Assembly technician jobs in Weston, FL - 276 jobs

Gaumard is looking for talented individuals like you! Assemblers perform tasks that are necessary to the production process. They aid in the fabrication, maintenance, and repair of component parts and products. This role carefully follows assembly instructions and correctly places and attaches parts to create sub-assemblies or finished products. The person filling this position will have familiarity with working in a production environment and will be required to follow detailed instructions. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. SUPERVISION RECEIVED AND EXERCISED: Receives direct supervision from the Team Lead, and indirect supervision from the Department Manager. Does not exercise supervision over any other position. This position is located in Building 2 - Lo Fi Production Department. DUTIES AND RESPONSIBILITIES: * Follow detailed instructions to prepare parts for assembly according to procedures and guidelines. * Operate equipment necessary to produce materials and products. * Perform quality checks on products and parts. * Count finished products to determine if product orders are complete. * Effectively communicate manufacturing, material, or equipment issues to supervising personnel. * Work cooperatively with the assembly team to meet quotas and goals. * Assist other technical department personnel as required. * Make every effort to increase productivity and efficiency without compromising quality. * Perform routine area and equipment cleaning. * Perform related duties as assigned * Other duties as necessary QUALIFICATIONS/REQUIREMENTS: * Education: high school diploma or its equivalent. * An individual with an assembly background is preferred. * Experience in a production and manufacturing environment preferred. * Excellent manual dexterity and fine motor skills. * Able to follow detailed written and oral instructions. * Must be efficient and careful not to damage items. * Good organizational skills with strong attention to detail and the ability to organize items. PHYSICAL/MENTAL REQUIREMENTS: * Excellent manual dexterity and fine motor skills. * Frequent use of the arms, hands, and fingers is required to perform functions such as reaching, grabbing, pinching, picking, holding, and turning. * Frequent use of hand and power tools weighing up to 15lbs. * The employee is interchangeably required to sit, stand, and walk during their shift. * Employees may be required to bend, stoop or kneel to grab supplies and or materials * The employee must be able to lift, carry, push, or pull or move objects across the production floor, weighing up to 40 pounds with or without reasonable accommodation. * The employee may be required to reach at or below shoulder level and reach overhead for short to moderate periods. * Must be able to hear, understand, and distinguish sounds and speak clearly. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WHAT YOU'LL GET WHEN YOU JOIN THE GAUMARD FAMILY: * Competitive Pay * Full health benefits (medical, vision, dental) * Paid Time Off (PTO) * 11 Paid Holidays * Retirement plan with 100% employer match up to 5% of employee's contribution * Satisfaction knowing that you have joined a long-standing company Hours: Monday to Friday 8:00 AM to 4:30 PM must be willing and able to work some Saturdays or stay beyond scheduled shift if needed to meet business demands. The above supersedes all previous descriptions. This job description is intended to be a tool to describe the primary purpose of the job and the KEY duties and responsibilities. This description does not state or imply that the functions listed above are the only tasks to be performed by the employee occupying this position. Management has the right to add to or change the job responsibilities at any time. Equal Employment Opportunity Statement: Gaumard Scientific is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Gaumard Scientific is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Gaumard Scientific are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Gaumard Scientific will not tolerate discrimination or harassment based on any of these characteristics. Gaumard Scientific encourages applicants of all ages. Gaumard Scientific will provide reasonable accommodation to employees who have protected disabilities consistent with local law.

The Senior Electro-Mechanical Assembler is required to assemble, inspect and perform acceptance testing on complex electro-mechanical and hydraulic systems. To accomplish this effectively, the Senior Electro-Mechanical Assembler must work independently from: engineering drawings, engineering changes, bills of material, work instructions, test procedures and production schedules. The Senior Electro-Mechanical Assembler is also required to fault isolate manufacturing or workmanship defects and initiate corrective action. Responsibilities and Tasks: Perform all required electro-mechanical or hydraulic assembly, alignment or calibration of subassembly or system level hardware. This activity will be accomplished in accordance with engineering drawings, schematics, work instructions and quality standards May work directly with test engineering, fault isolate and repair warranty or customer-owned product in a repair depot environment using customer supplied failure reports, engineering drawings or repair manuals as a general guide Set up test equipment to perform acceptance inspection to assure compliance with drawing and contractual requirements Perform required acceptance testing in accordance with approved Acceptance Test Procedures or other engineering documents with Engineering assistance, if necessary. Perform basic diagnostics and fault isolation, as necessary Implement corrective action to improve product reliability May be required to use and operate test equipment and complex tools and fixtures Using a computer, assist in preparing assembly, alignment or repair work instructions Identify and participate in the development of special tooling and subsequent production proof Must be able to perform all subordinate tasks required to accomplish the above duties and perform other related duties as required Maintain accurate logs and records Responsible for the safe handling and disposal of hazardous materials and waste Assist other employees in learning new duties as assigned Education, Experience & License or Certification: High school diploma or equivalent and 3-5 years' experience in manufacturing complex electro-mechanical subassemblies, major assemblies and systems Must be capable of working independently from engineering drawings, schematics, performance specifications, quality standards and customer repair orders Intermediate-level computer operations skills required for access to technical data or other required documents Experience assembling and testing hydraulic systems is highly preferred #LI-HA1

Job Description Assembles mechanical units, fabricated parts/components and/or electrical/electronic systems to make subassemblies, assemblies or complete units using hand tools, power tools, jigs, fixtures and miscellaneous equipment. Fits, aligns, calibrates and adjusts parts and mechanisms to meet tolerances and product operating requirements; repairing units or products that have failed to meet requirements. This position requires knowledge that is acquired through experience, specialized education or training. The role has clearly defined procedures and tasks as well as defined guidelines to aid in decision making. Technical knowledge required is limited to the tasks performed in own discipline area and is considered basic. The tasks are generally routine and manual. The job is expected to follow detailed and defined rules / instructions and to make simple judgement in straightforward situations. Typically requires selecting between solutions already established. This job typically requires no experience. Hours:8:00am to 5:00pm Additional Job Details: The worker must be open to work first or second shift (2PM-11PM) Note Shift preference on the top of the resume. Electromechanical background required.

Landing Gear Technologies (LGT) is an FAA-Certified Repair Station specializing in the repair and overhaul of aircraft landing gears and components. We believe our organization can only be as good as the employees that stand behind it. In this constantly growing industry, we are always seeking talented and dedicated individuals to join our team. We are looking for a Landing Gear Assembly Technician to support the final assembly and build-up of aircraft landing gear components and assemblies. This position focuses on the precise reassembly and testing of overhauled or repaired parts, ensuring they meet OEM and FAA standards for quality and airworthiness. Duties and Responsibilities: · Perform final assembly and build-up of landing gear components, subassemblies, and full assemblies per OEM Component Maintenance Manuals (CMMs) and work instructions. · Install seals, O-rings, hardware, bushings, bearings, and fittings using appropriate tools and calibrated equipment. · Torque hardware to specified values and record all critical measurements and readings. · Ensure proper alignment, fitment, and functionality of all parts during assembly. · Perform hydraulic shock strut test, gap checks, and other test as required. · Collaborate with Quality teams to complete in-process and final inspections. · Tag and prepare completed assemblies for shipment or return to customer. · Maintain accurate records of work performed, including parts used, serial numbers, and inspection results. · Follow all safety guidelines and ensure a clean and organized work area. · Support continuous improvement initiatives and process consistency within the assembly area. Qualifications: · High school diploma or equivalent required; technical school or A&P license a plus. · 2+ years of experience in mechanical assembly, preferably in aerospace or MRO. · Proficient with hand tools, torque wrenches, hydraulic presses, and alignment tools. · Ability to interpret and follow CMMs, blueprints, and detailed work instructions. · Strong mechanical aptitude and high attention to detail. · Familiarity with FAA Part 145 repair station procedures is preferred. · Team player with strong communication and time management skills. Requirements Physical Requirements: · Ability to lift up to 50 lbs and stand for prolonged periods. · Good manual dexterity and hand-eye coordination. · Must be able to wear appropriate PPE and work in a shop environment. · Stand for long periods of time. · Must be able to hear, understand, and distinguish sounds and speak clearly. · Job Type: Full-time.

Job Description About the Role: The Assembly Technician plays a critical role in the manufacturing process by accurately assembling components and products according to detailed specifications and quality standards. This position ensures that all assembled products meet safety and performance requirements before moving to the next stage of production or shipment. The technician will work closely with engineering and quality assurance teams to identify and resolve assembly issues, contributing to continuous improvement initiatives. Attention to detail and adherence to safety protocols are paramount to maintain a safe and efficient work environment. Ultimately, the Assembly Technician helps deliver high-quality products that meet customer expectations and support the company's reputation for excellence. Minimum Qualifications: High school diploma or equivalent. Basic understanding of mechanical and electronic assembly processes. Ability to read and interpret technical drawings and assembly instructions. Proficiency in using hand and power tools safely and effectively. Strong attention to detail and manual dexterity. Preferred Qualifications: Previous experience in an assembly or manufacturing environment. Familiarity with quality control standards such as ISO or Six Sigma. Ability to use measurement tools such as calipers and micrometers. Responsibilities: Assemble mechanical and electronic components using hand tools, power tools, and assembly fixtures according to work instructions and blueprints. Inspect parts and assemblies for defects or deviations from specifications and report any quality issues to supervisors. Maintain a clean and organized work area to ensure safety and efficiency. Collaborate with team members and supervisors to troubleshoot assembly problems and implement corrective actions. Document assembly processes and complete production reports accurately and timely. Skills: The required skills enable the Assembly Technician to accurately interpret technical documents and perform precise assembly tasks, ensuring product quality and consistency. Manual dexterity and tool proficiency are essential for efficient and safe handling of components and equipment. Attention to detail helps in identifying defects early and maintaining high standards throughout the assembly process. Preferred skills such as knowledge of quality control and measurement tools enhance the technician's ability to contribute to process improvements and maintain compliance with industry standards. Effective communication and teamwork skills support collaboration with colleagues and supervisors to resolve issues and optimize production workflows.

THIS POSITION REQUIRES TRAVEL IN AND AROUND THE SURROUNDING STATES. Must be willing and able to travel to various customer sites. Paid lodging along with per diem/daily stipend. Once fully trained (approx 1-2 weeks - paid) you'll be out on the road, traveling to and working at our customer sites. Travel time and scheduling needs may vary. Who We Are National Assemblers, Inc is family-owned and the largest retail assembly company in the world, with over 10 Million products assembled for our customers last year. We are the trusted provider to the world's largest brands like Amazon, Walmart, Lowes, Wayfair, Bass Pro Shop, and most importantly, to individual customers who trust us in their homes. We were awarded “Assembly Company of the Year” for 2022 all due to our hardworking technicians who have pride in all they do! We are also the fastest growing, with over 100 new management roles created and filled last year! If you have the will and the skill, we have the opportunities for you! Who You Are You love working with your hands to build products. You're the one all of your family and friends call to assemble their new bike or grill. You have an entrepreneurial spirit and like the benefits and backing of a W-2 organization. You enjoy independence and are self-motivated. Customer satisfaction and high quality is your top goal when working. You are reliable and have a proven attendance record with reliable transportation. You're not afraid of hard work and enjoy a good challenge. If this sounds like you, we would love you to join our NAI family! What You'll Do You'll build bikes, grills, furniture & anything our customer's request. You'll be working independently and will need your own reliable transportation to get to the store. You'll assemble the product to National Assembler's specifications You'll build a strong rapport with customers and ensure 100% satisfaction by delivering good customer service and quality product What's In it For You Piece-rate earnings (hard work results in high pay = unlimited earning potential) Top-notch training certification program with a guaranteed minimum (get paid to learn a trade!) Mileage Reimbursement Overtime Pay Weekly Pay Medical/Dental/Vision Insurance (Benefits begin after 60 days of employment) 401K W-2 Employee Travel opportunities A nationwide support staff who is focused on your personal development and success You'll Meet These Basic Job Requirements You must be able to lift 40 pounds You must have your own RELIABLE transportation This job requires regular driving to retail customers (most stores are within 15 to 75 miles of your home) You must have basic hand tools APPLY NOW to start building your future with us! National Assemblers, Inc is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, sexual orientation, disability or handicap, veteran status and any state and local protected status.

The Assembly Technician is responsible for the assembly of valves. The Technician must be able to read and understand Engineering blueprints, follow work instructions precisely, and utilize any other approved and relevant documents for assembling valves. Exact demands will vary depending on the assigned job and station. The Technician may be required to be knowledgeable and competent in multiple stations within the Assembly department. The Technician exercises care and due diligence ensuring work instructions and procedures are followed and quality requirements are upheld (proper handling, visual appearance, and any other assembly specific quality elements). Responsibilities Be able to work well under pressure and in a high-volume manufacturing environment. Exercise required care when assembling and handling parts. Able to use and learn/interpret various gauges, meters, and other instrumentation. Attentive to their work and workspace to see, notify, and/or prevent UVC. Requirements Have a basic level of computer literacy. Is manually dexterous and works well with small hand-held parts. Be able to view parts through a microscope Be detail-oriented Able to work individually and in team settings as required. Can read Engineering blueprints, work instructions, and other relevant documents that are written in English. A background check and drug screen are contingent upon hiring The responsibilities and requirements listed above are representative of the knowledge, skill, and/or ability required. Business Overview: Valve Research & Manufacturing Co. is an industry leader in high-precision valve manufacturing for military and commercial aerospace and oceanographic applications. EEO Statement: Valve Research & Manufacturing Company believes that all persons are entitled to equal employment opportunities and does not discriminate against its employees or applicants because of such individua's race, color, religion, sex (including gender), sexual orientation, national origin, ancestry, age, martial status, disability, veteran status, genetic information, or any other basis prohibited by federal, state, or local law. Equal employment opportunity will be extended to all persons in all aspects of Valve Research & Manufacturing company-employee relationship, including recruitment, employment, training, promotion, transfer, corrective action, working condition, compensation, employee benefits, layoff, and termination. You should be proficient in: GD&T Electrical Schematics Soldering Mechanical Assembly Skills Engineering Degree High School / GED Experience in a Manufacturing Environment Blueprint Reading Basic Computer Skills Machines & technologies you'll use: Industrial/Parts Washing Systems Heat Gun 2D Drawings Multimeter (Fluke, Klein Tools) Power Tools (Makita, Black+Decker) Measurement Gauges Industrial Robot

Job description We are a gaming company that operates through out the Miami/ FLL area in various locations (gas stations and convenience stores). We are looking for a technician who will be responsible for the repair and maintenance of our games. Technician duties are, installing, servicing and repairing game machines. Some electric knowledge is required to test, repair and maintain the game machines and related gaming equipment. We are willing to train the right candidate. Duties: Builds, rebuilds, converts, adjusts, calibrates, and modifies any game machine and related gaming equipment. Diagnose causes of malfunctions and failures and take immediate appropriate action. Maintains a clean, safe, hazard-free work environment within area of responsibility. Performs all service requirements for gaming machines included in the installation and relocation. Checks for restocking of necessary supplies. Brings all areas up to standard. Discusses problem areas with Manager. Technical and/or electrical skills preferred Must Speak Both English/Spanish

Immediately Hiring: Mechanical Assembler Company: Dayton-Granger, Inc. Industry: Aviation and Aerospace Component Manufacturing Shift: 1st Shift, Monday-Friday Full-Time , Direct Hire, Competitive Pay, Great Benefits, Work-Life Balance Position Overview: Dayton-Granger, Inc. is immediately hiring a reliable and hands-on Mechanical Assembler to join our 1st Shift team in Fort Lauderdale, FL. This is a full-time, direct-hire opportunity with a stable company that's been manufacturing quality parts for over 81 years. In this role, you'll use tools like drills, rivet guns, and calipers to assemble parts with precision and care. You'll follow detailed work instructions, ensure parts are secure and properly sealed, and take pride in building products that meet high quality standards. If you have mechanical aptitude, experience in an assembly setting, and enjoy working with your hands in a clean, team-oriented environment-this could be a great fit for you. Key Responsibilities: Perform various assembly tasks such as drilling, riveting, and bonding structural components. Use pneumatic and handheld tools (e.g., riveting guns) to secure composite parts and structural assemblies. Apply sealants, such as epoxy, to joints and seams; ensure proper curing and surface prep. Read and interpret work orders and blueprints to determine assembly steps and correct specifications. Trim, sand, deflash, and fill fiberglass components to meet quality and finish standards. Using calipers, gauges, etc to maintain and ensure accuracy and precision Load and unload molds into ovens, presses, or autoclaves. Prepare and label materials according to production log ticket requirements. Maintain tools, molds, fixtures, and equipment in the Composite Assembly area. Follow company workmanship and quality standards throughout all tasks. Support other assigned duties as directed by management. Comply with all company safety policies and guidelines provided by the Facility Engineer and Safety Director. Requirements: High school diploma or equivalent required. Minimum 2 years of mechanical or structural assembly experience in a manufacturing environment Experience with various rivets, riveting tools, and assembly processes. Skilled in the safe use of hand tools, power tools, and precision measuring instruments (e.g., calipers, gauges, micrometers). Proficient in reading and interpreting blueprints, work instructions, and technical drawings. Physically capable of lifting and pushing up to 25 lbs. Strong attention to detail and commitment to quality standards. Effective communication and teamwork skills in a production environment. Strong written and verbal communication skills in English Preferred: Composite assembly experience Experience working in the aerospace industry Why You'll Love Working Here: We are a multi-generational team with members representing a diversity of cultures, educational backgrounds, experience levels and ideas all 'making it happen' from one location in beautiful, coastal South Florida. We are a long-standing supplier providing cutting edge products in support of long term aerospace programs, while at the same time developing new products to meet the needs of new customers, programs and up and coming markets. Additionally, DG loves its employees! The average employee tenure is around 10 years. Length of service milestones are celebrated company-wide and employees may make selections of anniversary gifts. Benefits Affordable comprehensive insurance coverage (Medical, Dental, Vision). 401(k) match. Paid Time Off (PTO) and paid holidays. Mental health benefits. Complimentary life insurance with the option for supplemental coverage. Paid parental leave Short-term and long-term disability coverage. Excellent work-life balance. Tuition reimbursement. Dynamic and collaborative work environment. On-site gym. Access to advanced technology and resources. Length of service/milestone anniversary gifts. Team-building activities. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This position requires use of or access to information subject to the Export Administration Regulations (“EAR') or the International Traffic in Arms Regulations (“ITAR'). Accordingly, all applicants must be U.S. persons within the meaning of these regulations. Under ITAR, a U.S. person is defined as a U.S. Citizen, U.S. Permanent Resident, or a person who is a protected individual under the Immigration and Naturalization Act (8 U.S.C. 1324b(a)(3)).

Full-time Description Join Our Team as a Mechanical Assembler - 1st and 2nd Shifts Available! Decimal Engineering, a dynamic manufacturing facility in Coral Springs, Florida, is looking for talented individuals to join our team as Mechanical Assemblers. Specializing in Precision CNC Machining and Custom Sheet Metal Fabrication, Decimal Engineering supports a range of high-tech industries, including aerospace, medical, automotive, electronics, and marine. If you're ready to work in a fast-paced, collaborative environment where safety and quality are paramount, this is your opportunity to grow and thrive! Key Responsibilities Interpret Blueprints and Diagrams: Follow blueprints, diagrams, engineering drawings, specifications, and other instructions to ensure accurate assembly of products. Gather Materials and Tools: Prepare by organizing parts, tools, and materials for efficient assembly. Assemble Components: Connect and fasten parts and subassemblies with precision, using hand tools such as screwdrivers and drills. Measure and Verify: Ensure all components meet specifications by measuring and checking for a precise fit. Perform Soldering (If Required): Join metal parts by applying solder to joints, following established techniques. Maintain Inventory and Quality: Monitor product inventory, perform quality checks, and identify and document any defects. Troubleshoot and Maintain Equipment: Keep equipment running smoothly by following guidelines and troubleshooting minor issues. Promote Safety and Cleanliness: Follow all safety protocols to maintain a safe and organized workspace. #ZR Requirements What We're Looking For Education: High School Diploma or GED Experience: Prior mechanical assembly experience is a plus, but not required. Skills: Basic reading comprehension, strong attention to detail, computer navigation, and communication skills. Physical Ability: Able to lift up to 20 pounds and perform repetitive tasks with manual dexterity. Attention to Detail: Ability to perform tasks accurately and maintain focus. Why Join Decimal Engineering? Fast-Paced Growth Environment: Be part of an innovative team where you'll never stop learning. Equal Opportunity Employer: We celebrate diversity and provide equal opportunities to all. Health and Safety First: Our facility is drug-free and adheres strictly to safety protocols. If you're driven by quality and excited to be part of a team that crafts products for cutting-edge industries, apply now to become a Mechanical Assembler with Decimal Engineering! Salary Description Hourly, Non-Exempt

As an S&C Electric team member, you'll work on projects that have real-world impact. You'll help transform the grid for resilient and reliable power worldwide. S&C has more than a 100-year history of innovation and has been 100% employee-owned since 2012. We continue this legacy as a trusted, forward-thinking leader in the electrical industry. You will advance a safer, more reliable, and more resilient electrical grid. Our products help the grid adapt to severe weather and transition to clean energy. We're big enough to be a respected industry leader but small enough for you to impact our company directly. Our commitment gives you opportunities to impact on and off the job positively. Join S&C to make an impact on tomorrow's energy challenges and become an employee-owner! Hours 6:00 am- 2:30 pm Overtime after shift or on Saturdays Compensation At S&C, we are dedicated to providing competitive and equitable compensation for all our team members, with a commitment to transparency in our pay practices. The estimated base pay for this position is $20 per hour. This role is also eligible for S&C's annual short-term incentive bonus, subject to eligibility criteria. Join Our Team as an Assembler! The Assembler-Basic role involves performing essential mechanical and electrical assembly tasks to support the production of S&C's products. This entry-level position requires basic wiring, mechanical assembly, and the ability to follow schematics and assembly instructions. Key Responsibilities: Perform basic mechanical assembly tasks, such as mounting simple components, route, and secure cables, and ensure proper fit and function. Complete plastic fuse “welding” to connect plastic components together. If required for the specific work area, learn to complete basic wiring tasks according to schematics and assembly instructions. Charge control boards as needed to prep them for assembly. Learn the foundations of subassemblies in order to progress within the team. Mount components and route/secure cables as needed. Inspect components and assemblies to ensure correct component selection, placement, and wiring, according to quality standards. Maintain accurate records of tasks performed, deviations, and any quality concerns. Adhere strictly to safety protocols while handling tools, equipment, and materials. Report any safety hazards promptly. Complete in-house training to learn how to read basic blueprints and Bills of Materials (BOLs). Use a forklift, lift truck, and other material handling equipment to move and position materials for assembly. Unpack components in the Supermarket to feed necessary materials to the assembly line. Verify quality standards via a quality assurance checklist. Test products in the test cage and document the results of those tests. Meet department production targets and consistently adhere to quality and safety standards, including the use of lifting devices and other ergonomic or safety devices when required. Understand and comply with all applicable Company policies and rules. Work with departmental mentors to gain and apply feedback in pursuit of improved work quality. Seek clarification when instructions or processes are not understood. Maintain regular and punctual attendance. Attend in-person or virtual meetings as requested or required. Communicate effectively and respectfully with others. Other responsibilities as assigned. Education: High School Diploma or GED What you'll Need To Succeed: 0-1 year of experience in mechanical or electrical assembly, which can include personal or hobby experience. Must have a desire to learn electrical/mechanical assembly processes, follow assembly instructions, and use various hand/power tools to assemble products. Proficient in performing precise and delicate tasks using hands and fingers. Able to manipulate small objects, operate tools, and handle intricate equipment effectively. Good attention to detail, with the ability to determine accurate part quantities consistently. Good communication skills (written and verbal) with the ability to articulate information efficiently and effectively to team members in a variety of production support departments. Basic computer skills with the ability to review and respond to requests via internal applications. Basic math skills with the ability to calculate measurements and weights. Good interpersonal and organizational skills with the ability to understand and complete requests given by team members inside and outside of the department. Ability to use hand tools, power tools, and measurement tools. Willingness to do physical work in a manufacturing environment. Ability and willingness to follow Health, Safety, and environment procedures accurately and report concerns promptly to the safety action team. Preferred: Ability to read blueprints. Preferred: Knowledge of Lean Manufacturing and Continuous Improvement manufacturing principles. Physical demands: Standing: Continuously required to stand and perform tasks. Walking: Frequently required to walk moderate distances across the S&C campus. Lifting & Carrying: Frequently required to solo or team lift and/or carry items exercising sound judgment to employ manual handling or machine lifts where required, and risk assessments, if appropriate. Low Posture: Frequently required to perform tasks using a low posture, including but not limited to stooping, bending, crawling, crouching, kneeling, or squatting. Position Self / Move: Frequently required to position self to perform tasks involving but not limited to reaching, twisting, rotating, and pushing/pulling. Manual Dexterity: Frequently required to use hand-eye coordination to control both hands and arms for a full range of motion to operate equipment/machinery/power tools/office productivity equipment. Ascending / Descending: Frequently ascending or descending stairs and ladders. Observation / Eyesight: Frequently required to observe details at close range including depth perception, peripheral vision, and the ability to differentiate between colors. S&C Electric is committed to equal-opportunity employment. All employees and applicants will be considered without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. If you are an individual with a disability and need an accommodation to complete the application, please email us at *******************. No fixed Deadline

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Job Description Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. What you Will Learn Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings Job Summary: This is an amazing opportunity for an Assembly and Test Mechanic. This is a 2nd Shift Monday -Friday 3:00pm to11:30PM. There is a shift differential offered on 2nd shift. What You Will Do Work from procedures, preliminary sketches, operations sheets, layouts, complicated drawings, written engineering, supervisor or lead mechanic or electronic work instructions. Layout, fabricates, assemble, and modify jet engine assembly or test articles, test stands, equipment, and support systems. Use a wide variety of power and mechanical tools to perform functional checks on engine assembly/components or test equipment/test components. Operate a wide variety of tools to assemble/disassemble a jet engine or APU or operate support utilities to run the test article. Check all phases of assembly/disassembly including inspecting critical functions for final inspection ensuring adherence to quality standards. Monitor instrumentation and perform engine service during test. Assist in the training activity of not more than two other team members during the assembly/disassembly or test process to ensure safe operation. Complete appropriate documentation/sign-off in assembly/disassembly or test procedures as required. After assembly, ensure test article is prepared for delivery to test cell. Perform basic instrumentation troubleshooting for test. Reconfigure or repair test stand, test systems and test equipment. Troubleshoot and maintain test facilities, support systems, and special test equipment. Inspect, maintain and complete necessary reporting on equipment, facilities and support systems. Remove instrumentation, equipment and utilities to de-prep, dismount, and preserve test article for shipment. Ensure all functions are performed according to Pratt & Whitney, Environmental Health & Safety (EHS) and Quality policies. Perform other related work assignments as required or directed by supervision and/or lead mechanics that support department objectives. What you Will Learn Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings Basic Qualifications: High school graduate or GED 2 years formal training in power-plant mechanics and testing 2 plus years of experience required Preferred Qualifications: A&P License Experience working from complicated drawings, specifications, procedures, and instructions to fabricate, configure, install, remove/replace and set up a variety of power systems, components, modules, and associated equipment Experience working with Solumina, SFWF, or similar programs. Ability to obtain and maintain certifications to operate powered industrial vehicles What We Offer Medical, Dental, Vision and Life Insurance Health Savings Accounts (HSA) Short-term disability, long-term disability and New Parent Leave Savings Plan with Company Automatic Contribution and potential for a Company Match Employee Scholar Program (available upon hire date) Employee Assistance Program (EAP) Paid-Time Off includes: vacation days, sick/personal days, incentive vacation, birthday holiday (8) Company recognized holidays and (5) Holiday Shutdown days from Christmas to the New Year Learn More and Apply Now! What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Job Description Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. **What you Will Learn** Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings **Job Summary:** This is an amazing opportunity for an Assembly and Test Mechanic. This is a 2nd Shift Monday -Friday 3:00pm to11:30PM. There is a shift differential offered on 2nd shift. **What You Will Do** Work from procedures, preliminary sketches, operations sheets, layouts, complicated drawings, written engineering, supervisor or lead mechanic or electronic work instructions. Layout, fabricates, assemble, and modify jet engine assembly or test articles, test stands, equipment, and support systems. Use a wide variety of power and mechanical tools to perform functional checks on engine assembly/components or test equipment/test components. Operate a wide variety of tools to assemble/disassemble a jet engine or APU or operate support utilities to run the test article. Check all phases of assembly/disassembly including inspecting critical functions for final inspection ensuring adherence to quality standards. Monitor instrumentation and perform engine service during test. Assist in the training activity of not more than two other team members during the assembly/disassembly or test process to ensure safe operation. Complete appropriate documentation/sign-off in assembly/disassembly or test procedures as required. After assembly, ensure test article is prepared for delivery to test cell. Perform basic instrumentation troubleshooting for test. Reconfigure or repair test stand, test systems and test equipment. Troubleshoot and maintain test facilities, support systems, and special test equipment. Inspect, maintain and complete necessary reporting on equipment, facilities and support systems. Remove instrumentation, equipment and utilities to de-prep, dismount, and preserve test article for shipment. Ensure all functions are performed according to Pratt & Whitney, Environmental Health & Safety (EHS) and Quality policies. Perform other related work assignments as required or directed by supervision and/or lead mechanics that support department objectives. **What you Will Learn** Skills, systems, and processes critical to aerospace manufacturing within a state of the art facility. Interpretation/Application of tech data to aide in the disassembly and assembly of commercial & military jet engines Forklift, scissor lift, and other PIV trainings **Basic Qualifications:** High school graduate or GED 2 years formal training in power-plant mechanics and testing 2 plus years of experience required **Preferred Qualifications:** A&P License Experience working from complicated drawings, specifications, procedures, and instructions to fabricate, configure, install, remove/replace and set up a variety of power systems, components, modules, and associated equipment Experience working with Solumina, SFWF, or similar programs. Ability to obtain and maintain certifications to operate powered industrial vehicles **What We Offer** Medical, Dental, Vision and Life Insurance Health Savings Accounts (HSA) Short-term disability, long-term disability and New Parent Leave Savings Plan with Company Automatic Contribution and potential for a Company Match Employee Scholar Program (available upon hire date) Employee Assistance Program (EAP) Paid-Time Off includes: vacation days, sick/personal days, incentive vacation, birthday holiday (8) Company recognized holidays and (5) Holiday Shutdown days from Christmas to the New Year **Learn More and Apply Now!** What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Job DescriptionDescription: About Us: Spot Zero is the industry-leading manufacturer of onboard dock and seawater reverse osmosis systems. From personal pleasure crafts to the world's finest mega yachts, we develop reverse osmosis systems to meet and exceed customer expectations. At Spot Zero, we believe in internal growth and development. Our Production Technician path is designed to help team members advance their skills and responsibilities while contributing to the company's success. Production Technician I - Entry Level Primary Focus: Inventory Handling and Receivables - Pick parts and components from inventory for builds - Receive and verify incoming shipments - Stock inventory accurately - Maintain clean and organized inventory areas - Learn basic product knowledge and assembly preparation This role serves as the foundation for advancing into assembly and technical build responsibilities. Production Technician II - Intermediate Level Primary Focus: Consumables and/or Sub-Assembly Work - Assemble basic system subcomponents, such as frames and brackets - Build and package consumable kits (e.g., filters and membranes) - Support Technicians III with component prep and layout - Continue developing skills in mechanical, plumbing, and electrical systems - Read and follow build sheets and assembly instructions This role prepares you for full system builds and troubleshooting responsibilities. Production Technician III - Advanced Level Job Summary: As Production Technician III, you will build, repair, and troubleshoot advanced water purification equipment for the marine industry. You will be responsible for full system assembly, testing, and final quality assurance. This is a hands-on position reporting to the General Manager. Key Responsibilities - Build complete water purification systems to company specifications - Test equipment to ensure operational standards are met - Troubleshoot and repair faulty components - Read wiring diagrams and follow complex assembly instructions - Maintain a safe, clean, and efficient work environment - Assist with continuous process improvements and mentoring of Tech I/II team members - Perform other related duties as assigned Requirements: Skills & Requirements - Strong mechanical aptitude - Experience or knowledge of electrical and plumbing systems preferred - Ability to troubleshoot and solve problems independently - Strong attention to detail and quality Education & Experience - High school diploma or GED required - Experience in a manufacturing or assembly environment preferred - Forklift certification (or ability to obtain if required) Physical Requirements - Regularly lift and move up to 50 lbs - Perform physical tasks such as bending, kneeling, reaching, and standing for long periods - Ability to work in both indoor and outdoor conditions Pre-Employment Requirements - Background check - Drug screening Benefits - Competitive Pay - Monthly Profit Sharing - an opportunity to share in the success and growth of the company - 100% Employer-Paid Health, Dental, Vision & Life Insurance (Employee-only coverage) - 401(k) with Company Match - Paid Time Off (PTO) and Paid Holidays EEO Statement Elite Marine, Southern Marine Supply, and Spot Zero are equal opportunity employers. We celebrate diversity and are committed to creating an inclusive environment for all employees. We maintain a drug-free workplace, and employment offers are contingent on passing our compliance screening process.

Job DescriptionDescription: We are seeking a hands-on and detail-oriented Production Technician to join our team. This role is responsible for assembling, testing, and troubleshooting Watermaker systems and components in a production environment. The ideal candidate has mechanical aptitude, follows precise instructions, and thrives in a fast-paced, quality-driven setting. You will collaborate with internal teams to ensure timely and accurate builds that meet our company's high standards. Production Responsibilities: Assemble complete Watermaker systems and sub-assemblies in accordance with engineering drawings, wiring diagrams, and schematics. Conduct in-process and final quality control inspections, including full system testing prior to shipment. Ensure the production area remains clean, organized, and compliant with safety protocols Accurately package and label systems for domestic and international shipment. Support inventory control by tracking components, reporting shortages, and assisting with material handling. Collaborate with the engineering and service teams to identify and resolve assembly issues Requirements: Qualifications: Technical degree or vocational training preferred; High school diploma or equivalent 1-3 years' experience in mechanical, electrical, or marine systems. Strong mechanical aptitude with basic plumbing and electrical knowledge. Ability to read technical diagrams, schematics, and wiring diagrams. Comfortable using hand tools, power tools, and testing instruments. Valid driver's license and ability to travel locally or occasionally overnight Excellent communication and problem-solving skills. Able to lift up to 50 lbs. and work in tight or elevated spaces.

Full-time Description We are seeking a hands-on and detail-oriented Production Technician to join our team. This role is responsible for assembling, testing, and troubleshooting Watermaker systems and components in a production environment. The ideal candidate has mechanical aptitude, follows precise instructions, and thrives in a fast-paced, quality-driven setting. You will collaborate with internal teams to ensure timely and accurate builds that meet our company's high standards. Production Responsibilities: Assemble complete Watermaker systems and sub-assemblies in accordance with engineering drawings, wiring diagrams, and schematics. Conduct in-process and final quality control inspections, including full system testing prior to shipment. Ensure the production area remains clean, organized, and compliant with safety protocols Accurately package and label systems for domestic and international shipment. Support inventory control by tracking components, reporting shortages, and assisting with material handling. Collaborate with the engineering and service teams to identify and resolve assembly issues Requirements Qualifications: Technical degree or vocational training preferred; High school diploma or equivalent 1-3 years' experience in mechanical, electrical, or marine systems. Strong mechanical aptitude with basic plumbing and electrical knowledge. Ability to read technical diagrams, schematics, and wiring diagrams. Comfortable using hand tools, power tools, and testing instruments. Valid driver's license and ability to travel locally or occasionally overnight Excellent communication and problem-solving skills. Able to lift up to 50 lbs. and work in tight or elevated spaces.

CDL / Box Truck Drivers wanted for a Home Delivery Independent Contractor opening! SE independent is looking for dedicated Owner-Operator/Independent Contractors to manage their own businesses within a local region/delivery market. Successful candidates will be expected to perform home deliveries and set up of new furniture and accessories for the customer base of a premier national furniture retailer. While having an opportunity to be home every evening, a successful Independent Contractor can potentially generate $100-150k+ in annual gross revenue. Home Daily, Local Routes Day shift hours Outstanding earnings potential $140,000+ annually Deliver furniture to customers and businesses 1099 position, Owner Operator Must have one FULL year of experience with your CDL Additional perks of CDL drivers with SEIDS Weekly settlements Direct deposit Work Description: Physically delivering furniture into customer's home Use a dispatch app, interact with customers, product handling & assembly, communicate as needed with dispatch/company representatives CDL Class A 1+ Years of verifiable commercial driving experience or 80 hours of training Must own Single Axle Day cab tractor Background check Driving test DOT Required drug and physical No recent DUI/DWI- 5 years No more than 6 points on MVR

GotWorX, Inc. Is currently seeking a Assembly Associate for our client based in the Fort Lauderdale area. Temp-Hire job opportunity for the right candidate. Client is currently offering a salary of $13.50, plus a benefits package one perm employee! Responsibilities: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials. Positions parts and subassemblies by using templates or reading measurements. Assembles components by examining connections for correct fit; fastening parts and subassemblies. Verifies specifications by measuring completed component.

Job DescriptionBenefits: Employee discounts Free food & snacks Opportunity for advancement Eat Clean delivers healthy and delicious food to clients nationally. We are a rapidly growing, privately held company focused on delicious food, healthy living and longevity. We are a growing healthy meal prep company dedicated to providing fresh, nutritious meals to our customers. We focus on quality ingredients, food safety, and efficient delivery to help people eat well with ease. Responsibilities Plate and assemble meals according to recipes and portion guidelines Ensure meals are visually appealing and consistent Follow food safety and sanitation standards Label, package, and prepare meals for delivery or pickup Maintain a clean and organized workspace Work efficiently in a fast-paced kitchen environment Qualifications Strong attention to detail and presentation Ability to follow instructions and portion standards Comfortable standing for extended periods Reliable, punctual, and team-oriented Food handling or kitchen experience is a plus (but not required) Passion for healthy food is a bonus Physical Demands and Other Requirements: Regularly required to work more than 8 hour at times Regularly required to use hands Regularly required to bend down to floor level or reach above eye level Must have reliable transportation Must have reliable means of communication Must wear slip-resistant, oil-resistant shoes while working at all time (provided by employee)