting Onsite Perks: Free Starbucks coffee available at our café Free access to our Fitness Center Fresh food is available for purchase in the cafeteria store. Employee Appreciation Events Knowles is committed to providing a competitive and fair total compensation package for all employees. One element in our total compensation package is base pay. The starting salary for this role is targeted to be between $70,000 to $90,000. Individual compensation decisions are based on a number of factors, including but not limited to previous experience and skills acquired prior to joining Knowles, cost of living in the assigned work location, assigned schedule, and salaries of similarly situated peers at the company. It is to be expected that candidates will come to us with different sets of skills and experiences and therefore will be paid at different points in the stated range. We recognize that the person(s) we select for hire may be less experienced or more experienced than the role as posted; if this is the case, any updates to available salary ranges will be communicated with candidates during the recruitment process. Equal Opportunity Statement: Knowles Precision Devices prohibits pay discrimination and discrimination of any kind based on race, color, gender, national origin, age, disability, veteran status, marital status, pregnancy, gender expression or identity, sexual orientation, or other legally protected status. ITAR Statement: Please note that this position may require access to technical data controlled under the International Traffic in Arms Regulations (ITAR) or Export Administration Regulations (EAR). Applicants must be U.S. persons (citizens, lawful permanent residents, or individuals granted refugee or asylee status) or have the necessary authorization to access controlled technical data. Compliance with ITAR and EAR regulations is a condition of employment. Notice to Staffing Agencies, Search Firms and Recruitment Agencies: The recruitment process at Knowles is managed through the Human Resources department. Knowles does not accept resumes submitted from 3rd party agencies outside of our system. To submit resumes, 3rd party agencies will need to be a pre-approved vendor with a valid contract in place, be actively engaged by Knowles to recruit for a specific position and have agency log in credentials to submit candidates to our careers portal. Please do not submit resumes via e-mail, through our external website or directly to our employees. Any resumes submitted in this way become the property of Knowles and will not be eligible for any placement fee.