Computer Numerical Controller Inspector jobs at Boeing - 163 jobs

Who We Are Williams International is a privately-owned company that develops and manufactures jet engines for both military and commercial aircraft applications. We are a company of creators who deliver pioneering ideas and technologies that lead the aerospace industry. Our culture fosters creativity, collaboration, and continuous learning to position our team members to inspire each other and provide quality products and supporting services that exceed the expectations of our customers. The Opportunity The CNC Machinist will have responsibility for the setup and operation of miscellaneous computerized numerical control (CNC) and/or manual machines in Mod 7. The Machinist will also ensure that machines are properly tooled and may be required to make recommendations to modify programs as appropriate. Additionally, the CNC Machinist will: 1. Set-up and operation of miscellaneous CNC and/or manual machines, specifically mill experience. 2. Machine and/or tests parts according to engineering and customer standards and specifications. 3. Maintain accurate and reliable documentation. 4. Participate in establishing manufacturing methods, including machine, test, material and tooling requirements, to ensure parts are machined according to engineering tolerances/specifications. 5. Perform inspection and/or testing related activities to ensure that parts are machined in accordance with manufacturing standards and blueprint specifications. Visually inspects parts to ensure they are free of burrs or damaged surfaces. 6. Provide input and recommendations for selecting, installing, and adjusting CNC and manual machine cutting tools to ensure they are consistent with type and size of material being machined. 7. Remove burrs, sharp edges, tool marks and other irregularities from machined parts to ensure they are in accordance with engineering blueprints, and tolerance requirements. 8. Maintain proper identification of parts per planning specifications and ensure that accurate and reliable records and documentation are maintained. 9. Communicate change of shift requirements to ensure team members receive accurate and reliable information and documentation. 10. Perform routine maintenance of machines and equipment operated. 11. Clean, organize and maintain cellular manufacturing work area in accordance with established standards. 12. Ensure the continuous flow of materials and parts through the Cell. 13. Adhere to all safety standards and regulations. Qualifications High School or GED and a minimum of 2 years of machining experience, specifically mill experience. Reads, understands and correctly interprets blueprints, planning and manufacturing specifications. Demonstrated working knowledge of machining and/or testing related mathematical concepts. Has basic knowledge of inspection requirements and techniques. Rough burrs machined parts. May train, provide guidance and assist in developing lower skill level team members. * Must be capable of lifting 50 lbs. from floor to waist. (Note - must use a lift assist or assistance from other individual(s) when lifting in excess of 50 lbs.) Must be capable of pushing or pulling a weight of 60 lbs. Must have grip strength of at least 50 lbs. U.S. citizenship is required Position requires the ability to obtain a U.S. Government Security Clearance, if needed. Candidates selected may be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. For more information on Security Clearances, please visit: U. S. Department of State. Additional Information Williams International is a Drug Free Workplace where all new team members and contractors are subject to pre-employment drug testing for the following controlled substances: marijuana, cocaine, PCP, amphetamines, opioids and alcohol as policy dictates. Williams International is committed to equal employment opportunities for all individuals regardless of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, and protected veteran status. Please view Equal Employment Opportunity Posters provided by OFCCP here. If you are interested in applying for employment with Williams International and need special assistance or an accommodation to use our website or to apply for a position due to a physical and/or mental disability, please send an e-mail with your request to *******************. Or, please call ************. Determination on requests for reasonable accommodation is made on a case-by-case basis.

About the Company Hi-Tek is a family-owned and operated business located in Mason, Ohio who has a reputation as both a development and production source for all major gas turbine manufacturers. We offer a clean, climate-controlled environment and quality and safety are paramount. About the Role The Applications Engineer/ CNC Programmer is responsible for providing hands-on support on the manufacturing floor to develop new processes, improve existing protocols, train and mentor machinists, and help find solutions to critical manufacturing issues. The role will be creating programs and or modifying existing programs as needed to establish setup processes for the CNC Mill, Turn, or Grinding departments. CNC Programming and Siemens NX experience is required. THS IS A FULL TIME ONSITE POSITION LOCATED IN MASON, OHIO Responsibilities Applications Engineer/ CNC Programmer Analyzes and translates drawings and specifications of jobs to coordinate set-ups and operations in order to meet manufacturing and production. Determines best-practice processes for various machining operations and designates the proper tooling to ensure quality and cost-effective product delivery. Create tooling paths using CAD/CAM software and properly select the cutting tools that will be needed to generate code for various 3, 4, 5 multi-axis work for milling, turning, and grinding operations. Verify tool path in Vericut Software. Produce setup descriptions and tool lists for machinists. Documents and establishes standards to incorporate engineering changes and improvements. Provide training resources and training instructions of setup procedures and machining processes for machinists. Participate in ongoing conversations with engineers, supervisors, and machinists to resolve any issues related to processes, quality, part completion, and customer satisfaction to aid in continuous improvement to eliminate operating problems, increase productivity, and improve product quality. Participate in the conception and design of complex work-holding/fixtures/gages. Work with tooling vendors to evaluate and obtain the best cutting tool technologies for high-temperature superalloys commonly used in the Gas Turbine Industry. Develop prototypes and test new programs/methods working in a hands-on environment with shop floor personnel to gain feedback on potential improvements. Assists Quality Department in identifying and correcting programming issues that led to non-conformances. Provides time studies, router, and job cost review to ensure standards are up to date and being met. Create and or maintain documentation of all types as required. Follow work instructions, procedures, safety, and company policies as given. Qualifications Applications Engineer/ CNC Programmer 3 + years of Machine Shop experience required - CNC Mill, Lathe, and or Grind. 3+ years as a CNC Programmer. A MUST HAVE Siemens NX experience is required. A MUST HAVE FANUC and Okuma CNC Controls experience preferred. VERICUT software experience preferred. Must be well-versed in various cutting tools for super alloys. Proficiency in the use of CAD/CAM, word processing, and spreadsheet software. Required Skills Applications Engineer/ CNC Programmer Perform under AS9100 standards. Provide leadership to others through example and sharing of knowledge/skills. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to apply concepts of basic algebra, geometry, and trigonometry. Understand and apply statistical tools. Prioritize tasks. Able to plan, organize, and monitor work of self and others working autonomously and self-direct. Manage multiple projects simultaneously. Ability to read and interpret documents such as blueprints and travelers. Understand and communicate safety rules, operating and maintenance instructions, and procedure manual. Ability to draft routine reports. Ability to speak effectively before customers and/or employees of organization. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. CNC Programming. Siemens NX experience. Preferred Skills Applications Engineer/ CNC Programmer Experience with advanced manufacturing technology. Ability to create solutions and streamline setup procedures. Best-practices for tooling integration while working in a team environment. Pay range and compensation package Applications Engineer/ CNC Programmer $105,000 -$135,000 THS IS A FULL TIME ONSITE POSITION LOCATED IN MASON, OHIO Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! Hi-Tek is a Drug-Free Workplace and conducts pre-employment drug and background screening and random drug screening. EEO Statement: Hi-Tek is an Equal Opportunity Employer (EOE) that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion are a driving force in the success of our company. Hi-Tek is committed to diversity and inclusivity.

Job Title: CNC Programmer Pay Rate:$38.00-$41.00/hour Shift: 1st Employment Type: Direct/W2 with full benefits #CNCProgramming #AerospaceManufacturing #SiemensNX Position Overview We are seeking an experienced CNC Programmer to support advanced machining operations for aerospace components. This role focuses on programming complex machining centers using Siemens NX CAM, with an emphasis on high-precision aerospace superalloys and other advanced materials. The position involves developing probing routines, macros, and optimized toolpaths to improve efficiency, reduce errors, and support new product introduction (NPI) and production readiness. The ideal candidate is detail-oriented, thrives in a fast-paced environment, and collaborates effectively with engineering, production, and supply chain teams to deliver high-quality, on-time results. Key Responsibilities * Develop, optimize, and implement NX CAM programs for lathes, mills, 5-axis mill-turn, and turn-mill machining centers. * Create advanced probing routines and macros to drive efficiency and ensure error-proof machining. * Interpret engineering drawings, blueprints, and GD&T to generate accurate toolpaths and setups. * Identify and validate tooling and fixturing strategies for complex aerospace components. * Collaborate with engineering, supply chain, and operations to troubleshoot issues, improve cycle times, and mitigate risks during NPI or production transitions. * Manage multiple programming projects simultaneously, documenting changes and providing regular updates to internal leadership and customers. * Maintain CNC programs to reflect design or process updates, ensuring production readiness and compliance with quality standards. Core Qualifications * 5+ years of CNC programming experience in aerospace or precision manufacturing. * Proficiency with CAM software (ideally NX), including multi-axis programming, probing, and macro development. * Strong understanding of machining principles, cutting tools, fixture design, and process optimization. * Hands-on experience with machining aerospace-grade materials including 4140, stainless steel, aluminum, and exotic alloys (e.g., Hastelloy). * Familiarity with CNC equipment such as mills, lathes, wire EDM, 5-axis, and turn-mill centers. * Background in CAD software and GD&T applications. * Strong communication skills with the ability to work cross-functionally in a team-based environment. * U.S. citizen or Permanent Resident (Green Card holder) required due to project requirements. Preferred Qualifications & Skills * Advanced NX CAM programming skills with CAD experience. * Knowledge of probing systems (Renishaw, Siemens). * Familiarity with CNC controls such as Fanuc, Siemens, Heidenhain, Okuma. * Experience supporting new product introduction (NPI) and production launch readiness. * Background in CMM operation and programming. * Experience applying lean manufacturing or continuous improvement practices. Belcan provides a competitive pay and benefits package. Benefits offered MAY include health, dental, vision, and life insurance; 401(k); education assistance; paid time off including PTO, holidays, and paid leave required by law. Salary guidelines for similar roles at Belcan are $38.00-41.00 per hour. Guidelines vary based on many factors including but not limited to education, qualifications, experience, discipline, geographic location, market, and business considerations. Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws. Build a challenging and rewarding career with an industry leader!

Job DescriptionSalary: $40.00 - $45.00 hourly Primus Aerospace is a leading manufacturing partner to aerospace, defense & space OEMs / Primes & Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts; machined out of standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed, Northrop) to provide components to mission critical civilian and defense programs. Job Purpose: The CNC Programmer works to meet established standards of productivity and quality and will serve as a CNC Programmer for all jobs completed within the work cell. CNC Programmer Key Responsibilities and Accountabilities: Managing the daily production activities for assigned team, including machine programming for 3, 4 and 5 Axis Mills and CNC Lathes depending on team Complete ownership over assigned equipment as well as the teams daily job functions, responsibilities, fixtures, work instructions, team development, work flow and priorities Team members may include set-up machinists, operators and deburr staff Holding oneself and team accountable to company metrics and policies Must be able to work collaboratively and safely in a lean environment with cross-functional teams and varying levels of experience, including but not limited to Engineering, Quality, Production, Deburr and Project Managers Must be able to maintain professional demeanor while you positively inspire, influence, mentor and promote a safe, positive, engaging work atmosphere built on trust and teamwork Must be able to identify training needs, tooling recommendations, fixture design and implement best machining practices Must have solid understanding of quality standards and GD&T as it applies in an aerospace & defense environment Time management, team building, detail oriented and accurate execution of the CNC Mill / Lathe programming for both NPI and legacy repeat work. Maintain or improve legacy part quality standards and cycle times with process improvements in accordance with customer and company manufacturing standards, delivery commitments, internal procedures, and protocols Requirements Minimum of five (5) years of experience programming CNC Mills or CNC Lathes Thorough knowledge of Geometric Dimensioning and Tolerancing (GD&T) Thorough knowledge of print reading and mathematics Strong work ethic We offer comprehensive benefits including: PTO 10 paid holidays Medical, Dental, Vision, Short- and Long-term disability insurance 401K match Long and short-term incentive plans Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. At Joby, we've been working to make that dream a reality since 2009 and we're now in the final stages of certifying our aircraft with the FAA. With plans to launch our aircraft in the US and Dubai, we're now scaling manufacturing and preparing for the launch of our commercial service. Overview Joby Aviation is seeking a passionate self motivated individual to join our Composite Rapid Development team. This individual will be responsible for programming, machining, and routing processes that transform early-stage concepts into functional prototypes, enabling teams to derisk and validate their designs as quickly as possible to move into production. Responsibilities Perform DFM review of incoming designs; communicate issues to designers and press for clarity on function-critical details Plan and execute jobs autonomously: stock selection, cutter selection, workholding strategy Manage job queue and prioritize to maximize spindle uptime Maintain purchasing authority for tooling, workholding, and stock Follow jobs through downstream operations to understand how machined tools perform in composite layup Collaborate on workflow development to maximize efficiency while maintaining traceability and transparent timelines Required 5-axis CNC programming/machining experience HS Diploma or GED equivalent Fusion 360 experience (primary shop software); experience with other CAM platforms considered Strong GD&T knowledge Experience machining diverse materials: MDF, tooling board, aluminum alloys, steel, titanium, ceramics, composites, and engineered materials Ability to work in a fast-paced everchanging environment with aggressive timelines Excellent problem solving and communication skills Ability to lift 50lbs unaided Desired Prior experience with mold machining, stamping dies, or general toolmaking Assembly and mechanical systems experience Understanding of material characteristics and ability to research material properties Peripheral knowledge of adjacent manufacturing processes Additional Information The target base pay for this position is $44-$60/hour. The compensation package will be determined by job-related knowledge, skills, and experience. Joby also offers a comprehensive benefits package, including paid time off, healthcare benefits, a 401(k) plan with a company match, an employee stock purchase plan (ESPP), short-term and long-term disability coverage, life insurance, and more.

Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. At Joby, we've been working to make that dream a reality since 2009 and we're now in the final stages of certifying our aircraft with the FAA. With plans to launch our aircraft in the US and Dubai, we're now scaling manufacturing and preparing for the launch of our commercial service. Overview Joby Aviation is seeking a passionate self motivated individual to join our Composite Rapid Development team. This individual will be responsible for programming, machining, and routing processes that transform early-stage concepts into functional prototypes, enabling teams to derisk and validate their designs as quickly as possible to move into production. Responsibilities * Perform DFM review of incoming designs; communicate issues to designers and press for clarity on function-critical details * Plan and execute jobs autonomously: stock selection, cutter selection, workholding strategy * Manage job queue and prioritize to maximize spindle uptime * Maintain purchasing authority for tooling, workholding, and stock * Follow jobs through downstream operations to understand how machined tools perform in composite layup * Collaborate on workflow development to maximize efficiency while maintaining traceability and transparent timelines Required * 5-axis CNC programming/machining experience * HS Diploma or GED equivalent * Fusion 360 experience (primary shop software); experience with other CAM platforms considered * Strong GD&T knowledge * Experience machining diverse materials: MDF, tooling board, aluminum alloys, steel, titanium, ceramics, composites, and engineered materials * Ability to work in a fast-paced everchanging environment with aggressive timelines * Excellent problem solving and communication skills * Ability to lift 50lbs unaided Desired * Prior experience with mold machining, stamping dies, or general toolmaking * Assembly and mechanical systems experience * Understanding of material characteristics and ability to research material properties * Peripheral knowledge of adjacent manufacturing processes Additional Information The target base pay for this position is $44-$60/hour. The compensation package will be determined by job-related knowledge, skills, and experience. Joby also offers a comprehensive benefits package, including paid time off, healthcare benefits, a 401(k) plan with a company match, an employee stock purchase plan (ESPP), short-term and long-term disability coverage, life insurance, and more.

Job Description Who we are. Pattison ID - We design, build and maintain physical spaces and facilities for brands that want to use their physical spaces to drive value and impact for customers. We are one of the largest companies in our space, with 8 manufacturing facilities, 5 sales and operations offices and over 1,000 employees in the US and Canada. Benefits: 11 paid holidays Paid Time Off Comprehensive health, dental and vision benefits 401K Matching Paid training Great company culture Essential Functions: Manufacturing: Understanding of product and manufacturing workflow Prepare CAD files for programming Programming of cut files for the CNC router and other machines Design and program custom parts Reprogram as needed due to NC or design change Notify Production Supervisor immediately if there is a risk of not completing work on time per production schedule Assist with other duties when needed and properly trained for. (i.e. miscellaneous AutoCAD design work, assisting with the production floor) Health & Safety: Adheres to all Health and Safety Programs Rules, Procedures and Polices while on the production floor. PPE to be worn all times while on the production floor Maintains work area cleanliness throughout shift and end of shift work Quality Assurance: Adheres to all Quality Standards during programming and hand off Communicate to Lead, Production Supervisor and Plant Manager when quality issues arise that could impact final product to customer. Inventory Management: Complete all material and time tracking operations timely and accurately Stay informed of current inventory sizes and colors Specify correct materials in work orders released to the floor EDUCATION & EXPERIENCE Auto CAD programming knowledge 3D Visualization ability Detail Oriented Basic Microsoft Office products (i.e. Excel, Word) Ability to navigate construction documents CNC Router tooling knowledge preferred; not required Manufacturing and product assembly experience preferred; not required ACM Product knowledge preferred; not required Physical Demands: Ability to handle and lift up to up to 75 pounds at times for specific job functions May have to work with or around electrical equipment May be required to stand 80% of the work schedule May also engage in frequent bending, stooping, squatting, pushing, and pulling Pattison ID operates independently within The Jim Pattison Group, headquartered in Vancouver, and comprised of over 605 locations worldwide. The Jim Pattison Group is broadly based across the automotive, media, packaging, food sales and distribution, magazine distribution, entertainment, export, and financial industries. With sales of over $15 billion in 2022 and more than 49,500 employees, the Jim Pattison Group is the second-largest private company in Canada.

Job DescriptionSalary: $22/hr - $50.40/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense, and space OEMs, Primes, and Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts machined using standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed Martin, Northrop Grumman) to provide components for mission-critical civilian and defense programs. 1st Shift: M-Th 6am - 4:30pm, base pay 2nd Shift: M-Th 3:30pm - 2:00am, base pay plus 20% shift differential 3rd Shift:F,S,S 6am - 6:30pm, paid full 40hrs for 36hrs worked Machinist I* - $22/hr - $30/hr Machinist II* - $25/hr - $40/hr Setup Machinist* - $28/hr - $42/hr *position level will be assessed through the resume review and interview process. Pay rates are listed at base pay rate* Key Responsibilities Previous CNC Operator experience: mill turn and lathe GD&T print reading Knowledge of calipers, micrometers, metrology. Ability to indicate vices. Coordinate x, y, z Knowledge of machining principles. Operate CNC machines from provided work instructions from work order or set up personnel Verifying dimensional characteristics of parts Meet expected cycle times and production schedule Completion of all required paperwork in a timely manner Requirements Previous CNC Operator experience or technical school course work completed 3 years experience with machine set-ups (for Setup Machinist level) Reading blueprints and using hand tools Prioritizing tasks and maintaining production goals Self-starter with a good attitude Attention to detail and a strong desire to produce quality products Experience in a manufacturing environment utilizing lean manufacturing techniques is preferred Previous experience in Aerospace or defense machining environment preferred. We offer comprehensive benefits for full-time employees including: PTO 10 paid holidays Medical, Dental, Vision, Short- and Long-term disability insurance 401K match Long and short-term incentive plans Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cr

Job DescriptionOverview We are seeking a skilled CNC Lathe Programmer to join our dynamic team in Fairview, TN. If you have a passion for precision machining and a knack for problem-solving, this is the perfect opportunity for you! In this role, you'll be responsible for programming and operating advanced CNC lathes, ensuring high-quality production while maintaining equipment integrity. Join us and contribute to our commitment to excellence in manufacturing! Responsibilities Develop and optimize CNC programs for 5+ axis lathes using G-Code. Set up and operate CNC lathe machines to produce precision parts according to specifications. Troubleshoot CNC machines to minimize downtime and maintain production efficiency. Conduct regular maintenance on CNC equipment to ensure optimal performance. Collaborate with engineering and production teams to improve machining processes and product quality. Utilize manual machining skills as needed for prototype development and repairs. Maintain accurate records of production and machine maintenance activities. Qualifications Proven experience in CNC programming and operation, specifically with CNC lathes (5+ axis). Strong knowledge of G-Code and CNC machine repair techniques. Hands-on experience with manual machining skills. Ability to read and interpret technical drawings and blueprints. Excellent problem-solving skills and attention to detail. Strong communication and teamwork abilities. High school diploma or equivalent; technical degree or certification in CNC machining is a plus. You should be proficient in: CNC Programming G-Code Manual Machining Skills Machines & technologies you'll use: CNC Lathe (5+ axis)

Velocity Aerospace Group is a subsidiary of Precision Aviation Group (PAG), a full service, inventory supported MRO provider in the aviation industry with 21 domestic and international business units. Velocity operates 3 repair stations, specializing in the repair, overhaul, installation and upgrade of electromechanical, digital, pneumatic, avionic, and gyroscopic components for aircraft operators and maintainers in the commercial/regional airline, government and defense operation, business and general aviation markets. A CNC programmer writes code to automate power driven machines that cut and finish metal, wood or plastic such as lathes, grinders and mills. Key Responsibilities •Creates instructions for machinists. •Reviews 3D CAD design blueprints. •Makes calculations for programming including where materials should be cut. •Translates instructions into a computer automated manufacturing (CAM) program. •Communicates with engineers and clients who will use the programs. •Checks completed programs by running simulations or tests. •Prepares geometric layout of designs using proper software. •Determines sequence of operations in a program. •Chooses cutting tools that will be needed. •Analyzes job order and performs necessary calculations. •Writes programs and modifies existing ones for increased efficiency. •Analyzes and selects speeds and cutting tools for programs. •Makes improvements to set up times for a task and contouring of complex shapes. •Simplifies tooling time for workers and increases productivity for the client. •Evaluates all completed designs to validate their functions and ensure they successfully reduce time and money for the client. •Monitors all programs to make sure they follow blueprint instructions and safely and successfully complete the task. •Provides training for clients on automated systems. •Complies with all safety rules and regulations. Abilities & Qualificationv Ability to coordinate and work well with other departments and individuals within organization. Have strong team orientation. Competency in Microsoft Office, especially Excel. Excellent interpersonal, written & verbal communication skills Strong analytical skills, and the ability to summarize data and trends clearly Must have superior computer programming skills. Must have excellent reading comprehension skills. Good math skills, especially algebra, trigonometry and physics. Strong software development/engineering skills Creative problem solving and experimental design Experience with of CAD software Education and Experience Associate's degree in CNC programming, a computer-related field or a mechanical field. Bachelor's degree in computer programming or computer-related field.

Job DescriptionSalary: $22/hr - $50.40/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense, and space OEMs, Primes, and Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts machined using standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed Martin, Northrop Grumman) to provide components for mission-critical civilian and defense programs. 1st Shift: M-Th 6am - 4:30pm, base pay 2nd Shift: M-Th 4:00pm - 2:30am, base pay plus 20% shift differential 3rd Shift: F,S,S 6am - 6:30pm, paid full 40hrs for 36hrs worked Machinist I* - $22/hr - $30/hr Machinist II* - $25/hr - $40/hr Setup Machinist* - $28/hr - $42/hr *position level will be assessed through the resume review and interview process. Pay rates are listed at base pay rate* Key Responsibilities Previous CNC Operator experience: mill turn and lathe GD&T print reading Knowledge of calipers, micrometers, metrology. Ability to indicate vices. Coordinate x, y, z Knowledge of machining principles. Operate CNC machines from provided work instructions from work order or set up personnel Verifying dimensional characteristics of parts Meet expected cycle times and production schedule Completion of all required paperwork in a timely manner Requirements Previous CNC Operator experience or technical school course work completed 3 years experience with machine set-ups (for Setup Machinist level) Reading blueprints and using hand tools Prioritizing tasks and maintaining production goals Self-starter with a good attitude Attention to detail and a strong desire to produce quality products Experience in a manufacturing environment utilizing lean manufacturing techniques is preferred Previous experience in Aerospace or defense machining environment preferred. We offer comprehensive benefits for full-time employees including: PTO 10 paid holidays Medical, Dental, Vision, Short- and Long-term disability insurance 401K match Long and short-term incentive plans Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr

At PLI Manufacturing, a company of Phoenix Defense, our team members have incredible opportunities to support fabrication work of critical aerospace/space products for prime initiatives and projects in the aerospace and defense industries. We look for people who are team players, collaborative and bring bold new ideas. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. With every job we fill, our focus is on providing best in class service to our customers while offering the opportunity for career growth in a rewarding and innovative work environment. We are now hiring for a CNC Programmer. The CNC Programmer is responsible for programming CNC machines for work related to technical documentation and other manufacturing specifications documents. This position works with general guidance in a team environment and requires dexterity and a high level of accuracy and attention to detail. WHAT YOU WILL DO: Create positioning of carriage and/or tool, rate of feed, speed of rotation, tool changes, type of tool, sequence of operations and other variables. Create toolpath geometry using Mastercam and GibbsCAM. Interpret and edit G-Code. Create solid models and drawings using SolidWorks. Determine the suitability of a part for automation and may determine the appropriate machine assignments based on efficiency and quality requirements. Ability to proficiently work on complex blueprints, programming with unusual shapes, sizes, finishes and materials. Perform short runs on valuable and complex parts with potentially less opportunity to use trail runs to fine-tune programs. ABOUT YOU: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications: CNC Programmer Certificate, Associates or Bachelor's degree 5+ years of experience as a CNC Programmer on 3, 4, and 5 axis lathes and mills. 5+ years of experience as a CNC Programmer using MasterCam Software. Experience programming Heidenhain, Fanuc, Haas, Okuma CNC controls required. Understand and implement modern machining technology. Proficiently interpret in-depth aerospace blueprints KNOWLEDGE SKILLS ABILITIES AND OTHER CONTRIBUTIONS: Team-player who can handle working under pressure in a fast-paced environment. Work with minimal supervision and potentially provide work training and direction to others. Strong attention to detail, organizational, time management and follow-up skills. Manual dexterity skills required. BENEFITS: 401K Medical, dental, vision, and life insurance Accrued PTO and 10 paid holidays Tuition assistance for professional growth Perks at Work - employee discount program

Hi-Tek Manufacturing is searching for experienced 2nd shift CNC Grind Operators who wish to advance his or her career in advanced manufacturing technology by executing a higher level of workmanship. Hi-Tek offers competitive wages and a full benefit package which includes medical, dental, vision, life insurance, short and long-term disability, 9 paid holidays per year, paid vacation time, 401K plan with company match, HSA & Flex Spending programs, supplemental health plans, and more! Hi-Tek offers a clean, climate-controlled environment and we believe in quality and safety above all else. 2nd shift 3:30pm-12:00am Mon-Fri *OT may be required as needed. $20- $28 Per Hr Plus a 15% Shift Differential for 2nd Shift Hi-Tek is a Drug-Free Workplace and conducts pre-employment drug and background screening and random drug screening. Essential Duties and Tasks: CBN (cubic boron nitrate) plated wheel grinding radial. Follow all Hi-Tek policies and procedures, including the use of proper PPE. Analyze and interpret Op sheets, blueprints, mechanical drawings, and travelers to produce products that meet or exceed customer specifications. Verifies conformance of finished workpiece to customer specifications, using precision measuring tools and equipment as necessary. Maintain working knowledge of CNC principles, including G and M codes. Maintain working knowledge of rotary/linear axes. Selects, aligns, and secures fixtures, grinding wheels, and workpieces on machines as necessary to machine parts as required. Analyze, interpret CMM reports, and properly offset machine dimensions to meet customer specifications. Perform Deburr operations to within specified tolerances. Operate overhead crane when necessary. Report proper labor hours in the ERP system. Maintains a safe and clean work environment by performing daily housekeeping duties. Capable of running multiple machines, when assigned. Demonstrates the ability to lift 25 pounds occasionally. Any other duties as assigned to help drive our vision, fulfill our mission, and abide by our organization's values. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishment. Always take ownership and be accountable for your actions. Good and reliable attendance and a positive attitude are a must. Physical Conditions: Lift, push and/or pull 35 pounds. Stand at least 95% of the scheduled shift. Routinely perform reaching, twisting, bending, and grasping in order to move and set tools, equipment and material. Perform under AS9100 standards. Qualifications, Education and Experience: High school diploma or GED required. Duty related experience or/or including milling or lathe experience required - Min 1 yr. Ability to perform basic math functions. Troubleshooting/problem-solving skills Must be a United States Citizen, or a US Permanent Resident This job description is a tool to be followed. Other job duties may be assigned to you, this outline is not to be considered a detail description and you may have other duties assigned as needed. 2nd shift 3:30pm-12:00am Mon-Fri *OT may be required as needed.

The CNC Operator is responsible for editing CNC programs and operating CNC machines to achieve product specifications. This position requires following standard work instructions of each required specification ensuring quality production of parts. Essential Functions and Responsibilities include the following: Set up and operation of 3 axis and Horizontal CNC Mills utilizing set up sheets provided Carryout production, inspection, and machine operation duties Read and interpret prints, sketches, work orders, and follow verbal instructions. Use various measuring tools to perform first article and in process inspections (calipers, micrometers, height gage, etc.) Operate basic shop equipment (band saw, grinders, etc.) Build fixtures for work holding as required Deburr and clean parts as required Modify G-Code programs and adjust offsets as required to meet product conformity Evaluate experimental procedures and recommend changes or modifications for improved efficiency and production Replace cutting tools as required to meet production conformity Setup and operation of manual machine tools as required in support of CNC operations. Perform daily maintenance checks as required; includes greasing and/or oiling the machine and free equipment of chips Train entry level CNC machinists Effectively monitor and tend to one or more machine tools Other Duties as assigned. Additional Job Requirements Minimum three years of machine tool setup and operation experience in an ISO/AS/MIL STD prototype/job shop environment, utilizing complex documentation and verbal/written instruction. Must have a high level of attention to detail and excellent problem-solving skills Maintain a safe and clean workspace Follow established safety rules and regulations Regular scheduled attendance Indicate the percentage of time spent traveling - 0% Subject to applicable laws and Air Method's policies, regular attendance is an essential function of the position. All employees must follow Air Methods' employment practices and policies. Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position. Education & Experience High school diploma or general education degree (GED); and 3 years' experience working with CNC Machining and/or training; or equivalent combination of education and experience. Ability of producing parts utilizing manual mills and lathes Able to interpret and edit CNC programs at the machine Ability to read blueprints and job traveler specifications to determine the proper tooling required to set up each operation. Basic familiarity with the use of hand tools. Knowledge of machining the following materials: Stainless Steel, Aluminum, and assorted plastics. Skills General math skills Basic familiarity with the use of hand tools Ability to read and interpret blueprints Knowledge of machines in a manufacturing environment Computer Skills None Certificates, Licenses, Registrations None Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Minimum pay USD $24.96/Hr. Maximum Pay USD $30.55/Hr. Benefits For more information on our industry-leading benefits, please visit our benefits page here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Title: Machinist Department: 1007 - Machining Pay Range: $24.00 - $40.00 per hour (based on skill level and experience) Shift: 2nd shift (3:30pm - 12:00am) +10% shift differential The Machinist is responsible for the setup, operation, programming (as applicable), and inspection of manual and CNC machining equipment to produce high-quality parts that meet customer and engineering specifications. Depending on experience level, this role may range from performing basic machining and inspection tasks to advanced programming, troubleshooting, process optimization, and mentoring of other machinists. All Machinists are expected to work safely, maintain quality standards, and contribute to efficient shop operations. Responsibilities may vary based on skill level and experience Operate manual and CNC machining equipment to produce parts according to blueprints, routers, and engineering specifications. Load and unload parts into fixtures and ensure proper part handling and protection throughout the machining process. Perform machine setups, tooling changes, and offset adjustments as required. Upload, modify, or develop CNC programs, including adjustments to speeds, feeds, and cutting depths, as appropriate to experience level. Conduct in-process and final inspections, measuring part features against dimensional tolerances using precision inspection tools. Document inspection results, production data, and quality records accurately. Perform deburring, edge breaking, and surface blending using appropriate tools and techniques. Perform routine preventative maintenance, including monitoring coolant and lubricant levels and maintaining clean, organized work areas. Troubleshoot machining issues and collaborate with engineering, production, and maintenance to resolve problems efficiently. Use forklifts and material handling equipment safely to move materials within the shop. Log time and job activity accurately using company tracking systems. Follow all safety regulations, PPE requirements, and company policies; actively support a strong safety culture. Support continuous improvement initiatives to improve quality, efficiency, and waste reduction. Mentor and assist less experienced machinists, as applicable. Qualifications Must be a US citizen. Ability to read, write, and communicate effectively in English. Strong verbal and written communication skills. Working knowledge of shop math, ranging from basic fractions and decimals to advanced trigonometry and GD&T, depending on level. Knowledge of machining processes, metal properties, and material behavior. Proficiency with inspection tools such as calipers, micrometers, gauges, and CMMs (as applicable). Knowledge of hand tools, mechanical assemblies, part holding, and deburring methods. Ability to interact with computers and CNC controls at a level appropriate to experience. Strong attention to detail and commitment to quality. Familiarity with safety protocols and best practices in a manufacturing environment. Education and/or Experience High school diploma or equivalent required. Apprenticeship, vocational, or technical training preferred. Experience operating manual, semi-automated, and/or CNC machining equipment (e.g., lathes, mills, grinders). Experience levels may range from entry-level machining exposure to advanced CNC programming, setup, troubleshooting, and leadership. Prior mentoring or leadership experience is a plus for higher-level placements. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands and fingers to handle or feel and talk or hear. The employee is frequently required to sit. The employee is occasionally required to walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is occasionally required to lift up to 100 pounds. The vision requirements include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment can vary. Trident Maritime Systems is an EEO/AA employer that offers a comprehensive compensation package and opportunities for growth. As a government contractor, we adhere to regulations including the need for U.S. citizenship for certain positions. Offers of employment are contingent on and not considered finalized until the required background check and drug test has been performed and the results received and have been accessed. About Trident Maritime Systems - Custom Alloy Division Trident Maritime Systems is a global leader in providing innovative solutions for maritime and defense industries. Our Custom Alloy division in High Bridge, NJ, specializes in manufacturing high-quality seamless and welded pipe and tube solutions, as well as custom fabrications for critical applications. We serve government and commercial clients. For government, we work on military and defense contracts requiring precision and reliability. For commercial clients, we provide custom-engineered solutions across various industries. This dual focus allows us to take on diverse, high-pressure projects. Unlike mass production facilities, we create large, custom fittings tailored to specific needs. Our plant features large machines for heavy-duty work in a traditional manufacturing environment. It can be hot, cold, or dirty, but we prioritize safety and provide tools and training to ensure success. Trident Maritime Systems offers a comprehensive benefit package which includes: Cigna medical, dental; VSP vision. Flexible Spending Account & Health Savings Account (with company contributions) 401K Paid Time Off 10 Paid Holidays Safety shoe reimbursement, $200 per year Prescription safety glasses program Voluntary Supplemental Insurance Company Paid Life Insurance Voluntary Life Insurance Paid training and development opportunities Employee referral program 2nd shift - 3:30 pm - 12 am (+10% shift differential)

CNC Machinist Company: Science and Technology Corporation (STC) Clearance: Must pass STC and government background check; ability to obtain NASA security clearance if required Compensation: $67,000 - $85,000 annually, based on experience + overtime opportunities About the Role: Are you a skilled CNC Machinist who thrives on precision, innovation, and building what others can only imagine? Join our team at STC supporting NASA Langley and take part in manufacturing one-of-a-kind components for cutting-edge aerospace and research projects. You'll operate advanced 3-, 4-, and 5-axis machines, contribute to high-profile programs, and work alongside a team of experts dedicated to pushing technical boundaries. Key Responsibilities: Program CNC machine tools using Unigraphics, PowerMill, and/or Mastercam for multi-axis operations Set up and operate 3-, 4-, and 5-axis CNC milling centers with precision Operate conventional shop equipment, including lathes, mills, grinders, drill presses, and saws Select and set up tooling, jigs, fixtures, and correct speeds/feeds for various materials Set machine reference points and verify part setup, ensuring safe clearances and preventing collisions Order materials and tooling, ensuring proper certifications and traceability when required Develop and manage flight work packages including documentation upload, FIOS generation, and service coordination Estimate labor and materials for job completion Provide walk-in job support and collaborate with engineers on drawing interpretation and revisions Maintain strict compliance with all fabrication procedures and safety standards Support multi-disciplinary projects in a collaborative, team-oriented environment Stay current on machining and fabrication technologies to support continuous improvement Machine complex components to tight aerospace tolerances Work independently with minimal supervision while delivering high-quality, on-time results Operate forklifts, overhead cranes, and man lifts safely and efficiently Assist in the development of Job Hazard Analyses to support NASA safety protocols Participate in training for Fall Protection, Shop Machine Safety, and internal job processing software (JobBoss2) Perform overtime work as needed to meet project delivery schedules Requirements Proficient in CNC programming and setup (3-, 4-, and 5-axis) Experience operating both CNC and manual machine tools Strong understanding of aerospace tolerances and precision machining practices Ability to read and interpret complex engineering drawings and CAD models Familiarity with Microsoft Office 365 Strong communication skills and ability to work effectively across multiple departments Valid Virginia Driver's License with a clean record U.S. Citizenship required Ability to pass STC and government background check Preferred Qualifications: Prior experience supporting aerospace, defense, or research manufacturing Familiarity with NASA or government fabrication environments Knowledge of JobBoss2 or similar ERP/job tracking systems Why Join STC? Be part of a mission-driven team supporting NASA and groundbreaking research Competitive compensation: $67,000 - $85,000 annually, plus overtime Work with state-of-the-art equipment and tools Collaborative, team-oriented culture focused on quality and innovation Comprehensive benefits and ongoing professional development opportunities Ready to take your CNC skills to the next level and be part of something extraordinary? Apply now and help us shape the future of aerospace manufacturing.

Job Title: 3-4 Axis CNC Milling Set-up Machinist Duties include but are not limited to the following: Determine appropriate tooling, setup, and fixtures necessary to efficiently run jobs Change/set tools, collets, tool holders, as required by program Identify and correct worn tooling, subpar finishes, excessive burrs Determine/set all tooling offsets Produce quality parts within production rates Adjusts speeds and feeds Assists others with any issues on CNCs Trains operators on set-up, operation, and minor repairs Adheres to ISO9001/AS9100 standards Review production process for improvements Troubleshoot and repair machines, when possible Keep logs of down-time, maintenance performed, and repairs Read work orders/bill of materials to determine product specifications Responsible for quantity and quality to meet efficiency rates Use various types of equipment and machinery Maintain machinery during operation/direct scheduled maintenance Inspect products to ensure product excellence and quality using measuring tools (calipers/micrometer) Store or place product in designated areas Complete all necessary data to ensure production rates are met Report and/or enter production data into the company ERP system Ensure and observe all safety and housekeeping rules and guidelines, including carrying out daily safety inspections Participate in all assigned training, including health and safety sessions Other duties as assigned Position Requirements: Previous 3-4 Axis CNC Milling Machine experience; minimum 3 years operator and 1 year ability to perform machine set-up. Ability to read blueprints Advanced understanding of G Code programs Advanced understanding of Geometry Strong mechanical aptitude Excellent problem solving skills High school graduate or equivalent, technical training on machining preferred Ability to communicate - verbal and written Ability to perform basic math functions with accuracy Basic computer skills for data entry purposes. Experience of ERP system (preferred) Manufacturing experience (preferred) Dependable and prompt Efficient work habits Physical Requirements/Working Conditions: Ability to lift 20-50 lbs. frequently Ability to lift up to 70 lbs. occasionally Continuous standing Use of hands and feet to handle, control, or feel objects, tools, controls, press buttons, levers and pedals Bending, twisting and reaching Occasional repetitive movement Frequent walking Wear personal protective equipment such as safety glasses, ear protection, safety shoes, gloves and any other protective equipment deemed necessary. Work indoors in non-controlled environmental conditions Exposure to sounds and noise levels that can be distracting or uncomfortable Exposure to minor cuts or burns Exposure to contaminants Exposure to hazardous equipment Work with others in a group or team Works safely around manufacturing equipment Schedule: Mon-Fri 7 am - 3:30 pm 8-hour shift Possibility of overtime when required In person

Full-time Description Leitner-Poma of America, Inc. is seeking a dedicated CNC Machinist I to expertly operate a Toyoda mill with Fanuc controller, producing intricate machined parts while upholding quality and safety standards. This role will set up and maintain precision machine tools, interpret complex engineering drawings, and ensure the accuracy of finished products using advanced measuring instruments. The position will also troubleshoot machine malfunctions and ensure we maintain our commitment to excellence in manufacturing. This is a full-time, hourly position hiring at $19.00-$24.00 per hour based on relevant experience & certifications. This position will be accepting applications until February 13th, 2026, at which time the posting will close, and the hiring team will review the list of applicants. BENEFITS In addition to your compensation, Leitner-Poma is proud to offer our employees the following benefits: Comprehensive health care plans with 100% company-paid options 401k with company matching after one year of employment Annual Bonus based on company performance Paid Personal Time which grows based with your tenure 10 Paid Holidays per year And more! ABOUT LEITNER-POMA OF AMERICA, INC. Leitner-Poma specializes in designing, engineering, manufacturing, and maintaining innovative cable transport systems spanning from the tallest mountains to the busiest city centers. Our innovative systems keep people moving, no matter the location or the conditions. From coast to coast, Leitner-Poma is revolutionizing transportation across North America! Requirements Basic Qualifications High school diploma/GED equivalent. At least 1-2 years' machine shop experience. Must be at least 18 years of age. Authorized to work in the United States of America. Proficient in the English language. Desired Qualifications Previous experience in CNC programming & set-up/associates degree in machine school technologies. Previous operations & maintenance experience with a Toyoda mill and/or Fanuc controller. Equal Employment Opportunity Policy Leitner-Poma of America, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Salary Description $19.00-$24.00/ per hour

Job Description CNC Machinist ???? Work Hours: 3:00 PM to 1:30 AM, Monday through Thursday ???? Competitive Compensation + 12.5% Shift Premium Make the Right Connection-Build Your Career with Dixon! Bearon Manufacturing, an affiliate of The Dixon Group is seeking a skilled CNC Machinist to join our dedicated team in Landisville, PA! In this hands-on role, you'll be responsible for setting up, operating, and maintaining CNC machinery to produce high-quality parts to exact specifications. If you have a strong mechanical background, shop training in machining and metal properties, and enjoy taking ownership of your work, this is a great opportunity to advance your career in a supportive and innovative environment. About Us: The Dixon Group is a global, family-owned manufacturing company with a history of over 100 years of operation in the U.S.A. Based in Chestertown, Maryland, with distribution centers located worldwide. The company has a diverse workforce and a strong values-based culture. As an innovator in the hose coupling industry, our mission is to provide real solutions for our customers while fostering a supportive and collaborative work environment. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. ???? What You'll Do: Set up, operate, and fine-tune CNC machines to manufacture precision components (metal + plastic) Run multi-axis programs for milling, drilling, threading, reaming, and profiling Interpret blueprints and work instructions with accuracy and attention to detail Perform part inspections using precision measurement tools (micrometers, calipers, gauges) Collaborate with other machinists and engineers to improve processes and efficiency Maintain a clean, safe work environment with a focus on quality and consistency ???? What We're Looking For: High School Diploma or equivalent required 5+ years of CNC machining and setup experience Solid background in metal manufacturing Comfortable reading blueprints and using calipers, micrometers, and other QC tools Good with shop math and basic CNC programming edits Reliable, team-oriented, and always looking to improve Able to lift 50 lbs and stand for extended periods of time ???? What We Offer: Medical, dental, and vision insurance for you and your family Competitive salary Bonus programs 401K retirement plan Training opportunities Tuition reimbursement Paid vacation, PTO, and holidays Gym reimbursements, and more! Join us and be a part of a team that values your contributions and supports your goals! The Dixon Group is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices and laws. Accordingly, to the fullest extent required by applicable law, The Dixon Group strictly prohibits and does not tolerate discrimination against employees, applicants, or any other covered persons. The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Please contact us at ************** or ***************** if you need help to participate fully in the application process.