Assembly technician jobs in Sulphur, LA

Employment Type: Full-time / Permanent / Direct Hire Compensation: Up to $35/hour (equivalent to ~$72k annually, assuming no overtime) Benefits: medical, dental, vision, LTD/STD, HSA/FSA, term life, and supplemental health insurances (e.g., Aflac) for all employees (and their families if needed) 6 weeks PTO 401(k) paid parental leave We're looking for an Electrical Assembly Technician to join our team in Cedar Park, Texas. If you have strong wiring experience, enjoy hands-on electrical/mechanical assembly, and thrive in a structured build environment, this could be an excellent fit. In this role, you'll build, terminate, test, and inspect low-voltage wiring harnesses used in power-generation applications. You'll work closely with engineering, quality, and production teams to support prototype builds and scaled manufacturing. Candidates with wiring harness, cable assembly, electrical assembly, or electro-mechanical experience are highly encouraged to apply. Requirements 1-3+ years of hands-on experience in wiring harness assembly, cable assembly, electrical assembly, or electro-mechanical assembly. Ability to read wiring diagrams, schematics, pinout drawings, blueprints, and engineering plans. Experience with wiring tasks such as crimping, stripping, terminating, and splicing wires. Experience installing connectors, terminals, boots, heat-shrink, and labels. Experience routing and bundling wires using loom, braid, sleeving, clamps, or tie wraps. Hands-on soldering experience (PCB, SMT, or wiring-level soldering).Hands-on soldering experience (PCB, SMT, or wiring-level soldering). Experience performing basic electrical testing (continuity checks, polarity checks, multimeter use). Ability to follow build instructions, job travelers, BOMs, and revision-controlled documentation. Strong attention to detail, quality mindset, and reliability. High school diploma or equivalent. Successful completion of a background check and drug test is required. Nice-to-Haves IPC/WHMA-A-620 or J-STD-001 certification Experience with generator sets, industrial equipment, or power systems Experience in NPI, pilot builds, or prototype environments Exposure to Lean/5S manufacturing principles

At Ratermann Manufacturing, we're known for delivering reliable solutions and that starts with the people behind the products. We are seeking a dependable and safety-focused Production / Assembly Technician to join our team. This role involves the cleaning, reassembly, and handling of parts and tubing, as well as assisting in other areas of the facility as needed. The ideal candidate is a strong multitasker, works well in a team environment, and has a basic understanding of tools and computer systems. This role is hands-on, detail-focused, and essential to our promise of quality, accuracy, and fast delivery. What You'll Be Doing: Clean, inspect, and reassemble parts and tubing according to established procedures Safely operate and use a variety of hand and power tools Perform multiple tasks efficiently while maintaining quality and safety standards Assist other departments or work areas as needed Follow all safety policies, procedures, and guidelines at all times Accurately manage time and complete tasks within required deadlines Maintain a clean and organized work area Use basic computer systems for data entry, tracking, or reporting as required What You Bring: Ability to multitask and prioritize work effectively Strong understanding of workplace safety practices Comfortable using various tools and equipment Team-oriented with a willingness to assist where needed Basic computer skills or general computer knowledge preferred Ability to lift and move materials as required (some lifting involved) Good time management and attention to detail Manufacturing, assembly, or cleaning experience preferred but not required Physical Requirements Ability to stand for extended periods Ability to safely lift, carry, push, and pull materials weighing up to 50 lbs. Manual dexterity for handling parts and tools What We Offer: Full-time, stable employment Competitive pay based on experience Training provided Supportive team environment Opportunities for growth Why Join Ratermann? We're a fun, fast-paced, customer-obsessed company full of people who care deeply about doing things right. We stay flexible, back each other up, and focus on providing reliable solutions for our customers. When our customers succeed, we all succeed.

Production Assembly Technician - Fort Worth, TX MacroAir is hiring several Production Assembly Technicians to join our Texas manufacturing team. This is an assembly-first role focused on building high-quality fan products and sub-assemblies, with occasional support in packaging and staging as production demand requires. If you like working with your hands, building real products, and being part of a fast-moving operation-this role is for you. What You'll Do Assemble fan products and sub-assemblies using hand and power tools Perform mechanical and basic electromechanical assembly, including electrical panel/control assembly Follow work instructions, drawings, and quality standards Verify fit, function, and workmanship before the product moves downstream Maintain a clean, organized assembly workstation Support packaging, staging, and inventory accuracy during peak periods Identify inefficiencies or quality risks and help improve the process What We're Looking For Experience in mechanical or electromechanical assembly preferred Ability to read and follow basic assembly drawings, wiring diagrams, and work instructions Comfortable logging work orders and transactions in an ERP system High School diploma preferred, or equivalent hands-on manufacturing experience Ability to frequently lift 25-50 lbs and occasionally lift up to 70 lbs (with assistance as needed) Forklift certification is a plus Work Details Starting aat $20.00 per hour Location: Fort Worth, TX Schedule: 40 hours/week, Monday-Thursday, with overtime potential Open manufacturing environment with hand/power tools, moving equipment, and typical production noise

Trident Consulting is looking for a " Assembler - Mechanical III @ Houston, TX" for one of our clients. Job title : Assembler - Mechanical III Duration : 12+ months Pay rate : $22 - $24/hr on W2 Description: Gas Turbine Mechanic Would you like to work on mechanical equipment? Do you enjoy hands-on technical work? We are the leader in Turbomachinery. Our innovative physical and digital solutions improve efficiency, production and maximize value. Our team ensures high quality, consistency and reliability for all products throughout the complete life-cycle of our manufacturing production process. Partner with the best As a Gas Turbine Mechanic you will troubleshoot, test, assemble, disassemble and perform the visual inspection of Rotating Equipment. Whilst assisting in repairing and modifying non-conforming equipment, you will perform all test with minimal instruction. You will provide technical support across the business whilst complying with HS&E policies. As a Gas Turbine Mechanic, you will be responsible for: Demonstrating familiarity with hand, pneumatic and hydraulic tooling Accurately use precision measuring equipment (ID / OD / depth micrometers, calipers, etc.) Possessing a deep mechanical aptitude with ability to independently comprehend complex machining or assembly drawings Working as a team member to follow detailed work routers for inspection and repair of units and rotating equipment while under time constraints Providing On-Site support as needed Fuel your passion To be successful in this role you will: Have a High School Diploma or equivalent diploma Have minimum 5 years of overhaul and repair experience in at least one of the following areas: GE10, PGT 10/PGT 25, Frame 3/Frame 5 Have good knowledge of HSE requirements and be able to follow and update safety policies and procedures Job Description As a Mechanical Assembler in Aero you will perform various operations including but not limited to; disassembly, inspection and reassembly of rotating equipment including gas turbines units, and centrifugal compressors from multiple OEM's. About Trident: Trident Consulting is an award-winning IT/engineering staffing company founded in 2005 and headquartered in San Ramon, CA. We specialize in placing high-quality vetted technology and engineering professionals in contract and full-time roles. Trident's commitment is to deliver the best and brightest individuals in the industry for our clients' toughest requirements.

We are a premium brand rooted in craftsmanship, storytelling, and refined experience. Our products are hand-assembled with an emphasis on elegance and precision. We are seeking a Part-Time Kitting Associate to join our studio team, responsible for assembling and presenting product kits with the artistry and attention to detail that define our brand. Key Responsibilities Carefully hand-assemble product kits according to brand guidelines and visual standards Prepare and inspect each component for cleanliness and quality before assembly Follow meticulous visual instructions for folding, placement, labeling, and finishing Track timing and efficiency for ongoing refinement of the process Maintain an orderly and serene studio environment, conducive to detail-oriented work Support the studio team with occasional inventory counts and quality control Support the studio team with occasional pick, pack, and shipping of products Qualifications Experience in premium product assembly, gift wrapping, visual merchandising, or studio craft Strong visual awareness and manual precision Highly detail-oriented and comfortable with repetitive tasks done to exacting standards Able to work independently while maintaining consistency Reliable, punctual, and collaborative Preferred Skills Background in fine arts, design, or premium packaging Familiarity with delicate materials, refined finishes, and tactile presentation Appreciation for slow, intentional work and the aesthetic value of every detail Compensation & Perks Hourly rate commensurate with experience Flexible scheduling within part-time availability Access to brand perks and early product previews An inspiring studio environment rooted in artistry and ritual To Apply: Send your resume to ******************

What we provide: This is a seasonal position at Six Flags Over Texas, in Arlington, TX. It features a competitive hourly rate with perks, such as free entry to any Six Flags Park for all employees with each visit, additional complimentary tickets for friends and family, discounts on food and merchandise for all employees, flexible scheduling and weekly pay available. What you will do: Six Flags Over Texas is looking for a dedicated, organized individual to join the Entertainment Technical Services Team. As an Entertainment Technician, you will be responsible for assisting with the load in and load out of various show products and equipment, running assigned tracks for stage productions and special events, assisting with the installation and maintenance of all sets, props, sound, lighting and video equipment as needed, and working closely with the Technical Services team and Production Staff on any technical services projects as assigned. This individual will also ensure the smooth and safe operation of the assigned shows and special events. How you will do it: Perform daily operational duties to assist the department in the running of assigned show tracks Perform regular inspections of all scenic elements, audio and lighting systems, and special effects (fog machines) Repair and correct any issues quickly and safely to ensure a safe guest and team experience Assist the Technical Services team with new builds and repairs, load ins and load outs, system maintenance and other projects as assigned Effectively communicate with Entertainment Technical Services Leadership on any issues or safety concerns as they arise Operate various tools (including power tools), vehicles and equipment as assigned Adhere to safe work practices and policies that promote a safe work culture for the department and park Must be available to work weekends and all technical rehearsals, as assigned Must be available to work extended hours during specific times of the year Must be able to follow directions provided by the Technical Leadership team What you will need: Must be at least 18 years old. Must be able to work flexible hours on weekends during show and event operations as well as during tech rehearsals as needed Previous technical experience in the Entertainment/ Theme Park Industry preferred Must have some experience in carpentry, construction, or set building as well as some sound and/ or lighting experience Should be proficient in the use of hand tools and various construction equipment or be able to learn quickly Should have a basic knowledge of digital audio and lighting signal flow and be willing to learn the specific equipment used for each show and special event Strong motivated team player with a strong ability to multi-task Strong, verbal and written communication skills Must be able to work on projects independently as well as with a team Must ensure compliance with standard operating procedures, park policies, and regulations Must be able to move or lift tools or equipment weighing up to 50lbs Must be able to work indoors and outdoors in all types of weather conditions Should be able to work at heights of 20 feet or more and occasionally work at heights of up to 100 feet via catwalks, ladders and personnel lifts Valid driver's license to operate company vehicles, if assigned Other Notes: Reports to the Technical Services Supervisor or Lead and/ or the venue stage manager during the run of production or event Must be able to perform all other duties assigned or necessary to support the park operation as a whole Licenses & Certifications Valid Texas Driver's License

Malin's Field Service Technicians play in integral part in making sure our customers' equipment remains up and running. You will be responsible for performing preventative and scheduled maintenance on lift trucks, conveyors, and other warehouse equipment; troubleshooting, diagnosing, and completing repairs. Our Technicians are one-of-a-kind - they thrive in supporting and servicing our customers with excellence. Requirements: Safety- and process-oriented in work application and operating a company vehicle Demonstrated abilities and skillset in mechanics, hydraulics and electrical Experience and interest in interacting and supporting business customers Excellent communication skills - listening to customer concerns, documenting work and talking to customers Savvy problem-solver Valid in-state driver's license and ability to pass background screens Highschool diploma or GED Our Support for Technicians: Competitive hourly rate to start with incremental increases based on attendance and performance No flag hours Guaranteed 80 hours per pay period for Technician availability Paid training with our onboarding program and certifications Majority Monday-Friday Schedule within extended Business Hours Overtime Hours Available Quarterly Bonuses Company Vehicle with Fuel Card Uniform self-serve accounts with allowance Work Boot Stipend upon hire Cell Phone reimbursement Tool Purchase Program after technical training completion Career mobility from within - Specialty Technician roles, Team Lead, Manager, Trainer, Sales, Recruiting All Employee Benefits: Full benefits package after 30 days of continuous employment Medical, dental, vision, short- and long-term disability, supplemental medical, legal coverage, ID theft protection, pet insurance Company-paid life insurance policies Employee Assistance Program to all employees and their families 401k with Company Match 7 Paid Holidays Paid Time Off If you have ANY of the following... let's talk. You've graduated from a trade school or 2-year college You've got previous mechanical experience within lift truck, automotive, aviation OR military industry You're mechanically talented - you've been fixing cars since you were a kid What now? Hit the APPLY button to complete our (less than 5-minute) application. Our Recruiter will call you to go over your background. Or contact us directly at ************ and ask to be connected to the Recruiting team

Italcarrelli S.p.A. is an Italian company and a global leader in the design and manufacturing of technologically advanced special machines for handling semi-heavy materials across various industrial applications. Thanks to continuous investments in research for innovative solutions and automation, we supply our products to some of the most prominent companies worldwide. Job Offer We are looking for an Electromechanical Technician based in the Wichita Falls, Texas, USA, who will be responsible for handling the mechanical and electrical maintenance of our special machines used in glass handling. You will be hired directly by the American branch, Italcarrelli USA Corp. Would you like to join our team? Read the ad and join us! Your responsibilities will include: Installing spare parts, performing maintenance and repairs, and conducting necessary tests on machines manufactured by Italcarrelli S.p.A. at the Customer's site Diagnosing errors or technical issues and working with the Italcarrelli Technical Team to determine appropriate solutions Providing customer service and technical assistance Collaborating with the Italcarrelli Technical Team to share technical information Working with Italcarrelli's Sales Department to promote and sell spare parts Properly documenting the completion of each job in the company's management system During the commissioning of a new machine at the Customer's facility, configuring the machine and training the Customer's operators on the machine's features and functionality Tracking work progress and scheduling activities Building strong customer relationships by understanding their needs and promoting Italcarrelli's services Willing to consider travel requirements, up to 50% travel within the U.S. Main Workplace: Wichita Falls TX Working hours: Full-time daily work from Monday to Friday, with flexible hours. You are the ideal candidate if you have: A qualification in electronics or mechatronics Experience in machine maintenance, preferably in forklift maintenance and repair Proficient in English Digital skills: proficiency with Microsoft Office and Outlook Ability to read electrical and hydraulic diagrams Organizational skills A proactive attitude and ability to work independently Residence in Wichita Falls (main workplace) Full availability to travel to and carry out maintenance work on the whole territory of the USA and Mexico, if necessary, at Customers' premises up to 50% of the time Benefits: Permanent employment contract Competitive salary Paid time off and holidays Affordable medical, dental insurance Retirement plans Flexible working hours Reimbursement of travel expenses Laptop and mobile for business use Opportunities for professional growth with highly advanced machinery If you are ready to take on this new challenge, don't hesitate - apply by sending your updated CV. We look forward to meeting you!

About Us: LTIMindtree is a global technology consulting and digital solutions company that enables enterprises across industries to reimagine business models, accelerate innovation, and maximize growth by harnessing digital technologies. As a digital transformation partner to more than 700+ clients, LTIMindtree brings extensive domain and technology expertise to help drive superior competitive differentiation, customer experiences, and business outcomes in a converging world. Powered by nearly 90,000 talented and entrepreneurial professionals across more than 30 countries, LTIMindtree - a Larsen & Toubro Group company - combines the industry-acclaimed strengths of erstwhile Larsen and Toubro Infotech and Mindtree in solving the most complex business challenges and delivering transformation at scale. For more information, please visit ******************* Job Title: Rework/Soldering Technician with platform support(Onsite) Work Location: Austin, TX Job Description Soldering rework technician Knowledge on computer hardware Motherboards CPUs Memory DIMMs Addon cards Hard drives HDDs KVMs etc Ability to read electronic schematics PC board files BOM data etc Knowledge on IPC soldering standards Experience in soldering desoldering various SMT components fine pitch IC packages BGAs various connectors etc Experience in building custom cables Blue wire rework on multilayer PC boards Must be very skilled in Soldering rework domain Other Expectations from Candidate Attention to detail and well organized Able to lift 35 Lbs job may require shifting computers from one rack to another etc Candidate should have reliable transportation and are OK with daily commute as it is 100 onsite work Candidate must have good attitude communication skills Willingness to learn Benefits/perks listed below may vary depending on the nature of your employment with LTIMindtree (“LTIM”): Benefits and Perks: Comprehensive Medical Plan Covering Medical, Dental, Vision Short Term and Long-Term Disability Coverage 401(k) Plan with Company match Life Insurance Vacation Time, Sick Leave, Paid Holidays Paid Paternity and Maternity Leave The range displayed on each job posting reflects the minimum and maximum salary target for the position across all US locations. Within the range, individual pay is determined by work location and job level and additional factors including job-related skills, experience, and relevant education or training. Depending on the position offered, other forms of compensation may be provided as part of overall compensation like an annual performance-based bonus, sales incentive pay and other forms of bonus or variable compensation. Disclaimer: The compensation and benefits information provided herein is accurate as of the date of this posting. LTIMindtree is an equal opportunity employer that is committed to diversity in the workplace. Our employment decisions are made without regard to race, colour, creed, religion, sex (including pregnancy, childbirth or related medical conditions), gender identity or expression, national origin, ancestry, age, family-care status, veteran status, marital status, civil union status, domestic partnership status, military service, handicap or disability or history of handicap or disability, genetic information, atypical hereditary cellular or blood trait, union affiliation, affectional or sexual orientation or preference, or any other characteristic protected by applicable federal, state, or local law, except where such considerations are bona fide occupational qualifications permitted by law. Safe return to office: In order to comply with LTIMindtree' s company COVID-19 vaccine mandate, candidates must be able to provide proof of full vaccination against COVID-19 before or by the date of hire. Alternatively, one may submit a request for reasonable accommodation from LTIMindtree's COVID-19 vaccination mandate for approval, in accordance with applicable state and federal law, by the date of hire. Any request is subject to review through LTIMindtree's applicable processes

World Wide Technology is looking for a Data Center Technician. This role is part of WWT's Strategic Resourcing services and is a contract role. The candidate will be supporting a WWT customer and will be employed by one of WWT's preferred partners. The partner will provide full compensation and benefit information prior to employment with the partner. Job Description: Title: Data Center Technician Location: Roanoke, TX Available Shift:7 PM - 5 AM CST Wednesday, Thursday, Friday, Saturday Duration: 12 Months Contract Designation: Full Time Contingent - Contractors will be eligible for WWT's Full Time Employee Benefits Package including Medical, Vision, Dental, PTO, Paid Holidays, and more. Rate/Salary: $35/hr. Responsibilities: Infrastructure Management: Deploy, configure, and maintain server hardware, storage, and networking equipment in the data center. Perform routine hardware and software maintenance, upgrades, and patches. Monitoring and Troubleshooting: Monitor data center performance and respond to alerts promptly. Identify and troubleshoot hardware, network, and system issues to ensure optimal performance. Security and Compliance: Implement and enforce security measures to safeguard data center assets. Ensure compliance with industry standards and best practices. Documentation: Maintain accurate and up-to-date documentation of data center configurations, processes, and procedures. Qualifications: Proven experience in data center operations and infrastructure management. Strong knowledge of server hardware, storage systems, and networking protocols. Proficient in troubleshooting hardware and software issues. Familiarity with virtualization technologies. Understanding of security best practices and compliance standards. Excellent documentation and communication skills. Ability to work in a fast-paced and collaborative environment. World Wide Technology is looking for a Data Center Technician. This role is part of WWT's Strategic Resourcing services and is a contract role. The candidate will be supporting a WWT customer and will be employed by one of WWT's preferred partners. The partner will provide full compensation and benefit information prior to employment with the partner. Certain states and localities require employers to post a reasonable estimate of salary range. A reasonable estimate of the current pay range for this position is $30 to $35 hourly. Actual pay will be based on a variety of factors, including shift, location, experience, skill set, performance, licensure and certification, and business needs, and will be set by your employer. The range for this position in other geographic locations may differ. Certain positions may also be eligible for variable incentive compensation, such as bonuses or commissions, that is not included in base pay. If you have any questions or concerns about this posting, please email ****************** within 5 days of posting.

Engineering Technician Compensation: $30 - $40 /hour, depending on experience Inceed has partnered with a great company to help find a skilled Engineering Technician to join their team! Join a dynamic and innovative team as an Engineering Technician. This exciting opportunity involves working onsite in New Albany, Ohio, where you'll play a crucial role in supporting engineering projects. The company offers a collaborative atmosphere and values professional growth, making this an ideal opportunity for someone eager to advance their career. Key Responsibilities & Duties: Utilize Spotfire or Power BI for data visualization Query data using Python and SQL Collaborate with engineering teams to support project goals Assist in data analysis and interpretation Maintain accurate records and documentation Contribute to technical problem-solving efforts Support onsite engineering activities Required Qualifications & Experience: Proficiency in Spotfire or Power BI Experience with Python for data querying SQL querying skills Internship or relevant experience in a technical field Strong analytical and problem-solving skills Nice to Have Skills & Experience: Experience with data visualization tools Familiarity with engineering projects Knowledge of additional programming languages Perks & Benefits: 3 different medical health insurance plans, dental, and vision insurance Voluntary and Long-term disability insurance Paid time off, 401k, and holiday pay Weekly direct deposit or pay card deposit If you are interested in learning more about the Engineering Technician opportunity, please submit your resume for consideration. Our client is unable to provide sponsorship at this time. We are Inceed, a staffing direct placement firm who believes in the possibility of something better. Our mission is simple: We're here to help every person, whether client, candidate, or employee, find and secure what's better for them. Inceed is an equal opportunity employer. Inceed prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Data Center Optical Engineer Responsibilities Provide break-fix support, including off-hours, nights, and weekends as required Perform remote hands services, including installation, testing, and turn-up of data center equipment per MOPs Rack, stack, and cable network, server, and optical equipment using hand and power tools Install, manage, and troubleshoot Ethernet and fiber cabling (CAT5/6, SM/MM fiber, fan-outs, LC, RJ45) Perform optical testing and troubleshooting using power meters, OTDR, VFL, and tools for 10/100G circuits (BERT, RFC2544, EtherSAM, iPerf) Support network and optical transport turn-ups, including card-level troubleshooting and hardware replacement Validate equipment placement, port assignments, and cabling through site audits and document results Decommission hardware safely in accordance with data destruction and compliance procedures Replace and troubleshoot faulty routers, switches, servers, and network components Manage power infrastructure, including AC/DC systems, power feeds, ATS, and hot/cold aisle environments Interpret engineering diagrams, cut-sheets, and vendor documentation for accurate installations Supervise and coordinate third-party vendors and on-site contractors Skills 3-5 years of experience in data center operations or a similar technical environment Hands-on experience with racking, stacking, cabling, break-fix, and remote hands support Strong knowledge of Ethernet, fiber, optical transport, telephony, and IP networking concepts Proficiency with optical and network test tools and methodologies for high-speed circuits Ability to identify cable types, color codes, and equipment status indicators accurately Working knowledge of AC/DC power systems and data center infrastructure best practices

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

A great Client in Odessa is seeking to find an Electromechanical Tech - Job description:This position is for an industrial field services company operating with high standards of field and shop services in the Permian Basin. They value safety, quality, expertise and customer success while striving to maintain their employees work life balance. Role Summary/Purpose: The Electromechanical Technician, performs a wide variety of tasks both in shop and in the field involving electric motors, generators, switch gear, transformers and other powered equipment. Responsibilities include dismantling, rewinding, brazing, insulating, bracing, re-wedging, working with epoxies, retaining ring removal & refitting. Work is performed in accordance with approved instructions and direction of the shop manager.Essential Functions: Inspects motor/generator equipment for damage and evidence of malfunctions. Refurbishes, tests and rewinds motors/generators and repairs other electromechanical equipment. Dismantles and/or strips damaged or unserviceable mechanical equipment. Operates mobile equipment, tools & machinery efficiently and accurately. Maintains clean work areas, machines and equipment. Ensures correct documentation is used and filled out as specified on inspection and test plans, work instructions and any quality documents. Ensures that all specified records are correctly taken, reviewed and approved. Ensures that work is carried out in a safe manner and that relevant Safety and Quality documentation is complete for the task in hand. Ensures all lifting equipment is correctly used, and prior to use confirms its current inspection status. Ensures all work under their control is properly protected against damage while in the workshop or on site and correctly packages equipment for transport to ensure protection against damage. Complete all online and classroom training sessions. Qualifications/Requirements Willingness and flexibility to travel locally when required on short notice including off hours call outs. Minimum 3 years of experience with maintenance, repair of electromechanical equipment. Computer proficiency in MS Word, Excel and general use. Solid communication, planning, technical and people skills Ability to demonstrate strict compliance to safety standards Able to work without supervision and able to execute tasks when engaged on solo basis Able to work in a team environment and cooperate with fellow workers. Ability to clearly communicate in writing and verbally in English is a must. Capable and qualified to perform field work. Desired Characteristics Maintains a consistently high standard of housekeeping Ensures proper use and storage of equipment and chemicals Works safely at all times Capable of creative thinking and quick problem solving Innovative Team player Self-motivated Job Type: Full-time License/Certification: Driver's License (Required) Willingness to travel: 25% (Preferred)

EControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers' risk and clear a path to their success. We immerse ourselves in our customers' world, reveal unknowns and deliver integrated solutions. We have a global footprint ready to serve customers with high-level product support and deep application engineering. The company employs over 700 employees worldwide dedicated to serving our customers and markets on virtually every continent. We have locations in Texas, and Oklahoma, as well as multiple overseas operations in Europe, and Asia. Responsibilities · Support new equipment build efforts · Help plan and wire electrical portion of new equipment · Assemble and troubleshoot mechanical aspects of new equipment · Assist with installation of new equipment · Help update existing equipment and fixtures to improve quality, functionality and safety · Help fabricate basic fixtures and brackets for new and existing equipment · Troubleshoot and repair existing equipment Requirements / Qualifications · An associate degree in electro-mechanics or related technical discipline with vocational/technical training, or equivalent experience · Experience in reading mechanical drawings and wiring diagrams · Experience with electrical and mechanical troubleshooting · Ability to learn and understand electro-mechanical systems and robots · Proficient in the use of small manual and power tools · Working knowledge of computers including Windows and Microsoft applications · Excellent verbal communication and team skills · Experience assembling/installing industrial equipment

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities · Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. · Assemble equipment per engineered drawings or as instructed by others. · Inspect completed components for accuracy and functionality. · Maintain an orderly work area. · Properly maintain company supplied tooling. · Aid in developing of new procedures and improving existing procedures. · Must understand and comply with all safety rules and company policies of Weatherford. · Work assignments carried out to the highest quality level. · Performs any assembly type functions, using hand or power tools. · May operate both stationary and moving overhead cranes. · Operates any equipment needed to perform job. Experience & Education REQUIRED · 1-2 years prior assembly or manufacturing experience · Mechanical aptitude. · Ability to read blueprints and wiring diagrams PREFERRED · Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED · Good verbal communication skills. · Basic computer skills · Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Come join our team! We are a competitive employer offering medical, dental, vision and 401K match! This role will have the ability to assemble, trouble shoot, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus and fixtures Maintain electrical equipment to meet regulatory codes at the country, state and federal levels Perform safety-related functions and other miscellaneous electrical functions Competent with configuration of VFD's Must possess demonstrated ability to safely utilize a forklift and high lift Knowledge and ability to troubleshoot PLC's Must be physically capable of performing work from ladders, scaffolds, and roofs to install, maintain or repair electrical wiring, equipment and fixtures Proficient in testing and troubleshooting electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and megaohmeters, to ensure compatibility and safety of system Utilizing systematic approach to trouble shooting and problem solving and avoid replacing parts. Technical Skills Basic Electricity & Electronics DC Equipment & Controls Batteries & DC Circuits· Single-Phase Motors Transformers & AC Circuits Three-Phase Systems Electrical Measuring Instruments Electrical Safety & Protection Electrical Troubleshooting Power Supplies Digital Logic Systems Input/Output Devices Ability to read Electrical Schematics and mechanical blueprints Ladder logic knowledge Variable Frequency Drives Programmable Logic Controllers Knowledge and prior experience with Hydraulics Qualifications High School diploma or equivalent Preferred Electrician License or two year electrical program Candidates will be required to pass a pre-employment background, drug and work screen Must be available to work 12 hour day and night shifts, weekends, call-outs and overtime

2551 Valmont Dr Brenham Texas 77833-5418 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. A Brief Summary of This Position The Electromechanical Technician 13 performs highly skilled technical work in areas of installation, maintenance, and repair of electrical, electronic, and mechanical equipment with a wide knowledge and high degree of proficiency. Responsibilities include new installations of equipment, major repairs and replacements. The technicians help perform electrical and mechanical troubleshooting and repair plant production equipment. Shift: 1st (Days) Monday through Friday 7am-3pm Starting Hourly Pay Rate: $31.46 Opportunity for step pay increases at 90 days, 1 year & 2 years Essential Functions Troubleshoot electrical and electronic as well as hydraulic & pneumatic troubleshooting Service and maintain cranes, lathes, drills, presses, press brakes, shears, robots, tube mills, high frequency induction equipment, distribution equipment, CNC and NC equipment Perform diagnosis, testing, disassembly, inspecting, precise measuring, repair and re-assembly of plant equipment or components with limited instruction Perform pneumatic, hydraulic, mechanical, and electrical troubleshooting and repair plant production equipment as needed Responsible for installation of distribution equipment including gutters, disconnects, conduits and cables following UL and National Electrical Code Responsible for installation and repair of lighting up to 480V, repair of small fixtures, fans, and appliances while also assisting with repair of welders, wire feeds, plasma cutters, and motors over 110V Use trouble-shooting aids, such as digital VOM to interpret necessary readings Record labor and materials and report abnormal conditions and safety hazards Maintain a neat and orderly work area and perform general housecleaning tasks as needed May occasionally assist newer co-workers and technicians in lower level tiers with various tasks Operate all the hoists and forklifts in a safe and efficient manner Other duties as needed or assigned Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities) High school diploma or GED 2-3 years of relevant work experience The ability to climb and work at elevated heights of up to eighty feet The ability to work over ten hours a week in overtime when required for business needs One year of previous experience maintaining industrial equipment One year of previous experience using industrial lifting equipment, cranes or hoists One year of previous experience using at least one of the following troubleshooting aides: thermography gun, digital VOM, volt, ohm or amp meters The ability to accurately interpret electrical schematics, blueprints and National Electrical Code books for both AC & DC electrical systems The ability to read and understand hydraulic and pneumatic valves and prints Have the mechanical skills to fabricate electrical panels, cut and bend conduit, install the electrical equipment, pull wires, etc. that are common to the trade. A working knowledge of using Outlook email Math skills, addition, subtraction, multiplication, division and fractions are used to compute power, current, voltage, resistance, etc. Experience operating a forklift Experience welding and fabricating Self-starter requiring a minimum of supervision and direction Experience with pneumatic, hydraulic, and mechanical troubleshooting Highly Qualified Candidates Will Also Possess These Qualifications: 5+ years of relevant work experience Graduate of a technical school or apprenticeship program in a related field in Electrical Maintenance Knows and understands the various types of components used in an industrial environment such as disconnects, motor starters, relays, contactors, motors, transformers, switches (proximity and mechanical), timers, circuit protection, solenoids, etc. Understands the operation of welders and how to repair them. Requires knowledge of rectifiers and SCRs. Working Environment and Physical Efforts: Most of this job is performed in an indoor shop environment. The temperature range can be from 100 degrees in the summer to about 50 degrees in the winter. Most operations may expose employee to some type of disagreeable working conditions (wind, cold, heat, dust, dirt, fumes, noise, vibration, water, or oil). Working conditions may vary with specific work assignments. Some areas of the plant can be a noisy at times with sound levels reaching above 85 decibels. Hearing protection is available for those areas. Safety glasses and metatarsal safety shoes are required at all times in the plant. Gloves are required during certain operations. Face shield is required in addition to safety glasses when grinding. The employee will operate machines that use liquid coolant and may also be exposed to cast iron dust. The employees must be able to spend the entire work shift on their feet within the plant environment. Some outdoor work is required which includes work in conditions with abnormal temperatures. Employee works around material stacked overhead height. Conditions range from clean work to exposure to odors, fumes, drafts, wet conditions, dirt, grease, smoke, dust, noise, high temperatures and low frigid temperatures. These conditions range from severe to mild and can happen daily and in any combination. An Electromechanical Technician works in disagreeable weather conditions nearly 30% of the year. Employee must stand and walk, as well as handle parts, tools and equipment, gripping and grasping, on a frequent to constant basis. On an occasional to frequent basis, operator is required to lift/carry parts. Most weight moved is less than 30 lb. Although a few items do weigh more, a maximum lift of 50 lb. is all that is required. Standing, bending, pivoting, walking and reaching overhead are required during most of the shift. Climbing ladders, pulling wire through conduit, hanging fixtures and electrical components also requires a physical exertion. Lifting, carrying, bending, kneeling, stretching, crawling and working in awkward and/or confined positions is frequent with any electromechanical technician. Some of the physical tasks include hanging gearboxes on top of machines, changing brakes or the motors on cranes. Mental and Visual Effort The functions of this job require the employee to be alert at all times. Working in a fast-paced environment as well as the repetitious nature of this job requires both mental and visual concentration. The technician must be able to work quickly to repair plant equipment so operations can resume. There are often high stress situations where the technician needs to be able to work under adverse conditions for long periods of time using intense mental and visual concentration. Good hand to eye coordination with a good sense of depth perception is required at all time. Technicians need to be able to distinguish colors and be capable of reading manuals, schematics, labels, and other printed materials. Adequate hearing is required to diagnose problems with machines and equipment. Mental and visual concentration is needed to prevent injury to oneself, fellow workers and/or damage to the product. The use of any equipment or tools requires the employee to be alert at all times. If employee does not have a valid license from either of these states, the determination of acceptable vision will be made by the Safety Department on an individual basis. Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.