Staff Engineer jobs at Contech Engineered Solutions

690 Texas St, San Francisco, CA 94107 Mechatronics Systems & Motor Control Engineer ABOUT US: Skip is on a mission to make life joyful through powered movement. Movement is a powerful way to build physical, mental and social health. Yet it is elusive for 2 billion people due to age, injury, or disability. We are building products that will restore mobility for millions and enable a new frontier of joyful movement experiences. We want to build a future where a grandparent can easily outrun their grandkids and no one is left behind at the trailhead. Skip is a 20-person early-stage start-up that spun out of Google X in 2023. With deep cross-disciplinary expertise and key partnerships (e.g. with Arc'teryx) we are uniquely positioned to launch the first commercially successful wearable robotic device, the MO/GO, develop a platform to launch future Movewear products and transform millions of lives in the coming years. More information about Skip and MO/GO can be found at ******************* THE ROLE: We are seeking a highly motivated and adaptable individual who will explore the peaks and valleys of all problems that may come up while building a new generation of wearable robots for everyday life. We are looking for a mechatronics systems engineer who would primarily be responsible for the design, development, testing and validation of our powertrain, including motor control for novel actuators, and complex battery management. The team has just finished an “EVT” build, so we have functional prototypes but they need to be tested, improved and optimised with a whole-system approach. We are a team of 20 phenomenal senior engineers and product leaders, where everyone contributes directly to product development. As such this will start as an individual contributor role, with leadership for critical systems, and directing work for people contributing to the system (e.g. working closely with our test engineer and gearbox designer). Some of the specific responsibilities include, but are not limited to: Understand every element of our mechatronics system; being the go-to person for troubleshooting Guide design and development decisions for future iterations of the product, and future systems; including battery and motor specifications, motor control chip selection and firmware requirements Own the testing protocol to validate performance of the mechatronics at volumes and standards relevant to consumer products (and work with our Test Engineer to execute) Help us precisely control a range of actuators including off-the-shelf BLDCs, custom PMSM and axial flux motors, cycloid gearboxes, and series elastic actuators, including writing firmware for our motor control chip (currently c2000; but likely to change over time) Characterize and model our actuators for open-loop and closed-loop torque control. Create thermal models and evaluate the thermal limits of the actuator. Own the process of productising our novel actuation systems as standalone products and components of a broader platform Wear prototypes several hours a week to participate in data collection, on-body testing and provide feedback Bring joy to the team, participate in embarrassing team events, tolerate KZ's terrible music Basic Qualifications 5+ years' experience working in robotics or mechatronics Extensive experience controlling PMSM, including Ti and STM chipsets Experience with design for systems at scale , with a focus on testing and validation Demonstrable expertise in C/C++ for high performance applications Expertise with Linux, command-line tools, Python scripting Strong experience developing real-time firmware for multi-sensor systems Knowledge of low level hardware and OS internals at a kernel level Attention to detail, even in the middle of overly-long lists Experience with troubleshooting tools (JTAG, SWD, oscilloscopes, logic analyzers) Ability to work at the Skip Bay Area office >3 days/week Sense of humour, tolerant of Aussie & Canadian spelling Bonus Points Experience with powered consumer electronics (e.g. drones, robot vacuums) Experience in start-up environments and using AI coding tools to leverage your skills for broader impact Personal motivation to improve human movement Taylor Swift fan. Good taste in background music :) This is a full time position working at the Skip office in the San Francisco Bay Area, starting ASAP. Skip is an equal opportunity employer. Our hiring decisions are based on need and competence to satisfy said need. We do not discriminate on the basis of race, religion, color, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other legally protected status. Any and all offers of employment extended by Skip are conditional on candidates' ability to provide satisfactory proof of eligibility to maintain full-time employment in the United States. To apply, send via email a CV and cover letter to **************************

Holder Construction is seeking qualified highly motivated candidates in our Mechanical, Electrical and Plumbing Services Team at one of our regional projects in Columbus, OH. Primary Responsibilities Communication with electrical/mechanical equipment vendors, electrical/mechanical design engineers, clients and subcontractors. This position involves procurement of electrical/mechanical subcontracts and equipment, managing contracts and contract deliverables from bid solicitation through contract award, equipment submittal coordination, assistance with electrical/mechanical and overall construction cost estimates. Common projects include commercial projects within our core markets: Data Centers; Aviation; Higher Education and Corporate / Commercial Office. Requirements For This Position Include Bachelor's degree in Mechanical, Electrical Engineering or Construction Management The ideal candidate will have 5+ years of Mechanical, Electrical and Plumbing preconstruction experience and have the following skill sets: Ability to read and understand electrical, HVAC, plumbing, architectural and civil plans, and specifications Familiar with standard concepts, practices, and procedures of MEP Systems and equipment Good communication skills Ability to identify and resolve issues Effective participation in a team environment Detail-oriented with the ability to manage multiple projects and tasks

Holaday-Parks' Project Engineers support the successful execution of Design Build and Plan Spec projects from inception to project close out. Project Administrators represent our organization to our customers, other contractors, our employees and our community in a professional manner. They are efficient and highly organized. Essential Functions: Maintain Project Records during all phases of work. Assemble and distribute submittals and O&M's. Create and maintain RFI, CO, ASI and drawing logs. Track Daily Reports. Follow up to ensure RFI's are priced and responded to timely. Ensure punch list items are addressed. Estimating Support: Support estimating efforts as requested by Estimators. Estimating support may include counting fixtures, obtaining quotes from subcontractors and equipment suppliers, and preparing final bids for submission to the customer. Field Support: Project Engineers may be located in the main office or on the job site. When stationed on the job site, the Project Engineer will be responsible for maintaining drawings by incorporating changes and ensuring the correct information is distributed to the field staff. Tracking documentation as described above may be performed in the office or on site. Project Engineers support multiple projects when required. Career Path: The Project Engineer position is an entry level position in the Construction Industry. Experienced Project Engineers may have the opportunity to move into Project Manager roles as openings come available. Qualifications and Education: The preferred candidate will possess excellent oral and written communication skills, outstanding customer service and extraordinary organizational skills. They will have a sense of responsibility and ownership for the project. Four years college-level construction management training preferred; Working knowledge of MS Outlook, Word, Excel required; Experience with Procore, Microsoft Project, and Bluebeam Salary Range: $65,000-80,000 DOE Benefits: Holaday-Parks, Inc., offers an excellent salary and benefits package-paying 100% of medical/vision/dental, and prescription premiums for employees and an employee-centric culture. We also provide company-matching 401K program, and paid holidays/time off. If interested in applying, please submit your cover letter and resume to ************************. Holaday-Parks is an Equal Opportunity Employer (EOE), including protected veterans and people with disabilities

690 Texas St, San Francisco, CA 94107 Mechatronics Systems & Motor Control Engineer ABOUT US: Skip is on a mission to make life joyful through powered movement. Movement is a powerful way to build physical, mental and social health. Yet it is elusive for 2 billion people due to age, injury, or disability. We are building products that will restore mobility for millions and enable a new frontier of joyful movement experiences. We want to build a future where a grandparent can easily outrun their grandkids and no one is left behind at the trailhead. Skip is a 20-person early-stage start-up that spun out of Google X in 2023. With deep cross-disciplinary expertise and key partnerships (e.g. with Arc'teryx) we are uniquely positioned to launch the first commercially successful wearable robotic device, the MO/GO, develop a platform to launch future Movewear products and transform millions of lives in the coming years. More information about Skip and MO/GO can be found at ******************* THE ROLE: We are seeking a highly motivated and adaptable individual who will explore the peaks and valleys of all problems that may come up while building a new generation of wearable robots for everyday life. We are looking for a mechatronics systems engineer who would primarily be responsible for the design, development, testing and validation of our powertrain, including motor control for novel actuators, and complex battery management. The team has just finished an “EVT” build, so we have functional prototypes but they need to be tested, improved and optimised with a whole-system approach. We are a team of 20 phenomenal senior engineers and product leaders, where everyone contributes directly to product development. As such this will start as an individual contributor role, with leadership for critical systems, and directing work for people contributing to the system (e.g. working closely with our test engineer and gearbox designer). Some of the specific responsibilities include, but are not limited to: Understand every element of our mechatronics system; being the go-to person for troubleshooting Guide design and development decisions for future iterations of the product, and future systems; including battery and motor specifications, motor control chip selection and firmware requirements Own the testing protocol to validate performance of the mechatronics at volumes and standards relevant to consumer products (and work with our Test Engineer to execute) Help us precisely control a range of actuators including off-the-shelf BLDCs, custom PMSM and axial flux motors, cycloid gearboxes, and series elastic actuators, including writing firmware for our motor control chip (currently c2000; but likely to change over time) Characterize and model our actuators for open-loop and closed-loop torque control. Create thermal models and evaluate the thermal limits of the actuator. Own the process of productising our novel actuation systems as standalone products and components of a broader platform Wear prototypes several hours a week to participate in data collection, on-body testing and provide feedback Bring joy to the team, participate in embarrassing team events, tolerate KZ's terrible music Basic Qualifications 5+ years' experience working in robotics or mechatronics Extensive experience controlling PMSM, including Ti and STM chipsets Experience with design for systems at scale , with a focus on testing and validation Demonstrable expertise in C/C++ for high performance applications Expertise with Linux, command-line tools, Python scripting Strong experience developing real-time firmware for multi-sensor systems Knowledge of low level hardware and OS internals at a kernel level Attention to detail, even in the middle of overly-long lists Experience with troubleshooting tools (JTAG, SWD, oscilloscopes, logic analyzers) Ability to work at the Skip Bay Area office >3 days/week Sense of humour, tolerant of Aussie & Canadian spelling Bonus Points Experience with powered consumer electronics (e.g. drones, robot vacuums) Experience in start-up environments and using AI coding tools to leverage your skills for broader impact Personal motivation to improve human movement Taylor Swift fan. Good taste in background music :) This is a full time position working at the Skip office in the San Francisco Bay Area, starting ASAP. Skip is an equal opportunity employer. Our hiring decisions are based on need and competence to satisfy said need. We do not discriminate on the basis of race, religion, color, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other legally protected status. Any and all offers of employment extended by Skip are conditional on candidates' ability to provide satisfactory proof of eligibility to maintain full-time employment in the United States. To apply, send via email a CV and cover letter to **************************

690 Texas St, San Francisco, CA 94107 Mechatronics Systems & Motor Control Engineer ABOUT US: Skip is on a mission to make life joyful through powered movement. Movement is a powerful way to build physical, mental and social health. Yet it is elusive for 2 billion people due to age, injury, or disability. We are building products that will restore mobility for millions and enable a new frontier of joyful movement experiences. We want to build a future where a grandparent can easily outrun their grandkids and no one is left behind at the trailhead. Skip is a 20-person early-stage start-up that spun out of Google X in 2023. With deep cross-disciplinary expertise and key partnerships (e.g. with Arc'teryx) we are uniquely positioned to launch the first commercially successful wearable robotic device, the MO/GO, develop a platform to launch future Movewear products and transform millions of lives in the coming years. More information about Skip and MO/GO can be found at ******************* THE ROLE: We are seeking a highly motivated and adaptable individual who will explore the peaks and valleys of all problems that may come up while building a new generation of wearable robots for everyday life. We are looking for a mechatronics systems engineer who would primarily be responsible for the design, development, testing and validation of our powertrain, including motor control for novel actuators, and complex battery management. The team has just finished an “EVT” build, so we have functional prototypes but they need to be tested, improved and optimised with a whole-system approach. We are a team of 20 phenomenal senior engineers and product leaders, where everyone contributes directly to product development. As such this will start as an individual contributor role, with leadership for critical systems, and directing work for people contributing to the system (e.g. working closely with our test engineer and gearbox designer). Some of the specific responsibilities include, but are not limited to: Understand every element of our mechatronics system; being the go-to person for troubleshooting Guide design and development decisions for future iterations of the product, and future systems; including battery and motor specifications, motor control chip selection and firmware requirements Own the testing protocol to validate performance of the mechatronics at volumes and standards relevant to consumer products (and work with our Test Engineer to execute) Help us precisely control a range of actuators including off-the-shelf BLDCs, custom PMSM and axial flux motors, cycloid gearboxes, and series elastic actuators, including writing firmware for our motor control chip (currently c2000; but likely to change over time) Characterize and model our actuators for open-loop and closed-loop torque control. Create thermal models and evaluate the thermal limits of the actuator. Own the process of productising our novel actuation systems as standalone products and components of a broader platform Wear prototypes several hours a week to participate in data collection, on-body testing and provide feedback Bring joy to the team, participate in embarrassing team events, tolerate KZ's terrible music Basic Qualifications 5+ years' experience working in robotics or mechatronics Extensive experience controlling PMSM, including Ti and STM chipsets Experience with design for systems at scale , with a focus on testing and validation Demonstrable expertise in C/C++ for high performance applications Expertise with Linux, command-line tools, Python scripting Strong experience developing real-time firmware for multi-sensor systems Knowledge of low level hardware and OS internals at a kernel level Attention to detail, even in the middle of overly-long lists Experience with troubleshooting tools (JTAG, SWD, oscilloscopes, logic analyzers) Ability to work at the Skip Bay Area office >3 days/week Sense of humour, tolerant of Aussie & Canadian spelling Bonus Points Experience with powered consumer electronics (e.g. drones, robot vacuums) Experience in start-up environments and using AI coding tools to leverage your skills for broader impact Personal motivation to improve human movement Taylor Swift fan. Good taste in background music :) This is a full time position working at the Skip office in the San Francisco Bay Area, starting ASAP. Skip is an equal opportunity employer. Our hiring decisions are based on need and competence to satisfy said need. We do not discriminate on the basis of race, religion, color, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other legally protected status. Any and all offers of employment extended by Skip are conditional on candidates' ability to provide satisfactory proof of eligibility to maintain full-time employment in the United States. To apply, send via email a CV and cover letter to **************************

690 Texas St, San Francisco, CA 94107 Mechatronics Systems & Motor Control Engineer ABOUT US: Skip is on a mission to make life joyful through powered movement. Movement is a powerful way to build physical, mental and social health. Yet it is elusive for 2 billion people due to age, injury, or disability. We are building products that will restore mobility for millions and enable a new frontier of joyful movement experiences. We want to build a future where a grandparent can easily outrun their grandkids and no one is left behind at the trailhead. Skip is a 20-person early-stage start-up that spun out of Google X in 2023. With deep cross-disciplinary expertise and key partnerships (e.g. with Arc'teryx) we are uniquely positioned to launch the first commercially successful wearable robotic device, the MO/GO, develop a platform to launch future Movewear products and transform millions of lives in the coming years. More information about Skip and MO/GO can be found at ******************* THE ROLE: We are seeking a highly motivated and adaptable individual who will explore the peaks and valleys of all problems that may come up while building a new generation of wearable robots for everyday life. We are looking for a mechatronics systems engineer who would primarily be responsible for the design, development, testing and validation of our powertrain, including motor control for novel actuators, and complex battery management. The team has just finished an “EVT” build, so we have functional prototypes but they need to be tested, improved and optimised with a whole-system approach. We are a team of 20 phenomenal senior engineers and product leaders, where everyone contributes directly to product development. As such this will start as an individual contributor role, with leadership for critical systems, and directing work for people contributing to the system (e.g. working closely with our test engineer and gearbox designer). Some of the specific responsibilities include, but are not limited to: Understand every element of our mechatronics system; being the go-to person for troubleshooting Guide design and development decisions for future iterations of the product, and future systems; including battery and motor specifications, motor control chip selection and firmware requirements Own the testing protocol to validate performance of the mechatronics at volumes and standards relevant to consumer products (and work with our Test Engineer to execute) Help us precisely control a range of actuators including off-the-shelf BLDCs, custom PMSM and axial flux motors, cycloid gearboxes, and series elastic actuators, including writing firmware for our motor control chip (currently c2000; but likely to change over time) Characterize and model our actuators for open-loop and closed-loop torque control. Create thermal models and evaluate the thermal limits of the actuator. Own the process of productising our novel actuation systems as standalone products and components of a broader platform Wear prototypes several hours a week to participate in data collection, on-body testing and provide feedback Bring joy to the team, participate in embarrassing team events, tolerate KZ's terrible music Basic Qualifications 5+ years' experience working in robotics or mechatronics Extensive experience controlling PMSM, including Ti and STM chipsets Experience with design for systems at scale , with a focus on testing and validation Demonstrable expertise in C/C++ for high performance applications Expertise with Linux, command-line tools, Python scripting Strong experience developing real-time firmware for multi-sensor systems Knowledge of low level hardware and OS internals at a kernel level Attention to detail, even in the middle of overly-long lists Experience with troubleshooting tools (JTAG, SWD, oscilloscopes, logic analyzers) Ability to work at the Skip Bay Area office >3 days/week Sense of humour, tolerant of Aussie & Canadian spelling Bonus Points Experience with powered consumer electronics (e.g. drones, robot vacuums) Experience in start-up environments and using AI coding tools to leverage your skills for broader impact Personal motivation to improve human movement Taylor Swift fan. Good taste in background music :) This is a full time position working at the Skip office in the San Francisco Bay Area, starting ASAP. Skip is an equal opportunity employer. Our hiring decisions are based on need and competence to satisfy said need. We do not discriminate on the basis of race, religion, color, gender, sexual orientation, gender identity, age, marital status, veteran status, disability status, or any other legally protected status. Any and all offers of employment extended by Skip are conditional on candidates' ability to provide satisfactory proof of eligibility to maintain full-time employment in the United States. To apply, send via email a CV and cover letter to **************************

Senior Mechanical Engineer, Mission Critical Best People + Right Culture. These are the driving forces behind JE Dunn's success. By hiring inspired people, giving them interesting and challenging work, enabling them with innovative tools, and letting them share in the company's rewards, we've found a sustainable way to grow in our industry for the last 100+ years. Our diverse teams around the country strive to enrich lives through inspired people and places everyday, and we need inspired people like you to join us in our pursuit of building perfection. JE Dunn's Advanced Facilities Group (AFG) combines Mission Critical, Advanced Industries, and Industrial & Manufacturing into one high-performing team focused on cutting-edge work to serve innovative clients on large Industrial & Manufacturing, Data Center, and Semiconductor projects. As part of the Advanced Facilities team, you'll work on some of the most advanced construction projects across the country, growing your career alongside our diverse team of industry professionals. Key Role Responsibilities - Core ME ENGINEER FAMILY " CORE Learns and actively participates in all aspects of the company's safety and quality plans and culture by demonstrating commitment to an injury-free environment through individual actions and mentoring others. Completes entry level and routine mechanical, electrical and field construction activities. Learns how to develop budgetary M/E estimates, based upon program and schematic design information using automated M/E estimating system. Assists in the review of mechanical and electrical options as part of the preconstruction process and completes systems analysis for select projects. Learns to develop the mechanical and electrical scopes of work used to coordinate during the bid process. Assists in the completion of bid analysis and provides input during the subcontractor selection process. Assists in developing sequencing requirements of various systems and providing solutions to meet the schedule requirements. Gains knowledge of design documents in order to identify potential quality problems to assist in developing constructability review reports. Learns to perform job inspections to ensure specifications and expectations are met and work is completed in a quality and timely manner. Learns and assists with the shop drawing/submittal process to comply with the contract documents. Assists with the commissioning process including developing pre-functional checklists, functional testing procedures and actual functional testing. Key Role Responsibilities - Additional Core SENIOR M/E ENGINEER In addition, this position will be responsible for the following: Completes increasingly complex mechanical, electrical and field construction activities. Develops budgetary M/E estimates, based upon program and schematic design information. Reviews mechanical and electrical options, completes systems analysis, recommends best system for the project and provides value engineering suggestions. Coordinates the mechanical and electrical scopes of work during the bid process. Develops sequencing requirements of various systems and provides solutions to meet the schedule requirements. Provides scheduling input during projects. Reviews design documents and identifies potential quality problems. Helps develop quality control programs. Performs job inspections at various times in the project to ensure specifications and expectations are met and work is completed in a quality manner. Develops pre-functional checklists and functional testing procedures. Verifies contractor's performance of functional test. Reviews and approves shop drawings prior to submitting to the design team. Generates and issues the Commissioning Plan for approval to the appropriate parties. Verifies deficiencies are corrected and submits commissioning documentation to owners. Provides mentoring to less experienced co-workers. Creates M/E tools and innovative solutions to continuously improve processes and work products. Negotiates subcontracts with subcontractors. Purchases equipment from equipment vendors for assigned projects. Builds relationships by being the direct face with the client. Participates in interviews for winning work, presentations and business development efforts. Represents the M/E department and JE Dunn at external community events. Assumes responsibility for resource allocation, staffing of their assigned projects and ensuring reimbursability requirements are met. Leads, supports and promotes a culture of diversity and inclusion within JE Dunn. Understands JE Dunn's policy of non-discrimination and ensures positive, proactive implementation throughout the organization. Knowledge, Skills & Abilities Ability to perform work accurately and completely, and in a timely manner. Communication skills, verbal and written (Advanced). Ability to conduct effective presentations (Advanced). Proficiency in MS Office (Advanced). Ability to read and understand plans, drawings and specifications. Proficiency in basic JE Dunn construction M/E tools and software. Ability to apply fundamentals of the means and methods of construction management to projects. Thorough knowledge of project processes and how each supports the successful completion of a project. Ability to build relationships with team members that transcend a project. Proficiency in required construction technology (Advanced). Proficiency in scheduling software (Intermediate). Proficiency in BIM (Building Information Modeling) (Intermediate). Ability to apply Lean process and philosophy (Advanced). Ability to manage budgets, maximize profitability and generate future work through building relationships (Advanced). Demonstrated knowledge of ASE and Lens (Intermediate). Ability to construct a project from start to finish. Ability to prepare the project budget, GMP or hard bid. Ability to complete range estimates. Ability to assist Marketing team with presentation and marketing activities. Ability to manage a team. Ability to build relationships and collaborate within a team, internally and externally. Education Bachelor's degree in mechanical engineering, electrical engineering, architectural engineering or related field (Required). In lieu of the above requirements, equivalent relevant experience will be considered. Experience 10+ years construction management experience (Preferred). Working Environment Valid and unrestricted drivers license required Benefits Information The benefits package aligned to this position is Professional Non-Union. Please click the link below for more details. Click here for benefits details. This role is expected to accept applications for at least three business days and may continue to be posted until a qualified applicant is selected or the position has been cancelled. JE Dunn Construction is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. JE Dunn Construction is a background screening, drug-free workplace. JE Dunn provides reasonable accommodations to qualified individuals with disabilities. If you would like to request a reasonable accommodation in order to apply for a job, please submit your request to accommodations@jedunn.com JE Dunn Construction Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of JE Dunn Construction without a prior written search agreement will be considered unsolicited and the property of JE Dunn Construction Company. Please, no phone calls or emails.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Duties/Responsibilities: Develop and refine electrical system layouts, schematics, and specifications. Review and process equipment and system submittals to ensure compliance with project requirements. Prepare and modify drawings, ensuring accuracy and clarity in design documentation. Utilize AutoCAD, Revit, and engineering analysis software for system design and documentation. Conduct power system analysis, including short circuit, voltage drop, and arc flash studies. Perform load calculations, lighting level analysis, and energy efficiency assessments. Support equipment selection, panel schedules, and system coordination. Ensure all designs adhere to NEC, energy codes, and client-specific guidelines. Collaborate with multidisciplinary teams to integrate electrical designs into overall project plans. Attend meetings with clients, architects, and contractors to resolve design issues and refine project scope. Conduct site visits to evaluate existing electrical conditions and support field installations. Contribute to the continuous improvement of our design processes. Provide engineering support during construction to ensure successful project execution. Required Skills/Abilities: Strong knowledge of electrical engineering principles, including power distribution and lighting systems. Proficiency in AutoCAD, Revit, and engineering analysis software. Familiarity with NEC and other relevant electrical codes and standards. Ability to analyze and interpret electrical specifications and technical documents. Effective problem-solving skills and the ability to manage multiple tasks. Actively contribute to a collaborative team environment, where your expertise and innovative ideas are highly valued. Strong communication skills, both written and verbal. Education and Experience: Bachelor's degree in Electrical Engineering, Architectural Engineering, or a related field. Minimum of 2 years of experience in electrical design or engineering within the construction industry. Engineer-In-Training (EIT) certification preferred, with encouragement to pursue Professional Engineer (PE) licensure. Experience with commercial, high-rise residential, or data center projects is appreciated. LEED AP certification is appreciated. Proficiency in Microsoft Office applications (Word, Excel, Outlook). Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

Redwood Electric is looking for a highly motivated and proactive individual who will be responsible for supporting the Project Manager and Project Team in the day-to-day operations of construction projects. About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Responsibilities Duties will include but are not limited to material procurement and tracking, document management, estimating, and client relations. Workload may vary from several small-sized jobs to one large project. Support projects team with day-to-day operations of construction projects. Review project drawings and/or specifications for given projects. Establish and create submittals in conjunction with submittal logs. Assist with the production and/or processing of RFIs. Material procurement including quantity take-offs coordination with purchasing team and tracking tools to ensure product is delivered on schedule. Change Order pricing, including lump sum change orders and Field Work Order tracking and proposals. Assist engineering department on design/build projects. Attend project and field job site meetings as needed. Coordinate schedules with the field team and superintendent onsite. Coordinate schedules with vendors, manufacturers, and subcontractors. Interact with clients, interpreting their needs and requirements, and providing timely responses. Prioritize and perform multiple tasks in a dynamic environment with time-sensitive deadlines. Understand and follow operating procedures within company and jobsite guidelines. Represent the company in a safe and professional manner. Skills and Qualifications Minimum 2 years of experience in the electrical construction industry as a Field Engineer and/or Estimator High school diploma or GED required Degree in Construction management, engineering or related field preferred Experience with Accubid Trimble preferred Proficient with Microsoft Office, Adobe, and Bluebeam Ability to problem solve and drive positive resolutions Adept at organizing and documentation Strong research and analytical skills Knowledge of inventory and supply management preferred Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Headquartered in Bensalem PA and founded in 1999, EDA Contractors holds an extensive portfolio of experience related to the exterior envelope of commercial, institutional, and industrial buildings. EDA achieves excellence by integrating design knowledge, continuous training, and accountability into every facet of the company. EDA provides a wide range of comprehensive services: Air & Vapor Barriers, Green Roof Systems, Masonry, Repair & Maintenance, Roofing & Sheetmetal, Siding & Wall Panels, Slate & Copper Roofing, Louvers, Glass & Glazing and Waterproofing. EDA is a growth and customer-oriented organization. We are proud to foster a workplace culture that has been recognized with several Top Workplace awards. Job Summary EDA is seeking a competent Technical-Focused Project Manager (known Internally as an EDA Project Engineer) who specializes in either Low Slope Roofing or Exterior Facade scopes. The Project Engineer will interface with internal project teams to assist with their particular needs by serving as the dedicated team member tasked with researching and providing all required technical support to our PM teams by gaining profound knowledge of our projects, assisting with product selection, creating submittals, overseeing 3rd party shop drawings and engineering calculations, along with providing material take-offs and material order lists with professional oversight and solutions to challenges with design and field conditions. A Project Engineer will work with various departments from project management to shop fabrication and field operations, in order to ensure balance across various aspects of the project from constructability, sequencing and coordination to fabrication and install. Additionally, a Project Engineer will strive to improve by continuing to learn and research advanced technology regarding best practices in the field leading to cost-effective solutions. A Project Engineer is generally located within the company and works alongside other professionals to meet customer's needs. They usually begin as Project Managers or Assistant Project Managers, and as they advance on their career path within the company will become transitioned to the role of Project Engineer through training and/or previous experience and technical knowledge of our scopes of work. Individuals with a firm holistic understanding of both the operational and scope aspects of projects tend to excel in this position. You'll be a member of our brilliant engineering team, contributing to the design and construction of new cutting-edge architecture. To be successful in this position, you should have hands-on experience with project management, advanced technical knowledge of building envelopes, strong attention to detail and an in-depth understanding of construction details, sequencing and coordination. It's also important that you have rock-solid self-management and communication skills to meet the daily demands of this role. Job Responsibilities Obtain expert knowledge of a project by researching and studying contract documents Develop and manage relationships with manufacturers and vendors Research products for performance requirements and code compliance Assist with product selection by procuring pricing and product data for all potential products Create all submittal packages required for our scopes of work Facilitate all shop drawings and engineering calculations Assist in reviewing and analyzing shop drawing details for constructability and best practices Provide value engineering alternatives and innovative solutions to enhance project needs Perform material take-offs and provide material order lists Oversee and facilitate off-site mockups and testing Provide technical support and problem solving for field conditions Serve as the technical expert in project meetings with our customers Collaborate with shop, CAD operators, other engineers and field staff Attend conferences and lunch and learns to continue education Knowledge, Skills, and Abilities: Capable of critical thinking, risk assessment, problem solving & predictability Skilled in conflict resolution and negotiation Fluent in communicating ideas & concepts including visual diagrams Apply discernment and exercise proper ethical principles in all decisions Capable to attend meetings and effectively communicate with project team and customers Great computational and spatial ability Excellent oral and written communication Attention to detail Develop and maintain positive working relationships with internal and external customers and vendors Project development and leadership skills are essential Ability to work with various departments to facilitate the orderly execution of a proposed project plan Understanding of safety standards and environmental impact of a design Proficient in Microsoft Excel, OnScreen Take-Off, Bluebeam Requirements: Bachelor's degree in related engineering field preferred Previous experience as a Project Manager or a similar role Knowledge and Experience working with Low Slope Roofing and/or Exterior Facades EDA Contractors is an equal opportunity, affirmative action employer dedicated to diversity and the strength it brings to the workplace. All qualified applicants will receive consideration for employment regardless of race, color, age, religion, sex, national origin, protected veteran status, sexual orientation, gender identity, genetic information, disability status, or any other protected characteristic.

**Compensation is between $85,000 to $95,000 DOE** **Hiring Bonus** At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our CA locations. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer #MV-L1

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

As a Project Engineer at Graycor, you will enroll in our Engineering Mentoring Program designed to expose you with the critical hands-on experience necessary to build your successful career in construction. You will receive ongoing, specialized one-on-one training, coaching and mentoring on a variety of challenging and interesting project assignments, and a full rotation between departments. You will be actively involved in your career development, making self-assessments of your progress against established core competencies. Engineers will typically spend 24 months in the Engineer Mentoring Program before advancing to a new position with Graycor. AS A PROJECT ENGINEER, YOU WILL GAIN EXPERIENCE IN THE FOLLOWING AREAS: Project Management/ Project Controls: Assist Project Manager and Superintendent in the efficient control and management of the project, while ensuring safety and quality programs are being executed on the project site. Develop and maintain the critical path project schedule, including ongoing revisions. Assist the Project Manager and/or Superintendent in the preparation of short-term look-ahead schedules and the application of Lean Construction techniques. Maintain project documentation and expedite to the Owner, Architect, and Engineers for approval. Develop and maintain a thorough understanding of the provisions and requirements of all contract documents, including plans, specifications, owner's contract, subcontracts and purchase orders. Assist in the procurement of equipment and materials, and track and expedite their delivery. Track and evaluate subcontractor and vendor performance. Interact with subcontractors and vendors regarding technical and contractual matters. Estimating/ Preconstruction Services: Assist in the preparation of estimates and quotations to obtain project work. Assist the Project Manager and/or Estimator in bid preparation, subcontractor/vendor solicitation, evaluation and award. TO BE SUCCESSFUL IN THE GRAYCOR ENGINEERING MENTORING PROGRAM, YOU WILL NEED: Bachelor's degree in construction management, engineering, or other relevant technical discipline. 0-3 years of relevant construction internship or post-undergraduate experience. The ability to travel extensively and temporarily reside at the project site for extended periods of time, with travel home provided every other weekend. Travel subsistence pay and travel incentive bonuses may apply. Ambition to grow professionally and acquire new knowledge and skills. Our most successful Engineers are motivated to succeed and are passionate about construction across a variety of projects. Our typical project portfolio includes retail mall development, entertainment/ recreational, hospitality/lodging, office, logistics/distribution and cold storage, manufacturing, and green/ LEED building industries. The fortitude to juggle competing priorities in a fast-paced environment. Multi-tasking with a sense of urgency while maintaining strong attention to detail and accuracy is crucial. Effective communication skills, with the ability to interact professionally with managers, co-workers, subcontractors, and construction craft employees. Problem solving and critical thinking skills. Working knowledge of MS Office Suite. Additional basic knowledge of scheduling, estimating and takeoff software is a plus. We use Primavera P6, WinEst and On-Screen Takeoff.

Holder Construction is an ENR Top 30 Construction industry leader with operations throughout the United States. We are currently seeking highly motivated construction professionals to join our company as a Senior Engineer position on a project in Conesville, OH. Primary Responsibilities Initial responsibilities include onsite trade management, including but not limited to: coordination of materials from design and fabrication to delivery and final installation; tracking and validation of monthly payment applications for trade contractors; management of cost and issue resolution such as reviewing and processing change orders, submitting RFIs, and proactively identifying issues before they arise; and assume ownership of the holistic job beyond assigned trade contracts. Read and understand Construction Design Documents and Specifications. Exemplify Holder's Culture by Leading with Integrity and Developing Each Other though providing leadership to our younger associates on the project. Requirements For This Position Include Bachelor's degree in a construction/engineering related field OR 3+ years of equivalent work experience Successful candidates will also possess outstanding communication and time management skills, computer skills, willingness to relocate, and the ability to work in a collaborative environment. EEO-AAP Substance abuse testing is a condition of employment.

Electrical Engineer, Mission Critical Best People + Right Culture. These are the driving forces behind JE Dunn's success. By hiring inspired people, giving them interesting and challenging work, enabling them with innovative tools, and letting them share in the company's rewards, we've found a sustainable way to grow in our industry for the last 100+ years. Our diverse teams around the country strive to enrich lives through inspired people and places everyday, and we need inspired people like you to join us in our pursuit of building perfection. JE Dunn's Advanced Facilities Group (AFG) combines Mission Critical, Advanced Industries, and Industrial & Manufacturing into one high-performing team focused on cutting-edge work to serve innovative clients on large Industrial & Manufacturing, Data Center, and Semiconductor projects. As part of the Advanced Facilities team, you'll work on some of the most advanced construction projects across the country, growing your career alongside our diverse team of industry professionals. Key Role Responsibilities - Core ME ENGINEER FAMILY " CORE Learns and actively participates in all aspects of the company's safety and quality plans and culture by demonstrating commitment to an injury-free environment through individual actions and mentoring others. Completes entry level and routine mechanical, electrical and field construction activities. Learns how to develop budgetary M/E estimates, based upon program and schematic design information using automated M/E estimating system. Assists in the review of mechanical and electrical options as part of the preconstruction process and completes systems analysis for select projects. Learns to develop the mechanical and electrical scopes of work used to coordinate during the bid process. Assists in the completion of bid analysis and provides input during the subcontractor selection process. Assists in developing sequencing requirements of various systems and providing solutions to meet the schedule requirements. Gains knowledge of design documents in order to identify potential quality problems to assist in developing constructability review reports. Learns to perform job inspections to ensure specifications and expectations are met and work is completed in a quality and timely manner. Learns and assists with the shop drawing/submittal process to comply with the contract documents. Assists with the commissioning process including developing pre-functional checklists, functional testing procedures and actual functional testing. Key Role Responsibilities - Additional Core ME ENGINEER 2 In addition, this position will be responsible for the following: Helps generate, issue and execute the Commissioning Plan for assigned projects. Interacts independently with project teams regarding work product deliverables. Assumes responsibility for producing and explaining work product to assigned clients and represents JE Dunn in professional manner. Reviews compliance shop drawings and submittals from subcontractors prior to submission to the design team. Leads the mechanical/electrical coordination process. Participates in all phases of construction from startup to closeout for the successful delivery of end product to the client. Develops schedules for mechanical/electrical systems. Performs site inspections and submits report to the project team. Creates constructability reviews and submits report to the project team. May participate in job pursuit presentations representing mechanical/electrical expertise. Provides budgetary M/E estimates, based upon program and schematic design information using automated M/E estimating system for assigned projects. Reviews the mechanical and electrical options as part of the preconstruction process and completes systems analysis for select projects. Gains knowledge of developing the mechanical and electrical scopes of work used to coordinate during the bid process. Participates in the completion of bid analysis and provides input during subcontractor selection process. Develops sequencing requirements of various systems and provides solutions to meet the schedule requirements. Reviews the design documents and identifies potential quality problems to help develop constructability review reports. Performs job inspections to ensure specifications and expectations are met and work is completed in a quality and timely manner. Participates in the shop drawing/submittal process to comply with the contract documents. Participates in the commissioning process, including developing pre-functional checklists, functional testing procedures and actual functional testing. Knowledge, Skills & Abilities Ability to perform work accurately and completely, and in a timely manner. Communication skills, verbal and written (Intermediate). Proficiency in MS Office (Intermediate). Ability to read and understand plans, drawings and specifications. Proficiency in basic JE Dunn construction M/E tools and software. Knowledge of means and methods of construction management. Ability to build relationships and collaborate within a team, internally and externally. Education Bachelor's degree in mechanical engineering, electrical engineering, architectural engineering or related field (Required). In lieu of the above requirements, equivalent relevant experience will be considered. Experience 2+ years construction and/or engineering experience (Required). Working Environment Benefits Information The benefits package aligned to this position is Professional Non-Union. Please click the link below for more details. Click here for benefits details. This role is expected to accept applications for at least three business days and may continue to be posted until a qualified applicant is selected or the position has been cancelled. JE Dunn Construction is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. JE Dunn Construction is a background screening, drug-free workplace. JE Dunn provides reasonable accommodations to qualified individuals with disabilities. If you would like to request a reasonable accommodation in order to apply for a job, please submit your request to accommodations@jedunn.com JE Dunn Construction Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of JE Dunn Construction without a prior written search agreement will be considered unsolicited and the property of JE Dunn Construction Company. Please, no phone calls or emails.

Contech is a leading provider of innovative infrastructure solutions. We are seeking a dynamic Staff Design Engineer to join our team. In this consultative role, you will play a key part in providing technical support, designing engineering solutions, and contributing to the success of our products in the market. What We Offer: Collaboration: Work alongside in-house engineers, gain invaluable experience collaborating with external engineers, and contribute to the common goals and objectives of the company. Career Growth: Join an industry leader known for its world-class design, manufacturing, sourcing, and distribution, and take your career to new heights. Work-Life Balance: Achieve your professional goals without compromising your personal life. Comprehensive Benefits: We offer a competitive benefits package with options that cater to you and your family's needs. About the Role: Project Specific Design Services: Review project plans and provide design services. Develop product solutions and prepare submittal drawings and calculations. Offer technical advice to support the integration of Contech's products into site plans. Focus on Specialty Products: Primarily work with Contech's bridge and specialty products such as structural plate, liner plate, and sheetpiling. Conduct structural analysis, hydraulic analysis, and geotechnical reviews. Provide drainage support for products such as corrugated metal pipe and plastic pipe. Collaboration and Support: Work closely with in-house engineers, CAD Techs, Sales/Marketing Team, and external engineers. Provide technical support to the Operations/Manufacturing team for proper fabrication. Communicate and coordinate efforts with field sales staff and manufacturing team. Training and Development: Offer training and guidance to the team. Check work produced by team members for accuracy. Assist in the development of training programs and aids for Contech's products. Professional Development and Networking: Maintain professional relationships and attend industry trade shows, seminars, and continuing education courses. Contribute to the writing and development of technical papers and product literature. Qualifications: Bachelor's in Civil, Environmental or related engineering degree. Structural, hydraulic, or geotechnical background preferred. EIT certification preferred. 1-2 years of experience in civil site project preferred. Strong analytical and problem-solving skills. Highly organized with the ability to multi-task. Proficiency in Excel and Microsoft Office. Strong written and verbal communication skills. AutoCAD skills proficiency preferred. Some exposure to Finite Element Analysis (FEA). Join Contech's dynamic and innovative Structural Engineering team and be part of the solution for building a better tomorrow through sustainable structural solutions. Ready to Apply? The process is simple. Clock on the "apply" button to get started. Good luck!