Assembly technician jobs in Four Corners, TX

Working at Freudenberg: We will wow your world! Responsibilities: Assemble all filters based on a daily schedule. Ensure quality of product they are making meets standards set out by the supervisor and lead. Clean the surrounding area at the end of the shift. Quality check to make sure the correct product is being used. Qualifications: Knowledge of the proper material used to make filters that are scheduled The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Residential Filtration Technologies Inc.

Responsibilities: Assemble laser handpieces for medical laser systems. Oversee the production and testing of medical laser devices, including software-related components. Responsible for the design, inspection, testing, and quality control of components, equipment, and finished products. Requirements: Strong hands-on skills. Masters degree or above in physics, electronics, laser technology, or a related field (exceptional bachelors degree holders will also be considered). Preferably 2+ years of experience in laser applications or optical design for medical devices. Familiar with the working principles and types of lasers (e.g., semiconductor, solid-state, fiber) and their biomedical applications. Knowledge of basic laser safety standards in medical applications (e.g., IEC 60825). Excellent communication and interdisciplinary collaboration skills. Preferred Qualifications: Experience in medical device R&D, especially laser therapy or imaging equipment. Familiarity with optoelectronic detection and feedback control systems. Strong English reading and writing skills, capable of supporting international regulatory requirements. Job Type: Full-time Expected hours: 40 per week Work hours 8:30-5:30 M-F Paid holidays/vacations after 1st year Benefits: Health insurance Paid time off Schedule: 8 hour shift Work Location: In person

About Us A family-owned company in Sugar Land, Texas, Welker designs and manufactures innovative solutions for the oil and gas industry and beyond. With 65+ years of industry experience, ERP system, 3D CAD software, and on-site manual and computer-aided machines, we are a one-stop-shop for industry-leading products, turnkey solutions, and worldwide service. If you're looking to make a difference at a dynamic, forward-looking company, Welker might be the right fit for you. About Our Assembly Technician Our ideal candidate is a self-motivated Assembly Technician with a strong desire to learn about our products. If you take pride in assembling parts into our products, this is the position for you! It's a physical job - you may be on your feet for 90% to 95% of your workday. You will be expected to safely lift and carry items up to 50 pounds. Bending, stretching, and climbing ladders will be daily activities. Responsibilities Assemble parts to specifications accurately and within a timely manner, including assembling complete systems Learn and understand the technical specifications, drawing, and be able to follow work instructions Must have some knowledge, or be able to learn tubing, electrical wiring, and circuits Test products to work order specifications These are some of the more frequent tasks you could expect to perform during your workday, but you may be called upon to fulfill other duties as needed. Key Skills Communication: You will interact with peers, team leads, and managers in a kind and professional manner, because communication is essential for a successful day Teamwork: You work well with others with an attitude of cooperation and achievement, and you are committed to the success of the team as a whole Work Ethic: You are production-focused and have a highly developed sense of urgency and prioritization to help us meet our delivery timelines Commitment to Learning: You are committed to learning our extensive product line, from what these products do to understanding the mechanics of how they work Attention to Detail: You make a conscious effort to focus on quality and safety The Welker team is a diverse and motivated group. These key skills keep our Assembly department running smoothly. Qualifications Comfortable in a warehouse setting and with the physical requirements of the position One to two years of assembly experience preferred High school diploma, GED, or equivalent Forklift experience a plus; training and certification provided as needed Does this sound like you? Submit your application, and let's talk! This is a full-time position with the occasional opportunity for overtime. Starting salary is within the posted range and is determined by experience, education, and potential. Welker cares for our employees, so we offer competitive benefits including paid time off, paid holidays, health/dental/vision insurance, 401k, and tuition reimbursement.

The preparation, assembly, and repair of various types of oilfield products. Shipping and Receiving of repaired goods, as well as delivery. Stamping and labeling equipment. Able to operate air tools. Responsible for ensuring compliance with established corporate standards. Comply and participate in the company Health and Safety program. Housekeeping of shop and work area. Other duties as assigned. Job Duties/Responsibilities Computer literacy including software and database management is required. Provides technical and clerical support for related professional and technical personnel in the department. Performs independent, routine or repetitive assignments using a variety of simple techniques and standard work procedures. Constructing components to specifications. Ensuring successful use of components. Collecting materials and equipment. Examining connections for proper fit. Works within established guidelines. Skills/Knowledge Prolonged periods of time standing and/or walking performing repetitive tasks. Must be able to operate power tools Bend, stretch, twist, or reach out React quickly using hands, fingers, or feet Use muscles to lift, push, pull, or carry heavy objects. Ability to read and comprehend instructions. Possess basic written communication skills. Work in a fast-paced environment. Ability to stand and perform repetitive tasks for an extended period. Hand-eye coordination and strong attention to details. The employee must regularly lift and/or move up to 20 pounds, frequently lift and/or move up to 50 pounds. The employee must be able to operate a forklift while loading or unloading freight. Education High School Diploma or equivalent. Valid driver's license required. Experience Entry Level.

Primary Role Performs basic to advanced production work in the assembly and delivery of consoles, including onsite installations, inventory management, cost estimating, and process improvement. Responsibilities increase with level progression Essential Duties and Responsibilities Assemble components per BOM and approved production drawings. Process raw components using hand tools or applicable equipment. Maintain a clean and orderly shop floor and tools. Deliver components to the next process based on routing. Ensure safety standards are met; report any safety/security issues. Keep safety gear ready and available. Pull and stage parts per project BOM; report material issues. Pack orders per delivery method guidelines. Receive, inspect, and process deliveries in accounting software. Label and store inventory properly. Communicate with supervisor on part status and quality concerns. Meet production expectations and quality standards. Participate in onsite installations. Document and photograph production/fabrication/installation process. Qualifications High school diploma or GED, 1-3 months related experience or equivalent combination. Ability to speak, read, and write in English. Language skills in Spanish are an asset. Must be apply for and receive a Transportation Worker Identification Credential, TWIC card. Must be able to pass drug tests and participate in required random programs that are conducted via a third party per client guidelines/regulations. Microsoft Office and ERP experience preferred. Physical Demands Regularly standing, walking, sitting, reaching, kneeling, and lifting (up to 50lbs) Vision requirements include close, distance, color, peripheral, depth perception and focus adjustment. Working Environment / Location Regular exposure to moving mechanical parts. Moderate noise level. PPE Required: CSA Approved steel toed shoes, ear & eye protection.

La Porte, TX | Full-Time | Certified Great Place to Work Swagelok Southeast Texas, a Certified Great Place to Work, is seeking an experienced Assembly Technician III to join our Custom Solutions team in La Porte, TX. This position is ideal for someone who enjoys hands-on work, takes pride in precision and quality, and thrives in a collaborative, safety-focused environment. Position Summary: The Assembly Technician III independently performs a wide range of complex assemblies, including tube bending, instrumentation installations, and leak testing. This role works closely with Custom Solutions Engineers and Technical Advisors to interpret system layouts and ensure that every build meets Swagelok's high standards of quality and reliability. What You'll Do: Assemble and test basic to complex mechanical systems with minimal supervision. Perform precise tube bending, instrumentation, and fitting installations. Interpret and work from detailed drawings, blueprints, and technical specifications. Assist with technical questions related to system layouts and design. Maintain an organized, clean, and safe workspace while meeting productivity goals. Work Schedule: Monday - Friday, flexible start time between 6:00 AM - 8:00 AM 9-hour shift (8 paid hours) with 1-hour lunch and two 15-minute breaks Overtime required at times based on business needs Qualifications: High School Diploma or equivalent (required) 7+ years of assembly or instrumentation experience preferred Strong mechanical aptitude and familiarity with precision tools (calipers, torque wrenches, etc.) Ability to read and interpret drawings and schematics Strong communication, teamwork, and problem-solving skills At Swagelok Southeast Texas, we pride ourselves on craftsmanship, collaboration, and continuous improvement. Join a team where your skills make an impact and your contributions are valued.

Benefits: Bonus based on performance Employee discounts Flexible schedule Ali Güler Furniture is looking for an experienced Furniture Delivery & Assembly Specialist to join our team. This role involves delivering and assembling high-end furniture for customers, including out-of-state deliveries. Responsibilities: Assemble and install luxury furniture at customer locations Safely load, unload, and transport furniture Drive and operate a 26 ft box truck for local and long-distance deliveries Ensure all items are delivered in perfect condition Provide excellent customer service and maintain professionalism Requirements: ✔️ Experience in furniture delivery and assembly ✔️ Ability to drive a 26 ft box truck (CDL not required) ✔️ Comfortable with out-of-state travel for deliveries ✔️ Physically fit and able to lift heavy furniture ✔️ Strong work ethic and attention to detail ✔️ Flexible schedule - ability to work weekends and extended hours if needed Compensation & Benefits: 💰 $15 - $18 per hour (based on experience) 📌 Flexible hours - work schedules may vary 📌 Growth opportunities in a high-end furniture company If you have experience in furniture delivery and assembly and are comfortable with traveling for deliveries, we'd love to hear from you! Compensation: $15.00 - $18.00 per hour Our company is dedicated to serving our customers and our community. Our team is chosen for their knowledge, experience, training, efficiency and courtesy. If you want to be part of our home-grown culture and winning team, please apply today!

SEC Energy is a single-source provider of natural gas compression equipment, parts and services to all segments of the oil & gas industry. From 50 to 8,000 horsepower, gas, electric or dual drive, SEC is capable of designing and fabricating equipment to meet each customer's specific operating requirements. SEC also provides production, processing, and treating equipment, and an expansive network of warehouses that service locations across the United States. SEC capabilities expand beyond tradition manufacturing to further include turnkey engineering services, truck-based service technicians, manufacturer parts, and power generation equipment. Essential Duties & Responsibilities: * Reads shop notes, general arrangement and process flow diagrams and drawings. * Reads measuring devices such as tape measures, rulers and pressure gauges. * Assembles and installs skid mounted components such as pumps, vessels, pipe, pipe supports, structural supports, belts, pulleys and machine guards. * Performs pneumatic and mechanical tests on assembled components. * Disassembles components to replace defective parts or to prepare them for shipping. * Operates a variety of portable hand, electric and air powered tools such as impact wrenches, torque wrenches, combination wrenches, sockets, ratchets, band saw and grinders. * Operates stationary tools such as bench grinder, iron worker, drill press and chop saw. * Operates lifting equipment such as overhead cranes and jib cranes. * Records serial numbers and other information as required in ITP (inspection test plan). * Reports problems to line supervisor and actively participates in resolution. * Perform job duties in a safe manner and according to company safety procedures. * Reports potentially unsafe equipment and safety hazards to supervisor for immediate resolution. * Understands and follows oral and written instructions. * Establish and maintain effective working relationships with all departments and workers. * Actively participates in the development of Assembler I and other employees. * Performs the above and other duties as required with minimal supervision. Required education or minimum level: * High school education (GED) Experience: * 4+ years experience in compression related assembly or field environment. Skills: * Mechanical aptitude. * Ability to read tape measures and rulers in increments of 1/16" * Basic mathematic ability to add and subtract fractions, decimals and whole numbers. * Must have basic knowledge of commonly-used concepts, practices, and procedures within the assembly department. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Lifting up to 50 lbs. occasionally * Walking and standing frequently * Exposure to adverse weather, cramped conditions and some heavy lifting * Works in industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment

Stable and growing East Houston area company is looking for a Valve Assembler. This is a temp to hire position, with a probationary period of approximately 4 months. The company offers a robust benefits package once you convert, and they have been in business for over 100 years - offering a team that you can be a part of for a long time. This position will work with assembling and disassembling new and repaired equipment/parts. If you love working with your hands and are looking for a stable company that you can contribute your skills to - then please consider this position today! Duties: Maintain safety and follow policies & procedures Calibrate products/parts Assemble & disassemble new and/or repaired parts and equipment Test valves and accessories Troubleshoot as needed Other duties as specified Requirements: Manual dexterity Ability to move up to 70 lbs. Ability to pass fitness test Experience using loop calibrators and multi-meters Ability to read and understand English To learn more about this position, or to be considered - Please submit your resume today!

Responsible for the soldering and reworking of printed circuit boards in the SMT area. This role consists of providing soldering techniques and applications to reach the highest standards in our industry. The goal is to provide our customers with best-in-class quality and reliability for workmanship. Follow work instructions and assemble products to supplied documentation Properly scan in and out of jobs per provided work order and routing step Verify accuracy and count of PCBA's in and out of the work area Working with line operators and other assembly technicians to reduce potential quality escapes Keep a clean and organized workspace with daily maintenance in mind Communicate issues as they arise with SMT Supervisor/Manager Assist with other key areas of SMT manufacturing as required React positively to change and perform duties as assigned Customer first attitude Team oriented and self-motivated * 5+ years working in a full-scale production environment * Ability to solder alloys such as 63/37, SAC305, SN100, HMP * Working with flux types of RMA, Water Soluble and No Clean * Ability to rework and repair down to component level * Experience with Hot Air equipment * Computer literate * IPC-A-610 Standard knowledge * High School Diploma or equivalent * Flexible work schedule

Powell is an engineered to order manufacturer of switchgear and electrical equipment for the power generation industry. An Assembler II is responsible for putting together components or parts to create finished products. Four 10s Schedule: Monday-Thursday 4:30am-3:00pm. Position Summary An Assembler II is responsible for putting together components or parts to create finished products. They follow blueprints, work instructions, or diagrams to assemble products using various tools and equipment. Assemblers may work in manufacturing or production environments and may be required to perform quality checks and ensure that products meet specifications. They may also be responsible for maintaining a clean and organized work area and reporting any issues or defects to supervisors. Attention to detail, manual dexterity, and the ability to work as part of a team are important skills for an Assembler. Supervision None Essential Responsibilities •Build and assemble mechanical components for Switchgear and/or Breaker units according to engineering drawings and customer specifications using master copy, spec sheet, front elevation and WO files •Perform maintenance and proper use of tools. •Perform in process inspections; ensure quality by following standard work instructions and identifying any potential risks to product quality. •Perform all ship prep functions including splitting gear. •Assist in Root Cause Analysis on engineering changes and correct discrepancies •Assist a small team of employees to complete a specific task assigned as assigned by lead assembler and/or supervisor •Perform mechanical adjustments for switchgear •Promote a safety culture as well as attend all safety meetings. •Ensure that work areas remain clean and well organized. Minimum Qualifications •Minimum education level of a High School Diploma or General Education Equivalent Diploma is preferred. •2-4 years of experience in assembling medium to large sized metal boxes/enclosures or electrical switchgear •Ability to read a tape measure (including conversions from fraction to decimal and conversely from decimal to fraction and metric to imperial). •Must have a basic command of the English language, both written and verbal. •Basic knowledge of operating desktop computer. •Safely use variety of hand/power tools. •Lift up to 50lbs using proper lifting techniques. Preferred Qualifications •Basic MES system knowledge, Oracle preferred. Skills, Abilities & Other Requirements •Read and understand spec sheets and follow proper use of hardware by spec requirements. •Able to read and understand single and three-line drawings, including symbols •Able to interpret and execute change orders •Able to identify part discrepancies and properly write HFDs for corrections •Knowledge of mechanical drawings and designs •Ability to follow direction from Senior Assemblers and Lead Assemblers. •Effectively demonstrates on-time delivery and the ability to stay focused on goals and responsibilities. •Self-starter with ability to take on multiple tasks with a drive to succeed. •Challenges the status quo; looks for better or more efficient ways to get results. •Ability to adapt to new ideas, technology, processes or product changes. •Believes and displays through actions that our customers represent our current success and remain vital to our future growth. •Demonstrates integrity and ethical decision making. •Conscientious, thorough, accurate, and reliable when performing and completing job tasks. •Able to work effectively within your team and around other departments and their activities. •Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Working & Environmental Conditions Working Conditions · Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. · Required to wear personal protective equipment (PPE) (i.e., safety shoes, hard hats, bump caps, safety glasses, hearing protection, safety harnesses as required) and respirators when required. · Must be able to work from all type of ladders (step ladders, "A" frame ladders, etc.) · Working at heights usually no higher than 20 feet in the air on an elevated structure using proper lift equipment and Fall Protection Equipment. Physical Requirements · Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs or step ladders · Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction · Continuous standing and walking · Able to use upper extremities frequently, work with both arms above shoulders and use both arms at full length frequently. · Must be able to meet physical lifting demand up to 50lbs. · Frequent use of hand tools and power tools More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.

Full-time Description PRODUCTION/ASSEMBLY ASSOCIATE WHAT MAKES ALPHA MEASUREMENT SOLUTIONS SPECIAL At AlpHa Measurement Solutions, we make analytical sensors and instruments that are essential to everyday life. What we do matters; our products are used to test and monitor water quality in industrial, health, and safety applications worldwide. Our sensors are critical for wastewater and drinking water processing, environmental monitoring, pharmaceutical (vaccine) manufacturing, food & beverage supply, power generation, and many other fundamental applications. Municipalities, multinational organizations, and system integrators rely upon our sensors as critical, consumable components of their systems around the globe. We at AlpHa understand the important role we play in ensuring safe drinking water, clean aqueous environments, and the general health and safety of communities worldwide. BENEFITS & PERKS · Medical, Dental & Vision Insurance · Health Savings Accounts (HSAs) · Life Insurance · Short-Term Disability · 401k · Paid Vacation · 8 Paid Holidays per year · Paid Jury Duty Leave · Recognition and Reward Programs · Diverse & Inclusive Work Culture Position Summary The Production Associate performs all tasks involved in the production of the company's products. This includes fabrication, filling, sub-assembly, soldering, potting, final assembly, testing, screening, packaging, and packing to established methods and work instructions. The position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possible. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the following essential functions: Read routing and perform work as assigned by department supervisor Assemble units per specifications or work instructions, by product number and product type Fabricate or modify parts, using provided shop equipment and tools Attach appropriate labels to wires, products and packages Test product functional performance to ensure conformance to specifications before passing to next operation Record any defects or other data as requested by supervisors or managers Where applicable, understand serialized processes and trace data through products serial number Pack finished goods into correct packages and boxes Notify supervisor of any mechanical or material issues Maintain a clean and safe work area Performs other duties as required and assigned; duties and activities may change over time Required Key Competencies Ability to Work Quickly and Methodically Thoroughness and Attention to Details Ability to Follow Instructions Willingness to Work Flexibly Teamwork Orientation Technical Capacity Work Environment While performing the duties of this job, the employee may be exposed to fumes or airborne particles, various temperatures, and moving mechanical equipment. Physical Demands While performing the duties of this job, the employee is required to talk or hear. The position requires the ability to concentrate while doing repetitive tasks. The employee is required to sit, stand, walk, use hands and fingers to handle or feel, and reach with hands and arms. AlpHa Measurement Solutions provides equal employment opportunities (EEO) to all employees and applicants for employment. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. In addition to federal law requirements, AlpHa Measurement Solutions complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. AlpHa Measurement Solutions expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Improper interference with the ability of AlpHa Management Solutions' employees to perform their job duties may result in discipline up to and including discharge. Requirements High school diploma or GED Preferred Previous production experience Previous experience in production of electrochemical or electronic equipment a plus Must be able to routinely lift 25 pounds Must be able to work in fast-paced environments Occasional overtime to meet business needs Must be conversant in English for safe and effective performance of the job Must be eligible to work in the U.S. Salary Description $11.00

Axiom Space is guided by the vision to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy for the benefit of every human everywhere. Axiom Space is the leading provider of human spaceflight services and developer of human-rated space Axiom Extravehicular Mobility Unit. Axiom Space operates end-to-end missions to the International Space Station today while developing its successor, Axiom Station - a permanent commercial destination in low-Earth orbit that will sustain human growth off the planet and bring untold benefits back home. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Electronics Technician who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. POSITION SUMMARY Our team is looking for an energetic and dynamic Electronics Technician who will primarily be responsible for the assembly and test of electrical hardware form the developmental stages through flight. This position interfaces with employees and government agencies. This position reports to the AxEVA Production Lead. This role is onsite and will be based at our Gemini facility located in Webster, TX. KEY DUTIES & RESPONSIBILITIES The electronics technician will assemble, test, and integrate prototype, qualification, and space-rated avionics hardware. Fabricate avionics wire harnesses, terminations, connectors, pin and socket assemblies, harness shields, ground terminations, and related components per drawings. The ability to read and understand electrical drawings and diagrams of avionics systems, assemblies, and wiring layouts. Ability to assemble prototype and test boxes with minimalistic drawings. Familiarity with standard lab test equipment (multimeters, oscilloscopes, data acquisition boxes, etc.). Must be able to interact with all engineering disciplines and technical management in a professional team-oriented environment. Communicating project progress, status, and potential issues to stakeholders and leadership. Implementing and maintaining agile project management methodologies throughout the project lifecycle. Perform additional job duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience Associate degree required, or an equivalent combination of education and relevant experience; commercial or military aircraft experience strongly preferred. Minimum 2-5 years of hands-on experience as an electronics technician. Proven background in board-level, system-level, and spacecraft-level electronics hardware. Demonstrated expertise in fabricating, assembling, and testing avionics and electrical assemblies. Must hold one or more of the following certifications: NASA-STD-8739.4: Workmanship Standard for Crimping, Interconnecting Cables, Harnesses & Wiring IPC/WHMA-A-620: Requirements and Acceptance for Cable and Wire Harness Assemblies with Space and Military Applications (Electronic Hardware Addendum) IPC J-STD-001: Requirements for Soldered Electrical and Electronic Assemblies with Space and Military Applications NASA-STD-8739.2: Surface Mount Soldering NASA-STD-8739.3: Through-Hole Soldering NASA-STD-8739.1: Workmanship Standard for Polymeric Application on Electronic Assemblies Strong track record of delivering results in fast-paced, ambiguous environments. Proactive problem-solver with sound judgment and the ability to address complex challenges effectively. Excellent organizational skills with the ability to meet tight deadlines while ensuring high-quality results. Skills Passion for space and the mission Executes priorities with precision and pace Entrepreneurial, growth mindset High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies: Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT: Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.

Job Details Experienced Geospace Technologies - Houston, TX Full Time Any $10.00 - $10.00 Hourly None Day ManufacturingDescription Responsible for the soldering and reworking of printed circuit boards in the SMT area. This role consists of providing soldering techniques and applications to reach the highest standards in our industry. The goal is to provide our customers with best-in-class quality and reliability for workmanship. Follow work instructions and assemble products to supplied documentation Properly scan in and out of jobs per provided work order and routing step Verify accuracy and count of PCBA's in and out of the work area Working with line operators and other assembly technicians to reduce potential quality escapes Keep a clean and organized workspace with daily maintenance in mind Communicate issues as they arise with SMT Supervisor/Manager Assist with other key areas of SMT manufacturing as required React positively to change and perform duties as assigned Customer first attitude Team oriented and self-motivated Qualifications 5+ years working in a full-scale production environment Ability to solder alloys such as 63/37, SAC305, SN100, HMP Working with flux types of RMA, Water Soluble and No Clean Ability to rework and repair down to component level Experience with Hot Air equipment Computer literate IPC-A-610 Standard knowledge High School Diploma or equivalent Flexible work schedule

This role supports the Subsea Technologies division's assembly and testing activities. This role is responsible for assembling and testing complex subsea assemblies to internal, customer, and industry procedures/specifications. Responsibilities: * Individuals in the role assemble and test complex mechanical assemblies, often to close tolerances and detailed procedures. * Works under minimal supervision and may adapt procedures, techniques, tools, materials, and/or equipment to meet special needs. Resolves all but most complex problems and questions independently. * Works with others in the department for routine matters or to provide assistance. Additional contact may be needed with other departments to furnish or obtain information. Direct interface with Customer Representative and/or customer/third party witnesses. * Ability to operate High and Low-Pressure Pumps, Hydrostatic Pumps, High Torque Wrenches, Overhead Cranes, Jib Cranes, Forklifts, and Rigging. Ability to use hand tools, power tools, and measuring devices such as height gauges, adjustable parallels, calipers, and pressure gauges. * Assembles and tests mechanical assemblies according to Hunting/Enpro/Customer specifications. Applies advanced skills in procedures, techniques, tools, materials, and/or equipment in the area of expertise. * Completes required test documentation including test reports, failed test reports, and Non-Conformance Reports (NCR). Assists with FATs (Factory Acceptance Tests) and SITs (System Integration Tests) if needed. * Cleans components after assembly/disassembly according to specifications and verbal/written instructions. * Inputs and reviews labor data into ERP system (or manually tracked sheets) * Uses material handling equipment to move parts, components, and subassemblies from one work or storage area to another as required. * Performs all duties in a safe manner and keeps all employees aware of dangers in the work area. Practices good housekeeping in the work area. * Ability to comprehend all engineering and weld blueprints and all written engineering procedures. Knowledge of components and circuits and their interfaces at a sub-assembly level. Ability to read and interpret schematics and Bills of Material (BOM). * Ability to use a personal computer and/or workstation. * Construct, assemble, and test subsea tooling/equipment per specified procedures and quality requirements * Inspect parts for damage and record traceability on work order * Responsible for proper documentation of each step-in procedure performed * Supports customer deployments and retrievals of Hunting subsea products. Required Skills and Experience: * Required: High school diploma or equivalent (GED) * Enterprise Level ERP experience strongly recommended; Epicor or Dynamics 365 experience a plus * 5 years in a manufacturing environment with subsea assemblies is preferred. * Strong knowledge of high pressure hydraulic testing systems/components and general assembly practices and equipment, including the Ability to operate High and Low-Pressure Pumps, Hydrostatic Pumps, High Torque Wrenches, Overhead Cranes, Jib Cranes, Forklifts, and Rigging. Ability to use hand tools, power tools, and measuring devices such as height gauges, adjustable parallels, calipers, and pressure gauges. * Must be able to comprehend all engineering and weld blueprints and all written engineering procedures. Knowledge of components and circuits and their interfaces at a sub-assembly level. Ability to read and interpret schematics and Bills of Material (BOM). * Must possess technical aptitude, including addition, subtraction, multiplication, and division. * This role requires supporting offshore deployment activities. The candidate must pass all offshore requirements, such as but not limited to OGUK/OEUK, TWIC, Vision Testing, BOSIET, Safe Gulf/Rig Pass, Rigger, and general fire safety/first aid. Expected travel around 30%. * Must have strong written and verbal communication skills and be able to interact with customers and 3rd parties on the company's behalf. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is frequently required to stand, use hands to touch, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is required to walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 75 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and the ability to adjust focus. Work Environment/Conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * On-site presence is required. * This position will require work in manufacturing environments that are both indoors and outdoors in an un-airconditioned shop. * Travel will be required to support offsite product installation and support. * Occasional assignments will require evening or weekend schedules. * The noise level is usually moderate. Employee will occasionally work near moving mechanical parts. * Work will involve chemicals used with hydraulic testing, flushing, and assembling, including, but not limited to, testing fluids (transaqua, 443 etc), control fluids, jet lube, nickel-based grease, oils, acetone, cleaners, paints, etc. * Position requires working at moderate heights to assemble unites (approx., but not limited to 9') Candidates are required to be authorized to work in the United States. All employees must be able to comply with the company Drug and Alcohol Policy, which includes participation in Company random drug testing. Employment is subject to background checks appropriate to the position.

Who We Are: Nexus Water Group is a leading regulated water and wastewater utility serving more than 1.3 million people across 20 U.S. states and 2 Canadian provinces. "Nexus" means connection. Through the essential water and wastewater services we deliver, we have a very personal connection to the people, businesses, and communities we serve. This is why our operations are locally led and managed. Every day, over 1,300 professionals deliver vital, safe, and reliable service through over 670 water systems and 360 wastewater systems. What We Offer: * Paid Time Off: Starting at 3 weeks annually along with 11 company-paid holidays. * Health and Wellness Benefits: The first day of the month after your start, you'll have access to your health, dental, prescription and vision benefits to help you stay well. * 401(k) Program with Matching Contribution: We offer a 100% match on contributions up to 4% of your salary, plus an additional 3% employer contribution. * Grow With Us: Professional development opportunities through training, professional certifications, and education allowance. * Additional Benefits: Other great benefits include company provided life insurance and Employee Assistance Program just to name a few. Overview: The Construction Inspector is responsible for the monitoring, inspections, and reporting of quality and performance of capital improvement projects. This position reports to Director(s) of Engineering and serves as a primary support role for Project Managers. The position has a heavy focus on water and wastewater infrastructure construction including facilities, water distribution, sewer collection systems, and their respective sub trades. Perform project communication and project coordination, perform public works inspections, ensure quality control of materials and methods, maintain construction records and perform reporting, and manage construction contracts. This position's experience and knowledge of the primary responsibilities will be advanced and the Inspector III will work independently. What You'll Do: * Reads and interprets construction contracts, drawings, specifications and other project related documentation to effectively inspect, observe and report on contractor activities and to verify that the work is compliant; informs contractors and/or applicable managers of any deviations in compliance with contract documents or failure to rectify work. * Maintains accurate, up-to-date and factual daily log describing the activities and the work of the General Construction Contractor and/or their subcontractor, including conversations (phone calls, in person, etc.); prepares and submits related daily reports. * Utilizes and maintains the paper and electronic document control systems. * Maintains project record files; prepares deficiency reports and follows up to ensure correction. * Provides oversight on multiple, simultaneous projects; observes and reports on issues impacting the work or the progress of the work. Coordinates with the contractor on daily and weekly schedule tasks in the field and reports any delayed tasks to the Construction Manager. Advises contractor and reports non-compliant work or materials to the Construction Manager. * Conducts site safety inspections * Conducts site inspections for SWPPP compliance * Reviews, verifies, and recommends the quantities contained in the Contractor's monthly application for payment request and makes recommendations to the Construction Manager regarding payment of monthly application, Partial Substantial Completion, Substantial Completion, and Final Completion requests for payment; ensures timely Contractor submittal and Owner payment. * Attends and participates with the Contractor in all routine meetings and inspections as set forth in the Contract Documents and special meetings when requested; assists in responding to impacts and concerns of construction on the local community. * Assist operations staff on an as-needed basis for new service taps To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. What You'll Bring: Education * A high school diploma or equivalent with five (5) years related experience and/or training; or equivalent combination of education and experience is required. Experience * Experience providing inspections on projects for utilities including wastewater treatment plants, sanitary sewer lift stations, water treatment plants, booster pump stations, water storage tanks, and underground piping systems * Basic familiarity with a broad spectrum of materials, methods, and processes used in the construction of utility projects. * Knowledge of Microsoft Office Suite including Outlook, Excel, Word, and Project. Familiarity with utilizing Microsoft SharePoint and/or AutoDesk Construction Cloud is a plus. License * Valid Texas Driver's License with insurable driving record is required. Preferences * An ACI and/or ICC certification is preferred

Job Details Baytown, TX Full TimeDescription The Technical Engineer is responsible for providing exceptional customer service and technical support for the Material Take-off service by participating in client meetings, gathers and analyzes project specifications and data from model software for take-off process. This individual collaborates with sales, clients, and engineering to meet all project requirements and deliverables. POSITION DUTIES AND RESPONSIBILITIES: Serves as project liaison between engineering, sales, and the client to gather needed project documents. Participates in client sales meetings to understand the scope of work and explain to the client what information is needed to execute take-off process. Creates a plan outlining the execution of the work and the data download process to be reviewed with the clients. Gathers, analyzes, and documents information and data from models to support take-off process. Reviews project information, models, and details received for a variety of take-off projects. Proactively communicate with customers and sales to ensure all commitments and obligations are met and/or exceeded throughout the project/order. Proactively identify project issues and implement effective solutions. Keep abreast of latest developments in Revit software. Other duties as assigned to support the growth of MSI. Qualifications Bachelor's degree in Engineering or certification in Project or Construction Management, Business Management or related field (significant relevant experience will otherwise be considered). Must have hands-on experience and be proficient in using Revit software. Must be able to read/interpret construction 2D/3D drawings and blueprints and project specifications. Above average proficiency in MS Office Products, proficient skill level in Excel. Ability to effectively communicate technical concepts related to Revit to non-technical stakeholders, such as clients or sales prospects. Strong interpersonal and communication skills and the ability to work effectively with a wide range of personalities. Self-directed and able to independently manage time and projects in a fast-paced environment; results driven. PHYSICAL DEMANDS AND WORK ENVIRONMENT: There is a minimal risk of injury. Work hours are generally during normal business hours and average over 40 hours a week. May require some additional hours when working with customers. Some business travel may be required. #LI-DNI

SEC Energy is a single-source provider of natural gas compression equipment, parts and services to all segments of the oil & gas industry. From 50 to 8,000 horsepower, gas, electric or dual drive, SEC is capable of designing and fabricating equipment to meet each customer's specific operating requirements. SEC also provides production, processing, and treating equipment, and an expansive network of warehouses that service locations across the United States. SEC capabilities expand beyond tradition manufacturing to further include turnkey engineering services, truck-based service technicians, manufacturer parts, and power generation equipment. Essential Duties & Responsibilities: * Reads shop notes, general arrangement and process flow diagrams and drawings. * Reads measuring devices such as tape measures, rulers and pressure gauges. * Assembles and installs skid mounted components such as pumps, vessels, pipe, pipe supports, structural supports, belts, pulleys and machine guards. * Performs pneumatic and mechanical tests on assembled components. * Disassembles components to replace defective parts or to prepare them for shipping. * Operates a variety of portable hand, electric and air powered tools such as impact wrenches, torque wrenches, combination wrenches, sockets, ratchets, band saw and grinders. * Operates stationary tools such as bench grinder, iron worker, drill press and chop saw. * Operates lifting equipment such as overhead cranes and jib cranes. * Records serial numbers and other information as required in ITP (inspection test plan). * Reports problems to line supervisor and actively participates in resolution. * Perform job duties in a safe manner and according to company safety procedures. * Reports potentially unsafe equipment and safety hazards to supervisor for immediate resolution. * Understands and follows oral and written instructions. * Establish and maintain effective working relationships with all departments and workers. * Actively participates in the development of Assembler I and other employees. * Performs the above and other duties as required with minimal supervision. Required education or minimum level: * High school education (GED) Experience: * 0-2 Years experience in compression related assembly or field environment. Skills: * Mechanical aptitude. * Ability to read tape measures and rulers in increments of 1/16" * Basic mathematic ability to add and subtract fractions, decimals and whole numbers. * Must have basic knowledge of commonly-used concepts, practices, and procedures within the assembly department. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Lifting up to 50 lbs. occasionally * Walking and standing frequently * Exposure to adverse weather, cramped conditions and some heavy lifting * Works in industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment

Axiom Space is collaborating with Astrolab, Inc. to develop a Lunar Terrain Vehicle (LTV) for future Artemis missions, combining Axiom's advanced AxEMU spacesuit with Astrolab's FLEX rover to enable groundbreaking scientific exploration on the Moon's surface. This partnership reflects Axiom Space's broader mission to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy that will empower our civilization to transcend Earth for the benefit of every human, everywhere. Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Electrical Technician who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond. Employment in this role is contingent on Astrolab/Axiom being selected as a winner of NASA's LTVS contract. POSITION SUMMARY We are looking for a resilient, high-energy, experienced Electrical Technician who will primarily be responsible for the assembly and test of electrical hardware form the developmental stages through flight for the Lunar Terrain Vehicle (LTV) Program. This position interfaces with employees and government agencies. This position reports to the AxEVA Production Lead. This role is onsite and will be based at our Gemini facility located in Webster, TX. KEY DUTIES & RESPONSIBILITIES Assemble, test, and integrate prototype, qualification, and space-rated avionics hardware. Fabricate avionics wire harnesses, terminations, connectors, pin and socket assemblies, harness shields, ground terminations, and related components per drawings. Communicate project progress, status, and potential issues to stakeholders and leadership. Implement and maintain agile project management methodologies throughout the project lifecycle. Perform additional job duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education & Experience Associate degree required, or an equivalent combination of education and relevant experience; commercial or military aircraft experience strongly preferred. Minimum 5 years of hands-on experience as an electronics technician. Proven background in board-level, system-level, and spacecraft-level electronics hardware. Demonstrated expertise in fabricating, assembling, and testing avionics and electrical assemblies. Must hold one or more of the following certifications: IPC/WHMA-A-620: Requirements and Acceptance for Cable and Wire Harness Assemblies with Space and Military Applications (Electronic Hardware Addendum) IPC J-STD-001: Requirements for Soldered Electrical and Electronic Assemblies with Space and Military Applications NASA-STD-8739.1: Workmanship Standard for Polymeric Application on Electronic Assemblies Strong track record of delivering results in fast-paced, ambiguous environments. Proactive problem-solver with sound judgment and the ability to address complex challenges effectively. Excellent organizational skills with the ability to meet tight deadlines while ensuring high-quality results. Skills The ability to read and understand electrical drawings and diagrams of avionics systems, assemblies, and wiring layouts Familiarity with standard lab test equipment (multimeters, oscilloscopes, data acquisition boxes, etc.). Must be able to interact with all engineering disciplines and technical management in a professional team-oriented environment Executes priorities with precision and pace High EQ and ability to collaborate within teams and cross-functionally Tech-savvy in using systems and tools to move faster and smarter Excellent written and verbal communication skills Competencies: Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies: Accountability Sense of Urgency Extreme Ownership Execution and Delivery Efficiency Effectiveness WORK ENVIRONMENT: Generally, an office environment, but can involve inside or outside work depending on the task. Requirements Must be able to complete a U.S. government background investigation. Management has the prerogative to select at any level for which the position is advertised. Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position. Must be willing to work evenings and weekends as needed to meet critical project milestones. Physical Requirements Work may involve sitting or standing for extended periods (90% of the time) May require lifting and carrying up to 25 lbs. (5% of the time) Equipment and Machines Standard office equipment (PC, phone, printer, etc.) Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.