Aircraft mechanic jobs in Patchogue, NY - 354 jobs

Maintenance/Custodial/Maintenance General Date Available: as soon as possible Additional Information: Show/Hide Primary Functions Performs a variety of installation, maintenance, alteration, replacement, preventive maintenance and repair tasks on various plumbing fixtures, piping (water, waste, drainage and heating) and systems support equipment, including swimming pool and irrigation systems throughout the various facilities. Include all aspects of the plumbing trade, designing and installing new installations and modifications to existing systems, repairs to all types of piping and piping systems. Cover the duties of the Heating System Mechanic when assigned. Performing all assigned duties in a safe and professional manner and in accordance with Town and Board policies and follows all federal, state and municipal code and ordinances that affect the work being accomplished. These include OSHA and EPA regulations, state licensing requirements, and State and Local code requirements, as well as any other laws, regulations, ordinances, policies, etc. that may apply. Skills and abilities Ability to read and interpret blueprints and engineering drawings, particularly as they pertain to plumbing, irrigation and heating systems and controls. Ability to operate and maintain all tools and equipment used in these trades. Ability to lift a maximum of fifty(50)pounds. Ability to crawl into and work in confining spaces, such as pipe chases/tunnels, top of, or behind, boilers, and from ladders or staging on overhead pipes, boilers, equipment, etc., safely and in accordance with all laws and regulations pertaining to the work including OSHA confined space regulations. Minimum qualifications This person shall; (1) be a U.S. Citizen, (2) be a vocational, trade or high school graduate, or have completed the G.E.D., (3) possess a valid drivers license and a clean driving record, (4) have the ability to read and write the English language at the 8th grade level, and (5) possess the ability to read and interpret blueprints and engineering drawings as they pertain to the particular trade. Must hold CT P1 license for plumbing and S2 license for heating. An F1 or F2 license for fire protection would be a plus. At least five (5) years experience in the plumbing trade and two (2) years experience in the operation, maintenance and repair of low pressure steam and circulating hot water boilers. Must have demonstrable experience in the servicing and maintaining of HVAC equipment, and working knowledge of pneumatic controls, air compressors, and related equipment. Working Conditions Subject to exposure to inadequate light and ventilation. Will be required to wear eye, face, head, hand, foot, hearing and respiratory protection when needed. Will be required to follow all safety procedures at all times. The Board of Education will provide safety equipment required for the safe conduct of the work in accordance with state and federal regulations, town policies and bargaining unit contract. Physical demands Stands, walks, stoops, kneels, lifts, and works in all types of positions. Must be able to lift 50 pounds maximum. Must be able to handle the physical demands of the job, and work at heights on roofs, power hoists, ladders and staging. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. NOTE: This job description is a guide and not all-inclusive of tasks and responsibilities that are part of this position.

Your Impact at Lowe's As a maintenance Mechanic I, you play an important role in keeping our distribution center running smoothly. By quickly and independently fixing equipment issues in different areas, you'll help maintain a seamless flow of goods and keep our supply chain running. Your adaptable skills, combined with the ability to guide others, directly contribute to the overall efficiency of our distribution center teams. Your impact is not just about repairs - it's about creating a safe and productive environment for your fellow team members. How We Support You As an industry leader, we invest in the people and technology needed to grow and win as a team. Safety: Our commitment to safety is a key factor that attracts skilled mechanics to our team. We encourage our mechanics to take their time with their work, prioritize their physical health and safety, and take pride in keeping our facilities clean, well-maintained, and adhering to safety regulations. Culture of Belonging: Our teams enjoy a positive work environment where leaders support and respect you, and associates genuinely appreciate each other. Financial Future: We invest in you - own part of the company with our optional Employee Stock Purchase Plan, or participate in our matching 401k plan. Bonus Potential: When we win, you win. We award front line workers discretionary and profit-sharing bonuses when we succeed. Health and Wellbeing: We offer paid time off for vacations, holidays and sick time, as well as access to top-tier medical, dental and vision insurance. For information about our benefit programs and eligibility, please visit Your Day at Lowe's As a maintenance Mechanic I, you'll use your specialized expertise in conveyors, rolling stock, or building components to handle complex repairs in your area of focus. Armed with sufficient electrical and mechanical knowledge, you will independently diagnose, prioritize, plan, and execute repairs. You will also be expected to collaborate with colleagues in management or leadership when needed. Key Responsibilities Work in a distribution/warehouse environment, handling physical and environmental aspects typical to such settings. Utilize tools for maintenance tasks requiring fine motor skills and hand-eye coordination. Perform specialized repairs in conveyors, rolling stock, or building components within the Regional Distribution Center (RDC). Demonstrate electrical and mechanical ability for safe, independent equipment repairs in the Regional Distribution Center (RDC). Use trade skills, classroom knowledge, and systems experience to diagnose equipment issues and make necessary repairs. Obtain or order the proper parts necessary for equipment repairs Maintain accurate and detailed records of repairs, replacements, and maintenance activities. Adhere to safety protocols and ensure a safe working environment for oneself and others. Stay updated on new technologies, equipment, and maintenance procedures through ongoing training and education. Minimum Qualifications Possess a valid state driver's license 2 years of experience in your specialty area Combination of experience and/or technical training in electrical/electronic theory ranging up to 600 volts systems (or willingness to obtain proper training within 1 year of employment) Minimally must be able to lift 25 pounds; up to 70 pounds. Must be able to work safely with corrosive materials and at heights of 20+ feet. If required by local regulations, certified to perform work at the Maintenance Mechanic level (such as electrical work in the state of Oregon) Proven record of following safety requirements Preferred Qualifications Able to see objects and discriminate color Experience and/or certification with welding and fabrication Experience operating various maintenance and operations vehicles and equipment Experience reading blueprints, schematics, and other technical drawings Schedule Requirements Requires on-call support. Available to work a set schedule that may be changed by management based on the facility's needs. Available to work morning, afternoon, night, or weekends depending on shift and overtime based on the facility's needs. Working Conditions Environmental factors vary by location. You may be working in both inside and outside weather conditions. Exposure to varying climates, including extreme heat or cold, wet, damp, humid, windy, or drafty conditions, is possible. You may be exposed to constant or intermittent noises in addition to moving or shaking objects and equipment. Lifting methods vary based on role, weight, and volume. Associates must follow guidelines, limiting single lifts to 70 pounds. Team lifts are used minimally starting at 70 pounds or when needed. Powered equipment should be used as required, with proper training or assistance from a trained coworker. About Lowe's Lowe's Companies, Inc. (NYSE: LOW) is a FORTUNE 50 home improvement company serving approximately 16 million customer transactions a week in the United States. With total fiscal year 2023 sales of more than $86 billion, Lowe's operates over 1,700 home improvement stores and employs approximately 300,000 associates. Based in Mooresville, N.C., Lowe's supports the communities it serves through programs focused on creating safe, affordable housing and helping to develop the next generation of skilled trade experts. For more information, visit Lowes.com Lowe's is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law. Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. For information regarding our benefit programs and eligibility, please visit

Full-time Description Aircraft Technician - Join a Skilled, High-Energy Maintenance Team Long Island, NY | Ventura Air Services $45-$70/hr based on experience | Full-Time | On-Site If you're the type of A&P mechanic who can fix just about anything and thrives on variety, challenge, and quality workmanship-you're exactly who we're looking for. At Ventura Air Services, we've been maintaining and flying aircraft since 1955. We're not just a maintenance shop-we're a Part 135 charter operator and FAA-certified repair station, handling everything from heavy inspections to complex mods. If you're tired of turning the same wrench on the same aircraft every day, come work somewhere where every day is different. What You'll Be Working On: Routine maintenance and major repairs on a variety of business jets and turboprops Daily work includes aircraft from our Challenger 604 and Citation XL fleet, plus many others Diagnosing issues, troubleshooting systems, and executing efficient, quality repairs Collaborating with fellow techs, avionics specialists, and leadership to keep aircraft mission-ready Expanding your skillset through ongoing, hands-on experience Requirements What We're Looking For: Valid A&P License (required) 5+ years of aircraft maintenance experience Experience with Challenger or Citation aircraft is preferred, but not required Comfortable working across airframes and systems Strong avionics knowledge is a plus Tech savvy - especially with Microsoft Office and Adobe Acrobat Must meet physical requirements of general aircraft maintenance Clean driving record and able to pass background check + drug testing Perks & Benefits: $45-$70/hour starting, based on experience Medical, dental, and vision coverage 401(k) with company match Ongoing training & employee development programs A team that values skill, hustle, and initiative If you're ready to put your experience to work in a fast-paced, high-performance environment where no two days are the same-Ventura is the place to be. Salary Description $40.00+

**Intro** Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you'll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you'll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! **Why you'll love this job** + This job is a member of the Line Maintenance Team within the Integrated Operations Division. + Responsible for overseeing aircraft maintenance technicians in the repair and return to service of American Airlines' aircraft. Supervisors are front line leaders of people in the safe, compliant and timely return to service our aircraft. They do this by effectively managing the workload, resources, and work relationships of both internal customers & support groups and external regulatory authorities & vendors. + Salary Range: $134,000 - $166,000 **What you'll do** + Guides and directs terminal and/or hangar aircraft maintenance through crew chiefs and leads + Oversees the implementation of the organization's plans, processes, policies, and procedures + Ensures crews are efficiently utilized to accomplish the operation's workload + Meets company objectives in accordance with company policies and procedures + Responsible for timely and comprehensive communication flow to the workforce + Maintains effective work relationships with airport management, FAA, TSA, other government agencies, suppliers, and similar groups + Collaborates with other supervisors to accomplish directives and objectives + Identifies and takings steps to correct unsatisfactory results + Identifies training and development needs of AMTs within span of control + Provides effective feedback for crew chief and lead coaching/development + Effectively works with union leadership and workforce **All you'll need for success** **Minimum Qualifications- Education & Prior Job Experience** + High School diploma or GED equivalency + 3 to 4 years of aircraft maintenance experience + FAA Airframe & Powerplant Certificate + Must pass FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA) + Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable **Preferred Qualifications- Education & Prior Job Experience** + Associates or Bachelor's degree in business or technical field or equivalent work experience + 2 years of a successful track record of management in maintenance and/or production environments + 3 years hands-on experience in the repair or manufacture of large transport category aircraft **Skills, Licenses & Certifications** + Knowledge of functional area + Knowledge of Microsoft Office to include Word, Excel, Outlook, etc. + Ability to supervise management, non-management and contract labor work groups + Ability to concurrently handle multiple responsibilities + Strong interpersonal and PC skills + Ability to concurrently supervise multiple areas of responsibility **What you'll get** Feel free to take advantage of all that American Airlines has to offer: + Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network. + Health Benefits: On day one, you'll have access to your health, dental, prescription and vision benefits to help you stay well. And that's just the start, we also offer virtual doctor visits, flexible spending accounts and more. + Wellness Programs: We want you to be the best version of yourself - that's why our wellness programs provide you with all the right tools, resources and support you need. + 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. + Additional Benefits: Other great benefits include our Employee Assistance Program, pet insurance and discounts on hotels, cars, cruises and more **Feel free to be yourself at American** From the team members we hire to the customers we serve, inclusion and diversity are the foundation of the dynamic workforce at American Airlines. Our 20+ Employee Business Resource Groups are focused on connecting our team members to our customers, suppliers, communities and shareholders, helping team members reach their full potential and creating an inclusive work environment to meet and exceed the needs of our diverse world. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life's journey? Feel free to be yourself at American. EQUAL EMPLOYMENT OPPORTUNITY/ AFFIRMATIVE ACTION POLICY American Airlines maintains a continuing policy of nondiscrimination in employment. It is our policy to provide equal opportunity and access for all persons, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or status as a disabled veteran or other protected veteran, in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations. This policy of nondiscrimination shall include, but not be limited to, the following employment decisions and practices: hiring; upgrading; promotions; demotions or transfers; layoffs; recalls; terminations; rates of pay or other forms of compensation; selection for training, including apprenticeship; and recruitment or recruitment advertising.

Yulista Contract Services LLCRegular PRIMARY FUNCTION The Aircraft Mechanic I inspects, repairs, replaces, and rebuilds components such as flight controls, plumbing and hydraulic units, aircraft structures, landing gear, anti-icing components, pneumatic and hydraulic systems, engines, drivetrain components, auxiliary power units, and ventilation and heating systems. The mechanic uses hand tools, power tools, machines, overhead hoists, and equipment such as external hydraulic power carts and nitrogen servicing carts. The mechanic reads and interprets manufacturer's maintenance manuals, service bulletins, technical data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning and/or damaged components. The mechanic performs scheduled, unscheduled, phase, periodic, and other special inspections. The Aircraft Mechanic may remove and install components such as engines, transmissions, gearboxes, fuel cells and systems, flight control actuators, control rods and cables, hydraulic components, and drivetrain components from an aircraft. They disassemble, clean, and inspect parts for wear, cracks, security, corrosion, foreign object damage, distortions, integrity, or other defects according to technical manuals. They repair or replace defective parts, and reassemble and/or install components in an aircraft. ESSENTIAL FUNCTIONS Job duties may require that the mechanic perform preflight and post-flight maintenance inspections and other miscellaneous duties to service aircraft. These may include flushing gearboxes, cleaning screens and filters, greasing moving parts, checking brakes, and jacking and towing of aircraft. They are responsible for entering any work and inspections performed into maintenance records and are responsible for verifying that their completed work meets applicable standards. The Aircraft Mechanic I may service engines and airframe components to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration. SUPERVISORY RESPONSIBILITIES: This position has no direct reports. KNOWLEDGE, SKILLS, & ABILITIES: QUALIFICATIONS: High School Diploma or equivalent Must have a minimum of 1 year of Aviation Maintenance Experience (an A&P License or a record of Formal aviation maintenance training will be accepted in lieu of experience) Working knowledge of technical publications Must be able to read, write and communicate using the English Language Able to deal with stressful situation while maintaining a professional attitude Must be able to obtain and maintain security clearances and access as required by the contract PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Cities: New York City JFK - NY Intro Are you ready to explore a world of possibilities, both at work and during your time off? Join our American Airlines family, and you'll travel the world, grow your expertise and become the best version of you. As you embark on a new journey, you'll tackle challenges with flexibility and grace, learning new skills and advancing your career while having the time of your life. Feel free to enrich both your personal and work life and hop on board! Why you'll love this job This job is a member of the Line Maintenance Team within the Integrated Operations Division. Responsible for overseeing aircraft maintenance technicians in the repair and return to service of American Airlines' aircraft. Supervisors are front line leaders of people in the safe, compliant and timely return to service our aircraft. They do this by effectively managing the workload, resources, and work relationships of both internal customers & support groups and external regulatory authorities & vendors. Salary Range: $134,000 - $166,000 What you'll do Guides and directs terminal and/or hangar aircraft maintenance through crew chiefs and leads Oversees the implementation of the organization's plans, processes, policies, and procedures Ensures crews are efficiently utilized to accomplish the operation's workload Meets company objectives in accordance with company policies and procedures Responsible for timely and comprehensive communication flow to the workforce Maintains effective work relationships with airport management, FAA, TSA, other government agencies, suppliers, and similar groups Collaborates with other supervisors to accomplish directives and objectives Identifies and takings steps to correct unsatisfactory results Identifies training and development needs of AMTs within span of control Provides effective feedback for crew chief and lead coaching/development Effectively works with union leadership and workforce All you'll need for success Minimum Qualifications- Education & Prior Job Experience High School diploma or GED equivalency 3 to 4 years of aircraft maintenance experience FAA Airframe & Powerplant Certificate Must pass FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA) Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable Preferred Qualifications- Education & Prior Job Experience Associates or Bachelor's degree in business or technical field or equivalent work experience 2 years of a successful track record of management in maintenance and/or production environments 3 years hands-on experience in the repair or manufacture of large transport category aircraft Skills, Licenses & Certifications Knowledge of functional area Knowledge of Microsoft Office to include Word, Excel, Outlook, etc. Ability to supervise management, non-management and contract labor work groups Ability to concurrently handle multiple responsibilities Strong interpersonal and PC skills Ability to concurrently supervise multiple areas of responsibility What you'll get Feel free to take advantage of all that American Airlines has to offer: Travel Perks: Ready to explore the world? You, your family and your friends can reach 365 destinations on more than 6,800 daily flights across our global network. Health Benefits: On day one, you'll have access to your health, dental, prescription and vision benefits to help you stay well. And that's just the start, we also offer virtual doctor visits, flexible spending accounts and more. Wellness Programs: We want you to be the best version of yourself - that's why our wellness programs provide you with all the right tools, resources and support you need. 401(k) Program: Available upon hire and, depending on the workgroup, employer contributions to your 401(k) program are available after one year. Additional Benefits: Other great benefits include our Employee Assistance Program, pet insurance and discounts on hotels, cars, cruises and more Feel free to be yourself at American From the team members we hire to the customers we serve, inclusion and diversity are the foundation of the dynamic workforce at American Airlines. Our 20+ Employee Business Resource Groups are focused on connecting our team members to our customers, suppliers, communities and shareholders, helping team members reach their full potential and creating an inclusive work environment to meet and exceed the needs of our diverse world. Are you ready to feel a tremendous sense of pride and satisfaction as you do your part to keep the largest airline in the world running smoothly as we care for people on life's journey? Feel free to be yourself at American. Cities: New York City JFK - NY Requisition ID: 82835

Power-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Mechanic. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? * Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand). * Experience with ACAD, or similar CAD software. * Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc. * Niagara N4 certification. * Ability to read and interpret blueprints, specifications, and program /design to meet sequence of operations of both design/build projects as well as plan/spec projects. Additional Necessary Qualifications * 3 years of building automation experience required. * Strong understanding of commercial HVAC systems operations. * Ability to read mechanical prints and schematics. * Ability to work independently and in a team setting. * Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook). * Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools. * Mechanical aptitude required. * The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams. * Valid and clean NYS Driver's License to operate company vehicles. * OSHA 30 and site safety training. Physical Requirements * Ability to Stand for 8 Hours * Ability to lift 50 pounds * Ability to work on elevated platforms * Ability to climb ladders * This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 - $100,000/year Benefits * Health Insurance (medical, dental, vision) * PTO Program and Paid Holidays * 401K * EAP We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Northeast Aero is seeking skilled and motivated technicians with a hunger for knowledge and a passion for aviation repair to join our team. We currently have open positions in Pneumatic, Rotating, Fuel, Electro/ Mechanical and Hydraulics. Our ideal candidate is a team player and has a passion for working with their hands, utilizing various tools, materials and specialized testing equipment to test and repair aircraft components in accordance with OEM and/or customer specifications. The technician's responsibilities will be testing, troubleshooting, tearing down and building aircraft components. All positions require knowledge of our procedures as it pertains to processes and documentation. On the job training and oversight is provided by NEACO management. Essential Responsibilities Commitment to company values and ethics Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training. Maintain a clean, clutter-free work area. Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online). Work with co-workers to achieve goals and objectives set by management. Work with management to develop new processes and procedures as necessary. Assist in basic shop upkeep and maintenance including routine cleaning of the technician's work area and periodic shop maintenance assignments. Communicate clearly and effectively with internal and external representatives, including management, customer reps, FAA inspectors, airline inspectors and similar (training provided). Experience and Skills The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check. 2+ of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered. Technician candidate must own his or her own set of basic hand tools. Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering. The ability to follow instructions and work to a written procedure concisely and accurately. Must be fluent in speaking, reading, and writing English. Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required. Interested individuals must be detail-oriented, self-motivated, and highly organized. Experience using a computer. Punctual and reliable. Valid driver's license. Electrical or Mechanical aptitude and hands-on experience. Machinist experience a plus. Physical Requirements The ability to lift up to 50 lbs. The ability to walk up stairs Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other) Constant hand manipulation of small to medium components Sitting or standing for long periods of time Frequent use of hand tools and other repair equipment Use of chemicals for cleaning, lubricating and painting Education High school diploma or GED is required. Associates degree or higher in a related technical field preferred. Trade schooling or related industry experience required. A&P license/certificate is not required (but it is a plus). This position is considered safety sensitive and will be part of FAA DOT Drug Abatement Program so must be able to pass pre-employment and random drug or alcohol testing. Compensation Hourly position commensurate with experience level and skill level and/or certifications. ($24 - $32) We offer medical, dental, vision, life and other insurance options; 401k with 100% match on first 4%; full time workers get paid holidays, vacation & sick/personal leave accrued on hire date. About Us Northeast Aero Compressor is an equal opportunity employer. For more information go to our website at **************

This Is How We Fly At JSX, we're not just a lifestyle carrier - we're a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As an Aircraft Maintenance Technician, you play a critical role in ensuring the safety, reliability, and performance of our aircraft fleet. You will be responsible for performing both scheduled and unscheduled maintenance in full compliance with FAA regulations, company policies, and manufacturer maintenance manuals. Your work directly supports our mission to provide safe and efficient air travel while maintaining the highest standards of operational excellence. A Day in the Life: Your day will be dynamic and hands-on, centered around ensuring every aircraft is flight-ready and impeccably maintained. Typical responsibilities include: Pre-Flight Inspections: Start your day by “waking up” the aircraft, conducting thorough pre-flight checks to ensure all systems are fully operational before takeoff. Post-Flight Inspections: After each flight, you will perform detailed post-flight evaluations to identify and address any issues or wear that may have occurred. Maintenance Logging: All maintenance activities-whether scheduled or unscheduled-are documented in Traxxall and properly signed off in aircraft logbooks, ensuring full traceability and compliance. Hangar Maintenance: You'll help maintain a clean, organized, and safe working environment in the hangar. Why You'll Love This Role: Be Part of a Team That Values You: Join a tight-knit, supportive team of professionals who are passionate about aviation and committed to safety and excellence. No Two Days Are the Same: From troubleshooting to routine checks, you'll enjoy a fast-paced, engaging work environment. Make a Tangible Impact: Your attention to detail and technical expertise directly contribute to flight safety and an exceptional Customer experience. Opportunities to Grow: We're invested in your long-term success, offering ongoing training, certifications, and a clear path to advance your career. What Makes a Successful Aircraft Maintenance Technician? We're looking for someone who is: Critical Thinker: You can quickly assess situations and make sound, safety-first decisions. Detail-Oriented: You understand that precision matters - especially when it comes to aircraft performance. Collaborative: You work well across departments, valuing communication and teamwork to achieve common goals. Organized: You can effectively manage tasks and prioritize under tight timelines without missing a step. Proactive: You don't just react - you anticipate issues and take the initiative to address them before they escalate. Entrepreneurial Spirit: You bring energy, ownership, and creativity to your role, always looking for ways to improve processes and elevate the Customer experience. Required Experience: High school diploma/GED Ability to occasionally lift 75+ pounds Ability to perform intermittent physical activity including bending, reaching, and prolonged periods of standing. Available to work flexible shifts including early mornings, late nights, holidays, and weekends. Participation in initial and random drug and alcohol screenings in accordance with the DOT and FAA guidelines. Ability to operate forklift, boom lift, scissor lift, etc. Ability to taxi and engine run an airplane. Must procure own tool set. Preferred Experience: Prior aircraft maintenance experience. Experience working with AMM, IPC, FIM, etc. for troubleshooting references. Skills, Licenses, & Certifications: Current and valid Driver's license required. Current and valid Airframe and Powerplant Certificate required. Ability to operate in time critical situation with strong attention to detail. Pay & Perks: Compensation is $41-$53/hour. This was established after performing market research and is aligned with our approach to compensation. Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost. Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel other major domestic & international airlines for you and your qualifying immediate family. 401(k) match: 50% of your first 8% Generous PTO: Take time to recharge with our flexible PTO plan. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, or any other characteristic protected by law. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

Job Description This Is How We Fly At JSX, we're not just a lifestyle carrier - we're a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As an Aircraft Maintenance Technician, you play a critical role in ensuring the safety, reliability, and performance of our aircraft fleet. You will be responsible for performing both scheduled and unscheduled maintenance in full compliance with FAA regulations, company policies, and manufacturer maintenance manuals. Your work directly supports our mission to provide safe and efficient air travel while maintaining the highest standards of operational excellence. A Day in the Life: Your day will be dynamic and hands-on, centered around ensuring every aircraft is flight-ready and impeccably maintained. Typical responsibilities include: Pre-Flight Inspections: Start your day by “waking up” the aircraft, conducting thorough pre-flight checks to ensure all systems are fully operational after takeoff. Post-Flight Inspections: After each flight, you will perform detailed post-flight evaluations to identify and address any issues or wear that may have occurred. Maintenance Logging: All maintenance activities-whether scheduled or unscheduled-are documented in Traxxall and properly signed off in aircraft logbooks, ensuring full traceability and compliance. Hangar Maintenance: You'll help maintain a clean, organized, and safe working environment in the hangar. Why You'll Love This Role: Be Part of a Team That Values You: Join a tight-knit, supportive team of professionals who are passionate about aviation and committed to safety and excellence. No Two Days Are the Same: From troubleshooting to routine checks, you'll enjoy a fast-paced, engaging work environment. Make a Tangible Impact: Your attention to detail and technical expertise directly contribute to flight safety and an exceptional Customer experience. Opportunities to Grow: We're invested in your long-term success, offering ongoing training, certifications, and a clear path to advance your career. What Makes a Successful Aircraft Maintenance Technician? We're looking for someone who is: Critical Thinker: You can quickly assess situations and make sound, safety-first decisions. Detail-Oriented: You understand that precision matters - especially when it comes to aircraft performance. Collaborative: You work well across departments, valuing communication and teamwork to achieve common goals. Organized: You can effectively manage tasks and prioritize under tight timelines without missing a step. Proactive: You don't just react - you anticipate issues and take the initiative to address them after they escalate. Entrepreneurial Spirit: You bring energy, ownership, and creativity to your role, always looking for ways to improve processes and elevate the Customer experience. Required Experience: High school diploma/GED Ability to occasionally lift 75+ pounds Ability to perform intermittent physical activity including bending, reaching, and prolonged periods of standing. Available to work flexible shifts including early mornings, late nights, holidays, and weekends. Participation in initial and random drug and alcohol screenings in accordance with the DOT and FAA guidelines. Ability to operate forklift, boom lift, scissor lift, etc. Ability to taxi and engine run an airplane. Must procure own tool set. Preferred Experience: Prior aircraft maintenance experience. Experience working with AMM, IPC, FIM, etc. for troubleshooting references. Skills, Licenses, & Certifications: Current and valid Driver's license required. Current and valid Airframe and Powerplant Certificate required. Ability to operate in time critical situation with strong attention to detail. Pay & Perks: Compensation is $41-$53/hour. This was established after performing market research and is aligned with our approach to compensation. Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost. Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel other major domestic & international airlines for you and your qualifying immediate family. 401(k) match: 50% of your first 8% Generous PTO: Take time to recharge with our flexible PTO plan. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, disability status, or any other characteristic protected by law. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

PL Developments, also known as PLD, is a leading manufacturer, packager, and distributor of over-the-counter (OTC) pharmaceutical products and consumer healthcare goods The Lead Mechanic oversees daily mechanical operations within blister and carton packaging, managing personnel and ensuring all equipment meets cGMP, SOP, OSHA, FDA, and safety standards. This role is responsible for equipment set-ups, repairs, preventive maintenance, troubleshooting, and continuous improvement of production efficiency. Additional responsibilities include training mechanical staff, supporting installation of new vision systems, and performing technical fabrication and repairs. Strong technical expertise, problem-solving skills, and the ability to collaborate across Planning and Quality teams are essential. Work Schedule: Monday-Thursday 7:00am-5:30pm (Overtime on Fridays as needed) JOB QUALIFICATIONS: Bachelor's degree in Mechanical Engineering or related field or 5 years managerial experience in the associated field Knowledge of OSHA, cGMP and FDA guidelines Ability to recognize hazards and take appropriate corrective actions Knowledge of equipment operations and maintenance practices Knowledge of Standard Operating Procedures for equipment operations including safety rules and regulations Expertise in the operation and maintenance of food and/or pharmaceutical equipment Ability to troubleshoot problems with facilities and production equipment. Experience analyzing and troubleshooting problems with equipment, identifying solutions, recommending and implementing methods, procedures and/or techniques for resolution Ability to read and interpret blueprints and schematics Ability to establish and maintain cooperative working relationships Ability to work independently as well as in a team environment POSITION RESPONSIBILITIES: Accountable for the day to day management of blister/carton personnel Responsible for machine related aspects such as packaging projects, equipment maintenance, parts and service Review daily mechanical activities to assure compliance with company cGMP's, and SOP's Oversee daily set-up, repair, and preventive maintenance of packaging equipment in both bottle and blister operation Ensure that each member of the mechanical team is properly trained along with documentation indicating training information Continuous Improvement of Units Per Minute through consistent machine set-ups, proper mechanical maintenance, and personnel training New Packaging Line Design Prepare timelines, line layouts, and review of electrical schematics for new machine installation IQ/OQ review and approval Oversee outside service requirements and contracts negotiations for compressors, plc's, etc Perform installation and set-up of new visions systems as required Knowledge of welding, machine fabrication, and technical repairs Participate in weekly meetings with Planning and Quality PHYISICAL REQUIREMENTS: This position requires regular physical activity, including frequent walking, climbing, bending, kneeling, lifting, stooping, and reaching/working overhead. Candidates must be able to lift, pull, or push up to 75 pounds on a regular basis, safely use ladders up to 30 feet and work at elevated heights and climb ladders with a 300-pound weight limit while carrying a tool bag weighing approximately 20 pounds. The role involves standing and moving for extended periods in a fast-paced production environment and may require working in various temperatures or conditions. Incumbents may be exposed to hazardous materials, gases, electrical components, and equipment. Safety protocols and protective gear are provided. Hourly Range: $40.00-$50.00/hr based on experience. BENEFITS: PLD is a proud employer offering many corporate benefits, including: ⠁ Medical and Dental Benefits ⠁ Vision ⠁ 401K with employer match ⠁ Group Life Insurance ⠁ Flex Spending Accounts ⠁ Paid Time Off and Paid Holidays ⠁ Tuition Assistance ⠁ Corporate Discount Program ⠁ Opportunities to Flourish Within the Company PL Developments is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. #HP1

* Job Type: Support Staff - Union * Bargaining Unit: TWU - B&G * Regular/Temporary: Regular * Hours Per Week: 40 * Standard Work Schedule: Sunday - Thursday, 7:30 am - 4:00 pm * Building: MS General * Salary Range: $36.99 - $46.24 The salary of the finalist selected for this role will be set based on a variety of factors, including but not limited to departmental budgets, qualifications, experience, education, licenses, specialty, and training. The above hiring range represents the University's good faith and reasonable estimate of the range of possible compensation at the time of posting. Position Summary The HVAC Controls Mechanic performs operations as required by job work order and/or blueprint or diagram in preventive maintenance, operation, and repairs to various types of boilers and refrigeration plant equipment used in building heating, ventilation, air conditioning, and refrigeration systems. Responsibilities * Must be experienced in repair and maintenance of all types of pumps; repairs, replaces bearings, bushings, impellers, shafts, couplings, packing, drive belts, and sheaves without direct supervision. * Repairs or fabricates parts using standard machine shop tools. * Performs preventive maintenance of fans, troubleshoots. * Services all types of pneumatic and Electra pneumatic building systems, computer controls interfaces * Performs other related duties as assigned. Minimum Qualifications * High school diploma or equivalent required. * Four years of trade school required, or equivalent combination of education and experience required. * Must have a minimum of two years of technical training in the HVAC field and two years' experience in maintenance and troubleshooting of all control systems. * A total of six years' experience in the HVAC field is required. Preferred Qualifications * NYC refrigeration license is highly desirable. Equal Opportunity Employer / Disability / Veteran Columbia University is committed to the hiring of qualified local residents.

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. The main responsibility of the Service Hub Flex Technician will be to support either the TEB, Teterboro, NJ or HPN, White Plains, NY Service Hubs depending on aircraft demand, this position can be based in either TEB or HPN. What you can expect as an Aircraft Maintenance Technician at West Star: Whether you are replacing or repairing parts, troubleshooting electrical/mechanical/hydraulic and pneumatic systems or performing inspections on some of the most sophisticated civilian aircraft in the world, no day is the same. What is the same, is that each day will bring new experiences and opportunities for growth. You will be ESSENTIAL to many FUNCTIONS including: Performing general mechanical tasks on aircraft and related systems. Removal and installation of panels and components, Troubleshooting and problem solving aircraft system/component issues De-fueling aircraft, Engine removal/installations, Operating ground support equipment, Inspection and evaluation of the aircraft and components Aircraft movement and assistance in performance runs/ taxiing Maintenance and repair of shop facility, equipment and tooling Immediately notify the Lead Mechanic of any problem areas such as parts, materials, workmanship, or airworthiness issues. Provides the Lead Mechanic with a detailed report of work progression and open items to be included in the shift turnover log Proper tagging of Aircraft components, parts, and panels appropriately stored including racks by aircraft. Basic computer skills to be able to navigate electronic training, manuals, and maintenance data bases Willing and able to work rotating shifts including, nights, holidays, weekends and days off. Effectively and clearly communicate (i.e., speak, write, read) in English Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A High school diploma or equivalent, and Airframe and Powerplant License are required. A valid driver's license approved for airline travel and/or a valid passport is ideal Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits.

Job Description Job Posting - Seasonal De-Icing Technician - LGA - Queens, NY Job Type: Seasonal - Full-time and Part-time Shifts (depending on weather) Application Deadline: December 31, 2025 Join the Front Line of Winter Safety in Aviation Aeromag is a leader in aircraft de-icing operations across North America and Europe. As a Seasonal De-Icing Technician, you'll play a crucial role in ensuring the safety and on-time departure of aircraft during winter conditions. Whether you're looking to gain experience in the aviation industry, return for another season, or earn extra income during the winter months, this is a flexible and impactful opportunity. Our technicians choose their shifts based on availability, making this role ideal for students, retirees, or anyone with a variable schedule. Key Responsibilities Safely operate de-icing trucks and equipment near aircraft under winter conditions Apply aircraft anti-icing/de-icing fluids in accordance with procedures and safety protocols Communicate with ground crew, flight crew, and dispatchers Follow airport regulations, security procedures, and safety guidelines Complete required logs and reports after each operation What You Bring Must be available for shift work, including nights, weekends, and holidays Comfortable working outdoors in extreme weather conditions Valid driver's license required (airside license preferred or must be obtained upon hiring) Able to pass security clearance for airport operations (RAIC, SIDA, or equivalent) Prior experience in aviation, heavy equipment, or seasonal work is an asset Why Join Aeromag Competitive hourly wage ($22.50) Paid training and certification provided Flexible scheduling - choose your shifts based on your availability Ideal for those seeking extra income during the winter season Opportunities to return seasonally or grow into year-round roles Be part of a team that makes a direct impact on air travel safety Apply Today Only selected candidates will be contacted for interviews. Aeromag is an equal opportunity employer and values diversity in its workforce.

Job Description Job Posting - Seasonal De-Icing Technician - JFK - Queens, NY Job Type: Seasonal - Full-time and Part-time Shifts (depending on weather) Application Deadline: December 31, 2025 Join the Front Line of Winter Safety in Aviation Aeromag is a leader in aircraft de-icing operations across North America and Europe. As a Seasonal De-Icing Technician, you'll play a crucial role in ensuring the safety and on-time departure of aircraft during winter conditions. Whether you're looking to gain experience in the aviation industry, return for another season, or earn extra income during the winter months, this is a flexible and impactful opportunity. Our technicians choose their shifts based on availability, making this role ideal for students, retirees, or anyone with a variable schedule. Key Responsibilities Safely operate de-icing trucks and equipment near aircraft under winter conditions Apply aircraft anti-icing/de-icing fluids in accordance with procedures and safety protocols Communicate with ground crew, flight crew, and dispatchers Follow airport regulations, security procedures, and safety guidelines Complete required logs and reports after each operation What You Bring Must be available for shift work, including nights, weekends, and holidays Comfortable working outdoors in extreme weather conditions Valid driver's license required (airside license preferred or must be obtained upon hiring) Able to pass security clearance for airport operations (RAIC, SIDA, or equivalent) Prior experience in aviation, heavy equipment, or seasonal work is an asset Why Join Aeromag Competitive hourly wage ($22) Paid training and certification provided Flexible scheduling - choose your shifts based on your availability Ideal for those seeking extra income during the winter season Opportunities to return seasonally or grow into year-round roles Be part of a team that makes a direct impact on air travel safety Apply Today Only selected candidates will be contacted for interviews. Aeromag is an equal opportunity employer and values diversity in its workforce.

Working at Breeze Airways is an exciting endeavor and a serious commitment to bring “The World's Nicest Airline” to life. We work cross-functionally with truly awesome Team Members to deliver on our mission: “To make the world of travel simple, affordable, and convenient. Improving our guests travel experience using technology, ingenuity and kindness.” ***$10,000 Cash Bonus will be awarded after a 12 month commitment to Breeze*** $5,000 after six months $5,000 after 12 months **Our BDL AMTs also receive a stipend of $800 a month** Breeze is hiring- join us! Breeze Airways is the newest, nicest, fastest growing airline with maintenance bases in Windsor Locks, CT (BDL), Charleston, SC (CHS), New Orleans, LA (MSY), Norfolk, VA (ORF), Provo, UT (PVU), Tampa, FL(TPA), Providence, RI (PVD), Orlando, FL (MCO), Fort Myers, FL (RSW) and Raleigh-Durham, NC (RDU)! Breeze is looking for great and experienced talent. Your entry pay will be based on your experience and our established criteria. Year Hourly Pay 1 $30.50 2 $31.00 3 $31.50 4 $34.50 5 $36.00 6 $37.00 *$2.00 shift differential added when working from 9:00PM - 7:30AM The Aircraft Maintenance Technician (AMT) is responsible for performing maintenance, preventative maintenance, and alterations of Breeze aircraft, including troubleshooting, performing run-up and taxi procedures, and signing mechanical flight releases. The Aircraft Maintenance Technician reports to a Line Maintenance Supervisor and carries out instructions as assigned in accordance with FAA regulations and Breeze policy and procedures. As certified AMTs, you have an important role to ensure the safety of our fellow Breeze Team members and Guests as well as the airworthiness of our fleet. Here's what you'll do Perform all assigned maintenance duties in accordance with the Breeze General Maintenance Manual (GMM) Responsible and accountable for all work performed Complete all appropriate Breeze forms on all work assigned and performed Properly handle all parts, units, assemblies, and aircraft while in the repair process Ensure that all documentation is kept current as to open discrepancies and completed corrective actions Complete all associated and required documentation for all maintenance work performed or inspections conducted accurately and correctly Submit personal OJT Task Cards on time and accurately Maintain the work area in a safe, clean, and operative condition and ensure all tools are accounted for at completion of all assigned tasks Properly care for and use tooling and equipment used for aircraft maintenance Notify the Maintenance Supervisor and all other appropriate Team Members of any condition that would compromise the airworthiness of Breeze aircraft Maintain a valid Airframe & Powerplant (A&P) Certificate, or Repairman Certificate, and keep the certificate available for inspection by the FAA, NTSB, or Breeze Supervisor/Manager Perform other duties and tasks as assigned by Maintenance Leadership, MOC, and/or DOM Achieve performance measures and adhere to established standards in conjunction with Breeze Aviation Group Values of Safety, Kindness, Integrity, Ingenuity and Excellence Here's what you need to be successful Minimum Qualifications Must hold a current, valid FAA Airframe and Powerplant License (A&P) with no history of infractions and recent experience on commercial aircraft types Ability to read and interpret aircraft maintenance manuals and specifications Must have a valid driver's license Must be at least 18 years of age High school diploma or equivalent educational achievement Must have a valid passport with no travel restrictions Must have authorization to work in the US as defined by the Immigration Reform Act of 1986 Must have the ability to travel unrestricted to and from the United States Must be flexible and willing to work all shifts to support a 24/7 operation. Must be willing to travel 20% of the time Must be willing to work with other departments within the company as needed Must pass a DOT pre-employment drug test Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check Preferred Qualifications Understanding and working knowledge of FAA regulations including FAR part 121 operations Experience maintaining Embraer E-Jet and/or Airbus A220 family aircraft Familiar with an airline Maintenance Information System (MIS) such as TRAX Degree in Aerospace, Aviation Maintenance or Business Degree preferred Skills/Talents Skills in Microsoft Office Suite (Word, Excel, Outlook) Must be fluent in English Exemplifies Breeze's safety culture, values, and mission Excellent oral and written communication skills Excellent problem-solving skills Ability to work with individuals and teams at all levels in the organization Perks of the Job Health, Vision and Dental Health Savings Account with Breeze Employee Match 401K with Breeze Employee Match PTO Travel on Breeze and other Airlines too! Breeze Airways provides equal employment opportunities to all Team Members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Breeze Airways will never request your Social Security Number, Driver's License or Date of Birth on our job postings. Job Postings requesting any or all of this information should be regarded as a scam. To ensure you are applying to an actual Breeze Airways posting, please apply online at ***************** then click “Careers” at the bottom of the page.

Perform assembly, installation, maintenance, layout, repair or modification operations necessary to fabricate, join or otherwise manufacture aircraft lots, line and major assemblies, section and complete aircraft. Requires training and constant oversight by more experienced personnel in order to accomplish designated elements/tasks within the statement of work. Training to last a minimum of 18 months or at the discretion of the manufacturing supervisor. Essential Functions * Perform a variety of structural assembly and riveting operations involving details, sheet metal parts, extrusions, castings and forgings in the fabrication of minor, sub and major assemblies and components. * Perform fitting and rework operations as required to meet production standards. * Perform assembly operations with or without the use of production jigs and fixtures when accessibility is not a major problem. * Shear, file, tap, ream and drill to close tolerances. * Maintain Quality, Schedule and Cost standards. * Work from Blueprints, Work Instructions and Engineering Specifications. * Notify supervisor of any/all malfunctions, defect and damages of equipment, material and product. * Adhere to all applicable Environmental, Safety, Health, FOD and Operations Procedures/Directives. * Perform other duties as required. * Perform Production Accountability duties associated with the processing, verification, quality auditing, and inspection of assemblies, parts and tooling, for which the individual has been delegated production accountability Qualifications * 0-2 years' experience * High School Diploma or equivalent * Ability to lift, carry and handle objects weighing 25-30 pounds * Lifting, standing, sitting, stooping, bending, grasping, holding, reaching, pushing and pulling are generally required to perform the functions of this position The salary range for this position is: $36,400-$45,000. Actual compensation will be dependent upon the individual's skills, experience, qualifications and other factors allowed by law. Individuals are not typically hired at or near the top of the salary range. For immediate consideration for this position, please e-mail your resume and cover letter with salary requirements to **********************. Please ensure that the Reference Code is included in your correspondence. CPI Aero considers all qualified applicants for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status. Back to Careers Page CPI Aerostructures, Inc. 91 Heartland Blvd. Edgewood, NY 11717 ************** Follow Twitter LinkedIn Facebook

Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Job Type: Contract-to-Hire Per Diem: $870 USD per week, applicable to employees residing more than 150 miles from the Service Center. A&P Mechanics play a key role in maintaining the safety and efficiency of customer aircraft. You'll troubleshoot, repair, inspect, and perform maintenance tasks while working closely with clients to find solutions. Troubleshoot, repair, install, inspect, and maintain aircraft. Document work per manuals and regulatory requirements. Follow safety and Environmental Health & Safety policies. Participate in 5S activities to maintain a clean workspace. Operate ground support equipment as required. Perform mechanical/electrical component removals and installations. Provide off-site maintenance support when needed. Assist with fueling, engine removal/installation, and component repairs Qualifications Valid A&P license by the FAA 3 years of corporate experience (Bombardier and Gulfstream preferred) Own basic hand tools and manage tool inventory. Ability to interpret mechanical engineering drawings. Must obtain required Ground Support Equipment qualifications. Willing to work unscheduled overtime, including weekends and holidays. Able to work outdoors in all weather conditions. Basic PC skills. Ability to obtain a SIDA badge (if applicable). US Citizenship or authorized to work in the U.S. without visa sponsorship Additional Information Here's a heads-up of the upcoming steps: Phone Interview with Recruiter: We'll begin with an introductory call to discuss your background and interest in the role. Interview with the Hiring Manager Offer Letter: We´ll extend you an offer and start the onboarding process. Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions You start your next challenge! Segula offers a comprehensive benefits package to all Full-Time Employees. New Hires are eligible for benefits on the 1st day of employment. Medical ,Dental and Vision coverage Employee life insurance Short & Long-Term Disability Voluntary Term Life, AD&D, & Critical Illness 401(K) with a Segula match

Job Description Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award-winning organization, is currently looking for an experienced, certified Aircraft Maintenance Technician (AMT) to join our team! This position will be responsible for performing routine inspections, troubleshooting, and repairs including airframe structures, engines and aircraft systems. The Aircraft Maintenance Technician (AMT) will make repairs and conduct tests to keep equipment operating efficiently and safely. Please note, this position may require working nights. This position is located in Bridgeport, Connecticut. DUTIES & RESPONSIBILITIES Perform all airframe and powerplant repairs and modifications required to meet company and FAA requirements Remove and disassemble defective parts; assemble and install of replacement parts and testing aircraft system Operate all power tools and equipment necessary to accomplish job assignments Complete all required maintenance records in an accurate manner to include accurately reporting of times required to accomplish the tasks assigned Must support all company policies and safety programs to include OSHA and EPA regulations Interpret technical manuals, drawings and blueprints Present a clean and neat work area Demonstrate professionalism and deliver satisfaction to the internal/external customer Perform other related duties & responsibilities as assigned EDUCATION & EXPERIENCE FAA Airframe & Powerplant License is required 2-4 years directly related aviation experience (corporate aircraft experience preferred) At least 2 years of fleet type experience desired Good working knowledge of Federal Aviation Regulations (FAR) Part 145, 135, 121 Sheet metal experience is preferred but not required REQUIRED SKILLS Successful candidate will be highly motivated and work effectively under pressure and time constraints Must have the ability to multi-task within a team environment Strong working knowledge of Windows and MS Office programs Possess proven inspection competencies Must be detail-oriented and well organized; demonstrate excellent communication skills, and a positive attitude Specialized aircraft tooling will be furnished by the company Ability to pass background check for airport security badge WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.