Field technician jobs in West Mifflin, PA - 357 jobs

Summary The Field Service Technician performs a variety of tasks, including but not limited to, onsite bolting, heat treating and/or field machining. Completes any and all tasks assigned by the Field Supervisor to meet goals of increased efficiency, profitability, and customer satisfaction. Ideal candidates will have experience with construction or mechanical work and/or possess knowledge of plant maintenance and repair work. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications Experience in mechanical bolting, heat treating, or field machining preferred. Experience performing maintenance and turnaround services to refining, chemical, midstream, and power. High School Graduate or General Education Degree (GED) preferred. Possess a current TWIC card or have the ability to obtain one. Valid driver license with a clear driving record Demonstrated mechanical ability. Must be able travel a minimum of 75% of the time. Knowledge, Skills and Abilities Ability to pass a non-DOT medical exam, drug and alcohol test, respirator qualification test, and federal class background check. Ability to work at heights or in enclosed spaces. Accuracy - Ability to perform work accurately and thoroughly. Detail Oriented - Ability to pay attention to the details of a project or task. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Working under pressure - ability to complete assigned tasks under stressful situations and adapt to changing assignments on short notice. Accountability - Ability to accept responsibility and account for his/her actions. Essential Functions Perform onsite bolting, heat treating or field machining work at customer locations. Troubleshoot onsite equipment and determine the proper methods fulfill customer's needs and specific applications. Operate a variety of tools for field work. Properly document and/or record work performed utilizing required internal and customer job-related forms/paperwork. Keep a clean and safe working environment and optimize space utilization. Communicate and cooperate with supervisors and coworkers. Meet and communicate with customers in a professional manner. Operate and preventively maintain company tools, equipment, and vehicles. Follow quality service standards and comply with procedures, rules, and regulations. Work in accordance with all safety regulations Other duties as assigned Physical Demands Must be able to stand and walk for much of the day. Ability to lift 5-25 pounds frequently and ability to lift up to 50 pounds occasionally. BE SURE TO APPLY ON OUR WEBSITE: ****************

Department: Service Reports To: Service Manager Purpose: Independently performs complex diagnostics, service repairs and maintenance work on customer and/or dealer-owned agricultural and turf equipment. May require some direction or guidance from the Service Manager, Service Location Manager, or Shop Foreman. Key Responsibilities: Performs diagnostics and repairs on John Deere equipment and technology Mentors Service Technician Trainees and Service Technicians Conducts or supports customer clinics Perform diagnostics and repairs in the field as required Accountable for billable time and assigned work orders Responsible for complete and thorough documentation of diagnostics and repairs performed on work orders and on time submittal of information May participate in John Deere University Training programs required for the development of skills and knowledge Operates and maintains vehicles, tools and equipment required to perform job responsibilities Maintains a clean work area and performs work in a neat and orderly fashion Follows all safety rules and regulations in performing work assignments Maintains current knowledge of John Deere and competitive products All other duties as assigned Experience, Education, Skills and Knowledge: Experience performing service repairs; demonstrated experience consistently meeting performance metrics preferred Experience performing repairs and maintenance using special tools and equipment following Technical Manual procedures on machines of the Technician's specialty Experience with the mechanical, electrical and hydraulic systems used in off road, construction, lawn, or heavy equipment Experience operating vehicles, tools, and equipment for diagnostic purposes Experience with basic computer functions; experience using Service ADVISOR™ or other computer based diagnostic repair tools preferred Experience working cooperatively in a team environment Experience communicating effectively verbally and in writing Must have an adequate toolset to perform job responsibilities High School Diploma, GED, or equivalent experience required; Associate degree preferred Valid driver's license required; CDL (Commercial Driver's License) preferred

BHE GT&S has an exciting opportunity as a Telecommunications Technician 1, Telecommunications Technician 2 or Telecommunications Technician 3 at our Western Area Headquarters in Greensburg, PA or at our Luthersburg, PA location. RESPONSIBILITIES Guides and directs a team of technicians involved in activities related to network monitoring, operations, installation, and/or maintenance for local off-site and/or remote locations. Instructs, directs, and checks the work of telecommunications technician personnel. Works with an individual business unit on multi-project assignments. Monitors project's progress and results. Errors may cause significant delay, expense, and disruption. QUALIFICATIONS Telecom Technician 1: 0-2 years' related experience. Experience in network and telecommunications applications required. Basic knowledge of all areas of telecommunications. Ability to work on telecommunications systems and equipment. Ability to analyze trouble reports and perform maintenance of telecommunications equipment. Strong aptitude for technical understanding. Skills to communicate with various departments, internal groups, and external customer groups to perform work. Has awareness of customer requirements, with emphasis on major initiatives. Ability to set priorities and demonstrate timely and effective response to customer and team member needs. Understanding of business unit methods and processes within the realm of responsibility. Ability to respond effectively to diverse demands. Ability to respond effectively and timely to the needs and requirements of the business units. Must provide personal availability and maintain rotation on call status. Must be able to lift 45 pounds. Must be able to see color and distinguish between colors. Telecom Technician 2: At least 3 years' experience in network and telecommunications applications is required. Knowledgeable in all areas of telecommunications. Ability to work on complex telecommunications systems and equipment. Ability to analyze trouble reports and perform maintenance, or provide recommendations for problem correction of telecommunications equipment. Ability to maintain and update telecommunications equipment, circuit prints, drawings, and records. Ability to answer peer questions. Ability to assist and direct co-workers and other technical groups. Ability to coordinate and plan telecommunication work with various departments, internal groups, and external customer groups. Awareness of customer requirements with emphasis on major initiatives. Ability to set priorities and demonstrate timely and effective response to customer and team member needs. Broad understanding of methods and processes of business units within the realm of responsibility. Ability to respond effectively to diverse demands. Ability to respond effectively and timely to the needs and requirements of the business units. Must provide personal availability and maintain rotation on call status. Must be able to lift 45 pounds. Must be able to see color and distinguish between colors. Telecom Technician 3: At least 5 years' experience in network and telecommunications applications is required. Considered a technical expert, knowledgeable in all areas of telecommunications. Ability to work on complex, telecommunications systems and equipment. Ability to analyze trouble reports and perform maintenance, or provide recommendations for problem correction. Ability to act as a lead worker and provide direction and training to subordinates and other technical groups. Must possess skills to interact with various departments, internal groups, and external groups to plan, schedule, and coordinate necessary telecommunications work. Awareness of customer requirements, with emphasis on major initiatives. Ability to set priorities, and to demonstrate timely and effective response to customer and team member needs. Broad understanding of methods and processes of the business units within the realm of responsibility. Ability to respond effectively to diverse demands . Ability to respond effectively and timely to the needs and requirements of the business units. Must provide personal availability and maintain rotation on call status. Must be able to lift 45 pounds. Must be able to see color, and distinguish between colors. May be involved in national or international committees, and required to write technical reports, papers, or procedures, with little or no supervision. Education (All Levels) High School Diploma ABOUT THE TEAM BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation. JOB INFO Job Identification 10004178 Job Category Telecom and Networking Posting Date 2026-01-20 Apply Before 2026-02-17T04:59:00+00:00 Job Schedule Full time Locations 518 Energy Way, Greensburg, PA, 15601, US Travel Requirements Up to 50% Relocation Assistance Not currently offered for this position Business Eastern Gas Transmission and Storage, Inc. Compensation details: 32.26-53.37 PI43b5df7a6d17-26***********7

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

This is a doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

Calgon Carbon | A Kuraray Company currently has an opportunity where you can be a part of our growing team as we provide our customers with outstanding products that make the air we breathe and the water we use safe for generations to come. Position: Field Service Representative I Location: US - Remote Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, dress for your day, hybrid schedules, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Mondays - Fridays, 9:00 AM - 5:00 PM, 40 Hrs/Wk The Field Service Representative I position will be the direct implementation of customer required on-site field services related to CCC activated carbon product, equipment, and service offerings. The Field Service Representative I will be apart of CCC's customer support and service value proposition by contractual obligation. Duties and Responsibilities (not limited to) Scheduling and documentation of daily on-site activities using FSWO database and work process Carbon adsorption equipment start-up and customer training on proper use through O&M manual and work process Carbon and other media removal and installation Carbon adsorption equipment installation and removal Carbon adsorption equipment maintenance, inspection repair and troubleshooting Qualifications High school diploma or general education degree (GED) is required Confined Space Certification (Candidate must successfully complete training within 3 month of hire data) is required Driver's License (Class A preferrable) is required HAZWOPER 40-Hour Certification (Candidate must successfully complete training within 3 month of hire data) is required Transportation Worker Identification Credential (Candidate must successfully obtain within 3 month of hire data) is required 2-3 years' mechanical aptitude and an understanding of mechanical systems; hands-on experience in troubleshooting and resolving/repairing technical and mechanical issues is required Experience in the carbon treatment industry or a related field is preferred About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Generous quarterly profit-sharing bonuses and plenty of overtime available, In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Ability to pass a comprehensive background check and drug screening Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $20-$22 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris Great Lakes a division of the Morris Group, Inc, supplies CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in western New York, western Pennsylvania and West Virginia. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. Summary of Responsibility: The Field Service Technician will have an understanding of electrical, pneumatic, and hydraulic schematics to effectively detect and resolve issues with electrical and mechanical components. Duties include, but are not limited to: Daily travel from home to customer facilities with overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. Install, commission, calibrate, maintain, address, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. Demonstrate a willingness to help others and be a productive team member. Ensure accurate documentation is completed and connect with office management daily. Efficiently update the status of machine issues, repairs, and installations using the Salesforce Lightning Customer Support computer system. Maintain an in-depth knowledge of machine tool industry and product lines represented by the company. Promote and perform preventative maintenance and successfully diagnose and resolve CNC equipment issues to the customer's satisfaction. Qualifications & Competencies Minimum of one year of experience with a machine tool builder or distributor, a factory maintenance technician would also be considered. Proficient verbal and written communication and Customer relation skills. Able to interact and optimally communicate in person and over the phone with customer and co-workers. Present a professional image. Must be adaptable to changes and flexible when dealing with delays, or general work-related issues Basic digital literacy and understanding of MS Word, Excel, and Outlook. Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background, is a plus. Basic mechanical and logical solving skills and ability to read and interpret drawings and schematics are required. Rational decision making and problem-solving skills. Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. Other Functions: Perform related duties as required The duties listed above are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What's in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Paid Time Off, starting with 23 paid days off in your first year. 10 Company Paid Holidays Comprehensive Health Benefits including, Medical, Vision, Dental and Life Insurance 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be highly mobile, able to access all areas of the premises. Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. Ability to sit for prolonged period of times. Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. Ability to frequently use hands and arms. Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Ability to keep their composure with the public and co-workers in everyday, stressful situations. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1486B- Pittsburgh, PA

Opportunity As a trusted federal contractor, IMG delivers mission-focused solutions that support government customers and the people who serve them. We are currently hiring a Network Cable Technician who will support our team at Bettis Atomic Power Laboratory with installing, maintaining, and troubleshooting network cabling infrastructure, including both copper and fiber optic systems. They may also support cable pulling, terminations, testing, and documenting cable runs for the Naval Nuclear Laboratory mission. Key Responsibilities Install equipment enclosures, patch panels, and equipment (network - LAN/SAN, server, storage, UPS, etc.) as directed Install grounding cables for equipment enclosures, equipment, and cable tray Install cable tray/raised floor cable tray and cable tray accessories Install intra-building backbone cabling Install cable trays, J Hooks, and cable tray accessories Install horizontal cable Install work area outlets, faceplates, jacks, and patch cables Remove kick-plates and pedestals on cubicles to install network cabling Terminate Category 3, 5e, 6, and 6a UTP cable on patch panels and modular plugs Terminate 62.5-micron multimode fiber, 50-micron multimode fiber, and single mode fiber using ST, SC, and LC connectors using the anaerobic adhesive system and Corning UniCam system Diagnose and correct copper cable and fiber optic cable problems Replace failed equipment and install new equipment as directed Complete network trouble tickets as directed, document test results as needed Key Responsibilities Installation Install equipment enclosures, patch panels, and equipment (e.g., LAN/SAN, servers, storage, UPS) as directed Install grounding cables for equipment enclosures, equipment, and cable trays Install cable trays, J-hooks, raised floor cable trays, and related accessories Install intra-building backbone cabling Install horizontal cabling Install work area outlets, faceplates, jacks, and patch cables Remove kick-plates and pedestals on cubicles to install network cabling Organize, form, and dress cables Termination Terminate Category 3, 5e, 6, and 6a UTP cables on patch panels and modular plugs Terminate 62.5-micron multimode, 50-micron multimode, and single-mode fiber using ST, SC, and LC connectors (anaerobic adhesive system or Corning UniCam system) Troubleshooting & Maintenance Diagnose and correct copper and fiber optic cable issues Replace failed equipment and install new equipment as directed Complete work orders and network trouble tickets Groom network enclosures and equipment as directed Inventory material as directed Documentation & Testing Perform certification testing of UTP cables (Category 3, 5e, 6, and 6a), fiber (multimode and single-mode), and coaxial cables Document test results as required Label and document network equipment, cable paths, rooms, and cabinets Maintain configuration/control records for copper and fiber patch panels and cable locations Qualifications 5+ years' experience in cabling or network technician work Qualified to install, terminate, and conduct certification testing of Category 3, 5e, 6, and 6a unshielded twisted pair (UTP) cable, multimode and single-mode fiber cable Knowledge in the application of the following structured cable standards and codes: ANSI/TIA/EIA 568-B ANSI/TIA/EIA 569 ANSI/TIA/EIA 606 ANSI/TIA/EIA 607 NFPA 70 Proficient with Fluke DSX-8000 copper/fiber tester Proficient with Fluke OFP-100-QI OptiFiber Pro Optical Time Domain Reflectometer Writing and speaking clearly and concisely about technical topics Active Secret or L security clearance Preferred Qualifications Active Top Secret or Q security clearance About IMG Founded in 1987, IMG is a leading small business that exemplifies competence, integrity and follow-through. We consistently provide customer focused professional services, which ensures our company is recognized for continually exceeding expectations. We believe that at the core of our success stand our people. Our people have provided professional services in the Information Technology field for our customers with a commitment to customer satisfaction for over 35 years. IMG Benefits: Health, dental, vision, and life insurance Short term and long term disability insurance 401(k) with generous company match Health Savings Accounts (HSA) Personal leave plus paid federal holidays Professional development and training assistance IMG is an equal opportunity employer including disability and protected veterans or other characteristics protected by law.

ABOUT YOU Are you passionate about air quality and ready to join an inclusive work environment, committed to leading new ideas and pathways, and to delivering value? If the answer is, “Yes!” then we have an exciting Full-time career opportunity for you in Pittsburgh, PA. Who are we? We are Montrose, a global environmental services provider offering environmental planning and permitting, measurement and analytical services, and environmental resiliency and sustainability solutions. Our qualified engineers, scientists, technicians, associates, and policy experts are proud of our collective expertise and the collaborative nature of our approach to helping clients. We strive to optimize environmental resiliency in a way that effectively complements our clients' decision-making and operations and efficiently fulfills their project requirements. We have over 90 offices across the United States, Canada, Europe and Australia and approximately 3,500 employees - all ready to provide solutions for environmental needs. The Fugitive Emission (FE) team is responsible for performing inspections on various types of facilities in the Oil and Gas Industry to identify and quantify hydrocarbon gas leaks and vents. A normal technician schedule averages 180 total days of work per year. Job Type: Full-time Compensation: $50,000 - $60,000 annually (Eligible for Overtime pay) WHAT WE CAN OFFER YOU As a key member of our Montrose team, you can expect: Direct exposure to our industry's leading experts who are solving the world's toughest environmental challenges An entrepreneurial environment where you can learn, thrive and collaborate with talented colleagues Opportunities to engage and contribute in our Diversity, Fairness and Inclusion and Women Empowering Leadership employee resource groups Competitive compensation package: annual salary ranging from $50,000 to $60,000 annually, commensurate with accomplishments, performance, credentials and geography Competitive medical, dental, and vision insurance coverage 401k with a competitive 4% employer match Progressive vacation policies, company holidays and paid parental leave benefits to ensure work/life balance A financial assistance program that supports peers in need, known as the Montrose Foundation Access to a student loan planning tool to optimize your student loan payoff plans and compare student loan rates with lenders. A DAY IN THE LIFE IDEAL CANDIDATES will have an intimate understanding of oil and gas field operations (experience working in an O&G facility would be a definite asset) and have experience in performing hydrocarbon fugitive emission and /or leak detection projects. The FE Technician will report to the FE Team Lead. The successful candidate will be required to take a number of safety training courses prior to initiating any field activities (CPR/1St Aid, H2S Alive, WHIMIS/TDG, Fall Protection etc.). Any candidates that already have valid training tickets will be given preference. This position includes a comprehensive safety and technical training program (both field and office based). This position offers a unique opportunity to join a successful Environmental Engineering firm and work with a industry leading technologies used to detect and measure methane gas emissions. As a key member of the Fugitive Emission (FE) team, this role will be responsible for a full range of activities including: Assisting in coordinating and navigating to various facilities with maps and GPS Helping to calibrate and maintain equipment Using various detection and measurement technologies under the supervision of the Team Lead Collecting and recording emission data Preparing field reports as required NECESSARY QUALIFICATIONS To perform this job successfully, individuals must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Understanding of EPA Subpart VV, VVa, KKK, OOOO, OOOOa, and W Fugitive Emission Monitoring requirements Knowledge/Experience on US EPA and ASTM stack testing methodologies is an asset Experience in Oil and Gas industry (preference given to candidates with natural gas processing/transmission facility experience) Effective computer skills (Excel and Microsoft Office are essential) and proficiency with Android OS Ability to work 12 hour shifts (days only) Ability to walk and/or stand while handling/carrying various technical equipment for extended periods of time Comfortable occasionally working at heights in a safe manner Ability to travel Valid driver's license Preference will be given to candidates with an Associates or Bachelors Degree in engineering technology or applicable technical degree/diploma; related work experience in hydrocarbon detection and measurement, LDAR, instrumentation or stack emission testing or a mechanical background are also preferred, but not required All candidates will be subject to background and drug screening. The above statements are intended to describe the general nature of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of employees so classified. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact ************ or ************************ for assistance. MAKE THE MOVE TO ACCELERATE YOUR CAREER We are going to be blunt - the way we work may not suit everyone. We are a fast-paced, dynamic and high-growth company. You are your own boss, but you will get tons of guidance and plenty of support from talented, super-smart colleagues and its service providers. Therefore, if freedom, autonomy, and head-scratching professional challenges attract you, we could be the perfect match made in heaven. Want to know more about us? Visit montrose-env.com and have fun! Montrose is an Equal Opportunity Employer. Montrose is committed to recruiting and hiring qualified candidates without regard to race, religion, sex, sexual orientation, gender identity, age, national origin, ancestry, citizenship, disability, or veteran status. Montrose is committed to providing access and reasonable accommodation in its employment for individuals with disabilities. #INDMEG #LI-JJ1

JARBO Summary: JARBO Employment Group is specialized in recruiting for companies specialized in performing CCTV camera inspections of underground utility systems, and is proud to represent a number of leading firms nationwide. JARBO's Recruiters are passionate about helping you to pursue and obtain rewarding career opportunities much like this one. Summary - Environmental Field Technician: If you are looking for a hands-on, outdoor role in a stable industry sector with an industry-leading firm, while having a strong work-life balance, this opportunity may be a great fit for you. As an Environmental Field Technician, you will be gaining valuable field experience while collecting specialized data from municipal water/wastewater systems which is used to help improve these systems. This is an entry-level opportunity and is great for graduates of environmental science, geology, geography and civil engineering programs whom are interested in gaining valuable field experience in a growing market sector. Responsibility Summary - Environmental Field Technician: Installation of flow monitoring systems within sewer lines. Installation of rainfall monitoring equipment. Input data into software systems which may include geographic information system software (GIS). Inspect sewer manholes manually or with telemonitoring equipment. Operate and maintain instruments and equipment. Accurately document inspections in a timely manner with detailed field notes. Adhere to all the safety requirements of the position while assisting team members to do the same. All other duties as assigned. Qualification Summary -Environmental Field Technician: High school diploma (AS or BS degrees in Civil Engineering, Environmental Science, Geology or a related degree program preferred) Valid driver's license and clean driving record with the ability to operate a company vehicle Ability to detect, resolve and report equipment issues (strong electrical and mechanical aptitude preferred) Strong computer literacy with the ability to effectively utilize commonly used computer software programs (experience with GIS strongly preferred) Ability to perform all of the physical requirements of position Preferred experience/knowledge with field data collection Willingness and ability to travel as needed Physical Demands: Standing and walking for long hours Use hands and fingers to control, handle and feel objects See details of objects from a distance Lift, push, and pull up to 75 pounds when necessary Work outside year-round in all conditions present Climb stairs and walk on uneven terrain Squat and crawl #IND1

Job Description Summary - Environmental Field Technician: If you are looking for a hands-on, outdoor role in a stable industry sector with an industry-leading firm, while having a strong work-life balance, this opportunity may be a great fit for you. As an Environmental Field Technician, you will be gaining valuable field experience while collecting specialized data from municipal water/wastewater systems which is used to help improve these systems. This is an entry-level opportunity and is great for graduates of environmental science, geology, geography and civil engineering programs whom are interested in gaining valuable field experience in a growing market sector. What's in it for you as an Environmental Field Technician: Competitive compensation starting at $22-23/hour Medical Insurance Dental Insurance Vision Insurance 401K with company match Holiday pay Responsibility Summary - Environmental Field Technician: Installation of flow monitoring systems within sewer lines. Installation of rainfall monitoring equipment. Input data into software systems which may include geographic information system software (GIS). Inspect sewer manholes manually or with telemonitoring equipment. Operate and maintain instruments and equipment. Accurately document inspections in a timely manner with detailed field notes. Adhere to all the safety requirements of the position while assisting team members to do the same. All other duties as assigned. Qualification Summary - Environmental Field Technician: High school diploma Valid driver's license and clean driving record with the ability to operate a company vehicle Ability to detect, resolve and report equipment issues (strong electrical and mechanical aptitude preferred) Strong computer literacy with the ability to effectively utilize commonly used computer software programs (experience with GIS strongly preferred) Ability to perform all of the physical requirements of position Preferred experience/knowledge with field data collection #IND1

Prescott's is a leading medical device services company, trusted by healthcare professionals across the country. We specialize in the distribution and expert refurbishment of essential medical equipment, including sterilizers, surgical microscopes, pumps, monitors, anesthesia machines, and more. Our mission is to enhance the quality of healthcare by ensuring providers have access to reliable, high-performing equipment. If you're passionate about supporting the frontlines of care through innovation and service, we'd love to have you on our team. This position will support Preventative Maintenance Medical - a subsidiary of Prescott's, Inc. As a Field Service Technician, you will be responsible for servicing, repairing and installing medical sterilizers. This is a hands-on, field-based position that requires mechanical and electrical troubleshooting skills, strong customer service, and a commitment to excellence in every service interaction. You'll work directly with hospitals, research institutions, and other healthcare facilities to ensure that critical equipment performs safely and efficiently. This position is ideal for candidates with a mechanical or electrical technical background who enjoy problem-solving, working independently, and building trusted relationships with customers. The salary for this role is $40,000 plus commission. The service territory is in Eastern Ohio, West Virginia and Pittsburgh, PA, so candidates must live within this region. Responsibilities: Troubleshoot, repair, modify, and refurbish industrial sterilization equipment and system components. Perform preventive and corrective maintenance on equipment from multiple manufacturers, including Getinge (CASTLE), Steris (AMSCO), Consolidated, Tuttnauer, and others. Conduct installations and equipment modifications as required. Maintain accurate service documentation, reports, and inventory records in accordance with company standards. Deliver an exceptional customer experience through proactive communication and dedication to resolving performance issues. Plan and manage service schedules to ensure timely response and completion of all assignments. Maintain professional, courteous communication with customers, contractors, and colleagues. Provide on-site training or demonstrations to customers on the proper use and maintenance of equipment. Identify and communicate opportunities for equipment upgrades, service contracts, or replacement solutions. Use company-provided technology (laptop, CRM, service reporting software) to complete and submit service call reports within 24 hours of completion. Manage personal tools, parts, and inventory efficiently to support field operations. Ensure compliance with company safety policies and all customer site protocols. Requirements High school diploma or equivalent required; technical school training in mechanical, electrical, or electronic systems preferred. Valid driver's license and clean driving record required. 1-3 years of related field service or technical maintenance experience; or 3-5 years of hands-on experience without formal training. Strong technical, troubleshooting, and mechanical aptitude. Familiarity with the repair and maintenance of Getinge (CASTLE) and/or Steris (AMSCO) washing and sterilization equipment preferred. Working knowledge of electrical, plumbing, and mechanical systems. Excellent organization, communication, and problem-solving skills. Proficiency with computers and Windows-based software applications. Ability to lift up to 50 lbs. and perform physical work (standing, bending, climbing). Willingness to travel frequently (60-90%) to customer sites, which may include hospitals, operating rooms, laboratories, and research facilities. Flexibility to accommodate customer schedules and respond to emergency service calls as needed. Benefits What we offer: At Prescott's, we prioritize your well-being and growth with a comprehensive benefits package including: * Paid time off. * Healthcare insurance (medical dental and vision coverage). * Accident insurance, critical illness, and hospital indemnity insurance. * Short term (employee paid) and long-term disability (employer paid). * 401K plan with company matching. * Car daily per diem and company cell phone. * Continuous learning and development - offering opportunities for training, workshops, and certifications. * Our fun and inclusive work environment celebrates diversity and fosters growth, making every day an opportunity to thrive.

Definition The Recovery House Technician is responsible for providing safety and support services to residents of Renewal, Inc.'s sober living environment. This individual will monitor resident activity and behavior, enforce recovery house program guidelines and house rules, conduct regular security patrols of the facility, conduct property searches of newly arriving residents, collect and test resident urinalysis samples, and work closely with recovery housing staff to address resident needs. This individual will work collectively with other recovery housing and Renewal, Inc. staff to provide a recovery-focused atmosphere conducive to long-term recovery. Eligibility Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience This individual must possess excellent written and verbal communications skills and must possess a high level of personal ethical standards. Proven skills in problem solving as well as research and computer skills necessary. Minimum of a High School diploma or GED equivalency and 1 year related experience required. An Associate's Degree in Criminal Justice, Social Work, Psychology, Counseling is preferred. Experience working in a recovery housing setting preferred. Valid Pennsylvania driver's license and PA Act 33/Act 34 clearance required. Equal Opportunity Employer/Minorities/Female/Protected Veteran/Individuals with Disabilities

Shape Your World At Alcoa, you will become an essential part of our purpose: to turn raw potential into real progress. The way we see it, every Alcoan is a work-shaper, team-shaper, idea-shaper & world-shaper. This is your opportunity to shape your career through the skills and experience you bring to the role now and by training for the roles you may want in the future. Our success depends on great teams, where you can thrive and do your best work in a supportive environment. About the Role: In this role, the Assistant Lab Technician will be an integral part of the Analytical Chemistry team who support all R&D projects and production teams at ATC and our Partners. Your primary tasks will be supporting electrode production QC, sample preparation for microscopy, and conducting standard test methods to characterize materials. Support operational tasks to meet project requirements including, but not limited to, sample cut up, polishing, and imaging, mounting and prep of microscopy specimens, accountability for department inventory, and execution/reporting of analytical testing. Troubleshoot & perform preventative and unplanned maintenance on all process equipment. Prepare and test samples using laboratory analytical equipment consisting of LECO, chemical analysis, density measurements, dimensional measurements, and others. Must be able to prioritize safety while working with laboratory hazards including radiation sources, acids and bases, and human/environmental toxins. Must be able to communicate clearly and effectively. Due to continuous operations, the employee may be required to provide technical support outside traditional work hours. Verifies daily that samples are being documented that the proper analyses are being completed for each sample and that data reports are being properly updated. Keeping track of inventory and placing orders Will support Analytical and project team personnels' initiatives to ensure on time delivery. Gain knowledge about Alcoa EHS standards, protocols, and tools to ensure that safety protocols are being followed accordingly. What you can bring to this role (Qualifications): High school diploma, GED, or college degree in scientific discipline. Prior experience working in a lab, manufacturing or industrial environment, preferred. Ability to perform material handling, weighing, completing process steps in sequence, and documenting process data. Must have strong attention to detail and follow complex work plans/instructions to maintain workflow and quality integrity. Special Instructions: Wear task specific PPE. Comfortable working in a relatively noisy environment. Must be able to lift >50 lb. Flexible with schedule changes. What we offer: Shift differentials, overtime & holiday pay 120 hours of paid vacation per year (pro-rated based on hire date your first year). Flexible spending accounts and generous employer contribution to the HSA 401(k), employer match up to 6%, additional employer retirement income contribution (no vesting period), and a non-qualified deferred compensation plan 10 holidays and one flexible holiday of your choice. 56 hours of sick/safe leave 4 hours of Paid annual volunteer hours Alcoa has been chosen as one of America's Greatest Workplaces 2023 by Newsweek #LI-TL2 About the Location Every day is a new and exciting challenge at the Alcoa Technical Center in New Kensington, PA, just north of Pittsburgh. We develop new technologies with our Breakthrough Technologies team that has the potential to impact the life of millions of people and foster the sustainable footprint from Alcoa to the world. It was here where we developed the technology recently announced in partnership with Rio Tinto, called ELYSIS™, where we will produce aluminum with ZERO emission of greenhouse gases. In fact, we will actually be generating oxygen to our atmosphere during the aluminum production process- a revolution to the aluminum industry! We are values led, vision driven and united by our purpose of transforming raw potential into real progress. Our commitments to Inclusion, Diversity & Equity include providing trusting workplaces that are safe, respectful and inclusive of all individuals, free from discrimination, bullying and harassment and that our workplaces reflect the diversity of the communities in which we operate. As a proud equal opportunity workplace and affirmative action employer, Alcoa is dedicated to providing equal opportunities and equal access to all individuals regardless of a person's gender, age, race, ethnicity, sexual orientation, gender identity, religion, nation of origin, disability, veteran status, language spoken or any other characteristic or status protected by the laws or regulations in the places where we operate. If you have visited our website in search of information on U.S. employment opportunities or to apply for a position, and you require an accommodation, please contact Alcoa Recruiting via email at ***********************. This is a place where you are empowered to do your best work, be your authentic self, and feel a true sense of belonging. Come join us and shape your career! Your work. Your world. Shape them for the better.

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris Great Lakes a division of the Morris Group, Inc, supplies CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in western New York, western Pennsylvania and West Virginia. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. Summary of Responsibility: The Field Service Technician will have an understanding of electrical, pneumatic, and hydraulic schematics to effectively detect and resolve issues with electrical and mechanical components. Duties include, but are not limited to: Daily travel from home to customer facilities with overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. Install, commission, calibrate, maintain, address, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. Demonstrate a willingness to help others and be a productive team member. Ensure accurate documentation is completed and connect with office management daily. Efficiently update the status of machine issues, repairs, and installations using the Salesforce Lightning Customer Support computer system. Maintain an in-depth knowledge of machine tool industry and product lines represented by the company. Promote and perform preventative maintenance and successfully diagnose and resolve CNC equipment issues to the customer's satisfaction. Qualifications & Competencies Minimum of one year of experience with a machine tool builder or distributor, a factory maintenance technician would also be considered. Proficient verbal and written communication and Customer relation skills. Able to interact and optimally communicate in person and over the phone with customer and co-workers. Present a professional image. Must be adaptable to changes and flexible when dealing with delays, or general work-related issues Basic digital literacy and understanding of MS Word, Excel, and Outlook. Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background, is a plus. Basic mechanical and logical solving skills and ability to read and interpret drawings and schematics are required. Rational decision making and problem-solving skills. Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. Other Functions: Perform related duties as required The duties listed above are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What's in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Paid Time Off, starting with 23 paid days off in your first year. 10 Company Paid Holidays Comprehensive Health Benefits including, Medical, Vision, Dental and Life Insurance 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be highly mobile, able to access all areas of the premises. Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. Ability to sit for prolonged period of times. Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. Ability to frequently use hands and arms. Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Ability to keep their composure with the public and co-workers in everyday, stressful situations. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1486B- Pittsburgh, PA

Summary: Responsible for safe, and effective operation of industry specific equipment with the primary purpose of performing inspections of sanitary sewer and storm water collection systems. As a contracted employee of JARBO Employment Group we expect you to have a positive attitude, to lead by example, demonstrate sound decision-making skills, encourage great team work, inspire those around you, and demonstrate a good stress tolerance. We want to see you embrace and immerse yourself in our client's culture. Primary Responsibilities: Perform engineering field inspections including, but not limited to: manhole inspections, smoke testing, flow monitoring, GPS locates, and water dye testing. Install flow monitoring systems within sewer manholes. Inspect manholes manually or with telemonitoring equipment Operate and maintain instruments and equipment. Accurately document inspections in a timely manner with detailed field notes. Obtain and maintain all required safety training and certifications which could include, but are not limited to: OSHA 10 Hour, confined space, CPR/First Aid, defensive driving, and spotter's training. Adhere to all the safety requirements of the position while assisting team members to do the same. All other duties as assigned.

Job Description Prescott's is a leading medical device services company, trusted by healthcare professionals across the country. We specialize in the distribution and expert refurbishment of essential medical equipment, including sterilizers, surgical microscopes, pumps, monitors, anesthesia machines, and more. Our mission is to enhance the quality of healthcare by ensuring providers have access to reliable, high-performing equipment. If you're passionate about supporting the frontlines of care through innovation and service, we'd love to have you on our team. This position will support Preventative Maintenance Medical - a subsidiary of Prescott's, Inc. As a Field Service Technician, you will be responsible for servicing, repairing and installing medical sterilizers. This is a hands-on, field-based position that requires mechanical and electrical troubleshooting skills, strong customer service, and a commitment to excellence in every service interaction. You'll work directly with hospitals, research institutions, and other healthcare facilities to ensure that critical equipment performs safely and efficiently. This position is ideal for candidates with a mechanical or electrical technical background who enjoy problem-solving, working independently, and building trusted relationships with customers. The salary for this role is $40,000 plus commission. The service territory is in Eastern Ohio, West Virginia and Pittsburgh, PA, so candidates must live within this region. Responsibilities: Troubleshoot, repair, modify, and refurbish industrial sterilization equipment and system components. Perform preventive and corrective maintenance on equipment from multiple manufacturers, including Getinge (CASTLE), Steris (AMSCO), Consolidated, Tuttnauer, and others. Conduct installations and equipment modifications as required. Maintain accurate service documentation, reports, and inventory records in accordance with company standards. Deliver an exceptional customer experience through proactive communication and dedication to resolving performance issues. Plan and manage service schedules to ensure timely response and completion of all assignments. Maintain professional, courteous communication with customers, contractors, and colleagues. Provide on-site training or demonstrations to customers on the proper use and maintenance of equipment. Identify and communicate opportunities for equipment upgrades, service contracts, or replacement solutions. Use company-provided technology (laptop, CRM, service reporting software) to complete and submit service call reports within 24 hours of completion. Manage personal tools, parts, and inventory efficiently to support field operations. Ensure compliance with company safety policies and all customer site protocols. Requirements High school diploma or equivalent required; technical school training in mechanical, electrical, or electronic systems preferred. Valid driver's license and clean driving record required. 1-3 years of related field service or technical maintenance experience; or 3-5 years of hands-on experience without formal training. Strong technical, troubleshooting, and mechanical aptitude. Familiarity with the repair and maintenance of Getinge (CASTLE) and/or Steris (AMSCO) washing and sterilization equipment preferred. Working knowledge of electrical, plumbing, and mechanical systems. Excellent organization, communication, and problem-solving skills. Proficiency with computers and Windows-based software applications. Ability to lift up to 50 lbs. and perform physical work (standing, bending, climbing). Willingness to travel frequently (60-90%) to customer sites, which may include hospitals, operating rooms, laboratories, and research facilities. Flexibility to accommodate customer schedules and respond to emergency service calls as needed. Benefits What we offer: At Prescott's, we prioritize your well-being and growth with a comprehensive benefits package including: * Paid time off. * Healthcare insurance (medical dental and vision coverage). * Accident insurance, critical illness, and hospital indemnity insurance. * Short term (employee paid) and long-term disability (employer paid). * 401K plan with company matching. * Car daily per diem and company cell phone. * Continuous learning and development - offering opportunities for training, workshops, and certifications. * Our fun and inclusive work environment celebrates diversity and fosters growth, making every day an opportunity to thrive.