Field technician jobs in Windham, NH - 1,566 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Generous quarterly profit-sharing bonuses and plenty of overtime available, In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Ability to pass a comprehensive background check and drug screening Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $23-$26 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

TEKsystems is seeking a Traveling Field Technician to support customers across Northern Massachusetts, New Hampshire, Vermont, and Maine. In this role, you will serve as a trusted technical expert responsible for diagnosing, repairing, and maintaining HP Indigo digital printing presses to ensure peak performance and customer satisfaction. This position combines hands-on technical work with customer-facing responsibilities, including on-site troubleshooting, operator training, and the use of advanced AI-driven diagnostic tools for proactive service. We provide extensive HP Indigo press training, so candidates must be eager to learn and develop new skills. Strong electromechanical aptitude is essential-this includes the ability to use a multimeter, interpret electrical diagrams, and apply mechanical problem-solving skills to resolve complex issues. Key Requirements: * Excellent communication and customer service skills. * Reliable transportation and willingness to travel long distances within the region. * Prior experience with commercial printing presses or color copiers is preferred but not required. This is a long-term opportunity for highly motivated entry-level to intermediate IT hardware technicians looking for a stable role where they can grow and build a career. *Job Type & Location*This is a Contract position based out of Worcester, MA. *Pay and Benefits*The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) *Workplace Type*This is a hybrid position in Worcester,MA. *Application Deadline*This position is anticipated to close on Jan 23, 2026. h4>About TEKsystems: We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. About TEKsystems and TEKsystems Global Services We're a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We're a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We're strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We're building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at TEKsystems.com. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

OVERVIEW: The Marine/Service Technician is responsible for the repair and overhaul of boats, machinery and trailers. KEY TASKS: Examine boat and discuss the nature and extent of damage or malfunction with the service advisor or customer. Perform diagnostics and repair of all types of marine engines and transmissions/drives/generators. Perform mechanical repair work such as: remove engine, transom or outdrive disassemble unit and inspect parts for wear overhaul or replace carburetors, blowers, generators, distributors, starters, pumps, electrical and fuel systems rebuild parts such as engine cylinder blocks rewire ignition system, lights and instrument panel replace and adjust taillights install and repair accessories such as radios, heaters, mirrors, and windshield wipers Operate a hydraulic jack or hoist as needed. Advise customers and/or insurance adjusters as to necessary repairs. Complete repair work utilizing service scheduler and SSO's within the established timeframe Ensure all warranty work is completed according to manufacture's and MarineMax guidelines Safely operate MarineMax and customer vessels during diagnostic water testing operations Maintain MarineMax tools in good condition and according to guidelines Other duties as assigned KEY RESULT AREAS: Internal/external customer satisfaction/FANS Timely and accurate completion of work Maintain 100% productivity MarineMax and its subsidiaries uses E-Verify, an Internet-based system, to confirm the eligibility of all newly hired employees to work in the United States. Learn more about E-Verify, including your rights and responsibilities.

Service Technician - Every day is an opportunity for you to turn an apartment into a home. #WRK4UDR. UDR, Inc. and its affiliated companies are seeking a Service Technician to join our team at 100 Pier 4, our apartment community (369 homes) located in Boston, MA. Key Qualifications: Technical of vocational certificate and/or degree preferred. Minimum of two years of experience in building and mechanical maintenance including plumbing, electrical, appliance repair painting and drywall. Knowledge and experience of HVAC and carpentry a plus. EPA Type II or Universal certification preferred. Valid driver's license and rotating on-call responsibility required. Some locations require certification in pool operation (CPO). Essential Job Functions: Respond to resident requests for maintenance and service by taking appropriate action to repair and/or restore service within the quality and time standards established by the organization. Maintain the overall appearance and cleanliness of the community by ensuring that grounds, amenities, building exteriors/interiors, market ready units, breezeways, curbs, signage, leasing office, central garbage areas, parking lots and other buildings and common areas are free of debris, trash, graffiti, and other items which affect the appearance of the community. All deficiencies and or risk management safety issues are reported immediately. Ensure that apartments are ready for occupancy by performing various and as needed electrical, HVAC, plumbing, carpentry, appliance repair, and other miscellaneous equipment maintenance and repairs, as well as carpet cleaning, painting, and overall apartment cleaning or other activities as necessary or as directed. Maintain tools, equipment, and workspace and ensure they are organized and in proper working order, request replacements as necessary, and assist in stocking the inventory. Provide superior customer service to internal and external customers. Perform other duties as assigned or as necessary. Exceptional Benefits: We offer a comprehensive benefit package and discounts to live in our premier communities! UDR, Inc., an S&P500 company, is one of the nation's largest owners and managers of residential apartment communities with a mission of offering remarkable apartment homes in the most desirable locations throughout the United States. Share your expertise, skill and commitment to excellence with us, and be a part of UDR's team. #WRK4UDR Pay: $22-$26/hr. UDR is proud to provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. UDR is committed to providing and maintaining a diverse workforce and an inclusive work environment with equitable access and opportunity for associates to participate, grow, and reach their full potential. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Want to build a brighter, bolder future and cultivate your career? Join Ecolab's team and help create a world in which we all thrive. Nalco Water, an Ecolab company, helps customers conserve more than 161 billion gallons of water annually. We serve industries from food & beverage to mining and manufacturing, delivering innovative solutions that reduce, reuse, and recycle water while protecting systems and equipment. Our team combines deep technical expertise with smart technology to drive efficiency, sustainability, and performance. Ecolab is seeking a Field Service Technician where your hands-on skills and customer-first mindset will help shape a more sustainable future. You'll be part of a purpose-driven team that supports water treatment and disinfection systems across a variety of industries. You'll work independently in the field, building trusted relationships with customers and delivering solutions that protect vital resources and improve operational performance. How You'll Make an Impact Deliver expert service and support for cooling tower cleaning and water disinfection Provide technical support and escalate complex challenges as needed Build strong relationships with customers and promote best practices Ensure full compliance with safety policies and procedures Execute required chemistry tests, log, and report data, and maintain product inventories at customer accounts Provide routine service support to Sales Representatives in strategic district accounts to execute agreed upon customer system assurance plans Provide technical support to customers; identifying and resolving customer pain points, escalating as required Install, calibrate, and maintain chemical feed equipment and process monitoring equipment at customer accounts Position Details: This position will be based in Boston, MA The territory for this position covers a 75 mile radius Targeted accounts are within the Light industries Up to 5% overnight travel per month What's Unique About This Role: You'll work in a dynamic, hands-on environment with autonomy and support You'll help customers meet sustainability goals while protecting their critical assets You'll gain access to industry-leading training and development programs Minimum Qualifications: High school diploma or equivalent 1 year of experience in water treatment or an industrial/mechanical environment Position requires a current and valid Driver's License with no restrictions No immigration sponsorship available for this position Physical Requirements of Position: Lifting up to 50 pounds Exposure to hot, cold, noisy, or dirty environments Stooping, kneeling, crouching, reaching, balancing, walking, standing, climbing Ecolab is committed to providing reasonable accommodation to qualified individuals with a disability. Preferred Qualifications: Associate's degree or trade school certification Demonstrated mechanical aptitude Experience in water treatment or specialty chemical industry Familiarity with boilers, cooling towers, and wastewater treatment systems Proficiency with Microsoft Office Suite What's in it For You: Starting on Day 1: Access to our comprehensive benefits package including medical, dental, vision, matching 401K, company-paid pension, stock purchase plan, paid parental leave, select discounted childcare resources, and more! The opportunity to take on some of the world's most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments. The ability to make an impact and shape your career with a company that is passionate about growth. The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best. About Ecolab: At Ecolab, we prioritize our talent-first philosophy by creating the most capable and diverse team to excel at our nearly three million customer sites. Building on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. Our solutions not only enhance operational efficiency but also contribute to sustainability and public health, making a positive impact on the world. We are committed to eliminating unnecessary complexities and embracing a beginner's mindset, continuously seeking new perspectives and innovative solutions to stay ahead in a rapidly changing world. Annual or Hourly Compensation Range The pay range for this position is $38,700 - $58,100. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. You must have prior experience with laptop and desktop hardware. As part of your onboarding, you will be certified in Dell and Lenovo. All certifications are free to you. Job Details This is a 1099 Contract position. Call volume varies but is typically between 2-5 calls per day. Pay is based on the number of calls completed. Pay starts at $35 per call. You will be completing hardware part replacements for Dell and Lenovo warranty services. Pay period -every Friday after the first week of completing tickets. You must have a reliable form of transportation to run these calls. You must have access to a computer and the internet to log onto your portal. Tickets are run Monday through Friday. You must be able to log into your tech portal every workday by 9 am to accept, code (update status), and map out your calls. You will be responsible for contacting your customers and confirming a window to go onsite to complete the service. Parts will be provided for you by the manufacturers. They are typically held at FedEx for you to pick up in the morning. You will be provided with shipping labels and materials to return the removed parts.

About Culligan QuenchCulligan Quench's purpose is to impact people's lives and improve the earth by helping to eliminate the 500 million plastic bottles consumed each year. We play a front-line role in the battle against single-use plastic water bottles by delivering on-demand filtered water solutions to more than 120,000 healthy and environmentally conscious customers across North America. Our bottle-free water coolers, ice machines, sparkling water dispensers and coffee brewers purify the existing water supply, providing an endless supply of clean water and water-based beverages for a fixed monthly fee, typically under a long term bundled service and rental subscription agreement. Culligan Quench has grown from a small regional company to an international leader that had a successful NYSE public offering in 2016 and is now a strategic company owned by private equity backed Culligan. Headquartered in King of Prussia, PA, Quench has more than 1,600 team members operating out of more than 90 locations across North America and Puerto Rico. For more information visit **************************** About CulliganFounded by Emmett Culligan in 1936, Culligan is a world leader in delivering superior water solutions that will make a real difference in improving the health and wellness of consumers. The company offers some of the most technologically advanced, state-of-the-art water filtration and treatment products. These products include water softeners, drinking water systems, whole-house systems and solution for businesses. Culligan's network of franchise dealers is the largest in the world, with over 900 dealers in 90 countries. Many of Culligan dealers have valuable equity in their local communities as multigenerational family owners of their franchises. For more information visit ***************** Values: 5CsCulligan as OneCustomers come first Commitment to InnovationCourage to do what's right Consistently deliver exceptional results Field Service TechnicianPay: $27.00 to $27.50 per hour (based on experience and location) Schedule: Monday - Friday, 7:00 AM-4:00 PM (may vary by market) Please Apply Only if You Have All of the Following:Mechanical aptitude: Experience working with tools or repairing equipment.Driving experience: Comfortable operating a vehicle for work purposes and familiar with routes/GPS (experience may be in a company or personal vehicle).Professional, service-minded demeanor: Good customer service and communication skills.Valid, active driver's license.At least 21 years of age (required to operate company vehicles). What We OfferCompetitive hourly rate with overtime potential.Medical, Dental, and Vision insurance starting Day 1.401(k) match of 50% up to 6%.10 paid holidays plus PTO.Company take-home vehicle, gas card, and tools.Paid training and ongoing career development opportunities. Position OverviewThe Field Service Technician installs, maintains, and repairs company equipment, including filtered water systems, ice machines, sparkling water dispensers, and coffee brewers. This role is customer-facing and requires a professional demeanor, technical skill, and a commitment to safe work practices. We provide hands-on training to ensure success in the position. ResponsibilitiesDrive a company vehicle to customer locations to install, troubleshoot, and maintain equipment.Routinely replace water filters, clean and sanitize tanks, change UV bulbs, and clear water lines.Inspect equipment for leaks, malfunctions, and safety concerns.Follow company and customer safety policies and site procedures.Maintain company vehicle per policy, including mileage and maintenance logs.Safely transport and operate equipment and tools.Document service work using a tablet or mobile device.Provide professional and timely customer service at each site visit.Maintain regular and reliable attendance. RequirementsBasic computer skills to record service and communicate with team members.Ability to lift 70+ lbs, bend, squat, and climb ladders.High school diploma or equivalent (technical school training preferred).Ability to pass a pre-employment background check and drug screen.Beware of fake job offers falsely claiming affiliation with our company. • We never request banking details or other personally identifiable information during interviews.• Our recruiters will never ask prospective employees for payment to apply for a position or as a condition of employment.• Official emails are from our domain. Our approved emails will come from @quenchwater.com. Verify offers through our official HR channels to safeguard your privacy and security. If you have any questions or suspicions regarding the authenticity of any job posting or communication allegedly by or on behalf of Quench, please contact us immediately at ******************** We are proud to be an Equal Opportunity Employer. Quench provides equal opportunity in all of our employment practices to all qualified employees and applicants without regard to sex, sexual orientation, race, color, religion, gender, national origin, ethnicity, age, disability, marital or family status, pregnancy, military status, veteran status, genetic information or any other category protected by federal, state and local laws. This policy applies to all aspects of the employment relationship, including recruitment, hiring, compensation, promotion, transfer, disciplinary action, layoff, return from layoff, benefits, training, social and recreational programs. All such employment decisions will be made without unlawfully discriminating on any prohibited basis. Equal Opportunity EmployerThis employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Are you looking to power the next leap in the exciting world of advanced electronics? Do you want to help solve problems that drive success in the rapidly evolving technology and connectivity landscape? Then bring your problem-solving, passion, and creativity to help us power the next leap in electronics. At Qnity, we're more than a global leader in materials and solutions for advanced electronics and high-tech industries - we're a tight-knit team that is motivated by new possibilities, and always up for a challenge. All our dedicated teams contribute to making cutting-edge technology possible. We value forward-thinking challengers, boundary-pushers, and diverse perspectives across all our departments, because we know we play a critical role in the world enabling faster progress for all. Learn how you can start or jumpstart your career with us. Core Responsibilities: Leverage galvanic plating and metallization experience and knowledge to work directly with Electronic and Industrial Finishing and PCB customers and/or advanced semiconductor packaging customers to identify material needs and requirements to then promote Qnity products that meet those needs. Provide technical expertise to customers in the areas of product development and application, processing techniques and problem resolution. Serve as a technical expert to sales professionals, distributors, customers and other internal/external partners. Help translate product data into effective sales and marketing tools. Assists with regulatory and environmental product issues, product improvements, positioning of existing product offerings and new business product developments. Effectively build customer relationships to go deeper into & across all key roles/functions (key engineers, influencers, & decision makers), as well as multiple levels throughout customers organization. Leverage customer relationships and intimacy, as well as all other available internal/external resources to understand customer technology trends, competitive environment and strategic customer needs and to build thorough customer intelligence including customer products and technologies, customer utilization rates, TAM, competitor situation, and material selection process. Demonstrate Commercial Excellence in all aspects from preparing and delivering professional polished presentations driving key takeaway messages, documenting and sharing Mtg Minutes and Call/Trip Reports across the organization. Independently manage customers with confidence to Qnity's business interests, such as proactively managing customer expectations, being prepared with counter points to defend against price reduction requests or to effectively manage price increase communications to maintain healthy margins. Work effectively with other functional groups (such as Marketing, R&D, Applications Technical Support, Customer Service, Supply/Demand Planning, Logistics, Quality, etc.) to deliver a high level of service to customers - effectively become the customer's “Go-To” solutions provider, and maintain and defend position by resolving any quality, supply or performance issues raised by customers to become Partner of Choice. Key Competencies: Strong Business Acumen Interpersonal Effectiveness Bias for action and Results Oriented Customer Orientation and Market Focused Strategic Focus Required Qualifications: Bachelor's degree, in Science or Engineering discipline, required. Advanced degree is a plus. Expert knowledge in PCB or Electronic plating industry, Semiconductor Manufacturing process, Semiconductor Customers, and Advanced Packaging and/or Assembly Test Technologies 5+ years PCB, Electronics or semiconductor industry experience preferred. Capability as a technical competency SME and/or a product SME Proficient understanding of own business unit's business and expands understanding of the company's diverse businesses Able to build technical network and gains exposure to customers Acts as a resource for technical professionals with less experience; has the ability to understand and influence others Leads technical sub-teams and works with others to define the scope of the larger project space Location: Hybrid in Marlborough, MA Ability to travel to customer sites within NA Region 25-50%, and/or global travel 1 to 2 times a year Fluent in communications with English Highly self-motivated and target driven Excellent selling, communication, and negotiation skills Prioritizing, time management and organizational skills Ability to create and deliver presentations tailored to the audience interests and needs. Advantageous: Knowledge of Semiconductor Manufacturing process, Advanced Packaging and/or Assembly Test Technologies or Electronic Industrial Finishing #LI-LH1 #LI-Hybrid Join our Talent Community to stay connected with us! Qnity is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. Qnity offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page. We use Artificial Intelligence (AI) to enhance our recruitment process.

$24-26/hour The Facilities Field Staff is responsible for assisting and performing repairs and improvements to the agency-owned real estate. Minimum Education Required High School Diploma/GED Additional Shift Details Monday through Friday Responsibilities Perform repairs and maintenance duties for all the agency sites as assigned. Perform walk-thru and repairs, as well as attend various inspections as needed for the agency's sites. Maintain company assigned vehicle and ensure routine maintenance is scheduled as needed. Follow all work order procedures including accessing work orders through database and updating work orders upon completion. Responsible for purchasing necessary supplies and materials for repairs as needed. Responsible for maintaining proper upkeep of company tools and equipment. Attends and actively participates in supervision and team meetings. Ensure that clients are treated with dignity and respect in accordance with Advocates' Human Rights policy. Adhere to all principles related to the Advocates Way Perform all duties in accordance with the agency's policies and procedures. Qualifications High School Diploma or GED required and minimum of 5 year experience in maintenance and general repairs Must possess ability to multi-task in a fast-paced environment. Strongly prefer that a candidate will have a demonstrated understanding of and competence in serving culturally diverse populations Must be able to perform each essential duty satisfactorily. Must be able to perform with minimal supervision Must possess ability to use office equipment such as scanner, digital camera, copier, printer, fax and phone systems. Must have strong computer skills Must possess ability to read a map and be willing to travel. Must possess excellent customer service and interpersonal communication skills. Must possess ability to work independently or as part of team. Must possess ability to read and speak English and communicate effectively verbally and in writing. Must hold a valid drivers' license. Advocates is committed to cultivating a diverse and welcoming community where everyone feels respected and valued. Advocates fosters a culture of inclusion that celebrates and promotes diversity along multiple dimensions, including race, ethnicity, sex, gender identity, gender expression, sexual orientation, partnered status, age, national origin, socioeconomic status, religion, ability, culture, and experience.

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Milton CAT is seeking a highly driven person for our Paving Technical Communicator to work in our Maine, New Hampshire and Vermont region. This candidate will work within the Service Organization to support earthmoving equipment product line. Will act as liaison between CAT, Weiler and Milton CAT. Maintain high standards of customer service by providing technical support to technicians, managers, and supervisors. Note: We are recruiting for one open position and have advertised this position in multiple cities within our territory. Responsibilities Technical Support & Communication Assist service departments in ME, NH, and VT with timely and accurate repairs on CAT and Weiler paving equipment. Act as a liaison between Milton CAT and Caterpillar (CAT) to facilitate the flow of technical information. Provide backup coverage for Technical Communicators in other regions. Training & Product Introduction Present New Product Introductions (NPIs) for machines within the specialist group. Conduct training sessions as required to technicians on paving product. Shop and Field Support Help technicians diagnose equipment issues. Maintain ongoing communication with technicians regarding product issues and updates. Maintain communication with Shop and Field Management. Paving Product Focus Serve as the Technical Communicator for paving products in ME, NH, VT. Support growth in parts and service for paving products. Assist existing Product Support Consultants with paving product opportunities. Qualifications To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and ability required. Minimum of 5 years working with Earthmoving equipment in roles such as mechanic, Technical Communicator, or Trainer. Prefer high level of experience with paving industry in general. High level of Product Knowledge and Familiarity with the CAT product line. Strong oral and written communication skills, along with excellent -interpersonal skills. Ability to communicate effectively across various personnel levels. Strong mechanical knowledge and aptitude. Proficiency with CAT tools such as SIS (Service Information System) and ET (Electronic Technician). High level of Organizational Skills: Capable of managing multiple tasks simultaneously. Must hold a valid driver's license with a clean driving record. This job description is not intended to be all-inclusive. Your supervisor may request and assign you similar duties. Resumes that are mailed, emailed or hand-delivered to Milton CAT or any employee will not be considered. You must apply online. Background check and drug screening are required as part of our pre-employment process. Milton CAT is an equal opportunity employer that values the strength diversity brings to the workplace. We encourage applications from individuals with disabilities, minorities, veterans, and women. Applicants receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, sexual orientation, gender identity, handicap, disability, veteran status, genetic data, or other legally protected status. We base all employment decisions to further this principle of equal employment opportunity. VEVRAA Federal Contractor. EEO/AA employer.

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here. Job Posting External Job Duties * Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. * Perform all assigned planned maintenance on customer lift trucks. * Maintain a service van and its inventory. * Process paperwork after completion of each job. Minimum Qualifications * Less than 2 years related experience * High school diploma or equivalent * Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications * Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. * Good written/verbal communication and customer care skills. * Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. * Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. * Industry related training is preferred * Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: * Award-Winning Service Training * Company Vehicle for Field Service Technicians * Tool Insurance * No Flat Rate * 40 Hours Per Week plus Overtime * Uniforms * Specialty Tools * Primarily 1st Shift * Career Advancement Opportunities EOE Veterans/Disabilities Nearest Major Market: Woburn Nearest Secondary Market: Boston Job Segment: Maintenance, Warehouse, Welding, Forklift, Electrical, Manufacturing, Engineering

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary This position is for a hands-on Field Service Technician who will support Rivian vehicle repairs. The role requires a collaborative, team-oriented individual capable of working in a dynamic, fast-paced environment. While the role is based in a primary location, it may require operating remotely or traveling to various locations, including the production plant, to provide vehicle support as business needs demand. This job description outlines the full spectrum of skills required, and candidates will be assessed against this spectrum to determine the appropriate level for their expertise. Responsibilities Perform or assist with assigned vehicle diagnosis, repairs, installations, and inspections, whether at a service center or in the field directly at customer homes, businesses, or other convenient locations. Identify and explain the Rivian product line, EV framework, tools, and accessories. Utilize available technical resources to follow Rivian repair procedures efficiently without compromising quality or safety. Conduct road tests to ensure the quality of repairs. Manage necessary parts operations, including ordering, receiving, shipping, and inventory. Identify areas of improvement and provide feedback to senior technicians or leadership. Support service campaigns and containment initiatives. Ensure that all work and technical notes are properly documented for internal and external use. Work collaboratively with a team spirit and maintain high-quality work with minimal supervision. Communicate with a high level of professionalism in customer-facing situations. Stay current with technical skills and complete required training. This role may require regular interaction with customers and their families, 3rd party affiliates, and suppliers within Rivian facilities, on mobile service routes, or at community outreach events. Qualifications General Requirements: High School Diploma or GED is preferred. Proficient in using hand tools and power tools. Must be at least 21 years old. Must possess a valid driver's license and maintain a clean driving record, with no driving-related suspensions or revocations within a 3-5 year period. Ability to drive a non-commercial truck and trailer is preferred. Must be available for a 40-hour work week, which may include weekends, holidays, and shifts during early morning, evening, or overnight hours based on business needs. Proficient with laptops or computers in Windows or Mac environments. Strong organizational skills, attention to detail, and an eagerness to learn. Ability to perform physical tasks such as lifting up to 50 lbs., sitting, standing, walking, and frequent use of hands for grasping tools and data entry. Physical exertion may be required to perform occupational tasks (sitting, standing, walking, bending, kneeling, carrying, reaching, pushing, pulling, and lifting up to 50 lbs.). Ability to read and speak fluent English. Ability to see, read and interpret documents such as governmental regulations, safety rules, operating and maintenance instructions or schematics. Experience: Hands-on work experience in an automotive shop is highly preferred. However, if you are a recent automotive graduate looking for your next opportunity, we encourage you to apply. This role is open to various levels of experience, from entry-level to career technicians A background in electric vehicle (EV) or hybrid repair is considered a plus. Experience in start-up environments is preferred. Experience with parts departments, billing, and work order management systems is preferred. Spectrum of Technical Skills Low Voltage & Electrical Systems: Technicians should have a foundational understanding of basic electricity theory and be able to safely use a DVOM for various circuit measurements. Proficiency should extend to reading and leveraging electrical schematics as a diagnostic resource. Advanced candidates will demonstrate a deep understanding of automotive electronics, including CAN and LIN networks, and possess the ability to diagnose complex faults and perform wiring repairs according to manufacturer standards. High Voltage Systems: A core requirement is understanding the risks involved with high voltage systems and the ability to safely power them down and work on them using appropriate personal protective equipment (PPE). This includes understanding the function of various high voltage components and their monitoring systems. Highly skilled technicians will be capable of diagnosing complex high voltage faults related to charging, isolation, and interlock loop issues using the manufacturer's diagnostic processes. Chassis, Brakes & Suspension: Technicians should be proficient in fundamental chassis service, including the ability to mount and balance tires, perform vehicle alignments, and replace brake system components. The role requires the ability to diagnose mechanical suspension components and progress to repairing advanced vehicle dynamic issues related to traction control, ABS, and power steering. Top-tier candidates will be adept at resolving complex drivability concerns such as Noise, Vibration, and Harshness (NVH). Thermal Systems: Technicians must be able to service vehicle thermal systems, starting with the ability to perform a coolant drain-and-fill and safely handle refrigerant with a 609 certification. A comprehensive understanding of the entire A/C system and its components is expected. An ideal candidate can proficiently use an A/C machine and diagnose a range of thermal system concerns, including issues with coolant systems, air conditioning performance, and HVAC systems. Advanced Driver Assistance Systems (ADAS): A working knowledge of ADAS is required, beginning with a basic understanding of the features and their operation. Technicians will be expected to replace system components and perform necessary calibrations. Advanced understanding includes knowing the functionality and limitations of the complete ADAS system and the specific roles of its various sensors. Body & Glass: The role includes responsibilities related to the vehicle body, from assisting with glass removal and installation to safely replacing windshields and other glued body fixtures. Technicians may be tasked with adjusting body panels to specified tolerances and should be capable of diagnosing and repairing issues such as wind noise and water leaks. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. General Requirements: High School Diploma or GED is preferred. Proficient in using hand tools and power tools. Must be at least 21 years old. Must possess a valid driver's license and maintain a clean driving record, with no driving-related suspensions or revocations within a 3-5 year period. Ability to drive a non-commercial truck and trailer is preferred. Must be available for a 40-hour work week, which may include weekends, holidays, and shifts during early morning, evening, or overnight hours based on business needs. Proficient with laptops or computers in Windows or Mac environments. Strong organizational skills, attention to detail, and an eagerness to learn. Ability to perform physical tasks such as lifting up to 50 lbs., sitting, standing, walking, and frequent use of hands for grasping tools and data entry. Physical exertion may be required to perform occupational tasks (sitting, standing, walking, bending, kneeling, carrying, reaching, pushing, pulling, and lifting up to 50 lbs.). Ability to read and speak fluent English. Ability to see, read and interpret documents such as governmental regulations, safety rules, operating and maintenance instructions or schematics. Experience: Hands-on work experience in an automotive shop is highly preferred. However, if you are a recent automotive graduate looking for your next opportunity, we encourage you to apply. This role is open to various levels of experience, from entry-level to career technicians A background in electric vehicle (EV) or hybrid repair is considered a plus. Experience in start-up environments is preferred. Experience with parts departments, billing, and work order management systems is preferred. Spectrum of Technical Skills Low Voltage & Electrical Systems: Technicians should have a foundational understanding of basic electricity theory and be able to safely use a DVOM for various circuit measurements. Proficiency should extend to reading and leveraging electrical schematics as a diagnostic resource. Advanced candidates will demonstrate a deep understanding of automotive electronics, including CAN and LIN networks, and possess the ability to diagnose complex faults and perform wiring repairs according to manufacturer standards. High Voltage Systems: A core requirement is understanding the risks involved with high voltage systems and the ability to safely power them down and work on them using appropriate personal protective equipment (PPE). This includes understanding the function of various high voltage components and their monitoring systems. Highly skilled technicians will be capable of diagnosing complex high voltage faults related to charging, isolation, and interlock loop issues using the manufacturer's diagnostic processes. Chassis, Brakes & Suspension: Technicians should be proficient in fundamental chassis service, including the ability to mount and balance tires, perform vehicle alignments, and replace brake system components. The role requires the ability to diagnose mechanical suspension components and progress to repairing advanced vehicle dynamic issues related to traction control, ABS, and power steering. Top-tier candidates will be adept at resolving complex drivability concerns such as Noise, Vibration, and Harshness (NVH). Thermal Systems: Technicians must be able to service vehicle thermal systems, starting with the ability to perform a coolant drain-and-fill and safely handle refrigerant with a 609 certification. A comprehensive understanding of the entire A/C system and its components is expected. An ideal candidate can proficiently use an A/C machine and diagnose a range of thermal system concerns, including issues with coolant systems, air conditioning performance, and HVAC systems. Advanced Driver Assistance Systems (ADAS): A working knowledge of ADAS is required, beginning with a basic understanding of the features and their operation. Technicians will be expected to replace system components and perform necessary calibrations. Advanced understanding includes knowing the functionality and limitations of the complete ADAS system and the specific roles of its various sensors. Body & Glass: The role includes responsibilities related to the vehicle body, from assisting with glass removal and installation to safely replacing windshields and other glued body fixtures. Technicians may be tasked with adjusting body panels to specified tolerances and should be capable of diagnosing and repairing issues such as wind noise and water leaks. Perform or assist with assigned vehicle diagnosis, repairs, installations, and inspections, whether at a service center or in the field directly at customer homes, businesses, or other convenient locations. Identify and explain the Rivian product line, EV framework, tools, and accessories. Utilize available technical resources to follow Rivian repair procedures efficiently without compromising quality or safety. Conduct road tests to ensure the quality of repairs. Manage necessary parts operations, including ordering, receiving, shipping, and inventory. Identify areas of improvement and provide feedback to senior technicians or leadership. Support service campaigns and containment initiatives. Ensure that all work and technical notes are properly documented for internal and external use. Work collaboratively with a team spirit and maintain high-quality work with minimal supervision. Communicate with a high level of professionalism in customer-facing situations. Stay current with technical skills and complete required training. This role may require regular interaction with customers and their families, 3rd party affiliates, and suppliers within Rivian facilities, on mobile service routes, or at community outreach events.

We are growing and are thrilled to be recruiting in the Boston, MA area. Joining a team in our Breast & Skeletal Health you will be responsible for preventative maintenance, repairs and servicing of our innovative medical imaging and interventional products. As a Hologic FSE, you travel to our customer sites to ensure our products are calibrated and optimized for high performance. You will be able to build relationships with our customers, putting them at ease that you are there to investigate and solve any technical issues. Summary Of Duties And Responsibilities Responsible for the installation and service of Hologic products (mammography, digital mammography, bone densitometry, and mini c-arms) which include electrical, mechanical and software components. Establish and maintain a high level of customer satisfaction with Hologic's products, support and service. Complete all remedial service actions, standard system checks, and required hardware and software upgrades in accordance with approved policies and procedures. Assist other Field Engineers as necessary. Maintain a good customer service reputation by complying with all regulatory requirements and all aspects of DQSM. Complete and submit all required paperwork on time and accurately. Train customers on the basic operation and use of Hologic products. Provide feedback to the District Manager concerning product performance anomalies encountered in the field, and make recommendations for service improvements. Provide support at conventions, trade shows and customer trials. Provide pre and post sales support by maintaining close working relationships with sales and customers to ensure expectations are met and equipment installations are handled as planned. Manage inventory, keep accurate records, and return unused and failed parts promptly. Promote service contract offerings and assist the local Service Sales Specialist in selling service agreements to customers within your assigned territory. Manage the assigned territory in an organized fashion. Perform PM's on time, provide expeditious on-site response and minimize equipment downtime. Respond to customer inquiries in written form (with managerial approval), in person, or via telephone as needed. Escalate customer issues and unresolved product problems to service management in a comprehensive and timely manner. Qualifications Must be a self-starter, able to travel and work independently with minimal supervision. Must be capable of multi-tasking, setting priorities and scheduling work activities. Ability to resolve problems, think analytically and communicate professionally in high pressure, time sensitive, customer environments. Willing to work flexible hours and overtime on short notice. Position requires the ability to be “on call” after normal working hours. Depending on location, position may require frequent overnight travel. Must have reliable transportation, possess a valid driver's license, and carry adequate auto insurance. High degree of mechanical aptitude. Excellent communications skills, both written and verbal are required Education Associate's Degree or equivalent in electronics, computer science or related technical discipline is required. Experience 2-4 years experience in a field service position working with customers to resolve problems related to x-ray, digital imaging or related medical equipment preferred. Experience designing, installing, or maintaining computer networks highly desirable. Specialized Knowledge Strong computer literacy. Must be proficient with DOS and Windows, certified training and/or working knowledge of UNIX /NT/Solaris or other software operating systems preferred. The annualized base salary range for this role is $64,900 to $100,100 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs and market demand. Agency And Third Party Recruiter Notice Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition, Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic's employees are subject to third-party COVID-19 vaccination requirements, including from customers and governmental entities. Hologic is an equal opportunity employer and consistent with federal, state, and local requirements, will consider requests for reasonable accommodation based on disability or sincerely-held religious beliefs where it is able to do so without undue hardship to the company. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

Field Service Technician(ElectroMechanical) - Veterans Prime, Inc. Nationwide opportunities | Must be willing to relocate Veterans Prime recruits high-performing military veterans for full-time, direct-hire Field Service Technician roles with employer partners across the United States. These positions provide hands-on technical work supporting industrial, manufacturing, and mission-critical systems and prioritize candidates with military technical experience. Our recruiting services are free to applicants; employer partners cover all hiring fees. We are currently interviewing skilled, motivated individuals for full-time, direct-hire Field Service Technician positions nationwide. Responsibilities Diagnose, troubleshoot, and repair electro-mechanical systems across commercial, industrial, and military platforms. Read and apply schematics, wiring diagrams, and technical manuals to field repairs and installations. Use diagnostic test instruments, including multimeters and related tools, to validate repairs and system performance. Travel extensively for overnight field assignments and represent employer partners in customer-facing environments. Maintain professional customer communication, document service actions, and follow company safety and compliance procedures. Requirements Electro-mechanical troubleshooting experience gained through military, technical, or manufacturing roles involving aircraft, vessels, ground support equipment, vehicles, or industrial machinery. Technical literacy to interpret schematics, wiring diagrams, and technical manuals; proven use of test instruments. Regional flexibility and willingness to relocate to match opportunities across regions (Southeast, Mid-Atlantic, Northeast, Midwest, Southwest, West, Northwest). Comfort with frequent overnight travel throughout the U.S. Strong customer service and communication skills for professional, on-site representation. Compensation and Career Benefits Competitive total compensation ranges typically between $70,000 and $120,000 annually, adjusted by experience, overtime, and travel; individual opportunities may vary. Employment with veteran-friendly employers who value military experience and often include veteran hiring managers. Opportunities for technical skill development, career advancement, and stable, long-term employment. Dynamic, varied fieldwork that places technicians in different environments and customer settings. How to Apply Submit your resume and complete the applicant questions to be considered for a screening call.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Job DescriptionAbout UsHighland Electric Fleets' mission is to make electric fleets accessible and affordable for all, enabling communities to realize the benefits of cleaner, quieter and healthier fleets. Highland is North America's leading provider of Electrification-as-a-Service (EaaS). Founded in 2019, Highland partners with school districts, municipalities, and fleet operators to make the transition to electric fleets simple and affordable. Highland proudly serves as the Official Electric School Bus Provider of the LA28 Olympic and Paralympic Games and Team USA. From pioneering vehicle-to-grid technology to managing some of the nation's largest electric school bus fleets, Highland delivers reliable, cost-effective solutions that support local communities and drive the future of transportation. What You Can Expect from Highland:· Competitive base salary and 10% performance-based bonus program· Mobile Maintenance Work Vehicle provided · Monthly cell phone and internet reimbursement of $130· 100% Health, Vision, and Dental coverage for employees & their dependents· 3 weeks accrued Paid Time Off and 5 Sick Days per year· 401(k) program and company match· Paid CDL and ASE pathing· A supportive, highly collaborative, team-oriented environment The Field Service Technician is enthusiastic about EVs and a self-starter who will work closely with customers to ensure that Highland's electric vehicles and charging stations are working properly and that buses can get students to where they need to be. No day will look the same, but responsibilities will include performing original equipment manufacturer-approved testing, repairs, and troubleshooting customer issues. Highland will provide the relevant training to repair all local equipment including basic electric vehicle functions, Level 2 EV chargers to DC Fast Chargers, and communications equipment.Key Responsibilities: Act as the company's on-site advocate for EV's and EVSBs, striving to achieve 90% overall uptime Represent the company at customer locations with the highest standards of professional conduct Retains a clean and safe work environment and brings any unsafe practices or conditions to management Diagnoses malfunctions and performs electric vehicle and charger repairs (e.g. adjust/test steering, electrical, cooling, lubricating, braking systems, drive trains, suspensions, power steering units, etc.) and related assigned duties within qualification level, in accordance with all relevant Federal, State/Provincial and local guidelines and requirements. Test-drives vehicles to ensure repair resolved Maintain detailed and timely documentation for troubleshooting and repairs, records time and materials used for each assignment in asset management platform Assist in managing of external support vendors to follow up and document repairs being made to Highland's assets Provides repair and maintenance assistance to junior technician staff Performs road calls and on the road repairs as assigned. Undergo electric vehicle and charger OEM and internal trainings Desired Qualifications: Minimum of 5+ years Electrician, Electric Vehicle, or Medium/Heavy duty truck Fleet repair experience Advanced Diagnostic, Electrical, and AC skills required Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Knowledge of MS Suite products Possess the recommended tools for a Medium Duty technician as well as electrical diagnostics tooling Flexibility to work bus depot hours (early morning to afternoon) and weekends (when on scheduled shift) Clean Driving Record is required Requirements within 12 months of employment: Commercial Driver's License Required / Minimum 3 ASE certifications required (bonus compensation available if greater) / and Minimum of 4 OEM Certifications required (bonus compensation available if greater) Highland Electric Fleets provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Highland Electric Fleets complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Field Service Technician Company Overview: Boyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers' products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers' most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years. Position Overview: Boyd is seeking a Field Service Technician for our thermal cooling system service and repair organization. This role consists of installing, troubleshooting, resolving and testing cooling units manufactured by Boyd in parallel with customer installation in a state-of-the-art data center and ensuring all components function properly. This is an exciting new position that will be based in Woburn, Massachusetts with frequent customer-site travel. This position requires you to be on site at our customers' facilities to complete the deployment and service of Boyd manufactured equipment. Position Expectations: Approximately 90% travel, often four to five nights away weekly, on a regular basis. This role covers North America with opportunities for international travel. Perform startups, inspections, troubleshooting, repairs and/or preventive maintenance service on all Boyd products at customer sites. Represent Boyd in a professional and courteous manner while following all Boyd and customer safety requirements. Work closely with Boyd's Project team to successfully complete the deployment of Boyd's thermal cooling systems, which includes members from our customers and various construction trades to ensure installation timelines are met. Competent in replacing subassemblies and performing system-level tests as required. Suggest and make recommendations for improvement to field service engineers, design engineers and management as needed. Ability to perform product commissioning and hand-over to customers from start to finish. Complete written repair reports to document the cause of failure(s), description of work performed, materials consumed, and condition of equipment. Conduct customer training on Boyd cooling products when onsite. Read, understand and use equipment diagrams, checklists, engineering drawings, and other process documentation to perform service tasks, assembly and repairs. Minimum Qualifications 5+ years of field service experience. 3+ years of working with project teams, contractors and interfacing with customers. Strong mechanical aptitude & understanding of electromechanical systems and Cooling Distribution Units (CDU) Ability to read and interpret diagrams (dimensions, assembly, electrical, cooling) Ability to regularly use a forklift, ladder, hand tools, power tools, calibrated measurement devices, and hydraulic equipment. Clean Driving Record Preferred Qualifications High School Diploma (or equivalent) Trade School Certification in HVAC/R Field and/or electronics technology. EPA universal certificate Experience with Liquid Cooling technologies. Knowledge of PLC function & interfacing (RS485, ethernet, etc.). All Job Posting Locations (Location) Woburn Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.