Aircraft mechanic jobs in Port Arthur, TX - 995 jobs

Repair, operate, rehab and provide general mainteance to park rides and equipment. Responsibilities: Repair, operate, rehab and provide general mainteance to park rides and equipment. Qualifications: SKILLS AND QUALIFICATIONS: One to two years of maintenance experience involving industrial or heavy equipment maintenance and mechanical repair procedures. Should have a varied skillset including knowledge of general maintenance, welding, and machine shop repair. Must be able to work varied shifts, days, and nights and weekends including extended hours when required. Must be willing to work under various weather conditions. Must be physically able to climb stairs and ride units with heights of 50 feet or more. Must be able to lift up to 50 pounds and stand for extended periods of time. Must be able to stoop, bend and lift regularly. Must be self-motivated and able to perform tasks with minimal supervison. Must be at least 18 years of age and possess a high school diploma or equivalent. Able to provide own basic hand tools. Must possess a valid driver's license, a good driving record, and successfully complete all authorized employment schreenings and criminal background checks.

M1 Support Services, LP 300 N. Elm Street, Suite 101 Denton, TX 76201 m1services.com Aircraft Mechanic (SAM-UPT-0474) Job Posting No 113732 outside bar) to the bottom of the page and click on the "Apply for this position" button. Start Date 11/24/2025 Contract Sheppard Aircraft Maintenance Salary Range $44.14 Hour Posting Date 11/ 05/2025 Union Yes FLSA Status Non-Exempt Shift Work 3rd FT/PT Full-time Relocation No Travel Possible Job Summary: M1 is looking for an Aircraft Mechanic with the following knowledge and experience: Primary responsibilities include but are not limited to the following: * Uses schematic diagrams, drawings, charts and technical publication in operating, testing removing, troubleshooting and replacing aircraft system components to include remove and install engines as required. * Complies with the requirements of the FOD prevention, housekeeping, tool control, environmental and safety programs. * Performs aircraft conditional inspections. * Performs all required aircraft servicing tasks. * Operates ground support equipment and documents/reports discrepancies prior to use. * Performs all tasks associated with ground movement of aircraft. * Completes all necessary manual and automated records required by USAF and Company directives. * Orders parts and supplies as needed. * Follows technical data, manuals, regulations, and other maintenance directives as required. * Performs other related duties as assigned. * Participates in towing and movement of aircraft in performing maintenance activities. Qualifications and Experience: Knowledge: * A working knowledge of jet aircraft systems and of the use of common aircraft hand tools and special tools is required. A working knowledge of aircraft maintenance safety requirements and the operation of portable fire- fighting equipment are required. Education: * Completion of high school or the equivalent is required. Completion of specialized courses is desired. * The ability to read and write and to comprehend technical data is required. Experience: * Eighteen (18) months of general aircraft maintenance experience is required. One (1) year experience in the past three (3) calendar years' on applicable aircraft or completion of a specific aircraft familiarization course is required. * Possession of a valid driver's license is necessary to obtain flight line driving privileges Page 2 of 2 Working Conditions: * Environment ranges from office to hangar and flight line and requires extensive climbing, standing, stooping, bending, pushing, kneeling, stretching, and walking demands. * Must be able to stand for long periods of time. * Must be physically capable of performing all assigned duties. * Normal color vision is required. * A physical is required for personnel working in fuel cell maintenance. Must be able to enter the smallest cell opening, must be able to become qualified for and use a respirator. * Must be able to lift a minimum of 50lbs M1 Support Services, headquartered in Denton, Texas provides a variety of professional, technical, and maintenance services to the Department of Defense and government agencies. M1 Support Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability, or veteran status. M1 Support Services offers a comprehensive benefits package including several options for Medical, Dental, Vision, Life and Dependent Life, AD&D, Short-and Long-term Disability. We also offer Flexible Spending Accounts for qualified health and dependent care expenses, as well as a free Employee Assistance Program.

Akkodis is seeking of an Aircraft Layout Specialist for a Direct Hire/Permanent role with one of our Industry leading Client in Gainesville, TX. The ideal candidate would have a minimum 3-5 years of experience in generating 2-D aircraft layouts from 3-D geometry using AutoCAD. Salary Range: $65K - $75K per annum with benefits + 8% yearly bonus, (the salary range may be negotiable based on experience, education, geographic location, and other factors). Objective: Under moderate supervision, responsible to create and update Aircraft Installation Drawings (ACI), Aircraft Configuration Drawings (Config), Trim & Finish Drawings (T&F), and other drawings related to Aircraft Interiors. The Aircraft Layout Specialist will work closely with Project Engineers, Design Engineering, Certification, Marketing, and others to complete tasks within the definitions of the airframe manufacturer and airline specifications, regulatory requirements, and SSUSA requirements. Essential Functions (Duties and Responsibilities): Generate 2-D aircraft layouts from 3-D geometry Modify existing ACI, Config, and T&F Drawings, create new drawings, as required. Assist Marketing Department with Aircraft Layouts and other geometry as needed. Provide Design and Drafting Support to Project Engineering Performs other duties as assigned. Qualification Requirements- Education & Qualification: Must have a Bachelor's Degree in Design, Engineering or Architecture. Must have an Associate's Degree in Design, Engineering, or Architecture (minimum of 3 years equivalent related experience will be considered in lieu of Associates degree) . Work Experience - Technical knowledge: Plus additional 5 years of related experience required with Associated degree. Plus additional 2 years of related experience required with Bachelors degree. Formal training in reviewing and interpreting Layout of Passenger Accommodations (LOPA) preferred. Formal training in AutoCad required; Formal training in ProEngineer and CATIA preferred. Professional Skills- Expert in the use of AutoCad, with the ability to use geometry from CATIA, and ProEngineer, IGES, STEP, and .DXF sources Thorough understanding of standard aircraft interior layout design practices and standards, including FAA Regulations and Airframer requirements Requires communication skills that will provide productive interface between Engineering, Program Management, Certification, and Manufacturing. Must have the ability to generate written communication and to operate required office equipment. Ability to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English. Behavioral Skills- Must be able to work effectively within a geographically disperse team and multicultural team environment. Must have strong relationship building and management skills. Comfortable with ambiguity and limited instruction. Must be comfortable with working multiple tasks simultaneously. Must be able to interact successfully with engineering functions, sales and marketing groups. Desirable Aspects- Experience in aircraft interiors environment and applicable OEM specifications and regulations. AutoCAD for 2D applications. CATA V5, Smarteam Formal training in ProEngineer and CATIA preferred. Formal training in reviewing and interpreting Layout of Passenger Accommodations (LOPA) preferred. Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act. · Los Angeles City Fair Chance Ordinance. · Los Angeles County Fair Chance Ordinance for Employers. · San Francisco Fair Chance Ordinance Thanks & Regards Aditya Agnihotri [Aadi] Sr. Recruiter Email: ********************************* Direct: **************** LinkedIn: ********************************************************

Hands-on experience with Rating Engine in the Property & Casualty (P&C) insurance domain. Expertise in rating frameworks and integration frameworks, ensuring accurate and efficient pricing solutions. Proficient in version control systems (Git) and CI/CD tools for streamlined development and deployment. Skilled in system integrations using SOAP/REST APIs and messaging protocols for seamless connectivity. Design and implementation: Design, configure, and implement rating and product model changes within PNC Domain Knowledge. Develop and maintain rate books, rate tables, and rate routines with rating mechanism Work closely with business analysts and solution architects to translate business requirements into technical solutions. Integrate the rating engine with other systems, such as billing, claims, and external rating services. Perform unit and regression testing, document rating configurations, and maintain change history. Ensure configurations adhere to PNC best practices and version upgrade standards. Strong proficiency in rating mechanism programming.

Join a Global Leader in Workforce Solutions - Net2Source Inc. Who We Are Net2Source Inc. isn't just another staffing company, we're a powerhouse of innovation, connecting top talent with the right opportunities. Recognized for 300% growth in the past three years, we operate in 34 countries with a global team of 5,500+. Our mission? To bridge the talent gap with precision-Right Talent. Right Time. Right Place. Right Price. Job Title: A319 Retrofit Interiors Engineer Location: Fort Worth, TX Duration: 12 months Pay Range: $55 - $60/hr Job Description: This position is to provide support to cabin electrical, IFE, and WIFI systems. Support repair and alterations of the cabin electrical systems via EO or EA. • Working with other engineering teams, create or revise task cards, AMM, IPC, AWDM, and CMMs for cabin electrical systems. • Investigate and develop fixes for reliability items on cabin electrical systems. • Work with suppliers and OEMs to develop alterations to existing systems, including possible removal and replacement of a system or component to support ongoing efforts. • Support line operations by review of daily out-of-service aircraft or degraded systems and provide technical support. Qualifications: • BS is Engineering (required, not Engineering Technology and not Engineering Management), Electrical Engineering preferred. • Ten or more years of experience in aircraft In-Flight Entertainment, WiFi, or aircraft cabin electrical systems. • Experience with airline processes and procedures. Airlines experience preferred. • Must have good interpersonal skills, work well with others in a group, and be self-motivated and able to prioritize workload and multiple high-priority items. Why Work With Us? We believe in more than just jobs-we build careers. At Net2Source, we champion leadership at all levels, celebrate diverse perspectives, and empower you to make an impact. Think work-life balance, professional growth, and a collaborative culture where your ideas matter. Our Commitment to Inclusion & Equity Net2Source is an equal opportunity employer, dedicated to fostering a workplace where diverse talents and perspectives are valued. We make all employment decisions based on merit, ensuring a culture of respect, fairness, and opportunity for all, regardless of age, gender, ethnicity, disability, or other protected characteristics. Awards & Recognition • America's Most Honored Businesses (Top 10%) • Fastest-Growing Staffing Firm by Staffing Industry Analysts • INC 5000 List for Eight Consecutive Years • Top 100 by Dallas Business Journal • Spirit of Alliance Award by Agile1 Ready to Level Up Your Career? Click Apply Now and let's make it happen.

Axis Rental Solutions, founded in September 2014, provides essential RENTAL tools and equipment for various industries including construction markets to ensure projects are completed safely, on time, and within budget. Based in Houma and Broussard, Louisiana and Nederland, Texas, Axis serves the entire Gulf Coast with a team that boasts decades of rental equipment experience. We offer comprehensive solutions that include project planning and preparation, underlined by our strong commitment to safety through in-house programs, SEMS package, and quality checklists. Our mission is to function effectively and safely in harsh environments while ensuring customer satisfaction through our cutting-edge concern resolution process. Role Description This is a full-time, mechanic position in Nederland, TX. 3 years experience preferred. Competitive pay and benefits package.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: Top SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, but they're also making history. Are you ready to put your experience to work at Northrop Grumman? If so, we are seeking experienced Quality Inspectors to support our E-6B maintenance program, along with other programs possibly. These position are located in Lake Charles, LA. You will serve as a Inspector, SCA Aircraft Mechanic III. The Navy E-6 is an airborne command post and communications relay based on the Boeing 707 platform The aircraft are utilized primarily for long-range patrols along the entire U.S. border, and in source and transit zone countries. This platform, now modified to the E-6B standard, conveys instructions from the National Command Authority to fleet ballistic missile submarines, a mission known as TACAMO ("Take Charge And Move Out"). Shift Requirements: Days, Nights and Weekends **These are Service Contract Act positions. Your duties will include: Inspects mechanical final assembly installations of the aircraft such as fuselage, wings, flaps, landing gears, and tail assemblies. Inspects systems such as hydraulic, pneumatic, oil, heat, and brakes. Visually and physically inspects electrical installations. Rechecks work after adjustment or repair. May monitor and verify quality in accordance with statistical process or other control procedures. Maintains necessary inspection logs and writes inspection reports. Additional responsibilities include, but are not limited to: Coordinate, update and maintain QMS policies and procedures to accommodate ever-changing business conditions Host and coordinate with the external QMS certification agency during the annual QMS certification audit Support audit coordination as applicable including strategy, logistics and execution in order to achieve smooth and successful audit processes Responsible for the internal audit program and ensuring all action items are processed in a timely manner compliant with processes and regulations Facilitate audit-finding owners to ensure all required implementation activity is completed correctly, and on time and in accordance with procedures Participate in Supplier Qualifications Assist in processing MRB and Corrective Actions with focus on performance trends and timely closure Analyze and present performance results relating to Quality Assurance for visibility in areas of weakness needing improvement to drive operational excellence Provide QMS process training to new hires and as needed across the organization Develop, deploy, and audit program Quality Plans as contractually required Basic Qualifications: High School Diploma or equivalent (GED) and a minimum of 10 of relevant experience. Able to perform work in an approved environment during specified work hours. Able to change physical locations based upon need (including physical ability to travel). Ability to be subject to a variety of physical conditions. Able to wear respirator or other safety gear. Ability to be subject to areas which could cause various phobias due to height or closed spaces. Able to obtain/maintain a Secret DoD clearance. Able to work/change shifts based on the needs of the program. Preferred Qualifications: A&P License. E-6B experience. Experience performing major aircraft modifications. Primary Level Salary Range: $36.95 - $36.95The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic III st Bn, 5 th Avn Regt) Aircraft Mechanic III (23023): Leads a team in the performance of aircraft maintenance, inspections, and scheduled / unscheduled maintenance. Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. Capable of performing, supervising and inspecting the duties of Mechanic Is, IIs and IIIs. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. ADDITIONAL QUALIFICATIONS: - All mechanic IIIs will possess either a FAA license or equivalent military service school certificate of training in aviation maintenance. - A minimum of one Mechanic III shall be familiar with the operation and maintenance of the Aircraft Notebook (ACN), Intervehicle Health Monitoring System (IVHMS), and Enhanced Digital Ground Station (EDGS) servers that US Army aircraft data is stored on, as well as knowledge/familiarity of the software updates and software maintenance required to maintain the system in working order. This Mechanic III will adhere to all requirements and certifications as outlined in DoDD 8570.01, DoD 8570.01-M and AR 25-2. - One Mechanic III shall have experience to conduct HAZMAT/ OSHA inspections to ensure contractor maintenance program is in compliance with OSHA standards, as well as handle, issue, and manage HAZMAT materials/ pharmacy in support of CFT maintenance effort. In addition, the mechanic shall conduct spill response training and be responsible for confined space entry training/certification and all OSHA required training for CFT members. In addition, the mechanic shall manage and issue all Government furnished personal protective equipment (PPE). - One shall have the experience to oversee the Quality Assurance (QA) shop. - Two shall have the experience to oversee the Production Control (PC) shop. TASK REQUIREMENTS: Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, hydraulic, engines, auxiliary power unit, and ventilation and heating systems. Repair, replace, and rebuild aircraft structures, such as fuselage and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, rivet gun and drills. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Use chemical treatment process to etch and alodine parts. Use chemical sealants. Requisition repair parts, materials, and consumable supplies through military supply system. Lead and direct small maintenance teams. Perform other tasks as directed. PREFERRED QUALIFICATIONS: H-60 qualification and/or experience. Five to ten years leadership experience. Eight or more years' rotary wing experience. Familiarity and ability to use Microsoft Office. Familiarity and ability to use military tech manuals. Familiarity and ability to use Standard Army Management Information Systems. BASIC QUALIFICATIONS: Must be a graduate of one of the following Military Aviation Powertrain and/or General Repair, Hydraulic, Engine, Avionics and Sheet Metal Qualification Courses or civilian equivalent. At least five years of experience on military rotorcraft. Must be able to work 1st, 2nd or 3rd shift schedule as required. Must be able to work flexible work-week schedules i.e. M-F, Tues-Sat, Sun-Th or as required. Must be able to pass a background check. Must be able to obtain a favorable National Agency Check. Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must have own tools. Must be able to deploy to support off station exercises and perform other support duties as assigned. Compensation $41.33/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

JOB TITLE: Aircraft Mechanic II - Free Housing Support PAY RATE: $47-50/hour MUST BE US PERSONS We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Job Details: Contract Length: 12 months (opportunity for extension) Benefits: Medical, dental, and vision coverage through Cigna Perks: Bonus potential and priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: Up to two weeks, if applicable (terms and conditions may vary). Summary: Perform structural repairs and modifications on aircraft, including flight controls, hydraulics, and fuel systems. Read and interpret blueprints, technical orders, and manufacturer manuals for repair work. Utilize specialized tools such as torque wrenches, micrometers, and sheet metal brakes. Maintain technical certifications and follow strict safety protocols. Work various shifts, including weekends and overtime, as needed. This is a non-managerial, non-leadership role. Required Skills: 4+ years of heavy aircraft structures experience (clearly list aircraft platform experience on resume). Expertise in close tolerance drilling, reaming, removal, and installation of critical structures (e.g., doublers, triplers, seat tracks, stringers). Ability to obtain customer approval for aircraft access (Dual citizenship may affect eligibility). Physical Requirements: Must be able to climb ladders, work in confined spaces, and lift up to 35 lbs. Exposure to noise and elevated platforms, requiring PPE use. Desired Skills: Experience with VIP or specialty aircraft interiors. Depot-level/heavy structures maintenance experience. FAA Airframe and/or Powerplant certification (preferred). About Us: The Structures Company is a premier national staffing firm specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we provide professionals with opportunities to excel in the aviation and aerospace industries. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: aerospace, aviation, engineering, maintenance, aircraft design Take your aerospace career to new heights-apply today!

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

Duties & Responsibilities Essential Job Functions: A&P Mechanic: An A&P certified mechanic is responsible for ensuring the aircraft are maintained in accordance with applicable Maintenance Manuals, Federal Aviation Regulations, Service Bulletins, & Airworthiness Directives. Have thorough knowledge of Federal Aviation Regulations, Aircraft Maintenance Manuals, Safety Regulations (both Federal and State), and current Industry Standards. Perform Scheduled/Unscheduled Inspections, Repair, & Troubleshooting on Hydraulic, Pneumatic, Drivetrain, Electrical & Structures systems. Ordering appropriate aircraft parts and consumables while maintaining current inventory. Ensuring replacement parts are airworthy prior to installation according to manufacturer documents and have correct FAA airworthiness paperwork. Inspection Authorization: An IA may inspect and approve for return to service any aircraft or related part or appliance after a major repair or major alteration. Also, the holder of an IA may perform an annual inspection and he or she may supervise or perform a progressive inspection. Pilot: Perform Maintenance troubleshooting and Return to Service ground-runs and flights according to applicable aircraft ratings. As necessary perform functions of a Tactical Flight Officer during Helicopter Operations. Additional Duties: Keep the Hangar maintained by regular cleaning and performing appropriate facility maintenance. Perform Maintenance on aircraft Ground Support Equipment Perform grounds keeping as necessary. Provide assistance to SWAT Dept. by assisting with MRAP Maintenance as needed. Other Job Functions: Performs other job related duties as directed. NOTE: The above describes the general nature and level of work being performed by employees holding this position. This is not intended to be an exhaustive list of all duties and responsibilities required nor are all duties listed necessarily performed by any one employee so classified. Education & Experience Education & Experience: High School diploma or GED; advanced technical skills and knowledge obtained by specialized training, formal education and /or extensive on the job training in aviation and mechanics. Specialized Requirements: Applicable Pilot's Certificate, FAA Airframe and Power Plant certificate, FAA inspection authorization, Valid Texas Drivers License Knowledge, Skills, & Abilities Equipment Used: Office equipment, precision calibrated tools, specialty tools related aircraft, basic hand tools, electrical diagnostic tools, and other related aircraft maintenance tools. Knowledge, Skills, & Abilities: Ability to read and understand specific guidelines; effective verbal and written communication skills; good interpersonal skills in order to deal effectively with all levels of employees, county officials, contractors, vendors, and suppliers, problem solving skills, advanced knowledge of federal aviation regulations and state and federal safety procedures. Work Situations/Demands/Efforts: Work requires organizing; prioritizing; accuracy; attention to detail; working individually and as part of a group; flexibility in order to perform and coordinate a variety of duties; performing routine, repetitive duties. Dealing with unexpected and/or emergency situations; driving a vehicle (truck); operating machinery; possible irregular hours; occasional out-of-town travel to attend schools and educational seminars. Employee works independently; requires assistance only with solving unusual non-routine problems. Working Conditions: Work is performed primarily in a semi-climate controlled aircraft hangar. Employee may be subject to adverse weather and environmental conditions; noise and vibrations; machinery and equipment with moving parts; adverse atmospheric conditions from dust, fumes, chemicals, paint, etc. Physical Requirements: Job duties require regular walking and standing; working with tools, electrical equipment, machinery; climbing ladders.. Duties also require heavy work such as moving objects weighing 50 lbs or more. Appropriate safety precautions must be observed. Jefferson County is an equal opportunity employer. The County does not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status (disabled), genetic information, sexual orientation, gender identity or expression, or political affiliation in employment or the provision of services. To request a reasonable accommodation or other assistance, contact a Human Resources representative at **************, or for the hearing impaired, through RELAY Texas at ************** or mail your request to 1225 Pearl St., Suite 201 Beaumont, Texas 77701. The Sheriff's Office offers a competitive benefits package including; vacation, sick, holiday, personal and military leave; medical, dental, and vision insurance after 90 days; deferred compensation plan; overtime; mandatory retirement contribution to the Texas County and District Retirement System at 7% with a 2:1 match; education, bi-lingual, and longevity pay under contract; flexible spending accounts; life insurance; long-term disabiltiy; prescription drug coverage; Employee Assistance Program; and use of the Employee Health Clinic. Employer Jefferson County (TX) Department Sheriff's Office Address 5030 US-69 Beaumont, Texas, 77705 Phone ************** Website ***********************************

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: NoneTRAVEL: Yes, 25% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, but they're also making history. Northrop Grumman is seeking experienced Avionics Aircraft Mechanics to support a maintenance program with Northrop Grumman in Lake Charles, LA. The Navy E-6 is an airborne command post and communications relay based on the Boeing 707 platform The aircraft are utilized primarily for long-range patrols along the entire U.S. border, and in source and transit zone countries. This platform, now modified to the E-6B standard, conveys instructions from the National Command Authority to fleet ballistic missile submarines, a mission known as TACAMO ("Take Charge And Move Out"). *These positions are Service Contract Act positions. **These positions are Contingent upon Funding. Your duties include, but are not limited to: Use your thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. Adjusts, repairs, or replaces electrical wiring system and aircraft accessories. Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Use your detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. Read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc. Applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Use your thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Have basic knowledge of electrical theory. Use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, etc. Assemble, modify, and install wire bundles, conductors and other electrical components. Job duties may also require that this mechanic: Maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty. Use your experience and ability to provide technical support to structural/mechanical engineers and customers alike Use a broad knowledge of aircraft sheet metal/structural modifications and repair. Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Performs preflight, thru-flight, and post-flight maintenance inspections. Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This worker will be required to make entries in aircraft logs and records, and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Basic Qualifications: High School Diploma or equivalent (GED) and a minimum 10 years relevant aircraft Avionics experience. Able to perform work in an approved environment during specified work hours. Able to change physical locations based upon need (including physical ability to travel). Ability to be subject to a variety of physical conditions. Able to wear respirator or other safety gear. Ability to be subject to areas which could cause various phobias due to height or closed spaces. Preferred Qualifications: A&P License. E-6B/707 experience. Able to obtain/maintain a Secret DoD clearance. #LCSpring2026 Primary Level Salary Range: $36.95 - $36.95The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic II (UH-60) st Bn, 5 th Avn Regt) Aircraft Mechanic II (23022): Aircraft Mechanics II must have a combination of experience to repair engines, sheet metal, and structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Additionally provides input to Maintenance Engineering Changes (MEC), Estimated Cost of Damage preparation (ECOD) and assist in the recommendation of changes to (MWO). Individuals must be able to prioritize workloads and are required to lead teams through more complex aircraft relevant tasks. Mechanic IIs can inspect Mechanic IIs and Is. This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as blueprints or manufactures' manuals. Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. ADDITIONAL QUALIFICATIONS: - All Mechanic IIs will possess either a FAA license or equivalent military service school certificate of training in aviation maintenance. TASK REQUIREMENTS: Troubleshoot malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, hydraulic, engines, auxiliary power unit, and ventilation and heating systems. Repair, replace, and rebuild aircraft structures, such as fuselage and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, rivet gun and drills. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Use chemical treatment process to etch and alodine parts. Use chemical sealants. Requisition repair parts, materials, and consumable supplies through military supply system. Lead and direct small maintenance teams. Perform other tasks as directed. PREFERRED QUALIFICATIONS: UH-60 qualification and/or experience. Additional experience on one or more of the following aircraft: AH-64 or CH-47. Three to five years leadership experience. Eight or more years' rotary wing experience. Familiarity and ability to use Microsoft Office. Familiarity and ability to use military tech manuals. Familiarity and ability to use Standard Army Management Information Systems. BASIC QUALIFICATIONS: Must be a graduate of one of the following Military Aviation Powertrain and/or General Repair, Hydraulic, Engine, Avionics and Sheet Metal Qualification Courses or civilian equivalent. At least two years of experience on military rotorcraft. Must be able to work 1st, 2nd or 3rd shift schedule as required. Must be able to work flexible work-week schedules i.e. M-F, Tues-Sat, Sun-Th or as required. Must be able to pass a background check. Must be able to obtain a favorable National Agency Check. Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must have own tools. Must be able to deploy to support off station exercises and perform other support duties as assigned. Tool box must be complete, shadowed and marked as a pre-employment requirement. Compensation $39.58/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

JOB TITLE: Aircraft Mechanic II - VC Electrical - Free Housing Support PAY RATE: $35-40/hour MUST BE US PERSONS We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Why Join Us? Contract Length: 12 months (with potential extension) Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: Up to two weeks, if applicable (terms and conditions may vary). Summary: Perform electrical modifications to wiring and system components. Conduct troubleshooting, testing, and quality checks. Work with hazardous energy and Lockout/Tagout systems. Collaborate with other teams (General Mechanics, Structures, Avionics). Ensure compliance with safety protocols and maintain required certifications. Required Skills: 4+ years of on-aircraft electrical installation and modification experience. Experience with routing and terminations, including shielded wires, coaxial cables, and fiber optics. Ability to read and interpret engineering drawings, schematics, and technical orders. Proficiency in connector terminations and wire harness assembly. Desired Skills: A&P License Experience with Modification Programs Work Environment & Physical Requirements: Ability to ascend/descend ladders, work in confined spaces, and lift up to 35 lbs. Exposure to elevated platforms, noise, and hazardous materials. Frequent standing, walking, and overhead reaching. Ability to obtain customer approval (background check required). About Us: The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. We specialize in contract, contract-to-hire, and direct hire placements in engineering, production, IT, maintenance, and support roles. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design Take your aerospace career to new heights-apply today!

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: NoneTRAVEL: Yes, 25% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, but they're also making history. Northrop Grumman is seeking experienced Aircraft Mechanics to support a maintenance program with Northrop Grumman in Lake Charles, LA. The Navy E-6 is an airborne command post and communications relay based on the Boeing 707 platform The aircraft are utilized primarily for long-range patrols along the entire U.S. border, and in source and transit zone countries. This platform, now modified to the E-6B standard, conveys instructions from the National Command Authority to fleet ballistic missile submarines, a mission known as TACAMO ("Take Charge And Move Out"). *These positions are Service Contract Act positions. **These Positions are Contingent upon Funding. **This position will be hired for any shift. Your duties include: Maintains, repairs, and modifies aircraft Systems components of moderate difficulty Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals Troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems Repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, drills, and test equipment Reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction Job duties require that this mechanic: Must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts Have a broad knowledge of aircraft sheet metal/structural modifications and repair Have basic knowledge of electrical theory Have thorough knowledge of aircraft unique tools such as test equipment, and torque wrenches Replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment Removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft Adjusts, repairs, or replaces electrical wiring system and aircraft accessories Performs preflight, thru-flight, and post-flight maintenance inspections Performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes Be able to use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, etc. Be able to read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc. Be able to assemble, modify, and install wire bundles, conductors and other electrical components You will receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. Basic Qualifications: High School Diploma or equivalent (GED) and a minimum 6 years experience Able to perform work in an approved environment during specified work hours Able to change physical locations based upon need (including physical ability to travel) Ability to be subject to a variety of physical conditions Able to wear respirator or other safety gear Ability to be subject to areas which could cause various phobias due to height or closed spaces Preferred Qualifications: A&P License Prior E-6B experience Able to obtain/maintain a Secret DoD clearance Experience performing major aircraft modifications #LCSpring2026 Primary Level Salary Range: $34.90 - $34.90The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

PENDING CONTRACT AWARD Job Title: Aircraft Mechanic I (UH-60) st Bn, 5 th Avn Regt) Aircraft Mechanic I (23021): Aircraft Mechanics I must have a combination of experience to repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti- icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Work involves replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. Supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and specialize in engine repair. May be required to be licensed by Federal Aviation Administration. May require specialization in sheet-metal, electric work, avionics or other aircraft systems related disciplines. Federal Aviation Administration (FAA) licensing of contractor employee technical proficiency is not required. ADDITIONAL QUALIFICATIONS: - All Mechanic Is will possess either a FAA license or equivalent military service school certificate of training in aviation maintenance. - A minimum of one Aircraft Mechanic I on Phase Team shall have additional qualifications as Non-Crewmember observer. - IAW DCMA INST 8210.1C, contractor Non-Crewmember observer, requires an FAA 3rd Class or military class III flight physical annually. Annual renewals of Medical Certificates shall be the responsibility of the Contractor. - A minimum of two Aircraft Mechanic I shall have additional qualifications as Sheet Metal mechanic. - A minimum of one Aircraft Mechanic I shall have additional qualifications as Aircraft Notebook (ACN) Assistant. TASK REQUIREMENTS: Troubleshoot malfunctions in aircraft avionics, structure, landing gear, flight surfaces and controls, anti-icing, pneumatic, hydraulic, engines, auxiliary power unit, and ventilation and heating systems. Repair, replace, and rebuild aircraft structures, such as fuselage and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, rivet gun and drills. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Perform phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Perform preflight, thru flight, and post-flight maintenance inspections, launch and recover aircraft, and Preventive Maintenance Daily Inspections. Use chemical treatment process to etch and alodine parts. Use chemical sealants. Requisition repair parts, materials, and consumable supplies through military supply system. Perform other tasks as directed. PREFERRED QUALIFICATIONS: UH-60 qualification and/or experience. Strong Avionics background on H-60. Strong T-700 Engine background. Experience on two or more of the following aircraft: AH-64, CH-47, or UH-60. Five or more years' rotary wing experience. Familiarity and ability to use military tech manuals. Familiarity and ability to use Standard Army Management Information Systems. BASIC QUALIFICATIONS: Must be a graduate of one of the following Military Aviation Powertrain and/or General Repair, Hydraulic, Engine, Avionics and Sheet Metal Qualification Courses or civilian equivalent. At least two years of experience on military rotorcraft. Must be able to work 1st, 2nd or 3rd shift schedule as required. Must be able to work flexible work-week schedules i.e. M-F, Tues-Sat, Sun-Th or as required. Must be able to pass a background check. Must be able to obtain a favorable National Agency Check. Must be able to climb ladders, raised platforms, and aircraft. Must be able to use hand and power tools. Must have dexterity to handle small parts. Must have own tools. Must be able to deploy to support off station exercises and perform other support duties as assigned. Tool box must be complete, shadowed and marked as a pre-employment requirement. Compensation $37.83/hour Other Compensation Employees will receive a minimum health and welfare fringe benefit of $2.65 for every hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees have a minimum of eleven paid holidays. After completing one year of service, employees will have two weeks paid vacation. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

JOB TITLE: Aircraft Mechanic II - VC Electrical - Free Housing Support PAY RATE: $35-40/hour MUST BE US PERSONS We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Why Join Us? Contract Length: 12 months (with potential extension) Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: Up to two weeks, if applicable (terms and conditions may vary). Summary: Seeking Electrical Mechanics to support the VC-25B Program in San Antonio, TX. Candidates must have 4+ years of on-aircraft electrical installation and modification experience, including routing and terminations of various wiring systems. This role involves electrical modifications, troubleshooting, and testing on aircraft systems, ensuring compliance with engineering and safety standards. Required Skills: 4+ years of on-aircraft electrical installation and modification experience. Experience with routing and terminating shielded wires, coaxial cables, and fiber optic wiring. Ability to read and interpret engineering drawings, technical orders, and schematics. Proficiency in modifying, troubleshooting, and testing electrical and environmental systems. Hands-on experience with wire harness sealing, wrapping, bonding, and tying. Knowledge of shop mathematics, electrical/electronic theories, and systems. Proficient in aircraft-related computer systems and basic office software. Ability to obtain customer approval for access (dual citizenship or prior foreign citizenship may preclude access). Willing to work various shifts, weekends, and overtime as needed. Ability to lift 35 lbs, work in confined spaces, ascend/descend ladders, and operate in high-noise environments. Desired Skills: Experience working on a Modification Program. Ability to operate forklifts, mobile cranes, and electric-powered elevating equipment. High school diploma or equivalent. About Us: The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. We specialize in contract, contract-to-hire, and direct hire placements in engineering, production, IT, maintenance, and support roles. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design Take your aerospace career to new heights-apply today!

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment.