Maintenance electrician jobs in South Elgin, IL - 1,177 jobs

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. If you are a current associate of Primo Brands, please apply via my ADP. Factory Location: Woodridge, IL Compensation: $41.03 / hour 6-8% shift differential paid for applicable hours worked Shift: Sunday - Thursday 9pm - 5:30am Ability to work holidays and weekends per business needs Responsibilities: Skills Required Performs routine preventative and corrective maintenance and testing on equipment Perform maintenance tasks to include - repairing and improving, from minor rebuilds to major overhauls on all equipment. Identify processing waste reduction opportunities and assist in reduction projects. Participate in preventative maintenance program to help reduce costs of operations through PM optimization. Dismantles, cleans, repairs and tests electrical, electronic and mechanical components to determine component-level failure Support equipment installations, retrofits and upgrades to include vendors and contractors Communicate, coach and train employees to continuously improve team's ability to respond to equipment failures and loss of production. Actively support NCE through SLC DOR, DER, GSTD's - DMAIC projects and Debriefs or shift handoffs Maintains preventative maintenance logs and accurate records of all testing and repairs Recommends equipment to be included in preventive maintenance programs. Perform Preventative Maintenance task to identify all potential mechanical and electrical issues with equipment throughout the plant. Rebuild worn-out, but reusable, pieces of equipment, such as gearboxes for scheduled PM's. Troubleshoot/ investigate and repair all mechanical, electrical, pneumatic, and utility systems including chillers, air compressors etc. Eliminates problems from recurring utilizing the Breakdown Analysis process Communicates directly with equipment suppliers, contractors and vendors as necessary Areas of responsibility will include but are not limited to -Production support - Mechanical Room- Water Processing - Boiler Room -Waste Water Treatment- Water Chemical Treatment Program Qualifications: Qualifications Three or more years proven maintenance experience in a manufacturing environment Prior experience with high and low pressure compressors, chillers, water treatment, boilers is preferred Strong technical knowledge of compressed air systems (pneumatics), electrical systems, hydraulics and water processing is preferred Knowledge of bottling equipment, PM programs and SAP system preferred Successfully demonstrates strong mechanical abilities Strong communication and interpersonal skills for interaction with all employees. Must have electrical knowledge of single and three phase power including the ability to diagnose and replace electric motors Must be able to work and accomplish projects with little to zero supervision Must be able to foster and build a team-work environment Communicate effectively with various support groups, supervisors, and team members Maintain a high level of professional and organizational ethics and image with all plant and outside personnel Able to read, interpret and analyze computer generated reports Perform all tasks with extreme accuracy Must be able to do physical inspections, (i.e. climbing, reaching, extending) Must be proficient with mechanical drawings and OEM technical prints for parts identification Proficient computer navigation skills, including the use of Microsoft Office applications Available for call-ins or to cover all shifts to support production teams as required Works together with Safety department to achieve a zero injury workplace Must display a positive mental attitude and be open to a fast paced ever changing work environment Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members. Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law.

Find your calling at Mercy!This is a highly skilled position requiring advanced knowledge of electricity, plumbing, and movable equipment. The skills required for this position will allow the incumbent to resolve repair issues independently with little to no supervision. This position will support large hospital campuses. The Maintenance Mechanic III provides the necessary skill to operate, maintain, and repair various electrical/plumbing systems and movable equipment. Utilizes exceptional customer service and communication skills. The purpose of this position is to ensure a safe working environment and support an exceptional Environment of Care for Mercy. Position Details: Minimum Required QualificationsEducation: NoneLicensure: Must maintain a valid drivers license Experience: 4 or more years commercial experience working with any of the following equipment: Electrical, plumbing, pneumatic tube systems, beds, wheelchairs or stretchers.Certification/Registration:Other Skills and Knowledge:- Requires oral and written communication skills to communicate with customers and follow instructions. - Verbal ability required to read and understand technical manuals. - Numerical ability required to make calculations for testing, installation, measurement, estimation and repair of equipment.- Ability to prioritize work assignments, conceptualize and formulate finished product.- Form perception is required when measuring and installing parts and equipment. - Spatial ability required to understand forms and relationships when working from blueprints or specifications.- Requires knowledge and use of various computer software such as Outlook, TMS and or Nuvolo.- Ability to manage time and materials efficiently. Completes work assignments in a high-quality manner and the lowest cost to Mercy.- Requires exceptional customer service skills and ability to achieve department goals.- Requires general manual dexterity, basic math knowledge, and mechanical aptitude.- Exposure to extreme temperatures, electric shock, and loud noise.Preferred QualificationsEducation: High school diploma or equivalent preferred. 2 or more years of training in a Technical or Vocational School.Licensure: Electrical and/or PlumbingExperience: 5 or more years working in a facility maintenance position within a healthcare environment Certification/Registration: ASSE 6040 training for medical gas maintenance Other Skills and Knowledge: Why Mercy? From day one, Mercy offers outstanding benefits - including medical, dental, and vision coverage, paid time off, tuition support, and matched retirement plans for team members working 32+ hours per pay period. Join a caring, collaborative team where your voice matters. At Mercy, you‘ll help shape the future of healthcare through innovation, technology, and compassion. As we grow, you‘ll grow with us. By applying, you consent to your information being transmitted by College Recruiter to the Employer, as data controller, through the Employer's data processor SonicJobs. See Mercy Terms & Conditions at about/legal-notices/ and Privacy Policy at about/legal-notices/ and SonicJobs Privacy Policy at us/privacy-policy and Terms of Use at us/terms-conditions

Crown CAPP is seeking an experienced Industrial Electrician. This position will troubleshoot, repair, replace, maintain electrical/ systems for production related equipment and building utilities within a high-speed metal packaging manufacturing facility. This is an hourly position in high-speed, high-volume manufacturing environment where compliance to all safety policies, procedures and regulations is our way of doing business. We are looking for team-oriented individuals who are committed to customer quality, continuous improvement and achieving World Class Performance. Hourly Rate: $40.00/hr Primary Hours/Shift: 3rd Shift (10:00pm - 6:30am) Day to day responsibilities will include the following: Perform preventive maintenance inspections on production equipment as needed and assigned Assist in developing related preventive maintenance that do not currently exist. Troubleshoot of circuits as required to repair, adjust, calibrate, replace, modify electrical components and devices of production equipment. Knowledge of the requirements and use of Lockout Tagout. Knowledgeable of and conform to the requirements of NFPA70E, Arc Flash. Other duties as assigned. Job requirements: The successful candidate will possess the following skills and knowledge: High School Diploma or GED required. 5+ years of experience as a Maintenance/Industrial electrician in a manufacturing environment highly preferred. Experience troubleshooting and repairing of high-speed manufacturing equipment. Electrical, electronic, pneumatic & mechanical knowledge, comprehension, and skills Troubleshooting ability of AC/DC control circuits 120/240 VAC and 440 VAC single and three phase power circuits Knowledge of and ability to troubleshoot variable frequency drives, AB Power Flex 40, 525 & Control Techniques An understanding of ladder logic AB RS Logics 5, 500, & 5000 Knowledge of and ability to troubleshoot Programmable Logic Controllers (PLCs) - Allen Bradley PLC 5, SLC 500, Compact Logics Must be able to comprehend and comply with all OSHA and company safety and electrical regulations including Lock Out / Tag Out, and Arc Flash protection Use of hand tools, Multi-meters Analog & Digital, ammeters, amp probes Ability to read and understand manuals, prints and electrical schematics Good communication and basic computer skills Planning and organizing skills Physical requirements: Work from ladders, lifts, catwalks above floor level (4-10 feet); occasionally at ceiling height (20+ feet) Frequent standing, walking, climbing, reaching, bending, squatting, & reaching above shoulder level Pushing, pulling, and lifting requirements: 25+ pounds. Good Color vision Exposure to high levels of noise (hearing protection required in plant area)

Electrician Salary:45.90/hr **UNION PLANT** Shift: 3rd shift This position will trouble-shoot, repair, program, replace, maintain, and install electrical/electronic systems for production related equipment and building utilities within this high-speed state-of-the-art metal packaging manufacturing facility. Equipment includes packaging machinery. Responsibilities include following all local, state and federal electrical codes. Documentation of problems and maintenance of equipment and facility systems are also required. This position will also provide training for equipment operation and safety precautions. Responsibilities also include installing and maintaining new and existing electrical wiring within the facility. Job Requirements A high school graduate or equivalent with 4+ years working experience in a manufacturing setting (high-speed manufacturing is preferred). An Associates/technical degree is preferred or a related vocational/technical certification (state electrical license, journeyman license, etc.). Knowledge of Allen Bradley/Omron/Direct Logic PLC's are required as well as integrated Window software to analyze AC/DC, single phase and 3 phase generators and AC/DC motors, relays, switches, breaker transformers, and power panels. Knowledge of single and 3-phase up to 440 volts. This position also requires the individual to be able to read and interpret mechanical blueprints, electrical schematics, and parts specifications. Effective and proven communication skills working in a team environment.

The Senior Electrician supports both foundry and machining operations by performing advanced maintenance and repair of electrical, PLC, robotic, CNC, and automation systems. This role emphasizes safe practices, expert troubleshooting, and independent execution of complex technical tasks. The Senior Electrician is expected to apply strong technical knowledge, mentor junior staff, and contribute to efficient and reliable plant operations. Key Responsibilities · Work safely with 24VDC, 120VAC, 480VAC, and 13.8kVA systems. · Use multimeters and other diagnostic equipment. · Rack the breakers for the plant's main substation as required. · Troubleshoot, repair, and maintain electrical components of foundry and machining equipment, including furnaces, conveyors, sand systems, mold-making machines, casting equipment, lathes, drills, mills, CNCs, and robotics. Installation & Wiring · Lead installation, wiring, and repairs of motors, drives, sensors, relays, and control systems. · Install, configure, and maintain Variable Frequency Drives (VFDs). · Install and troubleshoot soft starts for motor applications. · Work with 4-20mA analog devices for process control. · Bend and install rigid conduit for new or modified systems. · Build and modify electrical panels and control systems as needed. Troubleshooting & Diagnostics · Independently troubleshoot and repair electrical, PLC, CNC, and robotic systems to minimize downtime. · Connect to and navigate PLC programs at the PLC or over the network. · Perform minor PLC program changes such as toggling bits, forcing inputs/outputs, or adding jumper logic. · Jog robots and move CNC equipment safely without assistance. · Review robot programs and follow program movements step-by-step in single-step mode. · Read, interpret, and update electrical schematics and technical documents. Maintenance & Safety · Conduct advanced inspections, identify root causes of issues, and implement corrective actions. · Perform preventive maintenance tasks and ensure documentation in the Computerized Maintenance Management System (CMMS). · Ensure compliance with OSHA, NFPA, NEC, and company safety standards, including proper PPE usage. · Support emergency electrical and automation system repairs to minimize production disruptions. · Provide guidance and mentoring to Junior Electricians and maintenance staff. Qualifications & Skills · High school diploma or equivalent; technical or trade school training in electrical systems required, associate degree preferred. · Strong knowledge of electrical systems, troubleshooting techniques, and industrial wiring. · Proficiency with electrical testing equipment, including multimeters and circuit testers. · Ability to connect to PLCs and make minor program changes. · Familiarity with CNC and robotic systems, including the ability to jog, move, and review programs. · Ability to read and understand electrical diagrams, schematics, and technical manuals. · Strong computer skills for maintenance recordkeeping, PLC connections, and reporting. · Strong attention to detail and ability to follow safety protocols. · Team-oriented with strong communication and leadership skills. · Ability to work in a physically demanding environment, including lifting up to 50 lbs, standing for long periods, and working in hot, dusty, and noisy conditions. · Flexibility to work different shifts, weekends, and overtime as needed. Preferred Qualifications · Extensive experience in industrial electrical maintenance, especially in foundry or machining environments. · Experience working with electrical systems up to and including 480V three-phase and supervised work with 13.8kVA. · Knowledge of NFPA 70E electrical safety procedures. · Proficiency with robotics, CNC, and PLC systems. · Forklift or aerial lift certification is a plus. Work Environment This position requires working in both foundry and machine shop environments with exposure to high temperatures, molten metal, electrical systems, coolant, dust, noise, and heavy machinery. Proper PPE must be worn at all times, including: · Hard Hat · Eye Protection · Ear Protection · Steel-Toe Boots · Arc Flash PPE as required · Insulated Gloves (when working with live electrical components)

medmix is a global leader in high-precision delivery devices. We occupy leading positions in the healthcare, consumer, and industrial end-markets. Our customers benefit from our dedication to innovation and technological advancement that has resulted in over 900 active patents. Our 14 production sites worldwide, together with our highly motivated and experienced team of nearly 2'600 employees provide our customers with uncompromising quality, proximity, and agility. medmix is headquartered in Baar, Switzerland. Our shares are traded on the SIX Swiss Exchange (SIX: MEDX). **************** Key Responsibilities: Lead, coach, and supervise the maintenance department to ensure safe and efficient equipment operation Plan and execute preventive and predictive maintenance programs Troubleshoot high-speed production equipment, including injection molding, blow molding, and auxiliary systems Optimize uptime, reduce downtime, and support continuous improvement initiatives Manage departmental budgeting, inventory, and external vendor relationships Ensure compliance with OSHA, EPA, and other relevant safety and regulatory standards Read, comprehend, and interpret complex instructions and to write reports Ability to work with complex mathematical concepts Ability to utilize telephones and computer hardware and office software to include, word processing, spreadsheet, and presentations Ideal Candidate Profile: 5+ years in a maintenance leadership role within plastics, packaging, and high-volume manufacturing Strong knowledge of electromechanical systems, pneumatics, hydraulics, and PLCs Experience with CMMS systems and lean manufacturing principles Proven ability to lead technical teams and drive operational excellence Excellent communication and problem-solving skills What We Offer A vibrant, fast‑moving culture where new ideas are encouraged and celebrated Real growth opportunities within a globally successful business that's scaling rapidly Up to three weeks of PTO in your first year, plus 12 paid company holidays A comprehensive benefits package including medical, dental, vision, Life/AD&D, Short‑ and Long‑Term Disability, and optional Identity Theft and Legal Protection Employee Savings Plan / 401(k) with a 100% employer match up to 6% of your base salary Additional non‑elective 401(k) contributions paid quarterly Health Savings Account with dollar‑for‑dollar company matching based on coverage level Flexible Spending Account (FSA) options Employee Assistance, Health & Wellness Programs to support your well‑being Flexible working hours and a hybrid on‑site/home‑office model Access to exclusive discounts on shopping, entertainment, and lifestyle perks A workplace committed to diversity, inclusion, and equal opportunity If you're driven, curious, and ready to make an impact, this is your moment. Join us and accelerate your career. All information will be kept confidential according to EEO guidelines.

Responsibilities: · Performs maintenance management by supervising maintenance personnel and establishing priorities in maintenance schedules. · Manages, maintains, and establishes maintenance procedures for production lines in a food manufacturing environment to ensure production meets or performs better than budget. · Maintains manufacturing assets and facility, oversees parts inventory, and monitors spending, purchase orders, and invoice approvals. · Sets and maintains departmental budget by reviewing financial statements, and by monitoring line efficiencies, labor costs, and other expenses. · Manages maintenance personnel by setting direction and priorities, and by providing training and continuous development for all Maintenance personnel. · Provides formal Performance Evaluations on direct reports at least twice a year, with regular touch-bases and feedback conversations throughout the year. · Verifies quality of technical work force by his/her direct reports, and provides feedback as needed, holding all Maintenance personnel accountable to technical standards of their work. · Drives the Maintenance and Reliability/TPM initiative focused on Preventive & Predictive Maintenance. · Coordinates work with outside contractors as needed, providing project management, ensuring safety of personnel, and performing other duties as required. · Participates in designing and developing production capacities and capability by attending engaging in planning and coordinating with Engineering, Plant Management and other functions. · Ensures the health, safety, cleanliness, and security of the work environment. · Participates in special projects and duties as needed. Required Skills and Experience: · High School diploma or GED; Bachelor's degree in Engineering or a Technical field preferred · 5+ years' experience in a similar managerial maintenance role, with strong technical, mechanical, maintenance and/or engineering experience · 4+ years of supervisory experience · Demonstrable knowledge of maintenance disciplines - electricity, electronics/automation (PLC), lubrication, mechanical transmissions · Must be able to work a flexible schedule. Preferred Skills and Experience: · TPM and Autonomous Maintenance experience is highly desired · Experience with Lean or Six Sigma · Food and/or beverage manufacturing experience · Computerized Maintenance Management System experience · Working knowledge of national, state, and local regulatory requirements in the areas of food safety, safety, environment and emergency management. Top 3 Must‑Have Competencies for This Maintenance Manager Role 1. Strong Technical & Maintenance Expertise (Hands‑On + Systems Knowledge) This role is deeply technical. The manager must understand: • Electrical, mechanical, lubrication, and automation/PLC systems • Preventive & predictive maintenance • Maintenance procedures for production lines in a food manufacturing environment • CMMS usage and asset management Without this foundation, they can't lead the team, verify work quality, or drive reliability improvements. 2. Proven Leadership & People Management Skills The job is as much about leading people as it is about maintaining equipment. Critical expectations include: • Supervising and developing maintenance personnel • Setting priorities and direction • Conducting performance evaluations and giving ongoing feedback • Holding the team accountable to technical standards • Coordinating contractors and cross‑functional partners This is a leadership-heavy role, not just a technical one. 3. Maintenance Strategy & Operational Excellence Mindset This role isn't just fixing machines-it's driving performance. The manager must be able to: • Lead TPM, reliability, and continuous improvement initiatives • Manage budgets, spending, and efficiencies • Ensure production meets or exceeds targets • Understand Lean/Six Sigma principles • Maintain safety, compliance, and regulatory standards

This role would be for a 3rd shift Electrical Technician and plays a key part in supporting operations through expert troubleshooting, repair, and installation of electrical systems and automated equipment and ensuring the reliability and performance of production systems, working closely with management and maintenance teams. Key Responsibilities: • Troubleshoot and repair electro-mechanical systems with minimal supervision • Support installation and startup of new equipment • Perform preventive maintenance on automated material handling systems • Work with Allen Bradley PLCs, VFDs, HMIs, and 480V electrical systems • Interpret technical documents including blueprints, schematics, and manuals • Collaborate with cross-functional teams to ensure equipment uptime and safety • Follow all safety protocols including Lockout/Tagout, and GMP's Qualifications: • High School Diploma or GED required • 8+ years of industrial electrical experience • 3+ years of PLC programming experience (RSLogix 500, Studio 5000) • Proficient with FactoryTalk View Studio, VFDs, HMIs, analog sensors, and 480V systems • Strong skills in electrical control wiring and panel assembly • Strong communication skills and ability to work independently and collaboratively • Willingness to work overtime and flexible hours as needed Salary Range: $30hr-$40hr Benefits: Bonus Offered Health, dental, and vision, life, short/long term disability insurance 401(k) offering Paid sick leave where applicable by state law (40 hours). LHH is a leader in permanent recruitment-and in the placement of top talent. Our areas of specialty include office administration, customer service, human resources, engineering, and supply chain and logistics. Please feel to check us out and apply for other opportunities if this role isn't a perfect match. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit *************************************

The Maintenance Manager plays a key leadership role overseeing all aspects of facility and equipment maintenance within a food manufacturing environment. This includes planned and unplanned maintenance for production equipment, material handling systems, and, where applicable, fleet operations. The position is responsible for implementing preventive, predictive, and urgent repair strategies to maximize equipment reliability and operational efficiency. Ideal candidates will have strong leadership capabilities, deep technical knowledge of manufacturing systems, and experience managing multi-shift maintenance teams. Key Responsibilities Ensure compliance with all safety standards and regulations (OSHA, NFPA, NEC, etc.), including maintaining an effective lockout-tagout program. Lead and manage maintenance operations for production equipment, utilities, material handling systems, and facility infrastructure. Collaborate with operations to improve safety, food quality, and equipment reliability. Provide coaching and technical guidance to maintenance staff; support succession planning and talent retention. Manage staffing schedules, including coverage for multiple shifts, weekends, and emergency response situations. Oversee performance management, including reviews, coaching, and disciplinary actions. Drive continuous improvement using KPIs, root cause analysis, and reliability methodologies. Lead capital projects from proposal through commissioning, including budgeting and contractor management. Utilize CMMS for work order management, preventive maintenance scheduling, and inventory control. Manage departmental budgets for repairs, spare parts, and capital projects. Ensure compliance with inspections and audits for refrigeration, fire suppression, electrical systems, and process utilities. Coordinate third-party vendors for specialized maintenance and repairs. Qualifications Education: Required: High school diploma or GED Preferred: Bachelor's degree in engineering or technical discipline; technical trade school training Experience: Required: 7+ years leading maintenance teams in a food manufacturing environment 10+ years in equipment/facility maintenance and repair Experience with project management, budgeting, and CMMS systems Strong knowledge of electrical systems, PLCs, and mechanical troubleshooting Preferred: Familiarity with USDA, FDA, and SQF standards Experience with Lean Manufacturing and TPM programs Certifications: Required: Valid driver's license; ability to obtain Powered Industrial Equipment Certification Preferred: Electrical safety training; refrigeration certifications (RETA CARO/CIRO for ammonia systems) Technical Skills: Proficiency in Lean practices (5S, visual controls, standard work) Expertise in equipment reliability and diagnostic techniques (vibration, oil, ultrasonic, thermographic analysis) Strong leadership, communication, and problem-solving skills Ability to manage budgets, projects, and compliance requirements Computer proficiency (Microsoft Office, CMMS)

Day Shift: 6:00am-2:30pm Reporting to the Manufacturing Engineer, the Industrial Maintenance Tech will be responsible for shift support for all electrical/mechanical problems that might arise with equipment/facilities as well as completing all predictive and preventative maintenance work. This position would also be responsible for all machine management and maintenance across the fabrication department and would lead special projects to both equipment/facilities and systems development. Essential Duties and Responsibilities include the following, as well as other duties may be assigned. Follow all safe work practices and procedures. Wear all prescribed personal protective equipment. Ensure all proper lockout/tag out procedures are followed. Provide shift support for all electrical/mechanical and technical problems Install, maintain, remove, troubleshoot, and diagnose a wide variety of electrical/mechanical equipment and components used in manufacturing process. Troubleshoots, repairs, and maintains a variety of production machinery and equipment including electrical, mechanical, hydraulic, and pneumatic systems and parts. Installs, modifies, and relocates machinery and equipment and performs fabrication, welding, mechanical, electrical, electronics, plumbing, carpentry, or other maintenance skills. Repairs and modifies buildings and plant systems as required. Troubleshooting and repair of components such as rolls, shafts, bearings, drive belts, drive chains and gear boxes utilizing basic mechanics hand and power tools Troubleshooting and repair of pumps, valves, and piping systems to include installation of coper pipes or PVC pipes. Reads and interprets manuals, schematics, blueprints, drawings, and other written installation and repair instructions Identify and complete predictive and preventative maintenance work and weekly mechanical press inspections Machinery includes NC Turret Presses, Waterjet, Press Brakes, Routers, Welders, Drill Presses, and hand power tools. Manage backlog of work orders. Maintain Maintenance Area tools and equipment. Maintain and organize all toolboxes, workspaces, and maintenance specific equipment. Perform other duties as required to maintain or improve plant reliability. Conduct daily safety risk assessments on routine and non-routine job tasks. Lead systems development work such as standard work, training, and housekeeping initiatives throughout the plant. Travel: Minimal; less than 5% Qualifications & Experience: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High School or GED education required (Diploma or GED). 3+ Years of Mechanical experience in an industrial environment. Bilingual in English and Spanish is preferred. Machining and fabrication experience. High level experience troubleshooting manufacturing equipment. Welding, machining, and fabrication skills. Demonstrated skill in working with conveyors, mechanical drive systems (gearboxes, sheaves, pulleys, belts, bearings, sprockets, and chains), pumps, hydraulics, and pneumatics. Ability to perform precision tasks including alignments using lasers, dial indicators, etc. Physical Demands The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 25 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Plant Environment This position operates in a manufacturing setting and can be subject to extreme cold and hot temperatures; uneven walking surfaces with cords, tools, and other obstacles; intermittent loud noises; and dusty or dirty conditions. Required PPE includes: Hard hat (when required), safety glasses, earplugs, steel toe/composite boots, cut sleeves/cut resistant gloves and fall protection. Education and/or Experience

Maintenance Manager (Hands on) Industrial Products Manufacturer Days, Monday - Friday $110,000 - $140,000 North Chicago area About the Role My client, an industrial products manufacturer, is seeking a motivated Maintenance Manager with strong mechanical skills and leadership experience. You'll oversee maintenance teams, preventive maintenance, and equipment reliability in a fast-paced environment. Key Duties Lead and supervise a team of 6 Maintenance Technicians Hands on position, mechanical and electrical troubleshooting and repair Plan, schedule, and prioritize daily and preventive maintenance activities Ensure timely troubleshooting and repair of all industrial process equipment Maintain accurate maintenance and repair documentation Manage inventory of critical spare parts and maintenance supplies Oversee installation and alignment of pumps, motors, and drive systems Support and enforce all safety programs and compliance standards Coordinate with production and engineering teams to minimize downtime Develop and track KPIs to improve equipment reliability and maintenance efficiency Participate in capital projects, upgrades, and equipment improvements Qualifications Minimum 5+ years of maintenance experience in an industrial or manufacturing plant 2+ years of leadership or supervisory experience preferred Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems Proficient in troubleshooting 480V 3-phase power and 120V control circuits Ability to weld, fabricate, and use industrial hand and power tools Solid understanding of preventive maintenance programs and CMMS software How To Apply Contact: Sam Wild ************ or ************************ Job reference number: 2542 If you would like to find out more, simply click apply. This position is commutable from Chicago, Cicero, Skokie, Elmhurst, Northbrook, Park Ridge, Des Plaines, Mt. Prospect, Wheeling, Bridgeview, Oak Park, Park Ridge. Relevant Job Title: Maintenance Leader, Industrial Maintenance Leader, Millwright Supervisor, Machine Maintenance Supervisor, Machine Mechanic Lead, and Multi-Craft Technician Lead, Electromechanical Technician Lead, Maintenance Supervisor, Engineering Maintenance Manager, Maintenance Engineering Manager, Engineering Manager, Maintenance Supervisor. All applicants must live in the USA and be eligible to work and live in the USA. Please note, our client is unable to offer Sponsorship or Visa support for this role. Due to the sheer volume of applications, we will only contact successful applications. Therefore, if you have not heard from us within 10 working days, please deem your application as unsuccessful. Axion Recruitment is working as a recruitment agency in relation to this vacancy.

Maintenance Manager (Bilingual - English & Spanish) Shift: 1st Shift | 5:00 AM - 3:00/4:00 PM Salary: $120,000 - $130,000 Benefits: Medical, Dental, Vision, PTO, 401(k) Bilingual in English and Spanish is required Position Overview The Maintenance Manager is responsible for leading all maintenance operations within a manufacturing facility, ensuring equipment reliability, safety, and continuous improvement. This role provides leadership to maintenance supervisors and technicians while driving preventive maintenance strategies that support production efficiency and operational excellence. Key Responsibilities Lead and oversee daily maintenance operations, including preventive maintenance, corrective repairs, projects, and work order execution Develop, implement, and continuously improve preventive maintenance programs to minimize downtime and extend equipment life Manage CMMS/work order systems, prioritize tasks, assign resources, and ensure timely completion Coordinate external contractors and vendors for major repairs and capital projects Promote a strong safety culture through audits, inspections, and employee training Drive process improvements to increase efficiency, reduce costs, and support production goals Oversee spare parts inventory, maintenance documentation, and KPI reporting Coach, train, and develop maintenance supervisors and technicians Qualifications 5+ years of maintenance management experience in a manufacturing environment Strong expertise in preventive maintenance systems; Lean or Six Sigma experience preferred Proficient in Microsoft Office (Excel, Word, Outlook) Fluent in both English and Spanish (required) Strong leadership, organizational, and problem-solving skills

As a Maintenance Technician, you'll be responsible for completing work orders and assisting with the day-to-day upkeep of our apartment community. You'll work directly with residents to resolve maintenance requests submitted through AppFolio, ensuring repairs are handled efficiently and professionally. In this role, you'll handle a wide range of maintenance tasks to keep our community running smoothly. That includes responding to and completing resident work orders through AppFolio, performing repairs on plumbing, electrical, HVAC, appliances, and carpentry as needed, and taking care of routine upkeep like lighting, locks, painting, and general property repairs. You'll also assist with unit turns between residents by handling make-ready repairs and cleaning, troubleshoot and address any emergency maintenance issues (with possible on-call rotation), and help maintain an organized inventory of tools, supplies, and equipment-all while providing friendly and respectful customer service to residents and coworkers.

Are you looking to grow your career with an innovative, family-owned company that's been a trusted name in the industry for over 80 years? Chicago White Metal Casting (CWM) is an industry leader in die casting and precision manufacturing. The experience expected from applicants, as well as additional skills and qualifications needed for this job are listed below. We are currently hiring for a Maintenance Mechanic. We're seeking a dedicated individual who is passionate about craftsmanship, continuous improvement, and making a real impact. xevrcyc Job purpose: You will be responsible for maintenance, installation, effective evaluation and repair of production equipment and infrastructure.

Build the Function | Lead the Team | Grow Your Career This is an opportunity to step into a high-visibility leadership role at a manufacturing site within a global organization. As Maintenance Manager, you'll have the chance to shape maintenance strategy from the ground up, influence site-wide performance, and grow alongside a company investing in its people, technology, and future. You will lead the maintenance organization and set the standard for safety, reliability, and continuous improvement. You'll own how maintenance is done including designing systems, developing talent, and driving results that matter across safety, quality, delivery, cost, and engagement. Why This Role Is Different: You'll join the site leadership team, with real influence over processes, priorities, and long-term direction. You'll build and evolve maintenance systems rather than inherit rigid, outdated ones. You'll gain exposure to capital projects, automation, and strategic decision-making that support career advancement. You'll work within a global organization that values continuous improvement, internal mobility, and leadership development. What You'll Own: Establish and lead a maintenance strategy that improves equipment reliability and supports uninterrupted production. Partner with operations to plan maintenance activities, outages, and work orders with a strong focus on execution and results. Create, implement, and refine maintenance standards, processes, and KPIs that drive measurable performance gains. Lead continuous improvement efforts. Develop your team through coaching, training, and hands-on leadership; champion structured root-cause problem solving. Collaborate with site leadership on capital planning and lead the installation, startup, and validation of new equipment. Own the maintenance budget and identify cost-saving and efficiency opportunities. Directly manage Maintenance Supervisors and the preventive maintenance function. What Will Help You Succeed: A bachelor's degree, equivalent certifications, or hands-on experience. 5+ years in a manufacturing or industrial environment, ideally with automation. 3+ years leading maintenance in a manufacturing setting. Experience rolling out or improving a CMMS system. Practical knowledge of industrial systems such as hydraulics, pneumatics, conveyors, welding, PLCs, and automation. Comfort working with Microsoft Office. A leadership style focused on trust, accountability, coaching, and talent development. Strong understanding of Lean and continuous improvement methods. The ability to think strategically while staying connected to the floor.

Berkot's Super Foods is seeking a skilled Food Equipment Maintenance Mechanic. The candidate will be responsible for performing preventive maintenance, diagnostics, and repairs on a wide range of commercial food-processing equipment used within Berkot's production, meat, deli, and bakery departments. This role ensures that all equipment operates safely, efficiently, and in compliance with food safety and regulatory standards. The ideal candidate has strong technical expertise, a commitment to safety, and the ability to work effectively in a fast-paced retail environment. Responsibilities Inspect, troubleshoot, and repair commercial food equipment including: Multivac, Reiser, Hobart, VC999, Treif, Marel, and similar machines. Perform preventive maintenance to reduce downtime and extend equipment life. Maintain accurate records of all service and repair activities. Respond quickly to equipment breakdowns across multiple Berkot's store locations. Identify root causes of repeated failures and recommend long-term solutions. Ensure equipment operates according to manufacturer and safety standards. Communicate effectively with store managers, meat/deli department leads, and the maintenance team. Qualifications 2+ years of experience maintaining or repairing commercial food-service or food-processing equipment is highly preferred. Hands-on electrical and mechanical troubleshooting abilities. Familiarity with packaging, slicing, sealing, and processing equipment. Ability to read and understand technical schematics and service manuals. Having a valid driver's license is required. Ability to travel to Berkot's locations in the region. Strong problem-solving skills and ability to work independently. Able to lift 50+ lbs and work in production, cooler, or back-room environments. Job Type: Full-time Work Location: In person What we Offer: Company vehicle or mileage reimbursement Tools, uniforms, and ongoing technical training Growth opportunities within a family-owned company committed to promoting from within Benefits: 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance

Maintenance Mechanic The Mechanic will perform preventative maintenance & emergency repairs to all packaging machinery, striving to improve equipment reliability & quality, as part of the maintenance team. Duties and Responsibilities: Fill out daily log reports, emergency breakdown reports, work orders, and communicate with incoming shifts. Perform machine set up and repair assembly and packaging equipment. Perform preventative maintenance routines on all production equipment. Ability to work on low voltage and 120-480vac equipment, starters, motors, vfd's, sensors, controllers, photo-eyes, etc. Install, debug and stabilize plant equipment as required. Read schematics and blueprints to interpret, diagnose, and troubleshoot electrical and pneumatic issues to properly and safely repair. Perform repairs and upgrades of the machinery and equipment to ensure proper operation. Install electronic parts and hardware, using soldering equipment and hand tools Assist in Production/Maintenance related assignments as needed. Communicate regarding issues and problems solve with Production staff any quality and safety concerns. Perform electrical and distribution lock out/ tag out method steady with customary safety protocol. Record maintenance data as directed by the Maintenance supervisor to monitor equipment performance, i.e. work orders Identify and report equipment concerns to the Maintenance Supervisor. Participate in overtime assignments as required. Mechanic is required to supply their own hand tools and a lockable toolbox. Working in a general manufacturing environment. Perform various other similar and related duties as required by the Plant Manager. Qualifications: Experience in equipment maintenance Experience with Pneumatics, Hydraulics and Electrical Ability to withstand wet, cold (35-40F), humid and hot environments, Must be able to bend, reach, kneel, stand for extended hours, Must be able to climb ladders, Must be able to move heavy objects. Must have experience with the following machines: Tiromat packaging machines & Drake Loaders Meat processing facility knowledge. 5 plus years' experience preferred. PPE/Tools Safety toe footwear Hairnet, beard net (if applicable), bump cap, frock If needed: safety glasses, hearing protection, rubber boots Safety Expected to work continuously in a safe manner, and to encourage others to work in a safe manner Expect to maintain good housekeeping, and report any unsafe conditions Food Safety/Quality Adhere to all GMP's (Good Manufacturing Practices), such as a good hand washing practices and adhering to employee hygiene plan Follow all USDA guidelines Report any issues regarding food safety or quality Disclaimer Statement The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all accountabilities, activities, skills, and knowledge needed to perform the job. Please note that job functions are reviewed periodically and are subject to change based upon company business needs. Bobak Sausage Company is an Equal Employment Opportunity Employer.

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Position: CNC Maintenance Mechanic III Shift: Monday - Friday 7:00am - 4:00pm (Weekends as Needed) Location: Alsip, IL Pay: Starting pay will be $35.00 per hour. This is a full-time hourly position. Sign On Bonus: $2000 About Us: Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Summary: The CNC Maintenance Mechanic is a team member who is efficiently planning, installing, and repairing CNC and manual machines. We're seeking a reliable professional with a strong mechanical aptitude who adheres to safety procedures and ethical standards. A successful candidate will be proficient in blueprint reading, the incumbent collaborates seamlessly, upholding our mission, vision, and values. Responsibilities: • Prioritize and adhere to company safety procedures to ensure the well-being of oneself, co-workers, contractors, customers, and property. • Promote a culture of safety, report unsafe practices, and actively contribute to a secure working environment. • Maintain a clean and safe workplace, in line with preventative maintenance programs. • Prepare and interpret wiring diagrams, schematics, and layouts. • Lead equipment installation, removal, or relocation. • Interpret hydraulic and pneumatic schematics, troubleshoot, and determine repair needs. • Implement Lock Out/Tag Out procedures when servicing machines. • Demonstrate excellence in performing all other assigned duties. Basic Qualifications: • At least 3 (three) or more years of experience working in a manufacturing environment with mechanical, electrical, pneumatic, and hydraulic machines. • At least 3 (three) or more years of maintenance experience, with proven knowledge in CNC and manual machine equipment. • At least 2 (two) or more years of experience troubleshooting and repairing hydraulic and pneumatic circuits, as well as heating, cooling, and general building systems • At least 2 (two) or more years of experience reading and interpreting blueprints, mechanical prints, electrical schematics, and wiring diagrams. • At least 2 (two) or more years of experience utilizing measuring devices such as micrometers, gages, meters, calipers, and other measuring tools. Core Competencies: • Mechanical Aptitude & Technical Skills: Strong understanding and hands-on experience with precision tools, machinery, and industrial processes, with a focus on safety and continuous improvement. • Proven ability to work independently with minimal supervision while fostering a collaborative team environment. • Strong verbal and written communication skills, with proficiency in speaking and reading English. • Strong competency in critical thinking and effective problem-solving within technical or fast-paced environments. Preferences: • HS Diploma or GED Equivalent Preferred Work Arrangement & Physical Requirements: • An onsite industrial manufacturing position, with exposure to noise, heat, cold, fumes, and chemicals. • Ability to lift a maximum of 50 lbs. • Ability to knee, bend, climb a ladder, and work in restricted spaces, walk and stand for long periods of time. • Ability to work in high elevations, i.e., scissor lift. Pay Range: Starting pay will be $23.10 - $35.00 per hour based on experience. This is a full-time, hourly position. The pay range takes into account a wide range of factors that are considered in making compensation decisions including, but not limited to, skills; experience and training; licensure and certifications; and other business and organizational needs. The disclosed pay range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At Ingersoll Rand, it is not typical for an individual to be hired at or near the top of the pay range for their role and compensation decisions are dependent on the facts and circumstances of each case. We are committed to helping you reach your professional, personal and financial goals. We offer competitive compensation that aligns with our business strategies and comprehensive benefits to help you live your healthiest. We are committed to building an inclusive and diverse culture that engages as well as values the different backgrounds and experiences of our employee, which, in turn, spurs innovation, generates creative solutions and enhances our customer relations. Union Relationship: We proudly partner with District No. 8 of the International Association of Machinists and Aerospace Workers with a closed shop, which means that all hourly employees are union members. • New employees are regarded as probationary for the first 60 working days of their employment. • After probation, the employee will join the union with an initiation. • We offer our union employees a full benefit package in alignment with our agreement. Travel & Work Arrangements/Requirements: • This position will be fully based on site based at our Alsip, IL location What we Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit ************* TO APPLY: Please apply via our website to be considered for this position. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Provide maintenance support to the manufacturing floor, including repair and upkeep of presses, auxiliary equipment, and building/grounds. Utilize preventive maintenance programs and work orders to support safe, efficient operations and continuous improvement. Key Responsibilities Complete assigned preventive maintenance and work orders Maintain maintenance inventory and work areas in an orderly manner Perform building and grounds maintenance as directed Report unsafe conditions or equipment issues to supervision Follow quality, safety, and environmental policies and procedures Support compliance with applicable safety and operational standards Carry out reasonable requests from supervision Qualifications High school diploma or GED required Completion of required technical training or journeyman program Ability to work well in a team-oriented environment Work Environment & Physical Requirements Manufacturing / plastic injection molding environment Exposure to noise and temperature variations Ability to stand and walk for extended periods Ability to lift up to 50 lbs occasionally Must be able to safely operate a forklift