Safety Analyst jobs at Booz Allen Hamilton

Immediate need for a talented Safety Coordinator. This is a 03 months contract opportunity with long-term potential and is located in Torrance, CA (Hybrid). Please review the job description below and contact me ASAP if you are interested. Job ID:25-93542 Pay Range: $85 - $95/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: Leads daily safety meetings Verifies all turnaround safety processes have been fully implemented Verify receipt and quality of training documentation received e.g., forklift certification Follows up to ensure correct actions have been implemented for any incidents and near-miss reporting. Ensures that federal, provincial, and local laws, regulations, rules, and codes are observed by contractors. Assist, with plan to implement move in/out contractor safety training for employee orientation programs. Identify and evaluate hazardous conditions and practices in the client's workplace during on-site inspections to audit physical conditions and safe work practices. Participate in the safety observation program, submit feedback, and assure documents are begin submitted and tracked accordingly. Provide advice and counseling for all compliance regulations. Compile, analyze, and interpret incident report data to develop corrective actions to eliminate risk. Assure compliance to company safety policy handbook and site-specific policies. Participate in safety walks & audits, provide positive correction advice to employees working at risk. Uphold and communicate high standards of housekeeping in assigned areas and on all job sites. Conduct frequent formal housekeeping inspections of plant areas. Willing to work a wide variety of scheduled days and hours, following strict fatigue management guidelines. Works professionally and harmoniously with co-workers, supervisors, management, support personnel, program participants, and business-related persons. Utilizes positive and constructive attitude toward resolution of problems and conflicts. Accepts direction, criticism, and supervision. Demonstrates ability to remain calm in demanding situations. Ability to work within and promote a teamwork philosophy. Makes good use of time, completing assigned tasks in a timely manner. Key Requirements and Technology Experience: Key Skills; Safety CAL OSHA Regulations MSHA Refinery Strong organizational, interpersonal and planning skills. Strong leadership abilities. Demonstrates strong follow up skills Ability to juggle multiple projects simultaneously. Ability to accurately perform other duties as assigned. Understands safety standards as outlined by client and Chemicals, Inc. 10 years of experience in Safety Coordinator role in refinery or petrochemical industry Degree in health and safety related discipline and /or hold current CSP preferred Subject matter expertise in understanding regulatory policies from OSHA, MSHA, NFPA, NEC, CGA, Alberta OHS Demonstrated expertise and commitment in applying Corporate safety policies and procedures Demonstrated experience in site auditing, assessment, and coaching Good interpersonal, communication, training, and influence skills Motivated Positive Safety Attitude Demonstrated leadership skills Good organizational and project management skills. Training and experience in incident investigation Microsoft Office Suite proficiency (Word, Excel, Power point) Our client is a leading Gas and Chemicals Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Description JOB DESCRIPTION/SUMMARY The Site Safety and Health Officer (SSHO) will conduct required site and safety analysis, observations and prepare and implement health and safety plans for environmental and engineering projects. DUTIES AND RESPONSIBILITIES Primary duties and responsibilities include (but not limited to) Prepare and implement health and safety plans for environmental and engineering projects. Act as onsite safety representative for the duration of a given contract. Serve as the SSHO person of contact to conduct the required site and safety analysis and observations. Evaluate results and make recommendations as necessary for maintaining compliance with regulatory agencies. Conduct daily safety and health inspections and maintain a written log which includes area/operation inspected, date of inspection, identified hazards, recommended corrective actions, estimated and actual dates of corrections. Conduct weekly or daily tailgate safety meetings. Attach safety inspection logs to the contractors' daily quality control report. Conduct mishap investigations and complete required reports. Investigate and resolve health and safety deficiencies. Must have extensive experience in the field or in a related area. Must be familiar with standard concepts, practices, and procedures within the environmental and safety compliance fields. Must be able to accurately establish and keep paper and electronic records concerning equipment, funds, supplies, and other property record information. Good oral and written communication skills, reading/writing/grammar proficiency, good analytical ability, self-motivated, experienced problem solver, and moderate stress tolerance. MINIMUM QUALIFICATIONS, SKILLS, AND EDUCATIONAL REQUIREMENTS The SSHO will have a minimum of five years of relevant experience in overseeing health and safety operations in conjunction with environmental investigation and remediation projects. The SSHO will also be OSHA, CHST and HAZWOPER trained and certified. The SSHO is required to have a minimum of 5 years of construction industry safety experience on similar projects Familiarity with requirements of USACE EM 385-1-1 SSHO shall have Construction Health & Safety Technician (CHST) certification 30-hour OSHA construction safety class within the last 5 years 40-hour HAZWOPER Certification An average of at least 24 hours of formal safety training each year for the past 5 years Must be a United States Citizen and able to pass DOD security checks Completed the USACE EM 385-1-1 40 hour course within the last 2 years Current CPR/First-Aid certification Competent person training as needed Safety Trained Supervisor (STS) certification from the Board of Certified Safety Professionals preferred Bachelor's Degree preferred We are committed to a merit-based hiring process that values individual skills, qualifications, and performance. Our hiring practices comply with all applicable federal, state, and executive orders, including the recent Executive Order on Equal Opportunity Hiring.

Job Description Job Title: Construction Safety Program Manager Location: Boulder CO. This role is not a remote position and will be working on the construction site. Compli, LLC was founded in 2001 to provide Commissioning, Validation and Regulatory Support Services to the Life Sciences industry. We serve pharmaceutical companies across the United States, offering a vast array of services that assist companies with exceeding their goals and objectives. In today's world, it's never been more important to understand regulations and quality assurance activities as they relate to operations, vendors, engineering, construction and contractors. In 2020, Compli, LLC became a wholly owned subsidiary of George Butler Associates, Inc. This acquisition allowed Compli, LLC to become part of an integrated network of services where clients have more options to engage an impressive suite of in-house services. Compli is full services Commissioning, Qualification, Regulatory Compliance and On Demand services firm. Summary: The Safety Field Representative (CFR) will serve as the Safety Program team's in the field representative during construction operations for all capital projects at the manufacturing site. This role is responsible for auditing and monitoring all construction work to ensure compliance with established safety programs and procedural requirements. Supervisory Responsibilities: None Essential Functions: Understand and ensure adherence to all expected safety processes and procedures related to construction and site operations. Engage directly in the field with construction and operations teams to enforce compliance with safety programs, including: Lockout/Tagout (LOTO) Hot Work Permitting Fall Protection Confined Space Entry Safe Job Planning and Execution Etc… Mentor and coach field personnel on safe work practices in alignment with safety programs and industry best practices. Identify and correct unsafe conditions or behaviors observed in the field. Escalate safety issues and report unsafe practices through proper channels. Collaborate with site and project personnel to investigate safety incidents. Actively participate in safety improvement initiatives and continuous improvement efforts. Other duties as assigned. Education & Experience Experience working on large-scale CAPEX industrial projects across various disciplines (e.g., heavy civil, structural, mechanical, electrical). Familiarity with process equipment and commissioning activities. 5-years of experience preferred in safety-related roles, including oversight or management of safety programs. Safety certifications or formal safety training are preferred (e.g., OSHA 30, CSP, CHST, or equivalent). Physical Requirements: Working at a variety of heights Climbing stairs and ladders Bending Stooping Working outdoors in a broad range of climate conditions Working around construction machinery Travel: Working on site in Boulder, CO. Salary: $50,000 - $85,000 per year depending on experience level.

Job Description Job Title: Construction Safety Program Manager Location: Boulder CO. This role is not a remote position and will be working on the construction site. Compli, LLC was founded in 2001 to provide Commissioning, Validation and Regulatory Support Services to the Life Sciences industry. We serve pharmaceutical companies across the United States, offering a vast array of services that assist companies with exceeding their goals and objectives. In today's world, it's never been more important to understand regulations and quality assurance activities as they relate to operations, vendors, engineering, construction and contractors. In 2020, Compli, LLC became a wholly owned subsidiary of George Butler Associates, Inc. This acquisition allowed Compli, LLC to become part of an integrated network of services where clients have more options to engage an impressive suite of in-house services. Compli is full services Commissioning, Qualification, Regulatory Compliance and On Demand services firm. Summary: The Safety Field Representative (CFR) will serve as the Safety Program team's in the field representative during construction operations for all capital projects at the manufacturing site. This role is responsible for auditing and monitoring all construction work to ensure compliance with established safety programs and procedural requirements. Supervisory Responsibilities: None Essential Functions: Understand and ensure adherence to all expected safety processes and procedures related to construction and site operations. Engage directly in the field with construction and operations teams to enforce compliance with safety programs, including: Lockout/Tagout (LOTO) Hot Work Permitting Fall Protection Confined Space Entry Safe Job Planning and Execution Etc… Mentor and coach field personnel on safe work practices in alignment with safety programs and industry best practices. Identify and correct unsafe conditions or behaviors observed in the field. Escalate safety issues and report unsafe practices through proper channels. Collaborate with site and project personnel to investigate safety incidents. Actively participate in safety improvement initiatives and continuous improvement efforts. Other duties as assigned. Education & Experience Experience working on large-scale CAPEX industrial projects across various disciplines (e.g., heavy civil, structural, mechanical, electrical). Familiarity with process equipment and commissioning activities. 5-years of experience preferred in safety-related roles, including oversight or management of safety programs. Safety certifications or formal safety training are preferred (e.g., OSHA 30, CSP, CHST, or equivalent). Physical Requirements: Working at a variety of heights Climbing stairs and ladders Bending Stooping Working outdoors in a broad range of climate conditions Working around construction machinery Travel: Working on site in Boulder, CO. Salary: $50,000 - $85,000 per year depending on experience level.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Site Safety and Health Officer (SSHO) is responsible for developing, implementing, and maintaining a safety program that aligns with regulatory systems, contract strategies and organizational policies and procedures. The purpose of the SSHO is to protect the people, the environment, property, financial and other company, and customer resources. The incumbent advises on changes and their implementation and provides training, tools, and techniques to enable others to achieve safe work practices and environments. The SSHO is accountable for partnering with department leaders to identify and train staff on behaviors and work-flows that mitigate and manage risk. This position is designed to establish and maintain a strong safety culture through awareness and commitment, while mitigating risk factors, for operations and maintenance; logistics and transportation; and all supporting contract departments. Salary Range: $117,000.00 - $127,000.00 Work Model: Onsite/In-Office Responsibilities Essential Duties & Job Functions: * Develop, implement, and maintain Accident Prevention Plans designed for ensuring compliance with contract requirements, governing regulatory authorities and company policies. * Acts as primary point of contact for all safety incidents; maintains accurate, organized, confidential case files. * Conducts meetings to investigate incidents, report on findings and recommend actions. * Acts as primary point of contact to advise, review and accept all contractor safety plans. * Ensure compliance with safety procedures through inspections, training and evaluations while keeping abreast of any changes to laws and regulations that impact the organization. * Ensures a high level of internal and external customer service. Investigates and establishes corrective actions for issues and complaints relating to safety and risk. * Executes data-driven programs and analyses that identify, measure, and monitor risk and safety exposures. Produce recommendations and implement strategies. * Leads preparation and participation in compliance audits; ensures ongoing compliance with processes, policies, record keeping, reporting, etc. * Effectively and actively utilizes online safety records management database to manage incident, near miss and training records. * Executes data-driven programs and analyses that identify, measure, and monitor risk and safety exposures. * Efficiently and effectively coordinates multiple tasks and/or projects simultaneously. * Provides clear and decisive written and oral communication. * Maintains a high degree of professionalism and works well with all levels of the organization. * Operates Chugach-owned motor vehicles. * Adheres to established company safety personnel and standard operating procedures and policies. * Performs other duties as assigned. Job Requirements Mandatory: * Ten (10)+ years of progressive experience with similar site. * Five (5) years of relevant experience, in addition to holding a CSP (Certified Safety Professional) certification or a degree in Safety and Health. * OSHA 30 Certification (Construction or General Industry). * Current EM 385-1-1 (40) hour Certificate or obtain the certificate in first 90 days of employment * Demonstrated experience in the following: o Drafting safety policies, procedures and/or training documents. o Investigations, root cause analyses, and corrective actions. o Risk considerations associated with safety plans, work activities, and equipment usage. * Use of operational metrics to measure a variety of safety stats and/or cost performance. * Basic project/task management skills. * Safety Management Software experience. * Good working skills in the use of Microsoft Office Suite Programs, particularly Word and Excel. * Excellent written and oral communication skills. * Mature judgment and ability to work with minimal supervision. * Medically and physically able to wear a respirator. * Ability to lift 50 pounds. * U.S. Citizenship. * Valid state independent driver's license with a suitable driving record. * Ability to pass pre-hire background and drug screen. * Ability to obtain base access (DBIDS) * Up to 10% travel with the possibility of international travel for high level investigations. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Site Safety and Health Officer is responsible for developing, implementing, and maintaining a safety program that aligns with regulatory systems, contract strategies and organizational policies and procedures. The purpose of the SSHO is to protect the people, the environment, property, financial and other company, and customer resources. The incumbent advises on changes and their implementation and provides training, tools, and techniques to enable others to achieve safe work practices and environments. The SSHO is accountable for partnering with department leaders to identify and train staff on behaviors and workflows that mitigate and manage risk. This position is designed to establish and maintain a strong safety culture through awareness and commitment, while mitigating risk factors, for operations and maintenance; logistics and transportation; and all supporting contract departments. Salary Range: $117,000.00 - $127,000.00 This position is contingent upon contract award. Work Model: Onsite/In-Office Responsibilities Essential Duties & Job Functions: * Develop, implement, and maintain Accident Prevention Plans designed for ensuring compliance with contract requirements, governing regulatory authorities and company policies. * Acts as primary point of contact for all safety incidents; maintains accurate, organized, confidential case files. * Conducts meetings to investigate incidents, report on findings and recommend actions. * Acts as primary point of contact to advise, review and accept all contractor safety plans. * Ensure compliance with safety procedures through inspections, training and evaluations while keeping abreast of any changes to laws and regulations that impact the organization. * Ensures a high level of internal and external customer service. Investigates and establishes corrective actions for issues and complaints relating to safety and risk. * Engage in frequent communication and coordination between internal staff, Human Resources, Project Management, Insurance Carriers, and Health Care Providers. * Executes data-driven programs and analyses that identify, measure, and monitor risk and safety exposures. Produce recommendations and implement strategies. * Leads preparation and participation in compliance audits; ensures ongoing compliance with processes, policies, recordkeeping, reporting, etc. * Effectively and actively utilizes online safety records management database to manage incident, near miss and training records. * Executes data-driven programs and analyses that identify, measure, and monitor risk and safety exposures. * Efficiently and effectively coordinates multiple tasks and/or projects simultaneously. * Provides clear and decisive written and oral communication. * Maintains a high degree of professionalism and works well with all levels of the organization. * Operates Government and Chugach-owned motor vehicles. * Adheres to established company safety personnel and standard operating procedures and policies. * Performs other duties as assigned. Job Requirements Mandatory: * Five (5)+ years of progressive experience with similar site EHS programs or; * Three (3) years of relevant experience, in addition to holding a CSP (Certified Safety Professional) certification or a degree in Safety and Health. * OSHA 30 Certification (Construction or General Industry). * Current EM 385-1-1 (40) hour Certificate or obtain the certificate in first 90 days of employment * Demonstrated experience in the following: * Drafting safety policies, procedures and/or training documents. * Investigations, root cause analyses, and corrective actions. * Risk considerations associated with safety plans, work activities, and equipment usage. * Use of operational metrics to measure a variety of safety stats and/or cost performance. * Basic project/task management skills. * Safety Management Software experience. * Good working skills in the use of Microsoft Office Suite Programs, particularly Word and Excel. * Excellent written and oral communication skills. * Mature judgment and ability to work with minimal supervision. * Medically and physically able to wear a respirator. * Ability to lift 50 pounds. * U.S. Citizenship. * Valid state independent driver's license with a suitable driving record. * Ability to pass pre-hire background and drug screen. * Ability to obtain and maintain an intelligence agency level clearance. * Up to 10% travel with the possibility of international travel for high level investigations. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

We believe that by equipping researchers with rapid insights and providers with tailored, on-demand data, we can help people lead better, healthier lives. At Digital Infuzion, we harness innovative healthcare solutions and cutting-edge bioinformatics to make meaningful impacts in patient care. Our team thrives in a creative, open, and growth-oriented environment, guided by our core values: Outcomes First: Focusing on what matters most and making timely, informed decisions. Innovative: Embracing creativity and continuous improvement to drive novel solutions. Radical Candor: Communicating openly and honestly, balancing direct feedback with genuine care. Never Satisfied: Pursuing excellence and continuous growth beyond the status quo. Resilient: Adapting and persevering through challenges, turning obstacles into opportunities. If you're passionate about leveraging technology to improve healthcare and want to work in an environment that values innovation and collaboration, we may have just the opportunity for you. Position Overview This position reports directly to the Safety Committee Lead and is integral to executing the vision for operational excellence, and continuous improvement in Data Safety Monitoring Board (DSMB) management and operational processes. We are seeking a Safety Committee Specialist with strong interest in and experience managing all aspects of DSMB management, The SCS must have documented experience in coordinating and moderating DSMB meetings and management of study documents and related processes. Prior experience in clinical research, Phases 1-IV is required. This role will play a critical part in both ensuring regulatory alignment and overseeing the coordination and logistics needed to support DSMB operations for 30 DSMBs within an electronic management system. This position is ideal for someone who enjoys building structure, thrives in fast-paced environments, and takes pride in ensuring no detail is overlooked in the service of patient safety and clinical research quality. Key Responsibilities Regulatory & Compliance Execution Assist in the implementation of DSMB-related Standard Operating Procedures (SOPs) and Working Practice Guidelines in accordance with GCP, FDA, EMA, ICH, and NIH standards. Maintain and manage accurate documentation for DSMB charters, rosters, COI forms, DSMB summaries/meeting minutes, and regulatory correspondence. Support audits and quality checks related to DSMB activity and compliance status. Coordination & Logistics Support Lead or support meeting logistics, including agenda coordination, calendar invites, and material distribution for both open/blinded and closed/unblinded data reports Track action items, meeting outcomes, and follow-up requests to ensure timely resolution. Coordinate onboarding and conflict-of-interest (COI) documentation for DSMB members and serve as a key point of contact for meeting logistics. Maintain detailed timelines, checklists, and communications to ensure seamless execution of DSMB operations. Support management of DSMB payment processing and contract documentation tracking, where applicable. (This is not currently a function of the SCS role. Operational Support Maintain meticulous, system-driven records in the electronic DSMB management system (SharePoint and CROMS), ensuring traceability, version control, and real-time visibility of safety committee operations. Prepare routine reports for internal and external stakeholders on DSMB progress, meeting schedules, member status, and compliance metrics. Provide administrative support to ensure proper version control and document storage. Identify risks and opportunities related to safety committee operations. Work with the Safety Committee Lead to identify opportunities to reduce manual burden through automation and workflow optimization. Translate strategic automation and efficiency goals into operational workflows, piloting improvements that reduce administrative burden and enhance accuracy. Act as a tactical liaison between the Safety Committee Lead and study teams, ensuring that logistics and documentation directly support leadership priorities and regulatory timelines. Proactively manage timelines, refine documentation workflows, and flag risks or process gaps to leadership. Collaboration & Communication Interface with DSMB Chairs, members, study teams, government clients, and internal staff to align logistics, timelines, and expectations. Ability to work in a matrix team environment and across departments/divisions. Ability to partner with DSMB support staff, including Safety Committee Administrators (SCAs). Respond to inquiries related to DSMB coordination, SOPs, and documentation requirements. Training & Documentation Assist in the development of user-friendly training materials, guidance documents, and process maps. Participate in team training efforts and contribute to onboarding new team members to DSMB workflows and logistics. What You Will Bring to the Role Strong sense of ownership, responsibility, and teamwork. Proven ability to manage complex timelines, coordinate logistics, and align multiple stakeholders to deliver critical safety committee milestones with precision and efficiency. Working knowledge of regulatory frameworks including GCP, FDA, and ICH, paired with the adaptability to stay current and compliant in a constantly evolving environment. Exceptional organizational and communication skills, embracing radical candor to proactively identify issues, surface insights, and foster trust across diverse teams. Proficiency with Microsoft Office Suite and familiarity with digital project management or document-control systems, with a willingness to explore smarter, faster ways to work. A resilient, team-first approach fueled by curiosity and a drive to continually improve processes in service of advancing clinical research and patient safety. Quickly adopt and optimize new tools and technologies, contributing to a data-driven, automation-enhanced approach to DSMB oversight. Process-oriented with an eye for efficiency, consistently identifying and implementing improvements, including opportunities for automation. Your Experience Bachelor's degree in life sciences, biotechnology, medical science, or a related field (or equivalent experience). 5+ years of clinical research and/or clinical trial monitoring experience and regulatory-related processes (experience managing DSMBs is required). Knowledge, Skills and Abilities Proven success working in multidisciplinary teams related to clinical research initiatives, specifically DSMBs. Basic understanding of clinical research, GCP, ICH, and related regulatory guidances. Strong communication skills, with the ability to engage confidently with senior stakeholders. Proven technical and/or medical writing experience, including drafting DSMB summaries, and editing SOPs and guidance documents. Meticulous attention to detail and a commitment to compliance and quality. Excellent time management, critical thinking, andprioritization of tasks skill sets. Ability to interpret and understand medical terminology and handle sensitive and confidential information appropriately. Comfort using Microsoft Office Suite, Adobe Acrobat (or equivalent), and electronic project- or document-management systems. Possess DIFZ core values: Outcomes First, Never Satisfied, Innovation, Radical Candor, and Resilience Digital Infuzion does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor per Federal laws. We can provide reasonable accommodation to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please contact Human Resources at **********************. The decision on granting reasonable accommodation will be made on a case-by-case basis.

Job Description Edwards, Inc. is a full-service industrial general contractor providing construction, fabrication, and crane services. We are currently seeking a Field Safety Representative. The Field Safety Representative conducts all work in accordance with company policies, procedures, and programs. The Field Safety Representative reports directly to the Field Safety Manager under the authority of the Safety Director of Edwards, Inc. Support Safety Director and Field Safety Manager with enforcement of safety practices Supervise safety of Field, Crane, and Fabrication Safety activities Perform routine job site and shop safety audits Prepare Job Hazard Analysis on upcoming jobs Develop site safety plans to comply with federal, state, and local regulations Conducts new hire and annual OSHA training Serves as a competent person for scaffolding, excavation, rigging, and crane projects, as necessary Extended periods of walking, sitting, driving, and climbing apply. May require working overtime, weekends, and nights. Ability to work outdoors in all weather conditions. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, and annual MVR reviews. Work Conditions Work week- The normal work week will be Monday through Thursday, 7:00 a.m. through 5:30 p.m. with occasional overtime or whatever time commitment is required that week to fulfill your duties. Weekend, night work or travel may be required. Follow all rules, protocols and procedures as set forth by the Company, which may be in the form of handbooks, directives, memorandum, meetings, or other means as deemed appropriate by the Company. Monitor and enforce current regulatory standards and company safety guidelines. Employees should always present themselves in professional manner. Always maintain professionalism. Support all company Divisions in a positive fashion. Keep a daily log of all your pertinent activities. A daily log will be provided if you do not already use one. Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Preferred: OSHA 30 OSHA 510 OSHA 500 CPR First Aid Bi-Lingual Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made online or in person at 4119 Sheep Pasture Road, Spring Hope NC 27882. Schedule: 10 hour shift Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

APPLICANTS MUST PROVIDE COPIES OF TRAINING/CERTIFICATION UPON INITIAL APPLICATION, OR THE APPLICATION WILL BE CONSIDERED INCOMPLETE AND WILL NOT MOVE FORWARD IN THE SELECTION PROCESS. For best results, if you are applying through an external job board like Indeed, please instead apply directly through the TDX website at *********************************** Resumes: all applicants' resumes shall include complete duration dates of employment (MM/YYYY, at minimum), including any period(s) of nonemployment, with explanations provided for any gaps - such as time spent searching for employment, military leave, etc. An outstanding opportunity, located in Georgia, for growth with an established general contractor looking for result driven individuals to grow with the company. Sand Point Services, LLC is an innovative General Contractor providing a wide range of construction services to government and commercial customers. At SPS, we take pride in partnering with our customers and industry partners to deliver projects that meet or exceed customer expectations. For more information, visit our website at: ******************** Summary Oversight of the continual improvement of the project health and safety program, systems, and processes that meet or exceed the company/project objectives. The Site Safety and Health Officer will be responsible for ensuring the appropriate policies, practices and strategies are defined and enforced in accordance with local and government regulations and are followed at the project site. Investigate safety and health incidents and complaints. Evaluate the impact of contractual requirements, emerging issues, regulations, and legislation to operations. The Site Safety and Health Officer serves as the program expert and promotes overall compliance with applicable regulations and guidelines, including communicating technical expertise. The position requires strong team management, leadership, clear communication, and the ability to develop solid inter-departmental relationships. Essential Duties and Responsibilities Ongoing administration of the on-site Health & Safety program that insures a safe and compliant work environment. Formulate, create, and maintain site/contract safety plans specific to projects and/or contracts when necessary or required. Performs new-hire orientation and training. Ensure proper employee, company, and subcontractor certifications are obtained and maintained. Communicate, educate, and train employees in safety awareness and specific safety requirements according to OSHA and EM385-1-1. Ensure that all employees have received the required training on the hazards specific to their position and documents such training in a manner that demonstrates the employee understands. Make sure all personnel and subcontractors are trained and certified (when required) and are up to date on various internal safety programs/activities. Conduct daily safety and health inspections and maintain a written log. Conduct mishap investigations and complete required reports. Maintain the OSHA Form 300 and Daily Production reports for prime and sub-contractors. Maintain applicable safety reference material on the job site. Attend pre-work meetings including preparatory inspection meetings, and periodic in-progress meetings. Implement and enforce accepted APP's and AHA's. Maintain a safety and health deficiency tracking system that monitors outstanding deficiencies until resolution. Ensure sub-contractor compliance with safety and health requirements. Facilitate accident prevention activities in compliance with OSHA and EM385-1-1 regulations or guidelines. Performs timely investigations of workplace accidents, injuries, illnesses, and near-misses, identification of root cause and rapid correction of contributing factors with documented closure. Accurately report accidents and illness within reporting timelines. Report recordable injuries in a timely manner. Monitors all follow up treatment of injured workers and assists with the development of modified duty positions, as appropriate, to minimize the cost of worker's compensation claims. Create and maintain Activity Hazard Analysis, evaluate hazards within the job site for safety and health risks and develop hazard control practices and programs. Recognize a variety of issues, problems or opportunities and determine whether action is needed; identify the need for and collect information to better understand issues, problems, and opportunities Integrate information from a variety of sources; detect general trends, associations and cause-effect relationships. Consult with industry professionals to stay current of trends and issues. Performs other duties as assigned. Minimum Qualifications *30-hour OSHA “Card” Construction or General Industry; *Five (5) years of “continuous” general industry or construction “safety” experience in supervising/managing safety programs and processes, or conducting hazard analyses and developing controls; OR, Four (4) years with Third-Party, Nationally Accredited SOH-related certification; *Minimum 8-hours of formal Safety training for each of the past five (5) years (2020 through 2025) - training certificates must contain your name, date of completion, course name, and course duration to be accepted. Otherwise, 0.25 hours or no credit may be assigned.) *Current CPR/First Aid certification; 40-hour EM385-1-1 U.S. Army Corps of Engineers Safety regulations (EM385-1-1) training; Ability to apply working knowledge of federal and state regulations to determine compliance within program area(s); Proficient with Microsoft Office (Word, Excel, PowerPoint, Outlook); A valid driver's license; and Ability to pass a security clearance/background check. *APPLICANTS MUST PROVIDE COPIES OF TRAINING/CERTIFICATION UPON INITIAL APPLICATION, OR THE APPLICATION WILL BE CONSIDERED INCOMPLETE AND WILL NOT MOVE FORWARD IN THE SELECTION PROCESS. For best results, if you are applying through an external job board like Indeed, please instead apply directly through the TDX website at *********************************** Resumes: all applicants' resumes shall include complete duration dates of employment (MM/YYYY, at minimum), including any period(s) of nonemployment, with explanations provided for any gaps - such as time spent searching for employment, military leave, etc. Working Conditions and Physical Requirements The physical demands associated with the duties and responsibilities described herein are representative of those that must be met by an employee to successfully perform this job. This includes ability to spend extended hours walking construction sites. Competencies To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position. Good interpersonal relationships skills that support coaching/teaching opportunities by seeking and giving information and checking for understanding. Strong investigation and analytical skills. Superior, organizational and time management skills. Ability to multi-task and quickly adapt to changing priorities. Excellent oral and written communication skills, initiative and a commitment to Safety. Ability to explore, simplify processes and challenge the sites to think and work strategically for success. High level of integrity, strong work ethic, good judgment and problem-solving skills. Strong team player with a people-centered leadership style. Strong attention to detail and ability to meet deadlines. Strong persuasive skills and the ability to interact effectively with all levels of employees. Note: This job description in no way states or implies that these are the only duties to be performed by this employee. This employee will be required to follow any other instructions and to perform any other duties requested by their supervisor. The statements herein intended to describe the general nature and level of work being performed by the employee in this position. These statements are not to be construed as an exhaustive list of responsibilities, duties, and skills required of a person in this position. Furthermore, these statements do not establish a contract for employment and are subject to change at the discretion of Tanadgusix Corporation (TDX) and its subsidiaries. Equal Opportunity Employer/Shareholder Preference Sand Point Services (SPS) is a subsidiary of TDX and is an Equal Employment Opportunity and Affirmative Action (EEO/AA) employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability STATUS, veteran protected status or any other characteristic protected by applicable law. Native Preference applies pursuant to P.L. 93-638, and SPS grants employment preference to shareholders of Tanadgusix Corporation and their spouses and descendants to the extent allowed by law. Prior to employment, successful completion of a background investigation and a pre-employment drug screen may be required. Accommodation Request If you are a job seeker with a disability and require accessibility assistance or an accommodation to apply for one of our jobs, please submit a request by telephone or via email. In order to appropriately assist you with an accommodation, we ask that you please specify the assistance needed in order to access our jobsite and post for a position. The dedicated email and telephonic options are listed below and are reserved only for individuals with disabilities needing accessibility assistance. To request an accommodation by telephone, contact us at ************ or email us at **************. #ZR

Description JOB DESCRIPTION/SUMMARY The Site Safety and Health Officer (SSHO) will conduct required site and safety analysis, observations and prepare and implement health and safety plans for environmental and engineering projects.DUTIES AND RESPONSIBILITIES Primary duties and responsibilities include (but not limited to): Prepare and implement health and safety plans for environmental and engineering projects. Act as onsite safety representative for the duration of a given contract. Serve as the SSHO person of contact to conduct the required site and safety analysis and observations. Evaluate results and make recommendations as necessary for maintaining compliance with regulatory agencies. Conduct daily safety and health inspections and maintain a written log which includes area/operation inspected, date of inspection, identified hazards, recommended corrective actions, estimated and actual dates of corrections. Conduct weekly or daily tailgate safety meetings. Attach safety inspection logs to the contractors' daily quality control report. Conduct mishap investigations and complete required reports. Investigate and resolve health and safety deficiencies. Must have extensive experience in the field or in a related area. Must be familiar with standard concepts, practices, and procedures within the environmental and safety compliance fields. Must be able to accurately establish and keep paper and electronic records concerning equipment, funds, supplies, and other property record information. Good oral and written communication skills, reading/writing/grammar proficiency, good analytical ability, self-motivated, experienced problem solver, and moderate stress tolerance. MINIMUM QUALIFICATIONS, SKILLS, AND EDUCATIONAL REQUIREMENTS The SSHO will have a minimum of five years of relevant experience in overseeing health and safety operations in conjunction with environmental investigation and remediation projects. The SSHO will also be EM385 1-1, OSHA and CHST trained and certified. The SSHO is required to have a minimum of 5 years of construction industry safety experience on similar projects USACE EM 385-1-1 certification SSHO shall have Construction Health & Safety Technician (CHST) certification 30-hour OSHA construction safety class within the last 5 years 40-hour HAZWOPER Certification An average of at least 24 hours of formal safety training each year for the past 5 years Must be a United States Citizen and able to pass DOD security checks Completed the USACE EM 385-1-1 40 hour course within the last 2 years Current CPR/First-Aid certification Competent person training as needed CSP may be accepted in place of other certifications on a case-by-case basis Bachelor's Degree preferred We are committed to a merit-based hiring process that values individual skills, qualifications, and performance. Our hiring practices comply with all applicable federal, state, and executive orders, including the recent Executive Order on Equal Opportunity Hiring.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Incumbent prepares and enforces the safety program on the assigned contract. This position is responsible for managing, implementing and enforcing the safety and health program in accordance with the accepted Accident Prevention Plan (Safety and Health program). Work Model: Onsite/In-Office Responsibilities Essential Duties & Job Functions: * Manages supervisors, inspectors, and other project employees working in the HSE department. * Audits HSE programs and site conditions at all work sites. * Oversees incident investigations, and conducts investigations of incidents that could result in litigation. * Develops and presents recommendations, and advises all levels of management to ensure balance between productivity and the safety of team members, sub-contractors, and visitors. * Creates and establishes project HSE programs to address program gaps. * Maintains liaison with client representatives, company HSE personnel, and regulatory agencies. * Maintains liaison with owners' representatives, insurance carriers, the community, and corporate HSE group. * Supports workers' compensation interface. * Provides regulatory interface. * Produces and supports HSE education and training programs. * Represents Company in outside HSE organizations. * Advises, consults, guides, and assists sectors, divisions, regions, or corporate departments in HSE matters. * Initiates and maintains HSE awareness programs and fosters such programs to improve awareness. * Provides guidance to management through interpretation of HSE Practices and Procedures, legislation, and regulations. * Participates in monitoring and controlling HSE standards and applicable legislation and regulations. * Inspects, monitors, and evaluates HSE programs for value and effectiveness. * Establishes specifications for HSE and fire protection equipment. * Conducts scheduled safety and occupational health performance meetings with managers. * Maintains records, reports, and documents required to meet corporate and regulatory requirements. * Performs related work as assigned. Accountable For: * Keeping up to date and knowledgeable of all industry regulations and compliance requirements. * Using of common office equipment including, copiers, fax machines, and computers * Understanding client's business needs and responding to them without compromising the integrity or profitability of all parties * Communicating effectively orally and in writing, including the ability to make significant presentations to senior team and client management * Successfully completing all mandated training requirements per government and management directives * Timely and cost effective performance of duties. * Timely completion and accuracy of all departmental work. * Ensuring compliance with company safety regulations. * Dealing with a variety of people in a professional, courteous manner in diversified situations. * Adherence to established CGS, LLC safety policies and good industrial and office safety practices. * Compliance with CGS, LLC Standard Operating Procedures and Personnel policies and procedures. * Demonstrating skill in the use of MS Word and Excel at the intermediate or higher level. * Effectively coordinating a number of projects simultaneously. * Demonstrating the ability to work well under pressure. Job Requirements Mandatory: * High School Diploma or equivalent. * Five (5) years' experience preparing and enforcing safety programs on contracts of similar size and complexity * Completed the OSHA 30-hour construction safety class or equivalent within the last five years. * Completed an average of at least 24 hours of formal safety and health related coursework every four (4) years. * Current valid state issued driver's license with acceptable driving record. * Ability to successfully pass any background checks and/or drug testing required on the contract. * Ability to use Microsoft Office programs (Word, Excel, Power Point) at an intermediate level. Preferred: * Bachelor's Degree in Safety, Engineering (any field), Industrial Hygiene, Health Physics, Fire Prevention or other related scientific fields. * Certified Safety Professional (CSP). * Certified for lead abatement, asbestos abatement, confined space entry and respiratory protection. * Prior Military and/or Contingency Operations experience. * Construction experience or Utilities experience. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Safety Officer supports all the functions of a comprehensive environmental safety health and risk program; ensuring that the project is following all federal, state, and local safety regulations. This may involve inspections, filling out government paperwork, sampling wastes and materials, and monitoring tradesmen and contractors performing project activities in all assigned facilities. The Safety Officer ensures compliance with state and federal regulations/guidelines regarding occupational safety and health and chemical wastes. The incumbent will administer programs to ensure employee safety and customer compliance with safety, health and environmental regulations for specified facilities, operations and the visiting public. Additionally, the Safety Officer will conduct accident investigations. Pay Rate: $41.26/hourly Work Model: Onsite/In-Office Responsibilities Essential Duties & Job Functions: * Ensures compliance with safety procedures through inspections, training and evaluations. * Conducts safety training for all levels of the organization. * Assists frontline management in root cause investigations and preparation of reports. * Coordinates safety audits and inspections and coordinates specific audit/inspection processes. * Participates to develop site-specific safety procedures and new safety procedures. * Conducts air sampling and monitoring in areas as required and generates required reports. * Conducts Job Hazard Analysis programs (JHA, AHA, etc.) * Able to identify and evaluate safety issues and recommend corrective actions to be taken. * Monitors all hazardous and non-hazardous materials used by company to include, but not limited to: procurement, receiving, storage, use and disposal. * Acts as an integral member of the Spill Response Team. * Operates customer and company owned motor vehicles and/or other equipment. * Knowledgeable in applicable codes, standards and regulations including but not limited to EPA, MDE, OSHA, NFPA, and IBC. * Supports snow team and other department staff as needed or directed with a requirement of overtime and adjusted schedules. * Performs other duties as assigned. Job Requirements Mandatory: * High school graduate or equivalent GED. * At least three (5) years of equivalent job-related experience. * Possess relevant certifications to show progressive knowledge and growth in field. * Knowledgeable in applicable codes, standards and regulations including but not limited to EPA, MDE, OSHA, NFPA and IBC. * Medically and physically able and willing to wear a respirator. * Ability to deal with a variety of people in a professional, courteous manner in diversified situations. * Ability to perform assigned work tasks with minimal supervision. * Able to identify and evaluate safety issues and recommend corrective actions to be taken. * Ability to pass pre-hire background and drug screen. * U.S. Citizenship. * Ability to obtain and maintain the required intelligence community level clearance. * Valid driver's license with an acceptable driving record. * Ability to work overtime as needed. * Ability to lift 50 pounds independently and 75 pounds in a team lift. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

As an NRG employee, we encourage you to take charge of your career and development journey. We invite you to explore exciting opportunities across our businesses. You'll find that our dynamic work environment provides variety and challenge. Your growth is key to our ongoing success-take the lead in shaping your career development, goals and future! Job Summary: The Safety Specialist is responsible for implementing safety and health programs within the day-to-day station operations with a focus on employee engagement, culture, injury prevention and regulatory compliance. Essential Duties/Responsibilities: Influence and motivate others to work in a safe manner and communicate safety requirements during shift briefings, Job Briefings and planned scheduling meetings. Coordinate and implement compliance with OSHA and company safety standards. Implement the Company's Safety and Health Management program, and ensure compliance Designated Program Administrator for key Safety and Health programs. Coordinate with management of the facility on regulatory interpretation, timely internal and external reporting, and overall safety and health compliance. Conduct internal safety and health audits and incremental inspections of the facility to ensure compliance. Investigate accidents and incidents for root cause with a focus on identifying corrective actions to prevent a recurrence. Evaluate the effectiveness of safety programs, designs improvements, and works with management to implement identified improvements. Evaluate, develop, and assist with delivering training to improve skills in the safety aspects of employees' jobs. Working Conditions: Office environment and/or out doors Power Plant work environment including working at heights, high/low ambient temperatures and high humidity areas. Willingness to work outside normal business hours as necessary, to support operations, maintenance and outage activities. Requires occasional travel to other plant locations for meetings and safety support. Requires wearing personal protective safety equipment (respirators, safety glasses, hard hat, appropriate footwear, ear plugs, etc.). May be required to work around rotating and energized electrical equipment, hazardous materials and chemicals and heat producing equipment/environments. Requires operation of a personal computer. Minimum Requirements: High school diploma or GED A minimum of five years full time Safety experience in a comparable industrial environment. In lieu of five years Safety experience, ten years industry related experience with requisite safety responsibilities may be considered Certified Safety Professional, Occupational Health & Safety Technologist, or Certified Industrial Hygienist or preparing to become certified Must have valid state driver's license Preferred Qualifications: Previous power plant experience Bachelor's degree in Industrial Safety and Health or related discipline SGE (Special Government Employee) experience VPP (Voluntary Protection Program) champion Additional Knowledge, Skills and Abilities: Ability to work with minimum direct supervision. Strong working knowledge of regulatory requirements. Excellent oral and written communication skills. Understanding of OSHA's Electric Power Generation standard. Must possess functional computer skills specifically in Microsoft Office software. Ability to run a functional safety committee/sub-committee with agendas, meeting minutes, and a charter. Basic understanding of occupational health and industrial hygiene principles. Ability to interact effectively in a team environment and with individuals at all levels of the organization. Ability to compile, analyze, and interpret data. An understanding of the factors that influence human behavior. Ability to conduct incident analyses. Ability to prioritize tasks within a fast-paced dynamic environment. Physical Requirements (Demand and Frequency): Stand, walk, climb ladders, bend, kneel, crawl, pull/push and lift up to 25 pounds. Perform work both indoors and outdoors, occasionally in adverse conditions. Wear job related personal protective equipment (PPE). Occasionally work at heights and enter enclosed vessels or confined spaces. Please Note: Salary offered will be commensurate with the successful candidate's education and/or experience and consistent with the job location's market pay rate. NRG Energy is committed to a drug and alcohol-free workplace. To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing. EOE AA M/F/Vet/Disability. Level, Title and/or Salary may be adjusted based on the applicant's experience or skills. Official description on file with Talent.

From concept to design to execution, be part of the team that gets everyday products to people. Do you want to have an impact on creating products from today's top brands? Does having a company care about your career today and into the future motivate you? Does an environment where your opinions matter excite you? Are you a natural born tinkerer? If so, you have found your next calling! Grantek is a recognized leading provider of integrated automation, smart manufacturing and industrial information solutions in the global marketplace. Our clients are some of the worlds most respected Fortune 100 companies and recognized consumer brands: Mondelez, Brita, MolsonCoors, Coca-Cola, Kraft-Heinz, to name a few. We offer a competitive and comprehensive compensation package, retirement plan, company paid benefits, flexible work hours, and an education/career development program. For more information on what Grantek offers, visit: ********************************************************** We are committed to providing a positive and healthy corporate culture, one that empowers employees, promotes knowledge-sharing, and encourages strong friendships and social connections amongst all team members. We are a team of dedicated Engineers and Designers with an average of 7 years' tenure at Grantek. The vast majority of our employees have started off their careers at Grantek and have grown into successful senior team members who are integral to our client's manufacturing processes. Job Description Machine Safety Specialist - Sales Engineer at Grantek will serve as a Subject Matter Expert (SME) within the Practice group. This role involves a wide range of activities, including pre-sales, preliminary engineering assessments, machine risk assessments, proposal development, technical marketing, and sales engagements, and supporting the Delivery team. The Sales Engineer is responsible for Client Experience, Pricing, Marketing, and technical guidance on execution of Work. This role leads risk assessments, validates safety-related control systems, supports compliance to global standards (e.g., ISO 13849, IEC 62061, IEC 61508, ANSI B11.19), and partners closely with engineering, operations, and project teams to deliver safe and compliant solutions across the full system life cycle. Essential Duties: Create comprehensive Grantek proposals based on client win strategies. Assess pricing, identify potential risks, and craft winning proposals. Effectively present proposals to clients. Architect and present customer solutions and architectures to both technical and non-technical audiences. Translate complex technical concepts into clear and compelling presentations. Develop, maintain, and nurture relationships with key clients; understand their needs, provide guidance, and deliver tailored solutions. Collaborate with the Practice group (Smart Safety and Logistics) to make informed decisions and contribute to the group's direction and strategy development. Collaborate with our quality department to enforce quality and standards. Analyze and resolve problems, identify trends, and recommend improvements. Conduct client follow-ups, investigate for potential and upcoming work and observe for potential client needs. Execute machine safety assessments and/or consulting services for key clients. Collaboration: With Practice leaders and Delivery Managers, support all required sales activities. With Marketing Team, provide case studies to highlight industry and customer success. With Delivery Team, be aware of projects at customers in the Portfolio and drive their associated account strategies. With Engineering Team, work across the engineering department and be the subject matter experts to augment the proposal process. Participate in planning to achieve prescribed objectives. Engage, support & participate in company decisions, direction & strategy development. Qualifications Possesses at least one of the following: B.Sc. Engineering/Electrical Engineering, or Related Engineering Degree and/or Technology Diploma/Certification. TUV Rhineland or Nord certification a plus Have a minimum of 3-5 years experience in a team-based environment, account management, and sales functions. Strong knowledge of a sales process, and engineering design principles and processes relating to machine safety. Have been involved in Machine Safety facet of automation projects. Knowledge in project management, strategic pricing, and business strategy development. Strong mentorship and communication skills, with the ability to motivate and mentor the practice team. Customer-centric mindset and a focus on delivering an excellent client experience. Adaptable, organized, and results driven. Travel requirement 30-50% across North America Additional Information We are committed to the principle of equal employment opportunity for all employees and to provide Grantekians with a work environment free of discrimination and harassment. #INDHP

From concept to design to execution, be part of the team that gets everyday products to people. Do you want to have an impact on creating products from today's top brands? Does having a company care about your career today and into the future motivate you? Does an environment where your opinions matter excite you? Are you a natural born tinkerer? If so, you have found your next calling! Grantek is a recognized leading provider of integrated automation, smart manufacturing and industrial information solutions in the global marketplace. Our clients are some of the worlds most respected Fortune 100 companies and recognized consumer brands: Mondelez, Brita, MolsonCoors, Coca-Cola, Kraft-Heinz, to name a few. We offer a competitive and comprehensive compensation package, retirement plan, company paid benefits, flexible work hours, and an education/career development program. For more information on what Grantek offers, visit: ********************************************************** We are committed to providing a positive and healthy corporate culture, one that empowers employees, promotes knowledge-sharing, and encourages strong friendships and social connections amongst all team members. We are a team of dedicated Engineers and Designers with an average of 7 years' tenure at Grantek. The vast majority of our employees have started off their careers at Grantek and have grown into successful senior team members who are integral to our client's manufacturing processes. Job Description Machine Safety Specialist - Sales Engineer at Grantek will serve as a Subject Matter Expert (SME) within the Practice group. This role involves a wide range of activities, including pre-sales, preliminary engineering assessments, machine risk assessments, proposal development, technical marketing, and sales engagements, and supporting the Delivery team. The Sales Engineer is responsible for Client Experience, Pricing, Marketing, and technical guidance on execution of Work. This role leads risk assessments, validates safety-related control systems, supports compliance to global standards (e.g., ISO 13849, IEC 62061, IEC 61508, ANSI B11.19), and partners closely with engineering, operations, and project teams to deliver safe and compliant solutions across the full system life cycle. Essential Duties: Create comprehensive Grantek proposals based on client win strategies. Assess pricing, identify potential risks, and craft winning proposals. Effectively present proposals to clients. Architect and present customer solutions and architectures to both technical and non-technical audiences. Translate complex technical concepts into clear and compelling presentations. Develop, maintain, and nurture relationships with key clients; understand their needs, provide guidance, and deliver tailored solutions. Collaborate with the Practice group (Smart Safety and Logistics) to make informed decisions and contribute to the group's direction and strategy development. Collaborate with our quality department to enforce quality and standards. Analyze and resolve problems, identify trends, and recommend improvements. Conduct client follow-ups, investigate for potential and upcoming work and observe for potential client needs. Execute machine safety assessments and/or consulting services for key clients. Collaboration: With Practice leaders and Delivery Managers, support all required sales activities. With Marketing Team, provide case studies to highlight industry and customer success. With Delivery Team, be aware of projects at customers in the Portfolio and drive their associated account strategies. With Engineering Team, work across the engineering department and be the subject matter experts to augment the proposal process. Participate in planning to achieve prescribed objectives. Engage, support & participate in company decisions, direction & strategy development. Qualifications Possesses at least one of the following: B.Sc. Engineering/Electrical Engineering, or Related Engineering Degree and/or Technology Diploma/Certification. TUV Rhineland or Nord certification a plus Have a minimum of 3-5 years experience in a team-based environment, account management, and sales functions. Strong knowledge of a sales process, and engineering design principles and processes relating to machine safety. Have been involved in Machine Safety facet of automation projects. Knowledge in project management, strategic pricing, and business strategy development. Strong mentorship and communication skills, with the ability to motivate and mentor the practice team. Customer-centric mindset and a focus on delivering an excellent client experience. Adaptable, organized, and results driven. Travel requirement 30-50% across North America Additional Information We are committed to the principle of equal employment opportunity for all employees and to provide Grantekians with a work environment free of discrimination and harassment. #INDHP

From concept to design to execution, be part of the team that gets everyday products to people. Do you want to have an impact on creating products from today's top brands? Does having a company care about your career today and into the future motivate you? Does an environment where your opinions matter excite you? Are you a natural born tinkerer? If so, you have found your next calling! Grantek is a recognized leading provider of integrated automation, smart manufacturing and industrial information solutions in the global marketplace. Our clients are some of the worlds most respected Fortune 100 companies and recognized consumer brands: Mondelez, Brita, MolsonCoors, Coca-Cola, Kraft-Heinz, to name a few. We offer a competitive and comprehensive compensation package, retirement plan, company paid benefits, flexible work hours, and an education/career development program. For more information on what Grantek offers, visit: ********************************************************** We are committed to providing a positive and healthy corporate culture, one that empowers employees, promotes knowledge-sharing, and encourages strong friendships and social connections amongst all team members. We are a team of dedicated Engineers and Designers with an average of 7 years' tenure at Grantek. The vast majority of our employees have started off their careers at Grantek and have grown into successful senior team members who are integral to our client's manufacturing processes. Job Description Machine Safety Specialist - Sales Engineer at Grantek will serve as a Subject Matter Expert (SME) within the Practice group. This role involves a wide range of activities, including pre-sales, preliminary engineering assessments, machine risk assessments, proposal development, technical marketing, and sales engagements, and supporting the Delivery team. The Sales Engineer is responsible for Client Experience, Pricing, Marketing, and technical guidance on execution of Work. This role leads risk assessments, validates safety-related control systems, supports compliance to global standards (e.g., ISO 13849, IEC 62061, IEC 61508, ANSI B11.19), and partners closely with engineering, operations, and project teams to deliver safe and compliant solutions across the full system life cycle. Essential Duties: Create comprehensive Grantek proposals based on client win strategies. Assess pricing, identify potential risks, and craft winning proposals. Effectively present proposals to clients. Architect and present customer solutions and architectures to both technical and non-technical audiences. Translate complex technical concepts into clear and compelling presentations. Develop, maintain, and nurture relationships with key clients; understand their needs, provide guidance, and deliver tailored solutions. Collaborate with the Practice group (Smart Safety and Logistics) to make informed decisions and contribute to the group's direction and strategy development. Collaborate with our quality department to enforce quality and standards. Analyze and resolve problems, identify trends, and recommend improvements. Conduct client follow-ups, investigate for potential and upcoming work and observe for potential client needs. Execute machine safety assessments and/or consulting services for key clients. Collaboration: With Practice leaders and Delivery Managers, support all required sales activities. With Marketing Team, provide case studies to highlight industry and customer success. With Delivery Team, be aware of projects at customers in the Portfolio and drive their associated account strategies. With Engineering Team, work across the engineering department and be the subject matter experts to augment the proposal process. Participate in planning to achieve prescribed objectives. Engage, support & participate in company decisions, direction & strategy development. Qualifications Possesses at least one of the following: B.Sc. Engineering/Electrical Engineering, or Related Engineering Degree and/or Technology Diploma/Certification. TUV Rhineland or Nord certification a plus Have a minimum of 3-5 years experience in a team-based environment, account management, and sales functions. Strong knowledge of a sales process, and engineering design principles and processes relating to machine safety. Have been involved in Machine Safety facet of automation projects. Knowledge in project management, strategic pricing, and business strategy development. Strong mentorship and communication skills, with the ability to motivate and mentor the practice team. Customer-centric mindset and a focus on delivering an excellent client experience. Adaptable, organized, and results driven. Travel requirement 30-50% across North America Additional Information We are committed to the principle of equal employment opportunity for all employees and to provide Grantekians with a work environment free of discrimination and harassment. #INDHP

From concept to design to execution, be part of the team that gets everyday products to people. Do you want to have an impact on creating products from today's top brands? Does having a company care about your career today and into the future motivate you? Does an environment where your opinions matter excite you? Are you a natural born tinkerer? If so, you have found your next calling! Grantek is a recognized leading provider of integrated automation, smart manufacturing and industrial information solutions in the global marketplace. Our clients are some of the worlds most respected Fortune 100 companies and recognized consumer brands: Mondelez, Brita, MolsonCoors, Coca-Cola, Kraft-Heinz, to name a few. We offer a competitive and comprehensive compensation package, retirement plan, company paid benefits, flexible work hours, and an education/career development program. For more information on what Grantek offers, visit: ********************************************************** We are committed to providing a positive and healthy corporate culture, one that empowers employees, promotes knowledge-sharing, and encourages strong friendships and social connections amongst all team members. We are a team of dedicated Engineers and Designers with an average of 7 years' tenure at Grantek. The vast majority of our employees have started off their careers at Grantek and have grown into successful senior team members who are integral to our client's manufacturing processes. Job Description Machine Safety Specialist - Sales Engineer at Grantek will serve as a Subject Matter Expert (SME) within the Practice group. This role involves a wide range of activities, including pre-sales, preliminary engineering assessments, machine risk assessments, proposal development, technical marketing, and sales engagements, and supporting the Delivery team. The Sales Engineer is responsible for Client Experience, Pricing, Marketing, and technical guidance on execution of Work. This role leads risk assessments, validates safety-related control systems, supports compliance to global standards (e.g., ISO 13849, IEC 62061, IEC 61508, ANSI B11.19), and partners closely with engineering, operations, and project teams to deliver safe and compliant solutions across the full system life cycle. Essential Duties: Create comprehensive Grantek proposals based on client win strategies. Assess pricing, identify potential risks, and craft winning proposals. Effectively present proposals to clients. Architect and present customer solutions and architectures to both technical and non-technical audiences. Translate complex technical concepts into clear and compelling presentations. Develop, maintain, and nurture relationships with key clients; understand their needs, provide guidance, and deliver tailored solutions. Collaborate with the Practice group (Smart Safety and Logistics) to make informed decisions and contribute to the group's direction and strategy development. Collaborate with our quality department to enforce quality and standards. Analyze and resolve problems, identify trends, and recommend improvements. Conduct client follow-ups, investigate for potential and upcoming work and observe for potential client needs. Execute machine safety assessments and/or consulting services for key clients. Collaboration: With Practice leaders and Delivery Managers, support all required sales activities. With Marketing Team, provide case studies to highlight industry and customer success. With Delivery Team, be aware of projects at customers in the Portfolio and drive their associated account strategies. With Engineering Team, work across the engineering department and be the subject matter experts to augment the proposal process. Participate in planning to achieve prescribed objectives. Engage, support & participate in company decisions, direction & strategy development. Qualifications Possesses at least one of the following: B.Sc. Engineering/Electrical Engineering, or Related Engineering Degree and/or Technology Diploma/Certification. TUV Rhineland or Nord certification a plus Have a minimum of 3-5 years experience in a team-based environment, account management, and sales functions. Strong knowledge of a sales process, and engineering design principles and processes relating to machine safety. Have been involved in Machine Safety facet of automation projects. Knowledge in project management, strategic pricing, and business strategy development. Strong mentorship and communication skills, with the ability to motivate and mentor the practice team. Customer-centric mindset and a focus on delivering an excellent client experience. Adaptable, organized, and results driven. Travel requirement 30-50% across North America Additional Information We are committed to the principle of equal employment opportunity for all employees and to provide Grantekians with a work environment free of discrimination and harassment. #INDHP

Job Title: Safety Specialist Why consider a career at MLC? MLC was recognized by Newsweek as one of America's Greatest Workplaces in 2024. + Highly collaborative work environment focused on growth and innovation + Safety and sustainability are top priorities + Excellent compensation, benefits, generous perks; focused on employee wellbeing + Great development and advancement opportunities + Bring your real self to work, come grow with us! MLC operates the largest lime facility in the Americas and mines some of the purest limestone reserves in the world...and we are global! The company is committed to development and employee satisfaction. Join our outstanding team! About the Job The Safety Specialist is responsible for the execution of MLC safety systems and culture for Ste. Genevieve operations. Understand and assist in the development, execution, and measurement of safety goals, metrics and KPI's. Work with and assist other members of the safety & health department, as needed. + Stay current on safety and health regulations. Provide guidance for compliance with current MLC and governmental safety rules and regulations for all management, supervision and work force. + Work with safety pillar teams to address employee reports of unsafe acts or conditions and follow up to ensure any problems are resolved in a timely manner. Facilitate the sharing of best practices and areas of opportunity for safety pillar teams. Work with employees to risk rank major tasks and develop defenses where needed for those that represent significant risk. + Through learning teams, execute outstanding response and corrections to significant deviations/errors and preventive actions to reduce the likelihood and severity of future incidents. Work with employees to develop new and update existing Safety Standards, as necessary. + Conduct periodic inspections of plants, mines, and contractor work, to ensure working conditions and practices are in compliance with all safety rules and regulations. Consult with department management, and supervision on any safety violations noted, and provide guidance for corrective action. The primary responsibility of Safety Personnel is guidance; however, they have the authority to suspend work in an area or with equipment if required safety standards and/or safe work practice are being violated. + Coordinate safety inspections with regulatory agencies (primarily MSHA), in addition to Management and Labor unions. Accompany inspectors on all inspections and report proceedings of inspection activities, including following up to ensure any discrepancies are addressed and corrected, and closing out meetings after inspections. + Maintain and administer current Safety Incentive Programs and develop new programs as needed. Maintain continued interest in safety by promoting safety through communications. + Respond to emergencies as necessary, including off shifts, holidays, and weekends. Record reports of injury and arrange for medical treatment and transportation if required. Arrange for light duty work of injured employee and monitor their return to work. Report injuries to the Worker Compensation carrier and MSHA as necessary. Assist with workman's compensation cases, reporting, testifying etc + Develop/maintain an Industrial Hygiene Sampling Program to be compliant with MSHA/OSHA regs. (Noise, Dust, DPM and Welding Fume) and advise all plant management nationwide on compliance issues. Maintain proficiency in the use of instruments used for health monitoring in the workplace. Take periodic samples to ensure compliance with standards. + Develop and maintain monthly reports for the Safety Department. Data management required. Develop and conduct OSHA and MSHA training as necessary. Develop and conduct additional safety training programs as necessary. + Employees are expected to perform other responsibilities, as needed. Required Qualifications + Education: BS/BA Degree in Safety or equivalent safety experience required. MSHA Training Instructor Certification (IS, IU) a plus. + Experience: Previous MSHA and/or OSHA manufacturing experience preferred. Underground mining experience desired. + Certifications: MSHA Training Instructor Certification (IS, IU) a plus. + Skills: Attention to detail. Proficiency in MS Word, PowerPoint and Excel, web based safety data systems like Dakota. Practical proficiency in Industrial Hygiene sampling and monitoring. + Abilities: Ability to work and communicate well with personnel at all levels of the organization. + Behavior: Action Oriented, Customer Focus, Collaborates, Instills Trust, Values Differences, Manages Complexity, Drives Engagement, Cultivates Innovation, Resourcefulness, Self-Development, Tech Savvy. The Fine Print Benefits and perquisites may vary based on the nature and location of each job. Click here for MLC EEO information (****************************************************************************** About MLC MLC, headquartered in St. Louis, Mo., is a leading global supplier of high-calcium lime products and technical solutions. These offerings bring essential performance and value to a broad range of market applications, including metals, construction, chemical synthesis, water and emissions treatment, glass, textiles, plastics, rubber, agriculture, foods and beverages. With over a century in business, MLC has built a reputation on the quality of its products and services, as well as an unwavering commitment to safety, sustainability and service. The company's expanding global footprint includes a diversified, reliable network of production and distribution facilities in the U.S., as well as in the UK through our Singleton Birch business. For more information, visit ******************** . Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Site Safety and Health Officer (SSHO) will prepare and enforce Chugach's safety program for maintenance operations support team of skilled and semi-skilled tradespeople at Naval Air Facility, El Centro, CA. The contract will cover general service work, general maintenance, base support vehicles and equipment, environmental, and other base services. The SSHO is responsible to implement and administer Chugach's safety program and Government-accepted Accident Prevention Plan. This position is designed to establish a culture of safety throughout the contractual organization. Work Model: Onsite/Office Based Responsibilities Essential Duties and Job Functions: * Responsible for risk mitigation of all of the hazards identified in Chugach's Safety and Health Program IAW the accepted Accident Prevention Plan and shall be on-site at all times when the work that presents the hazards associated with their professional expertise is being performed. * Acts as primary point of contact for all safety-related issues. * Ensures a high level of internal and external customer service; investigates and corrects safety-related problems and risks. * Develops, implements, and maintains safety practices associated with assigned departments and interrelated departments and which align with Chugach's culture of safety. * Establishes programs for safety with the goal of aligning all operational functions with a structure that is focused on forward looking, i.e., preparing/approving safety procedures, providing work instructions/procedures/check sheets, maintain internal safety programs. * Develops and presents company and contract information at all hands meetings. * Ensures departmental reporting and data calls are executed in a timely, complete, and accurate manner. * Fosters teamwork between departments on safety-related issues. * Provides clear and decisive written and oral communication. * Establishes and maintains good working relationships with Government and internal customers. * Works professionally and collaboratively with all contract and company personnel. * Maintains a high degree of professionalism and works well with all levels of the organization. * Operates Government and Chugach-owned motor vehicles. * Adheres to established company safety personnel and SOPs and policies. * Performs other duties as assigned. Job Requirements Mandatory: * Five years of satisfactory experience in preparing and enforcing safety programs on contracts of similar size and complexity. * If possessing a Certified Safety Professional (CSP) certification, must possess five years of satisfactory experience in preparing and enforcing safety programs on contracts of similar size and complexity within the last three years. * Completed the OSHA 30-hour construction safety class or equivalent. * Must maintain competency through 24 hours of formal safety- and health-related coursework over four years. * Meets the requirements of EM 385-1-1 Section 1. * Skill in the use of MS Office Suite at an intermediate level. * Knowledge of generally accepted standards of workmanship in maintenance of facilities. * Knowledge of Government contracting terminologies and applications. * Ability to effectively communicate, read, and write in English. * Ability to be on site during the Government's regular working hours and shall be available on site within two hours after the Government's request after regular hours. * Knowledge of equipment maintenance. * Must have, and maintain, a valid Real ID driver's license with acceptable driving record. * Must be able to pass a Pre-Employment background check and drug screen test. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.