Manufacturing Engineering Internship jobs at Danaher - 591 jobs

Manufacturing Engineering Department seeking a Manufacturing Engineer II to perform all manufacturing engineering duties. The ideal candidate must possess effective verbal, written presentation, negotiation and interpersonal skills. Demonstrate ability to generate manufacturing documentations, specifications and technical reports in a concise manner, hands on and action oriented engineer with strong analytical, critical thinking skills and able to work well under general directions with minimum supervision. The candidate should be data driven, goal oriented and willing to learn and develop new skills, able to work in a fast paced, time sensitive, multi-project and results driven environment with multi-disciplinary team interface. The ideal candidate must be able to plan and organize non-routine task. Responsibilities To identify, order and commission the key process equipment to CGMP in the Operations Engineering Cycle to meet key business objectives Engineering process owner for the area Develop and modify manufacturing documentation and procedures to support commercial products as well as the introduction of new products to the production floor (assembly procedures, BOMs, etc.) Ensure that new products introduced to the production floor meet business, quality, output and cost goals and objectives Develop and modify various manufacturing processes to improve product and process quality and output Ensure product/process requirements are met for component, assembly, tooling and supplier specifications Support material discrepancy review and disposition activities (MRB) for existing commercial products Develops knowledge in a field to become a recognized leader or authority in an area of specialization and applies this knowledge in leadership roles in the company Eliminate/reduce product/process defects and improve yields. Strong problem solver for technical problems in the area, solves problems from basic engineering principles, theories and concepts. Support all quality and corrective/preventive actions initiatives (NCEP, CAPA) to achieve quality goals Capable of training cross functional team members including, engineers, technicians and product builders Knowledge of project management Interacts cross functionally and with internal and external customers Ability to develop expert knowledge on BSC systems. Willing to travel internationally as part of project team. For individual who is assigned calibration engineering role only: Provide equipment calibration services necessary to meet company objectives, while assuring measurement traceability to nationally recognized equipment calibration standards and practices. Technical SME for Calibration group and SME for internal and external Audit SME for Calibration Management System Manage and Perform calibration functions. Sets day to day function for calibration group Researches, recommends, and acquires new standards and other capital equipment, providing detailed justifications and cost analysis as required. Develops technical engineering reports and complex technical calibration procedures and trains department technicians on new calibration procedures. Works directly with Equipment Engineering and Manufacturing Engineering departments to advise on equipment selection, design accommodations for calibration of new equipment and appropriate measurement techniques. Provides support and guidance to calibration technicians in performing complex equipment calibrations. Manage calibration lab needs regarding such issues as environmental control and new technologies. Works with Senior Metrology Engineer and Management to develop the department fiscal year budgets. Communicates with the Operations ME function on calibration status. Build Quality into all aspects of work by maintaining compliance to all quality requirements Requirements Candidate required possess at least Bachelor's Degree in Engineering. Required at least 5 ~ 7 years of working experience in manufacturing or process engineering. Proven track record in product transfers, equipment qualification, and process validation. Experience in working within a matrix organization and cross-site collaboration. Able to work under supervisory direction, provides input to Equipment engineering or external equipment/tooling or material vendors in the selection, design & development of new product. Prefer candidate with strong project management and technical documentation skills. Proficient in validation protocol/report writing (IQ/OQ/PQ). Skilled in root cause analysis and process improvement method. Effective communication and stakeholder management across global teams. About Us As a global medical technology leader for more than 40 years, our mission at Boston Scientific (NYSE: BSX) is to transform lives through innovative medical solutions that improve the health of patients. If you're looking to truly make a difference to people both around the world and around the corner, there's no better place to make it happen. #J-18808-Ljbffr

A leading medical technology company is seeking a Manufacturing Engineer II in Boston to oversee manufacturing operations and documentation. The ideal candidate will have 5-7 years of experience in engineering, strong analytical abilities, and effective communication skills. This position involves working in a fast-paced environment and requires a Bachelor's degree in Engineering. Opportunities for project management and international travel are available. #J-18808-Ljbffr

A global medical technology leader is seeking a Manufacturing Engineer II to perform various engineering duties, including developing manufacturing documentation and ensuring product quality. The ideal candidate will have a Bachelor's degree in Engineering and 5-8 years of relevant experience, possessing strong analytical, problem-solving, and leadership skills. This role involves cross-functional collaboration, training team members, and achieving production goals. Join us to make a difference in patient health. #J-18808-Ljbffr

A global medical technology leader is seeking a Senior Manufacturing Engineer to perform manufacturing engineering duties. The ideal candidate should possess strong analytical skills and at least 8 years of experience in a related field, preferably in the medical device industry. Responsibilities include overseeing key process equipment, developing manufacturing documentation, and training team members. Join a company dedicated to transforming lives through innovative medical solutions. #J-18808-Ljbffr

Consumers Credit Union (CCU) is one of the largest, fastest growing credit unions in Illinois! Every year we look for a diverse group of hardworking students to join our IGNITE Intern Program. What does IGNITE mean to us and what can you expect? Interns Growing, Networking, and Innovating through Transformational Experiences. We hire college students because we believe in fresh ideas. These are not paper pushing, copy making internships. We provide real work experience to our Interns. During the Program you will interact with and get exposure to multiple departments and leaders throughout the Credit Union. You'll learn firsthand why we are a certified Great Place to Work and experience our awesome team atmosphere by working with other Interns on projects, volunteering in the community, and participating in events and educational sessions. Our intent is to create a future career path for students who have an interest in the financial services industry. IGNITE is designed to expose you to a variety of opportunities while fostering growth and learning. We are seeking students that are interested in a Summer 2026 internship supporting the Process Improvement team. The Process Improvement Intern will report to the Director of Process Improvement and will help support the growth of our established Test Automation framework. Test automation involves running tests automatically, managing test data, and using the results to enhance system and software quality. This work will include maintaining and enhancing our existing regression suites and conduct a comparative analysis between the automated regression suites and the manual testing activities currently performed by testers. The goal of this analysis is to identify overlaps and opportunities to reduce manual testing where coverage already exists in automated tests. Requirements for the Process Improvement internship Currently attending an accredited college or university. Rising juniors and seniors working toward a bachelor's degree in Computer Science, Software Engineering, Computer Engineering, or Quality Assurance, or a related major. Rising sophomores may be considered. Minimum 3.0 GPA. Ability to work 32 hours per week for the summer (generally 8:00-5:00 Monday-Thursday) for the duration of the 12-week program (5/26/2026 - 8/13/2026). The schedule will involve onsite days based in Lake Forest, IL. Local candidates only. Proficient with Word, PowerPoint, Excel and the wider Microsoft Office suite including email, calendaring, and instant messaging. Professional written and verbal communication skills. Problem solving, critical thinking, and strong mathematical skills. Detail oriented, strong visual inspection skills, able to produce accurate work. Ability to work independently after receiving work direction. Good time management skills. Basic understanding of Quality Assurance life cycle, methodologies and best practices. Manual testing experience. Familiarity with test case management and defect tracking tools. Programming, coding or development experience is a plus! Experience with any of the following is a plus! Structured Query Language (SQL); Robotic Process Automation; Azure Dev Ops Pipeline; Agile/Scrum environment. We are seeking diversity in all dimensions! Ethnicity, gender, sexual orientation, religion, work experience, volunteer experience and more! Check out more info about the IGNITE Program on our careers site and apply soon. Go to: Internship Opportunities Compensation and Benefits The compensation range for this role is $18.50 to $20.50 per hour. The hourly rate is determined by class year as of Fall 2026 (sophomore, junior, senior) and may also consider additional factors such as skill sets, experience and training, licensure and certifications, and other business and organizational needs. Compensation decisions are dependent on the facts and circumstances of each case. Consumers Credit Union provides eligible employees an opportunity to participate in our medical (High Deductible, HMO and PPO), dental, vision, spending accounts, short-term disability, long-term disability, life insurance and other plans effective date of hire. The internship is a seasonal part time position and is not eligible for most benefits. For more information about benefit offerings, please visit our careers page: about/what-we-do/careers About CCU Founded in 1930 and headquartered in Lake Forest, IL, CCU has $4.3 billion in assets and serves more than 272,000 members, making it one of the largest credit unions in the state. CCU believes that nobody needs banks on every corner, but everyone needs people who are in their corner. We've been recognized as a Great Place to Work multiple years in a row, and we're committed to growing both our business and our people. To learn more, visit myconsumers.org Equal Opportunity Employer CCU complies with the requirements and spirit of the law in the implementation of all facets of equal opportunity in employment. There will be no discrimination on the basis of race, ancestry, color, religion, sex, sexual orientation, gender identity, marital status, pregnancy, age, national origin, citizenship, disability, genetic information, military status (including unfavorable discharge from the military), criminal or arrest history (unless job related), crime victim status, or any other protected characteristic in the recruitment, selection, training, utilization, promotion, termination, or any other employment actions or term and condition of employment. CCU complies with applicable state and local laws governing non-discrimination in employment in every location in which CCU has facilities. We are committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. If reasonable accommodation is needed to participate in the job application or interview process please contact our Human Resources team at: or . Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Are you seeking a challenging intern experience in a dynamic organization and employee-centered culture? Are you interested in working for a growing financial institution where your performance may be recognized? Would you like to join a company that is dedicated to making a noteworthy impact in our community? If you answered "yes" to one or more of these questions, do not miss an opportunity to consider joining our team at FHLB Cincinnati. General Summary: As a Data Engineering Intern you will gain valuable real-world experience through projects with exposure through the senior leadership level. The Data Engineering Intern will be a member of the Data & Analytics Agile scrum team who will assist in the design, development, and testing of Enterprise Data Warehouse. Principal Duties and Responsibilities: Assists in following standard development and enhancement process to ETL pipelines using Azure Data Factory Document data engineering processes, as needed Investigate data related issues by executing SQL queries Qualifications: Knowledge at a level normally acquired through completion of the first three years of a Bachelor's degree from an accredited college or university - preferably in a relevant field of study (i.e. Business Analytics, Data Science, Finance, Economics, Math, or Statistics). Completion of graduate-level coursework a plus Theoretical knowledge of Azure Data Factory such as Datasets, Pipelines, Activities, Tasks, Data Flows. Hands on experience preferred Understanding and writing SQL queries/views Conceptual understanding of Data Warehouse design and modeling Desire to learn and teach data engineering techniques in a collaborative environment on an Agile scrum team Preferred experience utilizing R, SQL, Python and/or Snowflake. Effective verbal and written communication skills Financial aptitude is helpful to understand business processes Working Conditions: Normal hybrid office environment with flexibility. Apply NowShare Save Job

Visa is a world leader in payments and technology, with over 259 billion payments transactions flowing safely between consumers, merchants, financial institutions, and government entities in more than 200 countries and territories each year. Our mission is to connect the world through the most innovative, convenient, reliable, and secure payments network, enabling individuals, businesses, and economies to thrive while driven by a common purpose - to uplift everyone, everywhere by being the best way to pay and be paid. Make an impact with a purpose-driven industry leader. Join us today and experience Life at Visa. Job Description Visa's Internship Program provides an immersive, 12-week journey where you'll work on impactful projects that drive Visa's mission forward. As a Visa intern, you'll build valuable connections across the organization, sharpen your communication and business acumen, and gain hands-on experience in a dynamic, global environment. Throughout the program, you'll have exclusive access to interactive workshops and learning sessions designed to deepen your expertise, expand your industry knowledge, and elevate your professional skillset. You won't just be learning, you'll be contributing, collaborating, and innovating every step of the way. In addition to professional development, you'll enjoy a variety of intern social events that foster community, connection, and fun throughout the summer. The experience culminates in an exciting final presentation, where you'll showcase your project achievements, share key insights, and present your recommendations to Visa's leaders and stakeholders. This is your chance to demonstrate your business impact, highlight your personal growth, and align your work with Visa's vision for the future. The Mobile & Mac Security (MMS) team is looking for a talented Assoc.Cybersecurity Engineer, Internto join our team in Austinand ensure the highest security standards for our Mobile and Mac consumer and corporate products and services. Who are we? The Mobile & Mac Security (MMS) team, part of the overall Cybersecurity department at Visa, Inc. operates as a flexible and fast-paced team, very similarly to a mini startup, within our overall organization. We aim to excel at Whitehat hacking skills to keep our organization secure... and have fun doing it! Who are we looking for? We value diversity within our team and believe that it's who you are and what you do that will make us a better and stronger team. We always cherish differences of opinion, and aim to learn from every team member, no matter their level or experience, in our day-to-day activities. We care about you, what drives you, your motivation and your desire to perform within our team more than any certification or diploma you may have. Those values will be essential focus points for us during the interview so don't hesitate to tell us more about them! As a member of Visa's MMS team, you'll join a dynamic team in order to help: Help develop, maintain, support and innovate on various internal Cybersecurity tools we leverage daily. Innovate and research on AI models and their applications to our cybersecurity world. Develop AI-driven workflows related to all cybersecurity activities we leverage Research AI models and benchmarking specific use-cases Perform ethical penetration testing on various Visa mobile and Mac assets to simulate real-life security vulnerabilities and scenarios. Execute successful adaptation of mobile and Mac security assurance across Visa. Identify weaknesses and shortcomings in Visa's existing security posture of various products and recommend and enhance all necessary controls to effectively protect Visa assets and services from intentional or inadvertent modification. Help build foundational application security capabilities. Develop automated tools and scripts to optimize various testing process and flows. Qualifications Basic Qualifications Students pursuing a Bachelor's or Master's Degree in Computer Science, Computer Engineering, CIS/MIS, Cybersecurity, Business or a related field with a graduation date in December 2026-August 2027 Strong communications skills, specifically, the absence of repeated grammatical or typographical errors, clear and concise written and spoken communications that demonstrate professional judgment. Preferred Qualifications Knowledge of AI related fields and how they work (models, vectoring, prompt engineering, agentic methodologies etc.) Ability to code scripts and small basic applications in Python. Experience with one or more of the following programming languages: Node, Kotlin, Java, Swift is preferred. Understanding of OWASP Top 10 and CWE 25; with proven track record and experience in implementing and integrating remediation strategies. Understand the basics of a mobile application and platform security concepts; deep understanding of those platforms, and advanced concepts related to SDKs and mobile wallets preferred. Knowledge of penetration testing is a plus but not necessary if you're willing to learn with us and are curious. Things like application risk assessment and risk categorization skills, including but not limited to, reverse-engineering, network interception and manipulation, offensive and defensive attacks, as well as database and cross-site scripting injection attacks are all topics that are useful. Understanding of web applications common architectures, basic cryptography, and web protocols. Understanding of thefollowing tools/technologies should apply, and would be strongly preferred: Burp Suite, IDA pro, Metasploit, APKTool, Hopper, Gindra, CheckMarx (Sast/Dast), Cycript, XPosed, Charles, dex2jar, Kali Linux, Wireshark or any mobile security and/or penetration testing tools or frameworks. Strong ability to collaborate Highly driven, resourceful and results oriented Good team player and excellent interpersonal skills Good analytical and problem-solving skills Demonstrated ability to lead and navigate through ambiguity Additional Information U.S. APPLICANTS ONLY:The estimated hourly range for a new hire into this position is $35/hr to $40/hr. The hourly rate may vary depending on job-related factors which may include knowledge, skills, experience, and location. Work Hours:Varies upon the needs of the department. Work Authorization:Visa will not sponsor applicants for work visas in connection with this position. Future sponsorship will not be considered. This is a hybrid position.Expectation of days in office will be confirmed by your hiring manager. Travel Requirements:This position requires travel5-10% of the time. Mental/Physical Requirements:This position will be performed in an office setting. The position will require the incumbent to sit and stand at a desk, communicate in person and by telephone, frequently operate standard office equipment, such as telephones and computers. Visa is an EEO Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. Visa will also consider for employment qualified applicants with criminal histories in a manner consistent with EEOC guidelines and applicable local law. Visa will consider for employment qualified applicants with criminal histories in a manner consistent with applicable local law, including the requirements of Article 49 of the San Francisco Police Code.

The future is what you make it. When you join Honeywell, you become a member of our global team of thinkers, innovators, dreamers and doers who make the things that make the future. As an Integrating Supply Chain (ISC) Manufacturing Intern here at Honeywell, you will have the opportunity to gain hands-on experience in manufacturing operations and develop your guide skills. You will work closely with our manufacturing team to facilitate production activities, ensure quality standards are met, and drive continuous improvement initiatives. This internship will provide you with valuable insights into the world of manufacturing and supply chain management. You will report directly to our ISC Manufacturing Operations Manager, and you will work out of our designated manufacturing facility in Olathe, Kansas. This is a full-time internship position. In this role, you will have the opportunity to: - Learn and apply lean manufacturing ethics to optimize production processes - Work with cross-functional teams to identify and implement process improvements - Assist in monitoring and analyzing production metrics to drive efficiency and productivity - Facilitate the implementation of quality control measures to ensure product quality - Participate in problem-solving activities to address production issues and minimize downtime. Key Responsibilities Working 1:1 with a mentor, you will apply your current skills and learn to: * Facilitate day-to-day manufacturing operations, including production scheduling, material handling, and equipment maintenance. * Assist in monitoring and analyzing production metrics to drive continuous improvement. * Work with cross-functional teams to identify and implement process improvements. * Participate in problem-solving activities to address production issues and minimize downtime. * Facilitate the implementation of quality control measures to ensure product quality. * Learn technical skills such as soldering and troubleshooting equipment. Are you ready to help us make the future? Location: This position is available in Olathe, KS. MINIMUM QUALIFICATIONS: * Be a US Person. * Be enrolled in or have completed at least 1 Career & Technical Education (CTE) course focused on a skilled trade. * Be interested in full-time employment immediately upon high school graduation. * Have earned a high school diploma from one of our partner school districts during the 2025-26 school year: * Blue Valley Schools * Olathe Public Schools Honeywell is currently unable to consider applicants who would require current or future sponsorship for employment authorization for this position. Candidates must be authorized to legally work in the United States without current or future sponsorship requirements. WE VALUE: * Proficient computer skills * Strong problem-solving skills * Self-motivated & responsible * Good communication skills * Ability to set priorities * Ability to work independently and in a team * Knowledge of lean manufacturing ethics and continuous improvement methodologies * Familiarity with production planning and scheduling software * Strong attention to detail and organizational skills Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. #HoneywellURNAM

The future is what you make it. When you join Honeywell, you become a member of our global team of thinkers, innovators, dreamers and doers who make the things that make the future. As an ISC Manufacturing Intern here at Honeywell, you will have the opportunity to gain hands-on experience in manufacturing operations and develop your guide skills. You will work closely with our ISC team to facilitate production activities, ensure quality standards are met, and drive continuous improvement initiatives. This internship will provide you with valuable insights into the world of manufacturing and supply chain management. You will report directly to our ISC Manufacturing Supervisor, and you will work out of our designated manufacturing facility in Redmond, Washington. This is a full-time internship position. In this role, you will have the opportunity to: - Learn and apply lean manufacturing ethics to optimize production processes - Work with cross-functional teams to identify and implement process improvements - Assist in monitoring and analyzing production metrics to drive efficiency and productivity - Facilitate the implementation of quality control measures to ensure product quality - Participate in problem-solving activities to address production issues and minimize downtime. Under immediate supervision, this position is responsible for the assembly of electronic equipment and integration into systems. Performs a variety of tasks ranging from repetitive to non-repetitive production assembly. May conduct quality inspection on processing line in accordance with quality specifications. May disassemble, modify, limited rework, reassemble and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions. At an entry level, follows well defined procedures and is able to read and write English proficiently. Key Responsibilities Working 1:1 with a mentor, you will apply your current skills and learn to: * Facilitate day-to-day manufacturing operations, including production scheduling, material handling, and equipment maintenance. * Assist in monitoring and analyzing production metrics to drive continuous improvement. * Work with cross-functional teams to identify and implement process improvements. * Participate in problem-solving activities to address production issues and minimize downtime. * Facilitate the implementation of quality control measures to ensure product quality. * Receive and follow detailed written instructions on work assignments. * Interface with team members to solve defined issues and complete tasks. Are you ready to help us make the future? Location: This position is available in Redmond, WA. MINIMUM QUALIFICATIONS: * Be a US Person. * Be enrolled in the Aerospace Assembly Specialist program at Lake Washington Institute of Technology. * Be interested in full-time employment immediately upon high school graduation. * Be proficient in reading and writing in the English language. Honeywell is currently unable to consider applicants who would require current or future sponsorship for employment authorization for this position. Candidates must be authorized to legally work in the United States without current or future sponsorship requirements. WE VALUE: * Proficient computer skills * Strong problem-solving skills * Self-motivated & responsible * Good communication skills * Ability to set priorities * Ability to work independently and in a team * Knowledge of lean manufacturing ethics and continuous improvement methodologies * Familiarity with production planning and scheduling software * Strong attention to detail and organizational skills Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. citizen, U.S. permanent resident, or have asylum or refugee status in the U.S. #HoneywellURNAM

Medical Cretex Medical is a family of companies that provides manufacturing and engineering services to medical device OEMs. We offer a complete range of end-to-end manufacturing capabilities, the latest technologies, and the talent to match any manufacturing or engineering challenge. Learn more at ********************** Responsibilities Manufacturing Engineer Intern Position Summary The Manufacturing Engineering intern will be responsible for providing technical support focusing on Manufacturing projects. The intern will assist the Engineering department with projects from scope definition through implementation. This Manufacturing Engineer Intern position will be located in Coon Rapids, MN. This internship will also be an on-site position, working 40 hours/week. Manufacturing Engineer Intern Duties and Responsibilities * Provide internal customer technical support * Part manufacturability technical support * Assist with the implementation of process and design improvements * Support and comply with the company Quality System, ISO, and medical device requirements * Read, understand, and follow work instructions and standard work * Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance * Understand customer needs and the core business markets we serve Qualifications Manufacturing Engineer Intern Qualifications * Enrollment in a four-year degree program for Manufacturing, Mechanical, or Industrial Engineering * Ability to read blueprints * Ability to use measuring devices * Demonstrate excellent interpersonal and team building skills to create effective working coworkers * Ability to follow through on commitments and holds team members accountable * Strong problem-solving skills * Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) * Clear and effective verbal and written communication skills * Attention to detail and organizational skills * Ability to work in a fast-paced team environment * Ability to prioritize and multitask What to Expect from an Internship with Cretex Medical? Each summer, we are excited to offer interns countless opportunities to network, learn more about the Cretex family of businesses, and have fun! Here are some things you'll get to experience as an intern with Cretex Medical and its businesses: * Work with the latest technologies * Challenge yourself and grow your skills * Find opportunities to move across our family of businesses Cretex offers internships in many different areas, including Engineering, Human Resources, Information Technology, Marketing, Accounting, Business, and Production Operations. We encourage you to explore the many internship opportunities Cretex Medical could offer you. Internships are available in a variety of locations within the Minneapolis/St. Paul (Minnesota) metro area, including Elk River, Brooklyn Park, Bloomington, Coon Rapids, Anoka, and Dassel. If you have a location preference, please specify that in the job application questions. Here are some of the things that interns have said about working at Cretex: * "I enjoyed how integrated the interns were in the workflow. We were working on projects that made an impact for the company. I had opportunities to work with employees from all areas of the company as well as other interns." * "During my internship, I gained firsthand experience in project management, quality systems, and manufacturing best practices. I was able to grow my skills in design by focusing on creating more ergonomic processes for manufacturing. I enjoyed the learning experience and the relationships I developed." Cretex Intern Benefits: Cretex offers a wide range of benefits for interns including: * Eligible for Housing Stipend for Relocation * Eligible for Health and Wellness Benefits * Career Development Activities * Opportunities to Interact with Leadership * Company Events * Facility Tours * Summer Intern Event Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* Pay Range USD $25.00 - USD $27.00 /Hr. Company Benefits Benefits: All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.)

Medical Cretex Medical is a family of companies that provides manufacturing and engineering services to medical device OEMs. We offer a complete range of end-to-end manufacturing capabilities, the latest technologies, and the talent to match any manufacturing or engineering challenge. Learn more at ********************** Responsibilities Manufacturing Engineer Intern Position Summary The Manufacturing Engineering intern will be responsible for providing technical support focusing on Manufacturing projects. The intern will assist the Engineering department with projects from scope definition through implementation. This Manufacturing Engineer Intern position will be located in Anoka, MN. This internship will also be an on-site position, working 40 hours/week. Manufacturing Engineer Intern Duties and Responsibilities * Provide internal customer technical support * Part manufacturability technical support * Assist with the implementation of process and design improvements * Support and comply with the company Quality System, ISO, and medical device requirements * Read, understand, and follow work instructions and standard work * Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance * Understand customer needs and the core business markets we serve Qualifications Manufacturing Engineer Intern Qualifications * Enrollment in a four-year degree program for Manufacturing, Mechanical, or Industrial Engineering * Ability to read blueprints * Ability to use measuring devices * Demonstrate excellent interpersonal and team building skills to create effective working coworkers * Ability to follow through on commitments and holds team members accountable * Strong problem-solving skills * Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) * Clear and effective verbal and written communication skills * Attention to detail and organizational skills * Ability to work in a fast-paced team environment * Ability to prioritize and multitask What to Expect from an Internship with Cretex Medical? Each summer, we are excited to offer interns countless opportunities to network, learn more about the Cretex family of businesses, and have fun! Here are some things you'll get to experience as an intern with Cretex Medical and its businesses: * Work with the latest technologies * Challenge yourself and grow your skills * Find opportunities to move across our family of businesses Cretex offers internships in many different areas, including Engineering, Human Resources, Information Technology, Marketing, Accounting, Business, and Production Operations. We encourage you to explore the many internship opportunities Cretex Medical could offer you. Internships are available in a variety of locations within the Minneapolis/St. Paul (Minnesota) metro area, including Elk River, Brooklyn Park, Bloomington, Coon Rapids, Anoka, and Dassel. If you have a location preference, please specify that in the job application questions. Here are some of the things that interns have said about working at Cretex: * "I enjoyed how integrated the interns were in the workflow. We were working on projects that made an impact for the company. I had opportunities to work with employees from all areas of the company as well as other interns." * "During my internship, I gained firsthand experience in project management, quality systems, and manufacturing best practices. I was able to grow my skills in design by focusing on creating more ergonomic processes for manufacturing. I enjoyed the learning experience and the relationships I developed." Cretex Intern Benefits: Cretex offers a wide range of benefits for interns including: * Eligible for Housing Stipend for Relocation * Eligible for Health and Wellness Benefits * Career Development Activities * Opportunities to Interact with Leadership * Company Events * Facility Tours * Summer Intern Event Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* Pay Range USD $25.00 - USD $27.00 /Hr. Company Benefits Benefits: All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.)

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA. We are looking for Manufacturing Engineer to design our build process for scaling our robot fleet. Responsibilities: Set up the internal build line to manufacture module level and full robot system assemblies Analyze and optimize manufacturing processes to improve efficiency, quality, and cost-effectiveness Monitor production metrics and KPIs, identifying areas for improvement and implementing corrective actions Collaborate with cross-functional teams to ensure manufacturability and design for assembly principles are incorporated Qualify vendors for piece part and assembly level manufacturing Set up end of line design validation testing and in process QC checks Develop fixturing to support the assembly Requirements: Experience in manufacturing engineering Expert knowledge of manual and automated assembly techniques Experience with Manufacturing Execution Systems (MES), including implementation, integration, and optimization Expert in 3D CAD software Specify and procure manufacturing equipment, tools, and fixtures required for production Ability to travel up to 40% of the time Bonus Qualifications: Bachelor's or Master's Degree in Mechanical, Biomechanical, Robotics, Mechatronics, or similar field CATIA V6 experience Robotics or other high tech industry experience The US base salary range for this full-time position is between $115,000 - $250,000 annually. The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.

Depending on experience, responsibilities may include: Create new/ Update existing manufacturing process documentation, e.g., tooling lists, setup requirements, operations sequence for manufacturing, standard work, operator performed maintenance Analyze requirements and make recommendations for assembly/machining process improvement, training, equipment needs Provide engineering support to NPI Assembly/Machining groups. Provide support to introduction process of new parts Responsible for process CI (Continuous improvement) cards Work with vendors to purchase items needed for manufacturing, e.g., tooling, gages, etc. Conduct standard work audits Evaluate and recommend changes to existing manufacturing practices in terms of work simplification, process optimization, cost reduction, quality improvement, plant layout and method improvements Create and maintain Perform PFMEAs, SFMEAs, Control Plans Support design-for-assembly/manufacturability (DFA/DFM) projects and initiatives Main point of contact for quality, shop floor and customers Input deviations from non-conforming material to engineering Manage/Follow test lots through value streams for exit inspections/capability studies Champion PPM and scrap reduction Engage in creative problem solving to address operational issues including: ergonomic/ safety, efficiency improvements, process bottlenecks, quality concerns Foster and ensure operations safety at all times. Conduct safety risk assessments Work with internal/external customers and partners to plan, execute and manage projects Coordinate with Operations to define best practices and resolve complex manufacturing issues Work with operations, tool design, programmers, engineers etc. to ensure proper development, implementation and support of engineering activities Provide technical and analytical support as needed. Provide guidance and make critical decisions Train operators on the standard work and develop training programs REQUIREMENTS Bachelor's degree in Manufacturing, Industrial, Mechanical Engineering or similar field is required Must have 2+ years of experience in the manufacturing industry Basic knowledge of processing (machining/assembly ops), fixture design, and programming is required, experience preferred Must have good blueprint reading skills and experience with GD&T Analytical, technical, and problem solving skills High energy and a demonstrated ability to implement and get results are essential Detail oriented with troubleshooting and project leadership skills Strong ability to handle a high workload and manage priorities is required Strong written and verbal communication skills required Must be self-directed, self-starter, and be able to multi-task and prioritize Must enjoy working in a team environment, and have strong interpersonal and collaboration skills Candidates must be authorized to work in the United States. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer.

Provide support to production and assure optimum utilization of production facilities and personnel. Primary objectives include creation of Standard Work documentation and performing Risk Assessments for processes related to the machining and assembly team. Depending on experience, responsibilities may include: Creating Standard Work documentation Experience assessing safety & ergonomic risks Good industrial background Understanding of manufacturing processes Desire to work in a fast-paced environment Computer Skills (PowerPoint, Excel and Word) Technical writing experience Experience with SFMEA Daily in-person interaction with the operations team, manufacturing engineers, and safety professionals. REQUIREMENTS: Bachelor or Associate degree in Industrial Engineering or similar field is preferred, Must have 5+ years of experience working in the manufacturing industry Knowledge of manufacturing operations (machining, assembly) is required Candidates must be proficient in Microsoft Office applications and general computer software Strong ability to handle multiple tasks and manage priorities is required Must be self-directed, self-starter, and be able to multi-task High energy and a demonstrated ability to implement and get results are essential Strong written and verbal communication skills required Must enjoy working in a team environment, and have strong interpersonal and collaboration skills Ability to read, understand and follow regulations and procedures is required Ability to listen to others is important for this job Professional attitude, willingness to learn is required Candidates must be authorized to work in the United States. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer.

Medical Cretex Medical is a leading contract manufacturer of precision components and assemblies for the medical device industry. Our customers view us as a trusted partner in the areas of injection molding, laser processing, metal stamping and device assembly. Learn more at ********************** Manufacturing Engineer - Nitinol Products Position Summary The Manufacturing Engineer will be responsible for leading the development and deployment of manufacturing processes of Nitinol based products. and implementation of improvements including cost, manufacturability, and quality goals. Responsible for planning, designing, developing, and maintaining manufacturing processes. Provide direction and support once products are deployed into production including support to the Manufacturing organization to facilitate efficient operations within the production area, to optimize existing processes and to ensure that production goals are met. ***Position is open to Manufacturing Engineer level I, II or III based on experience. Responsibilities • Initiate and complete technical activities for new or improved Nitinol processes or design for manufacturability for current and next generation programs • Hands on position to design, develop, and validate Nitinol based manufacturing processes • Ability to read and interpret engineering drawings; ability to design tooling and fixtures in 3D CAD Software • Coordinate fabrication and implementation of process fixturing or gauging • Interface with quality and manufacturing to integrate new products or processes into production to meet strategic goals and objectives of the company • Create, maintain and approve device routers, manufacturing procedures, and bill of materials • Monitor performance of equipment, machines, and tools and corrects equipment problems or process parameters that produce non-conforming products, low yields, or product quality issues • Resolve non-conformances and participates on Material Review Board • Analyze and map processes, assesses efficiency, and implements complex project activities • Mentor Engineer I and II and Technicians (Mfg Eng III) • Support and comply with the company Quality System, ISO, and medical device requirements • Read, understand, and follow work instructions and standard work • Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance • Understand customer needs and the core business markets we serve Qualifications • Bachelors Degree in Mechanical, Biomedical, or Material Science Engineering Mfg Eng II: 3+ years of engineering experience in a manufacturing setting Mfg Eng III: 5+ years of engineering experience in a manufacturing setting • 1+ years of engineering experience in a Nitinol manufacturing setting; including state of the art manufacturing technology/concepts and cost reductions is preferred • Fundamental understanding of the properties and behaviors of Nitinol • In depth understanding of Nitinol related processes with emphasis on Shape Setting • Experience with 3D CAD Software (i.e. Solidworks) • Team dynamic skills (communication, accountability, decision-making, feedback, meeting management, managing conflict) • DOE, SPC, FMEA, GDP, QSR, GD&T, ANOVA • Experience with statistical softwares (i.e. Minitab, Excel SPC, etc.) • Project management experience • Excellent communication and influencing skills • High level of energy, personal accountability, and integrity • Highly detail oriented; checks own work, keeps accurate records, organizes data effectively • Ability to tolerate ambiguity, multiple priorities, and short deadlines • Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher) • Experience in an ISO13485/GMP environment • Ability to work in a fast-paced team environment, prioritize work and multitask Preferred Knowledge, Skills and Abilities • Masters Degree in Mechanical, Biomedical, or Material Science Engineering • 5+ years of engineering experience in a Nitinol manufacturing setting; including state of the art manufacturing technology/concepts and cost reductions • Experience with testing Nitinol material for Af, tensile, fatigue, cyclic loading, and corrosion • Continuing Education; including participation in local chapters, associations, and/or organizations What is it like to work at Cretex Medical? We recognize the contribution of every individual and promote growth, safety and security for all our employees. Cretex Medical values performance and pays competitive wages along with a rich benefit package. We offer a positive work environment with a focus on continuous improvement. Here are some of things that employees have said about working for Cretex Medical: “The culture at Cretex is collaborative. Everyone here is willing to help you whether it is a director, a machinist, or your boss. Everyone is always willing to help you figure out a project and get it done right.” “I would tell potential interns that Cretex is a great company to work for. It has set a high bar for corporate culture as well as the quality of work you can do. I would definitely recommend it.” “I learned that I really like the medical device industry. The importance and the gravity of what we do here is felt by the employees. You can have that passion in your work because you know what you are striving for is to save lives.” We encourage you to explore the many opportunities Cretex Medical can offer you as a valued team member. Pay Range USD $68,200.00 - USD $136,200.00 /Yr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Manufacturing Engineer I $ 66,900 - $ 100,300 Manufacturing Engineer II $ 73,600 - $ 110,400 Manufacturing Engineer III $ 89,000 - $ 133,600 Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Medical Cretex Medical is a leading contract manufacturer of precision components and assemblies for the medical device industry. Our customers view us as a trusted partner in the areas of injection molding, laser processing, metal stamping and device assembly. Learn more at ********************** Manufacturing Engineer - Nitinol Products Position Summary The Manufacturing Engineer will be responsible for leading the development and deployment of manufacturing processes of Nitinol based products. and implementation of improvements including cost, manufacturability, and quality goals. Responsible for planning, designing, developing, and maintaining manufacturing processes. Provide direction and support once products are deployed into production including support to the Manufacturing organization to facilitate efficient operations within the production area, to optimize existing processes and to ensure that production goals are met. * Position is open to Manufacturing Engineer level I, II or III based on experience. Responsibilities * Initiate and complete technical activities for new or improved Nitinol processes or design for manufacturability for current and next generation programs • Hands on position to design, develop, and validate Nitinol based manufacturing processes• Ability to read and interpret engineering drawings; ability to design tooling and fixtures in 3D CAD Software• Coordinate fabrication and implementation of process fixturing or gauging• Interface with quality and manufacturing to integrate new products or processes into production to meet strategic goals and objectives of the company• Create, maintain and approve device routers, manufacturing procedures, and bill of materials • Monitor performance of equipment, machines, and tools and corrects equipment problems or process parameters that produce non-conforming products, low yields, or product quality issues• Resolve non-conformances and participates on Material Review Board• Analyze and map processes, assesses efficiency, and implements complex project activities• Mentor Engineer I and II and Technicians (Mfg Eng III)• Support and comply with the company Quality System, ISO, and medical device requirements• Read, understand, and follow work instructions and standard work• Partner with other business segments: sales/marketing, customer service, engineering, quality, and finance• Understand customer needs and the core business markets we serve Qualifications * Bachelors Degree in Mechanical, Biomedical, or Material Science Engineering * Mfg Eng II: 3+ years of engineering experience in a manufacturing setting * Mfg Eng III: 5+ years of engineering experience in a manufacturing setting * 1+ years of engineering experience in a Nitinol manufacturing setting; including state of the art manufacturing technology/concepts and cost reductions is preferred• Fundamental understanding of the properties and behaviors of Nitinol• In depth understanding of Nitinol related processes with emphasis on Shape Setting• Experience with 3D CAD Software (i.e. Solidworks)• Team dynamic skills (communication, accountability, decision-making, feedback, meeting management, managing conflict)• DOE, SPC, FMEA, GDP, QSR, GD&T, ANOVA• Experience with statistical softwares (i.e. Minitab, Excel SPC, etc.)• Project management experience• Excellent communication and influencing skills• High level of energy, personal accountability, and integrity• Highly detail oriented; checks own work, keeps accurate records, organizes data effectively• Ability to tolerate ambiguity, multiple priorities, and short deadlines• Microsoft Office proficiency (Outlook, Word, Excel, PowerPoint, Publisher)• Experience in an ISO13485/GMP environment • Ability to work in a fast-paced team environment, prioritize work and multitask Preferred Knowledge, Skills and Abilities * Masters Degree in Mechanical, Biomedical, or Material Science Engineering• 5+ years of engineering experience in a Nitinol manufacturing setting; including state of the art manufacturing technology/concepts and cost reductions • Experience with testing Nitinol material for Af, tensile, fatigue, cyclic loading, and corrosion• Continuing Education; including participation in local chapters, associations, and/or organizations What is it like to work at Cretex Medical? We recognize the contribution of every individual and promote growth, safety and security for all our employees. Cretex Medical values performance and pays competitive wages along with a rich benefit package. We offer a positive work environment with a focus on continuous improvement. Here are some of things that employees have said about working for Cretex Medical: "The culture at Cretex is collaborative. Everyone here is willing to help you whether it is a director, a machinist, or your boss. Everyone is always willing to help you figure out a project and get it done right." "I would tell potential interns that Cretex is a great company to work for. It has set a high bar for corporate culture as well as the quality of work you can do. I would definitely recommend it." "I learned that I really like the medical device industry. The importance and the gravity of what we do here is felt by the employees. You can have that passion in your work because you know what you are striving for is to save lives." We encourage you to explore the many opportunities Cretex Medical can offer you as a valued team member. Pay Range USD $68,200.00 - USD $136,200.00 /Yr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Manufacturing Engineer I $ 66,900 - $ 100,300 Manufacturing Engineer II $ 73,600 - $ 110,400 Manufacturing Engineer III $ 89,000 - $ 133,600 Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Medical Cretex Medical is a leading contract manufacturer of precision components and assemblies for the medical device industry. Our customers view us as a trusted partner in the areas of injection molding, laser processing, metal stamping and device assembly. Learn more at ********************** Manufacturing Engineer II Position Summary The Manufacturing Engineer II provides support to the Medical Plastic Injection Molding Manufacturing organization to facilitate efficient operations within the production area, to optimize existing processes and to ensure that production goals are met. Responsibilities * Initiate and complete technical activities leading to new or improved products or processes for current and next generation programs and to meet strategic goals and objectives of the company. * Analyze and solve problems from basic engineering principles, theories and concepts through to a wide range of complex and advanced problems which require novel and innovative approaches or a breakthrough technology. * Confer with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards * Lead in the installation, debug, validation, and training of new work cells - including acceptance testing of new equipment/automation/fixtures. etc * Create, maintain and approve device routers/BOMs * Create, maintain and approve manufacturing procedures * Design, coordinate fabrication and implements process fixturing or gauging fixtures, equipment, automation, EOAT, Vision systems, Gages * Resolve non-conformances and participates on Material Review Board * Analyze and map processes, assess efficiency, and implement complex project activities * Oversees equipment installation, modification, training and preventative maintenance development Qualifications * Bachelor's Degree: Engineering (Manufacturing, Mechanical, Industrial) * 3+ years of engineering experience in an injection molding manufacturing setting with a strong preference towards medical molding and cleanroom operations. * Medical Device experience required * Manufacturing process design and validation, perform DOE's, IQ-PQ Validations * Manufacturing equipment and fixture/gage design * Lean manufacturing, including statistical analysis and 5S * Manufacturing automation, including electronic visual inspection, PLC programming, Packaging development, testing and approval * 3D CAD software (i.e. ProE, Unigraphics, Solidworks, etc.) * High level of energy, personal accountability and integrity * Ability to tolerate ambiguity, multiple priorities and short deadlines * Ability to travel overnight, by land or air * Ability to consistently achieve short and long term business results * Ability to prioritize work and manage multiple tasks when needed * Attention to detail * Good communication skills * Strong problem solving skills Manufacturing Engineer II Preferred Knowledge, Skills and Abilities * Supervisory experience * Continuing Education; including participation in local chapters, associations, and/or organizations Pay Range USD $75,000.00 - USD $112,600.00 /Yr. Pay Range Details This pay range reflects the base hourly rate or annual salary for positions within this job grade, based on our market-based pay structures. Actual compensation will depend on factors such as skills, relevant experience, education, internal equity, business needs, and local market conditions. While the full hiring range is shared for transparency, offers are rarely made at the minimum or maximum of the range. Company Benefits All Employees: Our 401k retirement savings plan with a company match contribution; onsite health clinics, discretionary holiday bonus program (based on years of service), Cretex University, 24/7 employee assistance program with access to five confidential visits with a licensed counselor at no cost, wellness program with incentives, an employee death benefit, and employee sick and safe leave are available to all Cretex employees. 20+hours: Cretex's medical benefit package includes: comprehensive medical insurance with access to virtual providers; dental insurance (Little Partners Dental benefit covers services 100 percent for children 12 and younger when seen by a Health Partners in network provider); vision insurance; a pre-tax health savings account, healthcare and dependent care pre-tax reimbursement accounts; paid holidays, paid time off; and our discretionary profit sharing program are available to employees working 20+ hours/week. 30+ hours: Parental Leave, accident and critical illness benefits, optional employee, spouse, and child life; short and long term disability; company provided life insurance; and tuition assistance programs are available to employees working 30+ hours per week. (Some benefits are subject to eligibility criteria.) Applicants will receive consideration for employment regardless of their race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, veteran status, marital status, family status, status with regard to public assistance, or any other protected status as required by law. Our company uses E-Verify to confirm the employment and eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit *********************

Job Title Manufacturing Engineer Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career The Impact You'll Make in this Role As a Manufacturing Engineer, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: * Initiates, identifies, recommends, and leads projects in the manufacturing area of responsibility to improve product cost, service, quality, process safety and health/environmental impact * Responsible for performing and guiding technical activities resulting from approved, self-initiated, or assigned manufacturing programs leading to innovative applications and extensions of existing or new products/technologies having major importance to the business * Actively participate in the day-to-day operations, specifically daily tier process, MOC process (change management), KPI determination, reporting and analysis leading to resolution of any gaps in performance * Lead improvement projects and problem-solving events to determine root causes for problems that occur and implement permanent long-term solutions to resolve those problems, (CAPA). * Monitor and improve manufacturing operations using Lean Six Sigma tools and methodology (design of experiments, statistical process control, lean management system, kaizens, DMAIC) * Drive process understanding (PPU) efforts and product change processes to support business portfolio needs. * Work closely with production and maintenance teams to perform troubleshooting activities and resolve equipment/downtime issues. * Utilize strong communication skills to inspire, influence, motivate and teach other team members. Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: * Bachelor's degree in engineering or science discipline (completed and verified prior to start) from an accredited institution. * Two (2) years of manufacturing engineering experience in a private, public, government or military environment Additional qualifications that could help you succeed even further in this role include: * Three (3) years of manufacturing engineering experience in a private, public, government or military environment * Experience with Non-Woven and/or abrasives manufacturing * Experience in urethane and epoxy chemistry * Experience with applied data analysis and/or statistical process control (SPC) * Continuous Improvement and/or LEAN systems development, implementation, and execution Work location: * Work location: This role follows an on-site working model, requiring the employee to work at least four days a week at the Oak Hills manufacturing plant in Oak Hills, CA. Travel: May include up to 10% domestic Relocation: May be authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $98,413 - $120,282, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** Good Faith Posting Date Range 01/14/2026 To 02/13/2026 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Job Title Manufacturing Engineer Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career The Impact You'll Make in this Role As a Manufacturing Engineer, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by: Initiates, identifies, recommends, and leads projects in the manufacturing area of responsibility to improve product cost, service, quality, process safety and health/environmental impact Responsible for performing and guiding technical activities resulting from approved, self-initiated, or assigned manufacturing programs leading to innovative applications and extensions of existing or new products/technologies having major importance to the business Actively participate in the day-to-day operations, specifically daily tier process, MOC process (change management), KPI determination, reporting and analysis leading to resolution of any gaps in performance Lead improvement projects and problem-solving events to determine root causes for problems that occur and implement permanent long-term solutions to resolve those problems, (CAPA). Monitor and improve manufacturing operations using Lean Six Sigma tools and methodology (design of experiments, statistical process control, lean management system, kaizens, DMAIC) Drive process understanding (PPU) efforts and product change processes to support business portfolio needs. Work closely with production and maintenance teams to perform troubleshooting activities and resolve equipment/downtime issues. Utilize strong communication skills to inspire, influence, motivate and teach other team members. Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: Bachelor's degree in engineering or science discipline (completed and verified prior to start) from an accredited institution. Two (2) years of manufacturing engineering experience in a private, public, government or military environment Additional qualifications that could help you succeed even further in this role include: Three (3) years of manufacturing engineering experience in a private, public, government or military environment Experience with Non-Woven and/or abrasives manufacturing Experience in urethane and epoxy chemistry Experience with applied data analysis and/or statistical process control (SPC) Continuous Improvement and/or LEAN systems development, implementation, and execution Work location: Work location: This role follows an on-site working model, requiring the employee to work at least four days a week at the Oak Hills manufacturing plant in Oak Hills, CA. Travel: May include up to 10% domestic Relocation: May be authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. Applicable to US Applicants Only:The expected compensation range for this position is $98,413 - $120,282, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: ******************************************************************* Faith Posting Date Range 01/14/2026 To 02/13/2026 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M.Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M.Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement.Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.