Packaging Engineer jobs at Magna International - 2463 jobs

Viking Technology, a division of Sanmina Corporation, leads the Enterprise and Embedded server and storage market in Solid State Drives (SSD), DRAM, and hybrid storage technologies. With a breadth of solutions that bridge both SSD and DRAM, Viking Technology has the ability to deliver any storage solution from high-performance computing SSDs down to embedded kiosk flash devices. Viking Technology has over two decades of focused storage and DRAM development, delivering high technology solutions that optimize the value and performance of customers' applications in the Enterprise, Network Infrastructure, Embedded, and Defense & Aerospace markets. With an extensive product breadth of SSD and DRAM, Viking Technology stands as one of the top Tier storage solution provider in the market. Job Purpose: Candidate will lead the design and development of innovative microelectronics packaging solutions for high density memory products targeted at the defense, aerospace, and commercial markets. Nature of Duties/Responsibilities: Lead a team of engineers and subcontractors in the development and qualification of DRAM and Flash products including multichip modules (MCM), plastic ball grid array multichip packages (MCP), and System-In-Package (SiP) solutions. Responsible for project scheduling and execution, project status reporting, and providing technical guidance to the team. Interface directly with onshore and offshore assembly and test subcontractors (OSAT) and OEM customers. Some travel may be required. Education and Experience: Minimum 10-12 years related experience. BS in Microelectronics Packaging, EE, Mechanical Engineering, Physics, or Materials Experience in the design of semiconductor packages such as plastic ball grid arrays, MultiChip Packages (MCPs), and System-in-Package (SiP). Solid understanding of semiconductor package design parameters and their influence on cost, thermal and electrical performance, reliability, and manufacturability Experience leading cross-functional engineering teams in complex microelectronics packaging projects. Project management experience including scheduling, status reporting, and subcontractor management. Thorough understanding of microelectronics package design flow, including mechanical design, signal integrity simulation, thermal simulation, schematic capture, and PCB layout Thorough understanding of high volume manufacturing processes for semiconductor ICs (backend packaging and test) Familiarity with silicon wafer post-process techniques such as wafer thinning, dicing, and RDL application. Thorough understanding and experience in packaging qualification testing techniques and industry standard test methods Experience interfacing directly with onshore and offshore microelectronics assembly and test subcontractors (OSAT) Experience with printed circuit board assembly, SMT processing equipment and methods Familiarity with integrated circuit functional test and burn in techniques. Excellent verbal and written communication skills PACKAGING Skills Wafer level packaging, Wafer preparation (dicing, grinding, wafer expansion, die singulation) Die pick and place, Die Attach, Die Stack, MEMS die, FLIP CHIP, Underfill, Thermo-compression bonding, WIREBOND, Molding (transfer mold) Compression mold, vacuum mold, film-assist mold), Dam and Fill dispense, Ball Attach, Solder Reflow, Singulation, Tape and Reel, SMT (Surface Mount Technology). Packages handled and developed: QFP, TQFP, SOP, TSOP, QFN, Flip Chip, Cu pillar FC, BGA, CSP, FAN-OUT WAFER LEVEL PACKAGING (FOWLP), 2.5DIC, 3DIC, Thru mold vias, Thru-silicon Sanmina is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity This is an ITAR facility. Must be US Citizen or lawful permanent resident. #J-18808-Ljbffr

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

Evansville, IN $90,000 - 125,000 29010 Our client has been the go-to supplier for their products for decades and their name is well respected in the metals industry. They depend on people with knowledge of materials and metallurgy for their manufacturing, and not just in product development. Advancement opportunities are plentiful and promoting from within is their first choice to fill open positions. Currently, they are client is looking to add a Metallurgist to their team. Why apply? Growth potential A company that values work-life balance Comprehensive benefits program Relocation assistance for those out of the area Duties of the Metallurgist include: Leading the lab testing of metals Investigating any issues with metals and assisting with the corrective actions Managing the work of Lab Technicians Perform metallurgical analysis on non-conforming products Writing testing instructions and material parameters Ensuring metals are in compliance with industry and customer standards Ensuring quality and testing documentation is completed and updated Working with customers and suppliers on metal deficiencies Being a point of contact to answer material questions Ensuring safety and quality standards are followed within the lab To be considered for the Metallurgist position you must have: An Associate's in Materials Science, Metallurgical Engineering, or Metallurgy Experience as a Metallurgist or Metallurgical Engineer is mandatory Excellent communication skills and leadership skills Please apply or send us a copy of your resume to ******************. All of your information will be kept confidential. Please feel free to call us at ************. Applications that fit the listed requirements will be contacted within 2-3 business days to schedule an initial phone interview with the Omni One team.

Unify was founded January 17th, 2023 by Austin Hughes and Connor Heggie. Prior to Unify, Austin led Ramp's growth product team focused on new customer acquisition, and Connor was a machine learning research engineer at Scale AI. The rest of our team comes from companies like Airbnb, Spotify, Bridgewater and LinkedIn. Our mission is to build the first system-of-action for go-to-market teams, starting with an end to end platform powering warm outbound. Today, outbound sales is dominated by cold, mass outreach that floods people's inboxes and converts to deals at a tiny rate. We're building a platform to power warm outbound, allowing go-to-market teams to get in touch with the right people at the exact time they're looking for a solution. We've grown revenue 8x year-over-year, and are already serving customers like Guru, Justworks, Together.AI, Flock Safety, Hightouch and more. We're a high energy, high intensity team and we've raised $58M from Thrive, Emergence, OpenAI and others. Come join us in changing how go-to-market works. About the Role Unify is redefining go-to-market with state-of-the-art AI. As a Senior SRE, you'll tackle the scaling and reliability challenges that come with adding terabytes of data monthly and supporting enterprise customers with demanding uptime requirements. You'll work across the stack-optimizing databases, hardening services, and building the automation and observability that keep Unify fast and reliable at scale. What You'll Do Scale our data infrastructure: Optimize and extend our ClickHouse and PostgreSQL deployments-designing partitioning strategies, tuning queries, and improving replication and failover systems. Improve system performance: Profile and optimize critical paths across backend services, identify bottlenecks in data pipelines and API layers, and ship changes that improve latency and throughput. Build for reliability: Implement rate limiting, circuit breakers, graceful degradation, and other patterns that keep the platform stable under load and during partial failures. Automate everything: Write tooling that eliminates toil-automating deployments, scaling operations, backup verification, and incident remediation. Instrument and observe: Build out distributed tracing, metrics, and alerting that give engineers clear visibility into system behavior and accelerate debugging. Respond and learn: Participate in on-call rotations, run incident response, and drive blameless postmortems that prevent recurrence. Who You Are 5+ years of software engineering experience with a strong backend foundation, including 2+ years focused on reliability, infrastructure, or platform work. Hands‑handon experience operating databases at scale including query optimization, replication, and failover. Strong programming skills (Typescript, Python, Go, or similar) with experience building automation and tooling. Able to diagnose complex distributed systems issues under pressure and communicate clearly during incidents. Collaborative, low-ego attitude and desire to work in a fast‑paced environment. #J-18808-Ljbffr

pSemi Corporation is a Murata company driving semiconductor integration. pSemi builds on Peregrine Semiconductor's 30-year legacy of technology advancements and strong IP portfolio but with a new mission-to enhance Murata's world-class capabilities with high-performance semiconductors. With a strong foundation in RF integration, pSemi's product portfolio now spans power management, connected sensors, optical transceivers, antenna tuning and RF frontends. These intelligent and efficient semiconductors enable advanced modules for smartphones, base stations, personal computers, electric vehicles, data centers, IoT devices and healthcare. From headquarters in San Diego and offices around the world, pSemi's team explores new ways to make electronics for the connected world smaller, thinner, faster and better. Job Summary The Device Engineering Process role focuses on the development, integration, and optimization of semiconductor process technologies to support high-performance RF circuits. This includes collaborating with wafer foundries, defining and refining process modules (e.g., lithography, etching, deposition), and ensuring device reliability through rigorous testing and analysis. The engineer applies deep knowledge of device physics and process interactions to enable robust, scalable RFIC solutions aligned with technology roadmaps and product requirements. Responsibilities Define and drive execution of the technology roadmap for RFIC processes. Present technical strategy and roadmap updates to senior leadership. Drive innovation and contribute to intellectual property generation. Guide teams in advanced failure analysis and process construction methodologies. Ensure alignment of process development with product and business goals. Lead cross-functional project delivery with high autonomy and accountability. Develop and validate new process building blocks for next-generation technologies. Mentor staff and senior engineers to elevate technical capabilities. Use advanced modeling tools for EM, thermal, and mechanical simulations. Lead strategic process development initiatives with internal teams and external foundries. Minimum Qualifications (Experience and Skills) 8-12 years of experience in semiconductor industry Ability to define and execute technology roadmaps. Ability to mentor senior engineers and technical staff. Deep understanding of semiconductor manufacturing. Excellent communication and stakeholder engagement. Experience guiding advanced failure analysis efforts. Experience managing cross-functional teams and projects. Experience with modeling and simulation tools. Mastery of semiconductor process integration and layout interactions. Proven track record of innovation and IP contribution. Strong leadership and strategic thinking skills. Education Requirements MS or PhD in Electrical Engineering, Physics, Material Science, or related field. USD 177,975.75 - 231,381.29 per year Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position requires the ability to occasionally lift office products and supplies, up to 20 pounds. pSemi Corporation supports a diverse workforce and is committed to a policy of equal employment opportunity for applicants and employees. pSemi does not discriminate on the basis of age, race, color, religion (including religious dress and grooming practices), sex/gender (including pregnancy, childbirth, or related medical conditions or breastfeeding), gender identity, gender expression, genetic information, national origin (including language use restrictions and possession of a driver's license issued under Vehicle Code section 12801.9), ancestry, physical or mental disability, legally-protected medical condition, military or veteran status (including “protected veterans” under applicable affirmative action laws), marital status, sexual orientation, or any other basis protected by local, state or federal laws applicable to the Company. pSemi also prohibits discrimination based on the perception that an employee or applicant has any of those characteristics, or is associated with a person who has or is perceived as having any of those characteristics. Note: The Peregrine Semiconductor name, Peregrine Semiconductor logoand UltraCMOS are registered trademarks and the pSemi name, pSemi logo, HaRP and DuNE are trademarks of pSemi Corporation in the U.S. and other countries. All other trademarks are the property of their respective companies. pSemi products are protected under one or more of the following U.S. Patents: ************************ #J-18808-Ljbffr

Unify was founded January 17th, 2023 by Austin Hughes and Connor Heggie. Prior to Unify, Austin led Ramp's growth product team focused on new customer acquisition, and Connor was a machine learning research engineer at Scale AI. The rest of our team comes from companies like Airbnb, Spotify, Bridgewater and LinkedIn. Our mission is to build the first system-of-action for go-to-market teams, starting with an end to end platform powering warm outbound. Today, outbound sales is dominated by cold, mass outreach that floods people's inboxes and converts to deals at a tiny rate. We're building a platform to power warm outbound, allowing go-to-market teams to get in touch with the right people at the exact time they're looking for a solution. We've grown revenue 8x year-over-year, and are already serving customers like Guru, Justworks, Together.AI, Flock Safety, Hightouch and more. We're a high energy, high intensity team and we've raised $58M from Thrive, Emergence, OpenAI and others. Come join us in changing how go-to-market works. About the Role Unify is redefining go-to-market with state-of-the-art AI. As a Senior SRE, you'll tackle the scaling and reliability challenges that come with adding terabytes of data monthly and supporting enterprise customers with demanding uptime requirements. You'll work across the stack-optimizing databases, hardening services, and building the automation and observability that keep Unify fast and reliable at scale. What You'll Do Scale our data infrastructure: Optimize and extend our ClickHouse and PostgreSQL deployments-designing partitioning strategies, tuning queries, and improving replication and failover systems. Improve system performance: Profile and optimize critical paths across backend services, identify bottlenecks in data pipelines and API layers, and ship changes that improve latency and throughput. Build for reliability: Implement rate limiting, circuit breakers, graceful degradation, and other patterns that keep the platform stable under load and during partial failures. Automate everything: Write tooling that eliminates toil-automating deployments, scaling operations, backup verification, and incident remediation. Instrument and observe: Build out distributed tracing, metrics, and alerting that give engineers clear visibility into system behavior and accelerate debugging. Respond and learn: Participate in on-call rotations, run incident response, and drive blameless postmortems that prevent recurrence. Who You Are 5+ years of software engineering experience with a strong backend foundation, including 2+ years focused on reliability, infrastructure, or platform work. Hands‑handon experience operating databases at scale including query optimization, replication, and failover. Strong programming skills (Typescript, Python, Go, or similar) with experience building automation and tooling. Able to diagnose complex distributed systems issues under pressure and communicate clearly during incidents. Collaborative, low-ego attitude and desire to work in a fast‑paced environment. #J-18808-Ljbffr

The Tooling Engineer is responsible for the setup, maintenance, and optimization of tools, dies, and molds used in manufacturing operations. This role ensures that all tooling supports efficient production, maintains product quality, and meets safety and cost objectives. The Tooling Engineer works closely with production, maintenance, and engineering teams to troubleshoot tooling issues and drive continuous improvement initiatives. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Understand the fundamentals of cold forming, heading and rolling machines. Preform failure analysis and implement countermeasures on tooling when life ended prematurely Repair critical tooling: tear down, measure, replace components, rebuild and return to machine Manage tooling projects from concept through production, including design changes, supplier coordination, testing, and approval. Assist material changes, prototypes, and validating new tooling for new parts, referred to as Production Order Sheets (POS) Proficiency in CAD software (e.g., AutoCAD, SolidWorks) Learn to operate the equipment and assist production team members in their training. Provide technical training and support to operators and maintenance personnel. Ensure all tooling meets design specifications, safety standards, and production requirements. Ensure the plant has tooling available. Order, stock, inventory & distribute the replenishment tooling. Design, develop, and validate tooling, jigs, fixtures, and gauges to support manufacturing Oversee tooling fabrication, modification, and maintenance activities-both in-house and with external vendors. Create, Update and Maintain tool drawings, productions documents, set up sheets, progression sheets, tool list, etc. Support continuous improvement initiatives in tooling design, standardization, and performance. Act as a backup when other Tool Room team members are out Participate on the weekly / monthly ASJ project conference calls Other duties as assigned QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The essential duties and responsibilities are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience Bachelor's degree + experience (0-3 years) Associate degree + experience (3-7 years) Applicable experience only (7+ years) Knowledge of cold forming equipment & processes is beneficial COMMUNICATION Effective communication skills to collaborate with other team members and suppliers. Ability to interpret technical procedures or drawings. Fluent in English. Japanese as a second language is helpful. PROBLEM-SOLVING Ability to identify and resolve technical challenges related to tooling PHYSICAL DEMANDS Required to stand, walk and sit; talk or hear, both in person and by telephone; use hands to finger, handle or feel objects or controls; reach with hands and arms. Regularly required to stoop, kneel, bend, crouch and lift up to 25 pounds. COMPANY VISION & VALUES "Indiana Automotive Fasteners is an Equal Employment Opportunity Employer and prohibits discrimination and harassment of any kind; Indiana Automotive Fasteners is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Indiana Automotive Fasteners are based on business needs, job requirements, and Individual qualifications, without regard to race, color, religion, or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental, or sensory disability, HIV Status, sexual orientation, gender identity and or/expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by laws or regulation in the location where we operate. Indiana Automotive Fasteners will not tolerate discrimination or harassment based on any of these characteristics.”

The Bay Area Air District (Air District) is a regional government agency committed to achieving clean air to protect public health and the environment. We regulate industrial facilities and administer outreach and incentive programs to encourage clean air choices across seven counties (Alameda, Contra Costa, Marin, San Francisco, San Mateo, Santa Clara, and Napa) plus portions of Solano and Sonoma. We strive for a diverse, inclusive workplace with pay equity, work-life balance, and opportunities for growth. We are accepting applications for the position of Principal Air Quality Engineer, for three full-time, represented positions: one in the Regulatory Development Division and two in the Engineering Division. The job description below outlines division-specific responsibilities and program focus, as well as qualifications and application details. Regulatory Development Division The Regulatory Development Division works with staff, management, executives, and Board members to develop and modify Air District rules to provide emissions reductions, improve air quality, and protect the climate. The Principal Air Quality Engineer for the Regulatory Development Division will: work closely with professional and technical staff to perform and lead complex program assignments for developing regulations to control air pollutants (including those contributing to climate change and local air quality impacts in overburdened communities) work with the California Air Resources Board, other local air districts, community groups, community members, environmental organizations, regulated industries, and other key stakeholders to reduce harmful air pollutants, especially in communities overburdened by air pollution lead, conduct, and coordinate scientific, economic, and technical research work review and draft regulatory language, develop and implement cost effectiveness and incremental cost effectiveness calculations for a wide variety of sources in an industry with various control options analyze emissions inventories to determine baseline emissions and reduction estimates for rules under development brief Air District executives and present at workshops and board meetings work closely with the Community Engagement Division staff and other Air District divisions to strengthen partnerships with key community stakeholders perform related work as assigned Engineering Division The Engineering Division evaluates permit applications and reviews permit renewals for equipment and operations that emit air pollutants within the Air District's jurisdiction. It provides technical support to other programs and assists businesses, trade associations, agencies, environmental groups, and community members with permitting and compliance issues. The division is responsible for implementing the Air District's Facility Risk Reduction Program to reduce health risks from existing facilities or sources. The position will work on the Air District's Toxic Air Contaminant (TAC) Control Programs, designed to identify, assess, and reduce public exposure to toxic air contaminants. The programs integrate federal, state, and local regulations to: Monitor and evaluate TAC emissions from permitted facilities through annual emissions inventories and health risk assessments Implement the Air Toxics New Source Review (NSR) program, requiring preconstruction review and risk assessment for new or modified TAC sources Operate Facility Risk Reduction Programs, targeting existing facilities to identify, assess, and reduce health risks, especially in communities with disproportionate air quality impacts Engage with community stakeholders and provide transparent access to emissions data and health risk information through annual reports and online tools These efforts have led to significant reductions in health risks from toxic air contaminants across the Bay Area. The Engineering Division also engages in programs and projects including, but not limited to: Dispersion modeling and health risk assessments for toxic emissions Verification of emissions inventories Database development and data management Development of new regulations or amendments of existing regulations Strategic planning of division programs The Principal Air Quality Engineer for the Engineering Division may perform other complex and highly specialized air quality engineering work, including: Processing permit applications for complex facilities Analyzing air emissions and other metadata Evaluating program effectiveness Providing project leadership This role also involves peer review, staff mentoring, and training. The incumbent may lead or contribute to sensitive, high-profile projects and deliver technical presentations to the Board of Directors, public, industry, and partner agencies, and may represent the Air District in multi-agency working groups. Definition Under direction, performs the most complex and highly specialized level of assigned air quality engineering activities and may supervise staff on a project basis or lead project teams; performs related work as assigned. Distinguishing Characteristics Under direction, performs the most complex and highly specialized level of assigned air quality engineering activities and may supervise staff on a project basis or lead project teams; performs related work as assigned. Education & Experience Equivalent to graduation from a four-year college or university with major coursework in environmental, chemical, mechanical or petroleum engineering or a closely related field, and four years of air quality environmental engineering experience. Alternatively, a Master's Degree with the same focus and four years of experience. Other Requirements Must possess a valid California driver's license and a valid California Professional Engineer license. How to Apply & Selection Criteria How to Apply Interested individuals must submit a completed Air District application and responses to the supplemental questionnaire by 5:00 p.m. on Monday, November 3, 2025. Resumes are encouraged but not mandatory and will not be accepted in lieu of the required application materials. Applications are accepted online; please visit our website at ******************* to apply. Postmarks, faxes, and e-mailed applications will not be accepted. Except as requested, do not include additional documents. They will not be considered. Supplemental Questions Instructions Applicants must respond to each required supplemental question. Limit responses to no more than one page (500 words) per question. Do not reference your resume or other documents. This information will be evaluated to determine the most directly related experience, education, and training. Selection Criteria Selection may be based on a competitive exam (written, interview, or both). Depending on applicant volume, an application screening and/or panel interview may be used. The Air District may hire from this process to fill future vacancies for 18 months. Persons with disabilities who may require accommodations should notify the Human Resources Office. The Air District is an Equal Opportunity Employer. #J-18808-Ljbffr

A semiconductor technology company is seeking a Senior Staff Engineer in Device Process Engineering in San Diego, CA. This role focuses on optimizing semiconductor processes for RF circuits, collaborating with teams to drive innovation, and mentoring staff. Candidates should have 8-12 years of experience in the semiconductor industry and hold an advanced degree in a relevant field. The position offers a competitive salary ranging from USD 177,975 to 231,381 annually. #J-18808-Ljbffr

Title: Staff Engineer, MEMS Process Development Department: R&D, MedTech & Specialty Audio SUMMARY DESCRIPTION: Knowles seeks a motivated and creative individual to work in a fast-paced, market-oriented R&D team environment, developing MEMS technology for microphones and related mobile platform applications. A strong preference will be given to individuals with experience in MEMS process integration/process transfer and characterization of MEMS devices. Individuals will also be expected to have expertise in the knowledge of the foundry integration process, the basic of MEMS technology, data mining, statistical analysis, troubleshooting, failure prediction, DOE setup. Candidate will be expected to offer creative insights and solutions for R&D and production problems, to characterize and design MEMS process windows, to help execute and analyze statistical designed experiments and to carry out written and oral reporting. SPECIFIC DUTIES AND RESPONSIBILITIES: Interface with MEMS wafer foundry partners to execute on new product introductions (NPI) work. The basic concepts of the semiconductor foundry processes are a must requirement. Fast-reacted and responsible for any new issues and work closely with foundry suppliers. Collaborate with cross-functional team to understand issues and drive the root cause for each issue to achieve a stable high volume mass production products. Create and analyze statistically designed experiments to effectively evaluate process corners to identify major risks and ensure margin for high volume applications. Develop and implement techniques for gathering and analyzing large data sets to identify currently unknown relationships between in-line metrics and final device performance. Candidate with Failure analysis skills (SEM, FIB, TEM, SIMS, FTIR, Raman, etc.) is plus. POSITION REQUIREMENTS: Master Degree or above in Engineering field (e.g. Electrical Engineering, Materials Science, Chemical Engineering, Mechanical Engineering or Physics). Candidate with Master degree must have 7 years' process experience in MEMS or semiconductor industrial field. Candidate with PhD degree must have minimum 3 years' process experience in MEMS or semiconductor industrial field Candidate with MEMS/semiconductor/display process integration and process transfer expertise is plus. Statistical analysis software experience such as JMP, SAS, Minitab is preferred. A strong background in communication, negotiation, DOE setup, data analysis and reporting skills. Characterization/failure analysis experience in SEM, FIB, surface science analysis, interferometry, electrical testing, etc. is plus. Knowledgeable with scripting languages; including python and JMP JSL is plus. Ability to travel overseas occasionally and participate in evening calls with Asia COMPANY DESCRIPTION: Knowles is a market leader and global provider of advanced micro-acoustic microphones and balanced armature speakers, audio solutions, and high performance capacitors and radio frequency ("RF") filtering products, serving the MedTech, defense, consumer electronics, electric vehicle, industrial, and communications markets. Our focus on the customer, combined with unique technology, proprietary manufacturing techniques, and global operational expertise, enables us to deliver innovative solutions across multiple applications. Knowles, founded in 1946 and headquartered in Itasca, Illinois, has approximately 7,000 employees at facilities located in 13 countries around the world. At Knowles, we are committed to engineering a better tomorrow through the actions we take on a daily basis. We believe that our focus on ethical, socially responsible, and environmentally sustainable behavior guides our decision-making processes and helps keep us accountable. Visit us at knowles.com EEO-M/F/D/V

About the Role: This role is ideal for a hands-on professional who has successfully developed reliability systems from the ground up-establishing standards, leading and driving Root Cause Problem Elimination, improving SAP PM utilization, and driving measurable improvements in equipment uptime. The position will focus on critical assets including rotating equipment, belt conveying systems, and hydraulic systems, while helping to refine the structure, processes, and culture necessary for a sustainable reliability-centered organization. Responsibilities: Learn, accept and live Century Aluminum's Safety Mission Statement Review current maintenance and reliability practices and develop an improvement roadmap Drive the core elements of an RCM-based program: criticality ranking, PM optimization, failure coding, and defect elimination Create equipment standards, inspection routes, lubrication practices, and precision maintenance procedures Develop metrics and dashboards to track MTBF, MTTR, OEE, and bad actors. Lead improvement of SAP PM master data, equipment hierarchies, task lists, and maintenance plans Partner with planners to build accurate job plans, BOMs, and material strategies Use SAP data to drive fact-based reliability decisions rather than reactive maintenance Provide reliability engineering for: Rotating equipment - motors, gearboxes, pumps, fans, bearings, couplings; Belt conveyors & bulk handling - pulleys, idlers, tracking, take-ups, transfer points; Hydraulic systems - power units, cylinders, presses, valves, contamination control Lead RCPE of chronic equipment problems and recurring failures Oversee and expand condition-based maintenance programs using vibration, thermography, ultrasound, and oil analysis Integrate modern technologies across the plant to further predictive maintenance Facilitate root cause failure analysis (RCFA) for high-impact events Support capital projects with maintainability and reliability input Mentor maintenance and operations teams in reliability best practices Drive cultural change from reactive to planned and predictive maintenance Qualifications: Bachelor's degree in engineering or equivalent experience 5+ years in reliability or maintenance engineering in heavy industry Demonstrated success building or maturing a reliability program Hands-on SAP PM experience (maintenance plans, master data, reporting) Proven ability to lead RCFA and translate findings into system improvements Preferred Skills: CMRP, CRE, or similar certification Experience in metals, mining, cement, carbon/anode, or comparable processes Familiarity with PdM technologies and integration with SAP Experience developing lubrication and contamination control programs Equal Opportunity Statement: This position has the responsibility to support and carry out the Company's policy on Equal Employment Opportunity/Affirmative Action.

About Us: BW Design Group is a fully integrated architecture, engineering, construction, system integration, and consulting firm committed to helping our clients realize their most critical goals from Strategy to Commercialization. As the only firm born from a manufacturing technology company to become an independent and fully integrated firm, we combine deep domain expertise in the manufacturing environment with an approach that is built to serve the dynamic needs of our clients. Rooted in our distinct culture of Truly Human Leadership, we cultivate the leaders who will define tomorrow and partner with our clients in the food & beverage, life sciences, industrial, and advanced technology industries to build the future of manufacturing and technology. Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: Who You'll Work With You will join one of our 45 offices in the US, be part of a committed team of over 1500 professionals, and work in teams and directly with our clients doing work that is shaping the world around us. You will be welcomed into a rapidly growing business and team and empowered to make an impact. You will be valued, cared for, and challenged on your path to becoming a world-class professional consultant and surrounded by leaders who are committed to creating an environment that enables you to realize your own success and fulfillment. When you join Design Group as a Process Engineer, you are joining a team that will challenge you and position you for growth. In this role, you will work with a team of industry experts to help the world's leading companies solve their most difficult problems. You will join our Architecture/Engineering Process Practice and partner with seasoned leaders, technical specialists, and subject matter experts to deliver the highest quality solutions to our clients with consistency and accuracy. What You'll Do You'll work individually and in teams to support capital projects and implement solutions for our clients. Together, you will help our clients make critical changes to improve their performance and realize their most important goals. Assume responsibility for process mechanical design, process equipment and installation specifications, vendor and contractor management, and installation and start-up support Maintain and grow solid client relationships Develop process flow diagrams and process & instrument diagrams (P&IDs) Create specifications for process equipment procurement and installation Create basic piping system design, pump sizing calculations, mass & energy balance calculations, and functional & installation specifications Manage project documentation Lead project teams and coordinate with multidisciplinary project teams Supervise designers and junior level engineers Handle equipment procurement and develop material handling methods Manage vendors and contractors Provide installation and start-up support Troubleshoot equipment problems What You'll Bring A minimum of five years of industrial project engineering experience involving process and related automation applications Experience in the food, dairy, beverage/brewery, or personal care industries (preferred) Strong analytical skills and a basic understanding of project management fundamentals Proficiency in Microsoft Office, Microsoft Project, and Revit Effective organizational, communication, and interpersonal skills A solid understanding of process flow diagrams, piping & instrument diagrams, mass & heat balances, basic piping system design, pump sizing, material handling methods, equipment, functional & installation specifications, and process instrumentation & control principles A practical understanding of sanitary design and construction methods, and process electrical/control and instrumentation design integration (preferred) The ability to work with minimal supervision A willingness to travel for project requirements including installation and start-up activities, client and company sponsored meetings, trainings, industry related seminars, forums, and conventions A bachelor of science in mechanical or chemical engineering, or a similar engineering degree with applicable project experience Our culture and commitment to our people is what sets us apart. We foster an environment of mutual respect, integrity, and unconditional interest in the individual and collective success of our professionals. Our model and entrepreneurial mindset offer a rewarding, challenging, and highly flexible path. As a Process Engineer, you will build a meaningful and fulfilling career with the support of professional development resources and mentorships including our First Year Experience program, Individual Development Plans, and Career Path resources and tools. You will be surrounded by exceptional talent who will support your development as both a world-class engineer and a highly effective leader. Feel like you're on the path to becoming a Process Engineer but you're not quite there yet? We'd love to connect with you to see if we can take you from where you are today and grow you into a Design Group Engineering Consultant. The approximate pay range for this position is $80,000-$110,00. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and abilities as well as geographic location of the position. #LI-TT At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work-therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Barry-Wehmiller is an equal opportunity employer. M/F/D/V This organization uses E-Verify. Applicants may be subject to pre-employment screening which may include drug screening, reference checks, employment verifications, background screening and/or skills assessments. Company: Design Group

Corporation Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. This role in summary Whirlpool is currently seeking a qualified candidates for a Process Transformation Industrial Engineer opening to join the Process Transformation Group. This role will be onsite at our Ottawa, OH manufacturing site. Whirlpool is looking for an experienced Industrial Engineer with a strong background in manufacturing operations. As part of the Process Transformation Group, the successful candidate will work closely with the Value Stream Manager and Manufacturing to identify opportunities for improvement and quantify the potential savings that are available. For rebalancing and scheduling improvement opportunities, the candidate will drive the change from the scoping phase through to execution and validation. They will also work closely with the rest of the Process Transformation team in developing project business cases to determine which capital projects get pursued. The successful candidate will be at the forefront of developing new products by providing consultation services related to design for manufacturing, while determining the anticipated impact to the existing manufacturing footprint. Your responsibilities will include * Working closely with product designers and new model teams to understand the impact of proposed changes and drive alignment between design and manufacturing. * Working closely with NAR manufacturing locations to define, scope and implement a variety of cost savings projects. * Responsible for scoping, implementation, vertical start-up, and formal equipment handover of all assigned capital acquisition projects. * Utilizing World Class Manufacturing (WCM) Early Equipment Management (EEM) methodology and tools to plan, design, develop, build, install and startup new assets. * Improving speed in which we deliver winning technology and products to the marketplace. * Ensuring that new manufacturing processes are flexible in design to accommodate long range new product cadence plans with the intent of minimizing future capital requirements. * Working with the Advanced Manufacturing Group to validate and implement the latest manufacturing technology and techniques. * Leading other projects and special assignments as required. * Travel up to 10% Minimum requirements * Bachelor's Degree in Engineering or Engineering Technology * 1+ years of manufacturing experience * 1+ years of experience with Autocad software Preferred skills and experiences * Bachelor's Degree in Industrial Engineering * Strong understanding of Lean Manufacturing concepts * Strong analytical and problem solving skills * Strong interpersonal and team building skills with the ability to work in a team environment * Excellent project management and time management skills * Ability to manage project teams including internal and external resources * Willing to work on the manufacturing floor with a strong work ethic * Demonstrated history of gathering input from key stakeholders and gaining their buy-in * Experience with industrial equipment such as plastic molds, injection molding machines, robotics, metal forming equipment, material handling equipment, assembly line equipment/cells, etc * Experience with identifying cost improvement opportunities by developing the supporting business case documentation and justification RSRWH What we offer Generous benefits package, Whirlpool employee discount, fitness & educational reimbursement programs, kitchenettes, and more! Saint Joseph/Benton Harbor locations: Beautiful, recently renovated office space, free coffee, biking/walking trails, and access to The Eddy - Early Childhood Center (depending upon availability - additional costs required). Additional information Whirlpool's Ways of Working Our goal is to provide an environment that helps you bring your best to Whirlpool every day. We offer flexibility and industry-leading time-off benefits that will help you balance what's important at work and at home, including: * Always On Flexibility - You will have the autonomy to manage personal, family, and outside-of-work commitments as needed. * Two-Week Work from Anywhere - Minimum of one-week increments for a total of two weeks per year. * Sabbatical - Four weeks paid leave after every five years of service. Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers. Additional information about the company can be found on Facebook, Twitter, LinkedIn, Instagram and YouTube. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

External Description: NA Community / Marketing Title: Process Transformation Industrial Engineer

Who we are: The Gill Corporation is one of the world's largest manufacturers of honeycomb, high performance floor panels, cargo compartment liners and original equipment for passenger and freighter aircraft. The company also excels in many other types of reinforced plastics including interior sandwich panels for creating structures such as aircraft galleys and bulkheads, honeycomb core and related products. Under general supervision, manage specific projects/tasks associated with continuous improvement and/or production sustainment; perform experiments and tests; record experimental data; make calculations and prepare brief reports covering the work. This position will report to the Director of Business Development in support of UDRI. Responsibilities: Develop and/or improve processes for the manufacture of new or existing products. Work with cross-functional teams (primarily Quality and Production) in leading efforts in improving product quality and customer satisfaction. Conduct root cause analysis and implement countermeasures to prevent failure recurrence. Develop and implement concepts, including Lean Manufacturing, etc., to reduce manufacturing cost and increase process throughput. Create/manage manufacturing documentation, and provide technical oversight to bring high priority projects to a successful conclusion including training. Lead manufacturing trials supported by data analysis and recommend appropriate next steps. Work in a proactive manner to manage the technical direction of assigned manufacturing areas, in concert with the overall technical direction of the site. Plan and lead the incorporation of engineering flowdown requirements to ensure on time delivery. Expanded technical competency of processes, materials, and products. Increased capability in workload management. Other essential duties may be assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required Qualifications: B.S. degree in Engineering or Science (Chemical, Mechanical, Material Science, Aerospace, Manufacturing, or Industrial Engineering fields) 2 to 4 years working experience in a manufacturing or laboratory environment Excellent verbal and written communication skills Strong mechanical aptitude and hands on mentality Ability to adjust to continuously shifting priorities Proficient computer skills - Microsoft suite (Word, Excel, PowerPoint, Project) Comfortable working on and around equipment and using proper PPE Ability to adjust to continuously shifting priorities Experience with composite materials and/or material sciences a plus Programming experience a plus (VBA, C or C++, etc) CAD experience a plus (CATIA, Solidworks, AutoCAD, etc) SAP experience a plus Knowledge of Lean Manufacturing principles a plus Minitab software experience a plus ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. The Gill Corporation is an Equal Opportunity Employer . Applicants for all job openings are welcome and will be considered without regard to race, religious creed, color, age, sex, gender identity, gender expression, genetic information, sexual orientation, national origin, religion, marital status, medical condition, physical or mental disability, military service, veteran status, pregnancy, childbirth and related medical conditions, or any other classification protected by federal, state, and local laws and ordinances. The Gill Corporation provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disability Act and applicable state and local law. If you require an accommodation in the application process, please notify the Human Resources Department

Role: Industrialization Process Engineer Role ID: 2025-3087 Salary: $85,000 - $95,000 annually Our vision is to create a safe and sustainable world. Ricardo, member of WSP, is a global strategic, environmental, and engineering consulting company. With over 100 years of engineering excellence and employing close to 3,000 employees in more than 20 countries, we provide exceptional levels of expertise in delivering leading-edge and innovative cross-sector sustainable products and solutions. Every day, we enable our customers to solve the most complex and dynamic challenges to help achieve a safe and sustainable world. The Role This position offers a hands-on opportunity to leverage process engineering experience. Responsibilities include overseeing equipment/industrial suppliers, quality assurance, and processes to ensure timely production starts for new products. Your main goal will be to support the delivery of industrialization projects for localized internal manufacturing programs. Key Responsibilities Designing, developing, and maintaining manufacturing processes for current and future programs. Developing, implementing, and operating manufacturing process documentation, including Design for Assembly (DFA), Design for Manufacturing (DFM), Build Processes, Process Control Plans, PFMEA, Risk Assessments, Safety Systems, and Launch Readiness. Supporting the specification and design of equipment layouts and material flows. Requisitioning new and modified tooling and equipment required for assembly, including specification, procurement, commissioning, installation, and validation. Supporting the production team during the industrialization phases to enhance production quality and efficiency. Assisting with prototype builds according to project delivery requirements, including early validation of production processes and tooling. Developing assembly work standards to support both the prototype phase (build books) and the transfer to standard work instructions for production. Continually improving manufacturing processes to meet cost, quality, and delivery performance targets through series production. Ensuring quality standards are achieved in a series production environment. Essential technical and professional skills, knowledge, and qualifications: Industry experience in automotive, marine, or aerospace. Preferred experience Powertrain Systems (ICE). Hands-on experience with lean manufacturing principles. Understanding of relevant manufacturing methods, including detailed drawing dimensioning and Geometric Dimensioning and Tolerancing (GD&T). Design and CAD experience for tooling and fixtures, virtual builds, factory layouts (2D/3D), and assembly equipment. Demonstrable knowledge of various manufacturing processes and components used in assembly, including DFMEA, PFMEA, Control Plans, Capability Studies, Gauge R&R, work instructions, equipment acceptance, and quality gates (e.g., End of Line testing). Experience in industrialization and launch readiness. Experience with ISO standards for best manufacturing practices and processes. (i.e. ISO 9001/ IATF 16946, ISO 14001). Exceptional 8D problem-solving skills. Experience with Manufacturing Execution Systems (MES). Preferred experience with vision systems (i.e. Cognex, Keyence). Required Qualifications Minimum of a bachelor's degree in mechanical, manufacturing, industrial, electrical engineering, or related field. 5+ years of relevant experience in manufacturing or process engineering. A minimum of 2 years' experience in New Product Introduction (NPI) process engineering or a similar role, preferably within the automotive sector, where skills can be transferred to the responsibilities outlined above. Behavioural Competencies Strong communication skills with the ability to engage effectively with suppliers and clients across cultures. Ability to work both as part of a team and independently, demonstrating self-motivation, reliability, and punctuality. Ethical integrity, upholding the highest values with colleagues, customers, and vendors. Resilience and a goal-oriented approach to achieving targets. Flexibility to travel to suppliers and clients domestically and internationally. Working Here At Ricardo, every voice matters. We foster inclusion, collaboration, and a culture where your expertise makes a difference. Your ideas will help us deliver innovative solutions that contribute to safer and more sustainable communities worldwide. Work-Life Balance We are open to discussing flexible work arrangements. Well-being is at the heart of our culture, enabling everyone to thrive. By prioritizing a healthy work-life balance, we create an environment where everyone can flourish and reach their full potential. Benefits We value our employees and offer a comprehensive benefits package to support your physical and mental well-being. Equal Employment Opportunity Ricardo is an equal opportunity employer. All qualified applicants will be considered for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or other legally protected status. #LI-AM1

Plan, coordinate, review, and improve manufacturing processes for the Post Exhaust Processing and Test production areas to assure efficient manufacturing operations, applying technical knowledge of manufacturing processes and equipment. Responsibilities and Tasks: Develop, review, improve manufacturing processes to assure efficient manufacturing operations in order to improve cost/yield/productivity and reduce waste/scrap/downtime Use data analytics techniques to identify areas of concern or areas for improvement Evaluate product quality using stereo microscopes or other test equipment to verify operator workmanship or determine root cause of process/yield issues Diagnose process and equipment issues and work with maintenance teams to keep equipment running optimally Analyze, optimize, or develop as necessary, visual and test equipment/methods for evaluation of electro-optical devices Interface with external customers regarding testing methodology Work with and train bargaining unit employees to improve work processes and product quality Perform other duties as assigned Qualifications: Bachelor's degree in engineering field, preferably electrical or computer science 2 + years relevant experience in manufacturing engineering or equivalent Strong analytical abilities and trouble-shooting techniques Strong verbal and written communication skills Capable of performing self-directed work but also the ability to work effectively within a team Good interpersonal and organizational skills Ability to obtain DoD Security Clearance Preferred Skills: Experience developing electrical test methods Experience with Visual Studio programming languages (C, C++, C#, VB, Python)

About Helion We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. Since Helion's founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward. Our last prototype, Trenta, completed 10,000 high-power pulses and reached plasma temperatures of 100 million degrees Celsius (9 keV). We are now operating Polaris, our next prototype on the path to the world's first fusion power plant. This is a pivotal time to join Helion. You will tackle real-world challenges with a team that prizes urgency, rigor, ownership, and a commitment to delivering hard truths - values essential to achieving what no one has before. Together, we will change the future of energy, because the world can't wait. What You Will Be Doing: You will play a key role in developing designs and materials suited for high-radiation environments, providing analysis and guidance to engineers on the behavior and performance of a wide range of materials under radiation exposure. In this onsite role, based at our Everett, WA office, you will report to the Director of Materials Science and collaborate closely with cross-functional teams to advance Helion's mission. You Will: Advise engineering design decisions based on radiation effects (due to neutrons) on materials used within the radiation shield vault, e.g., metals used in magnet coils, dielectrics used for structure, and ceramics Partner with neutronics engineers to predict dpa, analyze, model, and predict macroscopic effects on material properties including thermal conductivity, electrical resistivity, and mechanical strength. Assess system-level radiation risk Oversee testing campaigns to quantify impact of radiation on material properties Lead strategic projects to expand capabilities Perform literature reviews on radiation effects on materials of interest and distill the information into summaries for non-nuclear engineers Operate in an environment with obstacles and changing requirements. Balance risks without compromising the delivery Partner with other internal Helion teams, external vendors, national laboratories, and universities to gather the required capabilities. Develop your network and represent Helion at technical meetings and conferences Required Skills: A professional understanding of radiation effects on materials, typically demonstrated by a degree in nuclear engineering, materials science, physics, or related discipline and 15+ years of hands-on work 15+ years of experience handling radioactive material 8+ years of experience working on non-aqueous corrosion and environmentally assisted degradation mechanisms (e.g., stress corrosion cracking, creep, accelerated fatigue) 8+ years of experience working on neutron interactions leading to e.g., material transmutation or helium bubble generation 8+ years of experience performing data analysis with a common coding language (Python, MATLAB, C++), data presentation, technical communication, and writing Data presentation should include rigorous consideration of uncertainty and statistics #LI-TM1 #LI-Onsite Total Compensation and Benefits Helion's compensation package includes a competitively benchmarked base salary, meaningful equity grants, and comprehensive benefits. Final compensation is determined through a holistic evaluation of your experience, qualifications, and our commitment to internal equity - ensuring fairness and transparency across our teams. We are committed to fostering a fair and equitable environment in every aspect of our operations, including compensation. This is an exempt salaried role. Annual Base Pay $264,000 - $317,000 USD Benefits Our total compensation package includes benefits, including but not limited to: • Medical, Dental, and Vision plans for employees and their families • 31 Days of PTO (21 vacation days and 10 sick days) • 10 Paid holidays, plus company-wide winter break • Up to 5% employer 401(k) match • Short term disability, long term disability, and life insurance • Paid parental leave and support (up to 16 weeks) • Annual wellness stipend Helion is an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need assistance or an accommodation during the interview process, please let us know.

We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. Since Helion's founding in 2013, we have raised over $1 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors SoftBank and Lightspeed to propel us forward. Our last prototype, Trenta, completed 10,000 high-power pulses and reached plasma temperatures of 100 million degrees Celsius (9 keV). We are now operating Polaris, our next prototype on the path to the world's first fusion power plant. This is a pivotal time to join Helion. You will tackle real-world challenges with a team that prizes urgency, rigor, ownership, and a commitment to delivering hard truths - values essential to achieving what no one has before. Together, we will change the future of energy, because the world can't wait. What You Will Be Doing: You will play a key role in developing designs and materials suited for high-radiation environments, providing analysis and guidance to engineers on the behavior and performance of a wide range of materials under radiation exposure. In this onsite role, based at our Everett, WA office, you will report to the Director of Materials Science and collaborate closely with cross-functional teams to advance Helion's mission. You Will: * Advise engineering design decisions based on radiation effects (due to neutrons) on materials used within the radiation shield vault, e.g., metals used in magnet coils, dielectrics used for structure, and ceramics * Partner with neutronics engineers to predict dpa, analyze, model, and predict macroscopic effects on material properties including thermal conductivity, electrical resistivity, and mechanical strength. Assess system-level radiation risk * Oversee testing campaigns to quantify impact of radiation on material properties * Lead strategic projects to expand capabilities * Perform literature reviews on radiation effects on materials of interest and distill the information into summaries for non-nuclear engineers * Operate in an environment with obstacles and changing requirements. Balance risks without compromising the delivery * Partner with other internal Helion teams, external vendors, national laboratories, and universities to gather the required capabilities. Develop your network and represent Helion at technical meetings and conferences Required Skills: * A professional understanding of radiation effects on materials, typically demonstrated by a degree in nuclear engineering, materials science, physics, or related discipline and 15+ years of hands-on work * 15+ years of experience handling radioactive material * 8+ years of experience working on non-aqueous corrosion and environmentally assisted degradation mechanisms (e.g., stress corrosion cracking, creep, accelerated fatigue) * 8+ years of experience working on neutron interactions leading to e.g., material transmutation or helium bubble generation * 8+ years of experience performing data analysis with a common coding language (Python, MATLAB, C++), data presentation, technical communication, and writing * Data presentation should include rigorous consideration of uncertainty and statistics #LI-TM1 #LI-Onsite Total Compensation and Benefits Helion's compensation package includes a competitively benchmarked base salary, meaningful equity grants, and comprehensive benefits. Final compensation is determined through a holistic evaluation of your experience, qualifications, and our commitment to internal equity - ensuring fairness and transparency across our teams. We are committed to fostering a fair and equitable environment in every aspect of our operations, including compensation. This is an exempt salaried role. Annual Base Pay $264,000-$317,000 USD Benefits Our total compensation package includes benefits, including but not limited to: * Medical, Dental, and Vision plans for employees and their families * 31 Days of PTO (21 vacation days and 10 sick days) * 10 Paid holidays, plus company-wide winter break * Up to 5% employer 401(k) match * Short term disability, long term disability, and life insurance * Paid parental leave and support (up to 16 weeks) * Annual wellness stipend Helion is an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. If you need assistance or an accommodation during the interview process, please let us know.