Installation technician jobs in West Allis, WI

Details Department:Imaging Schedule:Full Time|Evening|8 hr Shifts Hospital:All Saints Hospital *NEW GRADS Welcome!* #NextGenHealthcare Benefits Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Responsibilities Perform computerized tomographic procedures for the diagnosis of disease and injury according to protocols established by radiologists. Prepare and position patients and select anatomic and technical parameters accurately. Prepare and administer contrast media and/or medications within the accepted scope of practice and applicable state and federal regulations. Observe patient during procedure and report abnormal activity. Monitor protocols and recommend updates or refinements as warranted. Follow radiation safety procedures and guidelines. Requirements Licensure / Certification / Registration: BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Radiologic Technologist credentialed from the Wisconsin Radiography Examining Board obtained prior to hire date or job transfer date required. One or more of the following required: Nuclear Medical Tech credentialed from the Nuclear Medicine Technology Certification Board (NMTCB) obtained prior to hire date or job transfer date. NMTCB(CT) Computed Tomography Specialty Certification or ARRT(CT) Radiologic Technologist specializing in Computed Tomography required in addition to CNMT Certified Nuclear Medicine Technologist Certification. Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Nuclear Medicine or Radiation Therapy specialty also accepted. Radiologic Technologist specializing in Computed Tomography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Education: High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. Why Join Our Team Ascension Wisconsin has been providing rewarding careers to healthcare professionals since 1848. Operating 17 hospital campuses and over 100 related healthcare facilities from Racine to Appleton, you will find opportunities that allow you to create a career path you love, all while delivering compassionate, personalized care to the communities we serve. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Equal Employment Opportunity Employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the EEO Know Your Rights (English) poster or EEO Know Your Rights (Spanish) poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Pay Non-Discrimination Notice Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This Ministry does not participate in E-Verify and therefore cannot employ STEM OPT candidates.

We are seeking Cable Techs to support structured cabling and low voltage work at a hyperscale data center project. Ideal candidates will have electrical, wiring, or cabling experience. This role offers plenty of overtime-up to 60 hours a week-perfect for someone looking to earn and grow in a fast-paced environment. What You'll Do: Install, terminate, and splice CAT5e, CAT6, and fiber optic cables Run and route cable, label, dress, and assist with testing Help build out MDF/IDF rooms, racks, patch panels, and trays Follow all site safety and quality standards Work alongside experienced techs and learn on the job What We're Looking For: 2-3 years of experience working in Data Center environments - structured cabling or low voltage Comfortable using hand/power tools and working on ladders or lifts Reliable, hardworking, and eager to learn Open to working overtime and weekends as needed Experience with copper and fiber terminations Must have PPE and reliable transportation OSHA/BICSI certs a plus

Title: Inventory Technician (Medical Equipment) Type: Contract Role Pay: $20/ hr Day-to-Day Responsibilities As a Real-Time Location Services (RTLS) Installation Technician, you will be part of the RTLS Installation Team responsible for deploying RTLS systems at existing hospital client sites. Tagging medical equipment with RTLS stickers Matching RTLS tags with device IDs in the client's mobile app Ensuring accuracy and attention to detail during tagging and data entry Understanding which devices are in scope for tagging Communicating process improvements and flagging risks to the project lead Must-Have Qualifications Strong communication skills in a hospital setting (interacting with staff, patients, and guests) High school diploma or GED Reliable transportation Preferred Qualifications Prior experience working in a hospital environment Education or training in technical/electronics fields or equivalent military experience

The Fiberglasser is required to inspect, repair and rehab equipment throughout the Park. Responsibilities: KEY DUTIES AND RESPONSIBILITIES: Perform general fiberglass repairs on equipment Perform automotive paint refinishing Complete safety inspections of Park equipment Maintain padding and upholstery of equipment Document work performed Maintain a safe and clean work environment Assist with Park operation responsibilities, as needed Qualifications: SKILLS AND QUALIFICATIONS: Minimum of one year experience in body/fiberglass repair Must possess mechanical aptitude Must be able to work at various heights including in excess of 150 feet Must be capable of climbing ladders, scaffolding, buildings and ride structures Must possess strong safety sensitivity Must have a high school diploma or equivalent as well as additional training or background in fiberglass repair and body work Must possess a willingness and ability to work varied shifts and schedules, including nights, weekends, and holidays Must possess a valid driver's license Must be at least 18 years old

Our client is on the search for a 1st shift shop or field service technician for an industrial machinery manufacturing and industrial repair facility that troubleshoots, repairs and rebuilds hydraulic systems, pneumatic assemblies, cylinders, and pumps. In-house shop mechanic 1st shift- $22-$30/hour d.o.e (training available) Field Service Repair Tech-$32-$50/hour is possible. *Offers a bonus at 6 months and 1 year totaling $5,000 bonus* Company has in-house mechanics and machinists to work as a team in repairing and refurbish work. Great opportunity-(contract-to-direct) permanent position, good pay, insurance vacation, uniforms, 401k and bonuses. Qualifications Strong written and verbal communication skills Ability to travel Ability to lift up to 75 pounds Valid Drivers License

Field Service Engineer Waukesha, WI (onsite and 50% travel) Direct Hire You will be providing service to optimize the production from our machines at their facilities. Because of that, our service engineers are in high demand and provide a consistent factory presence on site. A Field Service Engineer is primarily responsible for performing maintenance and repairs on our equipment as well as supporting project start-up installations at client locations across the US and Canada. We provide an in-house repair service for our customers as well as an innovation space for customers to learn from our experienced technologists, and test & train with their formulas & ingredients on our equipment. And of course, we stock a lot of spare parts for our customers in the USA and in Canada. Responsibilities Maintenance and Repair: Performing routine maintenance and diagnosing problems. Repairing or replacing defective parts to ensure functionality. Troubleshooting: Quickly identifying the source of problems and implementing effective solutions for mechanical, electrical, pneumatic, and electronic control systems. Installation and Setup: Installing and configuring equipment and systems according to specifications. Customer Support: Providing training and support to the customer's own in-house technicians on how to use the equipment effectively and perform routine maintenance. Documentation: Keeping detailed records of services performed, parts used, and hours worked. Compliance and Safety: Ensuring all work complies with company policies and safety standards. Other duties As required. Travel Requirements: Willingness to travel to client sites 50% minimum. Travel is primarily by automobile, however some air travel both domestically and international may be required. Skills and Abilities (Required) The ideal candidate should be a highly driven and self-disciplined person who can work independently and occasionally manage tight deadlines effectively. Must be able to work in an industrial production shop floor environment and be willing to work overtime hours when required. Education: Certificate or degree in a technical field such as electronics, engineering, or similar technology via Trade school, Technical School, College, or Military Technical School. Experience: 1+ years in a technical field working with hand tools and basic electrical test equipment. Technical Skills: Extensive knowledge of machinery ideally in the food/beverage/packaging industry and demonstrated proficiency in electrical and mechanical skills. Ability to read diagrams, schematic drawings, engineering specifications and manuals to determine work procedures. Communication Skills: Strong ability to communicate effectively with customers and team members. Problem-Solving Skills: Excellent analytical and problem-solving abilities. Physical Requirements: Capability to perform physical tasks, which may include lifting heavy equipment (occasionally over 50 lbs.). Driver's License: Required current valid driver's license and clean history. Experience (Preferred): Previous experience working on food manufacturing equipment. A working knowledge of Servo drives, variable frequency drives (VFDs), or PLCs is a plus. Compensation and Rewards: Competitive wages and profit-sharing plan 15 days PTO in the first year Double pay in case of Sunday work Health care package (medical, dental, vision, disability) Open and honest family-like work atmosphere “Ascendo is a certified minority owned staffing firm, we welcome and celebrate diversity. Ascendo is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, retaliation, parental status, military service or any non-merit factor.”

We are Toshiba. We have an unwavering drive to make and do things that lead to a better world. At Toshiba, we commit to raising quality of life for people around the world, ensuring progress that is in harmony with our planet. Our core values include: Do the Right Thing, Look for a better way, Always consider the impact and Create Together. Toshiba America Energy Systems Corporation (TAES) provides energy industry solutions - new equipment, retrofits, maintenance, outage planning and more - for current and future power generation needs in the Americas, including thermal, hydro and nuclear power plants. Position Summary We are seeking a Field Service Repair Technician to work out of our Milwaukee Service Center. The FS Repair Technician involves troubleshooting and repairing turbines, stators, and rotors in generators at customer locations. The candidate will learn to operate test equipment, diagnose issues, and determine necessary repairs. Responsibilities include assisting in testing components, using precision measuring instruments, and working under close supervision with inspections. The role also involves coordinating field service tooling and maintaining a professional image at job sites. The candidate should have a strong desire to advance to the Generator Technician position. Essential Duties Help to construct and operate testing equipment to identify problems and determine necessary field service. Assist with paperwork, including test data, daily logs, job information, timesheets, and final reports. Learn procedures for rewinding, re-wedging, re-blocking, rebuilding stator bars/coils or cores, and repairing turbines and related components. Gain knowledge in winding insulation, curing, cooling stator bars/coils, and blocking bars/coils. Build and assemble slot wedges into stator core grooves. Acquire skills in stator core construction methods, including flooding, end winding, side bar packing, top and bottom filler, and resistance temperature detectors. Work with various resins and solvents. Become proficient with various hand and power tools. Learn to operate a portable milling machine and wire welding procedures. Help inventory and ensure supplies and equipment are in good working order before and after job site visits. Operate overhead cranes and lift trucks properly. Maintain a simplified tooling process by ensuring all responsible parties for a field project are aware of all tools sent out. Prepare purchase requisitions for tooling, materials, and chemicals, coordinating with various suppliers. Customize tooling designs or fabrication with various departments. Coordinate shipping and receiving of field service tooling to job sites. Inspect tools, including calibration and restocking, and follow procedures for testing electrical equipment. Coordinate the calibration of tooling and fabricate or modify as needed. Develop a mindset for service and courtesy. Perform other tasks requiring similar or lesser skills, usually of short duration to meet field service requirements. Travel Up to 90% Education and Required Experience High School Diploma or Equivalent. Trade or Technical Degree in a related field preferred. 1-3 years of experience with working knowledge of shop practices and basic electrical and mechanical fundamentals, gained through vocational training. Minimum 3 years previous experience in a similar or related role or 1-3 years' experience in power generation field service, in lieu of vocational training. Cooperative work crew skills, as work is performed at field locations. Proficient in basic arithmetic operations, including decimals and fractions, and able to use formulas, blueprints, specifications, and tables. Skilled in using various precision measuring instruments. Familiarity with hand tools. Capable of operating overhead cranes and fork trucks. Proficient in Microsoft Office (Word, Excel, Outlook) and able to learn new software programs, such as Oracle for purchase requisitions. Previous experience in millwright, carpentry, welding, electrical, or HVAC roles preferred. Knowledgeable in Asbestos abatement and lead awareness training preferred. Possess a valid driver's license for travel to customer sites. Must be able to pass requirements to gain unescorted access to a nuclear facility. Must be able to work without restriction throughout U.S, Canada, and Mexico. Physical Requirements (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.) The employee must be able to lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision and Ability to adjust focus. While performing the duties of this job, the employee is regularly required to stand; walk; and use hands to finger, handle, or feel. The employee frequently is required to talk or hear. The employee is occasionally required to sit; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. Work Environment While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, fumes, or airborne particles, and toxic or caustic chemicals. The employee is occasionally exposed to work in high, precarious places, and risk of shock. The employee is occasionally exposed to extreme heat, extreme cold and wet, humid conditions. The noise level in the work environment is frequently loud. Additional Info Toshiba employees enjoy a comprehensive compensation and benefit package including an annual bonus, a generous 401k match, health, and wellness programs as well as generous t ime off. Toshiba is an Equal Opportunity Employer.

Do you love to travel? Passionate about serving as a brand ambassador? Feel fulfilled by solving technical challenges? Our field service team specializes in keeping our machine performance strong. Our team is dedicated to staying calm while acting quickly, finding solutions, and exceeding customer expectations. We offer rewarding, challenging opportunities throughout the world, across multiple packaging segments. If you are energized by providing best-in-class customer experiences and strive for advanced technical skills, we want to talk to you. Do we have your attention? Keep reading. TechniBlend is looking for a self-starter, ambitious Field Service Technician to deliver world-class technical customer service and support. This person will work directly within the Technical Service Group and manage multiple customers and projects. Service Technicians frequently correspond with customers; maintain oversight on equipment, service machinery, and travel to customer facilities. The goal is to drive service success that improves customer satisfaction, maximizes customer retention and increases profitability. Are you passionate about this work? • Support TechniBlend (OEM) equipment and systems at customer production facilities. • Diagnose and troubleshoot mechanical, electrical and controls technical errors with equipment and determine and execute proper solutions. • Remotely monitor the effectiveness and performance of equipment via remote access software and direct communication with customers. • Conduct testing and commissioning of control systems, ensuring functionality, reliability, and safety. • Perform modifications, upgrades, and routine maintenance to existing equipment to meet customer needs and requirements. • Provide best-in-class service with customers and collaborate professionally fellow technical service and engineering personnel. • Provide training to the customers on equipment operations and maintenance procedures. • Produce timely, accurate and detailed service reports. • Comprehend customer requirements and make appropriate recommendations and modifications as required. • Manage field service appointments and customer troubleshooting requests through Salesforce - Field Service Lightning. • Ability to manage travel and expenses through expense management software while following company policies. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! If this sounds like you, we want to connect! • Proven field service and technical service experience and aptitude • Ability to troubleshoot, test, repair and service technical equipment • Ability to work flexible shifts and adapt to changing work schedules • Willingness to travel up to 70% of the time (primarily domestic / USA) • Ability to work extended hours and weekends • Able to effectively organize, schedule, and carry out work assignments with minimal supervision • Read and interpret technical manuals, blueprints, diagrams • Understanding of the safe operation of hand tools and power equipment • Effective communication skills, verbal as well as written • Well-developed skills in problem solving and troubleshooting • Broad technical knowledge of process and/or industrial automation • Mechanical aptitude and ability to perform mechanical and physical tasks • Ability to support customers during and after hours on a scheduled basis ADDITIONAL SKILLS: • Brewing, Food & Beverage processing equipment experience a plus • Ambitious, fun & flexible • Organized, with strong time management skills and a strong work ethic • Technical curiosity is critical • High attention to detail EDUCATION AND EXPERIENCE: • Requesting (not required) 3 to 5 years of experience in installation, industrial maintenance, and troubleshooting of processing systems preferred. • Associates or technical degree in engineering or related field required. - Prefer higher level education in engineering, electronics, programming, etc. • Proficient knowledge of mechanical, electrical and process systems used in the brewing, food & beverage production industry. • Experience with various control systems and PLCs (Programmable Logic Controllers), especially Rockwell Automation / Allen-Bradley systems. • Experience with mechanical process equipment such as pumps, valves, meters and other components. • Computer knowledge: Microsoft Office, Excel and Word, Salesforce, Syteline Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #TEC #INTEC

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

Searching for a Field Service Technician to join our Waukegan, IL team! Responsible for planning and coordinating site activities including erection, startup, training and troubleshooting to ensure that equipment is installed and operated in accordance with contract design drawings and operating instructions. This role requires 100% travel All candidates must be legally authorized to work in the US and will not require current or future sponsorship. Responsibilities: Performs Field Service activities for erection to ensure that systems are installed in accordance with design drawings. Performs Field Service activities for component testing and system startup to ensure that systems are commissioned and performing in accordance with contract design drawings and operating instructions. Provides maintenance, troubleshooting, and operational support on existing installations. Documents field activities, observations and recommendations. Submits weekly expense reports and timesheets as directed. Performs special projects, customer training and routine service visits and miscellaneous job-related duties as assigned. All other duties as assigned. Education and Experience: High School Degree or higher is preferred. 1 5 years as Field Service Technician or comparable experience. Demonstrated knowledge of basic technical theories, practices, drawings and methods. Experience working in a power or an industrial plant or similar environment. Willing to travel 100% of the time.

Title: Diesel Mechanic KAG is North America's largest tank truck transporter and logistics provider, delivering energy commodities, specialty products, merchant gases and food products across the United States, Canada and Mexico. Our dedicated team of Diesel Mechanics is an essential function of our business, and we are looking to hire talent to lead the way to success! Starting hourly rate ranges from $21 to $45. Please note: The hourly hiring rate will vary based on a number of factors: skill level and experience of the applicant, geographic location, and business needs. By applying, candidates acknowledge these terms. Hours: Alternating Monday through Thursday/ Tuesday through Friday from 2p-midnight Relocation: Reimbursement Available KAG is now seeking to hire all levels of Diesel Mechanics - Apprentice, Levels I, II, III, and HM183 certified! Here are some of the benefits of joining our company: Opportunities for growth with extensive onsite paid training Guaranteed Pay Increases with completion of training programs and verified prior experience $100Boot Allowance paid in quarterly installments $250 Semi-Annual Tool Allowance after one year of service (up to $500 Annually) Benefits Available (Medical/Dental/Vision/401K Match) Paid Vacation and Holidays Diesel Mechanic Position Summary: This position is required to safely and accurately perform general property and vehicle maintenance & repair duties in and around the shop operations in a fast-paced environment. Knowledge and understanding basic preventative maintenance and repair techniques of Class 5 through Class 8 commercial vehicles to include tank trailer inspection and maintenance related to the Federal Motor Carrier Safety Administration (FMCSA) regulations is required. Diesel Mechanic Essential Functions: All fleet mechanic positions will be required to perform vehicle maintenance & repair duties safely and accurately in and around the shop operations in a fast-paced environment. Fleet Mechanic Apprentices will receive hands on training and instruction on preventive maintenance/inspections/repairs of Class 5 through Class 8 Commercial Vehicles and maintenance/inspection of tank trailers. Fleet Mechanic Levels I & II will learn and become proficient utilizing the company's maintenance software program to create and complete work orders and maintain work order/vehicle maintenance records. They will also train/assist other technicians in performing preventive/repair of facilities and equipment to include trucks, tractors, and trailers. Fleet Mechanic Level III will build on the duties from Diesel Mechanic I/II and become qualified as necessary with appropriate certifications to perform new technology evaluations, diagnosis, and repairs. HM183 will build on the duties of a Level III Diesel Mechanic, Certified as a (DOT) commercial motor vehicle inspector in compliance with FMCSR's Has been signing test forms as the Registered Inspector for at least 3 years. Pay Range: - , General Benefits: Requirements for Fleet Mechanic Level I, II, and III Positions: Valid Driver's License Minimum 1 - 5 years of experience in heavy-duty vehicle maintenance/repair (Tech levels will be determined by years of experience and certifications) Holds a current Air Brake Certification in compliance with FMSCR 396.25 or has at least 1 year of verifiable experience with the ability to obtain Air Brake Certification through KAG EPA 609 certification (Motor Vehicle Air Conditioning Repair) or the ability to obtain certification through KAG Requirements for HM183 Positions: Valid Driver's License Verifiable proof of 3-year tank testing commercial motor vehicle inspector in compliance with FMSCR or has at least 1 year of verifiable experience under a qualified inspector with the ability to obtain (DOT) commercial motor vehicle inspector certification through KAG Physical Requirements: LIFTING REQUIREMENTS: Frequently lifting up to 50 pounds. Anything over 50 pounds is lifted with assistance. Kenan Advantage Group, Inc. is an equal opportunity employer. No person will be discriminated against in any aspect of their employment on the basis of any status or characteristic protected by applicable federal, state or local law Note: The above statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities and skills required of associates so classified. Management retains the right to assign or reassign duties at any time. Job description is subject to change. All employees of the Company are expected to: Promote positive work habits including effective and timely communication, teamwork and respect for co-workers. Provide constructive guidance to other employees and representatives of third parties. Contribute to providing the highest quality of products and services to customers #TechHOT

Our large financial/banking client is currently seeking a Datacenter Technician This is a contract to hire role that must be done onsite on in the southwest Racine area W2 only, no C2C or third parties. This job will have the following responsibilities: Coordinate with Data Center and Field Site teams, Facilities, and contractors to successfully execute structured cabling builds Work with design team to develop timely project specific specification and scope documentation, including floor plans, pathway and rack layouts, rack elevations, cable schedules, and bill of materials for all ISP and OSP cabling Coordinate infrastructure technologies (AV, Network, Voice, IP security systems) for Enterprise Facilities driven projects Collaborate with internal stakeholders to deliver designs, meeting capacity and network requirements and go-live timelines Qualifications & Requirements: Experience designing, deploying and maintaining complex data center environments (new facility, major facility renovations/expansions) Understanding of indoor/outdoor cable plants, including copper cabling, long range/short range fiber optic cabling Knowledge of information technology infrastructure components (LAN/WAN/SAN, firewalls, Wintel/Lintel/UNIX servers, storage, roll-on equipment, wireless, DAS) Data center and/or networking industry certifications preferred

Pls look for junior profiles Exp: 5-10 Years About Job role - A Smart Hands Support technician, also referred to as a Data Center Smart Hands technician, provides on-site technical support for IT infrastructure within data centers or colocation facilities. Acting as the on-site representative for remote IT teams, this position performs tasks requiring physical presence and technical proficiency beyond basic remote support. The Smart Hands Network and Telecom Technician offers on-site support for network and telecommunications infrastructure, executing installation, maintenance, troubleshooting, and configuration duties for network and telecom equipment in data centers or client locations while maintaining operational standards, timely issue resolution, and accurate documentation. Key responsibilities Hardware Management: Installing, configuring, replacing, and decommissioning servers, switches, routers, and other equipment within data center racks. Remote Team Collaboration: Coordinating with remote engineering teams and stakeholders to implement configurations and resolve issues. Documentation & Reporting: Documenting activities, maintaining service logs, and updating remote teams or project managers. Inventory & Auditing: Assisting with asset management through physical audits, labeling, tracking, and monitoring inventory. Emergency Response: Responding to emergencies and participating in on-call rotations as needed. Safety & Compliance: Following safety protocols and adhering to operational procedures and change management policies. Network Hardware Management: Includes racking, stacking, installing, configuring, replacing, and decommissioning network equipment such as switches, routers, firewalls, and servers. Telecom Infrastructure Support: Supporting telephony hardware and applications (analog, ISDN, SIP, etc.), installing and relocating telecom assets, and performing equipment testing and troubleshooting. Cabling and Connectivity: Managing, installing, and tracing network and power cables, ensuring organization, labeling, and testing of connectivity. Troubleshooting and Diagnostics: Addressing physical connectivity issues, diagnosing hardware, software, and network problems, and conducting power cycles and signal testing. Maintenance and Repairs: Performing routine maintenance, hardware upgrades, emergency repairs, assisting with system updates, and replacing faulty components. Qualifications Education: High school diploma or GED required; technical school training or relevant experience preferred; certifications such as CompTIA Network+ or CCNA are beneficial. Experience: Minimum of 2 years in network/telecom support, field service, or data center operations preferred; experience with OEM network devices and fiber optic cabling is an asset. Technical Skills: Knowledge of networking concepts (OSI Layers 2 & 3), protocols (TCP/IP), cabling, data center operations, and basic telecom systems; ability to interpret technical diagrams, use hand tools, and familiarity with remote access tools and ticketing systems. Soft Skills: Proficient troubleshooting, problem-solving, communication (written and verbal), attention to detail, time management, organizational abilities, and capacity to work both independently and collaboratively; customer service skills required. Physical Requirements: Able to lift up to 50 pounds, climb ladders, work in confined spaces, and perform physically demanding tasks. Availability: Flexible to work various shifts, participate in on-call rotations, and travel reliably to client sites when required using own vehicle.

Job Description Join a Company That Puts People First At Wenger Construction, Inc., we're more than a roofing and siding company - we're a family-owned team that believes in doing things the right way. Since 1997, we've built our reputation on quality, teamwork, and taking care of our people. We live by our four core values every day: Hungry - Driven to learn and grow Collaborate - Work together to win Elevate - Always raise the bar Own It - Take responsibility and pride in your work If you enjoy working with your hands, solving challenges, and being part of a crew that builds things that last - we'd love to have you on our team About the Role Wenger Construction is expanding our Service Division and looking for a skilled and motivated Lead Service Technician to join our team. Our service department is dedicated solely to repairs and small projects, providing fast, reliable solutions and exceptional customer service. As a Lead Service Technician, you'll oversee a two-person crew, perform inspections and repairs, and help deliver the World-Class Customer Experience Wenger is known for. Our service teams specialize in commercial roofing, siding, and sheet metal - diagnosing issues, troubleshooting building deficiencies, and ensuring every repair meets our high standards for quality and safety. Key Responsibilities · Perform inspections, repairs, and maintenance on commercial roofing, siding, and sheet metal systems. · Safely operate hand and power tools to repair or replace materials as needed. · Diagnose leaks and troubleshoot building deficiencies efficiently and accurately. · Read and interpret blueprints and specifications to ensure proper repair execution. · Collaborate with your crew and project managers to complete work efficiently and safely. · Maintain safety standards and follow proper procedures while working at heights and on active job sites. · Ensure all tools, materials, and equipment are used and maintained properly. · Represent Wenger Construction with professionalism and excellent customer communication. PREFERRED QUALIFICATION · Minimum 2 years of construction experience required. · Commercial flat roofing, siding, or sheet metal experience preferred (training provided for the right candidate). · Proficiency with hand and power tools used in roofing and construction. · Ability to read blueprints and perform basic estimating. · Strong understanding of roofing systems and construction processes. · Experience in carpentry or sheet metal fabrication is a plus. · Valid driver's license required; ability to travel to job sites throughout Wisconsin. · Capable of heavy lifting and working in outdoor environments. · Positive attitude, strong work ethic, and commitment to safety. OTHER REQUIREMENTS Must be able to pass pre-employment screenings (background check, drug screen, and motor vehicle report). Why You'll Love Working Here We believe good workers deserve great opportunities. When you join Wenger, you join a culture that values growth, hard work, and collaboration. • Family-Oriented Culture with Year-Round Work • Competitive Pay (based on experience) • Health Insurance - 50% of premiums paid by Wenger • Dental and Vision Benefits • Vacation and Paid Time Off (PTO) • Holiday Pay • 401(k) with Company Match • Opportunity for Quarterly Efficiency Bonus • $15K Life Insurance • Boot Reimbursement • Partnership with Aflac (Including Company Paid Accidental Insurance) • Performance and Compensation Reviews at 60 days, 6 months, and 1 year • Training, Development & Professional Growth Opportunities • Weekly Paychecks and Direct Deposit Apply today and join a team where hard work is recognized and people matter.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $23.08 - 32.69 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** #LI - AD2 #TechnicalHiring Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job DescriptionBenefits: Competitive salary Free uniforms Training & development Lead Home Service Technician TruBlue Home Service Ally of Kenosha, WI Are you a skilled and experienced handyman or handywoman looking for a fulfilling role with a company that values your expertise and commitment? At TruBlue Home Service Ally of Kenosha, we are dedicated to providing premium handyman services that give our customers peace of mind. Our bonded and insured technicians help homeowners maintain the safety, value, and comfort of their homes through exceptional service, home assessments, and regular maintenance. We are seeking a Lead Home Technician (Handyman/Handywoman) with 10+ years of paid experience in general carpentry, handyman work, and home repairs to join our growing team. What You'll Do As a Lead Home Technician, youll use your expertise to: Perform bathroom upgrades and remodels Handle drywall repairs, patching, and caulking Complete flooring repairs and installations Execute general carpentry and home repairs Conduct kitchen repairs and remodels Address minor plumbing and electrical needs Provide interior and exterior painting What We Value At TruBlue, our values are the foundation of our success: FAMILY: Our work is driven by the people we care forour customers, team members, and community. We strive to create a family atmosphere in everything we do. INTEGRITY: We treat everyone with respect and ensure every voice is heard. TRUST: Our reliability and credibility are key to building lasting relationships. QUALITY: We take pride in our work, delivering value and an exceptional customer experience every time. What We're Looking For The ideal candidate is a seasoned professional who: Has a proven ability to handle a variety of home repairs, maintenance, and remodeling tasks. Owns a valid drivers license and has a reliable vehicle. Possesses standard tools for the job. Speaks fluent English and is a legal U.S. citizen. Is dependable, detail-oriented, and passionate about quality craftsmanship. Why Join TruBlue? Family-Oriented Culture: Be part of a team that values you and your contributions. Reliable Workload: Enjoy consistent jobs and a steady income. Growth Opportunities: Develop your skills and advance your career with us. We are actively interviewing for this position. If youre ready to bring your skills to a company that values integrity, trust, and quality, we want to hear from you! Apply Today Take the next step in your careerapply now, and our hiring manager will be in touch.

Job Description National Technologies (NTI), a Network Connex Company, is a premier turnkey installer of fiber optic and data center infrastructure. Working on our team puts you on the leading edge of innovation in the digital communications space. If being a part of a tight-knit organization that operates in some of the most advanced technology environments around the world sounds like a dream job, NTI might be the right fit for you! With the perks of a large organization, NTI remains true to its roots as a home-grown company with an open door culture that welcomes new ideas and encourages professional growth. We set you on the right path with careful onboarding and thorough training programs that prepare you for success in your role and beyond. Position Overview: NTI is seeking a Traveling Foreman with will lead a team, ensuring projects are completed safely, on time, and to customer quality standards while performing advanced fiber optic splicing and testing tasks. This role requires national travel to various project sites and combines leadership, project management, and technical expertise in fiber optic infrastructure. Key Responsibilities: Ensure project safety, quality, schedule, and cost compliance with company/client standards. Lead 2-3 crew members, optimizing skills and equipment use. Act as primary liaison between Project Manager and crew. Interpret customer prints to plan tasks and schedule work. Hold daily pre-work meetings to align on goals and safety. Verify construction and splicing work meets standards. Complete phase-specific closeout documentation. Document job progress with photos. Maintain company equipment (vehicles, trailers, test tools). Perform precise fusion and mid-sheath splicing on high-count fiber cables (864ct, 1728ct, 3456ct). Conduct live fiber splicing during maintenance windows to minimize disruptions. Install fiber optic cables in various environments (underground, aerial, indoor). Execute OTDR/OLTS testing to assess cable performance. Troubleshoot and resolve live network fiber issues. Produce FastReporter reports for test and splicing documentation. Operate Fujikura splicers and EXFO testers for low-loss splices and diagnostics. Pull fiber cables through conduits/ducts for installations. Support cabinet bolting and basket tray installation (preferred). Safely operate scissor lifts for elevated work (preferred). Comply with OSHA, IBEW Local, and NTI safety standards Maintain a clean workspace and follow proper handling procedures for fiber optic materials and equipment. Work Schedule and Environment Work indoors and outdoors in various weather conditions, adapting to project requirements. Perform tasks during daytime and occasional nighttime maintenance windows as required by client schedules. Stand for extended periods (8-10 hours per day) and perform physically demanding tasks, including lifting and carrying up to 50 pounds. xperience and Education 5+ years of experience in the telecommunications industry with related experience in construction and tower work. 2-3 years of verifiable experience splicing and testing fiber optic cables for dark fiber providers (e.g., Zayo), meeting stringent quality and performance standards. 3+ years of hands-on experience using Fujikura fusion splicing machines for high-count fiber splicing (864ct, 1728ct, 3456ct). 3+ years of experience performing OTDR and OLTS testing with EXFO testing equipment. 2+ years of experience producing FastReporter reports for network documentation. Qualifications & Skills Proven ability to perform mid-sheath (ring-cut) splicing and live fiber network splicing with minimal service disruption. Strong troubleshooting skills for diagnosing and resolving issues on live/active network fiber. Familiarity with cable pulling, cabinet bolting, basket tray installation, and scissor lift operation (preferred). Strong written and oral communication skills for effective team and client interactions. Proficiency in Microsoft Office (Excel, Word, Outlook) for documentation and reporting. Strong interpersonal skills and a strong work ethic. Ability to pass a clean background check and drug screen. Valid driver's license required. Fluency in English for effective communication. Certification in fiber optic splicing or testing (e.g., FOA CFOT, BICSI, or equivalent) preferred. Prior experience with major telecommunications carriers or dark fiber providers beyond Zayo preferred. Familiarity with additional fiber optic testing tools or software beyond EXFO and FastReporter preferred. Union Affiliation: This is a union position under IBEW Local requiring adherence to union agreements, policies, and benefits structures. Benefits: Competitive union wages and benefits package through IBEW Local 640, including health insurance, retirement plans, and paid time off. Opportunities for professional development and training in advanced fiber optic technologies. Access to a supportive union environment with representation and advocacy. Collaborative and safety-focused work culture at NTI. Pay rates may vary based on skills, background, experience and specific location. NTI provides a comprehensive benefits package including health, dental, vision, life, and disability insurance and retirement savings options. For Union employees, pay rates and benefit levels are determined by union classifications which are set by the union. National Technologies (NTI) believes all persons are entitled to equal employment opportunities and does not discriminate against employees or job applicants because of race, color, gender, affectional or sexual orientation, domestic partnership status, ancestry, religion, national origin, citizenship status, marital status, disability, veteran status, age or any other protected group status. Upon acceptance of an offer, all candidates will be required to pass a background check and drug screening.

Dürr CTS (Clean Technology Systems) develops advanced environmental technologies to make industrial production cleaner, safer, and more efficient. Across all our product lines, Dürr CTS offers responsive, local, and skilled service teams, delivering customer-focused support in maintenance, troubleshooting, spare parts, and plant modifications. Since November 1st, 2025, Dürr CTS has operated independently, with 1,300 employees across 12 countries. We provide reliable and innovative environmental technology solutions, helping customers worldwide meet their regulatory and sustainability goals. Our Portfolio Includes: Air Pollution Control: thermal oxidation, sorptive processes, particulate matter separation Noise Abatement: Silencer products, filtration, gas turbine inlet and exhaust systems by Dürr Universal Decentral Power Generation: Organic Rankine Cycle systems with Cyplan ORC We serve a wide range of industries, including chemical, pharmaceutical, food, automotive, energy, surface coating, and many more, providing tailored solutions that help customers meet environmental regulations, reduce emissions, ensure operational reliability, and improve sustainability. We're Looking for People Who: Can be the face of our company to our customers Love to travel and experience new work environments Enjoy navigating challenges that require you to think on your feet Have a high mechanical aptitude Crave personal development and improvement What We Do: Durr Universal provides noise and environmental solutions to our customers. For more than 65 years, we have supported our customers through our design, manufacturing, and installation of acoustic and emissions systems. We work to continually improve our knowledge of our equipment, our customers' processes, and how the two interact. Why We're in Business: Durr Universal provides value-added solutions to our customers. We pride ourselves on the thoroughness of our pre-sale consultation and solution development, the quality and longevity of our equipment, and our best-in-class service from initial customer inquiry through the life of the equipment. We seek long-term partnerships with customers that value our approach. This position will oversee all activities of both Durr Universal internal and Field Service contractors and report on the performance of the department functions with appropriate personnel in the company. This position will require working with the Field Service Technicians, Project Managers, Sales, Engineering, 3rd party Contractors, and site customers to ensure overall contract requirements are successfully met for field service work, warranty repair, quality inspection, and technical supervision. This position requires travel from 70% to 90% to various potential customer sites to assist in quoting, supervision, auditing, inspection, etc. of dedicated Field Service Teams, along with assisting and overseeing field service project work scopes and related scopes. The Field Service Supervisor/TFA must plan, organize, direct, and manage the work of individual field service technicians and contractors in various field operations. Essential Functions: Put safety first in everything you do and help ensure our colleagues, customers, and business partners remain safe at all times. Be the liaison between the customer, contractor, and Dürr staff Assist in the installation of Dürr and other equipment Manage all 3rd party subcontractors, ensure work is done safely, properly, and on time and in budget. Work with site personnel and internal personnel on project issues and resolve them effectively. Develop cost estimates and customer proposals for field installation projects. Creation and deployment of mobilization schedules for the field service department. Assist in equipment commissioning and documentation as required Participate in contract reviews and kick-off meetings involving the field service scope of work. Assist with parts procurement as needed When required provide customer training on installed equipment Provide equipment modular build support as required Experience and Skills: Must make safety a priority every day AWS Certified Welding Inspector (CWI) is a plus Painting and coatings certification/ experience is a plus OSHA 10 or 30 Hour Safety Trained Familiar with MS Word, Excel, and PowerPoint Desire to travel Ability to read and interpret engineering drawings and technical documents (i.e. layout, sectional drawings) Excellent written and verbal communication skills Desire to work hands-on in an industrial environment Proven mechanical aptitude - including the use of various machining tools, welding equipment and methods, and various testing equipment Demonstrated experience with installation and inspection of large steel structures (ducting and tall stacks, steel platforms) and their welding processes, inspection of welds, and industrial coatings Working experience with safe lifting & rigging methods Fully capable with Microsoft Office software package Flexible to adapt to same-day and next-day changes Ideal candidate will have experience developing RFQ/RFPs for work that would be subcontracted to 3rd party vendors. Experience with steel fabrication and custom equipment manufacturing. Position can be located anywhere near a major airport Dürr CTS, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. We maintain a drug-free workplace and perform pre-employment drug and alcohol testing. Note to all Staffing Agencies: Dürr CTS, Inc. has a team of dedicated Human Resources professionals who are responsible for all hiring needs. Our practice is to partner and work with our approved vendors on an as-needed basis. We do not accept resumes from agencies that are not on our preferred vendor list and have not signed our Recruiting and Permanent Placement Contract. Any resumes submitted from unapproved vendors will be considered unsolicited, and Dürr will not be obligated to pay a referral fee.

A leader in the technology world is looking for multiple Sr Datacenter Engineers to help with cabling projects in the Milwaukee area. In this role you will be working in a team environment to help build out new and existing datacenters on a project basis. The right candidate will have at least a year of experience working in a datacenter and be familiar with various types of hardware and network devices. You will be responsible for cable labeling, installation/patching and management. This position offers the chance to work for one of the most elite names in the Technology space with the potential for a full-time opportunity. The following experience will ensure you are a good match: 1+ year working in a Datacenter Experience labeling, managing and cabling network devices Ability to work on your own with Management direction