Maintenance technician jobs in Sebring, FL - 346 jobs

Concept The Fleet Technician I performs operations, technical and administrative duties for the Fleet Services Section. The most important and essential job function of the position is attitude which includes the following: interacting positively and cooperating with co-workers, responding politely to customers, working as a team member, functioning under intense time pressure and responding in a positive manner to supervision. The Fleet Technician I shall perform other related duties and tasks, as required and shall have the physical, mental and emotional abilities to perform the essential job duties of the position. Employee Benefits Medical, Dental, Vision 10 Paid Holidays Paid Time Off Direct Deposit, Bi-Weekly Pay Checks Tuition Reimbursement Education Incentive Free Employee Health Clinic Wellness Incentives FRS Retirement Employee Assistance Program (EAP) Free Employee Gym Life Insurance Deferred Compensation Plan Essential Functions Supervise trustees Perform shop maintenance Loan out vehicles Prepare impounded vehicle for release Maintain spare units Function as on call technician Prepares collision damage estimates Install and remove decals on equipment Perform automotive maintenance and repair Perform collision damage repair Utilize diagnostic equipment Perform emergency equipment repair and installation Perform welding Perform removal of equipment Perform maintenance on other equipment Process work orders Respond during natural disasters Work flexible hours Education, Professional Certification or License High School or GED *ASE Certification preferred Florida driver's license, CDL preferred Must attain sixteen (16) Continuing Education Units (CEUs) on an annual basis Professional Experience Two (2) years' documented experience in the automotive or collision repair field, or completed an automotive or collision repair program from a technical college or vocational school. Environmental Conditions Outdoor work in extreme temperatures Knowledge of Safety procedures PCSO policy and procedures Diagnostic equipment Automobile repair Emergency equipment Appropriate forms Ability to Operate a variety of vehicles Operate office equipment Follow written and verbal instructions Read and write English Skills Basic housekeeping Interpersonal Mechanical Mathematical Physical Requirements See at a normal range or with accommodation Hear at a normal range or with accommodation Speak English understandably Manual dexterity Walk Stand for long periods Sit for long periods Bend/squat Kneel Lift 100 lbs. Stoop Ambulate independently Ability to work in extreme weather Other *ASE: Automotive Service Excellence Equal Employment Opportunity Employer M/F/D/V Min USD $45,059.04/Yr. Max USD $61,410.54/Yr.

JOB PURPOSE To repair electromechanical systems and related equipment throughout retail locations to support operations and minimize asset downtime. RESPONSIBILITIES Accepts a continual development program to provide maintenance services across all retail trading assets & infrastructures. Maintain Electromechanical systems and related assets. Maintains food production and catering equipment. Ensures the trading environment is well lit at all times. Establish effective regular communication with Site Management to ensure they are kept informed of all ongoing maintenance activities. Liaise with site management team to ensure that all planned maintenance activities are communicated effectively. Provide all required job updates on a timely basis. Maintain all assets for which you have responsibility to the highest standards. Maintain clean and safe conditions in machine and electrical rooms. Participate in company's “on call” after hours' emergency call program. Assist with trouble shooting problems. Complete equipment inventories as assigned. Perform other job-related duties as assigned. Act in accordance with all company policies & procedures. QUALIFICATIONS & EXPERIENCE Minimum Qualifications Possesses a valid driver's license with a good driving record. High school diploma or equivalent. Journeyman Electrician or relevant experience Ability to read, write and speak English proficiently. Ability to understand and follow English instructions. Authorization to work in the United States or the ability to obtain the same. Successful completion of pre-employment drug testing and background check. In-depth working knowledge of supermarket electrical systems (HV, LV) HVAC and plumbing systems preferred. Demonstrated self-motivation and successful experience in previous jobs and responsibilities. Above average troubleshooting and guest service skills. Ability to multitask, work with limited supervision and make sound decisions quickly. Exceptional interpersonal, motivational and communication skills. High standard of integrity and reliability. ABOUT CITY FM City Facilities Management (US) LLC is a leader in end-to-end integrated facilities management for some of the top retailers and grocers across the nation. Through our unparalleled self-performance team of highly skilled technicians, customer service gurus, energy experts and more, City FM delivers exceptional service quality and cost savings using a holistic, data-driven approach to facilities management. With offices in Jacksonville, FL and Burlington, MA since 2016, City FM is part of the global City family founded nearly 40 years ago. Its parent company, City Facilities Management Holdings Limited, is the largest privately held facilities management firm in the world with over 15,000 employees across five continents with headquarters in Glasgow, Scotland. WHY SHOULD YOU WORK AT CITY FM? City FM is part of a global network of leading facilities management, professional services, and data-driven sustainability solutions, for starters. Also, we offer a generous benefits package that includes 28 days of PTO along with a 401(k) match with immediate vesting and company match. We don't just hire anyone at City FM; we're looking for loyal team members with a deep sense of responsibility and a thirst for constant learning and growth with a willingness to always lend a helping hand. When you join City FM, you're committing to making a difference. We make a commitment to you too - helping you embark on a career with purpose! Whether through our world-class training programs, over 1,500 e-learning classes through City University or Leadership Development framework - City FM cares passionately about the people we hire and ensures that growth is always on the horizon. Wondering if your values align with ours? If you put clients first, care passionately about what you do and are committed to working on a team that respects each other, you will fit right in! So, if you're ready to get started, we're ready for you. City FM is An Affirmative Action / Equal Opportunity Employer. The Company has a Drug-Free Workplace Policy in effect that is strictly adhered to.

Job Description Shape the Night: Keep High-Speed Lines Running At KIK Consumer Products, we make trusted cleaning and pool-care brands that safeguard homes and families. As one of North America's largest independent consumer product manufacturers, we bring ideas to life through accountability, collaboration, agility, and unwavering ethics. Join a team that has your back and thrives on solving problems together. Your Shift, Your Impact As our 3rd Shift Maintenance pro, you're the person production counts on when it matters most. Picture this: it's 11:15 pm and a conveyor photo-eye is tripping-within minutes you've traced the issue, verified voltage, and restored flow with minimal downtime. That's the kind of craftsmanship and ownership you'll bring every night. Schedule & Pay Regular shift: Monday-Friday, 8:30 pm-5:00 am, with rotating Saturdays Training period: First 30 days on 1st shift (Monday-Friday, 4:30 am-1:00 pm) with rotating Saturdays Compensation: $30.00-$33.00 per hour, plus a $1.00 shift differential for hours worked after 1st shift; pay is negotiable based on experience and skill set What You'll Tackle Independently diagnose and repair equipment issues in your area with minimal supervision Troubleshoot pneumatic and hydraulic systems with confidence Work on bottling and filling equipment, gantry palletizers, and related automation Resolve mechanical breakdowns using skills in mechanics, fitting, plumbing, basic welding, metal fabrication, machining, and root-cause analysis Respond quickly to equipment calls with a customer-first mindset Perform electrical work: wire connections, relays, photo-eyes, solenoids; diagnose/wire motors; troubleshoot VFDs; safely work with 120v-480v; proficiently use a multimeter and read schematics Execute preventative maintenance and safety inspections Modify, install, repair, and troubleshoot conveyors (roller, belt, Intralox, gravity, chain plate) Diagnose, rebuild, and replace a variety of pump types Use a CMMS to document emergency and planned work; communicate clearly with stakeholders Install, maintain, improve, and troubleshoot machinery across processing and packaging areas Set up, take down, and relocate processing and packaging equipment; reconfigure lines for new products Apply general shop and fabrication skills: grinders, saws, presses, lathes, and mills Work in accordance with Health and Safety and GMP regulations; wear a full-face respirator when required What You Bring 2+ years of mechanical experience in high-speed packaging and/or manufacturing (food industry strongly preferred) High school diploma or GED; strong, clear communication Hands-on success in a manufacturing environment Interpersonal savvy, critical thinking, and problem-solving strengths Time management and organization-able to juggle changing priorities Physical Capabilities Occasionally exert 20-50 lbs. of force (up to 1/3 of the time) Frequently apply 10-25 lbs. of force (1/3 to 2/3 of the time) Regularly handle up to 10 lbs. throughout the shift (2/3 or more of the time) Comfort with climbing, balancing, stooping, kneeling, crouching, crawling, reaching, and handling Ability to visually inspect parts and hear alarms/equipment signals, with or without accommodation Preferred Proficiencies Creating preventive maintenance plans; preventive maintenance and inspection Mechanical troubleshooting skills 120/208/240/480 voltage systems Pneumatics troubleshooting Maintenance and repair skills Tools & Technologies You'll See Labeling systems; packaging machines; conveyor systems Liquid fill pumps and equipment Variable Frequency Drives (VFD) Blow molding machines Programmable Logic Controllers (PLC) What You'll Get We know pay matters as you plan your next step. Actual compensation may vary based on your skills, experience, time in role, business line, and location. About KIK We manufacture and market the products people rely on to clean, sanitize, and protect their homes and pools. With 16 manufacturing facilities across North America and operations in Canada, Europe, and Australia, our portfolio includes well-known names like Spic and Span and Comet cleaning products, Clorox Pool&Spa™ (under license), BioGuard , and Natural Chemistry pool chemicals. We're also North America's #1 producer of private-label bleach and a leading private-label provider of laundry detergent and additives, dishwashing products, general-purpose cleaners, and other home care items. More than 2,300 global team members power our strengths in product development, formulation, sourcing, manufacturing, packaging design, brand marketing, project management, quality, compliance, distribution, and logistics. Guided by our One KIK values, we keep promises in a customer-focused, performance-driven way-never compromising on safety, ethics, or integrity. Equal Opportunity & Accommodations KIK is an Equal Employment Opportunity / Affirmative Action employer. KIK does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information or any other status protected by law. KIK is also committed to providing reasonable accommodations for applicants and employees with protected disabilities to the extent required by applicable laws. If you require a reasonable accommodation to participate in the job application, or interview process, or to perform the essential functions of the job, please contact Human Resources immediately. Privacy Policy Privacy Policy: ************************************************

Starship Technologies is revolutionizing deliveries with autonomous robots. These robots are designed to deliver food, groceries, and packages across college campuses and neighborhoods in minutes. Starship has now completed millions of autonomous deliveries to date, traveled millions of miles and is currently doing more than 140k road crossings each day. Our contribution to society includes reducing congestion, and pollution, providing zero-emissions deliveries, increasing the quality of life for residents, empowering seniors and disabled people, and enabling affordable delivery for local businesses. We're hitting records on an almost weekly basis. Now is an exciting time to join as we grow rapidly around the world! The environment will be similar to a fast-paced restaurant/workshop while allowing you to plunge into a cutting-edge technological environment working directly with our autonomous robots. Our Robot Technicians will execute robot fleet repair throughout the shift, troubleshoot unexpected situations that may arise, and work effectively to keep our robots in operation. Job Responsibilities: Technical Tasks: * Maintaining the health of our global fleet of robots through daily maintenance and repair tasks. Which can include but is not limited to - diagnosing unforeseen problems, troubleshooting equipment malfunctions, and repairing or replacing faulty equipment (tires, electronics, motors). * Carrying out preventive maintenance activities and upgrades on robots and infrastructure. Monitoring and servicing our internal systems, running tests and completing reports, and completing updates or improvements to existing systems as appropriate. * Perform root cause analysis to identify the causes of faults or problems and systematically develop a solution to prevent/solve underlying issues. Operational Tasks: * Accurately document all tasks/partner or internal messaging related to service concerns or robot-related issues using appropriate applications/tools. * Maintain a clean and organized hub by performing accurate spare parts inventory audits twice a week and ensuring all tools are accounted for and returned to their proper location after use. * Work with our engineering team to identify any potential improvements regarding robot health and design. * Assist our Operational Team and vendors/merchants by providing in-person assistance through performing weekly Merchant Preflights to understand any service-related issues, provide operational and troubleshooting assistance related to Starship-provided devices, and act as a Starship brand representative while interacting with clients. * Occasionally support our Operational Service team by assisting with Robot field rescues or operational services tasks when needed. * Other duties as assigned. Minimum Qualifications: * A passion for robots and innovative technologies. * Currently pursuing a degree in Engineering or another related STEM field. * Previous experience in Technical Support and with any service desk application is beneficial, but not required. * Good knowledge regarding mechanics, electronics, and IT. * Excellent client-facing skills. * Self-starter; takes initiative, can work without supervision and begin projects independently. Experience & Education Requirements: * Knowledge of Unix/Linux systems, CLI tools, and scripting preferred, but not required. * Hobby projects in electronics or mechanics. * Previous experience in managing a large fleet of devices. Physical Requirements: * Movement ability to frequent usage of wrists, hands and finger dexterity to movements such as constant typing, as well full-body exertion while wrangling the robot fleet. * Occasional lifting of items with weight up to 70 lbs. * Comfortable riding an ebike on various terrain. What's in it for you? * Opportunity to work on industry-leading self-driving delivery robot technology on a uniquely large scale, creating history and making things happen * You can immerse yourself in the world of technology and innovation * You will have a chance to work with people with a strong inner burning and motivation. We are self-aware and seek feedback and improvement. We don't want to wait until we are told what needs to be done but take it as a matter of pride to figure out solutions for topics in various teams and areas * You'll have endless opportunities to learn from our inspirational, talented team members across the globe Ready to join our Starship fleet? Apply today! Job Type: Part-time with flexible hours Only candidates who send resumes will be considered. Please include your availability when applying. Early application is encouraged. Check out our website to find out more about us: ************************ Department US Operations Locations Lakeland, FL Employment type Part-time

Job Description Training Students to be Tomorrow's Aircraft Maintenance Technician About Us A&P Mechanic Institute (formerly International AeroTech Academy) is now part of the Phoenix East Aviation family. This Part 147 AMT training school was begun in 2020 in Lakeland, FL as a quality institution dedicated to advancing the field of aviation maintenance through exceptional education and training. A&P Mechanic Institute is a growing organization that is part of the Phoenix East Aviation organization with three flight school locations in the state of Florida and one in Georgia. At APMI, you'll become part of a small dynamic team of educators, all united by a shared passion for delivering quality aircraft maintenance training and ensuring our students' success. We are committed to equip the next generation of aircraft technicians with the skills and knowledge needed to excel in the aviation industry. If you are willing to make a change in your career and make a positive impact in helping to shape the future of aviation maintenance, we at APMI offer you a rewarding environment where your contributions will truly matter. Position Purpose The Aircraft Mechanic Instructor is responsible for delivering engaging and comprehensive instruction in assigned courses, ensuring that students grasp both theoretical concepts and practical applications in aircraft maintenance. In addition to teaching, the instructor manages essential administrative tasks, such as maintaining records, assessing student performance, and collaborating with faculty to enhance the curriculum. This role is pivotal in fostering a supportive learning environment that promotes student success and prepares them for careers in the aviation industry. Key Competencies: Provide engaging and effective teaching in aircraft maintenance principles that aligns with industry standards. Create a positive classroom atmosphere that encourages student participation and offers individualized support to enhance student success. Oversee administrative responsibilities, including maintaining accurate records and ensuring compliance with FAA regulations and standards. This position ensures that the aircraft maintenance training program effectively prepares students for careers in aviation, aligning with industry standards and contributing to the overall success of A&P Mechanic Institute. Job Responsibilities Teach classes on a scheduled basis, creating an inclusive and welcoming environment that fosters student engagement and enhances learning in aircraft maintenance. Assist the Director to develop and refine curriculum, prepare course materials, and schedule classes, ensuring alignment with industry standards. Maintain a clean, organized, and safe classroom and laboratory environment, ensuring all tools and equipment are properly maintained for student use. Establish and maintain accurate academic and attendance records for each student, submitting attendance, grades, evaluations, and other documentation as required by International AeroTech Academy's policies and procedures.. Proactively notify the Director of any current or potential issues that require immediate attention and implement proven retention techniques to support student success. Assist in managing the inventory of equipment and supplies, submitting replenishment requests to the Director as needed. Monitor student attendance closely. Complete other tasks and projects as assigned by the Director, contributing to the overall success of the aircraft maintenance training program. Required Qualifications FAA Airframe and Powerplant Mechanic Certificate High School Diploma or GED Minimum three (3) years of hands-on experience in aircraft maintenance (special considerations will be given for more diverse experience) Strong command of both theoretical and practical aspects of aircraft maintenance, with contemporary knowledge and a commitment to ongoing professional development. Detail-oriented, analytical, and highly organized. Demonstrate a high level of integrity, a strong work ethic, and professionalism in all interactions. Effective verbal and written communication skills, with a strong emphasis on customer service in an educational context. Highly motivated and goal-oriented, with strong problem-solving abilities. Ability to work independently as well as collaboratively within a team, exhibiting exceptional interpersonal skills. Be proficient in computer skills, including proficiency in MS Office applications such as Word, and PowerPoint. Preferred Qualifications Associate or a bachelor's degree in a related field Experience Instructing Schedules Applicants will be considered for one of the following schedules: Option 1: Monday - Friday: 7:15 am - 3:00 pm Option 2: Monday - Friday: 5:30 pm - 10:30 pm Work Environment Enjoy a relatively stress-free work environment with no weekend or off-shift work. Be part of a collaborative team that welcomes your input. Community Lakeland is a vibrant community conveniently located along I-4 between Tampa and Orlando. With a population just over 120,279, the city limits cover 75.16 square miles. Lakeland has many lakes that are community focal points, providing scenic areas for recreation. In fact, much of Lakeland's culture and iconic neighborhoods are built around the 38 named lakes found in the community. Downtown Lakeland is a vital and enjoyable place for residents and visitors. It has been dubbed "Lakeland's living room" and truly embodies the community spirit of Lakeland. There are quaint shops, casual restaurants, pubs, craft breweries and fine-dining experiences to be found in and around the historic brick buildings that surround the historic Munn Park town square. The City embraces its past and that is evident strolling the tree lined, brick streets in the historic neighborhoods found throughout Lakeland. The area is home to Southeastern University, Florida Polytechnic University, Polk State College's Lakeland campus, and Florida Southern College. Join us at A&P Mechanic Institute to be part of a dedicated team and advance your career in an iconic and growing city. What We Offer The salary for this position ranges from $60,00.00 per year, based on experience, qualifications, and other relevant factors. In addition to a competitive base salary, we offer a comprehensive benefits package, including: 401(k): Secure your future with our competitive retirement savings plan. Comprehensive Health Coverage: Enjoy Health, Dental, and Vision insurance to keep you and your family healthy. We are committed to providing a rewarding compensation package that supports both your professional growth and personal well-being. Job Type: Full-time Benefits: 401(k) Dental insurance Employee discount Health insurance Life insurance Paid time off Retirement plan Vision insurance Schedule: Day shift Evening shift Monday to Friday No weekends Ability to Relocate: Lakeland, FL 33811: Relocate before starting work (Required) Work Location: In person

Founded in 1990, LGH stands at the forefront of the hoisting and rigging equipment rental industry, providing rental equipment responsible for the installation, maintenance, and repair of everything from the bridges you drive on to the sports stadiums you visit. We have an immediate need for a mechanically inclined individual to join our team where youll play a crucial role in maintaining our top-notch rental equipment, guaranteeing its immediate availability for safe utilization. In this position, you will have the opportunity to leverage your mechanical knowledge to: · Prepare rental equipment orders and conduct inspections to ensure compliance with our quality standards. · Disassemble, troubleshoot, repair, reassemble and test various types of electrical, hand operated, hydraulic, and pneumatic equipment. · Perform routine preventative maintenance on rental equipment. · Operate forklift to load and unload delivery vehicles and transport equipment within the warehouse as part of daily operations. · Drive company vehicles to transport rental orders in a safe and timely manner. Hours: Monday Friday (8:00 a.m. 4:30 p.m.) Full Time; Occasional overtime may be required. Location: Lakeland, FL Minimum Starting Pay: $22.00 / hour · You may also be eligible for a $1.00/hour increase after 6 months of employment, plus annual performance increases at 1 year and each year thereafter. Benefits: Paid holidays, sick, and vacation time; full benefits package including medical, dental, vision, short term disability, basic life insurance, plus additional optional voluntary benefits; vested 401(k) with 5% company match; continual, comprehensive, industry-leading training program. Requirements: Education/Training: High School Diploma or equivalent required. Experience: · Mechanical background or aptitude strongly preferred. · Hand and power tool experience desired. · Experience working on air hoists, comealongs, manual hoists, electric hoists or other rigging equipment beneficial, but not required. Certifications/Licenses: · Valid Driver's License with good driving record and the ability to meet insurance underwriting guidelines required. · DOT certification required upon commencement of employment (at LGH expense); certification must be maintained. Physical Requirements: · Must be able to push/pull up to 50 lbs. · Must be able to lift/carry up to 55 lbs. All employment offers are contingent upon the ability to pass the following: Background Check & Employment Verifications Hair Follicle Drug Test We are interested in every qualified candidate who is legally authorized to work in the United States. However, we are not able to sponsor work visas. ************************ PIa62c208ab915-31181-39166847

Job Title: Millwright Ironworker FLSA: Full-Time/ Non-Exempt Reports to: Field Foreman COMPANY INFORMATION: FUSE is an acronym: For United States Employment. FUSE Fabrication started with a vision to employ Americans'. Since 2010, we have been dedicated to hiring and training professionals in a diverse set of disciplines and have transformed from a Custom Sheet Metal shop to a State-of the-Art manufacturing facility. FUSE Fabrication's turn-key approach helps clients at every step of the process from design to installation, and even offers on-going maintenance. Fuse Fabrication is a specialized sheet metal fabrication company in Central Florida. Our turn-key operation features high-quality, American-made fabricated and machined products that are competitively priced. We also create lasting relationships with our customers. By investing time and attention to detail for your project we act as your partner, ensuring the best possible outcome. Quality is our number one goal. Responsibilities: * Disassemble & reassemble equipment for repair, installation, or transportation. * Installation and/or decommissioning of equipment/machinery. * Review & interpret engineering specifications, schematics, & blueprints to determine work procedures * Transfer equipment to the applicable site for maintenance to avoid contamination or safety hazards. * Hand Tools: Use wide range of hand tools including but not limited to, measuring tools, welding & torch cutting. * Determine which machines, techniques, and tools to use when moving and installing equipment. * Visit various job sites all over state of Florida. Requirements: * A minimum of 3 years' experience as a Millwright. * In-depth knowledge of construction equipment and machinery. * Completion of Millwright certificate program. * Math Skills: Strong attention to detail with excellent mathematical skills. * Team Player: Must be able to work well with a team. * OSHA and MSHA: Must have general knowledge of OSHA and MSHA standards. * Operating/Signaling Heavy Machinery: Must have general knowledge of operating/signaling heavy machinery such as: Man lift, Telehandler, & Crane. * Communication: Great communication skills. * High school diploma or equivalent and a valid driver license. Skills Needed: * Centrifugal Pumps * Torque Bolts * Fabricating * Rotary Pumps Air Compressor * Conveyors * Hydraulics * Jig Bore Grinding * Gearbox * Pneumatics * Rigging * Reservoirs * Schematics * Welding Apply Now Back to Careers

Mechanic II General Purpose Under limited supervision, the Mechanic II is responsible for moderate to advanced repair and preventive maintenance of industrial laundry equipment and related systems. This includes troubleshooting, diagnosing, and repairing mechanical, electrical, pneumatic, and facility systems in a fast-paced, high-volume production setting. Duties and Responsibilities Follow all safety protocols and demonstrate safety awareness throughout each shift Perform preventive maintenance (PM) tasks and maintain accurate service logs Troubleshoot and repair mechanical, electrical, and pneumatic equipment issues Replace worn or faulty machine components (mechanical and electrical) Read and interpret electrical schematics and technical diagrams Conduct basic welding, plumbing, and general facility maintenance tasks Support plant operations by completing opening and closing equipment procedures Look up and request parts using manuals, inventory systems, or online resources Mentor junior mechanics on routine maintenance and troubleshooting Collaborate with the maintenance team and assist with project work or additional duties as needed This position description is not intended to be an exhaustive list of all duties, responsibilities, and qualifications. An individual must be able to perform all duties listed in a fully competent manner to be considered successful. Reasonable accommodations may be made to enable individuals with disabilities to perform essential duties and responsibilities. Qualifications 3+ years of experience in industrial maintenance, preferably within commercial laundry, manufacturing, or high-volume production environments High school diploma or GED required; completion of a technical or trade school program is a plus Working knowledge of mechanical, electrical, pneumatic (especially conveyor belts), and automation systems, including experience with PLCs, VFDs, and industrial control systems Ability to read and interpret technical diagrams, wiring schematics, and blueprints Familiarity with using CMMS (Computerized Maintenance Management Systems) to manage maintenance activities and track equipment performance Basic understanding of low- and high-voltage systems, as well as HVAC controls, thermostats, and boiler operations Ability to perform basic welding tasks (acetylene or arc welding) for equipment maintenance and minor fabrication Exposure to root cause analysis, Lean, or TPM methodologies to support equipment reliability and reduce downtime Good communication and organizational skills with the ability to prioritize tasks and work independently or as part of a team Bilingual in English and Spanish is a plus, especially in team-based environments Certifications in electrical safety, HVAC, welding, or other relevant trades are preferred Working Place: Haines City, Florida, United States Company : June 26th Virtual Fair - Crown Linen

Multi Skilled Handyman - Ace Handyman Services Lakeland needs your expertise! We are affiliated with the Ace Hardware brand and one of the top-rated handyman, repair, and remodeling companies across the USA and growing! We provide homes and businesses throughout Polk County with quality craftsmanship for all their repair, maintenance, and remodeling projects - both large and small - inside and outside. We are currently seeking highly motivated professional Multi Skilled Handymen. If you are looking for a W2 position that allows you the flexibility of an independent job, look no further! We find and schedule the jobs for you, and you provide the quality craftsmanship and customer service that our clients have come to expect from us. You will work out of your home on your choice of a full time or part-time basis, using your own truck or van (or company vehicle) to travel to job sites in Polk County and nearby areas. Your potential income can range from $20 to $25 per hour, and we also provide benefits and performance bonuses. If this sounds like the kind of position you've been looking for, and if you meet our qualifications, we want to hear from you. Contact us today! Here is just some of what we have to offer: Health insurance Company vehicle Vacation Performance bonuses Vehicle and tool allowance Company credit card Flexible scheduling Advancement and growth opportunities Consistent year-round work Plus more! Job RequirementsWe are looking for experienced Handymen with a strong work ethic, a professional appearance and demeanor, and a good overall knowledge of all trades-from Carpentry, Tiling, Painting, and Drywalling to light Plumbing and Electrical. You must also display excellent customer service skills, including solid communication and interpersonal abilities, and the ability to interact in a positive way with a wide variety of different types of clients, as well as fellow employees, management, and office personnel. Specific qualifications for the role include: Successful prior track record as a Carpenter / Craftsman Ability to perform minor electrical and plumbing Own standard set of tools to perform all of the above trades Current and valid driver's license Excellent troubleshooting and problem-solving skills Strong documentation and invoicing skills Project estimating skills Professional appearance and demeanor Ability to pass a background check Take control of your schedule, your earnings and your career! Apply now! Compensation: $20.00 - $25.00 per hour The 800+ Craftsmen who represent our Brand are the heart and soul of our turn-key, white-glove home repair, maintenance, and improvement service. They are skilled and experienced in many trades, but their professionalism and attention to detail is what sets them apart from others who work in the industry. Most of the projects completed are for Repeat and Referral Customers-folks truly appreciate our high level of service, and they often request additional work by asking for particular Craftsmen by name. If you take great pride in your skills and abilities and wish to join a proven, winning TEAM, please apply to the position(s) available by selecting "Show Me All Jobs" above. Ace Handyman Services is a franchise network of Independently Owned and Operated Franchises. Your application will go directly to the franchise owner, and all hiring decisions will be made by the management of that franchise. All inquiries about employment at this franchise should be made directly to the franchise owner, and not to Ace Handyman Services Corporate.

Job DescriptionSalary: $20-$29 Hourly DOE About the Role: The Gas Tech III is an integral position in the process of construction, maintenance, replacement, and repair of natural gas distribution infrastructure. This position is an operator qualified position with working experience in the use of fusion equipment and pipefitting procedures. The position may also be required to travel to various work locations based on SabCon Underground clients needs and deliver optimum customer service, operate mini excavator, HDD, other tasks as assigned. Essential Functions: Ability to lead construction, maintenance, and repair projects, ensuring efficient and safe operations with minimal supervision from Foreman Ability to assist the Foreman perform complex diagnostics and troubleshooting of gas systems and pipelines. Ability to assist the Foreman with understanding and managing project schedules, resources, and compliance with safety and regulatory standards. Oversee and mentor junior and mid-level technicians Act as the secondary point of contact for management and other stakeholders during projects Interpret blueprints, schematics, and technical drawings. Work safely while performing new construction, maintenance, replacement or repair work as it relates to natural gas polyethylene piping. Performs pipe fitting/connections and tie-ins for polyethylene pipe sizes predominately 2 and below. Pipe joining techniques range from butt or socket fusion, electrofusion, or mechanical coupling. Installation of EFVs & Valves Inspect and test piping systems for leaks. Pressure Test/Pigging PE Pipe Understand the proper use and maintenance of fusion equipment and hand tools. Frequently work around live gas systems and other utilities during hand digging functions to locate said utilities. Exercise due care in protecting the utilities life and other property. Maintains company vehicles, equipment and tools for proper working order. Able to perform rigorous physical labor such as using a shovel, erection of road signs, and use of pneumatic and engine driven equipment. Capable of working on a team, receiving and following directions. Possess a basic knowledge of materials used in natural gas infrastructure work. Must be able to acquire operator qualifications to perform covered tasks as needed. Understands OSHA competent person standards. Provide GPS Points when required from customer Testing and classifying soils Sloping and shoring standards Understands when to wear personnel protective equipment. Works in trenches and bell holes. Able to identify different types of materials used in natural gas infrastructure work. Must be able to work outside, frequently in inclement weather. Does all other related work as required to complete the job. Required Qualifications: Experience: 3-5+ years in gas or pipeline construction, maintenance, or operations. High school diploma or GED Certifications: Leadership certifications, Operator Qualification (OQ) for advanced gas tasks, NACE, or API 1169. Valid drivers license. Commercial Drivers License is strongly preferred. Able to travel long distances on short notice, when required. Able to work for extended periods in various locations, when required. Able to lift in excess of 50 lbs.. Willing to work outside of the normal work schedule including weekends, holidays, and overtime as required for the position Competencies: Self-Motivated Team-Oriented Customer Oriented Must be able to follow Company safety rules and all other Company policies. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk, use hands/fingers to handle or feel, reach with hands and arms. Work Environment: While performing the duties of this job, the employee is frequently exposed to dirt, fumes, or airborne particles, moving mechanical equipment and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The employee may be subject to one or more of the following atmospheric conditions that may affect the respiratory system from fumes, odors, mists, or gases. The noise level in the work environment and job sites can be loud. This position is performed in outside weather conditions.

Department: Services Reports to: Shop Supervisor FLSA Status: Non-Exempt About the Role Join our Services team as a Valve Technician, where you'll play a critical role in servicing and repairing industrial valves and actuators both in-shop and on-site. You'll collaborate with customers, suppliers, account managers, and internal teams to deliver high-quality mechanical solutions. Key Responsibilities Inspect, repair, and test a wide range of valves: control, safety, relief, gate, globe, check, ball, butterfly, and plug Service pneumatic, hydraulic, and electric actuators Perform full-cycle valve repair: pre-testing, disassembly, cleaning, machining, lapping, painting, assembly, and final inspection Calibrate and test valves and related instrumentation Document repair activities including failure analysis, parts used, and corrective actions Set up and dismantle repair equipment at shop and field locations Provide technical support and troubleshooting to customers Follow National Board VR/UV program guidelines Comply with site-specific safety protocols Maintain a clean and organized work environment Participate in Safety and Quality program Physical Requirements Lift up to 44 lbs Perform twisting, turning, and lifting motions Climb stairs, ladders, and scaffolding (10-30+ feet) Work in varied environments including heat, cold, and clean rooms Travel Overnight travel required Work performed at Control Southern facilities and customer sites Qualifications 1-3 years of experience in valve, pump, or actuator repair preferred Welding and machining skills are a plus Valid driver's license and insurability under company policy Core Competencies Strong verbal and written communication skills Mechanical aptitude and technical troubleshooting ability Effective time management and task focus Team-oriented with a commitment to safety Familiarity with rigging and handling heavy equipment Ability to operate overhead cranes, forklifts, sand blasters, seat facing machines, and power tools Flexibility to work off-hours, weekends, and overtime as needed

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here. Job Posting External Job Duties * Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. * Perform all assigned planned maintenance on customer lift trucks. * Maintain a service van and its inventory. * Process paperwork after completion of each job. Minimum Qualifications * Less than 2 years related experience * High school diploma or equivalent * Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications * Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. * Good written/verbal communication and customer care skills. * Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. * Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. * Industry related training is preferred * Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: * Award-Winning Service Training Company Vehicle for Field Service Technicians Tool Insurance No Flat Rate 40 Hours Per Week plus Overtime Uniforms Specialty Tools Primarily 1st Shift Career Advancement Opportunities EOE Veterans/Disabilities Nearest Major Market: Lakeland Job Segment: Warehouse, Forklift, Diesel Mechanic, Maintenance, Maintenance Mechanic, Manufacturing

Job DescriptionDescription: Aruza is a people-focused organization dedicated to providing exceptional pest control services while fostering personal and professional growth for our team members. We are a dynamic and fast-growing organization at the forefront of transformational change. We are committed to process improvement, innovation, and building a talented team to drive our mission forward. As a Pest Control Utility Technician with us you will be helping to create our customer's experience and drive our well-established service standards. The ideal candidate will have boundless energy and the enthusiasm to provide genuine care to new customers while providing them peace of mind about the safety and comfort of their home and surroundings. In this role you will inspect and perform pest control treatments for customers using high-quality and environmentally responsible products. You'll follow a daily schedule of services while exemplifying excellent customer service and professionalism. Long hours of standing and lifting are required. Must be able to lift 50 lbs and drive a company vehicle. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Principal Duties and Responsibilities: Follow a daily schedule, insuring timely arrival at each account Inspect and perform pest control treatments for customers using high-quality and environmentally responsible products Demonstrate excellent communication skills as you interact with customers, office staff, and service managers Must possess a high level of professionalism and integrity Requirements: Excellent communication and organizational skills to provide exceptional customer service Highly motivated and able to work independently Maintain a clean and professional appearance at all times Must have a current and valid driver's license and pass an MVR check Able to lift up to 50 lbs Continually exposure to outside weather conditions Frequently required to climb, balance, bend, stoop, kneel or crawl Frequently inspect and treat crawl space and attic areas of home Why ARUZA ? Aggressive pay structure with considerable bonus potential upon productivity Generous Paid Time Off and Holiday package 401K plan with progressive company match Health, dental and vision insurance plans to meet your individual needs Supplemental insurance coverage options to offer further protection for you and your family Supplemental Insurance Packages Company culture fostering personal growth and success Company vehicle and gas card for business use provided Paid training Paid for state and government licensing The Pest Management Industry is growing - and is a recession resistant line of business Aruza Pest Control is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law.

Aruza is a people-focused organization dedicated to providing exceptional pest control services while fostering personal and professional growth for our team members. We are a dynamic and fast-growing organization at the forefront of transformational change. We are committed to process improvement, innovation, and building a talented team to drive our mission forward. As a Pest Control Utility Technician with us you will be helping to create our customer's experience and drive our well-established service standards. The ideal candidate will have boundless energy and the enthusiasm to provide genuine care to new customers while providing them peace of mind about the safety and comfort of their home and surroundings. In this role you will inspect and perform pest control treatments for customers using high-quality and environmentally responsible products. You'll follow a daily schedule of services while exemplifying excellent customer service and professionalism. Long hours of standing and lifting are required. Must be able to lift 50 lbs and drive a company vehicle. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Principal Duties and Responsibilities: Follow a daily schedule, insuring timely arrival at each account Inspect and perform pest control treatments for customers using high-quality and environmentally responsible products Demonstrate excellent communication skills as you interact with customers, office staff, and service managers Must possess a high level of professionalism and integrity Requirements Excellent communication and organizational skills to provide exceptional customer service Highly motivated and able to work independently Maintain a clean and professional appearance at all times Must have a current and valid driver's license and pass an MVR check Able to lift up to 50 lbs Continually exposure to outside weather conditions Frequently required to climb, balance, bend, stoop, kneel or crawl Frequently inspect and treat crawl space and attic areas of home Why ARUZA ? Aggressive pay structure with considerable bonus potential upon productivity Generous Paid Time Off and Holiday package 401K plan with progressive company match Health, dental and vision insurance plans to meet your individual needs Supplemental insurance coverage options to offer further protection for you and your family Supplemental Insurance Packages Company culture fostering personal growth and success Company vehicle and gas card for business use provided Paid training Paid for state and government licensing The Pest Management Industry is growing - and is a recession resistant line of business Aruza Pest Control is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law.

Job title: Facilities Technician Reporting to: Site Services Manager The Opportunity Day to day responsibilities in supporting the facilities department goals and objectives. Interface with contractors onsite to preform preventative maintenance or repairs. Perform basic plumbing and electrical repairs as needed within the office and lab areas. Perform assigned preventative maintenance (PM) activities as assigned What it's like to work here We've been making the world taste better since 1886 and sell over 3000 products in more than 90 countries, but we're only just getting started. We're on an exciting journey and have ambitious plans to become the indispensable partner of choice for the world's leading flavor and fragrance houses, beverage and consumer brands. On joining Treatt, you'll become one of over 300 international experts, working together to collectively surprise and delight our customers. Nothing is more important to us than the happiness of our people as without them, we'd never succeed. We think Treatt's a great place to work, but don't just take our word for it: "Everyone wants your feedback and opinion; it feels like a place of study where nurturing and encouragement are the standard. It is very clear the hard work that goes into providing excellence for customers, but it is also very apparent that managers have the same goals for helping us all to progress." - Anita, Innovation Scientist "Joining my close and supportive team was the most enjoyable way to gain more skills and increase my knowledge" - Ashley, Distillation Control Team Leader "Treatt creates an environment to help you be the best you can, with no two days the same and opportunities always available to help you learn and develop. The people and the culture create a fantastic company to be part of" - Rebecca, Commercial Coordinator What you'll be doing * Perform all Utility related Monitoring and Inspection Preventative Maintenance (PM) activities. * Relay any issues or repairs to appropriate department. * Respond to emergency calls for facilities related issues. * Perform routine maintenance of buildings such as fixing structural damage like window, door, and wall repair, and/or painting. * Assist the Maintenance department as needed with repairs on utility related equipment. * Preform daily site survey as defined in standard operating procedures. * Investigate air conditioning, general plumbing, and electrical issue within office areas. * Repair minimal issues within these areas. * Provide initial assessment for major repairs to supervisor. * Assist with office moving and assembly of any furniture for all office areas. * Assist in proper segregation and disposal of plant waste. * Ensure effective processes and systems are put in place and documented to enable accurate data within JD Edwards, which supports good inventory practises. What we're looking for * High School Diploma or equivalent (GED) with 1 - 2 years of experience. * Knowledge of basic plumbing and electrical repair desirable * Knowledge of basic HVAC systems desirable. * Knowledge of basic painting, carpentry installation of fixtures desirable. * Knowledge of Good Manufacturing Procedures (GMP). We want you to love your work and bring that energy to the job every day, no matter what the task. You'll be someone who keeps up to date with the latest technologies and is always willing to share their knowledge with colleagues. Our department is busy. We need someone who can run with the pack but also bring their own personality to their work. You should be personable, friendly and supportive, acknowledging that you'll get to work with colleagues from all seniority levels across all departments on a daily basis. What we'll do for you We offer an excellent package which includes a competitive salary; vacation time as well as the opportunity to purchase additional vacation, we also offer a discretionary annual bonus, medical (including family cover), dental and vision coverage, AFLAC, 401k employer matching up to 6%, company-paid short term and long term disability insurance, company-paid life insurance and stock purchase options. With the encouragement and development, you need, we help you to become your ultimate you. Beyond building a successful career, we also support the wishes and ambitions of our staff outside of the office in achieving a health work/life balance - the wellbeing of our staff is paramount to us, which we actively promote and support by regularly delivering a variety of wellbeing initiatives. There will also be opportunities to be actively involved in community and charity projects and to take part in numerous subsidized social events. M/F/D/V EOE DFWP SO Polite Notice We politely request that we are not contacted by any recruitment agencies. We have a preferred supplier list and high volumes of speculative calls from agencies negatively impact upon the efficiency of our business. Please help us to maintain the highest levels of customer service by respecting our wishes.

KSB is a leading supplier of pumps, valves and related service. Our reliable, high-efficiency products are used in applications wherever fluids need to be transported or shut off, covering everything from building services,industry and water transport to waste water treatment, power plant processes and mining. Founded in 1871 in Frankenthal, Germany, the company has a presence on all continents with its own sales and marketing organisations and manufacturing facilities. Around the globe, more than 190 service centres and around 3,500 service specialists are on hand to provide local inspection, servicing, maintenance and repair services under the KSB SupremeServ brand. Innovative technology that is the fruit of KSB's research and development activities forms the basis for the company's success. People. Passion. Performance. It is these three success factors that make KSB the company it is today. At KSB, we recognise that it is people who actually make the difference - the people we employ and the people we serve. This is why we are committed to equal rights and treatment worldwide and never lose sight of the aspects ecology and sustainability when manufacturing our products. Utility Technician KSB SupremeServ by KSB GIW, Inc. Department: Florida Service Reports to: Service Center Operations Manager Location: Mulberry, FL Shift: 1st FLSA Status: Hourly OVERVIEW: The Utility Technician, under the direction of the Service Center Operations Manager, will perform tasks and duties to assist in all Operational areas. Some responsibilities will include, but are not limited to, urethane, paint, sandblast, facilities, and assembly. You will ensure that day-to-day duties are carried out efficiently to achieve on time delivery and meet the demands of the Service Center. You will conduct work activities in a professional manner that positively reflects the image of KSB GIW, Inc., its Health and Safety Policies, and conforms to current Health and Safety legislation. RESPONSIBILITIES: Executes all work in accordance with KSB GIW Inc. policies and procedures Ensures all work is carried out in a clean and safe environment as per current Health and Safety legislation Provides support throughout the Florida Service Center based on business needs to include locating and retrieving parts to prepare for urethane, paint, sandblast and assembly Ability to accurately measure various chemicals for different processes to include but not limited to the paint and urethane process Prepares various products with the use of measurement equipment such as viscosity cups, thickness gauges, gloss gauges, curative ratios using formula and % theory using an understanding of chemistry to mix the appropriate compounds for the job task Accurately select the appropriate paint or urethane for the assigned task to maintain compliance with KSB GIW, Inc. procedures Locates/retrieves and prepares industrial rotating equipment components for assigned task and follows the appropriate process associated with the task to be completed Uses a variety of techniques and tools best suited to paint on primers, pre-finishes and finishing coats onto surfaces of pump/gearbox assemblies and components to meet KSB GIW, Inc. requirements taking care to avoid unnecessary damage of components. Other unfamiliar product types may be required from time to time. Thoroughly examines industrial rotating equipment components after completion by means of visual inspection ensuring conformance to KSB GIW Inc. requirements. Other unfamiliar product types may be required from time to time. Prepares completed pump/gearbox assemblies and components for shipping department by fitting appropriate data tags, warning tags, identification tags and applying appropriate corrosion protective coatings to unpainted surfaces, installing blank covers to pump suction and discharge flanges and any other open flange or fitting connection. Responsible for maintaining required inventory of supplies for the paint department Responsible for housekeeping on the respective shift and work areas Ensures and mandates proper operation of all equipment while monitoring tool and equipment condition and maintenance status Assists and trains fellow employees with daily functions as and when required Ensures all Quality Standards are always maintained and adhered to Ensures safe/correct lifting of parts and adheres to Health and Safety/Environmental legislations upholding KSB GIW, Inc. Health and Safety Policy. Carries out all other tasks that may be occasionally delegated QUALIFICATIONS: A minimum of 3 years' experience in a previous industrial coating role (experience with industrial rotating equipment components is considered a plus) General mechanical skills required Must be able to work overtime on short notice as and when required Ability to use various types of painting equipment, hand and power tools Ability to select and mix various chemicals to include paint and urethane to required mix ratio Ability to differentiate between colors Must be able to wear appropriate personnel protective equipment for paint, sandblasting and urethane Ability to use and read various types of precision measuring equipment. Ability to read and interpret technical and safety data sheets and work procedures Operates forklifts and cranes as and when required Willing to pursue further education and training as needed Possesses good judgment and decision-making skills Promotes safety and housekeeping at all times Adheres to Company guidelines, rules, and policies regarding attendance, punctuality and safety Performs at a high standard in each area of responsibility Attention to detail Familiar and understanding of painting technics and processes Ability to work independently and as a team member Ability to work under pressure Performs tactical and strategic problem solving and ability to make good, sound decisions Assists in implementation of Service Center goals Makes recommendation to supervisors and manager for improvements PHYSICAL REQUIREMENTS: Depending upon the particular needs of the area/department, physical requirements may include, but are not limited to lifting up to 70 lbs., squatting, pulling, kneeling, pushing, and bending KSB SupremeServ by KSB GIW, Inc. is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. KSB SupremeServ by KSB GIW, Inc. makes hiring decisions based solely on qualifications, merit, and business needs at the time. KSB Group is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. KSB makes hiring decisions based solely on qualifications, merit, and business needs at the time. We value employees who take the initiative and are committed to our company; Employees who take responsibility and for whom business success is the focus of their actions. In return, we offer fair framework conditions for collective wages and pensions, flexible working time models, individual training opportunities and the best career prospects.

KSB is a leading supplier of pumps, valves and related service. Our reliable, high-efficiency products are used in applications wherever fluids need to be transported or shut off, covering everything from building services,industry and water transport to waste water treatment, power plant processes and mining. Founded in 1871 in Frankenthal, Germany, the company has a presence on all continents with its own sales and marketing organisations and manufacturing facilities. Around the globe, more than 190 service centres and around 3,500 service specialists are on hand to provide local inspection, servicing, maintenance and repair services under the KSB SupremeServ brand. Innovative technology that is the fruit of KSB's research and development activities forms the basis for the company's success. People. Passion. Performance. It is these three success factors that make KSB the company it is today. At KSB, we recognise that it is people who actually make the difference - the people we employ and the people we serve. This is why we are committed to equal rights and treatment worldwide and never lose sight of the aspects ecology and sustainability when manufacturing our products. Utility Technician KSB SupremeServ by KSB GIW, Inc. Department: Florida Service Reports to: Service Center Operations Manager Location: Mulberry, FL Shift: 1st FLSA Status: Hourly OVERVIEW: The Utility Technician, under the direction of the Service Center Operations Manager, will perform tasks and duties to assist in all Operational areas. Some responsibilities will include, but are not limited to, urethane, paint, sandblast, facilities, and assembly. You will ensure that day-to-day duties are carried out efficiently to achieve on time delivery and meet the demands of the Service Center. You will conduct work activities in a professional manner that positively reflects the image of KSB GIW, Inc., its Health and Safety Policies, and conforms to current Health and Safety legislation. RESPONSIBILITIES: * Executes all work in accordance with KSB GIW Inc. policies and procedures * Ensures all work is carried out in a clean and safe environment as per current Health and Safety legislation * Provides support throughout the Florida Service Center based on business needs to include locating and retrieving parts to prepare for urethane, paint, sandblast and assembly * Ability to accurately measure various chemicals for different processes to include but not limited to the paint and urethane process * Prepares various products with the use of measurement equipment such as viscosity cups, thickness gauges, gloss gauges, curative ratios using formula and % theory using an understanding of chemistry to mix the appropriate compounds for the job task * Accurately select the appropriate paint or urethane for the assigned task to maintain compliance with KSB GIW, Inc. procedures * Locates/retrieves and prepares industrial rotating equipment components for assigned task and follows the appropriate process associated with the task to be completed * Uses a variety of techniques and tools best suited to paint on primers, pre-finishes and finishing coats onto surfaces of pump/gearbox assemblies and components to meet KSB GIW, Inc. requirements taking care to avoid unnecessary damage of components. Other unfamiliar product types may be required from time to time. * Thoroughly examines industrial rotating equipment components after completion by means of visual inspection ensuring conformance to KSB GIW Inc. requirements. Other unfamiliar product types may be required from time to time. * Prepares completed pump/gearbox assemblies and components for shipping department by fitting appropriate data tags, warning tags, identification tags and applying appropriate corrosion protective coatings to unpainted surfaces, installing blank covers to pump suction and discharge flanges and any other open flange or fitting connection. * Responsible for maintaining required inventory of supplies for the paint department * Responsible for housekeeping on the respective shift and work areas * Ensures and mandates proper operation of all equipment while monitoring tool and equipment condition and maintenance status * Assists and trains fellow employees with daily functions as and when required * Ensures all Quality Standards are always maintained and adhered to * Ensures safe/correct lifting of parts and adheres to Health and Safety/Environmental legislations upholding KSB GIW, Inc. Health and Safety Policy. * Carries out all other tasks that may be occasionally delegated QUALIFICATIONS: * A minimum of 3 years' experience in a previous industrial coating role (experience with industrial rotating equipment components is considered a plus) * General mechanical skills required * Must be able to work overtime on short notice as and when required * Ability to use various types of painting equipment, hand and power tools * Ability to select and mix various chemicals to include paint and urethane to required mix ratio * Ability to differentiate between colors * Must be able to wear appropriate personnel protective equipment for paint, sandblasting and urethane * Ability to use and read various types of precision measuring equipment. * Ability to read and interpret technical and safety data sheets and work procedures * Operates forklifts and cranes as and when required * Willing to pursue further education and training as needed * Possesses good judgment and decision-making skills * Promotes safety and housekeeping at all times * Adheres to Company guidelines, rules, and policies regarding attendance, punctuality and safety * Performs at a high standard in each area of responsibility * Attention to detail * Familiar and understanding of painting technics and processes * Ability to work independently and as a team member * Ability to work under pressure * Performs tactical and strategic problem solving and ability to make good, sound decisions * Assists in implementation of Service Center goals * Makes recommendation to supervisors and manager for improvements PHYSICAL REQUIREMENTS: Depending upon the particular needs of the area/department, physical requirements may include, but are not limited to lifting up to 70 lbs., squatting, pulling, kneeling, pushing, and bending KSB SupremeServ by KSB GIW, Inc. is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. KSB SupremeServ by KSB GIW, Inc. makes hiring decisions based solely on qualifications, merit, and business needs at the time. KSB Group is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. KSB makes hiring decisions based solely on qualifications, merit, and business needs at the time. We value employees who take the initiative and are committed to our company; Employees who take responsibility and for whom business success is the focus of their actions. In return, we offer fair framework conditions for collective wages and pensions, flexible working time models, individual training opportunities and the best career prospects.

What you'll bring to the team About the role... Maintains, repairs, and installs various equipment, hardware, and maintenance accessories as directed by the Facilities Team Leader and/or Facilities Supervisor. Contributes to many areas of general repair and maintenance and assists other skilled trades in performing preventative maintenance and rehabilitation projects. What you'll be doing... Accountable for all work assignments and schedules. Support other operations as it applies to facilities maintenance. Propose new ideas and initiatives to the facilities leadership team as it relates to facilities responsibilities and objectives. Keeps safety as #1 priority. Ensures that all equipment and work areas are kept clean, neat, and orderly at all times. Ensures compliance with internal maintenance, safety and security procedures by following established State and local codes and loss prevention guidelines, as well as company policies and procedures. Operates simple machine and hand tools, such as screw drivers, wrenches, pliers, battery drills, power saws, grinders, etc. Recognizes equipment that needs repair, replacing, or adjusting and reports it to the facilities leadership team. Keeps tools, machines, and all other company equipment in clean and proper working order. Follows established maintenance program including, predictive maintenance, preventative maintenance, and emergency repairs as required to acceptable standards. Attends department training, supplemental courses and seminars to stay abreast of updated technical information and products. Responds to emergency calls for repairs and maintenance as directed by the Facilities Team Leader and/or Facilities Supervisor. Ensure adherence to the LEGOLAND brand by adhering to dress codes and ethics of conduct. Work in a safe effective manner by which departmental goals can be achieved. Attend and comply with all LEGOLAND required developmental classes and/or other training/development opportunities. Attend daily staff meetings for purpose of directing, informing and training. Liaison between maintenance employees and other departments. Physical Demands: Intermittent and prolonged standing and walking to move about the park Resort site and interact with employees. Ability to climb stairs/ladders to gain access to upper level of buildings. Finger dexterity sufficient to complete paperwork activities and to use a computer. Visual acuity sufficient to read written materials to complete paperwork activities. Hearing sufficient to communicate with individuals in person and by telephone. Work Environment: Various inside and outside locations with varying temperatures and floor surfaces. Exposed to wet and/or humid conditions. Other Job Requirements: Performs other duties as assigned. Must be willing to work flexible hours, including evenings, overnight, holidays, and weekends to support park Resort operations. Must have valid driver's license, safe driving record. Attendance is a mandatory function of this job. Health and Safety Employees are responsible for the safety of themselves, their colleagues and guests (where appropriate), in line with the Group Policy (HS001) and the law. In particular, they must ensure that they follow safe working procedures for all work activities that they undertake and they must not use any tools or equipment for which they have not been trained. Where incidents do occur, they must ensure that they are reported to their line manager and must cooperate with any investigation as appropriate. Qualifications & Experience Who we're looking for... Requires a minimum of one year of experience in facilities maintenance and repair. Considerable knowledge of the practices, tools, and equipment used to troubleshoot, and repair electromechanical systems, lighting, carpentry and plumbing is required. Must be able to react under pressure or in an emergency in a calm and rational manner. Ability to read and evaluate reports and correspondence. Must be proficient in basic math skills. Must have a demonstrated focus on guest service. Demonstrated ability to follow supervisor's directions effectively and observe and remember details. Education: High school graduate or General Education Degree (or equivalent education and experience) is required. Benefits What you'll get... In addition to a fun and friendly environment, you will also find competitive salary free entry to LEGOLAND Florida Resort (which also extends to family and friends) 30% discount on LEGOLAND Florida Resort food, beverage and retail products, tuition assistance, free unlimited usage of the local transit system Furthermore you will enjoy continuous support and opportunities to branch out and develop your career within LEGOLAND and Merlin Entertainments! ** Please consider whether you'll be able to travel to and from the Resort. Some shifts may fall into unsociable hours. ** About Merlin Entertainments LEGOLAND Florida Resort is part of Merlin Entertainments. A business built on fun, Merlin is a global leader in location based, family entertainment. As Europe's Number 1 and the world's second-largest visitor attraction operator, Merlin now operates over 100 attractions, 15 hotels, and 6 holiday villages in 24 countries and across 4 continents. Our aim is to deliver unique, memorable, and rewarding experiences to millions of visitors across our growing estate of the best-known names in global leisure. Everyone Matters at Merlin. At Merlin we welcome the world to our magical attractions and resorts every day and we want to reflect that same multicultural mix inside our business too. We strive to create an inclusive and diverse workplace where people can be themselves, have the same opportunities and thrive together. Because at Merlin, everyone matters! Together, we work to create a workplace where everyone feels valued, no matter their age, race, gender, disability or sexual orientation. Although we understand that we'll always be learning and growing, we aim to be the most inclusive and flexible employer in our industry. Pay Range Competitive

Our Lakeland, FL location is looking to hire a Utility Technician for the 2nd Shift! This position is responsible for assisting mechanics in dismantling and reassemble of basic motors and cleans parts. Acts as a floater through AC/DC Departments filling in as needed. Here's What You'll Do: * Assist Motor Technicians with the dismantling and reassembly of motors. * Cleans and transport parts as needed. * Provide general maintenance support in Utility Department. * Assist mechanics/technicians and other departments in skilled and non-skilled duties as directed by shop management. * Operate various pieces of equipment including a buffer, hand and air tools, sand blasting, forklifts and hoists. * Follow established procedures/work instructions for assigned function. * Handle materials in accordance with established procedures. * Work in a timely manner to ensure customer needs are fulfilled and deadlines are met. Work at a pace that meets expected productivity goals. Here's What You'll Need: * High school diploma or equivalent is required. * One (1) year of hands-on mechanical experience preferred. * Ability to perform basic math functions including addition, subtraction, multiplication, and division. * Ability to read, write, and comprehend simple written and verbal instructions. * Ability to understand, perform, and retain various job related training, operational, and safety procedures. * Ability to exercise initiative, judgment, and decision making related to routine duties within set company standards. * Ability to operate overhead cranes, fork lift trucks, and other equipment. * Ability to wear respirator.