Aircraft mechanic jobs in Robinson, TX

Job Title: Engineering - Aircraft Manual Technician Duration: 12 Months on (possible extension) Shift Timings : 1st (06:00 AM - 03:30 PM) Onsite role Job Summary: This is a Manual Tech Writer • Must have Structures/Maintenance Experience and visible on the resume. • These support system resources include: Level of Repair Analysis(LORA), Reliability Centered Maintenance (RCM), Failure Mode Effect & Critical Analysis (FMECA), Provisioning/SupplySupport, Task/Maintenance Plan Analysis, Interactive Electronic Technical Manuals (IETM), Paper-based manuals, Illustrated Parts Breakdowns (IPB), Support Equipment, PHS&T, and Repair Parts and Special Tool List (RPSTLs), and Industry MIL-STD documents and manuals, which span across multiple aircraft platforms, modifications, and development programs. • This position focuses on the design of inherent supportability into the analysis and the associated design, analysis and optimization of the customers' military support system. • Support and assist in data preparation and presentation for program reviews and perform other work as directed. • Perform to a set of performance metrics and measurements that give visibility to cost and schedule objectives. Qualifications: • Demonstrates a working knowledge and the requisite skill sets to work within the IPT/organization. • Performs all assigned tasks to an acceptable quality standard with minimal supervision. • Compliant to company processes, procedures, and applicable government regulations. • Experience in Military logistics and/or experience in aviation logistics preferred. • Must have strong analytical skills. • Must be experienced with the Microsoft software suite. • Must have excellent communication skills. Education: • High School diploma or equivalent. Bachelor's Degree is preferred.

Job Category: LIFT Maintenance The LIFT Academy A&P Mechanic performs preventive maintenance, repair, modifications and other maintenance of aircraft, components and related equipment in accordance with standards and regulations. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Performs preventive maintenance, repair, modifications and other maintenance of aircraft, components and related equipment and complies with 14 CFR, manufactures specifications, Company policy and procedures as well as other methods accepted by the FAA and OSHA when accomplishing maintenance. * Performs maintenance mechanic duties in all areas inside and outside the hangar. * Troubleshoots all aircraft systems. Executes maintenance work orders. * Uses tools, equipment and test apparatus necessary to assure completion of the work in accordance with accepted industry practices. Verifies that all calibrated tooling is current on its calibration before use. Verifies materials and parts used are of a serviceable condition. * Verifies that each part or component is effective for the aircraft on which it will be installed. * Adheres to material handling and control procedures specified in RSQCM and by the equipment manufacturers. Initiates material requests. * Evaluates the area and equipment that will be utilized to ensure that safety is not compromised before performing any maintenance action. Applies safety first at all times. * Maintains a clean, safe working environment throughout the work shift. * Updates Supervisor on progress of work performed. Reviews paperwork at the end of shift to ensure that all work accomplished is signed for prior to departing the maintenance facility. Assists with completion of shift turnover reports in accordance with procedures in the RSQCM. * Completes all department internal company forms, maintenance records, documents, work orders, etc. including performing maintenance computer system transactions as required * Provides coaching and on-the-job training as directed. * Adheres to established work schedule. Participates in shift meetings and briefings as required. * Submits in writing any suggested changes in operational procedures that will enhance safety and cost effective aircraft maintenance. * Accesses Company Intranet to become familiar with and utilize the RSQCM and aircraft manuals. Ensures part effectivity is correct per aircraft. * Adheres to recurrent training, including required FAA AMT training, and keeps necessary licenses and certification up-to-date. * Reads and acknowledges understanding of maintenance newsletters and Company Emails on a timely basis. * Performs other duties as assigned or required. REQUIRED KNOWLEDGE, SKILLS AND ABILITIES The requirements listed below are representative of the knowledge, skill, and/or ability necessary to perform this job. EDUCATION and/or EXPERIENCE. * High school diploma or equivalent with an FAA Airframe and Powerplant license. * Experience using a computer to look up information and input data. * Able to work both in a team setting and individually. PREFERRED EDUCATION and/or EXPERIENCE * Previous experience as an A&P mechanic or airline experience. * Avionics experience is preferred * Experience with General Aviation piston aircraft * Superior communication skills, both written and verbal * Excellent electrical and mechanical troubleshooting skills REGULATORY * Able to pass an FAA required 10 year work history review and pass criminal background and fingerprint checks. * Willing to submit to and pass FAA and Company mandated random drug and alcohol tests. OTHER REQUIREMENTS * Must possess the required tools. * Must understand and follow aircraft maintenance manuals. * Able to work both in a team setting and individually. * Strong interpersonal skills. * Detail oriented. * Must successfully pass background check and drug test * Possess a stable employment history. * Must have and maintain a valid Driver's License and a clean driving record. LANGUAGE SKILLS Ability to read, write and understand the English language. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively and be understood before groups of associates of the organization. REASONING/PROBLEM SOLVING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several variables in standardized situations. DECISION MAKING Possess decision making skills. Makes limited decisions and determines best methods to solve problems by referring to established precedents and policies. Impact of decisions is moderately low. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Able to stand, walk, use hands to finger, handle and feel, reach with hands and arms at least 90% of the time. * Able to climb or balance, stoop, kneel, crouch and crawl up to 60% of the time. * Able to lift up to 50 pounds at least 35% of the time. * Able to lift or move 75 pounds over 70% of the time. * Must be able to see to perform work and to see approaching vehicles, aircraft and machinery. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Work near moving mechanical parts, work with fumes or airborne particles over 90% of the time. * Work in high, precarious places up to 50% of the time. * Work around toxic or caustic chemicals up to 30% of the time. * Withstand risk of electric shock and work with explosives up to 10% of the time. * Work in outdoor weather conditions inside and outside an open air hangar up to 100% of the time. * The work environment can be very loud. * Able to wear a respirator and protective equipment for testing and regular duties. This includes minimal facial hair in order to ensure proper fit in of respirator in accordance with OSHA regulations. * Able to work nights, evenings, weekends and holidays to support 24 hour operations. TRAVEL REQUIREMENTS Able to travel up to 5% of the time, including overnight stays. EQUAL OPPORTUNITY EMPLOYER, DISABILITY, AND VETERAN ACCOMODATIONS All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Equal Opportunity Employer, Disability and Veteran Accommodations All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Let your career take off with PSA Airlines About PSA PSA Airlines, a wholly owned subsidiary of American Airlines, offers unparalleled opportunities for growth and professional development. We value teamwork, diversity, and inclusivity and strive to create a safe, respectful, and happy work environment for our more than 4,000 employees. Our company culture, known as The PSA Way, is our foundation for operation and fosters stability, growth and a focus on the future while always placing safety at the forefront of everything we do. We are driven in our goals and achievements, eager to be better. We are reliable to one another and accountable for our actions. And we are caring in our daily interactions, with teammates, colleagues, and customers. Join our team to enjoy comprehensive benefits, including travel privileges on the American Airlines global network, so you can explore new destinations and create unforgettable memories with family and friends. Benefits PSA offers the benefits you expect from a company focused on excellence. All eligible team members enjoy a comprehensive benefits package, including: * Travel privileges on the American Airlines global network * A generous vacation plan designed to let you enjoy your travel perks * 401(k) with company match * American Airlines Group (AAG) profit-sharing and bonus opportunities * A choice of three health plan options, all with nationwide coverage with the UnitedHealthcare Choice Plus network * Premium dental coverage * Vision plan options provided, including a plan that covers both glasses and contacts every year * Benefits navigation services, including finding a doctor, scheduling an appointment, understanding your medical bills, and free second opinion services * Access to 24-hour virtual urgent care services * Family planning and fertility treatment * LGBTQ+ friendly services including gender affirming care, assistance finding knowledgeable providers, and family planning * Company-paid Life and AD&D Insurance, Short-term and Long-term Disability, and supplemental life insurance options for spouses and dependent children * Flexible Spending Accounts for both Health Care and Dependent Care services * Comprehensive Employee Assistance Program providing a range of services, including 5 free in-person sessions with a health care professional Responsibilities Position Summary As the Airframe and Powerplant (A&P) Technician, you will impact PSA Airlines' business growth by conducting aviation repairs and services that allow for operations to be on time. By executing maintenance procedures in compliance with Federal Aviation Regulations and company standards, you are ensuring safe and reliable flights. Job Responsibilities * Will perform tasks necessary to comply with Federal Aviation Regulations and accept the responsibility for work performed by themselves and/or in conjunction with others and sign for same on the Company's approved forms. * Keep work areas clean. Return all equipment and tools to assigned areas. A&P Technicians will report all inoperative or faulty equipment to the Maintenance Supervisor or Lead Mechanic in charge. * Work will consist of and include any and all phases of repair and maintenance of aircraft with the aid of the employee's own tools, specialty tools provided by the Company, the use of test equipment, and Company-supplied technical manuals. * In certain cases, and A&P Technician may be authorized to perform required inspection items and assist in Company training programs. * Will at the commencement of each repair or inspection initiate the proper documentation. Parts tags will include a complete description of the discrepancy on all removed parts. Determine if the work to be performed is a Required Inspection Item. * Verifying, through proper documentation, that any part installed on any aircraft or component is approved for that aircraft or component and has been visually inspected and is free of damage or contamination. * Assure that hangar workshops and other areas assigned are maintained in an orderly manner. * Responsible for the Company's Security and Safety Management System (SMS) and associated Safety Risk Management and Safety Assurance outputs. * Perform other duties as assigned by the Maintenance Supervisor through the Lead Mechanic. Position Specifics Qualifications Required * Current FAA Airframe and Powerplant certification. * High school diploma or equivalent. * Valid, state-issued Driver's License. * Capable of using respirators and other personal protective equipment including eye and hearing protection. * Must possess or have ability to obtain a U.S. Passport or equivalent within 90 days of starting position. * Must be able to speak, read, and write in English. * Must be able to demonstrate authorization to work in the US. Preferred * Previous experience with CRJs Additional Information Work Environment: This job operates inside a climate controlled building. This role routinely uses standard office equipment such as computers, telephones, photocopiers, facsimile machines and filing cabinets.Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, the employee is frequently required to stand; walk; climb up and down stairs; lift weight up to 25 lbs; use hands to handle or feel; and reach with hands and arms.Security Clearance: All employees are required to pass the fingerprint-based criminal history records check (CHRC) per 49CFR1542.209. AAP/EEO Statement: PSA Airlines is an equal opportunity employer; qualified applicants are considered for and treated during employment without regard to race, color, creed, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, age, disability, genetic information, protected veteran status or any other characteristic protected by law.Other Duties: Please note this job description is not designated to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

\*\*\*A&P with Inspection Authorization preferred\*\*\* \*\*\*GA experience preferred\*\*\* \*\*\*Tecnam P2010 and Tecnam P2006t experience desired\*\*\* US Aviation Academy is seeking skilled A&P/IA Mechanics to join our team. The ideal candidate will have a strong background in general aviation. General aviation background required. You will be responsible for ensuring the safety and airworthiness of our fleet by performing inspections, repairs, and modifications. Our mechanics maintain a fleet of over 100 fixed-wing aircraft, including Cessna 152, Cessna 172, Piper Seneca & Seminoles, and Tecnam P2010 & P2006t's. A successful candidate will possess the appropriate personality to work in a fast-paced environment while constantly focusing on safety, compliance, and quality. Multiple shifts available - Mon-Thurs days Tues-Fri days Fri-Mon days Mon-Thurs evenings Fri-Mon Evenings Key Responsibilities: * Annual inspections * Inspect aircraft systems thoroughly, including airframe, engines, and electrical systems. * Perform routine maintenance tasks in accordance with FAA regulations and company policies. * Troubleshoot and diagnose mechanical issues, making necessary repairs and adjustments. * Document all maintenance activities, ensuring compliance with regulatory requirements. * Collaborate with other maintenance personnel to resolve complex technical issues. * Maintain a clean and safe working environment, adhering to all safety protocols. * Stay updated on the latest industry practices, technologies, and regulations. Qualifications: * FAA Airframe and Powerplant (A&P) certification. * Inspection Authorization preferred * Premium rates for A&P with Inspection Authorization * GA experience preferred * Tecnam experience preferred * Strong knowledge of aircraft systems and maintenance procedures. * Ability to read and interpret technical manuals, schematics, and blueprints. * Excellent problem-solving skills and attention to detail. * Effective communication skills, both verbal and written. * Ability to work independently and as part of a team. * Eligible to work in the United States. * Must be proficient in English. Benefits: * Competitive salary and overtime opportunities. * Health, dental, and vision insurance. * Retirement plan options. * Paid time off and holidays. Job Type: Full-time Pay: $32.00 - $48.00 per hour Benefits: * 401(k) * Dental insurance * Employee discount * Health insurance * Health savings account * Life insurance * Paid time off * Vision insurance License/Certification: * Airframe & Powerplant License (Required) Ability to Commute: * San Marcos, TX 78666 (Required) Ability to Relocate: * San Marcos, TX 78666: Relocate before starting work (Required) Work Location: In person

This Aircraft Mechanic role maintains repairs and modifies aircraft avionics and subsystem components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Position Skills & Experience required: A minimum of three (3) years' relevant experience in aircraft maintenance within the last six (6) years on assigned airframe. Proficiency in Aircraft Notebook (ACN). Possession of a valid driver's license. Strong organizational, communication, and teamwork skills are essential. Experience conducting both Field and Sustainment level maintenance tasks on CH-47 series aircraft, focusing on avionics, electrical, and instruments. Experience installing, maintaining, modifying, and repairing intricate electronic equipment. Understanding of working in specialized workshops dedicated to Field and Sustainment level maintenance and fixed base operations. Familiarity with performing diagnostic troubleshooting and maintenance repairs directly on the flight line to meet customer needs. In-depth knowledge of aircraft mechanical component troubleshooting and repair. A foundational understanding of electrical theory. Extensive familiarity with specialized aircraft tools, including but not limited to, test equipment, torque wrenches, and dial indicators. Ability to obtain/maintain a secret clearance for access to facilities and COMSEC equipment. Position Responsibilities: Execute proficient troubleshooting, maintenance, and repair of aircraft aligning with aviation regulations, manufacturers' guidelines, and our company policies. Uphold stringent documentation standards, ensuring comprehensive and updated aircraft maintenance records. Adhere diligently to organizational policies and procedures, maintaining a compliant and efficient workspace. Demonstrate leadership by guiding teams through complex, aircraft-related tasks as and when necessary. Effectively prioritize workload, ensuring organized and timely completion of assigned projects Will be responsible for maintaining aircraft records in customer-provided aircraft management systems (ACN/SAP). May be to travel May be to work night/evening shifts. May be required to work overtime and weekends. Physical Demand: Candidates may be subjected to pre-employment physicals pertinent to the role, such as operating Ground Support Equipment and wearing personal respirators. Candidates may be subjected to pre-employment drug screening. Education Requirements: High School graduate or equivalent is required. Vali, Inc. is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

ESSENTIAL FUNCTIONS: The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. Inspecting and repairing ground support equipment Installing and removing Quick Engine Change (QEC) kits on aircraft engines Dealing with Coworkers/Clients/public JOB DUTIES: Responsibilities may include, but are not limited to: Performing engine QEC buildup actions, both assembly and tear down. Uses automated maintenance data systems to maintain equipment records, and document maintenance actions, maintains external fuel and grounding systems Inspects, tests, and operates GSE to determine equipment serviceability and proper operation Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air, disassembles and assembles malfunctioning GSE accessories and components Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories Stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses Disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations Operates, cleans, inspects, and services GSE towing vehicles; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations. Practices good housekeeping, tool control, Foreign Object Damage prevention and safety at all times. Additional responsibilities include working with a variety of repair and test equipment including welders, torches, pressure testers and electrical testers to name a few. Completing all required documentation and tagging requirements of QEC items. Order QEC parts from COMBS. Refer to technical publications to determine specifications to be met. Track and record calibration dates to insure that support equipment is up to date. Keep files with documentation and certifications of calibrated equipment. Ensure that equipment is sent out for calibration when due. Ensure that all equipment is accounted for. Assign I.D. numbers to each piece of equipment. When turning over equipment to the operating command make certain to have them sign a receipt for all equipment to keep on file in COMBS. Each LD. number must have a file of record. Performs maintenance and inspections on (GSE) according to applicable maintenance manuals, manufacturer specifications and FAA regulations. Research and order materials for repair of support equipment. Performs engine QEC build-up actions, i.e. assembly and teardown. Cleaning of warehouse, shops, offices and restrooms as required. Clerical and other assigned duties as required. Prepares GSE for storage and transportation Other Duties as assigned Abide by all Company policies and procedures not otherwise noted above. QUALIFICATIONS: Knowledge, Skills, and Abilities (Required Skills include the ability to:) Understanding of scheduling techniques and technical order requirements. Ability to accurately troubleshoot and repair complex aircraft engine/support equipment systems. Mental and visual ability to read and understand detailed technical publications and instructions. Ability to communicate effectively, both orally and in writing. Ability to deal courteously with the customer. Knowledge of generally accepted accounting principles sufficient to perform the job, duties, and tasks associated with the position. Knowledge of contractual requirements. Extensive working knowledge in logistics and data information systems. Education and Experience: Graduation from a standard four (4) year high school or equivalent (GED). Thirty-six (36) months in one or more of the maintenance trades or the Minimum three (3) years recent aircraft maintenance experience Valid FAA Airframe and Power plant Certificate Benefits include the following: Healthcare coverage Retirement Plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans.

RAVN Group ("RAVN") is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Job Description: Company Summary RAVN is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Department Summary The RAVN Aerospace Maintenance Department is a mission-focused, highly skilled team dedicated to ensuring the safety, readiness, and performance of our tactical aircraft fleet. With over 50 years of combined experience supporting military adversary air programs, our team brings deep expertise in tactical aviation maintenance. Staffed by certified A&P aircraft mechanics, technicians, quality assurance professionals, and logisticians, we deliver precise, efficient, and compliant maintenance operations. Our commitment to operational excellence is central to RAVN's mission, enabling safe, seamless, and reliable flight operations in demanding environments. Position Summary The ideal candidate for the Aircraft Mechanic position is a technically astute, disciplined, and team-oriented professional. Reporting to the Site Lead, this individual will perform organizational, intermediate, and limited depot-level maintenance on assigned aircraft, components, and equipment-including inspection, operational testing, repair, modification, and troubleshooting. The role requires advanced technical expertise to resolve complex issues and provide guidance and instruction to fellow team members. Responsible for the maintenance, inspection, troubleshooting of Airframe and Powerplant systems on the BAe Hawk aircraft, reporting to the Maintenance Lead in the accomplishment of the following functions supporting Adversary Air Support flights. Candidates must demonstrate professionalism, productivity, and responsiveness to the needs of the company, colleagues, and customers. Flexibility is essential, as cross-training and additional duties may be assigned at leadership's discretion to meet evolving mission demands. Requirements Repair, replace and rebuild aircraft structures, system, and functional components. Assemble and install electrical, avionic, mechanical, hydraulic, structural components and accessories using hand tools and power tools. Develop, implement, and manage comprehensive maintenance schedules to maintain optimal performance and compliance with aviation safety regulations and industry standards. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems. Conduct regular quality assurance audits and inspections to verify compliance with military and FAA standards, identifying and correcting discrepancies. Service, repair, troubleshoot and modify aircraft and aircraft engines. Perform storage and shipment requirements on engines and support equipment to include documentation. Repair, rework and replace components or parts of CFSE to ensure proper operation. Refer to workbooks and technical publications to determine specifications to be met. Perform routine support equipment inspections and maintains and performs necessary corrective actions to include unscheduled maintenance. Maintain accurate and detailed records of all inspections, repairs, modifications, and component tracking in accordance with regulatory and internal documentation procedures. Collaborate with aircraft maintenance teams to coordinate repairs, upgrades, and replacements, minimizing downtime and maximizing fleet availability. Monitor industry trends, regulatory changes, and emerging technologies in aviation life support and egress systems; integrate best practices into operational procedures. Assist in the development and continuous improvement of standard operating procedures (SOPs), policies, and compliance protocols. Comply with all company, OSHA and customer safety regulations. Coordinate with procurement and supply chain teams to ensure timely sourcing and availability of parts, equipment, and consumables necessary for mission support. Load and download aircraft weapons systems. Have or have the ability to obtain a secret clearance. Desired Experience/Skills A&P Prior military Proven track record in performing precise equipment inspections, diagnosing faults, executing repairs, and ensuring maintenance compliance. Strong organizational skills with exceptional attention to detail and the ability to manage multiple priorities in a fast-paced, mission-driven environment. Effective leadership and communication skills with experience supervising or mentoring diverse technical teams. Proficient in Microsoft Office applications and maintenance tracking software; comfortable navigating digital tools for documentation and scheduling. Self-motivated and proactive with a problem-solving mindset and the ability to make informed decisions under pressure. Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). Physical Demands Occasional lifting of up to 50 pounds. Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls, reaching with hands. Regularly ascend/descend stairs. Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. May be exposed to or required to handle hazardous material. Specific work hours determined by operational, departmental, or contractual requirements. Occasional evening, weekend, holiday work may be required. Travel to various work sites may be required. Other duties as assigned. Work Authorization Must be lawfully eligible to work in the United States and complete an I-9 Form. Must have a clean driving record. RAVN Aerospace is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. Pre-employment and ongoing physical certifications. RAVN Aerospace is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question.

JOB TITLE: (P) Aircraft Mechanic II - General VC Maintenance - Free Housing Support PAY RATE: $35-40/hour We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Why Join Us? Contract Length: 12 months (with potential extension) Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: up to two weeks if applicable Summary: Sealing, painting, shimming, preserving aircraft structure. Reading and interpreting engineering drawings. Using tooling for structural parts modification and repair. Performing flight controls installation, removal, and rigging. Adhering to safety and operating procedures. Requirements: High school diploma or GED 4+ years of on-aircraft general maintenance experience. Experience with Depot Level/Heavy General maintenance. Proficiency in aircraft systems: hydraulic, flight control, monuments, landing gears, fuel systems, engines. Ability to interpret engineering drawings and perform modifications. Eligibility for aircraft access approval (may exclude dual citizens). Knowledge of shop mathematics and practices. Proficiency in schematics, assembly drawings, and computer skills. Flexibility to work varied shifts, including weekends and holidays. Must be a U.S. Person (as defined by ITAR). Desired Skills: FAA A&P License or Military Technical School equivalent. Experience with aircraft engine runs and borescope inspections. Certification to operate equipment like forklifts and mobile cranes. About Us: The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. We specialize in contract, contract-to-hire, and direct hire placements in engineering, production, IT, maintenance, and support roles. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design Take your aerospace career to new heights-apply today!

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment. We can recommend jobs specifically for you! Click here to get started.

The Aircraft Maintenance position plays a crucial role in ensuring the operational safety and efficiency of aircraft. This position involves extensive hands-on work in inspecting, maintaining, and repairing aircraft to ensure compliance with safety regulations and performance standards. Essential Functions: Performs maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft components in accordance with technical specifications, engineering instructions, and FAA regulations. Conduct thorough inspections to identify any wear, tear, or damage, and carry out necessary repairs. Use diagnostic tools and equipment to troubleshoot and resolve aircraft system issues. Adhere to maintenance manuals, technical specifications, and regulatory requirements during all maintenance activities. Document all maintenance activities accurately in maintenance logs and records. Collaborate with engineering teams and provide feedback on aircraft performance and any issues encountered. Ensure that all tools, materials, and equipment are calibrated correctly and maintained in good working condition. Participate in continuous improvement activities to enhance maintenance processes and practices. Performs flightline operations, aircraft inspections, or repairs, sometimes in confined spaces and inclement weather. Strong understanding of safety protocols and regulatory compliance requirements. Ability to interpret technical manuals, schematics, and engineering documentation. Ability to obtain certification to operate self-propelled vehicles such as forklifts, scissor lifts, boom lifts, aircraft support equipment, and towing vehicles. Willingness and ability to work flexible hours, including nights, weekends, and on-call shifts. Ability to climb, including ladders, stairs, and portable stands and navigate these with or without reasonable accommodation. Ability to lift and/or move objects, up to 30 pounds, with or without reasonable accommodation. Proficiency with aircraft maintenance software and diagnostic tools. Ability to obtain and maintain a security clearance required. Qualifications: Requires a High School Diploma or equivalent and a minimum of 8 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 4 years of prior related experience. Minimum 4 years experience in aircraft maintenance on G550 aircraft, preferably with a focus on complex mechanical and avionics systems. Ability to pass a flightline physical. Preferred Additional Skills: FAA Airframe and Powerplant (A&P) certification preferred. Experience with a variety aircraft models that the company operates, such as C-130, P-8A, G550, etc. Advanced troubleshooting skills with a focus on avionics and electrical systems. Strong organizational skills and attention to detail. Ability to work effectively as part of a team and independently. Excellent communication skills to liaise with engineers, customers, and other maintenance staff. #LI-AS1

The **Aircraft Mechanic I** **(** **Pneudraulics)** maintains, modifies, and repairs hydraulic and pneumatic systems and components that actuate mechanisms or produce, control, and regulate the flow of fluids (liquids and gases), tests for and isolates malfunctions in hydraulic and pneumatic systems or components, utilizing technical manuals and schematics, and modifies, repairs or disassembles and overhauls systems or components. Key tasks (sample) + Adjusts: + Flight Controls (UH-60) + Integrated Lower Control Actuator (ILCA) (CH-47) + Fabricates: + Metal Tubing + Teflon Hose Assemblies + Maintains: + Hydraulic Pump (CH-47) + The Aviation Ground Power Unit (AGPU) + The Generic Aviation Nitrogen Generator (GANG) + The Hose Tester + Operates: + The Aviation Ground Power Unit (APGU) + The Portable Hydraulic Purification System + Performs: + Bleeding Procedures on Flight Control Hydraulics Systems (CH-47) + Bleeding Procedures on Utility Hydraulics System (CH-47) + Purification of Hydraulic System (CH-47) + Service on Nitrogen Bottles using the Generic Aviation Nitrogen Generator (GANG) + Repairs: + Auxiliary Power Unit (APU) Start Module Accumulator (CH-47) + Bleed Air Shutoff Valve (UH-60) + Hydraulic Reservoir Cooler (CH-47) + Hydraulic System Fill Module (CH-47) + Integrated Lower Control Actuator (ILCA) (CH-47) + Landing Gear Brakes (CH-47) + Main Landing Gear Shock Struts (UH-60) + Main Landing Gear Wheel Brake (UH-60) + Main Rotor Damper (UH-60) + Parking Brake Valve Assembly + Tail Landing Gear Shock Strut (UH-60) + Tubing using Perma-swage Method + Replaces: + (CH-47) Rosan Adapters + Pitch Trim Assembly Stability Augmentation System (SAS) Servo Valve (UH-60) + Stability Augmentation System (SAS) Actuator (UH-60) + Troubleshoots Pilot Assist Module (UH-60) + Applies corrosion preventative procedures. + Uses and performs operator maintenance on ground support equipment, common and special tools. + Performs limited maintenance operational checks. + Performs scheduled inspections and assists in performing special inspections. + Requisitions bench stock for repair of powertrain systems and subcomponents. + Prepares request for turn ins and repair parts and powertrain components. + Prepares forms and records related to aircraft maintenance. + Removes and disassembles defective parts of the aircraft. + Maintains the supplies and perform preventive maintenance. + Performs additional duties, including maintenance duties, as requested. + Adheres to company policies and safety programs (Safety-first mentality). **Minimum Requirements** + High School Diploma or equivalent is required. + U.S. military technical school or specialized training course is desired, certification of education level is required. + Valid up-to-date A&P license _(optional_ ) + Shall have three years aviation maintenance experience, two years rotary wing aircraft experience, and two years on the assigned Mission Design Series (MDS). All experience must be within the six most recent years. + Valid Driver's License. + Must provide own tools/toolbox. Recruiters will provide toolbox requirements to candidates upon selection. **Clearance Requirements** + Must be able to obtain and maintain a NACI(T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization to work at this facility. **Knowledge & Skills** + Thorough knowledge of aircraft powertrain systems and subsystems and repair. + Basic knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, hydraulic press machine, and those listed in the assigned MDS Maintenance Allocation Chart (MAC). + Working knowledge of technical publications and Logistics Information Systems. + Able to prioritize workloads to maintain schedules on assigned projects + Possess the level of experience to inspect all required aeronautical type maintenance to be performed by an aircraft powertrain mechanic. + The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. **Physical Requirements/Working Environment** + Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. + Must be able to climb stairs, ramps, ladders, and work stands. + Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. + May be required to lift/push/pull heavy objects whose weight may exceed 50 pounds. + Must be able to type using a standard keyboard to communicate through e-mail and various software applications. + Will handle dirty parts and lubricants. + Will be required to wear proper Personal Protective Equipment (PPE). + Must be able to pass a Respirator Physical and Fit Test qualification. + May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. + May work in maintenance shop or outside. + Must be able to work in a shop where the environment is drafty, noisy, and dirty. + May be exposed to extreme noise from operating equipment. + May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. + May be expected to work in austere environments and all-weather conditions. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Essential Functions: Services aircraft, directs incoming and outgoing aircraft near terminal or flight line parking area, and assists pilot's maneuvering of the aircraft on ground, using hand or light signals Drives light truck with guiding sign and secures aircraft in parking position with blocks, stakes, and tie downs Operates service vehicles to replenish fuel, oil, water, and waste system chemicals Services oxygen and hydraulic fluid; removes waste Documents aircraft maintenance records with description of the services performed Checks for fuel contamination by draining sumps and fuel drains Operates ground support equipment such as electrical power supply and engine starting units Examines tires for specified air pressure and condition; removes and replaces defective tires Assists in jacking and towing aircraft Positions and removes boarding platforms to unload or load aircraft passengers Unloads and loads luggage and cargo, using tow truck with luggage carts Cleans exterior or interior of aircraft, using portable platform ladders, brushes, rags, water hose, and vacuum De-ices aircraft wings and assemblies Loads and unloads containers of food, beverages, and dishes for in-flight meal services Traces lost luggage for customers and prepare lost baggage claims Installs or retrieves drag chutes; sends used chutes to the parachute shop for repacking Adheres to the Quality Control Program in accordance with the contract Adheres to the safety program IAW contract requirements; and federal, state, and local regulations Adheres to standard work practices, safety, quality, equipment, vehicles, supplies, performance work statement, and company policies and procedures Executes reports, inspections, and logs as required by the organization and contract requirements Operate vehicle, property, equipment and supply programs; Complies with the Drug-Free Workplace policy Adheres to Operations Security standard operating procedures Complies with the Property Control Plan for management of Government Furnished Property Adheres to the safety and health program that complies with EM 385-1-1 and applicable OSHA, DoD, Armed Forces, federal, state, and local safety, environmental, and health requirements Adheres to a site-specific Accident Prevention Plan in accordance with Appendix A, EM 385-1-1 Other tasks as directed by the Project Manager/Supervisor Must be able to obtain and maintain US Secret Security Clearance Valid Texas Driver's license required, class "B" with air brake endorsement Benefits include: Medical, Vision, Dental, Health & Welfare, Paid Time Off, and Paid Holidays. TRDI hires many individuals with and without disabilities, especially those that are transitioning out of the Armed Services: If you are self-identifying a disability, please submit supportive documentation (i.e. the official medical/psychological diagnosis signed by the appropriate healthcare provider, along with functional limitations + extent) with the application package for full employment consideration. If you have a Vocational Rehabilitation Counselor assigned, you can request the Vocational Rehabilitation Counselor (VRC) for a 1-page letter on their official letterhead with the same requested information (signed by the VRC). Please fax to ************.

Improving America's infrastructure isn't for the weak. It takes grit, determination, and hard work to execute high impact projects. Michels Corporation engages 8,000 people and 18,000 pieces of heavy equipment in our insatiable drive to be the best. Our work improves lives. Find out how a career as a Floor Lead can change yours. A Lead will coordinate the work of team members engaged in setting up, installing, repairing, and maintaining machinery and equipment, and in fabricating metal parts and tools. In addition, this position will serve as a full-time working shop mechanic. Critical for success is the ability to demonstrate strong communication skills, both verbal and written. Why Michels? * We are consistently ranked among the top 10% of Engineering News-Record's Top 400 Contractors * Our steady, strategic growth revolves around a commitment to quality * We are family owned and operated * We invest an average of $5,000 per employee on training each year * We reward hard work and dedication with limitless opportunities * We believe it is everyone's responsibility to promote safety, regardless of job titles. * We offer a comprehensive benefits program, including Health, Dental, Life, Flexible Spending Accounts, Health Savings Account, Short Term and Long-Term Disability Insurance, 401(k) plan, Legal Plan, and Identity Theft and Monitoring Plan. Depending on your positions and location you may participate in a different benefit plan. Why you? * You thrive in fast-paced environments under tight deadlines * You relish new challenges and evolving technology * You enjoy collaborating and communicating with your teammates * You like to know your efforts are noticed and appreciated * You have strong communication skills * You deliver exemplary customer services in all interactions What it takes: * 5+ years of experience working on pickup trucks (Ford preferred), heavy trucks, construction or utility related equipment, and trailers * Must possess a valid driver license for the type(s) of vehicles which may be driven and an acceptable driving record as determined by the Michels Review Team * CDL Class A and valid Federal Medical Card * Experience with DOT Inspections * Experience welding * Basic computer proficiency * Able to provide own basic hand tools * Diesel Mechanic Program completion and/or Master ASE Credits (desired) * Forklift experience - training will be provided (desired) AA/EOE/M/W/Vet/Disability ***************************************************

Job Description Essential Functions: Services aircraft, directs incoming and outgoing aircraft near terminal or flight line parking area, and assists pilot's maneuvering of the aircraft on ground, using hand or light signals Drives light truck with guiding sign and secures aircraft in parking position with blocks, stakes, and tie downs Operates service vehicles to replenish fuel, oil, water, and waste system chemicals Services oxygen and hydraulic fluid; removes waste Documents aircraft maintenance records with description of the services performed Checks for fuel contamination by draining sumps and fuel drains Operates ground support equipment such as electrical power supply and engine starting units Examines tires for specified air pressure and condition; removes and replaces defective tires Assists in jacking and towing aircraft Positions and removes boarding platforms to unload or load aircraft passengers Unloads and loads luggage and cargo, using tow truck with luggage carts Cleans exterior or interior of aircraft, using portable platform ladders, brushes, rags, water hose, and vacuum De-ices aircraft wings and assemblies Loads and unloads containers of food, beverages, and dishes for in-flight meal services Traces lost luggage for customers and prepare lost baggage claims Installs or retrieves drag chutes; sends used chutes to the parachute shop for repacking Adheres to the Quality Control Program in accordance with the contract Adheres to the safety program IAW contract requirements; and federal, state, and local regulations Adheres to standard work practices, safety, quality, equipment, vehicles, supplies, performance work statement, and company policies and procedures Executes reports, inspections, and logs as required by the organization and contract requirements Operate vehicle, property, equipment and supply programs; Complies with the Drug-Free Workplace policy Adheres to Operations Security standard operating procedures Complies with the Property Control Plan for management of Government Furnished Property Adheres to the safety and health program that complies with EM 385-1-1 and applicable OSHA, DoD, Armed Forces, federal, state, and local safety, environmental, and health requirements Adheres to a site-specific Accident Prevention Plan in accordance with Appendix A, EM 385-1-1 Other tasks as directed by the Project Manager/Supervisor Must be able to obtain and maintain US Secret Security Clearance Valid Texas Driver's license required, class "B" with air brake endorsement Benefits include: Medical, Vision, Dental, Health & Welfare, Paid Time Off, and Paid Holidays. TRDI hires many individuals with and without disabilities, especially those that are transitioning out of the Armed Services: If you are self-identifying a disability, please submit supportive documentation (i.e. the official medical/psychological diagnosis signed by the appropriate healthcare provider, along with functional limitations + extent) with the application package for full employment consideration. If you have a Vocational Rehabilitation Counselor assigned, you can request the Vocational Rehabilitation Counselor (VRC) for a 1-page letter on their official letterhead with the same requested information (signed by the VRC). Please fax to ************.

Geoquest USA, Inc. (formerly The Reinforced Earth Company) is recognized as the inventor and market leader of the MSE (Mechanically Stabilized Earth) retaining wall industry. The company provides the design and supply of materials of proprietary retaining wall systems and earth related technologies to contractors and owners for use in civil engineering. Our company works as a sub-contractor/material supplier on DOT and privately owned projects. We perform all duties associated with our jobs from sales, marketing, civil engineering/design, supply, and construction support. Job Description Summary: Geoquest USA is currently seeking a Mechanic for its Waco Precast Facility. The Mechanic will perform assigned tasks, including but not limited to problem assessment, parts replacement, oil changes, and tire rotations. They will log issues encountered and all work performed to invoice correctly. Following successful work completion, the auto mechanic may explain vehicle fixes and suggest future improvements. Responsibilities include but are not limited to: Maintains vehicles, which may include the company's fleet of cars, trucks, heavy equipment, tractor/trailers, and other motor vehicles. Performs routine and preventive maintenance including oil changes and tune-ups. Performs tests on specific parts and systems to ensure proper function. Identifies mechanical problems either visually or with computer diagnostic equipment. Examines critical parts and systems using a standard checklist. Repairs or replaces malfunctioning parts and systems such as brake pads, belts, water pumps, transmissions, and other mechanical parts. Plans and establishes timetable to complete repairs and maintenance. Visits job sites to inspect vehicles. Test drives vehicle to confirm safe and proper operation. Performs other related duties as assigned. Requirements/Education/Skill: High school diploma or equivalent required. Vocational/technical school program or apprenticeship in auto repair or related field preferred. Two years of related experience preferred. Commercial driver's license may be required. Extensive knowledge of all aspects of vehicle repair. Excellent mechanical repair skills. Excellent analytical and problem-solving skills. Ability to read service and repair manuals. Proficient with computer diagnostic equipment and software. Physical Requirements: Must be able to bend, stretch, kneel, and squat to perform repairs and inspections. Must be able to lift 50 pounds at times. Must be able to work safely in a noisy area with many odors present. Must be able to work outside in the elements. Geoquest USA, Inc. leads the country in providing top notch precast MSE wall panels. Geoquest USA provides an opportunity for growth, development and promotions from within. Geoquest USA offers commensurate salaries and a strong Benefit Package including: 6 days paid Vacation to start 11 paid Holidays 401(k) with Company Contribution Medical, Dental (with Orthodontia for children up to age 26), and Vision Insurance Flexible Spending Wellness Program with Incentives Free Parking For more information about our Company, please visit us online at ******************************* Geoquest USA is an Equal Opportunity Employer.

Repair, operate, rehab, and provide general maintenance to park rides and equipment. SPECIFIC DUTIES AND RESPONSIBILITIES: Perform daily mechanical inspections and repairs to ride structures and units Maintain and trouble shoot amusement rides and park equipment Maintain records for maintenance and inspections performed Work with other departments as needed to complete duties Maintain compliance with all safety rules, procedures, and regulations Maintain positive interaction with other employees and guests Other tasks and duties as assigned SKILLS AND QUALIFICATIONS: One to Two years of maintenance experience involving industrial or heavy equipment maintenance and mechanical repair procedures Should have a varied skill set including knowledge of general maintenance, welding, and machine shop repair Must be able to work varied shifts, days, nights, and weekends including extended hours when required and willing to work under various weather conditions Must be physically able to climb stairs and ride units with heights of 50 or more feet Must be able to lift up to 50 pounds and stand for extended periods of time Must be able to stoop, bend, and lift regularly Must be self-motivated and able to perform tasks with minimal supervision Must be at least 18 years of age and possess a high school diploma or equivalent Able to provide own basic hand tools Must possess a valid driver's license, a good driving record, and successfully complete all authorized employment screenings and criminal background checks

RAVN Group ("RAVN") is pushing the boundaries of innovation in the aviation industry, focusing on cutting-edge technology and advanced aerospace solutions. As part of the RAVN team, you'll be at the forefront of revolutionizing pilot training on military grade aircrafts and aerospace engineering in the defense sector. RAVN provides combat or high maneuver training for pilots, RDT&E, and maintenance services with its fully owned fleet of aircraft. Job Description: Department Summary The RAVN Aerospace Maintenance Department is a mission-focused, highly skilled team dedicated to ensuring the safety, readiness, and performance of our tactical aircraft fleet. With over 50 years of combined experience supporting military adversary air programs, our team brings deep expertise in tactical aviation maintenance. Staffed by certified A&P aircraft mechanics, technicians, quality assurance professionals, and logisticians, we deliver precise, efficient, and compliant maintenance operations. Our commitment to operational excellence is central to RAVN's mission, enabling safe, seamless, and reliable flight operations in demanding environments. Position Summary The ideal candidate for the Aircraft Mechanic position is a technically astute, disciplined, and team-oriented professional. Reporting to the Site Lead, this individual will perform organizational, intermediate, and limited depot-level maintenance on assigned aircraft, components, and equipment-including inspection, operational testing, repair, modification, and troubleshooting. The role requires advanced technical expertise to resolve complex issues and provide guidance and instruction to fellow team members. Responsible for the maintenance, inspection, troubleshooting of Airframe and Powerplant systems on the A-27 Tucano and BAe Hawk aircraft, reporting to the Maintenance Lead in the accomplishment of the following functions supporting Close Air Support flights. Candidates must demonstrate professionalism, productivity, and responsiveness to the needs of the company, colleagues, and customers. Flexibility is essential, as cross-training and additional duties may be assigned at leadership's discretion to meet evolving mission demands. Requirements Repair, replace and rebuild aircraft structures, system, and functional components. Assemble and install electrical, avionic, mechanical, hydraulic, structural components and accessories using hand tools and power tools. Develop, implement, and manage comprehensive maintenance schedules to maintain optimal performance and compliance with aviation safety regulations and industry standards. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems. Conduct regular quality assurance audits and inspections to verify compliance with military and FAA standards, identifying and correcting discrepancies. Service, repair, troubleshoot and modify aircraft and aircraft engines. Perform storage and shipment requirements on engines and support equipment to include documentation. Repair, rework and replace components or parts of CFSE to ensure proper operation. Refer to workbooks and technical publications to determine specifications to be met. Perform routine support equipment inspections and maintains and performs necessary corrective actions to include unscheduled maintenance. Maintain accurate and detailed records of all inspections, repairs, modifications, and component tracking in accordance with regulatory and internal documentation procedures. Collaborate with aircraft maintenance teams to coordinate repairs, upgrades, and replacements, minimizing downtime and maximizing fleet availability. Monitor industry trends, regulatory changes, and emerging technologies in aviation life support and egress systems; integrate best practices into operational procedures. Assist in the development and continuous improvement of standard operating procedures (SOPs), policies, and compliance protocols. Comply with all company, OSHA and customer safety regulations. Coordinate with procurement and supply chain teams to ensure timely sourcing and availability of parts, equipment, and consumables necessary for mission support. Load and download aircraft weapons systems. Have or have the ability to obtain a secret clearance. Desired Experience/Skills A&P Prior military Proven track record in performing precise equipment inspections, diagnosing faults, executing repairs, and ensuring maintenance compliance. Strong organizational skills with exceptional attention to detail and the ability to manage multiple priorities in a fast-paced, mission-driven environment. Effective leadership and communication skills with experience supervising or mentoring diverse technical teams. Proficient in Microsoft Office applications and maintenance tracking software; comfortable navigating digital tools for documentation and scheduling. Self-motivated and proactive with a problem-solving mindset and the ability to make informed decisions under pressure. Support Equipment Operator License (Tow Tractor, N2 Servicing Trailer, and Mobile Start Unit at a minimum). Physical Demands Occasional lifting of up to 50 pounds. Regular use of hands and fingers to handle, feel, or operate objects, tools, or controls, reaching with hands. Regularly ascend/descend stairs. Occasional aircraft hangar or warehouse environment with exposure to loud noises, fumes from engines and chemicals, unpredictable climate (hot/cold), and electrical shock, or trip or slip hazards. May be exposed to or required to handle hazardous material. Specific work hours determined by operational, departmental, or contractual requirements. Occasional evening, weekend, holiday work may be required. Travel to various work sites may be required. Other duties as assigned. Work Authorization Must be lawfully eligible to work in the United States and complete an I-9 Form. Must have a clean driving record. RAVN Aerospace is a Drug & Alcohol-Free Workplace. Pre-employment, random, or for cause drug/alcohol testing (including for marijuana) required. Pre-employment and ongoing physical certifications. RAVN Aerospace is an EEO/AA/Disabled/Veterans Employer I understand that if an offer of employment is made, I may be required to undergo investigation into all statements and references contained in this application. Said investigation may include credit, driving, criminal background, professional references, and other background checks. By applying for this position, I authorize post-offer investigation into my background as necessary and as a condition of employment. Note: a criminal conviction does not constitute an automatic bar to employment and will be considered only as it substantially relates to the position in question.

JOB TITLE: Aircraft Mechanic II - VC Electrical - Free Housing Support PAY RATE: $35-40/hour MUST BE US PERSONS We are a national staffing firm partnering with top-tier aerospace companies, and we are seeking first-class employees to join our clients' teams! Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Why Join Us? Contract Length: 12 months (with potential extension) Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority as a Tier 1 supplier Opportunities: Thousands of openings nationwide Housing Assistance: Up to two weeks, if applicable (terms and conditions may vary). Summary: Perform electrical modifications to wiring and system components. Conduct troubleshooting, testing, and quality checks. Work with hazardous energy and Lockout/Tagout systems. Collaborate with other teams (General Mechanics, Structures, Avionics). Ensure compliance with safety protocols and maintain required certifications. Required Skills: 4+ years of on-aircraft electrical installation and modification experience. Experience with routing and terminations, including shielded wires, coaxial cables, and fiber optics. Ability to read and interpret engineering drawings, schematics, and technical orders. Proficiency in connector terminations and wire harness assembly. Desired Skills: A&P License Experience with Modification Programs Work Environment & Physical Requirements: Ability to ascend/descend ladders, work in confined spaces, and lift up to 35 lbs. Exposure to elevated platforms, noise, and hazardous materials. Frequent standing, walking, and overhead reaching. Ability to obtain customer approval (background check required). About Us: The Structures Company is a leading aerospace staffing agency, providing top-tier talent to major OEMs and Tier 1 suppliers. We specialize in contract, contract-to-hire, and direct hire placements in engineering, production, IT, maintenance, and support roles. Eligibility Requirements: U.S. Citizenship required under ITAR regulations: A U.S. person is defined as a lawful permanent resident or a protected individual under 8 U.S.C. 1324b(a)(3). Keywords: Aerospace, Aviation, Engineering, Maintenance, Aircraft Design Take your aerospace career to new heights-apply today!

Who we are: Would you like to work for a stable, secure, and fast-growing airline where you will be stimulated, challenged, and have the opportunity to develop your career? If so, read on! Come and work with the best of the best at Envoy Air where you will join a team committed to providing outstanding service. We offer: Amazing employee flight privileges within the American Airlines global network Training and development programs to take your career to the next level Comprehensive health and life benefits (subject to location) Responsibilities Responsibilities Ensure our fleet meets aircraft standards as required by the Federal Aviation Administration (FAA) Maintain the airworthiness of aircraft and all their components while in service or while undergoing scheduled overhaul maintenance Completed tasks according to FAA regulations, company policies and procedures, and instructions from Crew Chiefs, Supervisors and Managers Certify the quality of personal workmanship, including signing mechanical flight releases for field work Complete necessary paperwork and computer entries for any maintenance performed A wide variety of duties are performed such as dismantling, overhauling, repairing, fabricating, assembling, welding and erecting all parts of an aircraft; which includes airframe, engines, radio equipment, instruments, electrical systems, heating systems, cooling systems, and hydraulic systems Test and inspect parts, subassemblies or completed assemblies Assure the shop/work area is maintained in a safe and orderly manner. If qualified, may be responsible for taxiing and towing aircraft for maintenance purposes Qualifications Position Requirements Minimum Age: 18 High school diploma or GED equivalent Valid Airframe & Powerplant (A&P) license Valid state driver's license; some license restrictions may prohibit a candidate from being considered for this position Ability to differentiate colors such as: red, green, yellow, blue, black, brown, white and orange Ability to lift items weighing up to 60 lbs. Willing and able to work rotating shifts including, nights, holidays, weekends and days off Demonstrated ability to communicate effectively both orally and in writing Possess the legal right to work in the United States Must be able to read, write, fluently speak and understand the English language Position Preferences A minimum of one (1) year of aircraft maintenance experience FCC General Radio Telephone Operators license Additional Details Mechanics must maintain a valid passport and the ability to travel freely to and from all of the cities/countries served by our Airline in order to complete field trips This position is covered by a collective bargaining agreement (unless in Abilene, TX) Must fulfill FAA criminal background checks to qualify for unescorted access privileges to airport security identification display areas (SIDA), if applicable Must be able to secure appropriate airport authority and/or US Customs security badges, if applicable If applicable, Federal law requires Envoy to determine an applicant's history of Department of Transportation (DOT) drug and/or alcohol violation(s) or refusal(s) to test before hiring him/her into a safety-sensitive position Envoy Air Inc., a wholly owned subsidiary of American Airlines Group, provides regional flight service to American Airlines under the American Eagle brand and ground handling services for many American Airlines Group flights. The company was founded in 1998 as American Eagle Airlines, Inc., following the merger of several smaller regional carriers to create one of the largest regional airlines in the world. Envoy is headquartered in Irving, Texas, with hubs in Dallas/Fort Worth, Chicago and Miami, with a large ground handling operation in Los Angeles. Connect with Envoy on Twitter @EnvoyAirCareers, on Instagram @EnvoyAirCareers, and on Facebook at Facebook.com/envoyaircareers and Facebook.com/EnvoyPilotRecruitment.