Assembler jobs in Mahwah, NJ - 79 jobs

**Candidates without soldering skills will not be considered! * Assembles and/or wires moderately complex equipment following blueprints, models, and model prints. Skilled adjusting, fitting, and aligning are required;tolerances are close. * Has ability to follow work cell procedures. * Sets up and operates one or more production type machines such as component trim machines, Amp machines, and riveting machine. * Is flexible and can perform many operations on product in and outside of home department. * Solders to best commercial specifications. * Uses hand and power tools as required. * Builds harness assemblies. * Use work order package and utilize on-line bar code reporting system for labor and manufacturing quantities * Performs related duties as assigned by Supervisor. * Works overtime as required. * Strives to meet prescribed quality standards in an ISO environment. SKILLS AND EXPERIENCE REQUIRED: * Minimum of 1 year electronic assembly experience. * Ability to identify components and color codes. * Excellent soldering skills. * Must be able to communicate and understand directions in English.

So why join Hologic? You will have the opportunity to get in on the ground floor at a high growth facility to create a manufacturing process working on life-saving medical devices with potential for future growth. This is a great opportunity to enhance you manufacturing operation skills and knowledge to further your career. What to expect: Electro/Mechanical Assemblers perform a wide variety of electronic, electro-mechanical, mechanical or measurement product assembly operations on product components, assemblies, or sub-assemblies. Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering, cable harnessing, welding, and fitting on assembly units. Executes production operations as well as performing rework and quality testing related to the production of parts, components, subassemblies, and final assemblies. Responsible for following all operating procedures to the highest standard. What we expect: E/M Assemblers to work collaboratively with manufacturing associates, engineering, quality, and leadership to execute production requirements. Supports engineering experimentation and operational improvement initiatives as requested. Participates in teams to identify opportunities for improvement within production area. May assist in developing methods and procedures to control or modify the manufacturing process. Skillset: Proficient working understanding of Microsoft Office platform including Excel, Word, SharePoint, and OneDrive required. Ability to read, understand, and follow all written procedures. Ability to communicate effectively, both written and verbally. Ability to work both independently and as a member of a team. High-level of attention to detail and focus on quality. Detail oriented and accurate. Must be able to read, write, and understand English. Trained to execute 3-4 roles within the Operations team. Certified as a Subject Matter Expert for 1+ roles within the Operations team IPC 610 / 620 Certification. Experience with Oracle ERP system. Experience with Agile Product Lifecycle Management system. Knowledge of Electrostatic Discharge (ESD) handling best practices. Education & Experience Minimum of High School diploma/General Education Degree (GED) or Associate Degree 0-1 years of experience in Manufacturing The annualized base salary range for this hourly role is $39,100-$58,600 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency and Third Party Recruiter Notice: Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview Primary focus is to build product by following processes to meet production goals. Job Responsibilities and Essential Duties * Understands and adheres to safety policies and practices. * Responsible for quality and adheres to manufacturing process requirements and the Getinge Corporation Quality Policy. * Builds product by following all processes in which trained (in their most current revision), and completing other assigned work, while meeting manufacturing goals and metrics. * Demonstrates a basic understanding of Lean Manufacturing and related principles * Maintains accurate records, including training files and shop floor paperwork (SFP). * Willing to participate in Shared Leadership tasks and responsibilities as directed. * Understands and follows all Getinge and site-specific policies and procedures. * Responsible for attending and passing all required Getinge and site-specific training (i.e., QS Basics, Lean Training). * Demonstrate an understanding of the basic functions of SAP, if applicable. * Responsible for maintaining individual training records. * This is not an inclusive list of job responsibilities. Minimum Requirements * High School diploma (equivalent) or 5 years of work experience. * Minimum experience is 0-12 months in a medical device-manufacturing environment. Required Knowledge, Skills and Abilities * Demonstrated ability to follow processes and has a moderate understanding of the technical job duties. * Able to use and understand Basic English communication both written and spoken; demonstrate basic reading, writing and math skills. * Must demonstrate ability to work effectively in a team setting, be flexible, and exhibit a willingness to learn/ take on new tasks. The compensation range for this position is between $18.50 - $19.00 per hour depending on experience and location #LI-MV1 About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: * Health, Dental, and Vision insurance benefits * 401k plan with company match * Paid Time Off * Wellness initiative & Health Assistance Resources * Life Insurance * Short and Long Term Disability Benefits * Health and Dependent Care Flexible Spending Accounts Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law. Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Job Description Electro-Mechanical Assembler 1st Shift Mon-Fri 7 am-3:30 pm (OT - 6 am - 3:30 pm) Effective w/e 11/25/2023, all new starts for Boonton will have a 30% increase to their base pay to cover the client\'s compensation package. Please inform the contractor that they will lose their 30% increase at conversion but will gain their benefits, including PTO and Holiday pay. This is due to the new law passed in NJ. Position Summary: Responsible for complex and diversified assembly of a variety of products in which mechanical drawings or work instructions are provided. Intricate fitting, adjusting, and aligning of a considerable number of parts (involving close tolerances and interrelated factors) are required to complete products, units, or sub-assemblies. Hand tools and usage of machines will be required to perform the assembly. Follows schedule provided by SAP and management. Position Responsibilities: Assembles and/or wires complex equipment following blueprints, models, and model prints. Skilled adjusting, fitting, and aligning are required within close tolerances. Follows work cell procedures or mechanical drawings and product structures. Sets up, operates, and maintains basic production machines such as component engravers, presses, crimpers, riveting or encapsulation machines. Is flexible and able to perform many operations on product in and outside of home department. Uses hand and power tools as required. Builds harness assemblies. Light usage of computers to monitor and report job status and component availability. Will need to be able to open prints or work instructions from system and write to excel or SAP databases. May perform thru-hole PCB assembly. Performs related duties as assigned by Supervisor. Works overtime as required. Strives to meet prescribed quality standards in an ISO environment. Follows proper use of PPEs to promote a safe work environment and performs 5S steps to ensure clean, hazard-free, and efficient work area. Skills and Experience Required: Minimum of 1-3 years electro-mechanical assembly experience. Mechanical assembly with electronic/electrical safety knowledge is acceptable. Ability to read blueprints and schematics; read and identify proper components and color schemes. Must present excellent workmanship standards. Must have good verbal communication skills.

Manufacturing Assembly in Fairfield, NJ Pay: $17/hr. Schedule: Mon-Fri 6am-2:30pm Benefits, and Weekly Pay iBoost Talent is hiring for an Assembly / Manufacturing Associate located in Fairfield, NJ. Our positions are full-time, year-around employment with paid training. Pay $17.00 per hour Schedule 1st Shift; Mon-Fri 6am-2:30pm with occasional overtime Position Overview: This position is responsible for performing light assembly, machining, or packaging of manufactured products while maintaining the specified the quality, efficiency, and inventory control requirements. Work assignments will be scheduled based on training proficiency. depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Typical assembly work is repetitive in nature. Steel-toed shoes are required for working in this position. Regular production/warehouse environment (no air conditioning). Key responsibilities include: Understanding and executing verbal instructions related to your duties. Inspecting work to ensure quality and accuracy. Transporting completed products to designated locations using proper material handling methods. Monitoring and replenishing raw materials as needed for operations. Completing all required documentation and electronic data updates. Preparing and packaging units for shipment. Assisting with various duties across departments as necessary. Maintaining a clean workstation in accordance with 5S procedures. Achieving or exceeding pre-established performance objectives. Upholding our core values: Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment, and Continuous Improvement. Identifying and reporting workplace hazards while participating in safety programs and initiatives. Job Requirements: Fluency in reading, writing, and speaking English. Basic mechanical, math, and problem-solving skills. Proficiency in operating equipment such as basic machining posts, saws, paint sprayers, and hoists. Ability to read and interpret assembly drawings, blueprints, BOMs, and associated procedures. Competence in using measurement tools like tape measures, micrometers, and calipers. Familiarity with basic hand tools (hand drills, screwdrivers, hammers, etc.). Flexibility to adapt to changing priorities and tasks. Strong teamwork skills and the ability to follow directions. Proven reliability in attendance and punctuality. Understanding of basic lean principles (5S, Kanban). Preferred Qualifications: High School diploma or GED. Previous manufacturing experience is a plus. Working Conditions/Physical Demands: This position requires standing for 8 hours a day, with coordinated hand and finger movements for grasping, manipulating, and assembling objects. You will frequently use vibrating/pneumatic tools and may need to reach overhead, bend, twist, stoop, kneel, or squat. The role involves lifting and carrying up to 40 lbs regularly. Depending on the tasks assigned for the day, you may have to sit or stand more or less frequently. Typical assembly work is repetitive in nature. Steel-toed shoes are required for working in this position. Regular production/warehouse environment (no air conditioning). Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. iBoost Talent is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. EOE Thank you for your interest in iBoost Talent, we are proud to be an Equal Employment Opportunity Employer and participate in the E-Verify eligibility confirmation program.

Department: Production Reports To: Department Manager Physical Demand Level: Medium to Heavy FLSA Status (US only): Non-Exempt The Assembler will primarily support operations that will include, but not limited to, fabricating, packing, repair and maintenance of component parts and products. Maintain a clean work area and follow detailed instructions to meet safety and quality requirements. SUPERVISORY RESPONSIBILITIES: This role does not have supervisory responsibilities. ESSENTIAL DUTIES & KEY RESPONSIBILITIES: Read and interpret blueprints and work orders. Verify quality of parts and materials used in production. Ensures accuracy, completeness, and condition of parts. Keep a clean and well-maintained work area. Other responsibilities as assigned. SKILLS & COMPETENCIES: Excellent communication skills and ability to understand job instructions both verbally and written. Attention to detail. Read, write, and speak fluent English. Work well under pressure. Ability to multi-task. Ability to lift 25 lbs. EDUCATION & EXPERIENCE High School Diploma or equivalent PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand and hear. The employee is frequently required to walk; reach with hands/arms; lift and/or lower; push and/or pull; and use hands to finger, handle, feel and/or finely manipulate objects. The employee must frequently lift/move and/or push/pull up to 20 lbs. and occasionally lift/move and/or push/pull up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Use of vision correction is acceptable, if necessary; however, any vision correction apparatus must meet all safety guidelines for the area of activity. Benefits: Medical Dental Vision Short Term Disability Long Term Disability PTO Paid Holidays Paid Sick Days 401K / 401K Company Match Life Insurance Paid Jury Duty Employee Referral Program Tuition Reimbursement Program based on job. Employee Assistance Program Salary Range: $16.00 - $20.00/Hour based on experience EEOC Statement: MW Components, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Visit us at ******************** for more information about MW Components, Inc. and our affiliate companies.

Electronic Assembler About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world's aircraft, Safe Flight counts among its customers the majority of the world's aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight's benefits: Include employer-funded health care, life insurance, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: In the office- Monday through Friday 7:45 am to 4:15 p.m. Hourly Rate: $20-22 salary commensurate with experience. Duties/Responsibilities: Perform assembly tasks according to established procedures and engineering drawings. Utilize small hand tools, such as soldering irons, wire strippers, crimpers, etc., to assemble components accurately. Perform assembly tasks according to established procedures and engineering drawings. Utilize small hand tools, such as soldering irons, wire strippers, crimpers, etc., to assemble components accurately. Create wire harnesses by routing and securing wires, cables, and connectors following specific guidelines and wiring diagrams. Skillfully strip wire insulation to the required length while maintaining precision and quality standards. Use appropriate crimping tools to secure connectors, terminals, and contacts onto wires, ensuring reliable electrical connections. Assemble electronic components onto printed circuit boards (PCBs) using industry-standard techniques and following assembly instructions. Demonstrate excellent soldering skills by accurately soldering components onto PCBs, wires, or other electronic parts. Ensure solder joints are of high quality and meet the required specifications. Performs other related duties as assigned. Required Skills/Abilities: Proficient in reading and interpreting engineering drawings, wiring diagrams, and assembly instructions. Demonstrates fine eye/hand coordination and meticulous attention to detail, ensuring precision and accuracy in assembly tasks. Strong commitment to producing high-quality workmanship and adherence to quality specifications. Experience with surface-mount printed circuit boards (PCBs) a plus Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: An individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: An Assembler is an individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards Assembles components in accordance with drawings and operation sheets. Responsible for weighing, loading and pressing operations. Handle tooling and fixtures / use various hand tools to produce or modify parts. Maintains count and order progress and logs in time / quantities. Closes and assembles units (use of crimping and closure tools and epoxy applications). Soldering tasks, i.e. small wire soldering, terminal soldering, bridge wire welding. Assists with the packaging of pyrotechnic assemblies where required. Follows required company safety practices and quality procedures. Follows procedures as defined by CAD policies, procedures and ISO9001 requirements. Maintains confidentiality of all information processed. Perform other related duties as assigned. PHYSICAL DEMANDS: While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Works in a temperature controlled environment. The noise level in the environment is usually low to moderate. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

ANTA Electric, Inc. is a rapidly growing electronics contract manufacturer located in Dover, NJ. We are a woman owned company that offers design, engineering, and full turnkey services, which we are proud to produce 100% in the United States. We are seeking a few Assemblers for a full time permanent positions - no assembly experience necessary - we are looking for mechanically inclined people. Essential Duties and Responsibilities: Performs basic production activities associated with the production of Wiring Harnesses, Electromechanical Panel Builds, Assemblies. (Entry-Level) Cut wire to drawing dimensions. Apply labeling to assemblies. Apply shrink tubing to assemblies. Perform “tinning” operations on stripped wire as required by the drawing. Perform basic mechanical assembly operations using various hand tools. Perform other basic tasks as assigned by the Production Supervisor Education and/or Work Experience Requirements: No prior work experience required; you must like working with your hands - being good at taking things apart & putting back together. Being mechanically inclined is required. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Schedule: 8 hour shift - 8am - 4:30 pm - Monday to Friday Ability to commute/relocate: Dover, NJ: Reliably commute or planning to relocate before starting work (Required) Experience: Assembly: 1 year (Preferred)

MAURY MICROWAVE JOB DESCRIPTION Job Title: Electrical Assembler FLSA Status: Non-Exempt Department: Manufacturing Reports to (Title): Production Manager The Electrical Assembler is responsible for safe, accurate, and efficient assembly of electrical parts using a variety of tools and equipment to build high precision test equipment according to required specifications, processes, and procedures. Fine motor skills and high-quality standards will be required to ensure efficient and accurate assembly, suitable for a high quality, high value final product. Essential Functions of the Position Soldering under a microscope Ability to work with through hole and surface mount components Ability to work with 0603 components Gap welding and wire bonding experience Experience with assembly of microwave components Ability to follow PCB layout and read electronic schematics Ability to be an independent worker and to be part of a team Requirements (education, prior work experience, special skills, etc.) 1-2 years of prior work experience in a manufacturing environment Job Qualifications and Training: High School Diploma Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance. Group 401(k) plan with company matching contributions. Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally Employee Training Required: Check all appropriate: _x_Safety _x_Company Policies _x_Quality System ___ERP

Job Description Schedule 6-4:30 PM Knowledge of basic tools. Basic solder skills. On the job training.

Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers last year. We are the trusted provider to the world's largest brands like Walmart, Amazon, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” for 2022 all due to our hardworking technicians who have pride in all they do! We are also the fastest growing, with over 100 new management roles created and filled last year! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new treadmill or desk or mount their new TV. You have an entrepreneurial spirit and like the benefits and backing of a W2 organization. You enjoy independence and are self-motivated. You are a great communicator and enjoy interacting with customers. Customer satisfaction and high quality is your top goal when working. You're a problem-solver and proactively seek solutions. You are reliable and have a proven attendance record. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI team! Key Responsibilities Bed Warranty Repairs - Troubleshoot and fix mechanical or structural issues on various bed types Furniture Assembly - Assemble bed frames, desks, chairs, shelving units, and more Fixture Mounting & Installation - Install wall fixtures such as painting, mirrors, and other home fixtures securely TV Mounting & Installation - Mount, install, and setup TVs, ensuring secure placement and optimal viewing angles Entertainment System Installation & Setup - Install and configure home theater systems, soundbars, and streaming devices Provide top-tier customer service, educating customers on product use and maintenance Maintain accurate records of installations and repairs using company software Follow all safety and quality control procedures to ensure professional results What We're Looking For Experience in installation, assembly, or repair work (preferred but not required) Familiarity with entertainment and security system setup is a plus Mechanical aptitude and ability to use hand/power tools Strong attention to detail and problem-solving skills Excellent customer service and communication abilities Ability to lift and move heavy equipment (50+ lbs) Valid driver's license and clean driving record Benefits: Weekly Pay Medical/Dental/Vision Insurance 401K Paid Certification Program W-2 Employee The Fine Print NAI pays our “in-home” techs competitive earnings per piece being paid for every completed project. Our focus is on efficiency, quality, and safety above all else! Your will and your skill will enable you to determine the pay you desire for yourself. Our dedicated team will give you all the tools and training necessary to unlock your maximum potential. Full and part-time work is available, and jobs and schedules will vary depending on location. You will be a W2 employee (not a subcontractor!), meaning you will be trained, insured, paid appropriately for all hours, including overtime, and eligible for benefits. Start a Career that you Love with National Assemblers, Inc. APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

We are the manufacturer of the IMPACT AIR 45 Highspeed Handpiece. Our Handpiece is specifically engineered for surgical procedures handcrafted in the U.S. for nearly 40 years. We are an Englewood based company is ISO Certified and manufactures CE Marked products. Our products are available across the U.S., Canada, & Europe and are currently licensed in Australia & Korea. Job Description Experienced assembler to work in the manufacturing department with ability to handle very small parts in the production of a medical device. Reading and writing English is a must - ability to follow batch records and procedures; attention to detail and accuracy is required. Qualifications 2 to 3 years manufacturing / assembly experience required - High School diploma, reading and writing English is a must - attention to detail is essential - Additional Information Clean work in a pleasant environment - work hours are 7:45 am to 4:00 pm Monday to Friday. Health, Dental and Life Insurance Benefits after 90 days - 401K available after 1 year - Vacation and sick-time also available. Rate of pay per hour $11.50 to $12.50 depending on experience and qualifications.

Aid in the production process and mould different fixtures. Utilize various hand and power instruments to complete tasks (measuring tape, hammer, etc.) Analyze completed products and inspect them for quality. Put together old units and, if necessary, carry out modifications and repairs. Produce precise drawings of product designs Reading and understanding product schematics and assembly instructions. Verifying dimensions and product specifications. Ensuring that all parts are properly fitted, aligned and screwed in. Reporting and detailing product malfunctions. Adhering to assembly safety standards.

Assemble or fabricate lighting parts, pieces or products using a variety of tools and equipment according to required specifications in a production line in a manufacturing organization. Essential duties and responsibilities Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products Utilize hand held tools such as a hand held screw and drill gun Maintain inventory of product in work stations Perform quality work checks as well as measurements with a tape measure and ruler to insure the product meets quality standards Identify product defects and complete appropriate documentation when defects are identified Rework and/or repair assembled equipment and products according to engineering specification changes Perform all work in accordance with quality standards and established safety procedures Cut plastics, metal and wood with a saw Drill holes, solder, file and package lamps Maintain a clean and safe work area Perform other tasks as necessary Qualification requirements Must be proficient in English . Must be able to follow directions Ability to perform work accurately and thoroughly Ability to use thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea High attention to detail and self-motivation skills Basic computer navigation/ utilization skills a plus High School Diploma or GED preferred Specific technical or vocational training or certification may be required; may be required to pass ruler test Physical demands and abilities Regularly lift 20-40 pounds; may have to lift up to 50 pounds. Regularly perform repetitive tasks Regularly possess manual dexterity to put parts or pieces together quickly and accurately Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Bending, reaching, use tools, and standing for long periods of time are also required. Coronet is an Equal Opportunity Employer

MAURY MICROWAVE JOB DESCRIPTION Job Title: Electrical Assembler FLSA Status: Non-Exempt Department: Manufacturing Reports to (Title): Production Manager The Electrical Assembler is responsible for safe, accurate, and efficient assembly of electrical parts using a variety of tools and equipment to build high precision test equipment according to required specifications, processes, and procedures. Fine motor skills and high-quality standards will be required to ensure efficient and accurate assembly, suitable for a high quality, high value final product. Essential Functions of the Position Soldering under a microscope Ability to work with through hole and surface mount components Ability to work with 0603 components Gap welding and wire bonding experience Experience with assembly of microwave components Ability to follow PCB layout and read electronic schematics Ability to be an independent worker and to be part of a team Requirements (education, prior work experience, special skills, etc.) 1-2 years of prior work experience in a manufacturing environment Job Qualifications and Training: High School Diploma Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance. Group 401(k) plan with company matching contributions. Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally Employee Training Required: Check all appropriate: _x_Safety _x_Company Policies _x_Quality System ___ERP

COMPANY CULTURE Our focus is to deliver world-class solutions to our customers, on time and of the highest quality as the preferred supplier of highly engineered, energetic, and pyrotechnic devices while developing our associates and maximizing long-term value for our shareholders through organic growth and targeted acquisitions. GENERAL STATEMENT OF DUTIES: An individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: An Assembler is an individual who under moderate supervision applies standard procedures to perform a variety of component assembly tasks, ensuring products meet our high standards Assembles components in accordance with drawings and operation sheets. Responsible for weighing, loading and pressing operations. Handle tooling and fixtures / use various hand tools to produce or modify parts. Maintains count and order progress and logs in time / quantities. Closes and assembles units (use of crimping and closure tools and epoxy applications). Soldering tasks, i.e. small wire soldering, terminal soldering, bridge wire welding. Assists with the packaging of pyrotechnic assemblies where required. Follows required company safety practices and quality procedures. Follows procedures as defined by CAD policies, procedures and ISO9001 requirements. Maintains confidentiality of all information processed. Perform other related duties as assigned. PHYSICAL DEMANDS: While performing the duties of this job, the employee is occasionally required to stretch, bend, kneel and stoop. The employee is regularly required to walk, communicate, and reach with hands and arms. The employee is frequently required to sit, stand, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds using appropriate moving devices. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to solder, fluxes, cleaners, epoxies, and masking agents while using appropriate personal protective equipment. Works in a temperature controlled environment. The noise level in the environment is usually low to moderate. DISCLAIMER The above information on this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Cartridge Actuated Devices is an Equal Opportunity Employer and encourages the application of female, minority, disabled, and veteran candidates. Due to the potential for exposure to ITAR controlled data, the incumbent in this role must be a US Person (US Citizen or US Permanent Resident). Due to the nature of our products, To the extent applicable to an employee's role, each employee must be able to obtain (and maintain) the ATF Possessor License as a condition of employment. Employment with Cartridge Actuated Devices is contingent upon the successful completion of a background investigation, including any required Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF) screening, and drug screening, as permitted by applicable law. The background investigation may include verification of employment history, education, criminal records, ATF-mandated checks, and other relevant information to determine suitability for employment. The drug screening will be conducted in accordance with state and federal regulations. Failure to successfully pass the background check, ATF screening, or drug screening, or the provision of false or misleading information during the application process, may result in withdrawal of a job offer or termination of employment. By proceeding with the application process, you acknowledge and consent to the background, ATF, and drug screening requirements as described above.

We are the manufacturer of the IMPACT AIR 45 Highspeed Handpiece. Our Handpiece is specifically engineered for surgical procedures handcrafted in the U.S. for nearly 40 years. We are an Englewood based company is ISO Certified and manufactures CE Marked products. Our products are available across the U.S., Canada, & Europe and are currently licensed in Australia & Korea. Job Description Experienced assembler to work in the manufacturing department with ability to handle very small parts in the production of a medical device. Reading and writing English is a must - ability to follow batch records and procedures; attention to detail and accuracy is required. Qualifications 2 to 3 years manufacturing / assembly experience required - High School diploma, reading and writing English is a must - attention to detail is essential - Additional Information Clean work in a pleasant environment - work hours are 7:45 am to 4:00 pm Monday to Friday. Health, Dental and Life Insurance Benefits after 90 days - 401K available after 1 year - Vacation and sick-time also available. Rate of pay per hour $11.50 to $12.50 depending on experience and qualifications.

Assemble or fabricate lighting parts, pieces or products using a variety of tools and equipment according to required specifications in a production line in a manufacturing organization. Essential duties and responsibilities Read, interpret and follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products Utilize hand held tools such as a hand held screw and drill gun Maintain inventory of product in work stations Perform quality work checks as well as measurements with a tape measure and ruler to insure the product meets quality standards Identify product defects and complete appropriate documentation when defects are identified Rework and/or repair assembled equipment and products according to engineering specification changes Perform all work in accordance with quality standards and established safety procedures Cut plastics, metal and wood with a saw Drill holes, solder, file and package lamps Maintain a clean and safe work area Perform other tasks as necessary Qualification requirements Must be proficient in English. Must be able to follow directions Ability to perform work accurately and thoroughly Ability to use thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea High attention to detail and self-motivation skills Basic computer navigation/ utilization skills a plus High School Diploma or GED preferred Specific technical or vocational training or certification may be required; may be required to pass ruler test Physical demands and abilities Regularly lift 20-40 pounds; may have to lift up to 50 pounds. Regularly perform repetitive tasks Regularly possess manual dexterity to put parts or pieces together quickly and accurately Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Bending, reaching, use tools, and standing for long periods of time are also required. Coronet is an Equal Opportunity Employer