Programming Engineer jobs at Huntsman

PROCESS & TOOLING ENGINEER - INJECTION MOLDING If your skills, experience, and qualifications match those in this job overview, do not delay your application. Dynomax is a full-service injection molder in the aerospace and defense industries. We perform all mold building, injection molding, automation, maintenance and repair in-house, which enables us to control the entire process for exceptional quality assurance. We have an opportunity available for a Process & Tooling Engineer, who will act as liaison between Mold Design, Tool Room, and Production Departments. Process & Tooling Engineer Responsibilities: Develop and modify process parameters for injection molding of electrical components Coordinate activities with tooling engineers, toolroom staff, and production technicians Perform root cause analysis and resolution of non-comformances where engineering support is required Establish and document Methods of Manufacturing (MoM) incorporating key notes and details needed for repeat production, including set up and processing parameters Ensurethat engineering documentation is appropriately maintained and controlled Sample new molds to produce parts for engineering validation Troubleshoot critical jobs throughout the production run Provide and implement ideas to improve the efficiency of the Molding Department Record and update all processes after ensuring all key areas are correct, including mold protection Experience with CAD Software (Solidworks preferred) Process & Tooling Engineer Requirements: Bachelors degree in Engineering required; Plastics Engineering degree preferred Minimum of 10years experience in production support within an injection molding environment Knowledge of mold assembly and its effects on processing capabilities Firm understanding of the scientific injection molding process and tool design Advanced level of mold setting and injection mold processing knowledge Knowledge of raw materials and their processing characteristics Excellent data collection and communication skills Process & Tooling Engineer Preferred Experience: Master Molder Certified Epicor ERP experience Experience with engineering grade materials such as Liquid Crystal Polymers (LCP), filled and unfilled Polyphenylene Sulfide (PPS), Ultem, fluorosilicone rubber, PFA, thermoset resinssuch as Bakelite 1908B-1 (Epiall) and diallyl phthalate (DAP) Benefits Include: Medical, dental, and vision insurance Company-paid life insurance 401(k) Plan with a generous Company match Paid holidays, vacation days, PTO days Optional FSA and Identity Theft Protection Optional Short Term Disability, Accident, Critical Illness, and Supplemental Life Insurance Discretionary annual bonus Manufacture a great career with Dynomax! xevrcyc Dynomax provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. PIca42cf946aba-38

Job Posting Start Date 12-03-2025 Job Posting End DateFlex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary The Principal Applications Engineer will be based in San Jose, CA reporting to the Director, Global Field Application Engineering. The Applications Engineer will be accountable for providing technical guidance and design-in help to customers on a post-sales basis to enable delivery of design, fabrication, and assembly goals, per customers' expectations. What a Typical Day Looks Like: Uses technical knowledge of products and associated development tools to assist customers on complex issues. Conducts complex qualification/verification testing onsite (local labs) and coordinates closely with design engineering to solve any issues and deliver results on time. The onsite part can be 50-75% of the time (the rest of the time would be remote/work from home). Develops and maintains close relationships to work very closely with internal engineering and business development teams. Build close relationships with the customer technical teams to work and collaborate closely with them. Provides technical expertise during product development by defining/conveying customer product needs and translating these needs into new product recommendations and specifications. Reviews customer requirements, identifies and communicates potential issues and provides recommendations that will meet both the capabilities Flex and the specifications of the customer. Creates clarity: identifies and clearly communicates existing and potential design issues both internally and externally. Coordinates product integration efforts between component suppliers, Flex, and the customer. Develops and presents technical seminars for customers and Field Application Engineers to promote employers' manufacturing capabilities, services, available technologies, manufacturing process and quality. Provides best in class, complex, technical assistance by answering and closing all customer and program management technical questions related to manufacturing capabilities including design, fabrication, and assembly abilities. Defines initial project/product scope and prepares project plans to meet customers' expectations. Prepares detailed project plans by documenting customers' requirements and incorporating design and manufacturing capabilities to meet customers' expectations. Prepares and maintains required documentation. May be required to sit at customer site (locally) for prolonged periods of time. The Experience We're Looking to Add to Our Team: Bachelor's degree in electrical engineering (master's preferred). 8+ years of design and/or applications engineering experience in the power conversion area (dc-dc conversion preferred). Demonstrates detailed expertise in complex functional/technical area with a deep understanding of power electronics and power conversion considerations. Is extremely comfortable in the lab environment and can expertly conduct verification/qualification testing for extended periods of time at the (local) lab/s. Provides key technical support to mid-large customers promptly. Executes and provides input to functional strategic plans and objectives for the group/site. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$150,000.00 USD - $206,300.00 USD AnnualJob CategoryDesign, Process & Technology Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Submittal Design Engineer location to be remote but preferably Fontana, CA. Reporting to the Technical Sales Manager - Modular the Submittal Design Engineer role involves creating Mechanical Layout designs for Pre-fabrication modular solutions whilst supporting pre-sale documentation and Technical submittals, this role ensures drawings issued for Submittal are controlled, accurate and easy to follow. What a typical day looks like: Provide assistance to Technical Sales Manager and PMDC team to achieve strong pre-sale design submittals and technical submittals. Liaising with Sales team and the Electrical and Mechanical Design Managers in Fontana, CA and Dallas, TX on the development of the library of standard drawings and technical submittals for industry standardization. Ensuring drawings issued for Submittal are aligned, accurate and easy to follow against customer requirements, detailing the expectation from Technical Sales. Collaborating with sales, marketing and product teams to develop product brochures and sales literature. Reporting directly to the Technical Sales Manager. The experience we're looking to add to our team: Preferred qualifications include an Electrical/Mechanical Engineer degree or equivalent experience. Proficient in 2D & 3D design software, specifically AutoCAD and SolidWorks. Knowledgeable about electrical engineering concepts and electrical power distribution products. Highly detail-oriented, enthusiastic, and conscientious in work habits. Able to meet deadlines in a fast-paced, pressurized environment with demonstrated flexibility. Strong interpersonal, communication, writing, and presentation skills. Confidently manages multiple objectives under pressure while maintaining organization. Exhibits a strong work ethic with a commitment to confidentiality and a practical approach to tasks, whether collaborating in a team or working independently. JJ06 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$74,800.00 USD - $102,900.00 USD AnnualJob CategoryDesign, Process & Technology Engineering Is Sponsorship Available? No

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Commercial Aircraft is looking for an Aircraft Maintenance Programs Engineer (Contract) to join our Engineering department based in Mobile, AL. The Aircraft Maintenance Programs Engineer works within a group of maintenance programs engineers on assigned cabin and cargo, structures, and zonal tasks with the purpose to develop, challenge, identify, and select necessary Instructions for Continued Airworthiness, airworthiness limitations, and maintenance requirements for Airbus commercial programs. The Maintenance Programs Engineer supports America's regional customer airlines and also participates in Maintenance Review Board and Type Certification exercises. Meet the Team: Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you're interested in designing, creating, and testing the present and future of Airbus products across the globe, join our mission to connect the world. Your Working Environment: The Engineering Center in Mobile, Alabama houses hundreds of Airbus engineers who assist in the design and development of Airbus commercial aircraft cabins, including aftermarket upgrades, reconfigurations and services of all product types across the globe. Your Challenges: * Develop the maintenance program for Airbus aircraft through common industry standards and the associated company processes and engineering tools * Represent Airbus in operator meetings, technical conferences, international industry conferences and working groups * Provide high-quality responses and assist with regular airline queries within a given target date * Support Customer Airlines maintenance specific needs as they arise in the Americas region i.e. maintenance planning, optimizations, etc. * Collaborate with other Airbus aircraft maintenance teams/departments to support the Customer Airlines and maintenance engineering activities * Review aircraft modifications, vendor manuals, and industry directives; understanding the impacts to the specific aircraft systems and structures within the frame of maintenance programs engineering * Support operator maintenance deviation requests via MSG-3 Analysis, in-service data, and engineering judgement * Ensure transfer of in-service experience to design offices ensuring continuous improvement of in-service fleets and for new aircraft programs * Improve the product reliability, maturity, and residual value of Airbus aircraft * Keep a close relationship with Airworthiness Authorities and the maintenance engineering departments at the other Airbus sites * Provide maintenance engineering advisement to other Customer Services divisions, as well as to other Airbus directorates (sales, marketing, certification) Your Boarding Pass: * Bachelor's Degree in Engineering. (Mechanical, Aerospace, Electrical or Civil Engineering) * ~1+ year experience in an engineering classification. * 10% travel (Domestic and International) involved * US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license), Authorized to work in the US. * Proficiency with G Suite. * Team oriented - ability to work as a member of a team with other departments locally and internationally. * Ability to read/write/speak English. * Ability to communicate effectively (written and verbal) with both internal and external customers in a professional manner. * Demonstrates a high level of listening and speaking capabilities with all levels of management, internal and external. * Demonstrates a refined approach to communication that resolves problems, facilitates consensus, and focuses on objectives. * Displays model writing skills for others to emulate * Demonstrates simple and effective ways to communicate. * Able to represent Engineering in presentations at Airbus related activities. * Basic technical knowledge on overall Service Bulletin process Preferred: * Master's Degree in an Engineering discipline * Minor in Computer Science * Experience in the aircraft customer service field (Airline experience, MRO experience, Maintenance experience, etc.) * Airbus experience with various Airbus programs (A380, A350, LR, SA, WB) * Data analysis Physical Requirements: * Onsite or remote: 100% onsite. * Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings - part of daily job * Hearing: able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms - part of daily job * Speaking: able to speak in conversations and meetings, deliver information and participate in communications.- part of daily job * Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment - part of daily job * Carrying: able to carry documents, drawings, electronic equipment up to 30lbs/14kgs. - part of daily job * Lifting: able to lift documents, drawings, electronic equipment up to 30lbs/14kgs. - part of daily job * Sitting: able to sit for long periods of time in meetings, working on the computer. - part of daily job * Standing: able to stand for discussions in offices - part of daily job * Travel: able to travel independently and at short notice. - as required based on job needs * Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office areas including uneven surfaces. - part of daily job This role requires US Person status under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license) This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: Agency / Temporary Experience Level: Professional Remote Type: On-site Job Family: Structure Design & Integration * ----- * ----- Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. This assignment description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Job Posting Start Date 12-03-2025 Job Posting End Date 02-04-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary We are seeking a skilled and motivated Product Engineer specializing in PCB Design management and manufacturing to join our dynamic team. This position will be onsite at our Austin, TX facility, reporting to the Operations Engineering Manager. Here is a glimpse of what you'll do: Analyze data to determine root cause and implement corrective actions surrounding product issues. Must function as part of a cross functional team to support assembly operations. Prepare or direct preparation of product layout and design by using detailed drawings (i.e., visuals, Manufacturing Process Instructions (MPI)). Directs and coordinates manufacturing or building of prototype product or systems. Analyzes inspection and test data and reports to determine if design meets functional and performance specifications. Confers with other engineering personnel and prepares design modifications as required. Evaluates inspection or test results for possible improvements of existing builds. Uses computer assisted engineering and design software and equipment to perform engineering and design tasks. Process Engineering Change Order (ECO) and deviations Coordinates engineering activities for the Customer Focus Team (CFT) and coordinates with the customer to resolve production problems. Develops and updates documentation to establish production methodology and requirements. Identify and coordinate the construction of the tooling and fixturing required for product assembly, inspection and product movement. Here is some of what you'll need (required): 5-8 years in manufacturing support role and ECO management (post internship) Bachelor's degree in Engineer (Mechanical, Manufacturing, or Industrial preferred) Strong understanding of electrical components, circuit design, and manufacturing processes Strong background in mechanical assembly Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills, with the ability to work collaboratively in a team environment. Proficient in Excel and data analysis Here are a few of our preferred experiences: Knowledge of SMT and PCBA Experience with shop floor systems Experience with Agile Experience in customer facing environment JS21 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Posting Start Date 12-08-2025 Job Posting End Date 02-08-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we are looking to add a Mechanical / Materials Science Engineer located in US California Milpitas. Reporting to the Director, Engineering Services, the Mechanical / Materials Science Engineer is responsible for designing, validating, and implementing innovative testing solutions of complex scope to support the Customer and organization during process development, validation, reliability, and failure analysis testing during prototype and through full-scale production. What a typical day looks like: Designing and implementing Lab automation equipment. Developing test methods for project specifications by studying product design, customer requirements, and performance standards. Know and understand the project scope, specifications, and any regulatory requirements that are applicable to the machine being developed. Performing detailed mathematical calculations to establish manufacturing and installation standards and specifications. Coordinate with and consult automation engineers to design, lay out, detail components on new and existing equipment. Work with Process or Customer engineers to help debug interactions between mechanical, electrical, and software systems. Attend meetings, present Analytical Lab Reports including project status and review meetings, and acceptance meetings. Assessing project requirements and researching to meet those requirements. Ensuring a product can be made reliably and will perform consistently in specified operating environments. Design of mechanical fixtures, adapters, and custom equipment. Testing, evaluating reliability and failure modes for defect analysis. modifying and re-testing the designed hardware. Drafting technical reports, in reference to PCBA drawings and technical documentation. Communicate and interface with customers, engineers, designers, and operations managers. Deploying Lab testing methods based on the systems at customer Products, facilities and gathering requirements. The experience we're looking to add to our team: Bachelor's degree in Mechanical Engineering or Material science background A minimum of 2-3 years of experience in a mechanical engineering role. Became lab expert on many tools in the lab in less than 2 years: CMM equipment (Zeiss and OGP), Strain Gauge using Site tester, X-Ray and Micro CT analysis, shadow moiré, and reliability chambers (Halt/Hass chamber, Temp/Humidity chamber, IPX). Maintained great collaboration with customers from requests to report discussion. Draft technical reports independently. Execute reliability and failure analysis tests. Use CAD software to create useful fixturing for the lab or for customer. 3D printing parts Lead ISO/IEC 17025 2017 certification in the lab. Maintaining now ISO/IEC 17025 2017 per quality manual Create procedures for the Lab Quality Manual for the ISO 17025 certification. Participate Lab Gemba walks with the team. Takes care of maintenance and PM of the tools Execute Lab Roadmap, Capex equipment acquisition. Support section for Site Monthly newsletter. Utilize Six sigma methodologies. PF38 #LI-PF1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$91,900.00 USD - $126,400.00 USD AnnualJob CategoryDesign, Process & Technology Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Posting Start Date 12-17-2025 Job Posting End Date 01-12-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary The Manufacturing Engineer will be based onsite in Austin, TX and will support the team at the Flex Austin site. The ME will design, deploy, launch and sustain manufacturing production lines for industrial equipment, machinery, and power equipment. The ME will work on the production floor as needed to ensure our products are produced safely, at the highest quality, delivered on time, and while maximizing efficiency. Here is a glimpse of what you'll do: Understand manufacturing concepts, technologies and techniques Designs manufacturing processes within schedule and budgetary parameters. Develops, evaluates, and improves manufacturing methods. Work with other engineering stakeholders and customers on problem solving and continuous improvement to the design of equipment and products and may develop corrective and preventive action plans May be involved in development and update of PFMEA for new products May participate in control plan development Write and update work instructions and other documents (e.g. specifications, procedures,…) Confers with production group concerning product design and tooling to ensure efficient production methods. Coordinates with customers to determine product specifications and design changes and responds to customer request. Provides information for management decisions from a technical and technical cost perspective. Applies statistical methods to estimate future manufacturing requirements and potential. Here is some of what you'll need (required): Bachelor degree in related field or equivalent experience and training. Typically requires 3 years of related experience. Ability to read and profile flow solder processes. (DataPaq) Understands the relationship between PCB thickness, PTH diameter & pin diameter. Working knowledge of IPC standards related to Flow solder processes. Microsoft office, specifically advanced Excel (Vlookup, pivot tables, macros) Demonstrates advanced functional and technical skills and basic process skills. Demonstrates advanced / thorough knowledge of the function and Flex business. Typically requires skill and troubleshooting, and diagnostics, and overview of the entire test process and the ability to train others. Able to run and explain simulations. Working knowledge of flow solder processes (Wave & Selective) Here are a few of our preferred experiences: Knowledge of SMT preferred Familiarity with Electrovert and Ersa is a plus JS21 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction EngineeringRelocation: Eligible for domestic relocation only Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Posting Start Date 11-20-2025 Job Posting End Date 01-19-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary The Manufacturing Engineer will be based in Austin, TX and will support the team at the Flex Austin site. The ME will design, deploy, launch and sustain manufacturing production lines for industrial equipment, machinery, and power equipment. The ME will work on the production floor as needed to ensure our products are produced safely, at the highest quality, delivered on time, and while maximizing efficiency. Here is a glimpse of what you'll do: Design, deploy, launch and sustain manufacturing production lines for industrial equipment, machinery, and power equipment. Will develop, implement and maintain manufacturing methods / detailed visual work instructions. Will be responsible for identifying and implementing manufacturing process improvements to improve productivity, workmanship and overall quality of the product. Will support implementing manufacturing procedures per customer specifications ECN-Engineering Change Notices. Will develop, organize and update manufacturing work areas, material flow, documentation and system setups for new products and features. Here is some of what you'll need (required): BS in Industrial or Mechanical Engineering degree required Must have 4+ years of experience in engineering specific role Experience in developing Manufacturing Procedures, Shop floor system setups, and evaluation / purchase of Assembly equipment and tools. Experience in identifying and implementing manufacturing process improvements to improve productivity, workmanship and overall quality of the product Experience in Lean Kaizen activities Knowledge of MRP and Shop Floor Manufacturing systems Individual must be a quick learner and be effective at working in a multi-tasking environment. Ability to perform job assignments with minimal supervision. Experience in MSWord, Excel and Web based tools such as Frontpage and HTML Ability to read and interpret documents such as safety rules, operating and maintenance instructions, design drawings and procedure manuals. Ability to write routine reports and correspondence Here are a few of our preferred experiences: Working directly with customers Prior experience in adhesive dispensing equipment/processes Implementing manufacturing procedures per Flex medical quality systems (ISO13485) Training Technicians and Operators on new products, processes and equipment. Ability to support weekend on call availability once monthly Analyze data and take appropriate action to meet KPI targets Lean Green Belt Certification JS21 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Posting Start Date 11-20-2025 Job Posting End Date 01-20-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Manufacturing Engineer located in Orangeburg, South Carolina. Reporting to the Manufacturing Engineering Manager. The Manufacturing Engineer primary focus of this position is identifying and implementing process improvements and cost reductions using accepted industrial engineering and lean manufacturing methodologies. This position will also support various projects related to Stamping, Welding, Laser cutting and Press Break and new and redesigned product launches. Shift: 7:00am - 4:30pm Mon - Fri Here is a glimpse of what you'll do: Define equipment maintenance requirements, identify root-causes of equipment failures and develop hands-on maintenance skills Experience in Stamping, Welding, Laser cutting and Press Break Work with other engineering stakeholders and customers on problem solving and continuous improvement to the design of equipment and products and may develop corrective and preventive action plans Develop new manufacturing processes, including layouts, PFD, PFMEA, CP, work instructions and training materials. Design special assembly tools, fixtures and equipment to be used for the assembly processes Develop detail drawings with tolerances and proper material call out for assembling tools, fixtures and equipment. Designing new systems and processes for the introduction of new products or for the improvement of existing ones. Install equipment, fixtures, specialty assembly tools, product lift assists and storage devices. Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service. Analyzes and designs layout of equipment and workspace for maximum efficiency. Meet with production group concerning product design and tooling to ensure efficient production methods. Coordinates with customers to determine product specifications and design changes and responds to customer requests. Provides information for management decisions from a technical and technical cost perspective. Meet with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes. Applies statistical methods to estimate future manufacturing requirements and potential. Plan utilization of facilities, equipment, materials, and personnel to improve efficiency of operations. Analyze work force utilization, facility layout, and operational data such as production costs, process flow diagrams, and production schedules to determine efficient utilization of workers and equipment. Recommend methods for improving worker efficiency and reducing waste of materials and utilities such as restructuring job duties, reorganizing workflow, relocating workstations and equipment, and purchase of equipment. Troubleshoot daily manufacturing issues. Here is some of what you'll need: Bachelor's degree in Mechanical Engineering and/or Manufacturing Engineering 3+ years of relevant experience in a high-volume manufacturing environment Computer skills include, but are not limited to: MS Office software applications (Word, Excel, PowerPoint, Project); AutoCAD, 3D CAD software, SolidWorks', Draft Sight Lean manufacturing methodologies and principles is desired. 5+ years with project management skills are preferred. Formal training and experience implementing lean strategies to improve process flow and reduce cost is preferred. Read and interpret drawing requirements and specifications is required. Excellent teamwork, interpersonal, and oral/written communication skills are required. Strong problem-solving and analytical skills Effectively manage multiple priorities simultaneously and meet critical deadlines. Prefer manufacturing/assembly automation experience. #LI- YV1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction EngineeringRelocation: Not eligible Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Commercial Aircraft is looking for an Aircraft Maintenance Programs Engineer (Contract) to join our Engineering department based in Mobile, AL. The Aircraft Maintenance Programs Engineer works within a group of maintenance programs engineers on assigned cabin and cargo, structures, and zonal tasks with the purpose to develop, challenge, identify, and select necessary Instructions for Continued Airworthiness, airworthiness limitations, and maintenance requirements for Airbus commercial programs. The Maintenance Programs Engineer supports America's regional customer airlines and also participates in Maintenance Review Board and Type Certification exercises. Meet the Team: Our Engineers have the privilege of working on complex, highly engineered machines and are involved at all stages of the aircraft life cycle, from product development to manufacturing and direct support to our airline customers. If you're interested in designing, creating, and testing the present and future of Airbus products across the globe, join our mission to connect the world. Your Working Environment: The Engineering Center in Mobile, Alabama houses hundreds of Airbus engineers who assist in the design and development of Airbus commercial aircraft cabins, including aftermarket upgrades, reconfigurations and services of all product types across the globe. Your Challenges: Develop the maintenance program for Airbus aircraft through common industry standards and the associated company processes and engineering tools Represent Airbus in operator meetings, technical conferences, international industry conferences and working groups Provide high-quality responses and assist with regular airline queries within a given target date Support Customer Airlines maintenance specific needs as they arise in the Americas region i.e. maintenance planning, optimizations, etc. Collaborate with other Airbus aircraft maintenance teams/departments to support the Customer Airlines and maintenance engineering activities Review aircraft modifications, vendor manuals, and industry directives; understanding the impacts to the specific aircraft systems and structures within the frame of maintenance programs engineering Support operator maintenance deviation requests via MSG-3 Analysis, in-service data, and engineering judgement Ensure transfer of in-service experience to design offices ensuring continuous improvement of in-service fleets and for new aircraft programs Improve the product reliability, maturity, and residual value of Airbus aircraft Keep a close relationship with Airworthiness Authorities and the maintenance engineering departments at the other Airbus sites Provide maintenance engineering advisement to other Customer Services divisions, as well as to other Airbus directorates (sales, marketing, certification) Your Boarding Pass: Bachelor's Degree in Engineering. (Mechanical, Aerospace, Electrical or Civil Engineering) ~1+ year experience in an engineering classification. 10% travel (Domestic and International) involved US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license), Authorized to work in the US. Proficiency with G Suite. Team oriented - ability to work as a member of a team with other departments locally and internationally. Ability to read/write/speak English. Ability to communicate effectively (written and verbal) with both internal and external customers in a professional manner. Demonstrates a high level of listening and speaking capabilities with all levels of management, internal and external. Demonstrates a refined approach to communication that resolves problems, facilitates consensus, and focuses on objectives. Displays model writing skills for others to emulate Demonstrates simple and effective ways to communicate. Able to represent Engineering in presentations at Airbus related activities. Basic technical knowledge on overall Service Bulletin process Preferred: Master's Degree in an Engineering discipline Minor in Computer Science Experience in the aircraft customer service field (Airline experience, MRO experience, Maintenance experience, etc.) Airbus experience with various Airbus programs (A380, A350, LR, SA, WB) Data analysis Physical Requirements: Onsite or remote: 100% onsite. Vision: able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings - part of daily job Hearing: able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms - part of daily job Speaking: able to speak in conversations and meetings, deliver information and participate in communications.- part of daily job Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate most office and personal electronic equipment - part of daily job Carrying: able to carry documents, drawings, electronic equipment up to 30lbs/14kgs. - part of daily job Lifting: able to lift documents, drawings, electronic equipment up to 30lbs/14kgs. - part of daily job Sitting: able to sit for long periods of time in meetings, working on the computer. - part of daily job Standing: able to stand for discussions in offices - part of daily job Travel: able to travel independently and at short notice. - as required based on job needs Walking (include routine walking such as to a shared printer to retrieve documents): able to walk through office areas including uneven surfaces. - part of daily job This role requires US Person status under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license) This position is a temporary (contract) position with no specific time period but could be extended or shortened as needed. Contractors are employed by a 3rd party vendor and placed on assignment to Airbus in America. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: Agency / Temporary Experience Level: Professional Remote Type: On-site Job Family: Structure Design & Integration ------ ------ Airbus provides equal opportunities to all individuals seeking assignment with Airbus without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in every location in which the company has facilities. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. This assignment description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Product & Process Development * Lead the development and implementation of manufacturing processes for new medical devices or components. * Own Design for Manufacturability (DFM) and manage design transfer from R&D to production. * Develop and optimize tooling, fixtures, automation strategies, and production workflows. * Support Design Verification & Validation (DV&V) activities, including test method development. * Conduct cost analysis for manufacturing including capital investments and make/buy decisions. Technical Leadership * Serve as the technical subject matter expert (SME) on cross-functional project teams. * Collaborate with R&D, Quality, Regulatory, and Operations to ensure product performance and manufacturability. * Engage with customers to communicate process capabilities, validation strategies, and DFM recommendations. * Lead root cause investigations, corrective actions (CAPAs), and implement design or process improvements. Validation & Compliance * Develop and execute IQ/OQ/PQ protocols for equipment and process validation. * Ensure compliance with FDA 21 CFR Part 820, ISO 13485, and other applicable global regulations. * Maintain documentation and traceability in alignment with design controls and quality systems. * Bachelor's degree in Mechanical Engineering, Biomedical Engineering, or related field. Masters preferred * 8-10+ years of experience in medical device design, manufacturing, or process engineering. Strong knowledge of: * Medical device regulations (FDA, ISO 13485, EU MDR) * Validation protocols (IQ/OQ/PQ) * CAD tools (e.g., SolidWorks, Creo) * Statistical tools (DOE, Minitab, Six Sigma) Preferred Skills & Experience: * Experience with Class II or III implantable or disposable medical devices. * Hands-on expertise with manufacturing processes such as injection molding, laser welding, metal stamping, packaging, or sterilization. * Familiarity with design controls and PLM systems (e.g., Agile, Windchill). * Certified Six Sigma Green/Black Belt or Certified Quality Engineer (CQE). * Strong written and verbal communication skills; capable of authoring technical reports, protocols, and presenting to stakeholders. At Knowles, we strive to deliver a Total Rewards package that will attract, engage, and retain top talent. The salary range for this position is $112,000.00/yr - $170,000.00/yr. This is a good faith estimate on the applicable range and serves as a general guideline. We recognize that candidates will come to us with different sets of skills and experiences. Therefore, the offer will be determined more or less than the anticipated range after considering various factors, including but not limited to the scope and responsibilities of the position, the candidate's experience, education, skills and abilities as well as internal equity and alignment with market data. Certain roles may be eligible for other compensation and benefits programs. Benefits and other Compensation Programs At Knowles, we strive to deliver a market competitive compensation and benefits programs that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The specific programs and options available to any given employees may vary depending on eligibility factors such as geographic location, date of hire, candidate experience and qualifications as well as market and business considerations. We also provide eligible employees with an opportunity to enroll in a variety of benefit programs, generally including medical, dental and vision insurance, a 401(k) plan with a company match, short-term and long-term disability coverage, life insurance and wellbeing benefits, among others. Below is a summary of common benefits that Knowles provides to employees (eligibility requirements apply): * Medical, dental and vision * Health Savings Account (HSA) / Flexible Spending Accounts (FSA) * 401K plan with a company match - 100% match on the first 5% you contribute * Short- and Long-term disability coverage * Life Insurance and AD&D - 100% paid by employer * Employee Assistance Program (EAP) EOE/M/F/D/V

For this U. S. based position, the expected compensation range is $86,640-$120,960 per year, which includes base pay and short-term incentive. The compensation range for this full-time position applies to candidates located within the United States. Our salary ranges are determined by reviewing roles of similar responsibility and level. Within the salary range, individual pay is determined by several factors including performance, knowledge, job-related skills, experience, and relevant education or training. Schneider Electric also offers a comprehensive benefits package to support our employees, inclusive of medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks (credits to apply towards your benefits) flexible work arrangements, paid family leaves, 401(k) + match, well-being and recognition (including service anniversary) programs, 12 holidays per year, 15 days of paid time off per year (pro-rated in the first year of employment based on start date), opportunity to purchase company stock (eligibility depends on start date), and military leave benefits. Schneider Electric has a meaningful opportunity for an Application Design Engineer - HVAC, Refrigeration, Pump. Description: This role is at the forefront of application software development and integration in industrial applications. The Application Design Engineer performs a variety of technical assessments and development activities related to the application and integration of Schneider Electric EcoStruxure Machine and Industrial Automation Business software. The primary requirement of this role is to review, develop, present, and support control system development for Schneider Electric OEM customers. The ADE team performs the following: Integration of multi-product software environments using a combination of off-the-shelf and custom-developed software. Consultation on the application of Machine Software packages and Schneider Electric Industry business unit automation and control solutions. Work as part of a multi-functional team supporting customers with development, implementation, and integration of Schneider OEM automation and control solutions. Developing and presenting technical solutions and delivering customized training to customers. Leading specification, design, analysis, and development of engineering projects within defined scope. Testing and development of proof of concepts of industrial automation software with SE products based on customer opportunities. Developing technical documentation, including bill of materials, User's Requirements Specifications, Detailed Design Specifications, Factory Acceptance Tests, and electrical schematics. Required Qualifications: Bachelor of Science degree in Electrical, Computer Science, Automation Engineering or similar 3+ years' of proven experience in developing machine code with IEC 61131-3 Structured Text, and Ladder Logic languages. 3+ years' of proven experience with developing industrial automation systems architectures in the HVAC, Refrigeration Cycle, and building automation applications for OEMs Ability to be a self-starter to work independently and as a part of a large team Proven problem-solving skills with experience troubleshooting simple to complex Industrial Automation systems, sometimes at customer sites. Applied knowledge and troubleshooting experience of Industrial networks of communication protocols (Modbus TCP/IP, BACnet, IP/MSTP, SNMP configuration, VPN, remote connectivity, etc) 3+ years' proven experience in development HMI [Human Machine Interface] graphics, code for industrial automation systems. Strong Communication sills to initiate, manage, and communicate status and feedback to all customer stakeholders in customer projects Proven experience with presenting simple to complex technical industrial automation topics to customers and internal stakeholders. Preferred Qualifications Previous expertise in either Schneider EcoStruxure Machine Expert, Carel C. Suite, Automated Logic ALC, Johnson Control's, or Emerson's Control system. Experience in installation of panel terminations based on submittals, suggesting system improvements, modifications, etc. Experience in 3rd party commissioning agents in the commissioning process and lead communication of deficiencies to the project team. Experience in Project Management methodologies in scheduling, prioritization, and identifying obstacles for startup tasks. Experience in high level programming languages (e. g. C#, Python, Object Oriented Programming concepts etc. ) Experience with Safety architectures for Machines Travel Requirements: ~30% required (domestic and/or international) Travel to customer sites is required for project kickoff meetings and commissioning. Additional travel may be required for assisting OEM sales in technical discussions with our customers, assisting with tradeshows, and internationally for segment-specific training. Let us learn about you! Apply today. You must submit an online application to be considered for any position with us. This position will be posted until filled. Looking to make an IMPACT with your career? When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values - Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork - starts with us. IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world. We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one. Become an IMPACT Maker with Schneider Electric - apply today! €36 billion global revenue +13% organic growth 150 000+ employees in 100+ countries #1 on the Global 100 World's most sustainable corporations You must submit an online application to be considered for any position with us. This position will be posted until filled. Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and 'inclusion' is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter here Schneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

For this U. S. based position, the expected compensation range is $80,000-$120,960 per year, which includes base pay and short-term incentive. The compensation range for this full-time position applies to candidates located within the United States. Our salary ranges are determined by reviewing roles of similar responsibility and level. Within the salary range, individual pay is determined by several factors including performance, knowledge, job-related skills, experience, and relevant education or training. Schneider Electric also offers a comprehensive benefits package to support our employees, inclusive of medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks (credits to apply towards your benefits) flexible work arrangements, paid family leaves, 401(k) + match, well-being and recognition (including service anniversary) programs, 12 holidays per year, 15 days of paid time off per year (pro-rated in the first year of employment based on start date), opportunity to purchase company stock (eligibility depends on start date), and military leave benefits. You must submit an online application to be considered for the position. The Company will accept applications on an ongoing basis until the position is filled. Schneider Electric has a meaningful opportunity for an Application Design Engineer - HVAC, Refrigeration, Pump. This role is at the forefront of application software development and integration in industrial applications. The Application Design Engineer performs a variety of technical assessments and development activities related to the application and integration of Schneider Electric EcoStruxure Machine and Industrial Automation Business software. The primary requirement of this role is to review, develop, present, and support control system development for Schneider Electric OEM customers. The ADE team performs the following: Integration of multi-product software environments using a combination of off-the-shelf and custom-developed software. Consultation on the application of Machine Software packages and Schneider Electric Industry business unit automation and control solutions. Work as part of a multi-functional team supporting customers with development, implementation, and integration of Schneider OEM automation and control solutions. Developing and presenting technical solutions and delivering customized training to customers. Leading specification, design, analysis, and development of engineering projects within defined scope. Testing and development of proof of concepts of industrial automation software with SE products based on customer opportunities. Developing technical documentation, including bill of materials, User's Requirements Specifications, Detailed Design Specifications, Factory Acceptance Tests, and electrical schematics. Travel Requirements: 30% required (domestic and/or international) What qualifications will make you successful for this role? Bachelor of Science degree in Electrical, Computer Science, Automation Engineering or similar. 3+ years' of proven experience in developing machine code with IEC 61131-3 Structured Text, and Ladder Logic languages. 3+ years' of proven experience with developing industrial automation systems architectures in the HVAC, Refrigeration Cycle, and building automation applications for OEMs. Ability to be a self-starter to work independently and as a part of a large team. Proven problem-solving skills with experience troubleshooting simple to complex Industrial Automation systems, sometimes at customer sites. Applied knowledge and troubleshooting experience of Industrial networks of communication protocols (Modbus TCP/IP, BACnet, IP/MSTP, SNMP configuration, VPN, remote connectivity, etc). 3+ years' proven experience in development HMI [Human Machine Interface] graphics, code for industrial automation systems. Strong Communication sills to initiate, manage, and communicate status and feedback to all customer stakeholders in customer projects. Proven experience with presenting simple to complex technical industrial automation topics to customers and internal stakeholders. Preferred Qualifications: Previous expertise in either Schneider EcoStruxure Machine Expert, Carel C. Suite, Automated Logic ALC, Johnson Control's, or Emerson's Control system. Experience in installation of panel terminations based on submittals, suggesting system improvements, modifications, etc. Experience in 3rd party commissioning agents in the commissioning process and lead communication of deficiencies to the project team. Experience in Project Management methodologies in scheduling, prioritization, and identifying obstacles for starup tasks. Experience in high level programming languages (e. g. C#, Python, Object Oriented Programming concepts etc. ) Experience with Safety architectures for Machines Travel to customer sites is required for project kickoff meetings and commissioning. Additional travel may be required for assisting OEM sales in technical discussions with our customers, assisting with tradeshows, and internationally for segment-specific training. Let us learn about you! Apply today. You must submit an online application to be considered for any position with us. This position will be posted until filled. Looking to make an IMPACT with your career? When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values - Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork - starts with us. IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world. We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one. Become an IMPACT Maker with Schneider Electric - apply today! €36 billion global revenue +13% organic growth 150 000+ employees in 100+ countries #1 on the Global 100 World's most sustainable corporations You must submit an online application to be considered for any position with us. This position will be posted until filled. Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and 'inclusion' is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter here Schneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

For this U. S. based position, the expected compensation range is $86,640-$120,960 per year, which includes base pay and short-term incentive. The compensation range for this full-time position applies to candidates located within the United States. Our salary ranges are determined by reviewing roles of similar responsibility and level. Within the salary range, individual pay is determined by several factors including performance, knowledge, job-related skills, experience, and relevant education or training. Schneider Electric also offers a comprehensive benefits package to support our employees, inclusive of medical (with member reward points), dental, vision, and basic life insurance, Benefit Bucks (credits to apply towards your benefits) flexible work arrangements, paid family leaves, 401(k) + match, well-being and recognition (including service anniversary) programs, 12 holidays per year, 15 days of paid time off per year (pro-rated in the first year of employment based on start date), opportunity to purchase company stock (eligibility depends on start date), and military leave benefits. Schneider Electric has a meaningful opportunity for an Application Design Engineer - HVAC, Refrigeration, Pump. Description: This role is at the forefront of application software development and integration in industrial applications. The Application Design Engineer performs a variety of technical assessments and development activities related to the application and integration of Schneider Electric EcoStruxure Machine and Industrial Automation Business software. The primary requirement of this role is to review, develop, present, and support control system development for Schneider Electric OEM customers. The ADE team performs the following: Integration of multi-product software environments using a combination of off-the-shelf and custom-developed software. Consultation on the application of Machine Software packages and Schneider Electric Industry business unit automation and control solutions. Work as part of a multi-functional team supporting customers with development, implementation, and integration of Schneider OEM automation and control solutions. Developing and presenting technical solutions and delivering customized training to customers. Leading specification, design, analysis, and development of engineering projects within defined scope. Testing and development of proof of concepts of industrial automation software with SE products based on customer opportunities. Developing technical documentation, including bill of materials, User's Requirements Specifications, Detailed Design Specifications, Factory Acceptance Tests, and electrical schematics. Required Qualifications: Bachelor of Science degree in Electrical, Computer Science, Automation Engineering or similar 3+ years' of proven experience in developing machine code with IEC 61131-3 Structured Text, and Ladder Logic languages. 3+ years' of proven experience with developing industrial automation systems architectures in the HVAC, Refrigeration Cycle, and building automation applications for OEMs Ability to be a self-starter to work independently and as a part of a large team Proven problem-solving skills with experience troubleshooting simple to complex Industrial Automation systems, sometimes at customer sites. Applied knowledge and troubleshooting experience of Industrial networks of communication protocols (Modbus TCP/IP, BACnet, IP/MSTP, SNMP configuration, VPN, remote connectivity, etc) 3+ years' proven experience in development HMI [Human Machine Interface] graphics, code for industrial automation systems. Strong Communication sills to initiate, manage, and communicate status and feedback to all customer stakeholders in customer projects Proven experience with presenting simple to complex technical industrial automation topics to customers and internal stakeholders. Preferred Qualifications Previous expertise in either Schneider EcoStruxure Machine Expert, Carel C. Suite, Automated Logic ALC, Johnson Control's, or Emerson's Control system. Experience in installation of panel terminations based on submittals, suggesting system improvements, modifications, etc. Experience in 3rd party commissioning agents in the commissioning process and lead communication of deficiencies to the project team. Experience in Project Management methodologies in scheduling, prioritization, and identifying obstacles for startup tasks. Experience in high level programming languages (e. g. C#, Python, Object Oriented Programming concepts etc. ) Experience with Safety architectures for Machines Travel Requirements: ~30% required (domestic and/or international) Travel to customer sites is required for project kickoff meetings and commissioning. Additional travel may be required for assisting OEM sales in technical discussions with our customers, assisting with tradeshows, and internationally for segment-specific training. Let us learn about you! Apply today. You must submit an online application to be considered for any position with us. This position will be posted until filled. Looking to make an IMPACT with your career? When you are thinking about joining a new team, culture matters. At Schneider Electric, our values and behaviors are the foundation for creating a great culture to support business success. We believe that our IMPACT values - Inclusion, Mastery, Purpose, Action, Curiosity, Teamwork - starts with us. IMPACT is also your invitation to join Schneider Electric where you can contribute to turning sustainability ambition into actions, no matter what role you play. It is a call to connect your career with the ambition of achieving a more resilient, efficient, and sustainable world. We are looking for IMPACT Makers; exceptional people who turn sustainability ambitions into actions at the intersection of automation, electrification, and digitization. We celebrate IMPACT Makers and believe everyone has the potential to be one. Become an IMPACT Maker with Schneider Electric - apply today! €36 billion global revenue +13% organic growth 150 000+ employees in 100+ countries #1 on the Global 100 World's most sustainable corporations You must submit an online application to be considered for any position with us. This position will be posted until filled. Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best. We mirror the diversity of the communities in which we operate, and 'inclusion' is one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. At Schneider Electric, we uphold the highest standards of ethics and compliance, and we believe that trust is a foundational value. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders. You can find out more about our Trust Charter here Schneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

AOSense, Inc. is the leading developer and manufacturer of innovative quantum technologies employing atom optics. Our devices use frequency-stabilized lasers and atoms in a vacuum cell to measure accelerations, rotations, magnetic fields, and time with unparalleled accuracy and stability. Our staff includes physicists and engineers with expertise covering a wide array of disciplines. Our teams are dynamic and fast paced since our hardware is cutting edge. POSITION SUMMARY: We are seeking an R&D engineer who specializes in compact and robust mechanical and optical design, assembly, and testing. As a hands-on R&D Engineer at AOSense, you will work with physicists and engineers to develop and test high-performance, fieldable accelerometers, gyroscopes, gravimeters, atomic clocks, frequency standards, and magnetometers. RESPONSIBILITIES: Collaborate with physicists and engineers to rapidly iterate designs and prototypes Work with electrical, mechanical, and optical engineers to create, assemble, and test complex sensor and clock hardware Procure mechanical and optical components Coordinate component and subsystem fabrication and assembly Assemble and test vacuum systems Align lasers through single-mode optical fibers and through bulk electro-optic and acousto-optic devices Collaborate with electrical engineers to define, document, and implement PCB test plans Build and test prototype circuits and test fixtures Procure and maintain mechanical and optical test equipment Report results of validation testing Requirements Demonstrated success in building complex optomechanical prototypes and products Willingness to become an expert at new fabrication disciplines Hands-on experience with precision test equipment Excellent analytical and troubleshooting skills Applicants should thrive in a dynamic environment U.S. Government contracts require applicants to be U.S. citizens or permanent residents DESIRED EXPERIENCE: Skilled in mechanical prototyping, including basic machining and finishing operations Hands-on experience with vacuum system design, assembly, and testing Expertise in aligning and securing micro-optics components Basic understanding of Gaussian beam optics Experience with optical testing of polarization, wavefront flatness, reflectivity, optical phase shifts, beam aberrations, etc. Operational familiarity with laser frequency stabilization Skilled in electrical prototyping, including PCB fabrication, assembly, soldering, and rework Experience testing low-noise analog, mixed-signal, and rf electronics Basic knowledge of data acquisition and simulation software such as MATLAB, LabVIEW, Visual Basic, Python, and C or C++ Experience with mechanical and optical design software (e.g., SolidWorks, COMSOL, ANSYS, Zemax, and FRED) Familiarity with OrCAD/Altium schematic capture and PCB layout Experience developing flight-qualified hardware Hands-on experience with optical test equipment EDUCATION AND EXPERIENCE: Bachelor's degree in physics or engineering, or equivalent professional experience, with experience in an R&D environment Benefits Salary depends on qualifications and experience Medical and dental Retirement Stock plan AOSense is an equal opportunity employer (EOE) and considers qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran or disability status, or any other federal, state or local protected class. AOSense is committed to providing equal employment opportunity to qualified individuals with disabilities. If you are disabled and require special assistance or a reasonable accommodation while seeking employment with AOSense, then please contact us via email at ******************* or call ************** x210

Job Description AOSense, Inc. is the leading developer and manufacturer of innovative quantum technologies employing atom optics. Our devices use frequency-stabilized lasers and atoms in a vacuum cell to measure accelerations, rotations, magnetic fields, and time with unparalleled accuracy and stability. Our staff includes physicists and engineers with expertise covering a wide array of disciplines. Our teams are dynamic and fast paced since our hardware is cutting edge. POSITION SUMMARY: We are seeking an R&D engineer who specializes in compact and robust mechanical and optical design, assembly, and testing. As a hands-on R&D Engineer at AOSense, you will work with physicists and engineers to develop and test high-performance, fieldable accelerometers, gyroscopes, gravimeters, atomic clocks, frequency standards, and magnetometers. RESPONSIBILITIES: Collaborate with physicists and engineers to rapidly iterate designs and prototypes Work with electrical, mechanical, and optical engineers to create, assemble, and test complex sensor and clock hardware Procure mechanical and optical components Coordinate component and subsystem fabrication and assembly Assemble and test vacuum systems Align lasers through single-mode optical fibers and through bulk electro-optic and acousto-optic devices Collaborate with electrical engineers to define, document, and implement PCB test plans Build and test prototype circuits and test fixtures Procure and maintain mechanical and optical test equipment Report results of validation testing Requirements Demonstrated success in building complex optomechanical prototypes and products Willingness to become an expert at new fabrication disciplines Hands-on experience with precision test equipment Excellent analytical and troubleshooting skills Applicants should thrive in a dynamic environment U.S. Government contracts require applicants to be U.S. citizens or permanent residents DESIRED EXPERIENCE: Skilled in mechanical prototyping, including basic machining and finishing operations Hands-on experience with vacuum system design, assembly, and testing Expertise in aligning and securing micro-optics components Basic understanding of Gaussian beam optics Experience with optical testing of polarization, wavefront flatness, reflectivity, optical phase shifts, beam aberrations, etc. Operational familiarity with laser frequency stabilization Skilled in electrical prototyping, including PCB fabrication, assembly, soldering, and rework Experience testing low-noise analog, mixed-signal, and rf electronics Basic knowledge of data acquisition and simulation software such as MATLAB, LabVIEW, Visual Basic, Python, and C or C++ Experience with mechanical and optical design software (e.g., SolidWorks, COMSOL, ANSYS, Zemax, and FRED) Familiarity with OrCAD/Altium schematic capture and PCB layout Experience developing flight-qualified hardware Hands-on experience with optical test equipment EDUCATION AND EXPERIENCE: Bachelor's degree in physics or engineering, or equivalent professional experience, with experience in an R&D environment Benefits Salary depends on qualifications and experience Medical and dental Retirement Stock plan AOSense is an equal opportunity employer (EOE) and considers qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran or disability status, or any other federal, state or local protected class. AOSense is committed to providing equal employment opportunity to qualified individuals with disabilities. If you are disabled and require special assistance or a reasonable accommodation while seeking employment with AOSense, then please contact us via email at ******************* or call ************** x210

Job DescriptionDescription: Advanced Cooling Technologies, Inc. (ACT) is a premier thermal solutions provider providing component and system level solutions and structures. Our products and technologies have become integral parts of numerous mission-critical devices, including life-saving MRI and CT scanners, US Military applications, weather and telecommunication satellites, exploratory space missions, and much more. We are proud to be doing work that really makes a difference in our world- and beyond! Manufacturing Engineer - Satellite Structures As a Manufacturing Engineer specializing in Satellite Structures, you will lead project management activities while collaborating closely with customers and production teams to ensure program success. Our work environment demands a candidate with the ability to take on multiple responsibilities in a fast-paced environment. We are looking for team players who enjoy working with customers, vendors, and co-workers to provide the best service and solutions. The best candidates will be those who embrace new challenges, using critical thinking skills, and developing innovative solutions. Primary Responsibilities: Manage schedules, resources, and deliverables for complex composite manufacturing projects. Drive program execution from planning through delivery, ensuring alignment with customer requirements and budget. Support secondary activities in design, manufacturing, quality assurance, tooling, and materials as needed. Frequent customer communication/interaction Hands-on experience with design for manufacturability (DFM) and prototype hardware fabrication and testing is a plus! We offer an attractive and competitive compensation/benefits package, which includes a profit-sharing bonus plan. Our work environment is comfortable, collaborative, and stimulating. Apply now to get started on a career with ACT! If you are looking for an opportunity to start a career with a growing company doing exciting andimportant work, please apply today! ACT is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with a disability, or any other trait protected by law. E-verify employer. Requirements: B.S. or M.S. degree in Mechanical Engineering or Aerospace Engineering. Knowledge of Advanced Fiber-Reinforced and/or Aluminum Honeycomb Composites and associated manufacturing methods. Ability to operate in a fast-paced environment and contribute immediately upon hire. Must be a US Person as defined by 22 C.F.R. §120.15? (U.S. Citizen, lawful permanent resident, refugee or asylee.)

Chemical Engineer About the Job Thatcher Company is seeking a Process Engineer to join our engineering team in Sacramento, California. In this role, you will provide process engineering and technical support to plant operations, capital projects, and other teams. You will work closely with operations and the business team to identify process improvement opportunities, implement plant improvement projects, and drive innovative solutions. What You Will Do * Promote understanding and application of safety practices. * Optimize plant production and efficiency by the implementation of improvement opportunities and management of process constraints. * Work with operations and manufacturing experts to resolve technical issues. * Develop and maintain process documentation and safety information such as P&IDs, material balances, equipment datasheets, process line sizing calculations, hydraulic calculations and datasheets for instruments and relief devices. * Contribute to process safety and environmental performance through participation in process hazards analysis (PHA), management of changes (MOC), and incident investigation. * Manage small capital projects from design through startup.

Job Description Assist with planning, designing, implementing and maintaining the infrastructure and equipment within our Knapheide Truck Equipment Center facilities. Manage projects related to building systems. Support Knapheide Truck Equipment Centers with designing, implementing and optimizing manufacturing processes. Focus on improving efficiency, quality and cost by analyzing existing systems, developing new equipment and/or processes. Duties & Responsibilities: Assist Facilities Manager with new/expanded/remodeled sites including facility/site layouts, facility design, site design, capital planning, construction management, capital purchases, production line layouts, racking, paint booths, overhead cranes, equipment procurement, etc. Evaluate existing processes to identify areas that could benefit from changes and/or improvements. Responsible for specifications, designs, sourcing and project management of line layouts, tooling, fixtures and equipment projects for both equipment center operations and fleet run operations. Define, document and implement new and changed manufacturing and installation processes. Evaluate processes across multiple locations and determine best practices for standardization across all equipment centers. Gather and organize necessary data for justification of projects requiring capital investment. Position Requirements: Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering or Construction Management preferred. Experience running large scale/capital projects preferred. Experience with Procore and Bluebeam is preferred. 3-5 years of relevant work experience is preferred. Must be willing to work in a fast-paced environment and be a self-motivator with a sense of urgency. Strong organizational, analytical and communication skills. SolidWorks (or other solid modeling software), 2D CAD and MS Office knowledge are a must. Ability to manage multiple projects in a cross functional team and communicate progress across all levels of management. 25-50% travel expected. Physical/Mental Requirements Needed to Perform the Essential Functions of the Position: Normal standing, bending, walking or lifting ability associated with an office environment. Capable of working in an industrial manufacturing environment in proximity to sources of noise, weld flash, and metal dust. Must be capable of communicating verbally with individuals at all levels of the organization and have good critical reasoning, organization, and mechanical skills.