Maintenance technician jobs in Raritan, NJ - 1,182 jobs

At InterSolutions, Property Management Staffing is all we do! InterSolutions is a full-service recruiting agency specializing in the property management industry. At InterSolutions, we are dedicated to finding the best permanent fit for our customers, and the best job searching experience for our candidates to land their dream job! We are currently looking to fill a Direct Hire Commercial Maintenance Technician opportunity for a Class A retail and office commercial client in Princeton, NJ . If you're a service oriented Maintenance Technician who is well versed in HVAC, plumbing, electrical, and appliances, apply today! Essential Job Functions for Maintenance Technician: Troubleshoots all property systems, and perform repairs Completes all repairs and work orders as necessary in an office and retail setting Proficiency in electrical and plumbing repairs and troubleshooting Completes and logs all assigned work orders in a timely fashion Drives to individual residential homes to rectify all maintenance issues Provides excellent service to residents Knowledge Skills and Abilities for Maintenance Technician: High school diploma or equivalent HVAC certification preferred Minimum 4 years' experience General knowledge of all aspects of maintenance repair and service Ability to lift up to 60 pounds and climb ladders Valid Driver's License Ability to communicate effectively both in writing and verbally Ability to work day, weekend, and evening hours as required We believe in delivering the highest level of service to our clients and associates every day. If you would like to be a part of our team and meet the above requirements, apply today! EOE

Our client is establishing a state-of-the-art pharmaceutical manufacturing facility in Branchburg, New Jersey, dedicated to producing high-quality sterile injectable IV bag specialty products. They are seeking a skilled, safety-focused Facility Mechanic to support the installation, operation, and maintenance of utility and facility equipment for their new sterile IV bag manufacturing operation. Key Responsibilities: Maintain and repair site utilities and facility systems (HVAC for cleanrooms, clean utilities, boilers, chillers, air/vacuum, effluent treatment) to ensure reliable, compliant operation. Support installation, setup, calibration and qualification of new utility and facility equipment, and help define maintenance plans. Perform routine rounds, inspections and troubleshooting, documenting all work accurately in logs, work orders and the CMMS. Work safely in classified cleanroom areas, following gowning, contamination control, lockout/tagout and other EHS procedures. Partner with Engineering, Manufacturing and Quality on investigations, deviations and continuous improvement, and support plant startup and production needs as required.

A career with Kerry Taste & Nutrition offers you an opportunity to shape how people across the globe view food and beverage while providing you opportunities to explore and grow as your interests do. A career with Kerry Applied Health & Nutrition offers you an opportunity to shape how people across the globe view food and beverage while providing you opportunities to explore and grow as your interests do. With our commitment to a sustainable future, a career with Kerry is something you can feel good about. Where you'll work: Our Bethlehem, PA, location is part of our Liquid Beverage division and specializes in coffee extract and flavorings created for Kerry products and customers! 5000 Township Line Road, Bethlehem, Pennsylvania 18017 Pay Rate/Hourly Rate/shift differential: $34.14 - $40.96 2nd Shift $5k Sign On Bonus Position Overview: This position requires industrial mechanical knowledge, some electrical, including but not limited to the responsibilities listed below. This position reports to the Maintenance Supervisor. Diagnose and repair all machinery and process malfunctions. Must be fluent in mechanical troubleshooting, electrical troubleshooting a plus. Diagnose and repair all mechanical power transmission equipment - knowledge of Gearboxes, mechanical drives, and variable speed applications. Diagnose and repair hydraulic and pneumatic systems - knowledge of cylinders, valves, manifolds, vacuum systems, air filtration, and lubrication devices. Diagnose, repair, and overhaul process pumps, automatic control valves, sensors, positioners, actuators, basic electrical AC/DC troubleshooting, and related systems. Proficient knowledge of bearings, pulleys, chain drives, belt drives, and lubricants standards and applications. Read and decipher mechanical drawings, schematics, and piping diagrams. Minimum Qualifications: Experience in installation and repair of mechanical, electrical, pumps, and valve cluster arrangements required. Experience with VFDs, control systems (PLC's/HMI's), electrical protective devices with some knowledge of calibration procedures and equipment. Skilled in the application and use of mechanical tools, hand tools, and power tools. 480v 3 phase knowledge required. Excellent mechanical troubleshooting ability, electrical a plus. Preferred Qualifications: Knowledge and practice of NFPA 70E preferred. 2+ years' experience and demonstrated history of troubleshooting and repairing equipment (described above), personal/process control computers, programmable logic controllers (PLC), and Networking devices. Allen Bradley and/or Siemens experience preferred. Skilled in the machine shop to machine within specific tolerance using various measuring equipment - i.e. verniers, calipers, depth gauges, etc. Skilled in welding, sanitary welding, pipe fitting, soldering, and rigging is desired The pay range for this position is $34.14 - $40.96 per hour. Kerry typically does not hire an individual at the top or near the top of the range, as we are a pay-for-performance company, and this range is set to continue to reward performance annually while in role. Compensation decisions are dependent on the facts and circumstances of each case. The specific compensation offered to a candidate within the above range may be influenced by a variety of factors including skills, qualifications, experience, and internal equity. Kerry offers a competitive benefits package, including medical, dental, vision, paid time off, a 401(k) plan with employee and company contribution opportunities, Employee Share Plan, Life, disability, and accident insurance, and tuition reimbursement. This job posting is anticipated to expire on 5/2026.

Maintenance Tech opening in Bethlehem, PA 18020 (night shift) 7PM-7AM. This is 3 nights per week one week and 4 nights per week the next - so 4 hours of OT every 2 weeks. 30/HR-35/HR - role is non-exempt. Must have experience with preventative maintenance and be mechanically and electrically savvy. Experience in the plastics space HIGHLY preferred. Key Responsibilities Conduct regular inspections and maintenance of machinery to identify and address any potential issues or concerns. Promptly respond to equipment breakdowns and troubleshoot issues to minimize downtime. Perform repairs on machinery and equipment, including mechanical, electrical, hydraulic, and pneumatic systems. Collaborate with the production team to develop and implement preventative maintenance schedules. Keep detailed records of maintenance and repair work performed, including parts used and costs incurred. Recommend and implement improvements to equipment and processes to enhance efficiency and productivity. Maintain a clean and organized work area, ensuring tools and equipment are properly stored and maintained. Perform mold changes as needed. Perform PM work on molds. Perform machining, milling, and metal fabrication. Other duties as assigned. Qualifications and Skills High school diploma or equivalent. Minimum 2+ years of experience as a maintenance technician, preferably within the plastics industry. Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems. Proficient in conducting diagnostics, troubleshooting, and repairs on industrial equipment. Excellent problem-solving skills and ability to work under pressure in a fast-paced environment. Proven ability to read and interpret technical manuals, schematics, and blueprints. Familiarity with computerized maintenance management systems (CMMS) is a plus. Strong attention to detail and ability to prioritize and multitask effectively. Willingness to work flexible hours, including evenings and weekends, as needed. Strong communication skills and ability to work well within a team environment. Experience with plastics blow molding operations (injection blow molding, extrusion blow molding, etc.) is a plus.

Our global manufacturing client in Morris County is looking for an experienced Maintenance Mechanic with strong electromechanical skills to join their team. This is a long‑standing, stable company offering a reliable and supportive work environment. Responsibilities Perform electrical, mechanical, pneumatic, hydraulic, plumbing, and welding repairs on production machinery. Troubleshoot PLCs and frequency drives. Read mechanical and electrical blueprints. Utilize power tools, Multimeter/Amps meter. Complete preventive maintenance tasks. Maximize machine uptime through proper maintenance and attention to detail. Keep daily logs, PM records, and spare parts inventory updated. Qualifications Technical school diploma, and training in Programmable Logic Control with Electromechanical background preferred. 5+ years of maintenance experience in a manufacturing environment. Flexible to work overtime as needed. Benefit offerings include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State, or local law; and Holiday pay upon meeting eligibility criteria. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ******************************************* The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act • Los Angeles City Fair Chance Ordinance • Los Angeles County Fair Chance Ordinance for Employers • San Francisco Fair Chance Ordinance

📌 Senior Maintenance Technician (Industrial Controls) 📍 Warrington, PA 💰 Competitive Salary + Production Bonuses & Full Benefits 🏭 Advanced Structural Steel Fabrication 🚀 Why This Role Matters: You're not just fixing machines; you're the technical backbone of a state-of-the-art fabrication shop. Your expertise in PLCs and complex machinery ensures the entire operation runs smoothly, turning raw steel into critical components for major projects. This is a hands-on, lead role where your problem-solving skills directly impact production, efficiency, and innovation. 🎯 Key Responsibilities: Perform advanced troubleshooting, repair, and preventive maintenance on structural steel fabrication equipment and industrial control systems. Program, troubleshoot, and maintain PLCs (Allen-Bradley, Siemens), HMIs, and automation equipment. Fabricate and repair structural components using MIG, TIG, and stick welding techniques. Diagnose complex electrical, mechanical, hydraulic, and pneumatic system failures to minimize downtime. Read and interpret technical schematics, electrical diagrams, and structural blueprints. Collaborate with engineering and production teams to implement system upgrades and modifications. Uphold the highest standards of safety and compliance in all maintenance activities. ✅ Ideal Candidate Profile: Must-Have: 5+ years of industrial maintenance experience with a strong focus on PLCs/controls and structural steel fabrication equipment. Expertise in programming and troubleshooting Allen-Bradley or Siemens PLCs and HMIs. Proficient in MIG, TIG, and stick welding, with the ability to read technical blueprints. Strong understanding of electrical systems, pneumatics, and hydraulics. A proactive problem-solver who can work independently and as part of a team. Certifications in welding (AWS), electrical systems, or controls are a significant plus. 💡 The Company & Perks: Earn More: Competitive base salary complemented by production bonuses, rewarding you for your direct impact. Top-Tier Benefits: Comprehensive health insurance, 401(k), and generous paid time off. Growth & Culture: A clear path for career advancement in a dynamic, innovative environment that values and invests in technical expertise. The Right Tools: Work in a supportive team culture with access to the technology needed to excel. Ready to take your technical expertise to the next level? Submit your resume to **************************** or apply online.

One of our large global engineering and manufacturing clients is looking to hire assembly technicians to join their growing team. The Assembler performs routine assembly operations, and subassemblies by using blueprints, drawings, diagrams and written processes. REQUIRED SKILLS AND EXPERIENCE High school diploma -2 years of assembly experience of actual electronics -Previous experience working with design engineering teams -Ability to read mechanical drawings, electrical schematics, and assembly process documentation -Experience routing and terminating cables -Works independently NICE TO HAVE SKILLS AND EXPERIENCE -1-2 years of Electro-mechanical assembly experience -Associates Degree in Electric or Mechanical Engineering Preferred -Military Technical School Training related to Electro-Mechanical Engineering -Certifications in Electro-Mechanical studies from an Accredited Technical/Trade School helpful

If you are looking for a great opportunity to utilize your experience in social services and make a difference in someone's life when they need a helping hand, we have the position for you. The employee in the Income Maintenance Caseworker position is responsible and accountable for determining eligibility for financial assistance, Medicaid, SNAP, LIHEAP, nursing home care, and waivers, as well as any additional programs the Department of Human Services administers for applicants and recipients in accordance with state regulations. Watch this video to see how you can make a difference! DESCRIPTION OF WORK After attending an 8-week Income Maintenance Standard Training Program (IMSTP), you will be completing your job duties in an office-setting environment. Major duties include determining eligibility for financial assistance, Medicaid, SNAP, LIHEAP, nursing home care, and waivers as well as any additional programs the department administers for applicants and recipients in accordance with state regulations. In order to accomplish these duties, you will interview customers either over the phone or in person; review, interpret, and correctly apply policy; data enter information into an automated eligibility determination system as well as perform manual calculations; type clear and thorough case comments about client circumstances and changes. All work must be completed within deadlines in accordance with federal and state policy. Complying with regimented policies and procedures as well as staying current with major changes impacting on knowledge and skill is essential. Job duties are carried out under the general supervision of an Income Maintenance Casework Supervisor. Interested in learning more? Additional details regarding this position can be found in the position description. Work Schedule and Additional Information: Full-time employment, 37.5 hours per week Work hours are 8:30 AM to 5:00 PM, Monday - Friday, with a 60-minute lunch. Your schedule may change based on operational needs. Travel and overtime: As needed Work Conditions: Assigned duties are performed in a controlled office environment. In counties with District Offices, employees may be reassigned to different work sites due to operational needs. Reassignments will be made in compliance with contract language. Telework: This position may be eligible to telework part time. Specific details of the telework schedule will be discussed during the interview process. In order to telework, you must have a securely configured high-speed internet connection and work from an approved location inside Pennsylvania. If you are unable to telework, you will have the option to report to the headquarters office in Bristol, Pennsylvania. The ability to telework is subject to change at any time. Salary: Selected candidates who are new to employment with the Commonwealth of Pennsylvania will begin employment at the starting annual salary of $51,971.00 (before taxes). You will receive further communication regarding this position via email. Check your email, including spam/junk folders, for these notices. REQUIRED EXPERIENCE, TRAINING & ELIGIBILITY QUALIFICATIONS Minimum Experience and Training Requirements: Four years of experience in interviewing or work requiring the analysis and interpretation of data; or A bachelor's degree; or Any equivalent combination of experience and training. Applicants will be considered to have met the educational requirements once they are within 3 months of graduating with a qualifying degree. Other Requirements: You must meet the PA residency requirement. For more information on ways to meet PA residency requirements, follow the link and click on Residency. Hiring preference for this vacancy may be given to candidates who live within Bucks County. If no eligible candidates who live within Bucks County apply for this position, candidates who reside in other counties may be considered. You must be able to perform essential job functions. Legal Requirements: A conditional offer of employment will require submission of criminal history reports. See hiring agency contact information. You must pass a background investigation. This position will have access to Federal Tax Information (FTI) and is subject to the provisions of IRS Publication 1075 (Pub 1075) which requires you to pass an enhanced background check prior to beginning employment. Under Pub 1075, acceptance of a conditional offer of employment will require submission to and approval of satisfactory criminal history reports, including but not limited to: a fingerprint-based federal records check; a PA State Police clearance; a check of local law enforcement agencies where you have lived, worked, and/or attended school within the last five (5) years; and a citizenship/residency verification. How to Apply: Resumes, cover letters, and similar documents will not be reviewed, and the information contained therein will not be considered for the purposes of determining your eligibility for the position. Information to support your eligibility for the position must be provided on the application (i.e., relevant, detailed experience/education). If you are claiming education in your answers to the supplemental application questions, you must attach a copy of your college transcripts for your claim to be accepted toward meeting the minimum requirements. Unofficial transcripts are acceptable. Your application must be submitted by the posting closing date . Late applications and other required materials will not be accepted. Failure to comply with the above application requirements may eliminate you from consideration for this position. Veterans: Pennsylvania law (51 Pa. C.S. *7103) provides employment preference for qualified veterans for appointment to many state and local government jobs. To learn more about employment preferences for veterans, go to ************************************************ and click on Veterans. Telecommunications Relay Service (TRS): 711 (hearing and speech disabilities or other individuals). If you are contacted for an interview and need accommodations due to a disability, please discuss your request for accommodations with the interviewer in advance of your interview date. The Commonwealth is an equal employment opportunity employer and is committed to a diverse workforce. The Commonwealth values inclusion as we seek to recruit, develop, and retain the most qualified people to serve the citizens of Pennsylvania. The Commonwealth does not discriminate on the basis of race, color, religious creed, ancestry, union membership, age, gender, sexual orientation, gender identity or expression, national origin, AIDS or HIV status, disability, or any other categories protected by applicable federal or state law. All diverse candidates are encouraged to apply. EXAMINATION INFORMATION Completing the application, including all supplemental questions, serves as your exam for this position. No additional exam is required at a test center (also referred to as a written exam). Your score is based on the detailed information you provide on your application and in response to the supplemental questions. Your score is valid for this specific posting only. You must provide complete and accurate information or: your score may be lower than deserved. you may be disqualified. You may only apply/test once for this posting. Your results will be provided via email.

Cima specializes in the design, fabrication, and installation of high-quality signage for diverse clients. If you're looking for a job that allows you to be hands on, passionate, and build incredible signs that can turn into an expansive career, we're currently hiring for full-time positions in our Channel Letter department. ESSENTIAL DUTIES & RESPONSIBILITIES: Assist in basic sign production tasks under Supervision. Prepare materials for sign production, including cutting and organizing components. Operate machinery and tools with guidance. Weld, rivet, or bolt components together, primarily aluminum. Maintain a clean and organized work area. Follow safety protocols and quality control procedures. QUALIFICATIONS/REQUIREMENTS: High School Diploma or General Education Degree (GED). Must be mechanically inclined and able to use hand tools, power tools, and heavy equipment. Prefer current and unrestricted driver's license with a clean driving record. Must have the ability to lift and maneuver heavy materials throughout the shop and adjacent outside areas. Ability to work effectively in a team environment. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to stand; walk; work with their hands handle, or feel, whether directly manipulating components or using controls on an assembly machine. Employee must be able to talk or hear over shop noise. Employee must be able to stand for extended periods of time at worktables. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move 50 to 75 pounds and move it for at least 50 feet. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Cima Network is an Equal Opportunity employer. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire, Relocation is not offered. PIdd28d0e6572d-31181-39494352

Full-time Description Cima specializes in the design, fabrication, and installation of high-quality signage for diverse clients. If you're looking for a job that allows you to be hands on, passionate, and build incredible signs, we're currently hiring for full-time positions in our Channel Letter department. ESSENTIAL DUTIES & RESPONSIBILITIES: Ensure products are being built to specification and meeting customers' standards. Operates equipment used to cut, bend, and drill to specified shapes. Operates metal fabricating machines including shears, saws, breaks, bending machines, and punch and forming presses. Weld, rivet, and bold components together, primarily aluminum. Review daily schedule requirements to determine priorities. Maintain a clean and organized work area. Follow safety protocols and quality control procedures. Requirements QUALIFICATIONS/REQUIREMENTS: Must be mechanical inclined and able to use hand tools, power tools, and heavy equipment. High School Diploma or General Education Degree (GED) 1+ years of experience in Sign Production or Related Field. Understanding of different materials used in Sign Production. Prefer current and unrestricted driver's license with a clean driving record. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to stand; walk; work with their hands handle, or feel, whether directly manipulating components or using controls on an assembly machine. Employee must be able to talk or hear over shop noise. Employee must be able to stand for extended periods of time at worktables. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move 50 to 75 pounds and move it for at least 50 feet. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Cima Network is an Equal Opportunity employer. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire, Relocation is not offered.

Job Description At Sibanye-Stillwater Reldan, every role plays a vital part in building a cleaner, more sustainable future. We operate responsibly and efficiently, with a deep commitment to environmental stewardship, safety, and operational excellence. We are seeking a motivated and detail oriented Facilities Maintenance Engineer to join our team. In this hands on engineering role, you will support the safe and reliable operation of our refinery facilities and infrastructure while executing maintenance driven and capital engineering projects that enhance performance, safety, and compliance. If you enjoy solving complex facility challenges, collaborating across teams, and turning engineering concepts into operational reality, this is an opportunity to make a meaningful impact in a company where your work truly matters. Job Purpose To support the safe, reliable, and efficient operation of refinery facilities and infrastructure by providing hands on engineering support and executing facility and maintenance driven capital projects. This role focuses on engineering design support, equipment upgrades, infrastructure improvements, and project execution while ensuring alignment with safety, regulatory, and operational requirements. Key Responsibilities Facility Engineering and Technical Support • Provide engineering support for facility infrastructure, utilities, and production support systems • Troubleshoot complex mechanical, electrical, and control issues beyond routine maintenance • Review engineering drawings, layouts, P and IDs, and technical specifications • Support equipment upgrades, modifications, and facility improvements • Ensure engineered solutions are safe, compliant, and maintainable Capital Project Engineering and Execution • Execute assigned capital and maintenance driven engineering projects from concept through closeout • Develop scopes of work, technical specifications, schedules, and cost estimates • Coordinate contractors, vendors, and internal stakeholders • Oversee installation, commissioning, and project closeout activities • Maintain accurate and complete project documentation Maintenance Engineering Support • Provide engineering support during major repairs, outages, and upgrades • Support repair versus replace evaluations • Improve equipment reliability and maintainability through engineered solutions • Support spare parts standardization and technical documentation Safety, Compliance, and Risk Management • Ensure compliance with OSHA, EPA, and NFPA requirements • Participate in Management of Change, job safety analyses, and hazard reviews • Support audits, inspections, and corrective action implementation • Identify and mitigate engineering related risks Stakeholder and Vendor Coordination • Serve as the engineering point of contact for assigned systems and projects • Coordinate closely with Operations, Maintenance, Safety, and external contractors • Support vendor selection and contractor oversight Continuous Improvement • Identify opportunities to improve facility performance, efficiency, and reliability • Support engineering standards, procedures, and documentation • Apply lessons learned to future projects Qualifications • Bachelor's degree in Engineering Mechanical, Electrical, Chemical, or related discipline, or equivalent experience • Four to eight years of experience in facilities, maintenance, or project engineering within an industrial environment • Demonstrated experience executing capital projects and facility upgrades • Strong knowledge of industrial mechanical and electrical systems • Ability to read and interpret engineering drawings and P and IDs • Proficiency with Microsoft Office applications • CMMS experience preferred • Familiarity with CAD systems is a plus Compliance Requirements • This position requires compliance with ITAR and NAID standards • Candidates must be a US Citizen, US Permanent Resident, or otherwise meet ITAR eligibility • Ability to pass a seven year background check free of theft or fraud related offenses • Must pass pre employment drug screening • Must be medically fit to work in an industrial environment Physical Requirements • Ability to lift, push, pull, or move up to 50 lbs • Ability to stand and walk in an industrial facility for extended periods • Frequent bending, reaching, crouching, and repetitive motions • Required use of PPE in designated areas Schedule Shift: Monday through Friday, standard business hours with flexibility as projects require Location: Onsite Bonus: This position is bonus eligible Benefits • Medical, dental, and vision coverage beginning the first of the month after 30 days • 401(k) with company match after 6 months • Paid vacation, sick time, personal and community days, plus company holidays • Company provided safety shoes twice per year • Bi weekly team lunches and company sponsored events Equal Opportunity Employer Sibanye Stillwater Reldan is an equal opportunity employer dedicated to fostering a diverse and inclusive workplace where every employee feels valued and empowered. Ready to Engineer Impact If you are ready to apply your technical expertise, project execution skills, and commitment to safety to a team that values quality and continuous improvement, apply today. Join Sibanye Stillwater Reldan and help us build a cleaner, safer, and more sustainable future. Powered by JazzHR CA57gOD9kE

Full-time Description Who We Are: Eastern Controls is a family-owned manufacturer's representative located in the suburbs of Philadelphia, PA that provides the best-in-class process control solutions, service and training. With locations in Ashland, VA; Carnegie, PA, and our home base in Edgemont, PA, we collaborate with customers in the Life Sciences, Power, Water & Wastewater, Chemical, Refinery, Food & Beverage, and other process-centered industries across an expanding map of geographies. We're expanding rapidly, technically challenging, and pride ourselves on providing an unrivalled customer experience. If you enjoy a fun, fast-paced company that directly impacts life-sustaining industries and the industrial infrastructure of the United States, apply today. Who We're Seeking: You want to be where the action is! You enjoy working with your hands (sometimes getting them dirty) and thrive in an ever-changing environment. People would describe you as curious, resourceful, dependable and don't shy away from a technical challenge. You enjoy working in a variety of industrial environments (pharmaceuticals, food & beverage, gas/oil/petrochemical, water/wastewater treatment, power, pulp & paper and more) and with a diverse range of people- engineers, technicians, and production personnel. This critical role is responsible for assembly and disassembly, assist with troubleshooting, maintenance, installation, and repairs of the various product lines based on the manufacturer's specifications. Approximately 15% of travel is overnight, primarily in the spring and fall coinciding with plant outages. Education: High school diploma or equivalent; associate degree in technical field preferred. Experience: You have 1-5 years' experience in a hands-on technical application. You should be able to demonstrate basic mechanical and electrical knowledge, use of hand tools and electronic testing equipment, and a strong attention to safety and detail. Prior control valve experience preferred. A strong technical aptitude, safety mindset and attention to detail are crucial. Applicants with any knowledge of electrical and hydraulic actuators and familiarity with pneumatics is a strong plus. Requirements Certifications: Must be able to obtain certifications in all required ECI and Principal programs. Ability to obtain and maintain TWIC and PSM credentials. Forklift, Scissors, lift, and confined spaces certification may also be required. Valid Driver's License and safe driving record. Cultural Fit: Family founded and owned since 1969, Eastern Controls is rooted in strong relationships, technical expertise, and a positive mindset. We work hard, have fun, and treat one another with respect and kindness. Our growth goals aim to serve the myriad of life-sustaining applications we touch, the dedicated customers and manufacturers we partner with, and the employees we call family. Area of Coverage: Eastern PA/ Southern NJ/ Delaware Location: Ideal candidate will live somewhere in Delaware / Chester / Montgomery / Bucks Counties. Travel / Office: Candidate would work primarily out of headquarters in Edgemont, PA, with occasional travel (primarily in the spring and fall coinciding with plant outages). Position Start Date: Immediately. Job Category: Service Job Type: Full Time Job Location: HQ w/ occasional travel. Eastern Controls is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants or employees on the basis of age 40 and over, color, disability, gender identity, genetic information, military or veteran status, national origin, race, religion, sex, sexual orientation or any other applicable status protected by state or local law.

Who We Are: Eastern Controls is a family-owned manufacturer's representative located in the suburbs of Philadelphia, PA that provides the best-in-class process control solutions, service and training. With locations in Ashland, VA; Carnegie, PA, and our home base in Edgemont, PA, we collaborate with customers in the Life Sciences, Power, Water & Wastewater, Chemical, Refinery, Food & Beverage, and other process-centered industries across an expanding map of geographies. We're expanding rapidly, technically challenging, and pride ourselves on providing an unrivalled customer experience. If you enjoy a fun, fast-paced company that directly impacts life-sustaining industries and the industrial infrastructure of the United States, apply today. Who We're Seeking: You want to be where the action is! You enjoy working with your hands (sometimes getting them dirty) and thrive in an ever-changing environment. People would describe you as curious, resourceful, dependable and don't shy away from a technical challenge. You enjoy working in a variety of industrial environments (pharmaceuticals, food & beverage, gas/oil/petrochemical, water/wastewater treatment, power, pulp & paper and more) and with a diverse range of people- engineers, technicians, and production personnel. This critical role is responsible for assembly and disassembly, assist with troubleshooting, maintenance, installation, and repairs of the various product lines based on the manufacturer's specifications. Approximately 15% of travel is overnight, primarily in the spring and fall coinciding with plant outages. Education: High school diploma or equivalent; associate degree in technical field preferred. Experience: You have 1-5 years' experience in a hands-on technical application. You should be able to demonstrate basic mechanical and electrical knowledge, use of hand tools and electronic testing equipment, and a strong attention to safety and detail. Prior control valve experience preferred. A strong technical aptitude, safety mindset and attention to detail are crucial. Applicants with any knowledge of electrical and hydraulic actuators and familiarity with pneumatics is a strong plus. Requirements Certifications: Must be able to obtain certifications in all required ECI and Principal programs. Ability to obtain and maintain TWIC and PSM credentials. Forklift, Scissors, lift, and confined spaces certification may also be required. Valid Driver's License and safe driving record. Cultural Fit: Family founded and owned since 1969, Eastern Controls is rooted in strong relationships, technical expertise, and a positive mindset. We work hard, have fun, and treat one another with respect and kindness. Our growth goals aim to serve the myriad of life-sustaining applications we touch, the dedicated customers and manufacturers we partner with, and the employees we call family. Area of Coverage: Eastern PA/ Southern NJ/ Delaware Location: Ideal candidate will live somewhere in Delaware / Chester / Montgomery / Bucks Counties. Travel / Office: Candidate would work primarily out of headquarters in Edgemont, PA, with occasional travel (primarily in the spring and fall coinciding with plant outages). Position Start Date: Immediately. Job Category: Service Job Type: Full Time Job Location: HQ w/ occasional travel. Eastern Controls is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants or employees on the basis of age 40 and over, color, disability, gender identity, genetic information, military or veteran status, national origin, race, religion, sex, sexual orientation or any other applicable status protected by state or local law.

Are you ready to take your roofing career to new heights? Holencik Exteriors in Coplay, PA is seeking passionate individuals to join our team as full-time Roofing Technicians! Earn up to $25 per hour (depending on experience) plus commission, along with a comprehensive benefits package that includes: Medical, dental, and vision insurance 401K with match Paid vacation time Paid holidays Paid birthdays off Company Cell Phone, and iPad Snowy day fund If you're looking for a rewarding career with a company that values integrity, teamwork, and success, then keep reading! DISCOVER HOLENCIK EXTERIORS Holencik Exteriors is a family-owned and operated company dedicated to serving our customers' roofing needs with honesty, integrity, and care. With over 45 years of experience, we've built a reputation for excellence in the industry. Our mission is simple - to provide exceptional service and quality craftsmanship that our customers can rely on. At Holencik Exteriors, we value teamwork, integrity, and continuous improvement. We believe in supporting our employees and fostering a culture of growth and success. We hope you'll join us! ALL ABOUT THE ROLE This is a full-time position located in Coplay, PA. You'll work Monday through Friday, with occasional weekends as needed. Get ready to enjoy the outdoors and meet new people while making a difference in our community. As a Roofing Technician, you start your morning knowing that you're about to tackle another day of helping homeowners protect their most valuable asset - their homes. Armed with your tools and expertise, you head out to your first job of the day. Whether it's a new installation, a repair, or a maintenance project, you approach each task with precision and dedication. As you work alongside your team members, you take pride in delivering top-notch craftsmanship and exceeding customer expectations. At the end of the day, you drive home knowing that you've made a difference, one roof at a time. ROLE REQUIREMENTS Valid driver's license Goal-oriented with a strong desire to succeed Solid organizational, interpersonal, and communication skills Willingness to maintain a professional appearance High-quality customer service skills Must be comfortable working on a roof of all pitches Comfortable with operating a computer, smartphone, and iPad Desired Qualifications: Excellent verbal skills Good writing skills Professional phone skills An energetic personality The ability to work independently Are you ready to join our team and make a difference? Applying is easy - simply complete our initial 3-minute, mobile-friendly application. We can't wait to hear from you and welcome you to the Holencik family as our new Roofing Technician!

Eastern Lift Truck Co.Forklift Technician Currently, we are seeking an experienced Field Service Technician to support our Reading, PA location and surrounding areas. We offer tremendous opportunity for growth, competitive compensation and benefits for individuals who want a career with a great company that maintains a family feel! Main Duties:Diagnose, repair, inspect, and maintain equipment including Forklifts, Pallet Trucks, Boom Lifts, and Scissor LiftsProvide courteous and professional service Maintain a clean and safe work environment in compliance with Company and OSHA StandardsRequirements:Prior experience repairing forklifts and/or heavy equipment Working knowledge of mechanical, electrical, and hydraulic systems Experience as a road mechanic a plus Welding / fabricating experience Exceptional customer service skill Clean driving record Stable work history Dependable, self-motivated professional Benefits:Company vehicle with fuel card, company cell phone; medical, dental, vision, and prescription plan. 401k with partial company match, paid vacation and sick days, paid holidays, short- & long-term disability, and basic/supplemental life insurance policies. Who is Eastern Lift Truck Co.?Eastern Lift Truck Co., is a family-owned company, celebrating over 50 years strong. We provide sales, parts, rentals and service in all areas of the Lift Truck, Material Handling and Allied product business. At Eastern Lift Truck Co. we know that the employees are the ‘heart and soul' of the company. Find out more at: ************************ “Eastern Lift Truck Co. is an Equal Opportunity/Affirmative Action Employer including Disabled/Vets”

Fraza & Vitan Equipment is looking for an experienced Forklift Technician to repair heavy equipment. You'll service, diagnose, and maintain forklifts and material handling equipment-no two days are the same. Why you'll love it here: Pay range $21-$33 an hour, based on experience and qualifications Weekly pay Company vehicle provided No weekends Medical, dental, vision, & pension What you'll do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What you'll need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Get to know us: Fraza and Vitan Equipment is a full-service material handling business with over 300 skilled employees across Michigan and the East Coast. Our team uses innovative equipment and processes to push your business forward and increase efficiency. We're always on the lookout for talented individuals to join our team and grow their careers in a challenging but positive environment. Take the next step in your career-apply today!

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. * Summary : Under direct supervision, receives, stores and issues tools, dies, materials, parts and equipment. May provide administrative assistance as and when needed. Principal Duties/Responsibilities: · Issues tools, equipment or parts to workers and maintains records issued and returned. · Locates lost or misplaced tools, equipment or parts. · Receives, unpacks, and stores incoming tools, equipment or parts, and requisitions stock to replenish inventory. · Inputs all required data into business operations software, purchasing, and receiving process requirements. · Inspects and tools, equipment or parts for defects and wear and reports damage or wear to supervisors. · Keeps all parts clean and orderly in the proper locations. · Performs clerical activities as directed by manager. · Participates actively in the weekly and monthly team meetings. · May interface with purchasing, receiving, and business operations software; repair, service or lubricate tools and equipment; deliver tools or equipment to workers, manually or using handtruck; mark and identify tools and equipment, using identification tag, stamp, or electric marking tool. Knowledge, Skills, Abilities, & Behaviors Required: · High school diploma or equivalent (GED) and one year related experience; or equivalent combination of education and experience which provides the required knowledge, skills, and abilities. Competencies Required: Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. (****************************************************************************************************** ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here. (******************************************************************************************************

Full-time Description Cima specializes in the design, fabrication, and installation of high-quality signage for diverse clients. If you're looking for a job that allows you to be hands on, passionate, and build incredible signs that can turn into an expansive career, we're currently hiring for full-time positions in our Channel Letter department. ESSENTIAL DUTIES & RESPONSIBILITIES: Assist in basic sign production tasks under Supervision. Prepare materials for sign production, including cutting and organizing components. Operate machinery and tools with guidance. Weld, rivet, or bolt components together, primarily aluminum. Maintain a clean and organized work area. Follow safety protocols and quality control procedures. Requirements QUALIFICATIONS/REQUIREMENTS: High School Diploma or General Education Degree (GED). Must be mechanically inclined and able to use hand tools, power tools, and heavy equipment. Prefer current and unrestricted driver's license with a clean driving record. Must have the ability to lift and maneuver heavy materials throughout the shop and adjacent outside areas. Ability to work effectively in a team environment. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to stand; walk; work with their hands handle, or feel, whether directly manipulating components or using controls on an assembly machine. Employee must be able to talk or hear over shop noise. Employee must be able to stand for extended periods of time at worktables. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move 50 to 75 pounds and move it for at least 50 feet. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Cima Network is an Equal Opportunity employer. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire, Relocation is not offered.

At Sibanye-Stillwater Reldan, every role plays a vital part in building a cleaner, more sustainable future. We operate responsibly and efficiently, with a deep commitment to environmental stewardship, safety, and operational excellence. We are seeking a motivated and detail oriented Facilities Maintenance Engineer to join our team. In this hands on engineering role, you will support the safe and reliable operation of our refinery facilities and infrastructure while executing maintenance driven and capital engineering projects that enhance performance, safety, and compliance. If you enjoy solving complex facility challenges, collaborating across teams, and turning engineering concepts into operational reality, this is an opportunity to make a meaningful impact in a company where your work truly matters. Job Purpose To support the safe, reliable, and efficient operation of refinery facilities and infrastructure by providing hands on engineering support and executing facility and maintenance driven capital projects. This role focuses on engineering design support, equipment upgrades, infrastructure improvements, and project execution while ensuring alignment with safety, regulatory, and operational requirements. Key Responsibilities Facility Engineering and Technical Support • Provide engineering support for facility infrastructure, utilities, and production support systems • Troubleshoot complex mechanical, electrical, and control issues beyond routine maintenance • Review engineering drawings, layouts, P and IDs, and technical specifications • Support equipment upgrades, modifications, and facility improvements • Ensure engineered solutions are safe, compliant, and maintainable Capital Project Engineering and Execution • Execute assigned capital and maintenance driven engineering projects from concept through closeout • Develop scopes of work, technical specifications, schedules, and cost estimates • Coordinate contractors, vendors, and internal stakeholders • Oversee installation, commissioning, and project closeout activities • Maintain accurate and complete project documentation Maintenance Engineering Support • Provide engineering support during major repairs, outages, and upgrades • Support repair versus replace evaluations • Improve equipment reliability and maintainability through engineered solutions • Support spare parts standardization and technical documentation Safety, Compliance, and Risk Management • Ensure compliance with OSHA, EPA, and NFPA requirements • Participate in Management of Change, job safety analyses, and hazard reviews • Support audits, inspections, and corrective action implementation • Identify and mitigate engineering related risks Stakeholder and Vendor Coordination • Serve as the engineering point of contact for assigned systems and projects • Coordinate closely with Operations, Maintenance, Safety, and external contractors • Support vendor selection and contractor oversight Continuous Improvement • Identify opportunities to improve facility performance, efficiency, and reliability • Support engineering standards, procedures, and documentation • Apply lessons learned to future projects Qualifications • Bachelor's degree in Engineering Mechanical, Electrical, Chemical, or related discipline, or equivalent experience • Four to eight years of experience in facilities, maintenance, or project engineering within an industrial environment • Demonstrated experience executing capital projects and facility upgrades • Strong knowledge of industrial mechanical and electrical systems • Ability to read and interpret engineering drawings and P and IDs • Proficiency with Microsoft Office applications • CMMS experience preferred • Familiarity with CAD systems is a plus Compliance Requirements • This position requires compliance with ITAR and NAID standards • Candidates must be a US Citizen, US Permanent Resident, or otherwise meet ITAR eligibility • Ability to pass a seven year background check free of theft or fraud related offenses • Must pass pre employment drug screening • Must be medically fit to work in an industrial environment Physical Requirements • Ability to lift, push, pull, or move up to 50 lbs • Ability to stand and walk in an industrial facility for extended periods • Frequent bending, reaching, crouching, and repetitive motions • Required use of PPE in designated areas Schedule Shift: Monday through Friday, standard business hours with flexibility as projects require Location: Onsite Bonus: This position is bonus eligible Benefits • Medical, dental, and vision coverage beginning the first of the month after 30 days • 401(k) with company match after 6 months • Paid vacation, sick time, personal and community days, plus company holidays • Company provided safety shoes twice per year • Bi weekly team lunches and company sponsored events Equal Opportunity Employer Sibanye Stillwater Reldan is an equal opportunity employer dedicated to fostering a diverse and inclusive workplace where every employee feels valued and empowered. Ready to Engineer Impact If you are ready to apply your technical expertise, project execution skills, and commitment to safety to a team that values quality and continuous improvement, apply today. Join Sibanye Stillwater Reldan and help us build a cleaner, safer, and more sustainable future.