General Maintenance Mechanic jobs at Lockheed Martin - 1676 jobs

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the "desired" qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What's needed to succeed: Twenty Four months experience required in at least three of the following areas: Electrical (including 480 volt, 3 phase) Structural (including steel frame construction) HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation. The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications What's needed to succeed: HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact ...@united.com to request accommodation.

Senior Maintenance Technician (HVAC Certified) 📍 Greater Los Angeles & Inland Empire Areas 🏢 Portfolio: Office, Industrial, & Retail Properties We're hiring a highly skilled Senior Maintenance Technician (HVAC certified) to lead HVAC and building maintenance across a diverse commercial portfolio. This hands-on leadership role ensures safe, efficient, and reliable building operations while supporting maintenance staff, coordinating vendors, and driving preventive maintenance programs. What You'll Do Perform advanced troubleshooting, repair, and maintenance on commercial HVAC systems Maintain and service mechanical, electrical, and plumbing (MEP) systems across multiple properties Oversee and execute preventive maintenance programs, equipment logs, and safety protocols Monitor building systems, diagnose issues quickly, and implement corrective actions to reduce downtime Support and refine building energy management processes to improve efficiency and sustainability Create and maintain inventory of supplies, materials, tools, and equipment for each property Schedule, direct, and mentor maintenance staff; provide hands-on training and quality control Coordinate and supervise third-party vendors to ensure scope, timeline, and budget compliance Assist with annual operating budgets and long-term capital expenditure planning Track maintenance expenses and help forecast equipment replacement schedules Ensure compliance with OSHA, CAL/OSHA, local codes, and internal safety standards Maintain documentation such as inspection reports, maintenance logs, and regulatory certificates Participate in special projects, building improvements, and construction-related coordination Provide excellent customer service to tenants, internal teams, and property management Respond to emergency maintenance situations as needed What We're Looking For HVAC Certification + EPA 608 Universal (required) 5-7 years of commercial building maintenance experience Strong HVAC, mechanical, electrical, and plumbing troubleshooting skills Experience supervising maintenance teams and coordinating vendors Ability to read and interpret blueprints, schematics, and technical manuals Strong communication, organization, and problem-solving abilities Proficiency in Word, Excel, Outlook; Yardi or MRI experience preferred Valid CA Driver's License; OSHA, CPR/First Aid, electrical or plumbing certifications a plus What We Offer Competitive compensation and benefits based on experience Mileage reimbursement or vehicle allowance Professional certification reimbursement Growth opportunities within a dynamic and expanding portfolio

City Rochester, Webster State/Province New York Country United States Department FACILITIES & MAINTENANCE Date Tuesday, August 5, 2025 Working time Full-time Ref# 20036086 Job Level Individual Contributor Job Type Experienced Job Field FACILITIES & MAINTENANCE Seniority Level Associate Currency USD - United States - US Annual Base Salary Minimum 67,808 Annual Base Salary Maximum 67,808

AHEAD builds platforms for digital business. By weaving together advances in cloud infrastructure, automation and analytics, and software delivery, we help enterprises deliver on the promise of digital transformation. At AHEAD, we prioritize creating a culture of belonging, where all perspectives and voices are represented, valued, respected, and heard. We create spaces to empower everyone to speak up, make change, and drive the culture at AHEAD. We are an equal opportunity employer, and do not discriminate based on an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. We embrace all candidates that will contribute to the diversification and enrichment of ideas and perspectives at AHEAD. The Maintenance Renewal Specialist (MRS) is responsible for assisting Client Operations Specialists (COSs) and Client Directors (CDs) in requesting and pricing maintenance renewals across all technologies, with a specialized knowledge of the Cisco SMARTnet renewal process. MRS develops and maintains strong pre and post-sales contact with maintenance vendors in order to facilitate positive and productive long-term relationships. Quickly resolves issues/problems through independent thinking and by making judgment calls based on interactions/experience with maintenance vendors. Responsibilities: Can easily create and validate quotes in CCW-R, work in PXP, open cases in CS Hub, and has an in-depth understanding of the Cisco SMARTnet renewal process Comfortable quoting complex renewals and leveraging industry knowledge to maximize margin when in a competitive situation Manage transaction lifecycle from quote to cash - identify account requests and coordinate/ manage internal support team resources to ensure customer satisfaction Work independently with maintenance vendors to address questions/issues and provide timely solutions; engage with internal/external support team on resolution Assist in structuring deals with Account Managers. Prepare customer pricing and proposals for maintenance renewals using the parameters set by assigned Account Managers Work to develop vendor relationships in order to gain improved communication, increased discounts, and fast turnaround on registration/special pricing requests Provide 'value-add' services to maintenance customers as requested (SN# swap, site/address change, maintenance schedules, contract summary reports.) Receive, track, and import renewal data into renewal database Error check completed renewals Proactively quote upcoming renewals and provide accurate visibility into current quarters renewal opportunities Qualifications: Bachelor's degree is preferred or equivalent experience 3-5 years of Maintenance Support preferred - in the Technology Industry is preferred Open to various backgrounds Ability to understand/analyze client needs and link them to company offerings Independent self-starter, effective team player with creative problem solving skills to help the organization achieve its earnings objectives History of working in a high volume, fast-paced sales environment required Strong verbal and written communication skills; ability to articulate needs and also understands Cisco's acronyms Ability to instantly build rapport Strong interpersonal skills to effectively interact with all levels of internal and external clients Organizational skills Time management ability Adaptable/Ability to react to situations Ability to work independently on projects with minimal supervision Work effectively and efficiently under pressure Understands general business principles Strong mathematical aptitude and the ability to work with and easily calculate margin percentages using cost+, list-, and flat GPM% models Experience with Salesforce or other CRM preferred Outstanding multitasking skills Desire to learn and understand the business process from beginning to end Strong work ethic with respect for work/life balance and positive work environment Good people skills and strong backbone to stand firm in sales-centric environment Positive can do attitude Why AHEAD: Through our daily work and internal groups like Moving Women AHEAD and RISE AHEAD, we value and benefit from diversity of people, ideas, experience, and everything in between. We fuel growth by stacking our office with top-notch technologies in a multi-million-dollar lab, by encouraging cross department training and development, sponsoring certifications and credentials for continued learning. USA Employment Benefits include: - Medical, Dental, and Vision Insurance - 401(k) - Paid company holidays - Paid time off - Paid parental and caregiver leave - Plus more! See benefits for additional details. The compensation range indicated in this posting reflects the On-Target Earnings ("OTE") for this role, which includes a base salary and any applicable target bonus amount. This OTE range may vary based on the candidate's relevant experience, qualifications, and geographic location.

Tunista Logistics Solutions LLCRegular PRIMARY FUNCTION Maintains the roads and grounds at Gila Bend AFAF ESSENTIAL FUNCTIONS * Pick up trash and or debris daily around Gila Bend AFAF, operate gas powered equipment to maintain lawns, trees, Palm trees, and brush, (riding lawn mowers, weed eaters, hedge trimmers, chain saws, edger's, and etc.) remove weeds from rock and plant areas on base, patch asphalt roads, crack seal roads , and minor repairs to concrete walkways and drive ways. * Repair and or replace sprinklers, and PVC irrigation lines. * Other duties as assigned SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. KNOWLEDGE, SKILLS, & ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. QUALIFICATIONS: * High school diploma and or equivalent * Must have at least one plus years of prior grounds maintenance experience * Obtain and maintain a government security clearance PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Reporting to the Maintenance Director, the Maintenance Mechanic is responsible for maintaining, repairing, and performing preventive maintenance on manufacturing equipment and facility systems. This role also supports equipment upgrades and facility-related projects to ensure safe, efficient, and reliable operations. Responsibilities Conduct daily preventive maintenance and routine inspections on all equipment, making necessary mechanical adjustments Disassemble, clean, and reassemble equipment to ensure optimal mechanical performance Monitor and maintain preventive maintenance inventory and supplies Diagnose mechanical issues by observing and listening to equipment during operation Repair or replace defective components using hand and power tools Complete, document, and track work orders and assigned project tasks Read, interpret, and follow equipment manuals and technical documentation Perform all work in compliance with FDA, OSHA, SQF, NJDOH, and other regulatory requirements Maintain a clean, organized, and safe work environment in accordance with company policies Properly use required safety equipment and personal protective gear at all times Qualifications Previous experience as a Maintenance Mechanic in a manufacturing or industrial environment, including equipment repair and preventive maintenance Working knowledge of compliance standards including FDA, OSHA, SQF, and NJDOH Bilingual Spanish/English skills preferred

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company has an exciting opportunity, through our IAM/Boeing Joint Apprenticeship Program, for Flight Line Mechanic Apprentice in the Puget Sound region in Washington State! This comprehensive 4-year training program consists of 8,000 hours of paid on-the-job training and essential classroom education, designed to equip you with the skills needed to excel. The program begins with a 20% probationary period, allowing you to acclimate to the role while gaining valuable hands-on experience. You will attend school for at least 144 unpaid hours per school year (four hours each week), registered through a local Community and Technical College. Your wages as an apprentice will be defined in Article 17 of the Collective Bargaining Agreement between the International Association of Machinists District 751 and The Boeing Company, with progression to a higher wage step for every 1,000 hours of recorded on-the-job training until completion. Upon graduation, you will be placed in the target job at the maximum rate and receive a journey-worker certificate and card recognized worldwide. As a Flight Line Mechanic Apprentice, you will learn the skills to be essential in performing a variety of maintenance tasks on aircraft structures and systems, where attention to detail and adherence to safety protocols are paramount. You will learn to be responsible for troubleshooting and inspecting aircraft to ensure they are flight-ready, while meticulously documenting all processes to maintain compliance with industry regulations. A Color Vision Certification may be necessary for portions of this job. Your commitment to quality will be reflected in your ability to learn to conduct thorough audits and inspections, ensuring that all work meets stringent specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Application Instructions: To ensure your application is complete, all required assessments and courses must be finalized before submitting your application. Follow these guidelines: Documentation: At the time of the request, documentation for all course completions, test challenges, certificate and/or degree programs must be provided by the specified due date. Applicant Eligibility: Applicants must not have previously enrolled in or completed an IAM/Boeing Joint Apprenticeship program. Assessment and Course Completion: For English and/or math assessments, please include your assessment score and the corresponding course placement results (course number and title). Proficiency in math and English must be verified through one of the following: Completing Intermediate Algebra or a higher-level math course within the last 5 years. Completion of an English 90 course or assessment with a grade of C or better. Qualification for Blueprint Reading and Precision Measuring Tools: You can meet the qualifications through one of the following methods, which will be verified via your resume, work history, and transcripts: Vocational Courses: Basic Blueprint Reading or equivalent Basic Precision Measuring Tools or equivalent Basic Electricity or Basic Electronics Vocational Degrees and Certificates: Aviation Maintenance Technology Certificate Relevant Work Experience: A minimum of one year of work experience in a similar field, such as: Electronics (Assy., Repair) Certified A & P Mechanic Hydraulics (Installation, Repair) Operational Systems Trouble Shooting of Systems Software Applications Trouble Shooting Structures Mechanic Assembler Installer Assembler Electric Systems Aircraft Test Technician Fuel Cell Assy Position Responsibilities: Perform production installations, maintenance, preventative maintenance, and alterations on aircraft structures, systems, and sub-systems, including electrical and avionics, for both standard and experimental certificated aircraft. Troubleshoot, inspect, test, repair, and service aircraft and engine systems to prepare them for flight, documenting any nonconforming materials or components according to established specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes, performing quality functions such as customer/FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections. Utilize technical specifications, sketches, manuals, and FAA publications to complete work assignments effectively. Maintain company and FAA-required records and inspection forms while ensuring a safe, clean, and organized work environment. Plan and organize work packages to promote safe and efficient operations, meeting predetermined schedules. Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks. Interpret and adhere to airworthiness directives, service bulletins, and other approved data. Apply mathematical calculations to set up and use precision measuring tools for accurate measurements. Create production aids to facilitate work assignments as needed. Maintain necessary certifications, licenses, and permits for assigned work. Exchange information with suppliers, customers, or company representatives to explain or demonstrate operations and tests. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic qualifications/requirements: Experience doing jobs or tasks where you had to apply math skills such as algebra, geometry and/or trigonometry Experience reading engineering blueprints/drawings Experience with using electrical or electronic precision measuring tools and equipment such as multimeters, clamp meters, voltage testers, oscilloscopes Basic understanding Electricity/Electronics Proficiency in reading, writing, and speaking English. Education & Experience: High School Graduate or the equivalent. Proof of successful completion is required. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift Work Statement: This position is for shift 1; however, it may require some training on other shifts Other Relevant Information & Requirements: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $46.60/hour, with potential to earn up to $62.45/hour in accordance with the relevant collective bargaining agreement. Additional information Links: WebSite, Standards of Apprenticeship, Prep Pack. Applications for this position will be accepted until Jan. 30, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

The A&P Mechanic - G650 is responsible for performing high-level maintenance, inspections, troubleshooting, and repairs on the G650 aircraft. This position supports a VIP/ VVIP aviation environment that requires exceptional technical expertise, meticulous attention to detail, and the highest standards of safety, confidentiality, and professionalism. The ideal candidate has advanced experience with the G650 platform, knowledge of G650-specific systems and modifications, and the ability to maintain both airframe and cabin systems to meet elevated customer expectations. Key Responsibilities Aircraft Maintenance & Repair Perform scheduled and unscheduled maintenance on the G650, including A/B checks, cabin systems maintenance, and Gulfstream-specific modifications. Conduct inspections and repairs on high-end interiors, cabin management systems (CMS), entertainment systems, lighting, galley equipment, and VIP-customized installations. Execute component replacements, SB/AD compliance, structural repairs, and configuration-controlled cabin changes per BBJ documentation. Support AOG recovery and rapid-response troubleshooting in remote or international locations as needed. Regulatory Compliance & Documentation Ensure all maintenance actions comply with FAA regulations, company procedures, and Gulfstream-specific maintenance programs. Accurately document work performed in digital maintenance tracking systems and aircraft logbooks. Review and apply service bulletins. Coordinate with Quality Assurance for inspections, major repairs, and return-to-service authorization. Inspection, Diagnostics & Troubleshooting Perform detailed inspections of airframe, powerplant, avionics, and high-touch cabin systems unique to G650 configuration. Utilize advanced diagnostic equipment and built-in test systems (BITE) to identify and resolve discrepancies. Conduct borescope inspections on LEAP-1B engines, APU troubleshooting, and avionics system evaluations. VIP Cabin, Interior & Special Systems Support Maintain and repair VIP furnishings, luxury materials, cabinetry, and premium finishes. Troubleshoot and support Cabin Management Systems (CMS), satellite communications, Wi-Fi, Blu-ray/AV systems, and aircraft internet hardware. Work closely with flight crews and cabin staff to ensure the aircraft meets VVIP standards of comfort and functionality. Safety, Quality & Operational Excellence Uphold the highest levels of safety, confidentiality, and customer service expected in VIP aviation environments. Support continuous improvement of maintenance processes, reliability programs, and long-term fleet health monitoring. Maintain a clean, organized workspace and strictly follow OSHA, company, and regulatory safety protocols. Coordinate with operations, flight crew, engineering, and supply chain for aircraft readiness and mission reliability. Required Qualifications Valid FAA Airframe & Powerplant (A&P) Certificate. 3-5+ years of experience maintaining G650 platforms. Strong experience with: G650 interior and cabin systems Digital maintenance platforms (AMOS, TRAX, CMP, or equivalent) VIP cabin repairs, CMS systems, and premium interiors Ability to read and interpret data, manuals, engineering drawings, and wiring diagrams. Capable of working in high-standards VIP or corporate aviation environments. Must possess an active Secret (or TS/SCI) security clearance or be eligible to obtain one. Preferred Qualifications G650 Maintenance Training Certification. Prior experience with VVIP fleet operators, corporate aviation, charter, or government executive transport. FCC License, NCATT or avionics endorsements, or AET certifications. AOG experience with international travel capability. Strong understanding of cybersecurity and data sensitivity for VIP aircraft systems. This position does not offer relocation assistance; local candidates are preferred. Core Competencies Extreme attention to detail and craftsmanship High professionalism and discretion Strong troubleshooting and diagnostic capability Excellent communication and teamwork Ability to adapt in high-tempo VIP operations Customer-service mindset for VVIP standards

The A&P Mechanic - Boeing 737-MAX 8 BBJ is responsible for performing high-level maintenance, inspections, troubleshooting, and repairs on the Boeing Business Jet (BBJ) MAX 8 aircraft. This position supports a VIP/ VVIP aviation environment that requires exceptional technical expertise, meticulous attention to detail, and the highest standards of safety, confidentiality, and professionalism. The ideal candidate has advanced experience with the 737-MAX platform, knowledge of BBJ-specific systems and modifications, and the ability to maintain both airframe and cabin systems to meet elevated customer expectations. Key Responsibilities Aircraft Maintenance & Repair Perform scheduled and unscheduled maintenance on the 737-MAX 8 BBJ, including A/B checks, cabin systems maintenance, and BBJ-specific modifications. Troubleshoot and repair MAX-series systems, including advanced avionics, fly-by-wire spoiler systems, LEAP-1B engines, and modernized electrical architecture. Conduct inspections and repairs on high-end interiors, cabin management systems (CMS), entertainment systems, lighting, galley equipment, and VIP-customized installations. Execute component replacements, SB/AD compliance, structural repairs, and configuration-controlled cabin changes per BBJ documentation. Support AOG recovery and rapid-response troubleshooting in remote or international locations as needed. Regulatory Compliance & Documentation Ensure all maintenance actions comply with FAA regulations, company procedures, and BBJ-specific maintenance programs. Accurately document work performed in digital maintenance tracking systems and aircraft logbooks. Review and apply Boeing AMM, BBJ CMP, SRM, IPC, WDM, and service bulletins. Coordinate with Quality Assurance for inspections, major repairs, and return-to-service authorization. Inspection, Diagnostics & Troubleshooting Perform detailed inspections of airframe, powerplant, avionics, and high-touch cabin systems unique to BBJ configuration. Utilize advanced diagnostic equipment and built-in test systems (BITE) to identify and resolve MAX 8 discrepancies. Conduct borescope inspections on LEAP-1B engines, APU troubleshooting, and avionics system evaluations. VIP Cabin, Interior & Special Systems Support Maintain and repair VIP furnishings, luxury materials, cabinetry, and premium finishes. Troubleshoot and support Cabin Management Systems (CMS), satellite communications, Wi-Fi, Blu-ray/AV systems, and aircraft internet hardware. Work closely with flight crews and cabin staff to ensure the aircraft meets VVIP standards of comfort and functionality. Safety, Quality & Operational Excellence Uphold the highest levels of safety, confidentiality, and customer service expected in VIP aviation environments. Support continuous improvement of maintenance processes, reliability programs, and long-term fleet health monitoring. Maintain a clean, organized workspace and strictly follow OSHA, company, and regulatory safety protocols. Coordinate with operations, flight crew, engineering, and supply chain for aircraft readiness and mission reliability. Required Qualifications Valid FAA Airframe & Powerplant (A&P) Certificate. 3-5+ years of experience maintaining Boeing 737 platforms, ideally the MAX series. Strong experience with: Boeing Business Jet (BBJ) interior and cabin systems LEAP-1B engines and MAX-series avionics Digital maintenance platforms (AMOS, TRAX, CMP, or equivalent) VIP cabin repairs, CMS systems, and premium interiors Ability to read and interpret Boeing technical data, BBJ CMP manuals, engineering drawings, and wiring diagrams. Capable of working in high-standards VIP or corporate aviation environments. Must possess an active Secret (or TS/SCI) security clearance or be eligible to obtain one. Preferred Qualifications Boeing 737-MAX or BBJ GenFam / Maintenance Training Certification. Prior experience with VVIP fleet operators, corporate aviation, charter, or government executive transport. FCC License, NCATT or avionics endorsements, or AET certifications. AOG experience with international travel capability. Strong understanding of cybersecurity and data sensitivity for VIP aircraft systems. This position does not offer relocation assistance; local candidates are preferred. Core Competencies Extreme attention to detail and craftsmanship High professionalism and discretion Strong troubleshooting and diagnostic capability Excellent communication and teamwork Ability to adapt in high-tempo VIP operations Customer-service mindset for VVIP standards

Maintenance Supervisor - Second Shift Employment Type: Full-Time, Direct Hire Shift: Second Shift (2:00 PM - 11:00 PM) Salary: $75,000 - $90,000 annually + Overtime Eligible extra pay No sponsorship or visa transfers available No OPT/CPT/F1 visas please About the Role We are seeking a Maintenance Supervisor with a strong background in automation and excellent leadership skills. This role is responsible for organizing, planning, and directing maintenance activities to ensure maximum efficiency and minimal downtime. Key Responsibilities Supervise and coordinate maintenance team activities to maintain productivity and efficiency. Manage relationships with contractors, vendors, and suppliers. Enforce company policies and safety regulations. Review production schedules and allocate resources effectively. Troubleshoot and resolve maintenance and automation issues, including PLC systems. Maintain accurate records of equipment, repairs, and preventive maintenance programs. Ensure adequate inventory of parts and supplies to minimize downtime. Participate in continuous improvement initiatives and plant recycling programs. Support launch programs and recommend process improvements. Maintain plant security and housekeeping standards. Ensure compliance with ISO14001 and IATF16949 procedures. Directly supervise hourly maintenance technicians, including training, performance management, and disciplinary actions. Qualifications Education: Associate degree or higher (or equivalent experience). Experience: Minimum 2 years in maintenance supervision or related field. Strong automation background, including experience with PLCs (Control Logix, Micro Logix, Compact Logix, SLC 500 - Rockwell software). Ability to read ladder logic and make programming changes. Experience with automation equipment such as industrial robots, AGVs, and vision systems. Excellent communication and leadership skills. Ability to work rotating shifts and overtime as needed. Why Join Us? Competitive salary and overtime eligibility. Opportunity to lead a skilled team in a dynamic manufacturing environment. Be part of a company committed to continuous improvement and innovation.

A leading sleep technology company is seeking a mechanical/product design engineering leader in San Francisco. This role involves overseeing the development of complex electromechanical products and leading a team of engineers. Candidates must have over 10 years of experience in electromechanical systems and 2 years of management experience, with expertise in injection molding and electronics integration. This position offers significant responsibilities and collaboration with a high-performance team dedicated to innovation and excellence. #J-18808-Ljbffr

Maintenance Technician 2 IDR is seeking a Maintenance Technician 2 for one of our top clients in Pleasant Prairie, Wisconsin. If you are looking for an opportunity to join a large organization and work within an ever-growing team-oriented culture, please apply today! Responsibilities of the Maintenance Technician 2: Troubleshoot a variety of multi-craft equipment. Test electrical systems and continuation of circuits for wiring. Install, replace, and/or repair electrical wiring, switch boxes, conduits, light fixtures, etc. Ensure machines are lubricated properly to maintain functionality Assist in training and mentoring junior technicians as needed. Required Skills for the Maintenance Technician 2: 5+ years of professional experience in industrial manufacturing. Strong electrical/mechanical background. Strong ability to interpret OEM manuals, drawings, and schematics. Ability to read and interpret precision measuring devices. Familiar and comfortable with shop equipment like power tools, band saw, and drill presses. What's in it for you? Competitive compensation package Full Benefits; Medical, Vision, Dental, and more! Opportunity to get in with an industry leading organization Close-knit and team-oriented culture Why IDR? 25+ Years of Proven Industry Experience in 4 major markets ClearlyRated's Best of Staffing Client and Talent Award winner 11 years in a row

As a Maintenance Supervisor, your responsibilities will include: Supervising and coordinating maintenance technicians across all shifts, setting priorities and ensuring adequate coverage. Driving preventive and predictive maintenance programs to reduce downtime, control costs, and minimize equipment failures. Providing hands-on support on the floor (approx. 50% of the role), including weekend coverage as needed. Overseeing equipment reliability, facility upkeep, spare parts inventory, and vendor/contractor performance. Coaching and developing maintenance staff through technical training feedback, and performance evaluations to build skills and accountability. Ensuring compliance with food safety, workplace safety, and regulatory requirements while fostering a safe work environment. Leading Total Productive Maintenance (TPM) and equipment reliability initiatives to enhance efficiency and productivity Monitoring maintenance expenses, managing purchase orders, and providing accurate repair/cost estimates for business decisions. You'll bring value to the Maintenance Supervisor position and the team if you: Accountability: Own equipment, reliability and team performance. Attention to Detail: Ensure accuracy in work and documentation. Problem-Solving: Anticipate issues and apply effective solutions. Leadership: Communicate clearly, motivates, and develops the team. Decision-Making: Act confidently under pressure with sound judgment. Continuous Improvement: Promote TPM and preventive practices. Adaptability: Adjust quickly to changing priorities and demands. Qualified candidates will have: High school diploma or GED. At least 6 years of experience in a lead or supervisory maintenance role, preferably in a manufacturing environment. Demonstrated knowledge across multiple maintenance disciplines, including electrical systems, PLC automation, lubrication, and mechanical transmissions Proficiency in using CMMS (Computerized Maintenance Management Systems) and Microsoft Office (Outlook, Excel, Word, PowerPoint). Strong problem-solving skills with the ability to make accurate repair/replace decisions and deliver reliable cost and time estimates. What will set you apart: Associate's degree in mechanical, Chemical, or Electrical Engineering; or 4 years of relevant experience, as an equivalent. Technical or trade certifications a plus, especially HVAC certification. 6+ years of leadership experience in a food manufacturing environment. NFPA 70E certification (electrical safety in the workplace).

As a Maintenance Supervisor, your responsibilities will include: Supervising and coordinating maintenance technicians across all shifts, setting priorities and ensuring adequate coverage. Driving preventive and predictive maintenance programs to reduce downtime, control costs, and minimize equipment failures. Providing hands-on support on the floor (approx. 50% of the role), including weekend coverage as needed. Overseeing equipment reliability, facility upkeep, spare parts inventory, and vendor/contractor performance. Coaching and developing maintenance staff through technical training feedback, and performance evaluations to build skills and accountability. Ensuring compliance with food safety, workplace safety, and regulatory requirements while fostering a safe work environment. Leading Total Productive Maintenance (TPM) and equipment reliability initiatives to enhance efficiency and productivity Monitoring maintenance expenses, managing purchase orders, and providing accurate repair/cost estimates for business decisions. You'll bring value to the Maintenance Supervisor position and the team if you: Accountability: Own equipment, reliability and team performance. Attention to Detail: Ensure accuracy in work and documentation. Problem-Solving: Anticipate issues and apply effective solutions. Leadership: Communicate clearly, motivates, and develops the team. Decision-Making: Act confidently under pressure with sound judgment. Continuous Improvement: Promote TPM and preventive practices. Adaptability: Adjust quickly to changing priorities and demands. Qualified candidates will have: High school diploma or GED. At least 6 years of experience in a lead or supervisory maintenance role, preferably in a manufacturing environment. Demonstrated knowledge across multiple maintenance disciplines, including electrical systems, PLC automation, lubrication, and mechanical transmissions Proficiency in using CMMS (Computerized Maintenance Management Systems) and Microsoft Office (Outlook, Excel, Word, PowerPoint). Strong problem-solving skills with the ability to make accurate repair/replace decisions and deliver reliable cost and time estimates. What will set you apart: Associate's degree in mechanical, Chemical, or Electrical Engineering; or 4 years of relevant experience, as an equivalent. Technical or trade certifications a plus, especially HVAC certification. 6+ years of leadership experience in a food manufacturing environment. NFPA 70E certification (electrical safety in the workplace).

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Special Projects Mechanic to join our Joint and Installation team in the Puget Sound in Washington. As a Special Projects Mechanic, you will be at the forefront of innovation and precision in the aerospace industry. This dynamic role offers the opportunity to work on cutting-edge projects that push the boundaries of engineering and technology. You will engage in hands-on assembly and installation of complex systems, collaborating with a talented team of professionals dedicated to transforming visionary designs into reality. Your expertise will not only contribute to the successful completion of specialized projects but also play a vital part in shaping the future of aviation. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities Distribute and assign tasks to the assembly team based on production requirements, utilizing tools such as bar charts, flow charts, and Work Orders (W/O). Maintain and update personal and tool certifications to ensure compliance with industry standards and safety regulations. Initiate and document planning, engineering, or tooling changes using appropriate forms and online systems. Verify the accuracy of pre-picked detail parts, drawings, and assemblies against Work Orders, Installation Plans (IP), and Bills of Material (BOM). Perform layout work and create shop aids to facilitate the fitting of parts into airframes and special projects. Utilize Precision Measuring Equipment (PME) and laser trackers to locate and align parts on assembly tools according to specifications. Execute drilling, reaming, and countersinking of holes in parts and assemblies, adhering to specified sequences and sizes. Disassemble parts and prepare them for installation by deburring holes and cleaning surfaces with solvents. Apply sealants, primers, and adhesives as required by Work Orders, Installation Plans, and specifications. Install fasteners in the correct sequence using appropriate tools, ensuring compliance with specifications and drawings. Locate and install fuel, hydraulic, and high-pressure gas lines, conducting pressure tests for leaks as necessary. Bore and ream lug and fitting holes to specified sizes using appropriate tools and fixtures. Perform rework on non-compliant parts to meet drawing tolerances, including shot peening as required. Collaborate with engineering teams to address design-related issues or modifications during the assembly process. Participate in continuous improvement initiatives by suggesting enhancements to workflows or tools based on hands-on experience. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications 3+ years of experience using coordinate measurement machines, laser trackers, and/or optical measurement devices. 3+ years of experience with various types of hand held power tools Experience defining manufacturing and assembly plans for machining and fabrication of parts, subassemblies, final assemblies. Experience performing aircraft structural and mechanical work. Experience handling chemicals and/or hazardous materials. Preferred Qualifications: Experience in aerospace, automotive, robotics or similar industry. Enrollment in a Boeing partnered manufacturing related high school or community and technology college academic program. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32 with potential to earn up to 56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jan. 30, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Department: Services Reports to: Shop Supervisor FLSA Status: Non-Exempt About the Role Join our Services team as a Valve Technician, where you'll play a critical role in servicing and repairing industrial valves and actuators both in-shop and on-site. You'll collaborate with customers, suppliers, account managers, and internal teams to deliver high-quality mechanical solutions. Key Responsibilities Inspect, repair, and test a wide range of valves: control, safety, relief, gate, globe, check, ball, butterfly, and plug Service pneumatic, hydraulic, and electric actuators Perform full-cycle valve repair: pre-testing, disassembly, cleaning, machining, lapping, painting, assembly, and final inspection Calibrate and test valves and related instrumentation Document repair activities including failure analysis, parts used, and corrective actions Set up and dismantle repair equipment at shop and field locations Provide technical support and troubleshooting to customers Follow National Board VR/UV program guidelines Comply with site-specific safety protocols Maintain a clean and organized work environment Participate in Safety and Quality program Physical Requirements Lift up to 44 lbs Perform twisting, turning, and lifting motions Climb stairs, ladders, and scaffolding (10-30+ feet) Work in varied environments including heat, cold, and clean rooms Travel Overnight travel required Work performed at Control Southern facilities and customer sites Qualifications 1-3 years of experience in valve, pump, or actuator repair preferred Welding and machining skills are a plus Valid driver's license and insurability under company policy Core Competencies Strong verbal and written communication skills Mechanical aptitude and technical troubleshooting ability Effective time management and task focus Team-oriented with a commitment to safety Familiarity with rigging and handling heavy equipment Ability to operate overhead cranes, forklifts, sand blasters, seat facing machines, and power tools Flexibility to work off-hours, weekends, and overtime as needed

Join Control Southern's expert team and help keep critical industrial systems running safely and efficiently. What You'll Do Inspect, repair, and maintain a variety of valves (control, safety, relief, gate, globe, check, ball, butterfly, plug) and actuators (pneumatic, hydraulic, electric). Perform calibration, testing, and troubleshooting of valves and process instrumentation. Complete full repair cycle: pre-testing, disassembly, cleaning, machining, lapping, painting, assembly, and final inspection. Document all repair activities, including cause of failure and parts used. Provide technical support and communicate with customers on-site and in-shop. Adhere to National Board VR/UV program guidelines and site-specific safety requirements. Operate repair equipment such as overhead cranes, forklifts, sandblasters, and power tools. What We're Looking For Experience: 1-3 years in valve, pump, or actuator repair (or equivalent training). Welding and machining skills are a plus. Skills: Strong mechanical aptitude, troubleshooting ability, time management, and teamwork. Requirements: Valid driver's license and insurability. Ability to lift up to 44 lbs and work in varied conditions (heat, cold, clean rooms). Comfortable with off-hours, weekends, and overtime as needed. Knowledge of rigging and moving heavy equipment. Why Join Us? Be part of a safety-first culture with opportunities for growth. Work on diverse projects at our repair facilities and customer sites. Competitive pay and benefits. Ready to make an impact? Apply now and help us deliver reliability and safety to our customers.

Department: Services Reports to: Shop Supervisor FLSA Status: Non-Exempt About the Role Join our Services team as a Valve Technician, where you'll play a critical role in servicing and repairing industrial valves and actuators both in-shop and on-site. You'll collaborate with customers, suppliers, account managers, and internal teams to deliver high-quality mechanical solutions. Key Responsibilities Inspect, repair, and test a wide range of valves: control, safety, relief, gate, globe, check, ball, butterfly, and plug Service pneumatic, hydraulic, and electric actuators Perform full-cycle valve repair: pre-testing, disassembly, cleaning, machining, lapping, painting, assembly, and final inspection Calibrate and test valves and related instrumentation Document repair activities including failure analysis, parts used, and corrective actions Set up and dismantle repair equipment at shop and field locations Provide technical support and troubleshooting to customers Follow National Board VR/UV program guidelines Comply with site-specific safety protocols Maintain a clean and organized work environment Participate in Safety and Quality program Physical Requirements Lift up to 44 lbs Perform twisting, turning, and lifting motions Climb stairs, ladders, and scaffolding (10-30+ feet) Work in varied environments including heat, cold, and clean rooms Travel Overnight travel required Work performed at Control Southern facilities and customer sites Qualifications 1-3 years of experience in valve, pump, or actuator repair preferred Welding and machining skills are a plus Valid driver's license and insurability under company policy Core Competencies Strong verbal and written communication skills Mechanical aptitude and technical troubleshooting ability Effective time management and task focus Team-oriented with a commitment to safety Familiarity with rigging and handling heavy equipment Ability to operate overhead cranes, forklifts, sand blasters, seat facing machines, and power tools Flexibility to work off-hours, weekends, and overtime as needed