Project Engineer jobs at Greif - 6063 jobs

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding ExpertTM for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Grade and Range: USXX - Grade USXX Hourly 42 Min: 57,093.77 - Mid: 81,562.53 Bonus Plan: OIP Target Bonus: 5.0 Company Overview Fori Automation is a global supplier of welding, assembly, material handling and testing equipment for both automotive and non-automation customers around the world. Headquarters in Shelby Twp., Michigan. Fori automation has facilities located in China, Korea, Germany, India, Brazil, and Mexico. Fori Automation focuses on delivering cost effective highly engineered products and systems that can be designed and manufactured globally with localized sales, project management and service. Position Summary Candidate will work out of Fori's Shelby Twp. Michigan facility and will report to the Controls Engineering Manager for the Assembly Group. Candidate must demonstrate the following to be considered: Engineering a project or acting as the engineer on a small project. Leading an engineering group or acting as a leader of a project. Control panel concept and design based on line-ups from the Mechanical Engineering department. Guarantee the workability, completeness, and accuracy of all designs. Control Project Engineers shall be able to properly understand the design and all the aspects of a control panel. Complete designs include: schematics to layouts and Bill of Materials, standards and regulations. Coordinate with other Project Engineers regarding schedule, design concepts and other status information on areas of concern. Ensure that designs are consistent on the project. Participate in internal and external design reviews of deliverables. Ensure that all designs meet either Fori or customer standards. Fully document and maintain engineering records for incorporation into engineer's job book. Position Summary Continued Read and write software on assigned areas. Ideal candidate shall understand ladder logic, function block diagrams, structured text (SCL) or similar programming languages. Performed startup of any equipment. Provide engineering liaison to manufacturing and field service departments. Create and maintain software design plans. Create and maintain commissioning plans. Develop controls architecture Shall be able to conduct engineering meetings and customer meetings for hardware or software design. Demonstrate experience in startups, new program launches or retrofit projects. Demonstrate knowledge of industrial networking and communication protocols. Requirements Education: B.S.E.E. degree, Controls Engineering or related field. Minimum 4 to 8 years with proven experience in project execution and commissioning Training or certifications on project management, agile or scrum will be considered. A background in controls (PLC, HMI and PC programming) at least on Rockwell or Siemens platforms. Knowledge and experience using AB software such as: Logix Designer, Factory Talk View, Factory Linx, Drive tools. Knowledge of HMI and SCADA development systems (MES, FIS, IIoT). Knowledge on fastener tools or DC tools: Stanley, Atlas Copco or similar. Reporting and documenting using office tools. Strong analytical and problem-solving ability. Excellent communication and teamwork. Ability to manage multiple priorities under tight deadlines. Travel occasionally depending on requirements. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

The Project Engineer in this role is responsible for planning, developing, coordinating, and managing onsite construction engineering activities for large, extensive projects in the heavy civil/power construction industry, encompassing grading, clearing, and site development. Essential Duties and Responsibilities: Track project quantities Generate project billing. Initiate and negotiate change orders. Generate CAD drawings and present solutions to owners for design problems that arise in the field. Review plan changes Assist with work plans. Assist with project schedules. Manage submittal data. Manage material purchase orders. Manage and negotiate subcontracts. Assist in division field personnel management. Assist field personnel in any capacity to handle any problems that may arise. Work with Project Superintendents, Foreman, and Crews to perform work more effectively. Attend pre-construction meetings. Requirements: Must be willing to relocate. Strong organizational skills Strong work ethic Able to multitask and work independently under pressure and tight deadlines. Education and Experience: Four-year engineering degree or equivalent technical training and related experience Excellent communication and interpersonal skills Demonstrated ability to manage a team of varied disciplines. Candidates that accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam is essential to ensure that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

The Senior Project Engineer is responsible for planning, developing, coordinating, and managing engineering activities for multiple construction projects. This role provides technical expertise and project oversight, ensuring that all administrative and engineering aspects align with project goals. Working closely with internal teams and external partners, the Senior Project Engineer plays a critical role in optimizing processes, ensuring regulatory compliance, and maintaining alignment between project plans and on-site execution. This position supports multiple concurrent projects while gradually taking on leadership responsibilities, with the potential for career advancement into a management role. Essential Duties and Responsibilities: · Participate in and support up to 10 concurrent projects. · Collaborate with internal teams and external partners to ensure project success. · Provide regular updates to clients on project status, timelines, and key developments. · Develop, implement, and optimize processes to improve efficiency and productivity. · Lead and mentor team members, facilitating knowledge transfer and professional growth. · Work closely with field employees to ensure alignment between project plans and on-site execution. · Monitor the work of the engineering firm, providing direction and ensuring alignment with project goals and timelines. · Assist in budgeting, scheduling, and resource allocation. · Ensure compliance with industry regulations, company policies, and safety standards. · Coordinate material procurement, supplier relationships, and quality control efforts. · Analyze data and generate reports to support informed decision-making. · Gradually take on more leadership responsibilities with the potential to transition into a management role. Requirements: · Strong problem-solving skills and the ability to work independently. · Experience working on multiple projects simultaneously. · Excellent communication, interpersonal, and leadership skills. · Ability to learn quickly and adapt to evolving responsibilities. · Strong organizational and time-management skills. Education and Experience: · Bachelor's degree in Engineering, Construction Management, or a related field. · 2-3 years of experience in construction management. · Experience with advanced reporting and analytics tools (Power BI, SQL, Python, etc.) is a plus. · Previous leadership or mentorship experience is a plus. Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

The Senior Project Engineer is responsible for planning, developing, coordinating, and managing engineering activities for multiple construction projects. This role provides technical expertise and project oversight, ensuring that all administrative and engineering aspects align with project goals. Working closely with internal teams and external partners, the Senior Project Engineer plays a critical role in optimizing processes, ensuring regulatory compliance, and maintaining alignment between project plans and on-site execution. This position supports multiple concurrent projects while gradually taking on leadership responsibilities, with the potential for career advancement into a management role. Essential Duties and Responsibilities: · Participate in and support up to 10 concurrent projects. · Collaborate with internal teams and external partners to ensure project success. · Provide regular updates to clients on project status, timelines, and key developments. · Develop, implement, and optimize processes to improve efficiency and productivity. · Lead and mentor team members, facilitating knowledge transfer and professional growth. · Work closely with field employees to ensure alignment between project plans and on-site execution. · Monitor the work of the engineering firm, providing direction and ensuring alignment with project goals and timelines. · Assist in budgeting, scheduling, and resource allocation. · Ensure compliance with industry regulations, company policies, and safety standards. · Coordinate material procurement, supplier relationships, and quality control efforts. · Analyze data and generate reports to support informed decision-making. · Gradually take on more leadership responsibilities with the potential to transition into a management role. Requirements: · Strong problem-solving skills and the ability to work independently. · Experience working on multiple projects simultaneously. · Excellent communication, interpersonal, and leadership skills. · Ability to learn quickly and adapt to evolving responsibilities. · Strong organizational and time-management skills. Education and Experience: · Bachelor's degree in Engineering, Construction Management, or a related field. · 2-3 years of experience in construction management. · Experience with advanced reporting and analytics tools (Power BI, SQL, Python, etc.) is a plus. · Previous leadership or mentorship experience is a plus. Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process.

Responsibilities and Measurement Criteria with Time investment Needed on Each: (This will describe the overall core responsibilities of the role, decision making responsibilities etc.) Design and development of UPS subsystems/components in compliance with specifications, EMC/EMI requirements, and applicable standards. PCB design. Detailed analysis of UPS electronic subsystems/components, focusing on performance evaluation, design optimization, component selection and sizing, and control strategy. Collaboration in an interdisciplinary engineering environment (with embedded, test, and mechanical engineers) to define requirements, discuss trade-offs, participate in design verification, and ensure successful integration of single-phase UPS designs. Continuous improvement of existing designs, evaluation of application issues, and resolution of those issues in the design of new products. Evaluation of new technologies to enhance and implement them in new R&D systems and processes. Adherence to agreed-upon project timelines. Preparation of relevant technical reports. Qualifications: Required/ Minimum Qualifications: Master's degree or higher in Electrical Engineering with a focus on power electronics. Proficiency in medium-to-low power circuit topologies, principles of power electronic converters, and semiconductor devices. Additional / Preferred Qualifications: - Hands-on experience with PCB design and layout. Knowledge of electronic design practices for EMC compliance. Strong analytical skills combined with excellent problem-solving abilities and interpersonal communication. Experience in UPS and power module development is highly desirable. Physical & Environmental Requirements: - (To be used majorly for manufacturing jobs.) None Time Travel Needed: 10% OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ...@vertivco.com . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1

*About Us* At Apex Engineering and Design Solutions, we provide innovative construction and engineering solutions for complex projects nationwide. Our team specializes in federal and private-sector projects, delivering excellence in design, coordination, and construction. We are seeking a skilled Structural Engineer with a Professional Engineer (PE) license to join our growing team. *Job Overview* We are seeking a detail-oriented Structural Engineer (PE) to join our dynamic team. The ideal candidate will be responsible for leading and executing structural design projects from concept through completion while ensuring compliance with safety standards and regulations. The ideal candidate is experienced in producing and stamping shop drawings, coordinating with stakeholders, and ensuring compliance with applicable codes and standards. Federal project experience is strongly preferred. *Responsibilities* * Perform structural analysis and design for a variety of projects, with an emphasis on federal facilities. * Maintain a high level of quality control on deliverables. * Prepare, review, and stamp structural drawings, calculations, and specifications. * Oversee preparation of shop drawings, ensuring accuracy, completeness, and compliance with project requirements. * Collaborate with architects, project managers, and other engineering disciplines to develop integrated project solutions. * Conduct field investigations, site visits, and inspections as needed. * Ensure all work meets federal, state, and local building codes and applicable design standards. *Qualifications* * Active PE license in Structural or Civil Engineering (required) * Detail-oriented with strong organizational and problem-solving skills. * Bachelor's degree in Civil or Structural Engineering (Master's preferred). * Minimum 5+ years of structural engineering experience (federal project experience strongly preferred). * Proven experience producing and stamping shop drawings and structural design packages. * Proficiency with structural design software (e.g., RISA, SAP2000, STAAD, RAM, or similar). * Strong knowledge of IBC, ACI, AISC, and other applicable codes/standards. * Excellent communication skills and ability to coordinate across multiple disciplines. *Preferred Experience* * Prior engineering work on federal government projects (VA, DoD, GSA, Corps of Engineers, etc.) * Familiarity with federal project submittal processes, quality control standards, and compliance requirements. * Experience working in a design-build environment Job Type: Full-time Pay: $90,000.00 - $135,000.00 per year Benefits: * Gym membership * Paid time off * Wellness program Education: * Bachelor's (Required) License/Certification: * Professional Engineer (Required) Ability to Commute: * Daphne, AL 36526 (Required) Work Location: In person

Join our Family-owned and operated, Made-in-the-USA crew in Danbury, Connecticut! Our Engineering Department is hiring. Come aboard where family, patriotism, and integrity are valued and celebrated. Full Job Description Mid-level to Senior Engineering Project Manager position for a highly motivated engineer willing to “hit the ground running”. Preferred Utilities is a manufacturer and supplier of combustion and fuel oil systems with headquarters in Danbury CT. With over a hundred years as a family run business we offer made in the USA products in all areas of combustion and fuel oil systems. A project manager owns the profitability and the schedule of projects. We are looking for an individual with excellent communication skills, that is motivated and proactive. The ideal candidate will be capable of working with a multidisciplinary team of engineers including electrical, mechanical, systems, programing, and field service engineers. You will have complete ownership of a project from a sales concept to a finished design. This includes managing project budgets, submittals, fabrication, and schedules. What You Will Be Doing Design Development from Proposal to Shipping and Start-up Communicate with all customers and provide status updates on projects. Manage project schedule, budget, and profitability. Work with Engineering team of all disciplines to execute projects from sales to manufacturing and field startup. Interpret and adhere to applicable codes and standards. Interpret electrical drawings, mechanical drawings, and construction drawings. Provide some tech support Provide systems startup and commissioning assistance Use Preferred Utilities internal systems for project management. Slight travel for meetings and site visits 10% Basic Requirements Minimum of a BS in Electrical Engineering, Mechanical Engineering, Systems Engineering or similar. Experience with Industrial Combustion systems is preferred. Familiarity with construction drawings and specifications. Excellent communication skills. Be familiar with DraftSight, AutoCAD or similar. Project management and outstanding customer skills. Self-starting! Driven! One that takes PRIDE in his or her work! Benefits: 401(k) 401(k) matching Health insurance Health savings account with matching plan Vision insurance Dental insurance Life insurance Paid time off Quarterly bonus potential

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding ExpertTM for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Salary Full-Time Function: Engineering Req ID: 27246 Summary Lincoln Electric is seeking a highly skilled Project Manager to support our Red Viking subsidiary based in Plymouth, MI. This role is responsible for leading complex, high-visibility projects that require significant resources, cross-functional collaboration, and seamless integration across teams. The Project Manager will drive initiatives from concept through final implementation, ensuring quality, budget, and schedule adherence while maintaining strong stakeholder alignment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more. Key Responsibilities Lead projects through the full lifecycle: initiation, planning, execution, monitoring, control, and closure. Define project scope, objectives, deliverables, and success criteria while aligning team members to roles and responsibilities. Develop detailed project schedules, allocate resources, and manage risks to ensure timely and cost-effective completion. Coordinate cross-functional efforts with engineering, manufacturing, procurement, testing, quality, distributors, vendors, and end users. Ensure strict compliance with quality standards; review and approve final project deliverables. Provide regular updates to executive leadership and business unit leaders on project progress, risks, and outcomes. Manage and maintain financial tracking tools including Gross Margin, Operating Profit, Backlog, SG&A, and other key financials. Utilize advanced Excel skills to create and troubleshoot formulas, build reports, and support executive-level reporting. Leverage ERP systems for project tracking, reporting, and ensuring data integrity across business functions. Lead and mentor a team of project engineers, staff engineers, and manufacturing professionals to achieve technical and operational goals. Prepare clear documentation, presentations, and reports for both internal and external stakeholders Required Experience & Education Education: Bachelor's degree in Engineering, Technical Discipline, or Business Administration (with strong technical design and execution background). Experience: 7-10+ years of project management experience in a manufacturing environment. Proven background in advanced capital equipment design, build, and installation (scheduling, procurement, manufacturing, testing, and quality). PMP certification strongly preferred. Project Leadership: Demonstrated success managing scope, budgets, schedules, personnel, and materials within complex organizations. Technical Knowledge: ERP systems experience for project management and reporting. Proficiency with Excel (advanced formulas, financial tracking, reporting). Familiarity with ISO 9001, ISO 14001, ISO 17025, or equivalent standards. Soft Skills: Strong leadership, influence, and negotiation abilities. Excellent written, verbal, and presentation communication skills. High attention to detail and documentation accuracy. Other Requirements: Supervisory experience managing technical professionals. This person will work very closely with a team of project engineers, staff engineers, and manufacturing professionals on a daily basis. Willingness to travel up to 20%. U.S. Citizen or Permanent Resident (ITAR compliance required). Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Dutchland, LLC designs, manufactures and constructs precast, post-tensioned concrete tanks for water, wastewater and renewable energy applications. Our team is growing and we're seeking a structural engineer (all experience levels, Spring 2026 grads welcome to apply). This is a great opportunity to make a difference in the water and wastewater industry. Position Responsibilities: Perform structural analysis and design of precast, post-tensioned concrete tanks in compliance with appropriate design codes and Dutchland standard practices Oversee the preparation of Erection and Production drawings for precast, post-tensioned concrete tanks Coordinate with the Project Management, Production and Construction departments to produce and install tanks within established budgets and schedules Contribute to efforts within the Engineering Department to continuously improve quality and efficiency of structural designs Contribute to efforts in the Engineering and Drafting Department to continuously improve efficiency of workflow Travel to job sites to inspect the work, as needed Perform stripping and handling calculations for precast concrete panels Interpret Contract Documents for environmental engineering tank projects Diligently work to obtain proficiency in analysis and design of all types of tanks produced by Dutchland Qualifications: B.S. in Civil Engineering, or equivalent Engineer-in-Training certificate PE license is a plus, but not required Reinforced concrete design Prior precast concrete and/or concrete tank design experience is desirable, but not required Foundation design Experience with 3D CAD modeling software desired, but not a requirement Technical writing Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people in the classification and are not intended to be construed as an exhaustive list of all job responsibilities, duties, and skills required of personnel so classified.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding ExpertTM for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Salary Full-Time Function: Engineering Pay Range: ($93,254.24 - $125,000.00) Target Bonus: 10.0% Req ID: 27529 Summary Fori Automation, a Lincoln Electric Company, is seeking a highly skilled Project Manager for our Shelby Township, MI location. Fori Automation specializes in designing, building, and integrating custom automated systems for material handling, assembly, testing, and welding, with a strong focus on engineering and manufacturing solutions for the automotive, aerospace, and defense industries. The Project Manager will be responsible for managing all engineering, design, procurement, manufacturing, and integration phases of custom automation projects. This includes contract reviews, design and engineering reviews, procurement, manufacturing, internal and customer buyoffs, as well as shipping, installation, production support, and training. In addition to competitive pay, Lincoln Electric offers an annual bonus plan, tuition reimbursement, medical/dental/vision, 401(k) with company match, paid time off and many more outstanding benefits! What You Will Do Project Execution & Engineering Leadership: Manage engineering and manufacturing teams throughout the project lifecycle, ensuring the integration of complex systems for our clients. Lead design reviews, procurement processes, and oversee the execution of manufacturing workflows. Budget and Financial Management: Monitor project financial performance, including maintaining performance to budget, cash flow management, and implementing change control processes to minimize cost overruns and maximize project profitability. Manufacturing & Quality Control Oversight: Collaborate closely with internal teams and suppliers to ensure the manufacturing and assembly of systems meet high-quality standards, manufacturing specifications, and customer requirements. Resolve engineering, quality, and production issues in a timely manner to maintain on-time delivery. On-Time Delivery & Schedule Management: Oversee detailed project timelines, ensuring all deliverables are met within established schedules. Adjust timelines and work plans based on manufacturing or engineering constraints, ensuring continuous alignment with customer requirements. Team Leadership & Problem Resolution: Lead cross-functional technical teams to resolve engineering and manufacturing issues, ensuring that technical solutions meet performance and quality standards. Foster a collaborative environment while managing competing priorities across multiple projects. Reporting & Communication: Provide weekly status updates and detailed project reporting to senior management through tools like spreadsheets, project timing matrices, and internal issue tracking. Communicate technical details, project risks, and resolutions effectively to both internal teams and customers. Travel & Customer Interaction: Travel may be required (~10%) for customer kickoffs, site reviews, critical issue meetings, and final acceptance. Support customer engagement by providing technical expertise, troubleshooting, and guiding them through the commissioning process. What We're Looking For Minimum of 10+ years of project management experience in an engineering or manufacturing environment, preferably in the automated systems, robotics, or advanced manufacturing industries. AGV experience highly desirable. PMP certification is preferred, but not essential. Strong communication, leadership, and organizational skills, with a proven ability to manage cross-functional engineering teams and manufacturing processes. Proficiency in project management software, including Microsoft Project, Excel, Word, and PowerPoint. Technical Expertise: Knowledge and hands-on experience with assembly systems, tooling equipment, automated systems integration, and manufacturing processes. Demonstrated ability to create, execute, and adjust complex project work plans while managing scope, quality, and risks in a fast-paced engineering environment. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Project Manager II Ready to lead projects that make a lasting impact? At Stevens Industries, we're looking for a Project Manager- Education and Specialty Markets to take ownership of Education and Miscellaneous Market projects from kickoff through installation. This role is perfect for a confident communicator and problem-solver who thrives in fast-paced, construction-related environments. What You'll Do • Manage all phases of projects-planning, scheduling, scope confirmation, change management, and closeout. • Serve as the primary point of contact for customers, architects, and contractors. • Coordinate with Sales, Engineering, and Operations to ensure alignment and timely delivery. • Oversee job site readiness, installation logistics, and site progress. • Travel to customer sites for walkthroughs, meetings, and hands-on support. • Monitor project health-scope, timeline, budget, and customer satisfaction. • Identify risks early and lead issue resolution across teams. • Manage financials including freight, labor, and installation costs. Requirements What We're Looking For • Bachelor's degree (Business, Engineering, Construction Management preferred). • 5+ years of project management experience in construction or architectural products. • Proven ability to manage high-value projects from start to finish. • Strong knowledge of construction environments and contract language. • Excellent communication and negotiation skills. • Proficiency in Microsoft Office, PROCORE, and ERP experience preferred. • Ability to read technical drawings and manage competing priorities. FSLA: Exempt BENEFITS: Highly competitive salary and bonus structure On-Demand Pay - Access your earned pay prior to payday 100% Company-Paid Life Insurance and Disability Insurance Affordable Employee Health Insurance Competitive Paid Time Off Plan plus 9 Paid Holidays 200% Company 401(K) Match Annual Profit-Sharing Bonuses Company Stock Options Dental & Vision Insurance Health Savings Account with Company match On-site Childcare for Employees' Children and Grandchildren Educational Assistance Plan Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $65,000-$95,000

Leeds Professional Resources is working with a growing company in Charlotte, NC that is looking for a Project Manager. Responsible for reviewing and maintaining cost estimates of material, sub-contractors, purchased equipment, and other project-related activities. Monthly job status reporting, productivity tracking, and budget updates. Coordinate project schedule. Prepare and issues purchase orders for subcontractors. Approve invoices. Provide complete closeout documentation and warranty coverage. Must have 5 years of project management experience Hospital project management experience is a huge plus

Job Title: Project Manager We are seeking a skilled HVAC Commercial Project Manager to oversee our projects in Charlotte, NC. The ideal candidate will manage all aspects of HVAC system installations, ensuring projects are completed on time, within budget, and to the client's satisfaction. Responsibilities: Manage multiple HVAC projects simultaneously from initiation to closeout. Coordinate with clients, subcontractors, and internal teams to ensure project milestones are met. Develop project scopes, schedules, and budgets in collaboration with stakeholders. Procure materials, equipment, and services necessary for project execution. Conduct regular site visits to monitor progress, resolve issues, and ensure compliance with safety standards. Prepare and present progress reports and project updates to senior management and clients. Manage project financials, including budgeting, forecasting, and cost control measures. Ensure all projects adhere to contractual requirements and regulatory standards. Foster positive relationships with clients, subcontractors, and team members to promote repeat business and referrals. Stay updated on industry trends, best practices, and technologies related to HVAC systems. Qualifications: Bachelor's degree in Mechanical Engineering, Construction Management, or related field preferred. Proven experience as an HVAC Project Manager in commercial construction projects. Strong knowledge of HVAC systems, equipment, and installation practices. Excellent leadership, communication, and negotiation skills. Ability to manage multiple projects and stakeholders concurrently. Proficiency in project management software and Microsoft Office Suite. PMP certification or equivalent is a plus.

We are seeking a detail-oriented and motivated CAD Engineering Technician Intern to join our Millwork Solutions Engineering team. This internship offers hands-on experience in drafting and modeling custom millwork components using industry-standard tools like Microvellum and Autodesk Inventor. You'll work closely with experienced engineers and designers to support the creation of precise 3D CAD models and technical documentation for production. KEY RESPONSIBILITIES: Create and modify detailed 3D CAD models and 2D drawings using Microvellum and Inventor. Assist in the development of custom millwork designs and engineering solutions. Interpret architectural and engineering drawings to produce accurate shop drawings. Collaborate with engineers and production teams to ensure design intent and manufacturability. Maintain drawing standards and file organization within the engineering database. Support the documentation of design processes and best practices. Requirements Currently pursuing or recently completed a degree or certification in Drafting, CAD Technology, Mechanical Engineering Technology, or a related field. Proficiency in Autodesk Inventor and familiarity with Microvellum or similar woodworking/CAD software. Strong attention to detail and ability to follow technical specifications. Basic understanding of millwork or cabinetry manufacturing is a plus. Excellent communication and organizational skills. BENEFITS: • 1 hour of PTO per 40 hours worked • On-Demand Pay - Access your earned pay prior to payday • Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Recognized as one of the fastest growing furniture and cabinet manufacturers in the United States, Stevens Industries, Inc. is a world-class manufacturer of wood and laminated products. We're dedicated to innovation, technological advancement, and beauty in functionality. Founded in 1956 and 100% employee owned, we credit our achievements to a focused path and our talented, passionate employee owners. Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Salary Description $16-$18 per hour

Construction firm specializing in interior renovations seeks a Project Manager with proven experience in rebuilding and remodel projects (no ground-up required). Focus on high-end residential and commercial interiors, insurance restoration, and tenant improvements. Key Responsibilities: Manage interior rebuild/renovation projects from scope development through punch-list and handover. Coordinate subcontractors, material procurement, and scheduling for demolition, framing, finishes, MEP, and FF&E. Prepare and track project budgets, change orders, and owner billing. Ensure quality control, safety compliance, and code adherence. Serve as primary client contact for progress updates and issue resolution. Qualifications: 5+ years project management experience in interior rebuilding/renovation (insurance restoration, high-end residential, or commercial TI preferred). Strong knowledge of interior finishes, MEP coordination, and permitting for occupied spaces. Proficiency in Procore, Buildertrend, or similar project management software. Excellent client communication and problem-solving skills.

Job Title: Commercial Construction Project Manager Company Overview: We are a leading construction firm specializing in commercial projects across various sectors including healthcare, industrial, educational, religious, hotels, and multifamily. With a strong presence in Charleston, South Carolina, we pride ourselves on delivering high-quality projects that exceed client expectations. Position Overview: We are seeking an experienced Commercial Construction Project Manager with a proven track record in managing and overseeing projects within the healthcare, industrial, educational, religious, hotels, and multifamily sectors. The ideal candidate will have at least 3 years of construction leadership experience, demonstrating a deep understanding of project management principles, construction methodologies, and client relationship management. Key Responsibilities: Manage and oversee commercial construction projects from inception to completion, ensuring adherence to budget, schedule, and quality standards. Coordinate and collaborate with architects, engineers, subcontractors, and suppliers to ensure project success. Develop and maintain project schedules, budgets, and cost reports. Implement and enforce safety protocols and procedures on-site. Monitor and control project progress and performance against established benchmarks. Communicate effectively with clients to address concerns, negotiate contracts, and ensure satisfaction throughout the project lifecycle. Provide leadership and mentorship to project teams, fostering a collaborative and productive work environment. Qualifications: Bachelor's degree in Construction Management, Civil Engineering, Architecture, or related field. Minimum of 3 years of experience in a project management role within commercial construction, with a focus on healthcare, industrial, educational, religious, hotels, or multifamily projects. Proven ability to manage multiple projects simultaneously. Strong knowledge of construction processes, building codes, and regulations. Excellent communication, negotiation, and problem-solving skills. Proficiency in project management software and tools (e.g., Procore, Primavera, MS Project). Benefits: Competitive salary commensurate with experience. Comprehensive benefits package including health insurance, retirement plans, and paid time off. Opportunities for career growth and professional development. Application Process: Interested candidates are encouraged to submit a resume highlighting relevant experience and project achievements

*Job Title :* Product Engineer *Department: *20-Engineering *Reports To:* Design Engineering Manager *FLSA Status:* Exempt *Days: *7am-3:30pm The Product Engineer serves as a key technical resource supporting both new product development and existing product lines. This role requires strong attention to detail in design, documentation, and execution to ensure products meet performance, cost, and reliability goals throughout their lifecycle. The ideal candidate is organized, proactive, and able to manage multiple projects thoughtfully, taking ownership and driving them to completion through sound engineering judgment and collaboration. *Essential Duties and Responsibilities: * · Provide expert applications and technical support to internal and external customers regarding filtration performance, compatibility, installation, and troubleshooting. · Translate customer application needs (flow rate, pressure, contaminant type, efficiency, compatibility) into clear engineering specifications. · Create and maintain 3D models, 2D drawings, and supporting documentation in accordance with company standards and industry best practices. · Conceptualize, design, prototype, and test filtration products including filter elements, housings, vessels, cartridges, and system components. · Plan and execute APQP activities for new products, including DFMEA, design verification, prototype evaluations, and launch readiness coordination with Manufacturing, Quality, and Suppliers. · Generate and maintain Bills of Material (BOMs), Routings, Items, and SKU data within the ERP system (Microsoft Business Central). · Lead design and development efforts for new and existing products, balancing function, manufacturability, cost, and quality requirements. · Conduct engineering analysis related to pressure drop, flow dynamics, structural integrity, thermal effects, and contaminant loading for filtration designs. · Create and maintain technical documentation including service bulletins, material specifications, product data sheets, drawings, and compliance documentation. · Manage Engineering Change Requests (ECRs), deviations, and product updates through the full documentation and approval process. · Lead design reviews in product development programs and present recommendations based on test data, customer requirements, and regulatory considerations. · Drive continuous improvement in product design, performance, and cost efficiency. · Work independently to plan, prioritize, and execute multiple concurrent projects, maintaining progress with support from leadership as needed. *Supervisory Responsibilities: * · None *Travel Required: * · Minimal - Potential when supporting operations of alternate production locations. *Education and Experience: * · Bachelor's degree in mechanical, Industrial, or related Engineering discipline. · 3+ years of experience in product design, manufacturing engineering, or a related technical role preferred. · Proficiency with CAD software (e.g., SOLIDWORKS) and an understanding of GD&T principles. · Experience managing projects through design, prototype, validation, and production release stages. · Strong understanding of manufacturability, materials, and assembly processes. · Experience with metal component manufacturing processes, including castings, stampings, and machining, with an understanding of their design considerations and tolerances. · Experience working within an ERP environment (Microsoft Business Central) to manage product data and revisions. · Excellent organizational skills and the ability to manage multiple priorities independently. · Demonstrated problem-solving, communication, and teamwork skills. · Motivated and able to work independently while using good judgement and a willingness to make decisions. *Physical Requirements * · May require standing, walking, bending, reaching, and lifting up to 25 lbs. and 50 lbs. occasionally. · Work may occur in both office and manufacturing environments with exposure to shop conditions. · Specific vision abilities required include close vision, distance vision, color vision, peripheral vision, depth perception., and ability to adjust focus. Job Type: Full-time Pay: $70,000.00 - $85,000.00 per year Benefits: * 401(k) * Dental insurance * Health insurance * Paid time off * Vision insurance People with a criminal record are encouraged to apply Work Location: In person

Multi-Family Construction/Development Group currently seeking a Project Manager. This position will report to the Vice President of Construction. Responsibilities include, but are not limited to: Partner with the Construction Executive in interacting with subcontractors Partner with the Construction Executive in the drafting of client proposals Partner with the Construction Executive on contract administration and management Work with preconstruction, estimating and scheduling on project estimate and schedule Provide direction to the project team to complete the projects safe and on time Perform on-site Project Manager duties on small scope projects Qualifications include: BS in a Construction related field preferred. Multi-Family Construction required. Podium, Wrap, Construction preferred. Strong working knowledge of Excel and Word Strong prioritization and organizational skills; detail-oriented Excellent verbal and written communication skills

Are you a designer who thinks like an engineer-and builds like a visionary? We're looking for an Engineering Product Designer to help us shape the future of furniture and cabinetry. You'll lead the charge in designing products that are not only functional and beautiful, but also manufacturable, reliable, and cost-effective. This is a hands-on, full-time role where your ideas move from sketch to shop floor. You'll collaborate across departments, listen to customer needs, and turn insights into products that stand out in the market. What You'll Do Design and develop innovative furniture and cabinetry products from concept to production Collaborate with engineering, marketing, sales, and manufacturing to bring ideas to life Conduct user research and testing to validate product features and performance Create detailed CAD models, prototypes, and product documentation Apply engineering principles to ensure safety, reliability, and manufacturability Balance aesthetics with function, cost, and production feasibility Requirements Bachelor's degree in engineering, industrial design, or equivalent experience 5+ years designing furniture or cabinetry products from concept to launch Proficiency in CAD tools like SolidWorks, Inventor, or SketchUp Deep understanding of materials, manufacturing processes, and safety standards Strong collaboration skills across technical and creative teams A sharp eye for detail, a problem-solving mindset, and a passion for design Your Benefits Include: Highly competitive salary and bonus structure On-Demand Pay - Access your earned pay prior to payday 100% Company-Paid Life Insurance and Disability Insurance Affordable Employee Health Insurance Competitive Paid Time Off Plan plus 9 Paid Holidays 200% Company 401(K) Match Annual Profit-Sharing Bonuses Company Stock Options Dental & Vision Insurance Health Savings Account with Company match On-site Childcare for Employees' Children and Grandchildren Educational Assistance Plan Additional Employee Perks such as fitness club reimbursement, retail discounts, company apparel, special employee events and meals, and more Stevens Industries, Inc. and Tot Mate Central is committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. The pay range provided represents the expected compensation for this position. Actual pay will be determined based on factors such as experience, skills, and qualifications, while maintaining fairness with internal pay structures. We ensure compliance with all applicable wage and hour laws, including those related to minimum pay requirements. Salary Description $70,000 to $85,000