Service Technician jobs at Edmonson Electric

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

Permit Coordinator - St. Cloud, Florida A WORLD LEADER IN TESTING, INSPECTION & CERTIFICATION SERVICES Bureau Veritas offers dynamic, exciting employment opportunities with an attractive salary/benefit package and an opportunity to play a vital role with a global organization. If you would enjoy working in a dynamic environment and are looking for an opportunity to become part of a stellar team of professionals, we invite you to apply online today. Bureau Veritas is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, citizen status, sexual orientation, genetics, status as a protected veteran, or any other non-job-related characteristics. The Permit Coordinator is responsible for inspection scheduling, inspection reporting, and plan review processing, while completing organizational and administrative tasks to support the department's daily operations. Strong attention to detail and organizational abilities are needed to successfully sort and keep track of various time-sensitive tasks. The Permit Coordinator must be able to apply problem-solving and critical thinking skills for problem resolution when conflicts arise. Essential Duties and Responsibilities include the following. Other duties may be assigned. Process inspection requests and schedule inspections following company established procedures. Provides support for administrative functions in the assigned department. Answers incoming calls; processes mail, faxes, copying, FedEx shipments, etc. Manages the workload to ensure all tasks are completed within the established timeframes. Process final packets for Certificates of Occupancy or Completion. Assists clients to meet construction goals and timeframes. Identify and report conflicts or issues with scheduling and/or company databases. Communicates scheduling changes with staff and clients. Performs data entry and maintenance of company databases, directories and records. Performs a variety of essential record keeping duties, and maintains department record keeping and filing systems Process plans for review, acting as liaison between staff and client Assists with any other duty that is required to ensure inspections are scheduled and reported accurately. Performs other related duties, as directed. NOTE: Management retains the discretion to add to or change the duties of the position at any time. Experience: High school graduate with, at least, 3 years of office experience General knowledge of the Construction Industry Proficient with Microsoft Office programs Excellent communication skills with high level of English proficiency, both written and verbal, with an exhibited high level of professionalism. Extreme attention to detail, organizational and time management skills Skills: Knowledge of general office equipment- copier/fax/scanner, phone Problem-solving abilities Excellent customer service skills Must be able to understand and follow instructions Ability to work well with others in a collaborative team environment High energy level and able to work in a fast paced environment Computer Skills: Demonstrated knowledge of a variety of computer software applications in word processing, spreadsheets, document and database software (Outlook, Word, Excel, Adobe Acrobat). Work Environment: An employee in this position typically works in an office environment with controlled climate. Outside office travel is limited. Physical Demands: While performing the duties of this Job, the employee is regularly required to sit and work with computer systems for extended periods of time. The employee is occasionally required to lift up to 20 pounds. The vision requirements include: ability to adjust focus, distance vision and close vision.

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Free uniforms Health insurance Paid time off Training & development Service Lead TechnicianPalm Beach Electronics West Palm Beach, FL Pay: $25-35 per hour (based on experience) Schedule: Full-time | MondayFriday, 7:45am 4:15pm (30-minute lunch) About Us At Palm Beach Electronics, we believe technology should make life simpler, safer, and more fun. Thats why we specialize in smart home automation, high-performance audio/video, advanced security systems, outdoor lighting, and next-generation wiring and integration. By implementing the newest technology and products, we create seamless, reliable systems that bring comfort and convenience to our clients homes and businesses. As a family-oriented, highly rated company, we take pride in combining innovation with personalized service to design spaces that work beautifully and effortlessly. Job Summary We are looking for a skilled and motivated Service Technician to join our team. This role focuses on servicing and supporting our advanced audio/video and home automation systems. The right candidate will have strong troubleshooting skills, solid networking knowledge, and a customer-first attitude. Youll be working hands-on with a wide variety of AV equipment and control systems, ensuring every client receives top-notch service. This position offers the chance to grow your expertise, gain ongoing training, and be part of a company that values integrity, teamwork, and professional development. Responsibilities Provide on-site service, troubleshooting, and support for installed AV and automation systems. Configure, maintain, and optimize Control4 and Lutron control systems and networking equipment. Diagnose and repair issues with AV receivers, distributed audio, video distribution, lighting control, shades, surveillance, and related technologies. Collaborate with project managers, programmers, and installers to ensure seamless service delivery. Deliver excellent customer service, ensuring client satisfaction with every visit. Document service calls, updates, and system changes. Requirements 35 years of experience in the AV and custom electronics industry. Strong expertise with Control4 and Lutron (programming, deployment, and troubleshooting). Control 4 and Lutron certififications Solid networking knowledge (routers, switches, wireless systems, VLANs, IP configuration). Familiarity with other systems (Lutron, Sonos, Savant, Crestron, etc.) a plus. Ability to read and interpret technical diagrams and documentation. Strong problem-solving skills and ability to work independently. Excellent communication skills and professional client-facing demeanor. Valid drivers license and reliable transportation. Must be drug free and able to pass screenings. Benefits Competitive salary based on experience. Paid vacation. Partial paid health insurance. Matching 401(k). Ongoing training and certification opportunities. Career growth within a supportive, innovative company.

Benefits: * Dental insurance * Health insurance * Paid time off * Vision insurance Company Overview: W.W. Gay Mechanical Controls and Integration, a leading Building Control Systems Integration Company in Jacksonville, FL, is seeking a talented Senior HVAC Controls Engineer. Our team is growing, and we are looking for a professional with at least five years of experience in major manufacturers' BMS control products. Preferred systems include Honeywell Webs, KMC Controls, Tridium Niagara AX/N4, and JCI FX. If you have the expertise to manage installations, terminations, programming, start-ups, and commissioning of DDC HVAC Building Control Systems with minimal supervision, we want to hear from you. Key Responsibilities: * Project Management: Oversee field start-up activities for construction projects, including field programming, system start-up, documentation, system acceptance, client training, and warranty calls. * System Commissioning: Under the technical manager's guidance, perform software start-up and commissioning of complete control systems under operational conditions and simulated seasonal changes. * Quality Assurance: Ensure installed programs meet the project's sequence of operations and that all controllers function correctly. * User Interface Installation: Install, test, and field-verify a complete Graphical User Interface, providing end-user training on using web-based graphics to control the system. * Programming Adjustments: Make necessary programming corrections to account for field conditions, maintain field reports, and update as-built documentation. * Dynamic Testing: Conduct dynamic testing of all installed hardware and software. * Regulatory Compliance: Ensure uniform and proper installation of controls per company and National Electric Code standards and verify compliance with OSHA and company regulations. * Documentation: Maintain accurate checkout sheets and update as-built documentation for timely production of O&Ms. * Continuous Learning: Stay current with technical enhancements and new product developments through company-provided training. * Team Supervision: Supervise project team members to ensure efficient work within the project scope. * Flexibility: Willingness to travel and work outside normal hours as required. Minimum Requirements: * Punctual, organized, reliable, and self-motivated. * Proficient in Microsoft Office Suite (Excel, Visio, Word). * Basic knowledge of electronic circuits and electrical systems, with the ability to understand wiring diagrams and circuits. * Strong verbal and written communication skills. * Experience in temperature control systems, HVAC systems, DDC controls, HVAC electronics, running conduit, and terminating wiring. * Valid driver's license with a clean driving record and reliable vehicle. * Must pass a criminal background check and be subject to random drug screening. * Ability to work in large-scale construction sites, understanding personal safety, and adapting to changing job locations. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. For more than 60 years, W. W. Gay has been more than just a leader in mechanical contracting. We have been a place where hardworking professionals build lasting and fulfilling careers. Our success comes from people with integrity, strong character, and a team-first mindset, and we are looking for more individuals like you to join our growing team. Many of our employees choose to stay with us through retirement, finding purpose and opportunity in every project. Whether your skills are in project management, preconstruction, administration, safety, or the trades including plumbing, HVAC, and pipefitting, there is a path forward for you here. As a full-service mechanical contractor since 1962, W.W. Gay is proud to deliver innovative solutions with transparency, efficiency, and a name our clients can trust. What Sets Us Apart * 24/7 HVAC and Plumbing Service * Licensed in multiple states * Financial stability and bonding capabilities of $100 million single project/$350 million aggregate * Leadership within 9 office locations throughout Florida and Georgia * Yearly Service Agreements and Preventative Maintenance * Fleet of over 400 vehicles company-wide * Crane and Construction Equipment (bare and operated) At W.W. Gay, you will find stability, opportunity, and the chance to make an impact every day. W.W. Gay is an Equal Opportunity Employer.

Benefits: Dental insurance Health insurance Paid time off Vision insurance Company Overview: W.W. Gay Mechanical Controls and Integration, a leading Building Control Systems Integration Company in Jacksonville, FL, is seeking a talented Senior HVAC Controls Engineer. Our team is growing, and we are looking for a professional with at least five years of experience in major manufacturers' BMS control products. Preferred systems include Honeywell Webs, KMC Controls, Tridium Niagara AX/N4, and JCI FX. If you have the expertise to manage installations, terminations, programming, start-ups, and commissioning of DDC HVAC Building Control Systems with minimal supervision, we want to hear from you. Key Responsibilities: Project Management: Oversee field start-up activities for construction projects, including field programming, system start-up, documentation, system acceptance, client training, and warranty calls. System Commissioning: Under the technical manager's guidance, perform software start-up and commissioning of complete control systems under operational conditions and simulated seasonal changes. Quality Assurance: Ensure installed programs meet the project's sequence of operations and that all controllers function correctly. User Interface Installation: Install, test, and field-verify a complete Graphical User Interface, providing end-user training on using web-based graphics to control the system. Programming Adjustments: Make necessary programming corrections to account for field conditions, maintain field reports, and update as-built documentation. Dynamic Testing: Conduct dynamic testing of all installed hardware and software. Regulatory Compliance: Ensure uniform and proper installation of controls per company and National Electric Code standards and verify compliance with OSHA and company regulations. Documentation: Maintain accurate checkout sheets and update as-built documentation for timely production of O&Ms. Continuous Learning: Stay current with technical enhancements and new product developments through company-provided training. Team Supervision: Supervise project team members to ensure efficient work within the project scope. Flexibility: Willingness to travel and work outside normal hours as required. Minimum Requirements: Punctual, organized, reliable, and self-motivated. Proficient in Microsoft Office Suite (Excel, Visio, Word). Basic knowledge of electronic circuits and electrical systems, with the ability to understand wiring diagrams and circuits. Strong verbal and written communication skills. Experience in temperature control systems, HVAC systems, DDC controls, HVAC electronics, running conduit, and terminating wiring. Valid driver's license with a clean driving record and reliable vehicle. Must pass a criminal background check and be subject to random drug screening. Ability to work in large-scale construction sites, understanding personal safety, and adapting to changing job locations. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. For more than 60 years, W. W. Gay has been more than just a leader in mechanical contracting. We have been a place where hardworking professionals build lasting and fulfilling careers. Our success comes from people with integrity, strong character, and a team-first mindset, and we are looking for more individuals like you to join our growing team. Many of our employees choose to stay with us through retirement, finding purpose and opportunity in every project. Whether your skills are in project management, preconstruction, administration, safety, or the trades including plumbing, HVAC, and pipefitting, there is a path forward for you here. As a full-service mechanical contractor since 1962, W.W. Gay is proud to deliver innovative solutions with transparency, efficiency, and a name our clients can trust. What Sets Us Apart • 24/7 HVAC and Plumbing Service • Licensed in multiple states • Financial stability and bonding capabilities of $100 million single project/$350 million aggregate • Leadership within 9 office locations throughout Florida and Georgia • Yearly Service Agreements and Preventative Maintenance • Fleet of over 400 vehicles company-wide • Crane and Construction Equipment (bare and operated) At W.W. Gay, you will find stability, opportunity, and the chance to make an impact every day. W.W. Gay is an Equal Opportunity Employer.

We are seeking individuals with boundless energy, unwavering persistence, and an appetite for learning. We value individuals who approach challenges with enthusiasm and creativity. If you're ready to embark on a journey of continuous growth and contribute to meaningful solutions, we want you on our team. As a Valve Service Technician, you will work in a shop atmosphere. Your daily responsibilities of this role include assembling new automated/control valves. You will be an essential part of the success of AWC, completing each function properly and exceeding our customers expectations. How you'll make an impact: Assemble and calibrate automation and control valve packages, ensuring precision and functionality. Analyze valve problems and choose corrective action. Read and interpret schematics for assembly, repair and reassembly as required. Work meticulously within tight tolerances to ensure product quality and performance. Read drawings, job orders, tooling instructions, or standard charts to execute tasks accurately. Maintain a strong commitment to quality and safety to avoid rejections and ensure a safe working environment. Thrive in a fast-paced environment and consistently meet critical deadlines. Contribute to ongoing efforts to enhance output, quality, and delivery through continuous improvement initiatives. Possess knowledgeable in bolt torquing techniques to ensure proper valve assembly. Ability to work in a shop atmosphere and outside in customer owned facilities, delivering top-notch service. Skills you'll need: Knowledge of process valves Strong mechanical aptitude Capable of working in both independent and team settings Ability to read and understand drawings Proficient in the use of measurement devices i.e., vernier calipers Ability to work with minimal supervision Possess knowledge of and safely use basic hand tools for valve maintenance. Dedication to a safe work environment Excellent communication skills, enabling clear and concise interaction with colleagues and clients High School Diploma or GED Have at least 2 years of valve assembly, repair, testing, reconditioning or modification experience Ability to work Monday - Friday 8am - 5pm Willingness to work nights and/or weekends as determined by project/company needs Physical Demands: Must be able to move and or lift parts up to 40 lbs. Ability to stand, stoop, kneel, squat, reach lift and carry Ability to operate power equipment such as lift trucks or hand trucks Ability to pass and maintain a clear DISA background and Drug Screen The Rewards: Employee Stock Ownership Plan (ESOP) 401(K) Match Competitive Pay Medical, Dental and Vision Insurance Package Employer Paid Life Insurance Paid Time Off and Holiday Pay Career Development Opportunities About AWC As employee-owners, we strive to do more than just complete tasks; we seek to develop fulfilling careers by pushing ourselves and questioning the status quo. We embrace innovative and creative methods to expand our expertise while providing genuine value to our customers and technology partners. We strategically partner with the world's most-recognized brands to help engineering, reliability, and maintenance teams solve problems effectively. As experts in our partners' technologies, we are well-equipped to properly size, select, configure, and support each. It is our goal to serve you with the best combination of caring experts and innovative solutions from our partners. How We Win Together We are committed to solving customer problems and are looking for team members that want to be a trusted resource to those looking for a partner who out-knows, out-cares, and out-serves everyone else. Every day, we strive to deliver on our mission to empower people to make the greatest positive impact for the communities and families we serve together. Our Winning Together culture starts with a shared commitment to building an environment of inclusiveness, trust, and mutual respect. We know that when people like you are safe to pursue your passions, to learn, to serve, and to share in the rewards from our combined efforts, then we are winning together.

Job Details FL Alachua - Alachua, FL Full Time Not Specified $23.34 None Day Installation - Maint - RepairDescription Under the direction of the Manager/Supervisor, the Plant Maintenance Tech will be responsible for fabricating or repairing products by welding metal components together using arc and gas welding equipment, cutting out forms. Essential Functions: Weld metal parts together using gas welding and any combination of arc welding processes in a safe manner. Perform related tasks such as thermal cutting and/or grinding in a safe manner. Repair broken or cracked parts, fill holes, and/or increase or decrease the sizes of metal parts. Have the ability to turn on power units, air units, and welding equipment, preparing all for daily production specifications. Measure, position and clamp together components of fabricated metal products preparatory to welding. Read blueprints and/or required company production orders and to determine what the job specifications as well as those requirements needed to complete the production orders. Check and correctly inventory material in holding bins for future orders. Communicate with your management team for those changes that may be needed or required unexpectedly. Finish daily shift production without excess waste. Maintain radio contact with supervisor. Have the ability to help out in plant when needed. Perform cleanup and required housekeeping duties; sweep floor; shovel excess debris, while using the required PPE, as well as having the ability to be trained in the use of LOTO during maintenance. Operate any and all necessary equipment that may be needed to perform a particular job. Perform any and all safety related duties as required by management. Note: Other duties and special projects as requested. Minimum Education and Experience High school diploma or GED; 1-3 years of welding experience or training. Qualifications Knowledge, Skills and Abilities Safety is a condition of employment. Good personal safety record with the ability to abide by all facility safety standards; Quality orientation; Proficient in reading, writing, math, and operational logic; Have extensive product, and equipment knowledge; Excellent communication skills; Able to handle various details in a stressful situation; Self-starter with a very high standard of expectation for self; Positive attitude toward other employees, customers, and supervisors; Excellent work ethic - punctuality, accuracy, attendance.

Job Description We are hiring immediately for a FULL TIME SERVICE TECHNICIAN position. Location:Quantum-6715 Plantation Road Pensacola 32504(Openings at other locations within school district available) Note: online applications accepted only. Schedule: FT; More information upon interview. Requirement: Experience required. Pay Range: $25.00 per hour to $52.00 per hour The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: *************************** Skg Quantum North America is a leading design-build firm specializing in Mechanical, Electrical, Plumbing, Installation, and Energy Engineering solutions. Since 2003, we've delivered reliable, cost-effective services across diverse markets nationwide. Headquartered in Dallas/Fort Worth, our team of 125+ professionals-including engineers, project managers, certified technicians, and skilled tradespeople-drives our consistent growth and reputation for excellence. With over 125 projects completed annually and operations in 30 states, we offer a collaborative, accountable work environment where innovation and client satisfaction are at the core of everything we do. As a member of Compass Group, North America, we want you to be as great as you can be. We empower our associates to direct their own future, keeping them confident that we support them every step of the way. As a result, our associates embody greatness through their actions, natural passion for quality, and a can-do attitude. The opportunity for greatness is real at Quantum North America and throughout the Compass world. Job Summary Summary: The HVAC Maintenance Technician performs a variety of skilled maintenance duties related to the facilities engineering and maintenance functions and is assigned to work for a Supervisor, Foreman, and/or Master Mechanic on a regular basis. Incumbent is guided by a comprehensive and proven skill in one trade as evident by possession of an appropriate license from the state. Within the incumbent's chosen trade, he/she will work independently to analyze and correct complex problems and ensure that non-license workers perform work in a manner consistent with correct work practices. Essential Duties and Responsibilities: Updates work statuses and documents tasks completed in the CMMS utilizing a mobile device. Helps determine manpower, material needs, and deadlines for jobs and projects. Cleans, lubricates, services, repairs, and diagnoses malfunction of HVAC, electrical and mechanical building systems, sterilizers, food service equipment, sprinkler and standpipe systems, transport systems, electronic signaling systems, fire alarm systems and similar plant and specialty equipment items Assists in making decisions on all repairs and reports major problems to the Maintenance Supervisor, Foreman, and Manger as appropriate. Constructs, finishes, installs, maintains, and repairs electrical and mechanical systems, or the facilities of any related systems, using power & hand tools and other necessary equipment. Reviews outside vendor projects and makes punch lists. Analyzes and corrects complex building system problems and electro/mechanical problems related to utilities. Supports project management activity as needed. Responds to emergency problems in the facility and makes emergency repairs as needed. Maintains logs, performs rounds, and completes P.M. work orders, tests, and inspections. Makes recommendations for modification or improvement of preventive maintenance systems. Maintains shops and mechanical areas in a clean and safe manner. Preforms other duties as assigned. Qualifications: 5 years' experience as a Maintenance Technician in an institutional setting in an engineering or maintenance discipline. One of the following: Journeyman Electrical License, Registered ACR Technician with EPA certification in Refrigerant, or Journeyman Plumber License. Experience working with blueprints and schematics. Valid driver's license. A general understanding of electro-mechanical equipment. Rudimentary ability to utilize hand-operated construction equipment. Ability to repeatedly lift 50 pounds and kneel/bend/stoop and perform strenuous labor for extended periods of time. Working Conditions: Some exposure to elevated degrees of high heat, noise, dust, dirt and/or areas requiring infection control. Requires meeting deadlines for completion of work on a daily basis. Must be able to work all hours, including weekends and nights, as necessary, in order to maintain facility at the appropriate and safe level. Enhance your quality of life through our comprehensive benefits: Medical/Dental/Vision Insurance 401K with Company Match Disability Insurance Life Insurance/AD Associate Shopping Program Health and Wellness Programs Discount Marketplace & Employee shopping program Identity Theft Protection Pet Insurance And More… Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Maryland, Washington State, or to be performed Remotely, click here for information on additional company-provided time off benefits. Applications are accepted on an ongoing basis. Quantum North America maintains a drug-free workplace. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity.

Job Details Hiller Pensacola - Pensacola, FLDescription The Hiller Companies, LLC has an immediate opening for Fire Suppression Technician. If you are a dedicated professional with a passion for fire protection and safety, we invite you to apply today. The Hiller Companies is a leading provider of fire protection and safety solutions, dedicated to safeguarding lives and property all around the world. Headquartered in Mobile, Alabama, Hiller extends its reach globally as well as in domestic markets with offices across the United States. With over 100 years in the industry, our mission is to ensure the highest standards of safety and innovation in comprehensive fire protection services, including installation, inspection, maintenance, and repair of critical fire and life safety equipment. Our team remains laser-focused on one goal - making the world a safer place. Job Summary: A Fire Safety Technician is responsible for the inspection, maintenance, and servicing of fire extinguishers and kitchen suppression hoods in accordance with industry standards and regulations. This role is critical in safeguarding lives and property by conducting thorough inspections, performing required maintenance, and providing expert service to our valued customers. Key Responsibilities: Conduct routine inspections of fire extinguishers and kitchen suppression hoods to ensure compliance with applicable codes and standards. Perform detailed maintenance tasks, including disassembly, cleaning, and reassembly of fire extinguishers and suppression hood systems to ensure optimal performance. Inspect and replace parts/components as needed, such as valves, hoses, nozzles, seals, fusible links, and detection lines, to maintain equipment functionality. Recharge fire extinguishers and suppression systems with appropriate extinguishing agents and pressurize them to recommended levels, following established procedures. Install and service fire extinguisher brackets, suppression hood nozzles, signage, and related safety equipment to ensure proper mounting and coverage. Provide on-site training to customers on the proper use and maintenance of fire extinguishers and suppression systems, promoting fire safety awareness and compliance. Respond promptly to service calls and emergency requests, troubleshooting issues and resolving them efficiently to minimize downtime. Maintain accurate records of service activities, including inspections, repairs, replacements, and customer interactions, using Service Trade platform. Assist with inventory management of fire extinguisher, suppression hood components, and stock, ensuring adequate supply levels and proper storage conditions. Work closely with Service Coordinator(s) to optimize work orders, routes, and job scheduling, focusing on efficiency, productivity, and customer satisfaction. Maintain a clean and organized work environment, always adhering to safety guidelines, protocols, and procedures. Stay updated on the latest fire safety technologies, regulations, and best practices for both fire extinguishers and kitchen suppression systems. Perform semi-annual and annual inspections of kitchen suppression systems, including functional testing and discharge simulations when required. Clean kitchen hoods, ducts, and fans to remove grease buildup and ensure proper system operation. Qualifications What We Are Looking For: High school diploma or equivalent; technical or vocational training in fire protection or related field preferred. Must have a pre-engineered permit for the state of FL. Must hold a valid portable permit for the state of FL. Certification as a Fire Extinguisher Technician (e.g., NFPA 10, NAFED) strongly preferred. Prior experience in fire extinguisher inspection, maintenance, and repair is highly desirable. Prior experience in hood system inspection, maintenance, and repair is highly desirable. Strong mechanical aptitude with the ability to use hand and power tools effectively. Excellent attention to detail and organizational skills. Effective communication skills, both verbal and written, with the ability to interact professionally with customers and team members. Valid driver's license with a clean driving record. Physical Requirements: Ability to lift and carry up to 50 pounds. Comfortable working in various environments, including industrial facilities, commercial buildings, and outdoor settings. Capable of standing, walking, bending, and kneeling for extended periods. Ability to work at heights and in confined spaces as needed. Hiller is a drug-free workplace, an equal opportunity employer and ADA compliant. We are proud to operate according to our Core Values: Passion to Perform, Trust to Act, Act Responsibly, and Make it Fun. Most employee benefits start from the first day of employment, including: Competitive compensation package, including pay advancement opportunities for industry certifications and continuing education. Comprehensive benefits package, including health, dental & vision insurance, retirement plans, company paid & voluntary life insurance, company paid short term disability, voluntary long term disability, critical illness & accident insurance and paid time off. Company-provided training, tools, and equipment, including $150 annual boot allowance for employees required to wear safety boots in their jobs. Career advancement potential within a growing company. Join us in our mission to provide comprehensive fire protection solutions and peace of mind to our customers, and together, let's make the world a safer place.

Job Description ???????? We're Hiring: Residential Service Technician - Join the Del-Air Dream Team! ???????? ???? Residential HVAC | ???? Company Vehicle | ???? Career Growth | ???? Sunshine Every Day ❄️ Love Fixing Things and Helping People? We've Got the Perfect Job for You! At Del-Air Plumbing, Air Conditioning, Electric, we're not just Florida's leading home service provider-we're a team of HVAC heroes who keep families cool, cozy, and safe all year long. And guess what? We're growing fast and looking for a Residential Service Technician who's ready to bring the skills and the energy to every job. ????️ What You'll Be Doing: Troubleshooting, repairing, and maintaining residential HVAC systems Installing ductwork, drain pans, thermostats, and other key components Diagnosing inoperative units and bringing them back to life Performing preventive maintenance-think coil sanitizing, drain cleaning, and more Using cool tools (gauges, voltmeters, leak detectors) to test and fine-tune equipment Keeping customers happy with clear communication and friendly service Staying sharp with tools, tech, and certifications (we'll even help you get your NATE!) ✅ What You Need to Bring: ✔️ 2+ years of hands-on HVAC experience ✔️ EPA Certification ✔️ Valid Florida Driver's License ✔️ Solid understanding of high & low voltage wiring ✔️ Strong communication and customer service skills ✔️ Willingness to work flexible hours (overtime as needed) ✔️ Ability to pass drug test & background check ✔️ Age 18+ and ready to roll! ???? Bonus if you're NATE certified-but we'll help the right tech get there! ???? What We Offer (a.k.a. Why You'll Love Working Here): ???? Real Career Growth & Advancement Opportunities ???? Competitive Wages ???? Medical, Dental, Vision + Supplemental Benefits ????️ ♂️ Company-Paid Life Insurance & Telehealth (MDLIVE) ???? PTO + Paid Holidays ???? 401K Retirement Plan with Match ????️️ ♀️ Wellness & Safety Programs ????️ ????️ ???? Team Culture & Referral Incentives ???? Work-Life Balance + Sunshine Every Day! ???? Ready to Power Up Your Career? Join the team that Florida trusts! We keep homes running and customers smiling-with top-quality work and top-notch teammates. Whether you're a seasoned tech or a rising star, Del-Air Plumbing, Air Conditioning, Electric is where your future begins. ???? Apply Now and Let's Keep Florida Cool-Together! ???? Del-Air Plumbing, Air Conditioning, Electric - FOLLOW THE LEADER.

Job Description Primary Responsibilities: Inspect, identify, & correct any electrical deficiencies or unfinished work in a construction or installation project. Specific Duties & Tasks: Review project punch lists and ensure all electrical tasks are completed accurately and on time. Inspect installed electrical systems for compliance with blueprints, job specifications, NEC code, and safety standards. Identify and repair deficiencies such as missing covers, incomplete terminations, faulty connections, or improperly installed fixtures/devices. Perform minor adjustments or corrections to ensure full functionality of outlets, switches, lighting, breakers, and other components. Collaborate with electricians, contractors, and site supervisors to resolve issues efficiently. Maintain a clean and safe work area and ensure all work is performed to company standards. Document completed tasks and communicate job status to supervisors or project leads. Prepare job sites for final inspections and assist in walk-throughs if needed. Operate hand tools, testing devices, and company equipment safely and responsibly. Qualifications: Successfully complete a background check and drug screen. Strong ability to read blueprints and electrical schematics accurately. 2+ years of experience in electrical installation or construction punch-out work (preferred). Familiarity with using power tools safely and effectively in various applications. Excellent problem-solving skills and attention to detail in all aspects of work. Ability to manage time effectively and prioritize tasks within a fast-paced environment. Be at least 18 years of age. Eligible to legally work in the United States. Always obtain a valid driver's license for at least 15 months, and able to meet FCCI auto guidelines to operate a company-owned vehicle.

Job Description Since 1986, Advanced Refrigeration & Air has been a leader in commercial refrigeration and air conditioning. Based in Orlando, Florida, our family-owned company operates across five locations in the state. For almost 40 years, we have provided top-tier service to grocery retailers, restaurants, and businesses throughout Florida, Georgia, and Alabama. To ensure customer satisfaction we are continuously striving to hire skilled Service Technicians for Supermarket Refrigeration in the Orlando Area. We need skilled Service Technicians with expertise in Commercial HVAC, Supermarket, and Rack Refrigeration. If you excel in installing, maintaining, and repairing commercial refrigeration and HVAC systems, we want you to join our Orlando team! Responsibilities: Accurately document maintenance and repair activities. Communicate effectively with clients to provide excellent service and address their needs. Conduct thorough inspections to identify potential problems early and enhance equipment efficiency. Diagnose and repair commercial refrigeration systems, including walk-in coolers, freezers, ice machines, display cases, and HVAC units. Follow safety protocols to maintain a safe working environment. Perform routine maintenance tasks such as coil cleaning, filter replacement, and refrigerant level checks. Use advanced diagnostic tools to troubleshoot electrical and mechanical issues with precision. Qualifications: Ability to work on-call and rotating shifts. Capable of working independently as well as part of a team. Clean driving record and valid driver's license. EPA Universal Certification for refrigerant handling. Knowledgeable in electrical and mechanical systems. Physically able to lift heavy equipment and work in varied environments. Proficient in using specialized diagnostic and repair tools. Strong experience with commercial refrigeration systems and troubleshooting. What We Offer: Medical, Dental, Vision & Voluntary Coverages Retirement Plans - 401(k) with Company Match Paid Holidays & Vacation Career Growth Opportunities Company Vehicle & Cell Phone Equipment & Tools On-the-Job Training For more information, please visit our company website at: **************

Job Description Service Technician Travel Required: Nationwide Are you someone who loves the satisfaction of solving problems on-site, keeping systems running smoothly, and building lasting relationships with customers? North American Refrigeration is looking for a dedicated Service Technician to join our team! If you're ready to hit the road and ensure our customers' facilities are operating efficiently, this is the role for you. About North American Refrigeration North American Refrigeration is a Florida based industrial refrigeration contractor that serves the refrigeration needs of operators throughout the Southeast. Over the last 20 years, North American has built a reputation for delivering quality construction, effective preventative maintenance programs, and dependable 24/7 emergency service. What You'll Do: Provide Service & Support: Travel to customer facilities across the U.S. to install, repair, maintain, and test facility equipment. Problem Solving: Diagnose issues, determine the right solutions, and communicate resolutions to the customer or Service Manager. System Start-Ups: Complete pump-outs and start up equipment after construction projects, ensuring everything runs seamlessly. Customer Interaction: Build strong relationships with customers while keeping them informed about service progress and solutions. Adhere to Safety Standards: Follow all safety procedures and ensure incident reporting is timely and accurate. Expense Management: Submit accurate and timely expense reports in line with North American Refrigeration's guidelines. Clean Driving Record: Maintain a clean driving record and be prepared to travel extensively across the continental U.S. Other Duties: Take on additional responsibilities as needed to keep projects moving forward and customers happy. What Describes You: Highly Skilled Technician: You have experience with equipment installation, repair, and maintenance, and you understand how critical these services are to keeping facilities operational. Hands-On Problem Solver: You excel at diagnosing issues and implementing practical solutions that get the job done. Customer-Focused: You love working directly with customers, ensuring their equipment operates smoothly, and building positive relationships. Flexible & Ready to Travel: Although our goal is to keep you as local as possible, you would be required to travel as required, with overnight stays as needed. Safety-Minded: You never compromise on safety and follow all reporting procedures to the letter. Qualifications: High school diploma or associate degree, or a combination of relevant experience and education. Preferred: CIRO/CARO certifications, experience with industrial refrigeration systems, and knowledge of electrical components. Ability to work well independently with limited supervision. Effective communication skills. Why You Should Apply: If you're looking for a role that allows you to travel, troubleshoot equipment, and make a tangible impact at each job site, this is the perfect opportunity for you! North American Refrigeration is committed to offering growth and advancement for passionate and driven team members. Excited to get started? Hit that apply button and let's begin your journey with North American Refrigeration! Job Posted by ApplicantPro

Service Technician Travel Required: Nationwide Are you someone who loves the satisfaction of solving problems on-site, keeping systems running smoothly, and building lasting relationships with customers? North American Refrigeration is looking for a dedicated Service Technician to join our team! If you're ready to hit the road and ensure our customers' facilities are operating efficiently, this is the role for you. About North American Refrigeration North American Refrigeration is a Florida based industrial refrigeration contractor that serves the refrigeration needs of operators throughout the Southeast. Over the last 20 years, North American has built a reputation for delivering quality construction, effective preventative maintenance programs, and dependable 24/7 emergency service. What You'll Do: Provide Service & Support: Travel to customer facilities across the U.S. to install, repair, maintain, and test facility equipment. Problem Solving: Diagnose issues, determine the right solutions, and communicate resolutions to the customer or Service Manager. System Start-Ups: Complete pump-outs and start up equipment after construction projects, ensuring everything runs seamlessly. Customer Interaction: Build strong relationships with customers while keeping them informed about service progress and solutions. Adhere to Safety Standards: Follow all safety procedures and ensure incident reporting is timely and accurate. Expense Management: Submit accurate and timely expense reports in line with North American Refrigeration's guidelines. Clean Driving Record: Maintain a clean driving record and be prepared to travel extensively across the continental U.S. Other Duties: Take on additional responsibilities as needed to keep projects moving forward and customers happy. What Describes You: Highly Skilled Technician: You have experience with equipment installation, repair, and maintenance, and you understand how critical these services are to keeping facilities operational. Hands-On Problem Solver: You excel at diagnosing issues and implementing practical solutions that get the job done. Customer-Focused: You love working directly with customers, ensuring their equipment operates smoothly, and building positive relationships. Flexible & Ready to Travel: Although our goal is to keep you as local as possible, you would be required to travel as required, with overnight stays as needed. Safety-Minded: You never compromise on safety and follow all reporting procedures to the letter. Qualifications: High school diploma or associate degree, or a combination of relevant experience and education. Preferred: CIRO/CARO certifications, experience with industrial refrigeration systems, and knowledge of electrical components. Ability to work well independently with limited supervision. Effective communication skills. Why You Should Apply: If you're looking for a role that allows you to travel, troubleshoot equipment, and make a tangible impact at each job site, this is the perfect opportunity for you! North American Refrigeration is committed to offering growth and advancement for passionate and driven team members. Excited to get started? Hit that apply button and let's begin your journey with North American Refrigeration!

Job Description UNLEASH YOUR POTENTIAL and MAKE AN IMPACT! A place where empowering minds fuel innovation. Our Mission is to provide products and services, in an honorable way, that exceed the expectations of each one of our clients. Success Depends on Employees Like You, who pride themselves in teamwork, professionalism, knowledge, ability, loyalty, and exceeding customer expectations. We Want Our Employees to Thrive and Grow, a place where a job is more than a job, It Is a Career! Learn while on the job, always preparing to achieve the next step of personal and professional success. We continually invest in you! Join Our Growing Team! We are now seeking Commercial HVACR Service Technicians. If you are/have: Exposure to high end HVACR technology (City Multi VRF, Aaon, Refrigeration, split systems) EPA Certified Experienced in offering high customer service skills and helpful attitude. Detailed oriented, skilled with smart phone paperless system and take pride in accuracy as a signature of your work. Skilled in delivering your work timely with a positive and encouraging presence to customers and co-workers Have a clean driving record and 3+ years driving experience No high-pressure sales or quotas WANT COMPETITIVE PAY AND GREAT BENEFITS? Look no more, we offer 8 Paid Holidays, Company Paid Basic Life and Long-Term Disability, PTO, Medical, Dental, Vision, supplemental insurance benefits of Accident, Critical Illness, 401(K) Retirement plan, and above all, a great atmosphere with on-going training and teamwork. For additional information or assistance please visit *********************** Conditioned Air provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. In compliance with the Drug-Free Workplace Act of 1988, Conditioned Air has a longstanding commitment to provide a safe, quality-oriented, and productive work environment. Alcohol and drug abuse pose a threat to the health and safety of Conditioned Air employees and to the security of the companys equipment and facilities. For these reasons, Conditioned Air is committed to the elimination of drug and alcohol use and abuse in the workplace.

Style Crest has a 50-year tradition of growth and innovation in the building products industry. The organization has a commitment to the manufactured housing industry and the residential exterior cladding market with an extensive product offering and a dedicated service platform that customers count on to support the success of their businesses. Style Crest, Inc. is looking for an experienced heating and cooling technician to join our HVAC installation and service team in Lake City , FL. As the HVAC Service Technician, you will troubleshoot, repair, service and install a variety of HVAC equipment including refrigeration, air conditioning, electric motors, heating units, heat pumps, compressors, boilers, burners, intake and exhaust fans, etc. Ensures service work and new installations are performed professionally, timely and accurately to build confidence and a positive reputation in the eyes of the customer. Manages time proactively to ensure scheduled jobs are completed each day. Trains and assists other service technicians and installers in troubleshoot or solving issues on the job. Works with scheduling to understand the priority of the jobs each day. Ensures the needed parts and tools are loaded on the truck for each day's activities. Notifies management of any issues with vehicles, equipment or tools. Keeps assigned company vehicle clean and organized. Performs all work in a professional manner and treats customers with respect at all times. Qualified candidates must possess the following knowledge, skills, experience and abilities: * 1 to 2 years of HVAC experience with a thorough understanding of installation, start up, troubleshooting, repair, tools and test instruments. * Must be mechanically inclined and be capable of troubleshooting and repairing equipment. * Demonstrates strong organizational, customer service and time management skills. * Must be a dependable person who is willing to learn new tasks and is a team player. * Effective written and verbal communication skills with customers and co-workers. * Must be willing to work on-call and overtime hours as needed. * Must have a valid driver's license and an acceptable MVR. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Style Crest has a 50-year tradition of growth and innovation in the building products industry. The organization has a commitment to the manufactured housing industry and the residential exterior cladding market with an extensive product offering and a dedicated service platform that customers count on to support the success of their businesses. Style Crest, Inc. is looking for an experienced heating and cooling technician to join our HVAC installation and service team in Lake City , FL. As the HVAC Service Technician, you will troubleshoot, repair, service and install a variety of HVAC equipment including refrigeration, air conditioning, electric motors, heating units, heat pumps, compressors, boilers, burners, intake and exhaust fans, etc. Ensures service work and new installations are performed professionally, timely and accurately to build confidence and a positive reputation in the eyes of the customer. Manages time proactively to ensure scheduled jobs are completed each day. Trains and assists other service technicians and installers in troubleshoot or solving issues on the job. Works with scheduling to understand the priority of the jobs each day. Ensures the needed parts and tools are loaded on the truck for each day's activities. Notifies management of any issues with vehicles, equipment or tools. Keeps assigned company vehicle clean and organized. Performs all work in a professional manner and treats customers with respect at all times. Qualified candidates must possess the following knowledge, skills, experience and abilities: * 1 to 2 years of HVAC experience with a thorough understanding of installation, start up, troubleshooting, repair, tools and test instruments. * Must be mechanically inclined and be capable of troubleshooting and repairing equipment. * Demonstrates strong organizational, customer service and time management skills. * Must be a dependable person who is willing to learn new tasks and is a team player. * Effective written and verbal communication skills with customers and co-workers. * Must be willing to work on-call and overtime hours as needed. * Must have a valid driver's license and an acceptable MVR. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

The Mechanical Service Technician provides support to Power Design projects by performing Mechanical work within a specified region. This individual installs and repairs HVAC mechanical systems, start-ups, fixtures, wiring, controls, and equipment as needed. Position Responsibilities Perform preventative and corrective maintenance when required, diagnosing and resolving any issues as they arise. Advanced knowledge on VRF, DX Split, Chillers, Boilers, and other advanced mechanical systems. Perform HVAC system start-up and commissioning Execute initial system start-up procedures and comprehensive commissioning tasks to ensure all HVAC components operate according to design specifications and industry standards, including system calibration, performance verification, and documentation of operational parameters. Ensure that all work adheres to contract scope and specifications; job site safety and security; and Power Design's values, policies and procedures. Provide superior customer service, developing customer relationships on a regular basis. Provide weekly status updates on warranty calls, small projects and service work, service tickets, labor requirements and material requirements. Work as an HVAC Technician on a designated job site when not answering service calls or performing maintenance. Perform other duties as assigned. Here's What We're Looking For Skilled HVAC Technician with at least five years of service experience required; ten years of related experience preferred. Proficient knowledge of the IECC, ICC, and ASHRAE Standards; local codes; and construction safety requirements EPA Certified OSHA 30 certification preferred. Active Journeyman or Master's HVAC license preferred Experience with office software required. Proficiency in Microsoft Office software, including Excel, Word and Outlook preferred. Self-motivated individual with the ability to work independently. Must be willing to travel as required. Demonstrate and uphold all the core values of Power Design, which include integrity, accountability, teamwork, innovation and growth. At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide