Assembler jobs in Lynn, MA

Adecco Staffing is working with a Manufacturing Company in Hudson, NH who is looking to hire additional Cable Assemblers! This is a full time, temp-to-hire position. Cable Assembler Pay: $20.00 - $23.00 per hour based on experience Hours: Monday through Thursday are 9 hour days with every other Friday being an 8 hour day (split between work weeks) and he alternating Friday off. The regular start and end time for each day is as follows: Start time is 7:00am, Monday through Friday End Time is 4:30pm, Monday through Thursday End time is 3:30pm, Friday Basic Function: To assemble products in accordance with established standards, with emphasis Box Build and more complex mechanical assembly. Responsibilities: Assemble assigned product parts on assembly line in accordance with production guidelines. Read and understand drawings, travelers, bills of material. Use measuring tools, crimp tools, wire cutting equipment and stripping machines. Hand crimping, Spot tie and continuous lacing. Heat shrink sleeving and boots. Solder pins, contacts and solder cups, solder sleeves, bus wire splice. Pot assemblies as required and clean molds. Perform spot checks of products to ensure adherence to approved quality standards. Notify management of product discrepancies or equipment malfunctions. Adhere to established company policies and procedures paying special attention to safety regulations. Wear personal protective equipment in accordance with training guidelines. Maintain an organized and clean work area. Perform other related duties as assigned. Skills: Oral Communication Skills IPC-610, IPC-620 training Time Management Written Communication Skills Ability to lift up to 10 pounds Reading Skills Physical Dexterity Mechanical skills Figure and Math Aptitude Education/Training: Degree: High School Diploma or Equivalent If you are interested in this position or others available, please apply! Pay Details: $20.00 to $23.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Production Assembler Amphenol Ardent Concepts is a leading designer and manufacturer of high performance multicoax and coaxial assemblies, connectors, and sockets used in the development of next generation semiconductors and electronics systems. Our core technology is the smallest, fastest, and most electrically efficient compression mount connector technology worldwide. As data rate requirements increase and devices and systems shrink, Ardent Concept's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. No experience necessary. Willing to train crew members who demonstrate excellent hand/eye coordination with microscopic parts, who otherwise qualify. Candidates that have experience with arts and crafts, small model building, jewelry making, or small intricate mechanical devices may have the skills applicable to work with these micro assembly products. This is a full time, first shift position. The hours are Monday through Thursday, 7:00am to 5:30pm. RESPONSIBILITIES: Micro assembly product lines while working through microscope Prepare and assemble materials, build product subassemblies or final assemblies, plate product. Test and inspect products or subassemblies for functionality and quality. Set up and operate production fixtures and tools in accordance with good manufacturing practices and standard operating procedures. Inspect finished products for quality and adherence to engineering prints. Adhere to all applicable regulations, policies, and procedures for health, safety and environmental compliance. Clean production equipment, products, and work areas. Measure and record data associated with products. Other tasks as assigned by supervisor. QUALIFICATIONS: High level of hand/eye coordination with ability to work extended periods on a microscope Ability to perform mathematical calculations Familiarity with engineering drawings is preferred High school diploma or equivalent Physical agility This job operates in a lab/manufacturing setting. While performing the duties of this job, the employee is frequently exposed to fumes and moving mechanical parts. The noise level in the work environment can be loud. Computers and machines are used, and the employee must be coordinated and have the ability to lift and or move up to 25 lbs. Specific vision abilities required by this job include close, distance, color, and peripheral vision. Must have depth perception and ability to adjust focus.

Salary Description $21.00-$35.00/hour

Apply now Job Title: Assembler- Taunton, MA Division: Distribution Posting Area: Operations + Manufacturing Looking for stability? Join Woodgrain! We're growing fast and offering lifetime careers in a supportive work environment. About Woodgrain: Woodgrain is one of the top millwork operations in the world, with locations throughout the United States and Chile. With 70 years of quality manufacturing craftsmanship and service, Woodgrain is a top producer of mouldings, doors, and windows, as well as a premier distributor of specialty building products. Woodgrain Inc. is headquartered in Fruitland, Idaho with six divisions and over 45 manufacturing and warehouse facilities in the United States and South America. Since 1954, Woodgrain is proud to be family owned and operated. Woodgrain is family-owned and one of the leading millworks and building products operations in the world. With over 65 years of product innovation, business growth, quality craftsmanship and service, Woodgrain is a leading producer of moulding, doors, and windows, as well as a premier distributor of specialty building products. Woodgrain, Inc. is headquartered in Fruitland, Idaho with six divisions and over 45 manufacturing and warehouse facilities throughout the United States and South America. Check us out at: ************************** What we bring to you: Compensation: $16.00-$17.50 (depending on experience) and quarterly bonus dependent on profitability. Woodgrain pays 75% of medical, dental and vision insurance. 401k matching, Woodgrain matches up to 3% of your base salary. PTO (2 weeks, 8 paid holidays, (1) floating holiday) Perks such as tuition reimbursement and large discounts off Woodgrain products What our ASSEMBLER does: Assembling the components of the job, which may include machining and/or assembling various millwork products such as exterior and interior door units. Operating machinery that modifies the product (ex. chop saws) Preparing the product for shipment by applying casing, sleeves, labels, etc. Inspecting the overall quality and accuracy of assembled product throughout the assembly process Repairing and disassembling returned or defective millwork to prepare it for resale or return to stock. Performing routine maintenance on all tools used including cleaning, oiling, checking to ensure proper functioning, calibrating machines, checking measuring tool accuracy, and notifying a supervisor of larger repairs or malfunctions. Working in a safe manner: Participating in all safety training and meetings Understanding and complying with the Company safety policy TOOLS USED: Include but are not limited to chop saw, table saw, rip saw, hand saw; router, nail gun, screw gun, door machine, various pneumatic tools, and drills. What you need to have: High School diploma or GED and one to two years' related experience and/or training; or equivalent combination of education and experience. Ability to read and comprehend instructions, correspondence, and memos. Ability to write correspondence, effectively present information in one-on-one or small group situations. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to perform these operations using weight measurements, volume, and distance. Might require forklift certification, depending upon branch requirements. Ability to solve practical problems and deal with a variety of concrete variables in situations where limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to understand branch and industry standards in identification, measurement, repairs, replacements, and modification of products. Woodgrain is an Equal Employment Opportunity Employer. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Woodgrain believes that diversity and inclusion among our employees is critical to our success, and we seek to recruit, develop, and retain the most talented people from a diverse candidate pool. Employment at Woodgrain is based on merit, competence, and qualifications, and we are committed to providing equal opportunities for training and advancement for all employees. Woodgrain is also committed to making our application process accessible to individuals with disabilities and will provide reasonable accommodation upon request. Woodgrain is a drug, alcohol, and tobacco free workplace. All offers of employment are contingent upon pre-employment background and drug screening, and some positions require a fitness for duty test. Summary of Company Benefits: * Health, Dental, and Vision Insurance * Health Savings Account (HSA) * Flexible Spending Account (FSA) * 401(k) with a Company Match * Group Term Life Insurance and AD&D * Employer Paid Long-Term & Short-Term Disability * Voluntary Supplemental Hospital and Accident Plans * Employee Assistance Program * 8 Company Paid Holidays & 1 Floating Holiday * Paid Time Off (PTO) Woodgrain is an Equal Employment Opportunity Employer. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Woodgrain is a drug, alcohol, and tobacco-free workplace. All offers of employment are contingent upon pre-employment background and drug screening, and some positions require a fitness for duty test.

Job Description Founded in 1957, Adcole is recognized as a world leader in the production of industrial metrology equipment. We design and manufacture machines for measuring precision cylindrical and/or rotating components such as EV drive and rotor shafts, camshafts, crankshafts, pump shafts, and robotic reducer shafts. Our customers span a variety of industries with our core base in the automotive, heavy/medium diesel, and industrial machinery markets. Adcole manufactures exclusively in Massachusetts for shipment to customers in the US and around the world. Headquartered in Marlborough Massachusetts, the company has approximately 100 employees in 5 locations worldwide. We have a highly talented and dedicated group of employees that develop and manufacture innovative products for our customers, with most employees having been with the company for over 15 years. These long tenures reflect the positive work environment at Adcole which has led many to stay with the company for their entire careers. Upon hire, all employees receive a generous benefits package, including medical/dental/vision coverage, tuition reimbursement, life/AD&D insurance, short and long-term disability, employee assistance program, 401K retirement plan, paid time off, sick time, and company holidays. Privately held and under new ownership, the company is aggressively investing in training, technology, and product innovation to grow significantly in the coming years. Position Summary Perform a wide variety of mechanical or measurement assembly operations on product components, assemblies or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable assembling, bonding and fitting on assembly units. Make setups and adjustments, holding tolerances to blueprint and test specifications. Reports to: Assembly Supervisor Job Duties Acquires job skills and learns all applicable company policies and procedures. Complete assigned tasks while following manufacturing, schedules, policies and procedures. Normally receives little instruction on daily work. Requires instructions on newly introduced assignments. Assumes responsibility for meeting schedules and quality of work. Act as a champion of the company's Lean and Continuous Improvement programs. Time and attendance are in accordance with company policies, procedures, and work area schedule. Complete work orders on schedule to ensure a constant flow of finished product to support production and customer service levels. Complete a variety of manufacturing tasks as trained and directed by your supervisor including but not limited to bonding, potting, hand soldering (surface mount/thru hole & wire bonding), mechanical and electro-mechanical assembly. Notify manager of all Defective Material Reports (DMR). Ability to escalate situations and conditions that are critical to quality, safety and on-time delivery. Education and Experience High School Diploma or Equivalent. 2+ years of related experience. Experience working in a LEAN manufacturing environment a plus. Experience in surface mount and thru hole pcba soldering required. Soldering certification to IPC 610 or willingness to complete certifications. Demonstrated the ability to perform delicate, high skill, processes on small parts. Experience in an ISO 9001:2015 manufacturing environment preferred. Experience with MRP systems a plus. Job Requirements Have good manual dexterity. Computer skills and literacy. Strong attention to detail. Ability to manage multiple priorities and multiple tasks simultaneously. Strong verbal and written communication skills. Produce quality products in accordance with labor and quality standards. Follow all applicable manufacturing procedures and documentation. Follow work order activities established via production planning. Clean and maintain equipment (including tools and fixtures). Participate in the company's LEAN and Continuous Improvement programs. Maintain work area 5s standards. Capable of adhering to J-STD-001 for soldering and inspection for electrical re-work. Join us at Adcole, where innovation meets dedication, and help us continue to set industry standards in metrology equipment. Apply now to be a part of our dynamic and growing team! Job Posted by ApplicantPro

7AM-3:30PM $17.50/hour Works as a member of the production line to assemble headsets and their sub-assemblies and various other parts. SUPERVISORY RESPONSIBILITIES : None. DUTIES/RESPONSIBILITIES: The requirements listed below are representative of the essential duties required. Assemble and test electromechanical components using a variety of tools and/or equipment according to required specifications, processes, and procedures. Conduct quality control checks Escalate assembly issues to production supervisor as needed Perform repair work or rework as needed Clean and maintain work area and equipment, including tools Other duties as required. REQUIRED SKILLS/ABILITIES: Hand dexterity to assemble small components required EDUCATION AND EXPERIENCE: No formal educational credentials are required Experience in a manufacturing setting desired. WORKING CONDITIONS AND PHYSICAL REQUIREMENTS: The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. Physical, Mental & Visual Demands/Efforts Prolonged periods of sitting at workbench Some moving of parts and from station to station and walking through the factory Must be able to lift 25 pounds at times Must be able to perform repetitive assembly tasks Must be able to understand and follow fabrication procedures Visual acuity to inspect products and tools Work Environment and Hazards Some areas in the building are not climate controlled. AMERICANS WITH DISABILITIES ACT David Clark Company complies with all aspects of the Americans with Disabilities Act (ADA) and state disability laws. This means that we will not discriminate against qualified individuals with a disability in any phase of the employment relationship including application for employment, hiring, promotions and/or advancement opportunities, termination, compensation, training and any other conditions or privileges of employment. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice.

What we do matters! CPI Electron Device Business, with a history spanning more than seven decades, is a global leader in design, development, and manufacturing of electronic components and subsystems. We have locations in the United States and Europe. With a heritage of technological excellence, our team serves customers in the radar, defense, industrial, and scientific markets. CPI EDB produces thousands of products that have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, support and protect soldiers, sailors, and pilots, empower scientific discoveries and space exploration, help ensure the safety of imported foods and materials, and much more. We are looking for energetic, agile, highly motivated, and customer focused individuals to join our team and help us to continue to be a market leader, shaping the future in communications and power. YOUR DAY TO DAY: We are seeking a detail-oriented and reliable Assembler I to join our manufacturing team. This role focuses on the precise assembly of sub-assemblies and chassis units, requiring work under a microscope and in a clean room environment. Ideal candidates will have experience with wire and ribbon bonding and a strong commitment to quality. YOU WILL BE ACCOUNTABLE FOR: * Precise assembly of sub-assemblies and chassis units. * Perform other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: * Solder Training, J-STD preferred. * Wire bonding preferred. * Clean Room experience preferred. * U.S. Citizenship and are able to obtain/maintain a U.S. Department of Defense Security Clearance. Salary Range: $17.50 - $23.00 / hour EMPLOYEE BENEFITS: We recognize and appreciate that our employees are our most important asset. We invest in employee wellbeing by offering a wide range of comprehensive benefits to help you achieve your best physical and emotional health for yourself and your family. Employee Health & Wellness Benefits * Medical, vision and dental insurance * Disability insurances * Life insurance and AD&D * Employee assistance programs * Workplace accommodations Financial Benefits * Competitive compensation * Annual performance and salary reviews * Generous retirement savings plans with company match * Paid time off * Paid holidays * Flexible work schedules * Educational reimbursement * Tax savings accounts * Employee referral bonuses * And more! * Please note that while our philosophy is the same in all locations, benefits may vary by office/country WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI EDB, and we respect each employee as an integral member of our growing team. CPI EDB is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI EDB is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

Schulte Staffing is are seeking a detail-oriented and skilled Assembler to join our client's sheet metal fabrication team. This role requires precision, patience, and strong hands-on ability to assemble and inspect sheet metal components. The Assembler will work with a variety of hand tools, measuring instruments, and materials such as honeycomb mesh to ensure products meet strict quality and performance standards. Responsibilities Assemble sheet metal parts and subassemblies according to blueprints, work instructions, and specifications. Use a variety of hand tools, such as wrenches, screwdrivers, and hammers, for precise assembly work. Operate and read micrometers, calipers, and other precision measuring instruments to verify dimensions and tolerances. Perform tedious and detailed hand work with a high degree of accuracy and consistency. Handle and integrate honeycomb mesh and other specialty materials into assemblies. Inspect components for defects, alignment, and compliance with quality standards. Maintain a clean, safe, and organized work environment. Follow all safety procedures and adhere to company policies. Qualifications Previous experience in a manufacturing, sheet metal, or assembly environment preferred. Ability to use and interpret measuring tools (micrometers, calipers, etc.) accurately. Strong hand-eye coordination and attention to detail. Ability to perform repetitive, precise tasks with accuracy. Comfortable working with small components and detailed assembly tasks. Strong problem-solving skills and commitment to quality. High school diploma or equivalent required; technical training is a plus. Physical Requirements Ability to stand, bend, and work with hands for extended periods. Lift and carry materials up to 25 lbs as needed. Perform fine motor tasks with precision and steadiness. You should be proficient in: Shop Math Skills Blueprint Reading Machines & technologies you'll use: EDM Machine (Wire) CNC Laser Cutter EDM Drilling Machine Calipers and Micrometers Salary info: $20 - $22 / hr

Wall Industries, a subsidiary of Continental Resources, Inc., is located in Exeter, NH. The company manufactures and markets a full line of DC/DC converters and AC/DC power supplies with an emphasis on modified standard and customized power solutions to a worldwide market. We are currently looking for an Assembler to join our team. Essential Duties and Responsibilities: * Performs visual inspection of printed circuit board assemblies and sub assemblies to ANSI/IPC 610 B soldering workmanship standards * Works with Engineering documents, visual aids, inspection instructions and checklists * Records and reports defects * Re-inspects reworked units * Identifies non-reworkable issues to the supervisor * Routes non-conforming material to the Material Review Board (MRB) * Applies use of Electro Static Discharge (ESD) precautions when handling products * Works independently in the Engineering Department with Engineers #ConRes # of Hires Needed 1 Exemption Type Non-Exempt Hiring Manager Job Requirements Qualifications or equivalent: High School Diploma or equivalent Minimum of 5 years in a Soldering/Rework position IPC Solderer Certification Ability to build electrical boards using engineering drawings Rework Certification Ability to identify solder defects for through hole and surface mount components Ability to distinguish the difference between rework and repair requirements Ability and willingness to train, learn and perform other duties as required Familiar with: * ANSI/IPC 610B workmanship standards * Electro Static Discharge (ESD) requirements * Ability to Read Engineering Bill of Material and other Engineering documents

reference job description. All Job Posting Locations (Location) Woburn Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Please note this a position for 2nd shift (5:00 PM - 3:00 AM) Monday - Thursday offering an additional a 12% shift pay differential. About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: The Assembler is responsible for assembling precision-machined components, ensuring they meet specifications and quality standards. This includes using hand and pneumatic tools, as well as precision measuring instruments, to assemble, test, and finish parts. The role requires interpreting engineering drawings, performing quality inspections, and maintaining efficient workflow on the shop floor. Location: Malden, MA Responsibilities: Assembly Operations: Perform all tasks required to assemble precision components, including layout, fabrication, fitting, and testing of parts. Ensure parts meet design specifications and quality standards. Quality Control: Conduct visual and dimensional inspections using measuring tools such as calipers, micrometers, and scales to verify part conformance. Identify and resolve any quality issues during the assembly process. Tool & Equipment Usage: Utilize hand and pneumatic tools with a high degree of dexterity to assemble, fit, and finish parts. Ensure tools and equipment are maintained in good working condition. Blueprint Interpretation: Read and interpret technical drawings, sketches, blueprints, and specifications to guide the assembly process. Make adjustments to assemblies based on detailed instructions. Collaboration: Work closely with team members and supervisors to meet production schedules and resolve any assembly-related issues. Communicate effectively regarding assembly progress and any concerns that may affect timelines or quality. Continuous Improvement: Identify opportunities for improving assembly processes, contributing to efficiency and reducing waste or defects. Suggest improvements to tools, techniques, or workflows to enhance productivity. Safety and Compliance: Follow all safety procedures and protocols while operating machinery and tools. Ensure adherence to company policies, safety standards, and best practices in all aspects of the role. Required Qualifications: Minimum of 3 years of experience in mechanical assembly, with a strong emphasis on aerospace manufacturing, fabrication, and assembly processes. St least two years as a mechanical or manufacturing assembler required. Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations At least 2 years of hands-on experience demonstrating manual dexterity and proficient use of hand and pneumatic tools. 3+ years of experience operating precision measuring instruments, including but not limited to scales, micrometers, and calipers. Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: Attention to Detail: Ability to focus on small details and ensure high accuracy in all assembly tasks, minimizing errors and rework. Adaptability: Willingness to learn new assembly techniques, tools, or technologies as needed to meet evolving production requirements. Teamwork & Collaboration: Ability to work well within a team, supporting colleagues and contributing to a positive work environment. Time Management: Strong ability to prioritize tasks, manage time effectively, and meet deadlines without compromising quality. Quality Focus: Demonstrated commitment to maintaining high-quality standards and ensuring compliance with all regulatory requirements, especially in aerospace. Pre-Employment Screening: As a federal contractor in the defense industry, Pursuit Aerospace is subject to federal regulations. All offers of employment are contingent upon successful completion of background checks, drug and alcohol screening, and employment eligibility verification. Physical Requirements: Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to frequently sit, stand and walk. Must be able to lift and carry up to 15 pounds. Compensation & Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Pursuit is an Equal Opportunity Employer.

The Panther Group is currently seeking an Assembler for a contract to hire opportunity with a respected manufacturing company. This role is ideal for someone who enjoys hands-on work, pays close attention to detail, and has experience in small parts assembly. You will be working as a member of a production line to assemble headsets and their sub-assemblies and various other parts. Key Responsibilities: Assemble and test electromechanical components using a variety of tools and/or equipment according to required specifications, processes, and procedures. Conduct quality control checks. Escalate assembly issues to the production supervisor as needed. Perform repair work or rework as needed. Clean and maintain work area and equipment, including tools. Other duties as required. Requirements: No formal education credentials are required. 0-1 years of experience in a manufacturing setting. Hand dexterity to assemble small components required. Detail-oriented and consistent. Works well as a productive member of a team. Ability to troubleshoot and make necessary repairs. Position does not require any previous experience working with office software. This is a great opportunity with a reputable company to gain valuable experience in a hands-on manufacturing environment. Pay $17.50 per hour #INDSUCC

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Confidential At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. *Starting Wage: $19.85* What You Will Do Replenishes chemicals, solvents, compounds, process fluids as required including dispensing into secondary containers and chemical cleaning. Operates and checks malfunctioning machinery/equipment and makes routine in-process adjustments, minor repairs, and replacement of worn parts Works to specifications, instruction sheets, prints, and written/verbal, video, and computer instructions to fabricate/assemble/inspect product manually, semi-automatically or automatically. Performs routine operations on production assemblies, harness and cables, substrates, fixtures, templates and holding devices. Prepares molds, loads and unloads units, mixes compounds and performs necessary products samples verification, and reworks/repairs product as required. Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of component and assemblies including all finishing processes. Sets up and winds coil, assembles, and processes various types of magnetic electrical components. Assembles checks, test and adjusts inertial/gyros/accelerometers/optical instruments. Maintains cleanliness/production supplies for work area station including equipment. Provides routine equipment and workstation maintenance including necessary logs. Advances or retrieves product, material and tools for self and others. Operates multiple pieces of equipment simultaneously. Uses prescribed equipment to perform stenciling marking coding and potting operations as required. Performs routine visual, automatic and dimensional inspections and continuity measurements on a variety of products. Performs necessary operations to fabricate fixtures/holding devices as required for harness/cable processes. Performs drilling, grinding, sandblasting, staking, riveting, eye-letting, countersinking and counterboring operations, and other related mechanical processes. Incorporates engineering change orders and maintains process documentation. Performs general maintenance and housekeeping of workplace, tools and equipment. Maintains records, moves materials and follows safety rules in performance of duties. Performs other similar duties as required or directed. Qualifications You Must Have High School Diploma or Equivalency (GED). The ability to obtain and maintain a U.S. secret clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance. Post-Offer Testing Requirement: You will be required to take post-offer qualifying tests to determine whether you meet the qualifications for this position. Qualifications We Prefer Soldering experience. Works well with others. Has a track record of being reliable and dependable. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position is part of a collective bargaining agreement. Wage and work place conditions, including shift times, are subject to this agreement. Individuals hired into this position will be represented by a union. Clearance Information: This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Confidential At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. * Starting Wage: $19.85* What You Will Do * Replenishes chemicals, solvents, compounds, process fluids as required including dispensing into secondary containers and chemical cleaning. * Operates and checks malfunctioning machinery/equipment and makes routine in-process adjustments, minor repairs, and replacement of worn parts * Works to specifications, instruction sheets, prints, and written/verbal, video, and computer instructions to fabricate/assemble/inspect product manually, semi-automatically or automatically. * Performs routine operations on production assemblies, harness and cables, substrates, fixtures, templates and holding devices. * Prepares molds, loads and unloads units, mixes compounds and performs necessary products samples verification, and reworks/repairs product as required. * Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of component and assemblies including all finishing processes. * Sets up and winds coil, assembles, and processes various types of magnetic electrical components. * Assembles checks, test and adjusts inertial/gyros/accelerometers/optical instruments. * Maintains cleanliness/production supplies for work area station including equipment. * Provides routine equipment and workstation maintenance including necessary logs. * Advances or retrieves product, material and tools for self and others. * Operates multiple pieces of equipment simultaneously. * Uses prescribed equipment to perform stenciling marking coding and potting operations as required. * Performs routine visual, automatic and dimensional inspections and continuity measurements on a variety of products. * Performs necessary operations to fabricate fixtures/holding devices as required for harness/cable processes. * Performs drilling, grinding, sandblasting, staking, riveting, eye-letting, countersinking and counterboring operations, and other related mechanical processes. * Incorporates engineering change orders and maintains process documentation. * Performs general maintenance and housekeeping of workplace, tools and equipment. * Maintains records, moves materials and follows safety rules in performance of duties. * Performs other similar duties as required or directed. Qualifications You Must Have * High School Diploma or Equivalency (GED). * The ability to obtain and maintain a U.S. secret clearance prior to the start date. U.S. citizenship is required as only U.S. citizens are eligible for a security clearance. * Post-Offer Testing Requirement: You will be required to take post-offer qualifying tests to determine whether you meet the qualifications for this position. Qualifications We Prefer * Soldering experience. * Works well with others. * Has a track record of being reliable and dependable. What We Offer * Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Learn More & Apply Now! * Please consider the following role type definition as you apply for this role. * Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. This position is part of a collective bargaining agreement. Wage and work place conditions, including shift times, are subject to this agreement. Individuals hired into this position will be represented by a union. Clearance Information: This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: ************************************************ As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description Job Summury: As an Assembler, you will be responsible for assembling products and components according to detailed specifications and quality standards. Your duties will include reading engineering drawings , using hand and power tools to complete assembly tasks. Duties & Responsibilities: Assemble products per routings, engineering drawings, and specifications Identify and report defective materials or faulty equipment to the supervisor Work collaboratively with team members and support departments to resolve production issues Maintain a clean and safe working environment Follow all company policies, safety policies, and quality guidelines Perform additional tasks as assigned. ** Skills & Qualifications** High school diploma or GED required Basic mechanical aptitude and ability to use hand and power tools Prior manufacturing or assembly experience preferred Ability to follow written and verbal instructions Basic math, measuring, and mechanical skills Ability to read and interpret assembly technical drawings Ability to work overtime as needed Working Conditions: The worker is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature changes. The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. The worker is subject to vibration: Exposure to oscillating movements of the extremities or whole body. The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. • * *Double E provides equal employment opportunities to all applicants and employees and strictly prohibits any type of harassment or discrimination in regards to race, religion, age, color, sex, disability status, national origin, genetics, sexual orientation, protected veteran status, gender expression, gender identity, or any other characteristic protected under federal, state, and/or local laws. • *Consistent with the Americans with Disabilities Act (ADA), it is the policy of Double E to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact ************. • *Your employment with Double E is on an at-will basis, meaning either you or the Company can terminate the employment relationship, at any time, for any or no reason, and with or without cause or notice. As an at-will employee, your employment with Double E is not guaranteed for any length of time. • I understand the description of this job and the essential functions, as given above. I also understand that not all of the duties are described above, and that I will perform those above and other related duties as directed by my supervisor and management. I further understand that employment is at-will, and that either I or my employer may terminate the employment relationship at any time. You should be proficient in: Mechanical Troubleshooting Skills Tape Measure Reading Mechanical Assembly Skills High School / GED Shop Math Skills Blueprint Reading

DUTIES AND RESPONSIBILITIES: Read, interpret, and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products. Utilize a variety of hand & power tools, fixtures, work instructions and test equipment to perform a series of operations to correctly assemble product. Performing soldering of wires, SMT, TH parts. Maintain inventory of products at workstations. Perform quality work checks to ensure the product meets quality standards. Identify product defects and complete appropriate documentation when defects are identified. Rework and/or repair assembled equipment and products according to engineering specification changes. Perform all work in accordance with quality standards and established safety procedures. Maintain a clean and safe work area. Must follow all company policies, procedures, and protocols. Any other duties assigned as needed. SKILLS AND KNOWLEDGE: Must possess good interpersonal skills. Specific technical or vocational training or certification is a plus. Basic computer navigation and utilization skills. High attention to detail and self-motivation skills. Good communications skills, both written and oral. Ability to apply concepts of basic math. Ability to manage time between two or more projects at one time. Ability to read and comprehend instructions and procedures. The ability to apply knowledge and skills to achieve intended results. MINIMUM QUALIFICATIONS: High school diploma or equivalent. 1-2 years electro-mechanical assembly experience may be required. Valid driver's license. Must have a satisfactory motor vehicle report (MVR). Satisfactory background check. The physical ability to immediately respond to emergency situations.

Connexion's mission is to provide "best in class" services to job seekers. We strive to achieve excellence in job placement, staffing, and recruiting services, while treating candidates with the professionalism and respect they deserve. Title: E/M Assembler Hiring Organization: Connexion Systems & Engineering Compensation, Benefits, and Employment Type Duration: Temp to Perm Pay Rate: $18-$20/hr. Job Location: Worcester, MA Schedule: Mon-Fri 7am-3:30pm Job#: 18027 Onsite Soldering Test: Hand soldering---using a handheld soldering iron, understanding the purposes of the chemicals involved (flux, flux thinner, alcohol), using lead-free solder wire, stripping and tinning small gauge wire. Candidate will be given two different simple assemblies to complete, and will be evaluated on the following criteria: Knowledge and ability in soldering Ability to read and understand simple fabrication procedure documents. Ability to solder in a fast-paced production environment. The assessment is timed to 30 minutes (A typical, experienced solderer can complete the assessment in 5 minutes or less) JOB SUMMARY: An Electromechanical Assembler works as a member of the production line to solder and assemble various electromechanical parts. DUTIES/RESPONSIBILITIES: The requirements listed below are representative of the essential duties required: Mount, connect, assemble and secure parts and components of electronic equipment utilizing hand-soldering techniques. Assemble and test electromechanical components using a variety of tools and/or equipment according to required specifications, processes, and procedures. Conduct quality control checks. Escalate assemble issues to the production supervisor as needed. Perform repair work or rework as needed. Clean and maintain work area and equipment, including tools. Other duties as required. LEVEL OF RESPONSIBILITY: Employees work under general supervision. Employees have little or no decision-making responsibility. The employee has little or no impact on the decisions of others. REQUIRED SKILLS/ABILITIES: Ability to hand solder required and must pass the internal certification process. Dexterity to assemble small components required. Position does not require any previous experience working with office software. EDUCATION AND EXPERIENCE: No formal educational credentials are required. Zero-1 year of experience in a manufacturing setting is helpful. Soldering experience or training preferred. Specialized training or certification required. WORKING CONDITIONS AND PHYSICAL REQUIREMENTS: The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. Physical Demands/Efforts Prolonged periods of sitting at a workbench. Some moving of parts and from station to station and walking through the factory. Occasional physical exertion includes some lifting of objects weighing up to 25 pounds. Must be able to perform repetitive soldering and assembly tasks. Mental & Visual Demands/Efforts Considerable mental concentration to effectively execute complex tasks. Must be able to understand and follow fabrication procedures and wiring diagrams. Work requires frequent visual effort for extended periods of time. Visual acuity to inspect products and tools. Work Environment and Hazards Some areas in the building are not climate controlled. Some exposure to heat, dust, or other factors of minor inconvenience. Some exposure to hazards that might cause minor injury. Please use the apply button to submit your resume for consideration. A Connexion Representative will contact you shortly. You may also send your resume and cover letter via email to the recruiter listed below. You MUST include the Job# and Job Title in your subject line. If you are active in a job search but this job is not for you, please reach out to *************************. We would be glad to help you find the perfect job!

We are looking for a skilled Assembler to connect parts into more complex components. You will ensure all parts fit correctly and are suitable for the final product. You will use your hands or machines to do the job with greater precision. You must have good technical knowledge and possess great manual dexterity. Ability to read instructions represented in manuals, drawings, schematics etc. and follow them with precision is extremely important. The goal is to produce complex outputs by putting together smaller components. Responsibilities Read and comprehend instructions and follow established procedures Collect all material and equipment needed to begin the process Take precision measurements to ensure the perfect fit of components Select or modify components according to measurements and specifications Align material and put together parts to build more complex units Check output to ensure the highest quality Maintain equipment in good condition Keep records of production quantities and time Report on issues, malfunction or defective parts Requirements Proven experience as an assembler Technical knowledge and ability to read blueprints, drawings etc. Ability in using tools (e.g. clamps) and machines (e.g. presses) Good understanding of quality control principles Good communication skills (verbal and written) Excellent hand-eye coordination and physical condition High school diploma; Higher degree from a technical school will be appreciated

Full-time Description Since 1904, Nelson Miller Group (NMG) has been a leading global provider of custom solutions, partnering with organizations across industrial, IoT, lighting, medical, telecommunications, consumer, and aerospace and defense sectors. We bring complex products to life by solving intricate challenges in engineering design, manufacturing, and supply chain management. Our expertise spans Human-Machine Interface (HMI) solutions, value-added distribution, plastics, membrane switches, overlays, touch panels, electronics, metals, and cables. Our century-long legacy is built on a deep commitment to innovation, operational excellence, and unwavering customer satisfaction. These principles drive everything we do as we continue to grow and expand our global market presence. Description Under the direction of the Production Supervisor and/or Production Group Leader perform assembly tasks as assigned, efficiently and accurately and in a timely manner Duties and Responsibilities: Arrive at work on time and follow all time in/time out policies of the company. Perform all assigned jobs per work order instructions. Notify supervision if work instructions are not available, accurate or complete. Keep work area/shop organized and picked up as required. Complete all required time sheets and work orders each day. Notify management when problems occur with equipment Responsible for knowledge and adherence to all ERP procedures as regards production assembly. Responsible for knowledge and adherence to, and promotion of quality policies, procedures and work instructions. Responsible for adherence to and promotion of maximum safety standard, ensuring personal and fellow employees' safety by adhering to company safety rules and procedures. Responsible for adherence to applicable ITAR regulations. Perform other duties as may be required by supervisor. Requirements Education: High School Diploma or equivalent. Experience: Previous assembly experience in a manufacturing environment is preferred. Skills: Strong attention to detail and manual dexterity. Basic math skills. Ability to read, write, and speak English clearly. Ability to follow detailed instructions and work independently. Familiarity with ERP systems is a plus. Work Ethic: Punctual, reliable, and committed to maintaining high standards of quality and safety. Additional Requirements Due to ITAR and / or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C.1324b(a)(3). Candidates being considered for hire must pass a pre-employment background check. Compensation and Benefits: Pay Range: $18.25 - $20.00 per hour (Pay to be determined by the experience, knowledge, skills, and abilities of the candidate, and alignment with market data). Benefits Offered: Comprehensive benefit package including medical, dental and vision coverage; company-paid basic life/AD&D insurance, voluntary supplemental insurances, etc. Sick Leave, Vacation Time, and company-paid Holidays are provided as paid time off. New England Keyboard also provides a 401(k) Retirement Savings Plan option with a safe harbor non-elective company contribution. New England Keyboard/Nelson Miller Group is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law.