Assembler jobs in Enterprise, NV

PURPOSE This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful. COMPETENCIES Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

Job DescriptionMy Next Career Path Staffing - With over 20 years' experience in Technology Staffing, MNCP Staffing matches candidates to the culture of an organization as well as required skill sets This position is responsible for assembling, disassembling, modifying, and repairing machines and/or various component parts and sub-assemblies for all products. This position also requires the flexibility to act autonomously at all times while adhering to overall department and company policies and procedures. Duties & Responsibilities: Positions and assembles parts according to verbal instructions, written directions, reading blueprints, and schematics, sample visual aids of knowledge of units being assembled. Follows instructions as provided in the workstation and. Or directions from the Lead Assemblers, Sub-Line Leads, and Manufacturing Management. Performs simple assembly and testing of game machine components to ensure satisfactory performance. Fastens parts together with bolts, screws, speeds clips or other fasteners using hand and/or power tools or specialized equipment. Disassembles, partially or completely, slot machines and/or various assemblies or component parts for all products. Makes modifications or repairs as directed or indicted by state of configuration of machines and/or assemblies or component parts, using hand and/or power tools and specialized equipment. Sets up or takes down workstation daily or as required making sure area is clean and organized tools stored, power tools charging, floor swept, and debris disposed of in appropriate location. Assists in the loading and unloading of machines to and from transportation carrier. Maintains expected output quantity/ productivity of production line. Participates in company health and safety programs and complies with all company OSHA policies and procedures. Complies with the company's regulatory guidelines and corporate policies at all times. Follows all lawful employer safety and health rules. Reports hazardous conditions to Production Supervisor or Lead on duty at the time of incident. Reports any job-related injury or illness to management and seek treatment promptly. Maintains confidentiality regarding the company, products, and employee information. Performs other duties as assigned. Requirements & Qualifications: High School Diploma or GED /Mechanical certification is required. Entry level position. One or more years' experience working in a mechanical or technical manufacturing role is desired. Ability to communicate professionally and efficiently, both verbal and written with all levels of the business. Required to obtain and retain Gaming licensure(s). Experience using basic handheld mechanical tools Please contact MNCP Staffing for more details at 702-268-9781

Established North Las Vegas Manufacturer is looking for an entry Assembly. This person will be responsible to molded parts and verify quantity of parts made. Candidate must demonstrate a desire to learn and have a positive can-do attitude Must have the ability to stand, walk, kneel, push, pull and lift up to 50 lbs Must be able to work safely on a machine that operates at high temperatures Must be able to accurately and timely count parts in many shapes and sizes Must be computer literate and have the ability to learn and accurately perform data entry in a windows-based software Must be punctual and maintain regular attendance Ability to perform duties inside a warehouse environment Follow safety guidelines and demonstrate good work ethic Education/Training High School Diploma or equivalent Salary $12 DOE Work Environment The work environment is in a non-airconditioned and non-heated warehouse. Full or Part-Time Assembler of Electrical Connectors. Entry level or experienced, will train. Monday through Friday, weekends off. Benefits after 60 days, PTO after 90 and 401K after 1 year. We offer a great working environment, We are a family owned company and have been in business for over 59 years.

Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, services, and solutions for the LNG and industrial gases industry. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with over $1.5 B in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange Job Overview We are currently seeking an Assembler to join our production team. This position is located at our facility in North Las Vegas, NV. Responsibilities Performs assembly of Cryogenic Pump Components and skidding as well as other tasks as assigned: Fit, align, and adjust all components, including bearings and seals and units to close tolerances and document all clearances on assembly clearance data sheet for review and approval of engineering. Check work to ensure conformance to specifications, instructions customer requirements on all drawings/blueprints and work instructions per SOP procedures. May require troubleshooting and rework parts as necessary, contribute to failure analysis when requested. Maintain tools, equipment, and work area in accordance with 5S principles. Follow all Quality, Engineering, Sales and Safety Procedures. Maintain consistent and regular attendance to meet production schedules. Ability to carefully disassemble used pumps and equipment and analyze condition of parts for possible causes of damage by operation in the field and improve reliability and customer service Keeps equipment operational by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. Meet Customer schedules and company production schedules at better than 80% on time Qualifications Preferred experience in reading blueprint, torque vales and inspection tools. Preferred general welding experience (Tig and Mig) Preferred experience in tube bending/flaring/threading Physical Demands In order to perform the duties of this job, the employee may be required to stand, walk, sit, reach with hands and arms, climb or balance, stoop or kneel, talk and hear, and use fingers and hands to feel objects, tools or controls. Ability to lift up to 25 lbs. may be necessary. Overtime may be necessary as the workload dictates. This may include week days, weekends, nights and/or holidays. Work Environment This job operates in a warehouse environment. This role routinely utilizes the operation of material handling equipment and various tools and machinery. Environmental Safety Requirements New Employee Safety Training is required by all newly hired employees, including Safety Awareness All safety related training is provided and tracked by the EHS Manager Job specific training modules deemed necessary by employee's Manager or Director will be required of all employees on an ongoing basis Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employees are required to wear Nikkiso provided PPE as/when needed. PPE's include, safety shoes, safety glasses, face shields, FR clothing, cryogenic gloves, cryogenic apron, cut resistant gloves, safety gloves, hearing protection, hard hats & dust masks. Failure to comply with safety requirements will result in disciplinary actions, up to and including termination. The knowledge, skills and abilities listed above are typically acquired through the levels of education and experience listed. An equivalent combination of education and/or experience that provides an applicant with the listed knowledge, skills and abilities required to perform the essential duties and responsibilities of the job, may be accepted. EEOC Statement Nikkiso CE&IG is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Job Details Entry Las Vegas, NV - Las Vegas, NV Part Time Not Specified $17.00 - $30.00 Hourly Negligible Day General LaborDescription NWS Professional Assembly is seeking Part-Time candidates for the position of Assembly Technician. As an Assembly Technician with NWS, you will be working on-site at our retail client, Lowes, assembling their various products and displays. Products we assemble for Lowes include, Barbeque grills, Wheelbarrows, Toolboxes, Patio Furniture, Lawn/Garden equipment, and various seasonal products. We are seeking 2-3 days per week of availability. This is a Day-Shift position. Here at NWS, you're rewarded for your performance, with our piecework pay model you can earn up to $30 per hour depending on your productivity building merchandise. As you learn the products and develop good habits and techniques you will gain speed and your pay will go up accordingly. If you are the handy person your friends and family would ask to help assemble a barbecue or playset, then we want you to come and build for us! Responsibilities will include: Provide quality assembly and repair of products and merchandise, using manufacturer instructions while adhering to retailer rules and guidelines. Provide a great customer service experience, building and maintaining a positive relationship with clients. Check-in with Retailer management to confirm build list and inventory. Generate and complete invoices daily. Reports and communicates effectively to the Area Manager. Maintains a safe and clean workspace, leaving clients with a clean build area. Other responsibilities as outlined in the employee handbook. Qualifications Qualifications: Ability to pass a background test. Ability to pass a drug test. Must be at least 18 years old to apply. Basic hand tools, cordless screw gun and Mechanical aptitude. A smart phone and e-mail address. Internet access via a smart phone or mobile device. Reliable transportation Capable of working on your feet for extended periods of time. Kneel, bend, twist and lift 40+ pounds repeatedly. Experience is a plus, but we will train.

Shift: Monday - Thursday, 6AM - 4:30PM with availability to support overtime on Friday's and Saturday's depending on Production needs. We're leading the transition to zero-emission mobility. Alexander Dennis is a global leader in the design and manufacture of double deck buses and is the UK's largest bus manufacturer. At Alexander Dennis, and across NFI and our family of brands, we are helping to save the planet. Through our Sustainability Pledge, which guides our daily actions and long-term planning, we are passionate about creating a better product, a better workplace, and a better world. To learn more about our Environmental, Social, and Governance (ESG) journey check our website. Our diverse, dynamic and resourceful team members embrace challenges every day which makes us the successful international company that we are. Are you ready to embrace the challenge? Come build the future with us and apply directly to your dream job! Position Summary As a hands-on member of our Production team, you will play a critical role in the assembly and installation of major components for world-leading double-deck buses. This is not routine assembly work-our Production Assembly Workers help build complex, high-performance vehicles that serve communities globally and drive the transition to zero-emission mobility. You will work in a fast-paced, team-based environment where safety, precision, and quality are non-negotiable. Candidates with backgrounds in manufacturing, skilled trades, or mechanical assembly are strongly encouraged to apply, as this role offers the chance to develop specialized skills and grow within your assigned trade or build area. Why Join Us: Be part of a global leader in zero-emission mobility and sustainable transportation Structured 4-day work week: four 10-hour shifts, Monday-Thursday Continuous training and development (over $15.9M invested in 2024) Advancement opportunities across the NFI Group family of companies Opportunity to learn cutting-edge EV and hybrid bus technologies What You Will Do Interpret and follow blueprints, schematics, and process documentation to assemble and install structural, electrical, and mechanical components. Use a variety of hand, pneumatic, and power tools to complete assemblies to specification. Execute precise installations and alignments using measurement tools (tape measure, calipers, gauges, torque tools). Work collaboratively to meet daily performance and quality targets, ensuring first-time build accuracy. Troubleshoot and escalate build issues or misalignments in real-time. Maintain a clean and organized work area, following 5S and lean manufacturing principles. Participate in cross-training opportunities to expand skills and support production flexibility. Commit to all safety practices including PPE, lockout/tagout, and hazard prevention protocols. What You Need to be Successful 1-3 years' experience in manufacturing, skilled trades, or mechanical/electrical/structural assembly. (Heavy-duty vehicle or complex equipment assembly is an asset.) Proven ability to read and interpret blueprints, schematics, and build sheets. Proficiency with hand tools, power tools, and pneumatic equipment. Familiarity with measurement tools, torquing, fitting, and alignment practices. Strong mechanical aptitude with problem-solving and troubleshooting skills. Reliable and punctual with the ability to work regular shifts and overtime as required. Physical ability to stand for extended periods, lift up to 50 lbs., and work in elevated or confined spaces with required PPE. Valid CDL certification is an asset but not required. Physical requirements: Regularly lift up to 10 lbs., frequently up to 25 lbs., and occasionally up to 50 lbs. Must be able to stand for extended periods, perform repetitive tasks, bend, stoop, reach, climb ladders, and work at heights. Exposure to vibration and moving mechanical parts is common. Our Why We move people. The world's most precious cargo. We are driven by our purpose: we move people. Our vision is to lead the evolution of sustainable on-road mass transportation and mobility and our mission is to design, deliver, and support market-leading bus and motor coach solutions that are safe, accessible, efficient, and reliable. IND-H

* Read, interpret, and follow technical documentation such as build guides, blueprints, diagrams, engineering drawings, specifications, and other written instructions or procedures to accurately assemble mechanical components and fabricated products. * Perform assembly tasks with experience and proficiency at most of the mechanical assembly and sub-assembly stations. * Performs calibration tests on parts and mechanisms for tolerance levels and quality; identifies failed quality and out of tolerance units, and repairs as necessary. * Maintain a clean and safe work area. * Assisting in other areas on the production floor as needed. * Performs other duties as assigned. PREFERRED QUALIFICATIONS * High school diploma or GED * No experience needed, will train. * Ability in using tools (e.g. drills, wrenches, screwdrivers, etc.) * Willing to perform repetitive tasks while standing for extended periods of time. * Maintains excellent attendance. * Pre-employment drug screen and background check are required BENEFITS * Health Insurance * Dental Insurance * Vision Insurance * Supplemental Insurance * Paid Time Off (PTO) * Paid Holidays * On job training * Cross-training * Opportunities for advancement PHYSICAL DEMANDS * Must be able to stand, walk and lift for up to 8 hours daily. * Vision abilities requires close, distance, color, peripheral, and depth * Required to lift, push, pull, and/or carry up to 50 lbs. continually. * May be required to stoop, bend, kneel, or crouch. * Moderately loud noise levels in plant environment. * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. JOB TYPE * Full-time * Hourly SCHEDULE * 8-hour shift * Day shift * Monday to Friday ABOUT VSR INDUSTRIES VSR Industries has been a world leader for over 50 years in the casino gaming industries, manufacturing high security locks, custom fabricated sheet metal, and wood products. Corporate headquarters and manufacturing plants are located in Henderson, NV. VSR Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex. Sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable federal, state or local law.

Gaming: Welcome to the world of land-based gaming. At Light & Wonder, it's all about the games, and our Gaming team builds cutting-edge technology, products, and content for the most iconic casinos and operators across the globe. The Assembler focus specializes in the assembly of a wide variety of electronic, electro-mechanical or measurement products or product components. Determines and follows methods and sequence of operations of different steps involved in the assembly. Makes setups and adjustments holding tolerances to blueprint specifications. Performs a wide variety of electronic, electro-mechanical, mechanical or measurement product assembly operations on product components, assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable harnessing, welding and fitting on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications. Incumbents who operate automatic or semi-automatic machines to perform assembly operations should be matched to Machine Operator. Employees working in technology-related production roles that are not electronics-based hardware manufacturing jobs should be matched to Machine Operator. Solar/Alternative Energy companies should match individuals who are assembling individual cells or portions of arrays and panels here. Individuals who are operating large-scale manufacturing machinery to assemble panels and arrays should be matched to Machine Operator. Incumbents who are assembling test kits or similar groupings of finished items into complete packages should be matched to Package Assembler. Qualifications Position Summary: A Production Test Tech Lead focuses on testing and quality assurance in manufacturing or hardware environments, while a Media Tech Lead oversees technical operations in media production, including broadcast, streaming, or digital content workflows Additional Responsibilities: Lead testing operations for electronic or mechanical products during production. Develop and implement test plans , procedures, and protocols. Troubleshoot and resolve issues with test equipment and product failures. Collaborate with engineering and manufacturing teams to improve product quality. Train and mentor junior technicians and ensure compliance with safety and quality standards. Minimum Qualifications: Minimum 5 years of experience in testing and troubleshooting electronic equipment. Proficiency in schematics, technical drawings , and test equipment . Strong analytical and problem-solving skills . Familiarity with Lean, Six Sigma , or other process improvement methodologies. Excellent communication and leadership abilities . · Oversee technical infrastructure for media production, including audio, video, and digital platforms. Manage media workflows , ensuring smooth operation from capture to distribution. Coordinate with creative teams to support production needs. Maintain and upgrade equipment , software, and network systems. Ensure compliance with broadcast standards and digital media regulations. Preferred Traits, Knowledge, Skills, and Abilities: · Experience in broadcast engineering, video production , or digital media tech. Proficiency in editing software , media asset management systems, and streaming platforms . Strong understanding of AV systems, encoding , and file formats . Ability to lead cross-functional teams and manage multiple projects. Knowledge of emerging media technologies and trends. Physical Requirements: Mobility & Stamina Standing or walking for extended periods (often 8+ hours per shift). Climbing ladders or stairs to access equipment or workstations. Bending, kneeling, or crouching to inspect or repair components. Manual Dexterity Using hand tools and test equipment with precision. Handling small parts and delicate instruments. Typing and data entry for logging test results and documentation. Strength & Lifting Lifting and carrying equipment or components typically up to 25-50 lbs. Pushing or pulling carts or test stations as needed. Work Conditions: Good vision (corrected or uncorrected) for reading schematics, displays, and inspecting components. Color vision may be required for identifying wires or indicators. Hearing acuity to detect alarms, signals, or verbal instructions in noisy environments. Environmental Conditions Working in lab or production floor settings with exposure to noise, dust, or temperature variations. Wearing PPE such as safety glasses, gloves, or ESD protection. Other Considerations Ability to work flexible hours , including overtime or shifts. Comfort with repetitive tasks and maintaining focus during detailed testing procedures. The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable Light & Wonder Corporation and its affiliates are engaged in highly regulated gaming and lottery businesses. As a result, certain Light & Wonder may, among other things, be required to obtain a gaming or other license(s), undergo background investigations or security checks, or meet certain standards dictated by law, regulation or contracts. In order to ensure L&W complies with its regulatory and contractual commitments, as a condition to hiring and continuing to employ its employees, L&W requires all of its employees to meet those requirements that are necessary to fulfill their individual roles. As a prerequisite to employment with L&W (to the extent permitted by law), you shall be asked to consent to L&W conducting a due diligence/background investigation on you. This job description should not be interpreted as all-inclusive; it is intended to identify major responsibilities and requirements of the job. The employee in this position may be requested to perform other job-related tasks and responsibilities than those stated above. Light & Wonder is an Equal Opportunity Employer and does not discriminate against applicants due to race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. If you'd like more information about your equal employment opportunity rights as an applicant under the law, please click here for EEOC Poster.

Gaming: Welcome to the world of land-based gaming. At Light & Wonder, it's all about the games, and our Gaming team builds cutting-edge technology, products, and content for the most iconic casinos and operators across the globe. The Assembler focus specializes in the assembly of a wide variety of electronic, electro-mechanical or measurement products or product components. Determines and follows methods and sequence of operations of different steps involved in the assembly. Makes setups and adjustments holding tolerances to blueprint specifications. Performs a wide variety of electronic, electro-mechanical, mechanical or measurement product assembly operations on product components, assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable harnessing, welding and fitting on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications. Incumbents who operate automatic or semi-automatic machines to perform assembly operations should be matched to Machine Operator. Employees working in technology-related production roles that are not electronics-based hardware manufacturing jobs should be matched to Machine Operator. Solar/Alternative Energy companies should match individuals who are assembling individual cells or portions of arrays and panels here. Individuals who are operating large-scale manufacturing machinery to assemble panels and arrays should be matched to Machine Operator. Incumbents who are assembling test kits or similar groupings of finished items into complete packages should be matched to Package Assembler. Qualifications Position Summary: A Production Test Tech Lead focuses on testing and quality assurance in manufacturing or hardware environments, while a Media Tech Lead oversees technical operations in media production, including broadcast, streaming, or digital content workflows Additional Responsibilities: * Lead testing operations for electronic or mechanical products during production. * Develop and implement test plans, procedures, and protocols. * Troubleshoot and resolve issues with test equipment and product failures. * Collaborate with engineering and manufacturing teams to improve product quality. * Train and mentor junior technicians and ensure compliance with safety and quality standards. Minimum Qualifications: * Minimum 5 years of experience in testing and troubleshooting electronic equipment. * Proficiency in schematics, technical drawings, and test equipment. * Strong analytical and problem-solving skills. * Familiarity with Lean, Six Sigma, or other process improvement methodologies. * Excellent communication and leadership abilities. * Oversee technical infrastructure for media production, including audio, video, and digital platforms. * Manage media workflows, ensuring smooth operation from capture to distribution. * Coordinate with creative teams to support production needs. * Maintain and upgrade equipment, software, and network systems. * Ensure compliance with broadcast standards and digital media regulations. * Preferred Traits, Knowledge, Skills, and Abilities: * Experience in broadcast engineering, video production, or digital media tech. * Proficiency in editing software, media asset management systems, and streaming platforms. * Strong understanding of AV systems, encoding, and file formats. * Ability to lead cross-functional teams and manage multiple projects. * Knowledge of emerging media technologies and trends. * Physical Requirements: Mobility & Stamina * Standing or walking for extended periods (often 8+ hours per shift). * Climbing ladders or stairs to access equipment or workstations. * Bending, kneeling, or crouching to inspect or repair components. Manual Dexterity * Using hand tools and test equipment with precision. * Handling small parts and delicate instruments. * Typing and data entry for logging test results and documentation. Strength & Lifting * Lifting and carrying equipment or components typically up to 25-50 lbs. * Pushing or pulling carts or test stations as needed. Work Conditions: * Good vision (corrected or uncorrected) for reading schematics, displays, and inspecting components. * Color vision may be required for identifying wires or indicators. * Hearing acuity to detect alarms, signals, or verbal instructions in noisy environments. Environmental Conditions * Working in lab or production floor settings with exposure to noise, dust, or temperature variations. * Wearing PPE such as safety glasses, gloves, or ESD protection. Other Considerations * Ability to work flexible hours, including overtime or shifts. * Comfort with repetitive tasks and maintaining focus during detailed testing procedures. The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable Light & Wonder Corporation and its affiliates are engaged in highly regulated gaming and lottery businesses. As a result, certain Light & Wonder may, among other things, be required to obtain a gaming or other license(s), undergo background investigations or security checks, or meet certain standards dictated by law, regulation or contracts. In order to ensure L&W complies with its regulatory and contractual commitments, as a condition to hiring and continuing to employ its employees, L&W requires all of its employees to meet those requirements that are necessary to fulfill their individual roles. As a prerequisite to employment with L&W (to the extent permitted by law), you shall be asked to consent to L&W conducting a due diligence/background investigation on you. This job description should not be interpreted as all-inclusive; it is intended to identify major responsibilities and requirements of the job. The employee in this position may be requested to perform other job-related tasks and responsibilities than those stated above. Light & Wonder is an Equal Opportunity Employer and does not discriminate against applicants due to race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. If you'd like more information about your equal employment opportunity rights as an applicant under the law, please click here for EEOC Poster.

Full-time Description ENTEK is seeking applications for multiple Assembly Technicians to join us on-site at our Henderson, Nevada, location (relocation within 40 miles of Henderson is required). As an Assembly Technician at ENTEK, you will assemble products, following blueprints, schematic drawings, and specifications, using bolts or other fastening devices to attach them to foundations or other structures. In your daily work as an ENTEK Assembly Technician, you will have the opportunity to utilize your experience to install moving parts, such as shafts, levers, or bearings, and work them to test proper movement and assemble gear systems using alignment & measurement tools while ensuring proper assembly tolerances. You will also bend and install pipe for hydraulic systems and perform layout, prep, assembly, and installation of threaded and grooved pipe. To ensure the quality and integrity of final products, you will test (or assist with testing), analyze, troubleshoot, and correct machine issues. You will participate in equipment maintenance on a daily and monthly basis. As needed and/or assigned, you will train other employees on department procedures to support the department's success and enhance quality and output. Requirements Minimum Qualifications High school diploma or GED. Four (4) years of applicable experience and/or training OR an equivalent combination of education and experience. Basic math skills Strong time-management skills. Ability to self-manage behavior. Ability to communicate effectively in written and spoken English. Ability to read, analyze, and interpret supplied documentation and instructions. Ability to define problems, establish facts, and draw valid conclusions. Satisfactory results from a pre-employment fit-for-duty screen and a drug screen. Preferred Qualifications Trade school program certificate. Two to four years related experience and/or training. Working Environment The hours for this role are Monday-Friday, 7:00 a.m. - 4:00 p.m. This role is based in a manufacturing shop environment, which may require the employee to work with or near equipment that uses water / high heat / mechanical means to create metal-based products. The incumbent will spend most of their 8-hour shifts on their feet. This role requires the incumbent to regularly lift and/or move up to 30 pounds, frequently lift and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds. Incumbents will complete tasks that require finger dexterity, reaching, handling of materials and tools/and equipment, talking, and hearing, as well as near and far sight, peripheral vision, and depth perception. The individual in this role may be required to kneel, stoop, crouch, climb, and/or balance. The role may occasionally expose the employee to fumes and airborne particles, as well as temporarily high temperatures and temporarily bright light. This role requires wearing eye and hearing protection while working. About ENTEK ENTEK's DNA is based on a set of core values, which drive everything we do: Respect, Integrity, Innovation, and Commitment. Stop by our website at ************* to learn more about our company and the opportunities that await you. ENTEK is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. ENTEK's locations are non-smoking. Please inquire if you have questions.

Responsible for working on the assembly line and producing our product based on specific schematics. You'll also oversee inspecting products, packing boxes, unloading materials onto the assembly line, and adhering to safety protocols. Duties/Responsibilities. • Building products on the assembly line according to drawings, instructions, or schematics. • Following established safety and efficiency procedures to ensure that operations run smoothly. • Inspecting assembled products for any faults or defects. • Loading product pieces slated for assembly onto the line and packing assembled products into boxes for storage. • Stopping the assembly line and halting production if machinery fails or a major defect is detected. • Maintaining a record of mechanical repairs and adjustments. • Reporting incidents, faulty operations, or product imperfections on the assembly line to management • Any other duty as assigned. Supervisory Responsibilities: None RequirementsRequired Skills/Abilities: • Solid understanding of production machinery and proper assembly procedures. • Excellent knowledge of manufacturing safety protocols and regulations. • Ability to read and interpret technical drawings, blueprints, and schematics. • Ability to work under pressure in a fast-paced environment. • Good physical stamina and the ability to lift heavy pieces of equipment, as well as stand for hours at a time. Education/Experience Required: • A high school diploma or equivalent qualification. • At least 2 years' experience working on an assembly line Physical Requirements: • Long periods of time standing, stooping, sitting, etc. • Must be able to lift up to 50 pounds at times. American Locker is dedicated to following the EEO policy to recruit, train and hire regardless of race, color, creed, national origin, sex, religious affiliation and any other category that falls under Title VII of the 1965 Civil Rights Act, Age Discrimination in Employment Act, or the Americans with Disability Act. EEO/M/F/V/D BenefitsYou'll have opportunities to advance. We're fans of helping our employees learn different aspects of the business, be challenged with new tasks, mentored, and grow. We celebrate one another's differences and ideas. We're proud of our culture of diversity and inclusion - and, we have programs that bring us together on important issues and provide educational opportunities for all employees A generous benefits package (Medical, Vision, Dental) 401K with employer match Accrued Paid Time Off Accrued Paid Sick Leave

Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, services, and solutions for the LNG and industrial gases industry. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with over $1.5 B in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange Job Overview We are currently seeking an Assembler to join our production team. This position is located at our facility in North Las Vegas, NV. Responsibilities * Performs assembly of Cryogenic Pump Components and skidding as well as other tasks as assigned: * Fit, align, and adjust all components, including bearings and seals and units to close tolerances and document all clearances on assembly clearance data sheet for review and approval of engineering. * Check work to ensure conformance to specifications, instructions customer requirements on all drawings/blueprints and work instructions per SOP procedures. * May require troubleshooting and rework parts as necessary, contribute to failure analysis when requested. * Maintain tools, equipment, and work area in accordance with 5S principles. * Follow all Quality, Engineering, Sales and Safety Procedures. * Maintain consistent and regular attendance to meet production schedules. * Ability to carefully disassemble used pumps and equipment and analyze condition of parts for possible causes of damage by operation in the field and improve reliability and customer service * Keeps equipment operational by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs. * Meet Customer schedules and company production schedules at better than 80% on time Qualifications * Preferred experience in reading blueprint, torque vales and inspection tools. * Preferred general welding experience (Tig and Mig) * Preferred experience in tube bending/flaring/threading Physical Demands * In order to perform the duties of this job, the employee may be required to stand, walk, sit, reach with hands and arms, climb or balance, stoop or kneel, talk and hear, and use fingers and hands to feel objects, tools or controls. * Ability to lift up to 25 lbs. may be necessary. * Overtime may be necessary as the workload dictates. This may include week days, weekends, nights and/or holidays. Work Environment This job operates in a warehouse environment. This role routinely utilizes the operation of material handling equipment and various tools and machinery. Environmental Safety Requirements * New Employee Safety Training is required by all newly hired employees, including Safety Awareness * All safety related training is provided and tracked by the EHS Manager * Job specific training modules deemed necessary by employee's Manager or Director will be required of all employees on an ongoing basis Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employees are required to wear Nikkiso provided PPE as/when needed. PPE's include, safety shoes, safety glasses, face shields, FR clothing, cryogenic gloves, cryogenic apron, cut resistant gloves, safety gloves, hearing protection, hard hats & dust masks. Failure to comply with safety requirements will result in disciplinary actions, up to and including termination. The knowledge, skills and abilities listed above are typically acquired through the levels of education and experience listed. An equivalent combination of education and/or experience that provides an applicant with the listed knowledge, skills and abilities required to perform the essential duties and responsibilities of the job, may be accepted. EEOC Statement Nikkiso CE&IG is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

We are a leading casino gaming equipment manufacturer specializing in state-of-the-art electronic gaming and slot machines. Our team is dedicated to quality, innovation, and delivering exceptional products to gaming venues worldwide. We are seeking detail-oriented and reliable Assemblers to join our production team in Henderson. **Position Summary:** The Production Line Assembler is responsible for assembling components and parts used in electronic slot machines. This role involves hands-on work with mechanical and electronic components, ensuring each machine meets quality and safety standards before shipment. **Responsibilities:** + Assemble electronic and mechanical components according to production drawings, schematics, and work instructions + Install wiring, circuit boards, harnesses, buttons, screens, and other components + Use hand tools, power tools, and basic testing equipment safely and effectively + Perform routine quality checks to ensure proper function and alignment of components + Assist in troubleshooting basic assembly issues + Maintain a clean and organized work area + Follow all safety guidelines and manufacturing procedures + Meet daily production targets and deadlines + Collaborate with team members and supervisors to maintain workflow efficiency **Qualifications:** + High school diploma or equivalent preferred + Previous experience in assembly, electronics, or manufacturing is a plus but not required + Ability to follow detailed instructions and technical documentation + Good manual dexterity and ability to work with small parts + Basic understanding of hand tools and electrical components + Strong attention to detail, reliability, and teamwork + Ability to stand for extended periods and lift up to 25 lbs **Benefits:** + Competitive hourly wage + Consistent Monday-Friday schedule + Opportunities for skill development and growth within the company **Pay Details:** $15.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Founded in 1989, Desert Lumber and Building Materials supplies customers with specialty building materials from multiple locations across Las Vegas, NV. Operations that include 2 Lumber Yards, Floor and Roof Truss Manufacturing, Desert Fasteners, and Desert Window Systems. . The Seasonal Truss Assembler I is responsible for assembling truss components. This position will stock lumber, plates and other work-related materials and supplies. Will also band/stack finished products. What you will do • Lay out truss supplies and materials on carts or floor and stock plates for component set-up. • Assemble components under the direction of the line leaders. • Load and band finished materials on carts/pallets inside and/or outside. • Receive incoming products, commodities, and materials. • Read shop drawings to identify plate sizes, plate gauges, girder truss nailing and bolt patterns. • Read shop drawings to understand stacking order when required. • Monitor production workflow process assisting other areas as needed. • Operate all equipment necessary to the assembly process. • Adhere to established safety rules and regulations and follows all safety procedures; maintain a safe environment. • Comply with Company's attendance policy by maintaining regular and predictable attendance. • Assist in maintaining an organized work environment which may include emptying trash receptacles and keeping all bays/staging areas clean and organized. • Provide excellent customer service and participate in a positive work environment. • Monitor inventory as required by location management. • Retain an awareness of the work environment critical to the task at hand to produce error free and damage free results. • Participate in and complete assigned trainings. Required For All Jobs • Perform other duties as assigned. • Comply with all policies and standards. • Adheres to Company's commitment to workplace safety. Education Qualifications • High School Diploma or equivalent work experience required. Experience Qualifications • Prior carpentry experience preferred. Skills and Abilities • Must be able to read a tape measure and use a hammer. • Ability to learn to operate equipment such as routers, saws, presses, and staple guns. Additional Potential Opportunities based on experience: • Truss Assembler II • Truss Assembler III • Truss Assembly Lead . Desert Companies , a Division of US LBM Holdings, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.

Assembly Earn extra income on your terms! Join Airtasker, the community platform connecting people ready to work with those who need jobs done. With Airtasker, you decide when and where you work-choose tasks that match your skills, set your own rates, and work as much or as little as you want. No startup fees, no monthly costs-just a straightforward way to turn any skill into extra income or build a career at your own pace. Complete tasks like regular furniture assembly, trampoline assembly, excercise equipment assembly and more! Get started today! Why Join Airtasker? Flexible income: Be your own boss, set your own hours, and choose tasks that fit your schedule. Easy start: Most tasks require no special licensing or vetting, so you can start right away. Wide variety of tasks: Find everything from handyman work and pet care to skilled trades and creative gigs. Build your reputation: Stand out with reviews, earn badges, and increase your visibility to customers. Lower fees for loyal Taskers: Complete more tasks to enjoy lower service fees over time. Requirements: Age 18 or older Own an iPhone or Android smartphone Have the tools and skills for accepted jobs Commit to excellent customer service Keep work on the platform so we both earn! No need to apply-simply sign up on Airtasker.com, browse available tasks, and start making offers today! Start earning now!

Established North Las Vegas Manufacturer is looking for an entry Assembly. This person will be responsible to molded parts and verify quantity of parts made. Candidate must demonstrate a desire to learn and have a positive can-do attitude Must have the ability to stand, walk, kneel, push, pull and lift up to 50 lbs Must be able to work safely on a machine that operates at high temperatures Must be able to accurately and timely count parts in many shapes and sizes Must be computer literate and have the ability to learn and accurately perform data entry in a windows-based software Must be punctual and maintain regular attendance Ability to perform duties inside a warehouse environment Follow safety guidelines and demonstrate good work ethic Education/Training High School Diploma or equivalent Salary $12 DOE Work Environment The work environment is in a non-airconditioned and non-heated warehouse. Full or Part-Time Assembler of Electrical Connectors. Entry level or experienced, will train. Monday through Friday, weekends off. Benefits after 60 days, PTO after 90 and 401K after 1 year. We offer a great working environment, We are a family owned company and have been in business for over 59 years. Full-Time/Part-Time Full-Time and/or Part-Time About the Organization Spacecraft Components Corp. engineers, distributes, and manufactures circular harsh environment connectors primarily focused in railways/transit, military, aerospace, industrial and various harsh environment markets. We pride ourselves in the excellence of service by providing reactive and consultative circular connector solutions by utilizing our talented engineering and technical sales resources. Our AS9100 qualification ensures that our overall processes provide our customers the highest obtainable of quality standards. EOE Statement The Company is an Equal Employment Opportunity employer and makes employment decisions on the basis of merit. In accordance with applicable law, the Company prohibits discrimination based on race, color, religion, gender, sexual orientation, national origin, age, disability, veteran status or any other characteristic protected by applicable law. All such discrimination is prohibited. The Company's commitment to equal opportunity applies to all persons involved in the operations of the Company and prohibits discrimination by any employee or agent of the Company, including supervisors and coworkers. Position Requirements Good hand dexterity, able to work alone as well as with a team, able to follow instructions and attention to detail. Position Assembly Open Date 9/18/2025 <

Job Description Shift: Monday - Thursday, 6AM - 4:30PM with availability to support overtime on Friday's and Saturday's depending on Production needs. We're leading the transition to zero-emission mobility. Alexander Dennis is a global leader in the design and manufacture of double deck buses and is the UK's largest bus manufacturer. At Alexander Dennis, and across NFI and our family of brands, we are helping to save the planet. Through our Sustainability Pledge, which guides our daily actions and long-term planning, we are passionate about creating a better product, a better workplace, and a better world. To learn more about our Environmental, Social, and Governance (ESG) journey check our website. Our diverse, dynamic and resourceful team members embrace challenges every day which makes us the successful international company that we are. Are you ready to embrace the challenge? Come build the future with us and apply directly to your dream job! Position Summary As a hands-on member of our Production team, you will play a critical role in the assembly and installation of major components for world-leading double-deck buses. This is not routine assembly work-our Production Assembly Workers help build complex, high-performance vehicles that serve communities globally and drive the transition to zero-emission mobility. You will work in a fast-paced, team-based environment where safety, precision, and quality are non-negotiable. Candidates with backgrounds in manufacturing, skilled trades, or mechanical assembly are strongly encouraged to apply, as this role offers the chance to develop specialized skills and grow within your assigned trade or build area. Why Join Us: Be part of a global leader in zero-emission mobility and sustainable transportation Structured 4-day work week: four 10-hour shifts, Monday-Thursday Continuous training and development (over $15.9M invested in 2024) Advancement opportunities across the NFI Group family of companies Opportunity to learn cutting-edge EV and hybrid bus technologies What You Will Do Interpret and follow blueprints, schematics, and process documentation to assemble and install structural, electrical, and mechanical components. Use a variety of hand, pneumatic, and power tools to complete assemblies to specification. Execute precise installations and alignments using measurement tools (tape measure, calipers, gauges, torque tools). Work collaboratively to meet daily performance and quality targets, ensuring first-time build accuracy. Troubleshoot and escalate build issues or misalignments in real-time. Maintain a clean and organized work area, following 5S and lean manufacturing principles. Participate in cross-training opportunities to expand skills and support production flexibility. Commit to all safety practices including PPE, lockout/tagout, and hazard prevention protocols. What You Need to be Successful 1-3 years' experience in manufacturing, skilled trades, or mechanical/electrical/structural assembly. (Heavy-duty vehicle or complex equipment assembly is an asset.) Proven ability to read and interpret blueprints, schematics, and build sheets. Proficiency with hand tools, power tools, and pneumatic equipment. Familiarity with measurement tools, torquing, fitting, and alignment practices. Strong mechanical aptitude with problem-solving and troubleshooting skills. Reliable and punctual with the ability to work regular shifts and overtime as required. Physical ability to stand for extended periods, lift up to 50 lbs., and work in elevated or confined spaces with required PPE. Valid CDL certification is an asset but not required. Physical requirements: Regularly lift up to 10 lbs., frequently up to 25 lbs., and occasionally up to 50 lbs. Must be able to stand for extended periods, perform repetitive tasks, bend, stoop, reach, climb ladders, and work at heights. Exposure to vibration and moving mechanical parts is common. Our Why We move people. The world's most precious cargo. We are driven by our purpose: we move people. Our vision is to lead the evolution of sustainable on-road mass transportation and mobility and our mission is to design, deliver, and support market-leading bus and motor coach solutions that are safe, accessible, efficient, and reliable. IND-H

Under direct supervision, performs one or more repetitive jobs on an assembly or sub-assembly line to produce building material components or millwork products. * Assembles building material components such as wall panels, roof and floor trusses and/or millwork products such as doors, windows, cabinets, counters, vanities or closets. Processes include insertion or positioning of materials, clamping, splicing, fitting parts and use of both hand and power tools. Requirements: High school diploma or General Education Degree (GED) or related work experience. This is an entry level position where the incumbent will receive on-the-job training. Knowledge of and ability to use a variety of hand and power tools to assemble either building materials components or millwork products.

Under direct supervision, performs one or more repetitive jobs on an assembly or sub-assembly line to produce building material components or millwork products. * Assembles building material components such as wall panels, roof and floor trusses and/or millwork products such as doors, windows, cabinets, counters, vanities or closets. Processes include insertion or positioning of materials, clamping, splicing, fitting parts and use of both hand and power tools. Requirements: High school diploma or General Education Degree (GED) or related work experience. This is an entry level position where the incumbent will receive on-the-job training. Knowledge of and ability to use a variety of hand and power tools to assemble either building materials components or millwork products.